Results for igt@i915_pm_rpm@basic-rte

Result: Fail

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g2741053c5 (x86_64) (Linux: 6.5.0-rc7-linus-v6.5-rc7-g706a74159504+ x86_64)
Out 
Starting subtest: basic-rte
Opened device: /dev/dri/card0
Runtime PM support: 1
PC8 residency support: 0
DMC: fw loaded: yes
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 1
PCI device power state: D3hot [3]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
Stack trace:
  #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert()
  #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:875 __igt_unique____real_main2421()
  #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main()
  #3 [__libc_start_main+0xf3]
  #4 [_start+0x2e]
Subtest basic-rte: FAIL (21.844s)
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 1
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: no
Usage count: 3
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915]
   __intel_runtime_pm_put+0x159/0x2b0 [i915]
   intel_display_power_flush_work+0xdf/0xf0 [i915]
   intel_dp_detect+0x231/0x640 [i915]
   drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
Wakeref count: 3
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_set_edid+0x3f/0x2a0 [i915]
   intel_hdmi_detect+0xb7/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
Wakeref x1 taken at:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   gmbus_xfer+0x29/0xb0 [i915]
   __i2c_transfer+0x17b/0x580
   i2c_transfer+0x7e/0x100
   drm_do_probe_ddc_edid+0xb7/0x130
   drm_edid_read_ddc+0x72/0x80
   intel_hdmi_set_edid+0x242/0x2a0 [i915]
Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432:
Test requirement: setup_environment(true)
Err 
Starting subtest: basic-rte
(i915_pm_rpm:5285) igt_pm-WARNING: timeout: pm_status expected:suspended, got:resuming
(i915_pm_rpm:5285) CRITICAL: Test assertion failure function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2424:
(i915_pm_rpm:5285) CRITICAL: Failed assertion: setup_environment(true)
Subtest basic-rte failed.
**** DEBUG ****
(i915_pm_rpm:5285) drmtest-INFO: Opened device: /dev/dri/card0
(i915_pm_rpm:5285) DEBUG: Test requirement passed: drm_fd != -1
(i915_pm_rpm:5285) DEBUG: Test requirement passed: debugfs != -1
(i915_pm_rpm:5285) igt_kms-DEBUG: VT: graphics mode set (mode was 0x0)
(i915_pm_rpm:5285) igt_kms-DEBUG: display: init {
(i915_pm_rpm:5285) igt_chamelium-DEBUG: No configuration file available for chamelium
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     DP-1: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     DP-1: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     DP-2: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     DP-2: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     HDMI-A-1: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: display:     HDMI-A-1: Selecting pipe None
(i915_pm_rpm:5285) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes || !display->pipes[pipe].enabled)
(i915_pm_rpm:5285) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes || !display->pipes[pipe].enabled)
(i915_pm_rpm:5285) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes || !display->pipes[pipe].enabled)
(i915_pm_rpm:5285) igt_kms-DEBUG: display: }
(i915_pm_rpm:5285) igt_pm-DEBUG: Failed to enable audio runtime PM! (3)
(i915_pm_rpm:5285) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto'
(i915_pm_rpm:5285) INFO: Runtime PM support: 1
(i915_pm_rpm:5285) INFO: PC8 residency support: 0
(i915_pm_rpm:5285) DEBUG: Test requirement passed: has_runtime_pm
(i915_pm_rpm:5285) igt_pm-INFO: DMC: fw loaded: yes
(i915_pm_rpm:5285) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs)
(i915_pm_rpm:5285) INFO: i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 0
PCI device power state: D0 [0]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_atomic_commit+0x25/0x400 [i915]
   drm_atomic_commit+0x95/0xc0
   drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper]
   drm_mode_setcrtc+0x1ec/0x740
   drm_ioctl_kernel+0xb6/0x150
   drm_ioctl+0x21d/0x420
   __x64_sys_ioctl+0x7c/0xb0
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
(i915_pm_rpm:5285) igt_pm-WARNING: timeout: pm_status expected:suspended, got:resuming
(i915_pm_rpm:5285) igt_debugfs-INFO: i915_runtime_pm_status:
Runtime power status: enabled
GPU idle: yes
IRQs disabled: yes
Usage count: 1
PCI device power state: D3hot [3]
Wakeref last acquired:
   track_intel_runtime_pm_wakeref+0x18/0xc0 [i915]
   intel_display_power_get+0x24/0x70 [i915]
   intel_hdmi_detect+0x88/0x160 [i915]
   drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper]
   check_connector_changed+0x47/0x1b0 [drm_kms_helper]
   drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper]
   i915_hpd_poll_init_work+0xaf/0xf0 [i915]
   process_one_work+0x251/0x500
Wakeref last released:
   __untrack_all_wakerefs+0x6f/0x80 [i915]
   untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915]
   intel_runtime_suspend+0xe1/0x260 [i915]
   pci_pm_runtime_suspend+0x5d/0x1a0
   __rpm_callback+0x3f/0x110
   rpm_callback+0x58/0x70
   rpm_suspend+0x118/0x5f0
   pm_runtime_work+0x9f/0xb0
Wakeref count: 0
(i915_pm_rpm:5285) CRITICAL: Test assertion failure function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2424:
(i915_pm_rpm:5285) CRITICAL: Failed assertion: setup_environment(true)
(i915_pm_rpm:5285) igt_core-INFO: Stack trace:
(i915_pm_rpm:5285) igt_core-INFO:   #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert()
(i915_pm_rpm:5285) igt_core-INFO:   #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:875 __igt_unique____real_main2421()
(i915_pm_rpm:5285) igt_core-INFO:   #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main()
(i915_pm_rpm:5285) igt_core-INFO:   #3 [__libc_start_main+0xf3]
(i915_pm_rpm:5285) igt_core-INFO:   #4 [_start+0x2e]
****  END  ****
Subtest basic-rte: FAIL (21.844s)
(i915_pm_rpm:5285) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active
Dmesg
<6> [100.781617] Console: switching to colour dummy device 80x25
<6> [100.781745] [IGT] i915_pm_rpm: executing
<6> [100.796910] [IGT] i915_pm_rpm: starting subtest basic-rte
<7> [100.796992] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [100.797389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [100.797409] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.797614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.798134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.798274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [100.798381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [100.798394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.798608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.799106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.799650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.800221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.801335] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.802415] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.803171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.803326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.803534] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.803720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.804307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.804450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [100.804531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [100.804544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.804673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.805801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.805924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.806616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.807116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.807121] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.807240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.836236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.836241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.836356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.836545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [100.840118] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [100.840134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.840262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.840781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.840920] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [100.841386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [100.841400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.841577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.842044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.842574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.843152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.844373] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.845151] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.845874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.846029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.846167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.846303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.846988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.847129] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [100.847603] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [100.847618] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.847744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.848820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.848938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.849683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.850139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.850144] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.850260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.878686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.878704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.878819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.878955] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [100.879256] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]
<7> [100.879269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [100.879391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.879925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.880078] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected
<7> [100.880103] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]
<7> [100.880115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [100.880266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.880809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [100.881250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [100.881824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [100.882986] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [100.884067] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [100.884844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [100.885000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [100.885138] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [100.885272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [100.885942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.886126] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected
<7> [100.886154] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]
<7> [100.886166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [100.886290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [100.887420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.887566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [100.888302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [100.888838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.888842] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [100.888970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [100.916349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [100.916354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [100.916470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [100.916663] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected
<7> [111.960931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [111.968605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [111.992672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.000192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.000894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.001166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.002294] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [112.002172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.002645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.002943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.003289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.003967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.004682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.005025] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.005361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.006187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.006573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.007614] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [112.007648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.010514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.034896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.038411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.038537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.039031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.039556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.040117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.041400] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.042368] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.043162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.043353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.043540] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.043703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.044330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.044524] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.044640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.044828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.045302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.045879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.046024] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.046164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.046803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.047020] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [112.046984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.049359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.073793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.078497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.078666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.078817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.079281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.079863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.080017] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.080158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.080759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.080914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.082012] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.084521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.108895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.113599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.113759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.114894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.115055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.115785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.116280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.116287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.116442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.141064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.141071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.141238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.141450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.143019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.143204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.145522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.169858] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.175284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.175427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.175993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.176271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.176306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.176533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.177056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.177583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.178131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.179310] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.180151] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.180729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.180939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.181125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.181304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.181961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.182157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.182178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.182345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.183515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.183675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.184404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.184915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.184922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.185077] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.211355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.211359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.211474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.211687] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.213374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.213396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.214536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.238889] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.242437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.242554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.243025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.243168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.243187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.243313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.243797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.244298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.244882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.246095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.246882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.247642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.247801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.247940] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.248076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.248686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.248830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.248846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.248972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.250047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.250168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.250856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.251359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.251365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.251493] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.275525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.275530] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.275656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.275798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.277306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.277448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.279545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.303939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.307556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.307681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.308160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.308312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.308332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.308467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.308952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.309496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.310059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.311217] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.312011] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.312762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.312920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.313059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.313206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.313818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.313963] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.313979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.314104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.315180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.315300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.316021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.316523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.316529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.316645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.342299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.342304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.342419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.342612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.344212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.344328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.345483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.369922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.375089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.375215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.375746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.375929] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.375951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.376084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.376625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.377123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.377694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.378937] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.380005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.380763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.380922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.381061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.381195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.381807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.381951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.381967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.382092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.383164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.383283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.383981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.384461] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.384466] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.384614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.410838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.410842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.410972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.411113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.412641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.412779] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.414172] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.438576] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.443239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.443371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.443900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.444052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.444072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.444223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.444757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.445229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.445814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.446962] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.448052] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.448810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.448968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.449107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.449242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.449852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.449997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.450013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.450138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.451208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.451329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.452022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.452512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.452519] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.452656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.477786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.477791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.477919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.478063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.479096] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.479238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.480536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.504839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.508379] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.508499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.508970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.509114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.509133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.509258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.509755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.510249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.510851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.512058] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.513149] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.513879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.514036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.514210] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.514403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.515064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.515247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.515270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.515399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.516509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.516628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.517310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.517850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.517855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.517974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.543110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.543115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.543231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.543374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.545006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.545027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.546396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.570809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.575676] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.575811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.576294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.576450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.576471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.576619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.577100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.577632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.578176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.579427] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.580509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.581289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.581451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.581600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.581736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.582324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.582470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.582492] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.582617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.583697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.583816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.584518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.584993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.584998] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.585115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.611349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.611354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.611467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.611680] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.613182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.613324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.614483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.638913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.642464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.642582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.643048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.643192] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.643211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.643337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.643819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.644327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.644896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.646094] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.647047] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.647808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.647968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.648109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.648246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.648860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.649006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.649022] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.649147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.650229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.650347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.651035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.651533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.651538] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.651654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.675681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.675686] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.675813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.675956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.677456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.677618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.679002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.703419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.707007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.707118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.707606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.707758] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.707778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.707913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.708388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.708916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.709498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.710514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.711510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.712270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.712428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.712580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.712716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.713314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.713456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.713472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.713608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.714700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.714822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.715485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.716017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.716022] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.716138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.741298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.741303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.741422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.741607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.743161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.743273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.744484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.768888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.774312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.774435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.775007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.775152] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.775172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.775314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.775830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.776336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.776933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.778203] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.779291] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.780048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.780206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.780344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.780495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.781086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.781232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.781248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.781373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.782498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.782620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.783288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.783821] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.783826] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.783942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.809602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.809607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.809740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.809883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.810910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.811060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.812494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.836791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.840853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.840971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.841438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.841607] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.841627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.841818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.842344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.842857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.843429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.844722] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.845810] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.846616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.846772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.846935] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.847067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.847666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.847808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.847824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.847947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.849014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.849130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.849846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.850384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.850391] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.850571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.879018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.879023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.879140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.879286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.880782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.880935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.882338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.906728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.912142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.912272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.912778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.912984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.913010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.913169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.913697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.914185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.914757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.915841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.916942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.917677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.917836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.917976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.918111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.918726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.918873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.918889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.919017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.920089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.920208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.920954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.921468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.921490] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.921643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [112.948458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.948463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [112.948628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.948882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [112.950448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [112.950591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [112.951978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [112.976341] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [112.979976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [112.980086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.980575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.980725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [112.980752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [112.980934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.981471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [112.981978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [112.982555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [112.983796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [112.984849] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [112.985513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [112.985673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [112.985813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [112.985949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [112.986553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [112.986700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [112.986716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [112.986845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [112.987928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.988050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [112.988750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [112.989262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [112.989269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [112.989443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.015721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.015726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.015858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.016002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.017662] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.017693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.019075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.043458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.047590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.047690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.048159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.048302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.048321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.048445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.048946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.049447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.050044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.051241] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.052355] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.053114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.053274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.053413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.053592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.054241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.054430] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.054446] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.054597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.055679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.055801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.056496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.056999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.057004] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.057122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.082847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.082853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.082969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.083114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.084645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.084795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.086150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.110512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.114107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.114210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.114694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.114870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.114889] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.115016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.115512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.116010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.116612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.117952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.119053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.119809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.120034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.120227] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.120370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.121001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.121156] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.121171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.121297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.122376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.122505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.123201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.123729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.123734] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.123879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.149087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.149095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.149305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.149531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.151118] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.151317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.153812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.177630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.184047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.184263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.184829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.185078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.185103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.185315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.185909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.186413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.186993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.188260] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.188930] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.189615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.189840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.190037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.190231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.190915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.191164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.191189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.191370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.193081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.193284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.194011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.194609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.194617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.194801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.222735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.222743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.222929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.223135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.225282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.225488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.226895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.251280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.254906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.255015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.255501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.255669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.255696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.255882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.256408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.256931] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.257499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.258744] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.259851] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.260510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.260670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.260810] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.260945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.261544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.261689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.261705] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.261830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.262930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.263049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.263759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.264277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.264284] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.264455] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.289123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.289129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.289245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.289390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.290921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.291076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.292511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.316807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.320891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.321024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.321504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.321678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.321698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.321892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.322428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.322946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.323515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.324758] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.325836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.326617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.326834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.326985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.327120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.327722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.327867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.327883] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.328013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.329085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.329203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.329899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.330404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.330409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.330572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.355778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.355784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.355912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.356056] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.357566] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.357718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.359106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.383519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.387675] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.387779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.388247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.388391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.388410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.388593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.389153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.389686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.390226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.391340] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.392433] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.393192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.393415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.393628] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.393790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.394391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.394554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.394570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.394699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.395790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.395912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.396611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.397113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.397118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.397234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.423468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.423474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.423624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.423865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.425053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.425075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.426417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.450767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.455530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.455636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.456118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.456311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.456337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.456560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.457099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.457634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.458172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.459290] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.460374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.461013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.461173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.461312] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.461449] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.462079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.462250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.462266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.462394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.463505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.463624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.464313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.464842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.464850] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.465023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.490807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.490812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.490942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.491086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.492584] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.492790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.494180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.518546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.522624] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.522728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.523195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.523339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.523358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.523504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.524028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.524566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.525127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.526380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.527460] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.528253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.528426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.528580] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.528717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.529305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.529450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.529466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.529610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.530682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.530804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.531503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.532006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.532013] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.532187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.557417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.557422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.557602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.557847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.559384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.559534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.560918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.585310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.590305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.590414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.590913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.591119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.591144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.591293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.591783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.592283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.592854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.593982] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.595083] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.595858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.596016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.596157] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.596292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.596914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.597113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.597128] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.597250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.598353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.598473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.599443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.599966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.599973] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.600140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.627530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.627535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.627665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.627809] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.629325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.629521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.630892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.655260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.660123] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.660265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.660798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.661002] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.661028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.661187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.661676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.662176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.662750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.663991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.664791] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.665512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.665671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.665811] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.665947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.666561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.666707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.666723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.666849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.667928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.668077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.668844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.669357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.669364] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.669527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.696341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.696346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.696463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.696666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.698256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.698415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.699539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.723852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.727404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.727521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.727992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.728134] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.728154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.728280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.728762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.729265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.729858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.731092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.732222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.732983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.733143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.733344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.733555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.734206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.734360] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.734376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.734518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.735609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.735729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.736400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.736923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.736928] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.737044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.763785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.763791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.763937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.764081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.765590] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.765743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.767179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.791572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.795693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.795826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.796293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.796448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.796470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.796717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.797246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.797804] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.798330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.799457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.800511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.801293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.801495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.801674] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.801807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.802391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.802571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.802610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.802774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.803919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.804035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.804562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.805016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.805023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.805188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.830402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.830408] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.830588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.830854] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.832392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.832532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.833920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.858283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.862896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.863004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.863493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.863756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.863782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.863966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.864445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.864974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.865546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.866704] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.867808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.868515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.868674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.868813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.868949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.869560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.869706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.869722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.869848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.870927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.871082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.871846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.872335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.872341] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.872463] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.899246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.899251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.899367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.899571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.901181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.901340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.902502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.926808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.930885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.931018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.931499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.931712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.931738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.931921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.932446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [113.932974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [113.933547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [113.934698] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [113.935798] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [113.936451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [113.936674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [113.936839] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [113.936976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [113.937578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.937723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [113.937739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [113.937867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.938969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.939091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [113.939797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [113.940317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.940324] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [113.940512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [113.967278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [113.967283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [113.967400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.967628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [113.969260] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [113.969399] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [113.970527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [113.994830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [113.998390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [113.998507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.998977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [113.999122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [113.999140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [113.999267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [113.999761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.000250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.000844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.002052] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.003146] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.003878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.004036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.004187] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.004378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.005045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.005203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.005219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.005346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.006442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.006574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.007249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.007798] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.007804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.007920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.036319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.036324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.036441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.036627] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.038257] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.038398] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.039504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.063805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.067359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.067466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.067949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.068092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.068111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.068235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.068716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.069225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.069832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.071141] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.072211] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.072977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.073205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.073392] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.073549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.074138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.074284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.074300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.074425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.075508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.075627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.076320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.076847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.076854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.077026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.104383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.104389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.104540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.104783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.105854] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.105997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.107395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.131764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.135844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.135978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.136446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.136617] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.136638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.136821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.137358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.137866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.138427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.139681] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.140786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.141442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.141621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.141760] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.141896] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.142495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.142640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.142656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.142785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.143864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.143983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.144685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.145185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.145192] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.145362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.170053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.170059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.170174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.170317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.171849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.172002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.173391] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.197730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.203129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.203276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.203780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.203986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.204013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.204173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.204705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.205190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.205763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.206840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.207950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.208726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.208885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.209024] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.209160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.209761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.209906] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.209922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.210051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.211129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.211251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.211976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.212514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.212522] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.212694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.237333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.237338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.237458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.237630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.238732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.238867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.240150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.264554] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.269136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.269263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.269756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.269900] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.269919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.270097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.270634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.271167] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.271754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.272840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.273928] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.274689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.274915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.275092] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.275232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.275851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.276026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.276042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.276166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.277252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.277370] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.278342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.278893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.278900] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.279099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.305355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.305360] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.305494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.305749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.307298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.307418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.308842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.333234] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.337411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.337555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.338069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.338276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.338301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.338510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.339024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.339548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.340099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.341226] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.342054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.342841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.343000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.343140] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.343274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.343888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.344033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.344049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.344174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.345244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.345365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.346132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.346661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.346669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.346790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.373634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.373639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.373756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.373901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.375430] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.375619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.377044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.401429] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.405018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.405118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.405601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.405807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.405826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.405951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.406419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.406950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.407518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.408823] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.409916] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.410679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.410877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.411078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.411245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.411854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.412000] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.412016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.412145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.413204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.413323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.413962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.414529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.414536] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.414706] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.440452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.440458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.440610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.440879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.442420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.442554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.443941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.468303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.472493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.472628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.473146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.473343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.473369] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.473565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.474066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.474593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.475153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.476381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.477510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.478272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.478431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.478595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.478757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.479346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.479511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.479527] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.479687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.480790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.480964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.481735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.482227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.482232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.482349] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.509148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.509153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.509270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.509414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.510974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.511126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.512515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.536808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.540907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.541041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.541535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.541761] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.541787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.541970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.542521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.543012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.543573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.544755] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.545851] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.546518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.546716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.546853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.546984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.547610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.547776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.547792] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.547914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.548624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.548762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.549443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.549966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.549973] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.550119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.575799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.575804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.575920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.576064] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.577106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.577270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.578542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.602919] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.606516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.606636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.607102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.607241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.607260] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.607381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.607917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.608415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.608977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.610101] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.611252] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.612055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.612283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.612462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.612619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.613237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.613384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.613400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.613543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.614651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.614796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.615499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.615999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.616006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.616180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.642423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.642428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.642578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.642847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.644389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.644512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.645881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.670274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.674446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.674579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.675106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.675309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.675335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.675560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.676077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.676588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.677139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.678380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.679177] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.679748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.679906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.680045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.680180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.680832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.681013] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.681029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.681153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.682244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.682415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.683196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.683708] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.683715] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.683836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.710093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.710099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.710215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.710360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.711950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.712111] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.713515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.737808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.741899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.742032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.742529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.742740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.742766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.742950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.743498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.743991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.744563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.745759] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.746872] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.747538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.747713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.747854] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.747989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.748595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.748745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.748764] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.748891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.750012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.750171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.750864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.751335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.751340] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.751460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.779899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.779908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.780054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.780210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.781247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.781394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.783830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.808243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.811850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.811983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.812449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.812619] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.812639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.812816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.813347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.813871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.814431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.815695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.816784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.817525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.817706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.817845] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.817981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.818586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.818731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.818746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.818873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.819934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.820053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.820755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.821255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.821262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.821433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.851039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.851070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.851232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.851383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.853028] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.853221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.854507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.878808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.882318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.882425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.882940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.883113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.883132] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.883259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.883754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.884251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.884857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.886040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.887139] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.887884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.888042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.888225] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.888419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.889082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.889241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.889258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.889389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.890489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.890611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.891298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.891831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.891837] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.891956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.919317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.919322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.919440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.919671] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.921297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.921438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.922869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [114.947260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [114.951395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [114.951542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.952074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.952276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [114.952302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [114.952498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.953010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [114.953534] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [114.954085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [114.955212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [114.956038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [114.956677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [114.956847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [114.956984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [114.957116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [114.957716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.957892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [114.957908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [114.958033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [114.959139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.959255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [114.959956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [114.960465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.960472] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [114.960657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [114.987432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [114.987438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [114.987574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [114.987829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [114.989362] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [114.989505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [114.990891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.015277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.020241] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.020347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.020869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.021084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.021110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.021289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.021825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.022318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.022878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.024005] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.025102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.025604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.025772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.025908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.026041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.026638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.026832] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.026848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.026974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.028073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.028195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.028903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.029417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.029424] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.029611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.053140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.053145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.053264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.053423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.054946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.055106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.056510] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.080806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.084381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.084503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.085009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.085152] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.085171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.085295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.085791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.086288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.086882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.088212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.089301] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.090045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.090264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.090462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.090631] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.091220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.091365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.091381] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.091525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.092606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.092724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.093412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.093913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.093918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.094034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.119229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.119235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.119351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.119541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.121127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.121280] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.122487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.146778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.150372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.150489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.150961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.151104] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.151123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.151246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.151743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.152240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.152842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.154152] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.155210] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.155999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.156217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.156416] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.156586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.157187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.157342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.157358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.157491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.159109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.159256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.159947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.160417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.160423] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.160579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.186911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.186916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.187048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.187192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.188704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.188857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.190183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.213586] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.217609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.217709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.218176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.218321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.218340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.218463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.219027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.219543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.220092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.221229] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.222021] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.222781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.222939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.223078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.223246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.223912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.224112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.224131] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.224263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.225346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.225467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.226160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.226700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.226705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.226822] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.253080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.253085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.253203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.253348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.254881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.255032] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.256394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.280735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.285572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.285703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.286173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.286317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.286336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.286460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.286974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.287465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.288032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.289215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.290304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.291045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.291249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.291448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.291653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.292262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.292410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.292427] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.292571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.293655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.293774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.294442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.294963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.294968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.295084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.320200] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.320205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.320321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.320464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.322015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.322168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.323515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.347821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.351399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.351545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.352025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.352165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.352184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.352304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.352814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.353302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.353884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.355094] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.356208] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.356831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.356990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.357130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.357266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.357926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.358135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.358158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.358306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.359388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.359520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.360205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.360740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.360745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.360861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.387123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.387141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.387257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.387401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.388442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.388634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.390041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.414427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.418080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.418180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.418661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.418845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.418864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.418988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.419456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.419986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.420579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.421773] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.422836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.423596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.423754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.423894] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.424060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.424726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.424926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.424942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.425076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.426157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.426276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.426964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.427450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.427455] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.427582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.455444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.455450] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.455605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.455845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.456931] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.457072] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.458415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.482712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.488109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.488235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.488764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.488981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.489007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.489169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.489675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.490158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.490732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.491840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.492940] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.493678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.493836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.493976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.494110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.494724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.494868] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.494884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.495012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.496088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.496241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.497018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.497539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.497547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.497666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.524422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.524427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.524578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.524847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.526398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.526552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.527976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.552335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.556511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.556660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.557159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.557363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.557389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.557565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.558084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.558623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.559159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.560274] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.561103] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.561882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.562041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.562181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.562318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.562932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.563077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.563093] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.563222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.564293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.564445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.565230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.565764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.565772] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.565904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.591056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.591061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.591178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.591322] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.592833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.592986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.594399] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.618737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.624073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.624194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.624717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.624935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.624961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.625125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.625658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.626142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.626715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.627840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.628939] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.629676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.629834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.629974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.630109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.630760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.630915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.630931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.631054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.632159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.632320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.633121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.633669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.633676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.633885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.660126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.660131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.660248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.660391] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.661920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.662074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.663514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.687812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.691417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.691563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.692043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.692198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.692219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.692355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.692866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.693352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.693936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.695146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.696090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.696877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.697036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.697209] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.697402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.698067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.698242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.698261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.698396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.699516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.699635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.700313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.700855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.700861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.700977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.728277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.728282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.728398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.728602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.730212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.730354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.731504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.755813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.760561] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.760688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.761158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.761302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.761321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.761444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.761986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.762497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.763054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.764338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.765431] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.766189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.766361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.766577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.766770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.767384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.767549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.767565] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.767694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.768776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.768897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.769597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.770099] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.770104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.770247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.797100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.797105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.797221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.797365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.798909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.799069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.800465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.824746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.830079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.830192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.830720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.830941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.830967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.831147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.831678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.832169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.832732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.833974] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.835076] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.835730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.835890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.836030] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.836166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.836769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.836914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.836930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.837055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.838156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.838275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.838982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.839518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.839526] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.839697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.867062] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.867067] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.867184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.867328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.868839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.868991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.870393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.894739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.899601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.899734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.900249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.900450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.900508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.900706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.901209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.901734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.902285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.903398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.904514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.905277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.905435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.905603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.905771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.906366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.906518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.906557] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.906694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.907798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.908390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.909133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.909689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.909710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.909857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [115.936102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.936108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [115.936225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.936368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [115.937896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [115.938050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [115.939420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [115.963716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [115.969100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [115.969219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.969775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.969997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [115.970023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [115.970186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.970696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [115.971175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [115.971748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [115.972840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [115.973940] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [115.974678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [115.974847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [115.974982] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [115.975114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [115.975739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [115.975895] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [115.975910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [115.976032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [115.977175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.977750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [115.978528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [115.979046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [115.979053] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [115.979178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.005418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.005423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.005601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.005839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.007382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.007505] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.008877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.033180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.038176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.038320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.038878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.039094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.039120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.039293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.039819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.040310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.040882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.042045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.043149] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.043880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.044038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.044177] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.044313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.044925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.045071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.045087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.045214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.046285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.046403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.047170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.047706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.047713] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.047884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.074145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.074150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.074266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.074410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.075494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.075655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.077080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.101506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.106139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.106265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.106767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.106945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.106970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.107156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.107686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.108182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.108745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.109840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.110790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.111465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.111689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.111825] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.111985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.112585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.112764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.112780] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.112904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.114507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.114639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.115295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.115877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.115884] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.116063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.142887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.142905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.143022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.143165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.144698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.144849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.146150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.170533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.174094] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.174198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.174680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.174863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.174882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.175007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.175504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.176000] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.176602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.177808] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.178839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.179600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.179767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.179904] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.180051] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.180713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.180952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.180975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.181123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.182224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.182345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.183066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.183566] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.183571] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.183688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.210996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.211003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.211137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.211283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.212816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.212979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.214386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.237701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.243046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.243161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.243667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.243873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.243899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.244079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.244598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.245096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.245658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.246813] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.247840] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.248644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.248803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.248944] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.249079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.249680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.249826] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.249842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.249968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.251070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.251191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.251908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.252425] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.252433] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.252625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.279440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.279445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.279596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.279836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.281371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.281508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.282900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.307255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.311436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.311566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.312101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.312296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.312322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.312535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.313053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.313578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.314128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.315239] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.316045] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.316849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.317010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.317149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.317284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.317889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.318035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.318051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.318177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.319259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.319398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.320167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.320683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.320691] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.320810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.349207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.349213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.349329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.349473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.350993] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.351146] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.352515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.376806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.382204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.382325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.382827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.383071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.383098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.383263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.383775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.384252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.384824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.385986] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.386775] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.387407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.387582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.387722] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.387857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.388445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.388605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.388621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.388747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.389837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.389959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.390660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.391174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.391181] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.391351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.416016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.416021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.416138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.416283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.417814] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.417973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.419398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.442312] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.446509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.446643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.447158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.447365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.447391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.447570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.448086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.448611] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.449162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.450274] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.451391] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.452155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.452314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.452454] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.452603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.453202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.453347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.453363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.453505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.454596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.454727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.455509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.456023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.456030] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.456184] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.483468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.483473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.483610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.483859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.485393] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.485539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.486922] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.511309] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.514935] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.515045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.515530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.515678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.515701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.515882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.516418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.516925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.517509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.518751] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.519836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.520624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.520835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.520982] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.521118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.521722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.521870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.521886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.522011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.523093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.523211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.523900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.524412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.524417] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.524594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.550309] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.550314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.550431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.550660] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.552238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.552382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.554514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.578906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.584107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.584234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.584738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.584977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.585002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.585178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.585685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.586169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.586742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.587840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.588948] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.589765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.589926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.590066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.590203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.590854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.591011] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.591027] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.591150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.592210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.592374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.593112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.593678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.593685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.593825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.618933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.618939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.619069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.619214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.620747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.620908] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.622150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.646512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.650697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.650824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.651292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.651433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.651452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.651623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.652107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.652647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.653191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.654382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.655347] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.656111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.656268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.656407] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.656568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.657223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.657427] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.657450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.657636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.658798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.658917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.660356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.660904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.660909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.661026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.688893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.688899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.689029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.689172] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.690683] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.690835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.692150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.716517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.720668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.720798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.721264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.721405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.721424] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.721594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.722078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.722618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.723161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.724328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.725417] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.726188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.726346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.726548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.726772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.727414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.727577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.727617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.727754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.728881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.728997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.729642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.730090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.730095] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.730208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.757011] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.757017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.757134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.757278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.758788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.758940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.760339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.784690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.790066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.790186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.790690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.790932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.790958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.791128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.791634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.792118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.792692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.793934] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.795018] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.795783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.795942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.796083] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.796218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.796831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.796976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.796992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.797118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.798196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.798321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.799100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.799640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.799648] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.799804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.826549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.826555] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.826671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.826815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.828332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.828529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.829910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.854293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.857950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.858059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.858540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.858721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.858740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.858912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.859441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.859974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.860583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.861714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.862806] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.863522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.863748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.863924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.864061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.864663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.864810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.864826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.864954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.866034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.866153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.866840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.867362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.867369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.867553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.893838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.893843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.893975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.894119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.895652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.895805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.897151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.921530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.926134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.926264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.926760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.926935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.926954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.927127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.927715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.928211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.928800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.929919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.931007] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.931778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.932001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [116.932187] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [116.932330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [116.932930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.933076] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [116.933091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [116.933218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.934263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.934384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.935085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [116.935607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.935613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.935777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [116.963114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [116.963119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [116.963235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.963379] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [116.964421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [116.964600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [116.966019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [116.990369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [116.994446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [116.994556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.995026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.995169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [116.995188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [116.995312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.995794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [116.996295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [116.996893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [116.998153] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [116.999207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [116.999837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [116.999996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.000136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.000273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.000924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.001128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.001150] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.001331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.002528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.002660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.003345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.003871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.003876] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.004020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.031351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.031356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.031473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.031707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.033294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.033431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.035850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.060185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.065458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.065649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.066128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.066268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.066287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.066409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.066987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.067493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.068050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.069308] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.070374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.071131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.071350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.071564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.071733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.072335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.072499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.072515] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.072642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.073735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.073856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.074556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.075046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.075051] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.075167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.100910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.100927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.101045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.101188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.102699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.102861] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.104149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.128528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.132648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.132752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.133223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.133366] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.133385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.133557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.134126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.134674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.135211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.136331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.137420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.138202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.138415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.138574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.138710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.139298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.139444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.139460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.139602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.140684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.140803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.141494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.141999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.142006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.142178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.167342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.167347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.167465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.167669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.169263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.169400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.170504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.194804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.198376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.198498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.198968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.199111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.199131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.199255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.199755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.200244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.200845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.202040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.203136] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.203879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.204037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.204178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.204368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.205033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.205210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.205231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.205360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.206454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.206587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.207254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.207806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.207812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.207931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.235834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.235839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.235956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.236099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.237647] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.237841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.239177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.263532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.267620] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.267723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.268194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.268339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.268357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.268558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.269101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.269650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.270185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.271328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.272420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.273195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.273416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.273583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.273719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.274307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.274451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.274467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.274609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.275682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.275801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.276504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.277006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.277014] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.277190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.305138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.305143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.305260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.305403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.306930] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.307082] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.308509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.332778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.336826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.336947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.337417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.337576] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.337621] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.337800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.338330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.338856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.339415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.340676] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.341764] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.342525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.342748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.342896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.343032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.343636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.343783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.343799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.343925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.345025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.345147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.345851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.346342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.346347] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.346523] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.374438] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.374443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.374575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.374833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.376469] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.376524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.377530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.401928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.405987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.406107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.406629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.406800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.406820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.406987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.407543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.408046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.408647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.409806] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.410837] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.411596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.411771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.411965] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.412153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.412813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.412972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.412988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.413111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.414217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.414349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.414685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.415134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.415139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.415252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.440410] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.440415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.440579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.440834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.442381] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.442530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.443915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.468301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.472468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.472586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.473059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.473253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.473278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.473460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.474011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.474532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.475056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.476191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.477223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.478027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.478187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.478326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.478462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.479064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.479211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.479226] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.479354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.480449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.480580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.481278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.481817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.481825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.481995] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.506646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.506651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.506769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.506913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.508428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.508603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.510052] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.534409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.538562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.538673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.539140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.539281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.539300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.539421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.539932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.540419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.541003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.542195] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.543284] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.544050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.544227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.544432] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.544639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.545246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.545391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.545407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.545550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.546629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.546750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.547436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.547944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.547949] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.548091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.576018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.576023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.576140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.576284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.577837] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.577987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.579413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.603755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.608620] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.608756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.609223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.609367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.609386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.609538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.610107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.610627] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.611189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.612308] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.613374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.614154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.614364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.614522] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.614659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.615246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.615391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.615407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.615545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.616618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.616737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.617425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.617938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.617945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.618118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.646056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.646061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.646177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.646323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.647877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.648038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.649410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.673751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.678613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.678749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.679221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.679366] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.679385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.679537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.680099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.680622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.681184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.682301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.683373] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.684157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.684350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.684504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.684639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.685228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.685373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.685389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.685531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.686602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.686720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.687406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.687915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.687923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.688093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.713882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.713887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.714004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.714147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.715698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.715854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.717177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.741556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.745718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.745850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.746316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.746524] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.746581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.746765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.747296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.747832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.748365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.749512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.750510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.751182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.751347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.751503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.751677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.752261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.752403] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.752418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.752556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.753712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.753832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.754794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.755839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.755845] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.756012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.783364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.783369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.783520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.783760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.785465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.785523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.786547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.810900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.814492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.814601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.815075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.815241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.815267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.815451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.816006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.816535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.817085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.818327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.819420] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.820209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.820398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.820554] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.820690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.821279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.821424] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.821440] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.821584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.822667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.822786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.823474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.823987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.823994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.824172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.850413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.850418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.850554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.850825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.852384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.852523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.853952] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.878285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.881891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.882000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.882469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.882678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.882718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.882928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.883454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.883989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.884553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.885709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.886802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.887461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.887636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.887776] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.887912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.888511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.888656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.888672] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.888798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.889889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.890008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.890705] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.891221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.891228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.891402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.918842] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.918847] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.918964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.919109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.920620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.920771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.922151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [117.946543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [117.950636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [117.950765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.951232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.951388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [117.951414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [117.951683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.952250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [117.952773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [117.953334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [117.954667] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [117.955838] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [117.956653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [117.956838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [117.956979] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [117.957113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [117.957716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.957862] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [117.957878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [117.958006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [117.959049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.959170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [117.959860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [117.960364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.960371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [117.960556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [117.986841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [117.986847] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [117.986979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [117.987124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [117.988655] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [117.988814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [117.990151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.014522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.019175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.019279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.019763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.019943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.019962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.020134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.020698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.021200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.021789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.022921] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.024005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.024780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.024988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.025133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.025268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.025886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.026066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.026081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.026203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.027291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.027413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.028107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.028640] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.028647] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.028817] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.055124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.055129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.055246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.055390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.056922] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.057074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.058445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.082743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.088110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.088250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.088787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.089002] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.089028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.089199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.089707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.090189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.090763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.091916] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.093017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.093784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.093967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.094107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.094242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.094859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.095006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.095024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.095150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.096219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.096626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.097384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.097896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.097901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.098030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.124805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.124810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.124946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.125091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.126635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.126799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.128178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.152558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.156627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.156732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.157202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.157346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.157364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.157506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.158007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.158533] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.159091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.160267] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.161077] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.161675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.161834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.161974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.162108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.162721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.162921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.162944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.163127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.164240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.164360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.165065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.165591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.165597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.165713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.190866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.190872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.191001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.191145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.192699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.192851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.194150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.218523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.222637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.222741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.223211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.223356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.223375] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.223515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.224021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.224546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.225104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.226303] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.227375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.228135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.228295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.228435] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.228595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.229228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.229435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.229459] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.229648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.230748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.230868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.231565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.232056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.232061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.232180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.260052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.260058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.260174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.260318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.261872] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.262023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.263396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.287753] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.292594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.292727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.293236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.293433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.293459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.293720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.294237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.294763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.295313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.296441] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.297517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.298280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.298440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.298597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.298732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.299331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.299489] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.299505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.299634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.300726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.300888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.301654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.302145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.302151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.302274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.330174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.330179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.330296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.330441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.331978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.332130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.333461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.357758] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.363103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.363218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.363748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.363965] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.363992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.364164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.364671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.365155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.365728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.366840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.367943] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.368677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.368838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.368977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.369113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.369729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.369875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.369891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.370020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.371102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.371226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.371972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.372494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.372502] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.372672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.400051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.400056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.400174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.400318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.401359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.401537] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.402953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.427289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.433338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.433448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.433976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.434194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.434220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.434395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.434913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.435419] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.435995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.437111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.438215] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.438979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.439138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.439277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.439413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.440025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.440172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.440187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.440313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.441392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.441524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.442279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.442818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.442825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.442998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.468098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.468103] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.468221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.468364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.469875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.470035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.471406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.495739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.500506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.500612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.501091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.501285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.501311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.501510] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.502047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.502583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.503120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.504212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.505173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.505957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.506139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.506305] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.506441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.507058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.507200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.507215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.507341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.508425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.508569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.509276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.510310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.510317] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.510502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.537307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.537312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.537430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.537641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.539205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.539356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.540542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.564847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.570260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.570389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.570964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.571171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.571197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.571372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.571922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.572391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.572967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.574093] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.575226] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.575866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.576026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.576166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.576302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.576915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.577087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.577103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.577225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.578304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.578420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.578779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.579286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.579293] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.579459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.606897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.606902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.607019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.607162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.608692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.608852] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.610150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.634505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.638595] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.638706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.639172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.639312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.639331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.639452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.639961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.640450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.641034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.642215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.643304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.644045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.644204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.644342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.644489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.645132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.645343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.645365] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.645546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.646643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.646763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.647450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.647956] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.647961] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.648076] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.675356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.675361] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.675491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.675749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.676815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.676958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.678328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.702713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.708178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.708302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.708805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.709044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.709070] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.709250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.709750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.710238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.710810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.711971] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.713074] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.713860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.714019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.714159] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.714293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.714892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.715039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.715055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.715183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.716264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.716383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.717144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.717680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.717687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.717835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.743504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.743509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.743626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.743769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.744802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.744961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.746415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.770727] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.775582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.775692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.776168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.776365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.776392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.776596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.777107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.777642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.778180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.779419] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.780520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.781163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.781322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.781462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.781613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.782200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.782345] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.782360] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.782500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.783593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.783711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.784409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.784940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.784948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.785119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.812483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.812489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.812634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.812778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.814281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.814430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.815910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.840289] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.846361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.846499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.847061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.847254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.847274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.847406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.847920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.848422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.849009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.850178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.850845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.851620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.851788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.851923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.852055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.852681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.852866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.852882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.853008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.854061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.854221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.854974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.855491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.855498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.855687] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.881411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.881416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.881595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.881836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.883384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.883549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.884934] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.909293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.914809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.914936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.915403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.915592] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.915612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.915751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.916219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.916748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.917296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.918433] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.919405] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.920077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.920238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.920377] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.920539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.921123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.921265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.921280] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.921402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.922524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.923139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.923930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.924429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.924435] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.924594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [118.950328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.950333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [118.950451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.950681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [118.952271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [118.952433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [118.954863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [118.979246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [118.984827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [118.984950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.985418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.985625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [118.985666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [118.985847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.986373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [118.986881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [118.987442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [118.988709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [118.989809] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [118.990311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [118.990493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [118.990659] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [118.990805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [118.991389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [118.991559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [118.991588] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [118.991711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [118.993291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.993410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [118.994090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [118.994655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [118.994662] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [118.994846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.020040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.020045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.020162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.020305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.021816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.021978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.023377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.047752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.053095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.053231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.053734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.053976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.054002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.054182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.054715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.055211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.055772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.056925] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.058003] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.058651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.058810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.058949] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.059084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.059686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.059831] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.059847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.059974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.060657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.060778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.061466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.061969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.061975] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.062132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.089468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.089473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.089649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.089915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.090984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.091125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.092535] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.116837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.122102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.122217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.122719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.122962] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.122987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.123165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.123667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.124154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.124727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.125841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.126942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.127677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.127835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.127975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.128110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.128723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.128868] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.128884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.129012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.130082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.130251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.130639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.131148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.131154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.131278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.158567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.158572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.158720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.158865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.160381] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.160574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.162012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.186392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.189984] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.190083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.190564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.190748] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.190767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.190891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.191357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.191888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.192443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.193758] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.194837] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.195596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.195772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.195974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.196166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.196795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.196942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.196958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.197084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.198165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.198286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.198985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.199467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.199473] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.199608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.228108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.228113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.228231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.228374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.229902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.230053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.231456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.255760] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.260507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.260616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.261098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.261303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.261330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.261538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.262044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.262574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.263114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.264356] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.265458] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.266124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.266283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.266423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.266573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.267161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.267306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.267321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.267447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.268543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.268662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.269353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.269889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.269896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.270067] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.296899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.296904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.297035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.297179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.298690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.298849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.300180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.324562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.328682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.328786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.329254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.329393] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.329412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.329616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.330145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.330673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.331258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.332358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.333447] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.334238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.334462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.334670] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.334815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.335415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.335572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.335588] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.335716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.336807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.336929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.337632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.338134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.338139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.338256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.365060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.365065] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.365181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.365326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.366876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.367028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.368416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.392686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.398083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.398203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.398731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.398953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.398978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.399153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.399686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.400170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.400743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.401840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.402949] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.403733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.403895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.404034] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.404171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.404772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.404917] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.404934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.405059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.406139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.406273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.406982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.407520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.407528] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.407675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.433370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.433376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.433528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.433773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.435320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.435457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.436866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.461295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.464941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.465052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.465538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.465686] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.465708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.465888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.466422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.466934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.467522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.468768] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.469837] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.470596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.470789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.470986] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.471179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.471805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.471953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.471968] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.472094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.473170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.473289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.473976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.474511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.474516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.474633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.500323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.500329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.500445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.500677] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.501764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.501918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.503321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.527705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.533154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.533281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.533790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.534024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.534050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.534228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.534716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.535218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.535790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.536939] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.538016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.538779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.538939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.539078] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.539212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.539821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.539967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.539983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.540111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.541192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.541313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.542063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.542597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.542604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.542750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.568444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.568452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.568654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.568926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.570487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.570659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.572007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.596378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.599888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.599987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.600455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.600633] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.600653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.600790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.601257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.601783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.602342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.603513] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.604509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.605266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.605438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.605612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.605808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.606443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.606681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.606704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.606872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.608457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.608613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.609315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.609846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.609852] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.609981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.637345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.637351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.637470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.637670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.639247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.639390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.641862] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.666245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.669885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.669997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.670470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.670632] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.670652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.670810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.671343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.671855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.672427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.673679] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.674767] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.675525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.675730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.675877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.676013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.676615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.676761] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.676777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.676905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.678007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.678126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.678826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.679335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.679342] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.679528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.707435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.707440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.707594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.707840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.709390] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.709525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.710916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.735291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.741346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.741455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.741988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.742196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.742222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.742404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.742900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.743414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.743975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.745211] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.746319] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.747084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.747242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.747382] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.747535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.748134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.748279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.748295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.748420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.749515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.749669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.750428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.750944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.750951] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.751072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.778989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.778994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.779110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.779255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.780766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.780927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.782328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.806712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.812165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.812292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.812793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.813033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.813058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.813235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.813739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.814231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.814802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.815948] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.817022] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.817791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.817949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.818089] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.818223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.818833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.818979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.818995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.819120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.820189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.820308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.821074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.821615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.821622] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.821765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.849101] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.849106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.849223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.849366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.850877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.851038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.852412] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.876730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.882602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.882739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.883207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.883347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.883366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.883550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.884096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.884616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.885178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.886297] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.887374] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.888156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.888381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.888545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.888681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.889268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.889415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.889431] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.889571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.890623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.890742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.891431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.891937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.891944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.892116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.918999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.919004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.919121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.919264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.920792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.920944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.922376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [119.946648] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [119.950190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [119.950298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.950785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.950933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [119.950954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [119.951084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.951569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [119.952071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [119.952651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [119.953950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [119.955039] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [119.955807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [119.956028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [119.956224] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [119.956392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [119.956995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.957141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [119.957159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [119.957286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [119.958356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.958474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [119.959179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [119.959715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.959722] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [119.959895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [119.986691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [119.986696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [119.986840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [119.986984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [119.988523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [119.988684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [119.990084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.014411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.018566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.018676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.019143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.019282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.019301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.019422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.019933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.020421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.021004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.022212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.023303] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.024049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.024208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.024384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.024595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.025248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.025400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.025416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.025556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.026650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.026770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.027452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.027963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.027968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.028087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.055429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.055435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.055615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.055856] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.057416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.057581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.058967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.083345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.087540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.087649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.088124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.088324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.088350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.088568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.089092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.089640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.090165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.091278] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.092209] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.093009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.093169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.093310] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.093446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.094048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.094193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.094209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.094337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.095423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.095554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.096257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.096797] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.096805] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.096978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.124346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.124351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.124469] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.124674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.126265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.126415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.128513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.152782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.156403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.156549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.157042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.157195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.157214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.157335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.157828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.158340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.158923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.160141] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.161207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.161834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.161992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.162132] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.162306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.163004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.163221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.163242] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.163391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.164620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.164737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.166162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.166730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.166755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.166884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.192614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.192620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.192737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.192881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.194371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.194544] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.195987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.220319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.226366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.226473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.227038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.227242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.227267] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.227445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.227964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.228465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.229042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.230184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.231231] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.231883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.232042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.232183] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.232318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.232932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.233139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.233155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.233281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.234361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.234505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.235275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.235823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.235830] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.235982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.262813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.262818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.262934] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.263078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.264589] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.264747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.266176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.290555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.294102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.294210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.294697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.294845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.294864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.294992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.295463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.295978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.296557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.297841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.298929] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.299676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.299862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.300064] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.300256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.300873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.301019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.301036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.301164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.302244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.302363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.303065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.303603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.303608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.303757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.331730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.331736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.331852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.331997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.333535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.333705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.335136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.359556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.363097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.363199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.363682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.363865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.363883] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.364008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.364505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.364999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.365578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.366779] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.367840] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.368600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.368757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.368931] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.369128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.369796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.369947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.369963] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.370092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.371175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.371294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.371975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.372456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.372461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.372592] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.401036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.401041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.401158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.401303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.402835] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.402986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.404388] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.428731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.433442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.433564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.434062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.434265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.434289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.434467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.434986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.435473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.436049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.437192] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.438226] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.439016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.439176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.439315] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.439450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.440065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.440211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.440228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.440353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.441441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.441587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.442350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.442879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.442887] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.443056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.467642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.467648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.467777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.467922] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.469438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.469613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.471064] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.495440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.499044] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.499147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.499634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.499783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.499802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.499931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.500392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.500918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.501499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.502803] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.503837] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.504597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.504821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.505023] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.505216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.505830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.505980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.505996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.506125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.507207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.507326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.508014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.508509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.508514] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.508631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.537006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.537011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.537127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.537271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.538804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.538954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.540356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.564712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.570088] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.570238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.570811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.571018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.571038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.571169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.571653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.572153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.572767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.573929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.574742] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.575384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.575569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.575705] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.575837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.576422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.576601] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.576617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.576746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.577840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.577960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.578691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.579203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.579211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.579376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.605065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.605070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.605187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.605332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.606865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.607016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.608392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.632732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.638577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.638719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.639186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.639327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.639345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.639466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.640001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.640503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.641059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.642241] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.643330] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.644090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.644247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.644387] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.644537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.645185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.645398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.645422] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.645595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.646695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.646813] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.647510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.648010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.648015] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.648131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.674906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.674912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.675041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.675184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.676718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.676870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.678177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.702534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.707111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.707216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.707704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.707888] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.707907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.708077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.708617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.709150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.709739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.710842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.711934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.712691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.712914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.713084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.713222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.713825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.713972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.713988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.714113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.715183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.715302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.715992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.716491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.716498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.716670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.741901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.741907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.742024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.742167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.743679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.743829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.745150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.768646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.772708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.772841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.773305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.773461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.773492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.773697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.774226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.774773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.775307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.776512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.777510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.778283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.778524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.778701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.778842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.779430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.779589] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.779605] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.779732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.780815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.780935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.781626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.782132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.782139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.782309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.810227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.810232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.810349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.810553] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.812139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.812288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.813486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.837790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.841347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.841455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.841982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.842139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.842158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.842284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.842778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.843274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.843876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.845070] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.846172] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.846881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.847040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.847181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.847375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.848037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.848222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.848238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.848372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.849460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.849596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.850260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.850813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.850819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.850934] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.878314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.878320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.878436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.878666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.880269] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.880414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.881539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.905840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.909417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.909538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.910014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.910163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.910183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.910310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.910799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.911298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.911866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.913191] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.914210] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.914970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.915128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.915328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.915539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.916188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.916358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.916374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.916520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.917611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.917733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.918419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.918924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.918929] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.919046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [120.945861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.945866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [120.945983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.946127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [120.947674] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [120.947849] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [120.949151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [120.972721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [120.978095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [120.978244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.978802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.979019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [120.979044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [120.979224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.979728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [120.980214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [120.980786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [120.981937] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [120.983023] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [120.983796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [120.983956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [120.984095] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [120.984232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [120.984834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [120.984980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [120.984996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [120.985122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [120.986197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.986335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [120.987100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [120.987632] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [120.987637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [120.987761] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.015677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.015682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.015799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.015942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.017655] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.017685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.019085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.043456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.048100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.048211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.048738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.048930] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.048956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.049141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.049753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.050243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.050845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.051976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.053065] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.053838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.054025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.054222] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.054416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.055038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.055186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.055202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.055330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.056416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.056551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.057245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.057772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.057777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.057896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.083637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.083643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.083759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.083902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.085418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.085595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.087041] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.111400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.115528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.115638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.116103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.116243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.116261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.116385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.116899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.117390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.117974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.119199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.119992] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.120765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.120924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.121063] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.121198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.121829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.122047] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.122069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.122251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.123922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.124056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.125249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.125822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.125827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.125941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.152145] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.152150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.152266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.152409] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.154100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.154130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.155488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.179755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.185109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.185255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.185760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.186001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.186027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.186208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.186716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.187201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.187772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.188926] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.190017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.190781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.190940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.191079] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.191214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.191863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.192048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.192064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.192186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.193831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.194009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.195259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.195871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.195878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.196006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.222216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.222222] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.222339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.222497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.224113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.224263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.225520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.249807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.253379] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.253499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.254006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.254149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.254168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.254294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.254790] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.255288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.255896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.257095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.258194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.258883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.259041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.259182] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.259375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.260043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.260228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.260244] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.260379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.261492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.261611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.262288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.262835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.262841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.262957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.288109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.288115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.288232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.288377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.289418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.289583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.290987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.315343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.318969] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.319078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.319562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.319772] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.319796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.319976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.320541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.321049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.321640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.322842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.323931] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.324697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.324879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.325019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.325155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.325761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.325908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.325924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.326050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.327120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.327238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.327933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.328420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.328427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.328613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.354897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.354903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.355035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.355179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.356711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.356862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.358178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.382533] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.386658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.386762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.387233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.387377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.387396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.387537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.388044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.388585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.389129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.390338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.391433] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.392193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.392352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.392506] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.392642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.393283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.393507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.393531] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.393703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.394796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.394916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.395615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.396112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.396118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.396234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.422418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.422423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.422573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.422840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.423925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.424039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.425382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.449715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.455110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.455235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.455758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.455975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.456000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.456184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.456726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.457218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.457780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.458933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.460010] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.460666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.460864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.461000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.461133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.461731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.461873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.461889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.462013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.463116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.463232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.464457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.465004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.465011] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.465180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.490365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.490370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.490520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.490761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.491844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.491960] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.493335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.517682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.521716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.521838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.522306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.522449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.522468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.522661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.523203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.523722] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.524284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.525401] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.526502] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.527132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.527360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.527574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.527743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.528347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.528510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.528526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.528652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.529744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.529862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.530560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.531048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.531053] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.531168] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.558511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.558516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.558647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.558791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.559814] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.559973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.561393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.585762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.590514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.590625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.591111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.591318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.591344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.591549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.592056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.592588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.593125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.594214] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.595303] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.596088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.596248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.596388] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.596542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.597130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.597276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.597292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.597421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.598526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.598645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.599325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.599859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.599866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.600044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.627971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.627976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.628106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.628250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.629760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.629911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.631153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.655531] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.659110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.659214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.659701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.659849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.659868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.659998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.660470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.660985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.661564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.662841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.663932] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.664676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.664850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.665048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.665240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.665883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.666030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.666046] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.666172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.667244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.667363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.668065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.668602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.668608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.668728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.694516] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.694522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.694639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.694783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.695821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.695971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.697404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.721754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.727057] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.727177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.727706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.727923] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.727948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.728129] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.728639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.729122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.729694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.730841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.731794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.732516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.732680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.732820] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.732955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.733569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.733715] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.733730] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.733856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.734960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.735079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.736055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.736597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.736604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.736775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.763016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.763021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.763138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.763283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.764814] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.764967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.766397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.790730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.795511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.795621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.796106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.796312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.796339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.796547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.797052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.797584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.798122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.799365] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.800474] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.801145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.801304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.801443] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.801596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.802186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.802331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.802348] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.802492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.803587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.803706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.804407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.804938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.804945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.805115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.830322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.830328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.830444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.830677] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.832259] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.832414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.834542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.858843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.863677] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.863794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.864262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.864406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.864426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.864602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.865145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.865665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.866222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.867352] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.868442] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.869052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.869210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.869349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.869495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.870097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.870306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.870329] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.870526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.871674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.871794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.872497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.872995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.873000] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.873115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.898772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.898777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.898907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.899050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.900591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.900741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.902151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.926541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [121.931169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [121.931269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.931764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.931969] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [121.931995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [121.932178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.932767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [121.933261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [121.933843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [121.934970] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [121.936061] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [121.936842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [121.937037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [121.937176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [121.937313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [121.937914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.938059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [121.938076] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [121.938201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [121.939272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.939390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [121.940093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [121.940630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.940637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [121.940807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [121.968171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [121.968177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [121.968292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [121.968455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [121.970008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [121.970159] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [121.971487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [121.995775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.000527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.000639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.001133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.001346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.001371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.001572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.002067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.002593] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.003142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.004380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.005162] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.005887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.006045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.006185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.006321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.006925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.007071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.007087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.007216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.008288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.008443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.009226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.009768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.009775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.009921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.035020] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.035025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.035142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.035286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.036817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.036969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.038414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.062746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.067590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.067724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.068246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.068448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.068473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.068731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.069251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.069791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.070326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.071511] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.072514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.073277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.073437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.073591] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.073727] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.074327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.074472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.074503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.074632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.075723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.075895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.076661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.077177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.077184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.077319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.103047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.103053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.103170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.103315] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.104847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.105006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.106381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.130726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.135514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.135655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.136131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.136278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.136297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.136425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.136928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.137436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.138006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.139217] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.140305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.141060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.141290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.141504] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.141670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.142277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.142423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.142439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.142584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.143677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.143797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.144503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.144973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.144979] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.145094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.170775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.170781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.170925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.171069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.172580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.172733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.174140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.198516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.202600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.202713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.203177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.203317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.203336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.203459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.203971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.204458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.205041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.206419] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.207513] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.208272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.208431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.208618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.208812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.209464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.209634] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.209650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.209776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.210878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.210997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.211680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.212179] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.212184] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.212300] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.237970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.237976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.238095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.238243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.239756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.239907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.241335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.265676] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.269191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.269302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.269789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.269937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.269957] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.270084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.270568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.271072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.271652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.272822] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.273915] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.274677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.274837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.274976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.275154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.275817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.276020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.276036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.276169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.277249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.277367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.278058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.278596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.278601] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.278720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.303899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.303905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.304021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.304164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.305741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.305893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.307296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.331684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.337113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.337256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.337778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.337997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.338023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.338208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.338730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.339204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.339776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.340841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.341944] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.342717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.342877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.343016] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.343152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.343765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.343911] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.343927] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.344053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.345135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.345275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.345664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.346176] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.346183] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.346329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.374803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.374809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.374926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.375071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.376580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.376731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.378118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.402522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.406658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.406760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.407229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.407374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.407392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.407536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.408057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.408583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.409126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.410316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.411375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.412133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.412294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.412509] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.412701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.413339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.413510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.413526] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.413652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.414743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.414862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.415561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.416052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.416057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.416173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.442411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.442417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.442569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.442807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.444446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.444469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.445896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.470280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.474461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.474593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.475129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.475330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.475355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.475597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.476076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.476602] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.477152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.478383] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.479163] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.479882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.480041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.480181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.480317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.480943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.481085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.481100] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.481223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.482330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.482467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.483258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.483798] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.483805] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.483978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.511286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.511291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.511408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.511611] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.513199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.513350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.514538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.538841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.543729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.543858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.544328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.544473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.544511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.544729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.545255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.545802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.546336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.547512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.548509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.549285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.549523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.549716] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.549865] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.550465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.550627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.550643] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.550769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.551853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.551974] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.552673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.553161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.553166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.553282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.578457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.578462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.578645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.578884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.579970] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.580124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.581551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.605775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.610509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.610611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.611090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.611242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.611262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.611397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.611927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.612447] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.613011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.614217] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.615013] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.615767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.615937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.616074] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.616205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.616865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.617056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.617072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.617198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.618867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.618983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.619627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.620185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.620190] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.620302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<6> [122.641548] [IGT] i915_pm_rpm: finished subtest basic-rte, FAIL
<7> [122.641572] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]
<7> [122.645453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.645459] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.645602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.645788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.646805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.648150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.672508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.677263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.677399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.677546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.677984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.678604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.678789] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.678949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.679577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.679727] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.680824] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]
<7> [122.682088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.705657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.710489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.710673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.710852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.711338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.711883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.712037] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.712187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.712859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.713060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.714138] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]
<7> [122.714248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.716520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.740750] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.745565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.745691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.746181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.746348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.746370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.746523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.747012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.747546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.748100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.749233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.750349] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.751147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.751336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.751495] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.751638] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.752233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.752386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.752411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.755483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.779519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.784851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.784990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.785130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.785585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.786167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.786309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.786488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.787120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.787273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.787782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.790524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.814748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.819977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.820079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.821168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.821306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.822241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.822789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.822794] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.822919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.845912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.845918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.846046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.846207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.847227] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.847355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.848522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.872922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.876545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.876664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.877142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.877293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.877313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.877443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.877932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.878448] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.879010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.880219] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.881323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.881812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.881970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.882110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.882246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.882858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.883035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.883051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.883173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.884202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.884367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.885104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.885662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.885670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.885852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.912168] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.912175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.912345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.912571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.914123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.914241] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.915522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [122.939792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [122.943381] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [122.943502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.944012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.944155] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [122.944174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [122.944300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.944779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [122.945283] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [122.945860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [122.947008] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [122.948091] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [122.948860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [122.949019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [122.949157] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [122.949292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [122.949891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.950035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [122.950050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [122.950176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [122.951254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.951373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [122.952078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [122.952603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.952608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [122.952724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [122.977346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [122.977350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [122.977463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [122.977631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [122.978667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [122.978781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [122.980174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.004573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.008683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.008801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.009294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.009443] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.009462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.009629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.010150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.010673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.011228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.012328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.013418] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.014181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.014340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.014492] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.014628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.015217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.015361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.015377] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.015517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.016598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.016717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.017406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.017907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.017913] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.018031] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.047051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.047056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.047174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.047318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.048351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.048465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.049907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.074307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.077890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.078019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.078494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.078683] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.078702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.078826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.079294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.079819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.080371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.081668] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.082759] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.083510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.083668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.083807] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.083967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.084625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.084834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.084857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.085044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.086181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.086309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.086961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.087472] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.087490] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.087608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.114945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.114950] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.115079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.115222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.116713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.116827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.118147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.142535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.146626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.146753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.147220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.147362] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.147380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.147530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.148082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.148600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.149158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.150378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.151465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.152094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.152254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.152395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.152547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.153136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.153281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.153297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.153423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.154531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.154650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.155330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.155868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.155874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.155990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.180064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.180069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.180197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.180338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.181367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.181507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.182892] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.207292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.210936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.211093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.211661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.211880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.211906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.212088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.212652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.213147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.213736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.214845] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.215967] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.216729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.216889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.217030] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.217166] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.217765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.217910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.217926] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.218052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.219132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.219261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.219987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.220516] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.220524] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.220688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.247474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.247507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.247652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.247799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.249319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.249442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.250864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.275196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.279520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.279617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.280088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.280233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.280251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.280375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.280884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.281373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.281947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.283056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.284146] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.284893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.285051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.285192] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.285327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.285953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.286094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.286109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.286232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.287290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.287408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.288089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.288654] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.288659] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.288789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.313367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.313371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.313492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.313683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.314705] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.314817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.316146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.340535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.344126] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.344230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.344711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.344894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.344913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.345037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.345540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.346020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.346608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.347843] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.348931] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.349675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.349833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.349972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.350107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.350710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.350855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.350870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.350999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.352070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.352192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.352885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.353387] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.353392] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.353515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.377055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.377059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.377172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.377313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.378342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.378453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.379877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.404262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.408920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.409049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.409523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.409699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.409719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.409845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.410312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.410835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.411389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.412677] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.413767] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.414511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.414668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.414807] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.414942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.415539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.415684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.415699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.415827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.416908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.417026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.417728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.418227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.418232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.418348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.445148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.445152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.445266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.445408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.446412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.446546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.447930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.472316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.475821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.475924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.476397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.476550] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.476569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.476693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.477158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.477687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.478239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.479357] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.480327] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.481093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.481251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.481390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.481550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.482135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.482276] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.482291] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.482414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.483499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.483646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.484335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.484857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.484862] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.484975] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.511744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.511748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.511876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.512018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.513014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.513128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.514490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.538789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.542368] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.542494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.542970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.543122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.543141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.543276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.543762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.544268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.544837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.545965] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.547054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.547817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.547977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.548116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.548252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.548848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.548992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.549008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.549133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.550203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.550322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.551038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.551542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.551547] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.551666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.578426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.578431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.578552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.578712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.579705] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.579822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.581175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.605562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.609174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.609293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.609783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.609934] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.609955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.610087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.610569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.611078] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.611646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.612775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.613839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.614600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.614768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.614903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.615035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.615627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.615768] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.615782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.615905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.617515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.617637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.618324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.618846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.618851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.618967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.645171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.645175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.645288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.645430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.646432] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.646568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.647953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.672338] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.676447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.676611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.677089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.677243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.677263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.677395] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.677883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.678399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.678960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.680096] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.680916] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.681677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.681835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.681974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.682110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.682712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.682858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.682873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.683001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.684079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.684201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.684898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.685400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.685405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.685530] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.712280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.712285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.712493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.712696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.714287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.714407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.717550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.741882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.745937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.746065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.746560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.746733] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.746752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.746878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.747346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.747876] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.748423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.749683] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.750774] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.751510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.751677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.751813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.751944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.752535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.752713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.752728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.752852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.754430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.754552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.755209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.755760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.755765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.755914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.781019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.781023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.781139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.781280] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.782312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.782429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.783523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.807816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.811937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.812070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.812560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.812752] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.812772] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.812907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.813383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.813912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.814461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.815731] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.816822] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.817510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.817669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.817808] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.817943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.818538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.818682] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.818697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.818822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.819923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.820044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.820744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.821236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.821241] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.821356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.845988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.845992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.846106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.846248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.847275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.847388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.848520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.872815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.876475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.876612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.877101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.877249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.877269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.877399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.877917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.878400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.878962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.880097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.880918] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.881680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.881838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.881977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.882112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.882711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.882856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.882872] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.882998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.884072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.884191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.884890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.885395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.885400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.885525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.910095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.910099] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.910213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.910356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.911383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.911523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.912910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [123.937301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [123.941433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [123.941597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.942082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.942230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [123.942250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [123.942382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.942900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [123.943383] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [123.943972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [123.945119] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [123.945913] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [123.946510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [123.946678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [123.946814] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [123.946946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [123.947539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.947680] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [123.947695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [123.947817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [123.949404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.949525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [123.950212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [123.950740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.950745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [123.950889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [123.974927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [123.974931] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [123.975044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [123.975185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [123.976215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [123.976328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [123.977484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.001779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.005842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.005971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.006439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.006606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.006643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.006782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.007246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.007773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.008327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.009515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.010511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.011135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.011293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.011432] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.011589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.012199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.012343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.012359] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.012492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.013583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.013702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.014390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.014893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.014898] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.015014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.039051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.039055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.039168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.039310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.040809] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.040927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.042147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.066528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.070632] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.070774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.071251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.071399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.071419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.071562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.072084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.072607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.073161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.074289] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.075377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.076135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.076293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.076431] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.076588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.077218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.077359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.077374] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.077534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.078654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.078773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.079731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.080225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.080230] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.080343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.107123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.107127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.107242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.107383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.108413] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.108547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.109916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.134350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.138008] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.138151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.138654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.138836] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.138857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.138990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.139463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.139997] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.140550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.141716] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.142811] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.143512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.143671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.143811] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.143945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.144539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.144684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.144699] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.144826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.145926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.146045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.146748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.147239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.147245] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.147361] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.173049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.173054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.173168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.173311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.174860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.175008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.176418] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.200845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.204389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.204498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.204972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.205118] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.205137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.205263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.205747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.206250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.206831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.208074] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.209175] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.209883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.210040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.210179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.210315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.210916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.211062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.211078] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.211204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.212282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.212401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.213099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.213622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.213628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.213744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.239986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.239992] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.240156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.240357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.241923] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.242074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.243490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.267784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.271306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.271408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.271889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.272032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.272051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.272176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.272650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.273158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.273729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.274842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.275934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.276677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.276835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.276973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.277109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.277707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.277851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.277867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.277995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.279073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.279192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.279899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.280382] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.280387] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.280512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.306789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.306793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.306909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.307049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.308537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.308650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.310020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.334417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.338584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.338720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.339195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.339343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.339363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.339522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.340027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.340551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.341105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.342233] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.343327] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.344089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.344248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.344387] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.344535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.345123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.345267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.345283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.345408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.346498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.346617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.347306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.347827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.347832] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.347948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.374717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.374721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.374833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.374976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.376180] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.376200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.377512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.401909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.405974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.406103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.406595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.406767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.406787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.406911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.407379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.407909] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.408456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.409717] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.410807] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.411514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.411675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.411815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.411951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.412547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.412692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.412707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.412833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.413932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.414052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.414747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.415244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.415249] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.415365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.444337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.444344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.444542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.444776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.446525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.446569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.447542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.471931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.477048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.477167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.477674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.477880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.477906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.478085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.478645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.479110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.479683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.480948] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.482017] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.482513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.482673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.482813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.482949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.483554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.483702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.483719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.483845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.484946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.485065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.485768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.486277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.486284] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.486456] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.511656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.511662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.511793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.511937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.513441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.513731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.515151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.538560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.542674] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.542786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.543253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.543394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.543413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.543621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.544086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.544615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.545172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.546367] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.547465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.548235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.548394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.548661] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.548858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.549524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.549732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.549756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.549892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.551008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.551129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.551825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.552304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.552309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.552428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.578138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.578143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.578261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.578405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.579600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.579632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.581035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.605365] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.609566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.609667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.610137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.610281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.610300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.610427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.610913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.611429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.611997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.613231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.614025] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.614810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.614969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.615109] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.615245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.615856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.616027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.616042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.616166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.616870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.617015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.618203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.619280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.619285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.619431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.644091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.644096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.644211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.644353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.645382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.645521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.646942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.671321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.674964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.675074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.675555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.675736] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.675756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.675936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.676464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.676988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.677576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.678705] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.679506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.680126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.680285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.680455] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.680670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.681314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.681515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.681536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.681675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.682803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.682919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.683824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.684360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.684365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.684541] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.709735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.709742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.709877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.710027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.711072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.711234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.712538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.736733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.742116] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.742242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.742770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.742986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.743011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.743194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.743709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.744194] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.744765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.745923] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.747018] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.747783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.747942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.748081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.748217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.748829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.748975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.748991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.749116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.750197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.750328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.751111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.751648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.751655] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.751826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.779183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.779188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.779305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.779448] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.780991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.781142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.782516] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.806808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.811528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.811636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.812112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.812316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.812342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.812559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.813085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.813634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.814158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.815275] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.816207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.817033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.817191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.817331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.817465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.818069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.818215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.818231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.818359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.819443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.819579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.820273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.820796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.820803] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.820979] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.847291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.847297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.847414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.847643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.849266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.849425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.850861] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.875216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.880128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.880271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.880799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.881017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.881042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.881223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.881734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.882241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.882803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.883952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.885053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.885687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.885885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.886021] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.886154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.886782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.886944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.886960] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.887085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.888166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.888284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.888979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.889518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.889525] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.889697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.917083] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.917089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.917209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.917354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.918909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.919061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.920468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [124.944801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [124.950141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [124.950282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.950804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.951022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [124.951047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [124.951229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.951754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [124.952247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [124.952811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [124.953958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [124.955059] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [124.955692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [124.955860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [124.956000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [124.956145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [124.956773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.956934] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [124.956950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [124.957075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [124.958117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.958237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [124.958937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [124.959420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.959427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [124.959611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [124.986431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [124.986436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [124.986594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [124.986780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [124.987811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [124.987950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [124.989326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.013620] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.017204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.017313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.017801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.017982] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.018001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.018126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.018655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.019152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.019760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.020944] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.022006] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.022763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.022922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.023061] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.023198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.023829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.024041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.024063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.024250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.025363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.025502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.026191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.026719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.026725] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.026841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.052521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.052526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.052656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.052799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.054316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.054473] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.055954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.080303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.086354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.086474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.087013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.087215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.087240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.087424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.087971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.088457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.089034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.090142] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.091222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.091995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.092154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.092294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.092429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.093042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.093188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.093204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.093332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.094417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.094553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.095312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.095841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.095849] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.095997] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.121713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.121731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.121847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.121990] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.123527] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.123691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.125101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.149475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.154117] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.154229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.154724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.154899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.154918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.155076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.155664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.156171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.156777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.158008] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.159091] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.159722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.159946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.160137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.160279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.160885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.161031] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.161047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.161176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.162235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.162354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.163071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.163578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.163585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.163755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.189471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.189484] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.189629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.189774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.191289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.191436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.192929] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.217310] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.221519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.221639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.222164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.222363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.222389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.222651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.223189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.223716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.224264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.225387] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.226490] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.227282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.227441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.227600] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.227736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.228337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.228495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.228512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.228640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.229721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.229871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.230640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.231153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.231160] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.231329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.257007] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.257013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.257130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.257274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.258829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.258980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.260413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.284728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.289543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.289653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.290125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.290329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.290353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.290594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.291117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.291670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.292192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.293449] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.294523] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.295181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.295343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.295497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.295642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.296228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.296370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.296386] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.296568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.297661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.297782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.298467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.298996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.299003] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.299173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.327077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.327082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.327199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.327343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.328876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.329026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.330407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.354729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.360094] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.360234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.360763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.360983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.361008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.361190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.361705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.362189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.362761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.363919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.365020] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.365786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.365944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.366085] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.366219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.366831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.367045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.367061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.367183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.368345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.368465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.369430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.369976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.369982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.370149] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.397488] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.397494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.397610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.397754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.398789] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.398938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.400368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.424749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.430095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.430236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.430764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.430979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.431005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.431189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.431743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.432239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.432802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.433985] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.434935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.435740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.435908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.436045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.436178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.436807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.436967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.436983] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.437111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.438191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.438309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.439003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.439545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.439553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.439723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.468158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.468163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.468279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.468423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.469945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.470097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.471518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.495808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.499370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.499492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.500001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.500145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.500164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.500288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.500786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.501276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.501869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.503011] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.504091] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.504862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.505022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.505173] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.505367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.506031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.506215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.506232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.506363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.507452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.507587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.508266] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.508817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.508823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.508942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.536241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.536246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.536363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.536564] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.538154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.538307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.539502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.563813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.568582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.568693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.569172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.569377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.569402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.569597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.570136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.570688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.571214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.572301] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.573375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.574184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.574346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.574502] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.574640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.575228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.575372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.575388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.575529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.576613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.576733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.577427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.577957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.577964] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.578134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.605573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.605579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.605696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.605840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.607356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.607555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.609002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.633335] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.637486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.637595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.638070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.638269] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.638295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.638502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.639083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.639594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.640130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.641243] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.642330] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.642971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.643131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.643272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.643407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.644013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.644159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.644175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.644301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.645383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.645517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.646208] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.646738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.646745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.646915] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.673190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.673196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.673326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.673469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.675045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.675197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.676490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.700903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.704417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.704539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.705013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.705159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.705178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.705306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.705791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.706293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.706861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.708198] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.709288] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.710054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.710280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.710491] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.710684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.711297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.711445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.711461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.711607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.712701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.712823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.713508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.714015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.714020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.714136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.739834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.739839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.739970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.740114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.741644] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.741797] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.743153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.767527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.771656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.771759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.772229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.772373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.772392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.772534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.773055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.773582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.774126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.775337] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.776460] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.777079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.777237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.777375] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.777527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.778119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.778327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.778349] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.778554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.779713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.779834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.780533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.781036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.781042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.781158] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.806873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.806878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.806994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.807138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.808648] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.808798] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.810180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.834540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.838581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.838687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.839156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.839300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.839319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.839443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.839921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.840445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.841014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.842218] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.843308] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.844051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.844209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.844349] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.844498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.845126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.845337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.845360] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.845561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.846680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.846798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.847501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.847989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.847994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.848113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.874942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.874948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.875064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.875207] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.876736] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.876887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.878319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.902678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.906306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.906414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.906930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.907074] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.907093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.907217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.907713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.908202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.908795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.910009] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.911091] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.911876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.912034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.912198] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.912392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.913061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.913236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.913257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.913384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.914475] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.914607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.915294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.915830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.915835] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.915951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [125.942166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.942171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [125.942287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.942431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [125.943967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [125.944135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [125.945488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [125.969828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [125.973515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [125.973624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.974094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.974238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [125.974258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [125.974396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.974890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [125.975401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [125.975967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [125.977098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [125.978207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [125.978977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [125.979136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [125.979275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [125.979410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [125.980007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [125.980152] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [125.980169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [125.980293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [125.981363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.981492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [125.982190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [125.982699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [125.982704] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [125.982838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.009102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.009107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.009224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.009367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.010395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.010658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.012074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.036424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.039966] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.040066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.040545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.040752] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.040771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.040895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.041364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.041894] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.042441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.043706] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.044801] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.045516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.045675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.045815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.045950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.046551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.046696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.046712] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.046840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.047910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.048030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.048725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.049220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.049226] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.049342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.076108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.076113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.076228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.076371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.078006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.078028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.079410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.103778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.107485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.107592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.108062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.108206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.108225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.108352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.108850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.109362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.109958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.111075] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.112179] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.112879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.113038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.113177] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.113311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.113924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.114073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.114089] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.114215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.115283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.115401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.116099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.116631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.116636] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.116752] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.141911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.141916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.142032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.142174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.143206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.143322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.144500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.168884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.173602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.173732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.174210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.174362] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.174383] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.174538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.175045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.175583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.176132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.177383] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.178464] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.179239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.179397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.179550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.179686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.180286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.180431] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.180447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.180585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.181671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.181793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.182473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.182991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.182996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.183125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.210995] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.211000] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.211115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.211257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.212910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.212931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.214147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.238463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.242524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.242625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.243095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.243239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.243258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.243382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.243880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.244378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.244952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.246042] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.247138] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.247888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.248047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.248185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.248319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.248931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.249078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.249094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.249219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.250289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.250408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.251109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.251637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.251644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.251762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.276382] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.276386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.276567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.276747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.278237] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.278351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.279503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.303861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.307511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.307620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.308090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.308234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.308253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.308379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.308876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.309389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.309962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.311095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.312227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.312988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.313148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.313287] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.313421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.314020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.314164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.314180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.314308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.315377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.315513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.316201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.316716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.316721] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.316837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.343573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.343578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.343696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.343838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.344874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.345013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.346392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.370788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.375574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.375703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.376185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.376341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.376362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.376520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.376990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.377529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.378070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.379316] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.380379] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.381142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.381323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.381503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.381646] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.382253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.382410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.382428] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.382570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.383666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.383803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.384507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.384980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.384986] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.385107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.410826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.410832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.410958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.411107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.412139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.412259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.413547] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.437942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.442518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.442626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.443095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.443239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.443258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.443382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.443878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.444393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.444955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.446215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.447304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.448050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.448208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.448347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.448501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.449102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.449247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.449263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.449391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.450486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.450605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.451280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.451806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.451812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.451930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.475975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.475980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.476122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.476264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.477756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.477948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.479375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.503748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.508538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.508662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.509139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.509319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.509339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.509472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.510024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.510519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.511084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.512202] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.513295] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.514048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.514207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.514347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.514495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.515095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.515239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.515255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.515381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.516470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.516599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.517276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.517819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.517827] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.517957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.543641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.543646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.543763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.543904] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.545103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.545125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.546474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.570831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.574378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.574494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.574993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.575136] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.575155] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.575280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.575758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.576264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.576844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.578142] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.579240] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.580026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.580184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.580324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.580459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.581096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.581238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.581253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.581376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.582522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.583092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.583808] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.584303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.584309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.584437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.609556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.609561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.609690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.609832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.611340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.611514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.612901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.637272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.641520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.641628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.642099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.642243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.642262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.642401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.642958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.643446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.644022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.645152] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.646207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.646970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.647128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.647267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.647402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.648014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.648159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.648175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.648301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.649380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.649509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.650201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.650739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.650747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.650867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.676006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.676010] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.676126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.676269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.677306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.677446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.678903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.703298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.706879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.706988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.707458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.707612] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.707654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.707792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.708248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.708815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.709336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.710513] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.711511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.712269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.712426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.712577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.712713] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.713301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.713444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.713460] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.713606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.714700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.714819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.715519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.716009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.716014] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.716131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.740714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.740721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.740852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.740994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.742586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.742608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.743984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.768332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.773250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.773379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.773916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.774062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.774081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.774206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.774699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.775200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.775758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.776842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.777931] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.778679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.778837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.778975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.779110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.779711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.779858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.779873] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.780001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.781082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.781200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.781898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.782397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.782403] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.782537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.806024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.806029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.806145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.806287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.807320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.807432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.808857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.833256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.838190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.838314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.838866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.839026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.839046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.839172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.839643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.840165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.840723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.841841] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.842933] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.843679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.843836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.843974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.844108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.844705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.844850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.844866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.844990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.846059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.846181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.846884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.847381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.847386] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.847509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.872130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.872135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.872251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.872393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.874099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.874129] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.875432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.899774] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.903360] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.903467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.903978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.904122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.904141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.904268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.904774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.905252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.905858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.907169] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.908212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.908974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.909132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.909271] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.909407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.910022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.910190] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.910206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.910333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.911425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.911555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.912232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.912772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.912780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.912897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [126.936948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.936965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [126.937082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.937225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [126.938766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [126.938925] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [126.940320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [126.964699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [126.969503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [126.969627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.970092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.970272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [126.970292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [126.970426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.970956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [126.971441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [126.972029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [126.973206] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [126.974323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [126.975085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [126.975244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [126.975383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [126.975552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [126.976175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [126.976317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [126.976332] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [126.976457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [126.977608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.977724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [126.978437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [126.979466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [126.979471] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [126.979630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.004275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.004280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.004393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.004587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.005606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.005794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.007210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.031601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.035212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.035319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.035797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.035977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.035995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.036164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.036695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.037162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.037741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.038983] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.040075] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.040861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.041022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.041161] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.041296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.041902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.042048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.042064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.042189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.043271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.043389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.044073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.044625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.044630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.044746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.069358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.069362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.069513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.069662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.070643] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.070816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.072158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.096553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.100087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.100189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.100668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.100841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.100860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.100983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.101452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.101982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.102574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.103695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.104514] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.105301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.105459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.105631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.105764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.106361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.106541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.106556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.106678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.108258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.108376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.109067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.109595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.109602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.109717] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.136482] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.136487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.136630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.136775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.137788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.137903] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.139148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.163519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.167683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.167788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.168260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.168403] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.168422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.168560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.169026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.169554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.170116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.171410] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.172352] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.173115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.173273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.173414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.173564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.174164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.174308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.174324] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.174451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.175554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.175673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.176341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.176891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.176898] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.177016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.202155] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.202160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.202276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.202421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.203431] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.203619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.205054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.229425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.233569] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.233672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.234144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.234292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.234311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.234441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.234934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.235442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.236022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.237291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.238383] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.239141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.239301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.239440] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.239590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.240198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.240353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.240369] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.240508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.241648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.241790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.242495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.242979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.242985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.243101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.268218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.268223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.268340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.268512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.269601] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.269731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.271098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.295446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.299021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.299125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.299613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.299790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.299810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.299938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.300410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.300925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.301501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.302770] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.303844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.304613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.304773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.304912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.305048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.305656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.305831] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.305848] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.305975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.307073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.307192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.307871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.308373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.308378] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.308507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.335322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.335327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.335444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.335666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.336710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.336928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.338333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.362726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.366750] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.366857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.367328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.367473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.367502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.367686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.368154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.368684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.369243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.370512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.371512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.372273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.372430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.372586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.372721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.373321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.373467] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.373491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.373620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.374712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.374831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.375168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.375634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.375639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.375758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.400869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.400876] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.401006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.401149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.402825] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.402847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.404147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.428549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.432668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.432770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.433242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.433385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.433403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.433540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.434071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.434597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.435151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.436388] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.437492] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.438254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.438412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.438567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.438702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.439300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.439445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.439461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.439596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.440730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.440850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.441522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.442042] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.442047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.442163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.465629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.465633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.465764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.465907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.467406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.467532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.468911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.493245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.498385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.498539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.499006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.499151] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.499170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.499297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.499776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.500280] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.500849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.502010] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.503090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.503868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.504025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.504164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.504298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.504898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.505045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.505061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.505186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.506257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.506378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.507080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.507601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.507609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.507728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.531810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.531815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.531930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.532073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.533072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.533191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.534487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.558813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.562359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.562466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.562947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.563092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.563112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.563236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.563713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.564219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.564810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.566096] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.567201] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.567964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.568123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.568262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.568398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.569010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.569154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.569170] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.569295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.570369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.570503] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.571187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.571722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.571727] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.571844] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.597563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.597567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.597682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.597825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.598834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.598950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.600321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.624738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.628718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.628828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.629302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.629451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.629470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.629612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.630084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.630609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.631172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.632416] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.633511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.634271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.634430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.634581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.634718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.635319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.635464] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.635491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.635620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.636703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.636827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.637517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.638019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.638025] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.638141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.662723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.662730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.662860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.663002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.664021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.664140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.665491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.689857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.693893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.694000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.694471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.694627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.694681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.694808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.695265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.695815] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.696353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.697513] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.698517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.699275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.699434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.699587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.699724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.700312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.700455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.700472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.700606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.701668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.701786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.702491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.702980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.702985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.703101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.727162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.727167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.727282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.727424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.728503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.728696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.730084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.754426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.757978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.758076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.758557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.758757] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.758776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.758902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.759370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.759899] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.760448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.761724] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.762814] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.763519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.763678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.763816] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.763951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.764559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.764703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.764719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.764845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.765948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.766066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.767019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.767543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.767550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.767668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.793324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.793329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.793445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.793638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.794702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.794856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.796200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.819590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.823150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.823262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.823751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.823940] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.823959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.824092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.824611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.825083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.825689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.826960] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.828054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.828821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.828979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.829119] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.829253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.829863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.830008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.830026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.830153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.831219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.831339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.831975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.832551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.832556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.832672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.857228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.857232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.857347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.857513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.858590] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.858827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.860150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.884520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.888089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.888193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.888674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.888910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.888929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.889053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.889546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.890039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.890646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.891800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.892844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.893611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.893771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.893910] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.894046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.894658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.894824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.894840] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.894966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.896070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.896212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.896930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.897415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.897420] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.897547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.923209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.923214] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.923330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.923473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.925049] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.925181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.926531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [127.950879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [127.955578] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [127.955691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.956172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.956328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [127.956349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [127.956496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.957000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [127.957538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [127.958079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [127.959328] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [127.960427] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [127.961196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [127.961355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [127.961512] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [127.961672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [127.962261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.962406] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [127.962424] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [127.962564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [127.963689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.963836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [127.964536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [127.965018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.965025] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [127.965164] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [127.989742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [127.989747] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [127.989865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [127.990011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [127.991040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [127.991168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [127.992540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.016887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.021544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.021669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.022145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.022298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.022318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.022451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.022970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.023454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.024046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.025235] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.025908] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.026684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.026842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.026983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.027117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.027715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.027892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.027909] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.028035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.029116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.029235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.029926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.030413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.030419] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.030546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.054626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.054644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.054759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.054901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.056519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.056550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.057849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.082231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.086564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.086689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.087155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.087336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.087357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.087523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.088037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.088560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.089125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.090261] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.091384] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.092144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.092304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.092442] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.092595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.093218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.093363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.093380] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.093519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.094627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.094773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.095460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.095969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.095976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.096122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.121277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.121282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.121397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.121592] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.122620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.122765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.124175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.148552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.152101] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.152205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.152689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.152898] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.152917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.153042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.153539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.154027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.154633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.155848] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.156942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.157680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.157839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.157979] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.158114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.158724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.158878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.158894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.159045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.160123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.160242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.160935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.161417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.161422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.161548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.188369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.188373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.188514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.188714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.190205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.190341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.191485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.215868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.220718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.220845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.221323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.221490] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.221512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.221683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.222156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.222679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.223244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.224503] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.225510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.226292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.226451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.226604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.226763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.227352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.227508] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.227525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.227685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.228769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.228915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.229607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.230109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.230114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.230231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.254276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.254281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.254396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.254608] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.255874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.255897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.257152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.281521] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.285600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.285730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.286208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.286350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.286368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.286538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.287075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.287599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.288162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.289272] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.290369] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.290981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.291139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.291278] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.291415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.292033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.292201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.292218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.292359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.293474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.293619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.294297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.294831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.294836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.294981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.320639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.320658] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.320800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.320941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.322430] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.322640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.324031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.348382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.351932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.352032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.352534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.352719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.352738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.352863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.353331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.353857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.354408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.355516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.356518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.357298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.357457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.357610] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.357770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.358370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.358524] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.358543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.358702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.359784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.359930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.360627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.361126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.361132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.361248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.388567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.388572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.388703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.388847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.390444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.390466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.391895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.416277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.419878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.420004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.420494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.420709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.420728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.420855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.421318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.421850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.422402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.423517] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.424517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.425327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.425500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.425674] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.425807] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.426392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.426543] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.426583] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.426756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.427880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.427998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.429430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.429977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.429982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.430166] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.454754] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.454759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.454887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.455031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.456684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.456707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.458051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.482384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.486041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.486177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.486703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.486914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.486934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.487059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.487554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.488053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.488627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.489778] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.490844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.491612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.491770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.491909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.492045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.492642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.492812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.492828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.492955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.494057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.494179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.494859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.495371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.495377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.495505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.520151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.520156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.520271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.520415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.521462] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.521650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.523061] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.547416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.550994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.551104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.551592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.551833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.551853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.551980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.552449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.552979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.553549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.554708] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.555804] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.556516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.556698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.556834] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.556966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.557588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.557781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.557797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.557922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.559042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.559173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.559890] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.560372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.560377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.560503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.586194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.586199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.586315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.586457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.588119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.588141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.589507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.613888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.618732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.618857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.619334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.619512] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.619533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.619710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.620181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.620703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.621268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.622380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.623466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.624239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.624398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.624549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.624710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.625308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.625453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.625469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.625607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.626734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.626880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.627639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.628085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.628093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.628228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.654429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.654434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.654586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.654810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.655821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.656033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.657381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.681765] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.685888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.686023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.686540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.686746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.686766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.686896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.687368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.687883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.688456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.689514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.690517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.691297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.691455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.691608] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.691768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.692368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.692524] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.692541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.692701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.693792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.693937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.694636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.695135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.695140] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.695257] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.720344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.720349] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.720464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.720678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.721742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.721888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.723185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.747518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.751067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.751169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.751648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.751881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.751900] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.752025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.752501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.753010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.753602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.754772] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.755846] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.756614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.756773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.756912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.757047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.757654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.757808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.757824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.757976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.759009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.759139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.759838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.760323] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.760328] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.760445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.787752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.787757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.787886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.788027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.789684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.789706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.791052] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.815400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.818986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.819096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.819585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.819824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.819844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.819969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.820437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.820966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.821523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.822846] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.823942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.824681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.824839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.824980] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.825116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.825764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.825974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.825990] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.826116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.827181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.827311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.828060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.829095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.829100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.829215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.856533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.856538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.856668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.856810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.858415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.858437] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.859859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.884236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.888854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.888982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.889461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.889652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.889673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.889844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.890311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.890863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.891391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.892514] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.893518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.894298] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.894457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.894635] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.894806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.895392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.895570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.895589] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.895750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.897337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.897487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.898227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.898720] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.898727] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.898867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.922972] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.922977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.923095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.923251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.924840] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.924862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.926149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [128.950505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [128.954060] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [128.954162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.954645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.954818] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [128.954838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [128.954967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.955439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [128.955955] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [128.956526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [128.957801] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [128.958841] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [128.959608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [128.959767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [128.959908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [128.960042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [128.960641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.960810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [128.960827] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [128.960977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [128.962080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.962199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [128.962907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [128.963388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.963393] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [128.963518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [128.990882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [128.990899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [128.991015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [128.991158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [128.992187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [128.992310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [128.993486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.017815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.021907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.022015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.022492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.022703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.022722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.022847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.023302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.023854] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.024393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.025778] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.026840] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.027605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.027764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.027903] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.028039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.028635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.028804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.028820] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.028949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.030049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.030170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.030865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.031368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.031375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.031531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.057224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.057229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.057344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.057513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.058606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.058785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.060175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.084529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.088096] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.088200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.088683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.088856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.088876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.089004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.089489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.089992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.090573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.091845] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.092939] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.093686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.093844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.093983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.094119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.094717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.094886] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.094902] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.095028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.096109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.096228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.096915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.097395] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.097400] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.097526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.122693] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.122698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.122829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.122971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.124646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.124669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.126043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.150404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.153937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.154039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.154519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.154692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.154712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.154840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.155312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.155839] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.156393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.157515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.158518] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.159300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.159461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.159616] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.159777] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.160377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.160532] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.160555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.160709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.161803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.161947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.162633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.163130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.163135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.163251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.187304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.187309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.187424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.187640] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.188693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.188835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.190175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.214543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.218099] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.218203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.218682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.218902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.218921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.219049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.219547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.220034] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.220641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.221800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.222840] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.223606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.223764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.223904] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.224040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.224649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.224817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.224833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.224960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.226043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.226164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.226860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.227358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.227363] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.227489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.254306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.254311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.254429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.254623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.255703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.255846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.257175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.281518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.285087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.285205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.285693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.285904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.285924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.286051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.286548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.287035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.287616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.288848] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.289943] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.290685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.290844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.290984] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.291119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.291728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.291897] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.291913] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.292039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.293110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.293254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.293942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.294431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.294437] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.294562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.320318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.320323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.320437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.320651] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.322211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.322338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.323523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.347888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.352726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.352851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.353329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.353504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.353530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.353717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.354187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.354710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.355264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.356406] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.357505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.358267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.358426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.358576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.358710] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.359308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.359453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.359469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.359607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.360689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.360811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.361506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.362015] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.362020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.362146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.386220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.386224] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.386337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.386488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.387578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.387790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.389149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.413519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.417551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.417654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.418124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.418267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.418286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.418413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.418926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.419409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.420001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.421165] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.422230] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.422998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.423156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.423296] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.423432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.424049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.424226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.424242] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.424371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.425449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.425623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.426313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.426826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.426831] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.426974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.452128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.452133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.452248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.452392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.453425] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.453679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.455067] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.479393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.483002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.483100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.483598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.483782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.483801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.483928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.484397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.484926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.485485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.486518] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.487516] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.488307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.488465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.488620] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.488779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.489367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.489524] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.489540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.489679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.490783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.490927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.491622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.492133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.492138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.492255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.515737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.515742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.515874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.516018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.517049] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.517185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.518519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.542879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.547712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.547838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.548317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.548495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.548529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.548692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.549163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.549685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.550250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.551394] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.552505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.553268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.553427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.553577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.553737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.554327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.554471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.554495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.554646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.555740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.555892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.556590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.557084] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.557091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.557240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.582325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.582330] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.582445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.582643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.583717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.583868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.585149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.609522] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.613555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.613659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.614134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.614281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.614300] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.614429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.614921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.615429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.615998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.617238] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.618339] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.619107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.619265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.619404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.619555] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.620178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.620345] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.620361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.620500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.621653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.621796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.622464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.622990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.622998] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.623136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.647181] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.647185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.647301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.647443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.648969] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.649079] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.650507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.674847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.678394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.678508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.678979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.679123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.679142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.679268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.679770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.680256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.680828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.682194] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.683290] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.684054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.684212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.684352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.684501] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.685121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.685289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.685306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.685435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.686534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.686654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.687342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.687864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.687869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.688015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.713185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.713190] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.713304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.713448] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.715024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.715145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.716526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.740883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.744453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.744567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.745037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.745181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.745200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.745324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.745824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.746307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.746894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.748182] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.749240] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.750009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.750168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.750307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.750442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.751059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.751232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.751255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.751385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.752487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.752606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.753296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.753819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.753824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.753967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.778024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.778029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.778143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.778287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.779968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.779990] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.781360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.804732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.808214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.808338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.808857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.809028] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.809047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.809171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.809666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.810155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.810751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.811845] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.812941] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.813680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.813840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.813980] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.814115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.814725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.814896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.814912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.815038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.816117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.816237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.816935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.817418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.817425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.817576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.844334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.844339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.844454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.844619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.845875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.845898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.847174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.871527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.875059] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.875161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.875661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.875844] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.875864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.875988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.876456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.876985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.877556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.878709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.879805] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.880518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.880700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.880835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.880995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.881590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.881777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.881793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.881931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.883035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.883158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.883867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.884350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.884355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.884471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.908536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.908541] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.908671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.908813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.909834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.909996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.911370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [129.935741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [129.940544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [129.940667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.941146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.941298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [129.941319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [129.941454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.941973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [129.942457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [129.943049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [129.944228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [129.945056] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [129.945825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [129.945983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [129.946121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [129.946257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [129.946870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.947080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [129.947096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [129.947218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [129.947943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.948069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [129.948799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [129.949281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.949288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [129.949430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [129.975132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [129.975137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [129.975252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [129.975395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [129.976435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [129.976591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [129.977979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.002356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.005977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.006084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.006562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.006770] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.006790] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.006914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.007374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.007911] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.008459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.009520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.010517] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.011323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.011497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.011685] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.011832] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.012420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.012576] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.012593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.012745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.013816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.013970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.014670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.015161] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.015166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.015283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.040433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.040438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.040596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.040812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.041845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.041986] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.043373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.067717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.071756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.071865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.072336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.072487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.072530] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.072699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.073168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.073694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.074256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.075455] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.076461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.077243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.077400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.077553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.077711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.078311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.078456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.078472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.078607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.079725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.079871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.080570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.081071] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.081076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.081195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.107413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.107418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.107592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.107791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.108824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.108964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.110346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.134754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.139571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.139695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.140173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.140325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.140345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.140488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.141027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.141574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.142103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.143353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.144454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.145238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.145396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.145549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.145719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.146308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.146454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.146470] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.146605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.147709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.147857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.148556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.149059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.149066] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.149215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.177611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.177616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.177734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.177881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.179388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.179604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.180981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.205362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.210330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.210457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.210957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.211131] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.211151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.211279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.211760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.212266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.212835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.214098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.215214] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.215983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.216142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.216280] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.216415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.217017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.217185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.217202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.217327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.218408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.218536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.219211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.219714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.219719] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.219871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.245043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.245048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.245163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.245307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.246343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.246469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.247903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.272287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.277206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.277335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.277842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.278030] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.278051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.278178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.278674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.279174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.279732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.280919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.282011] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.282767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.282927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.283065] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.283200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.283802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.283972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.283988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.284117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.285220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.285341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.285983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.286545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.286550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.286692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.311306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.311310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.311428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.311641] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.312699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.312912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.314328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.338660] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.342213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.342339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.342839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.343011] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.343031] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.343159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.343641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.344145] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.344726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.346009] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.347099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.347890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.348047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.348187] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.348323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.348933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.349110] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.349127] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.349252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.350353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.350472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.351179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.351705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.351710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.351852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.375888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.375893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.376011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.376158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.377721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.377857] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.379193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.403527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.407087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.407205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.407693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.407913] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.407933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.408061] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.408578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.409062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.409645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.410797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.411842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.412612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.412770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.412909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.413045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.413653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.413823] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.413839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.413965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.414988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.415119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.415822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.416313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.416318] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.416434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.442116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.442120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.442235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.442377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.443395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.443551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.444938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.469321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.474133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.474272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.474792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.474983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.475003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.475128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.475621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.476128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.476702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.477973] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.479070] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.479693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.479853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.479993] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.480128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.480727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.480895] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.480912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.481041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.482123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.482243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.482938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.483422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.483427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.483553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.509812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.509817] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.509946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.510088] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.511112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.511250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.512522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.536620] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.540713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.540857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.541324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.541465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.541511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.541693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.542162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.542687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.543250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.544385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.545471] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.546109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.546266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.546405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.546566] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.547188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.547331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.547347] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.547470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.549071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.549223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.549897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.550402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.550407] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.550530] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.577936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.577941] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.578085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.578228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.579957] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.579979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.581350] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.605733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.610497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.610621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.611096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.611248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.611269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.611404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.611919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.612407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.612998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.614159] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.614930] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.615681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.615840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.615978] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.616114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.616725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.616932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.616948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.617072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.618153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.618279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.618981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.619440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.619446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.619569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.643716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.643721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.643837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.643980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.645611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.645658] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.646977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.671355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.674993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.675119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.675608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.675842] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.675862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.675986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.676452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.676984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.677567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.678726] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.679823] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.680591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.680760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.680897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.681057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.681673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.681870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.681887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.682015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.683093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.683215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.683901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.684396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.684401] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.684527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.709158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.709163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.709278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.709420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.710984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.711118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.712474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.736855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.740403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.740518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.740990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.741133] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.741153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.741280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.741780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.742262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.742858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.744013] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.745096] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.745761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.745919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.746060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.746195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.746804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.746968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.746984] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.747138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.748285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.748402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.749629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.750178] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.750183] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.750297] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.782003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.782011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.782149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.782302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.784037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.784065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.785420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.809712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.815122] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.815260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.815772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.815961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.815980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.816105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.816629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.817118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.817702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.819011] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.820096] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.820906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.821069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.821209] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.821343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.821944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.822105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.822122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.822247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.823320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.823453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.824144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.824677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.824684] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.824823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.850462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.850467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.850621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.850842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.852345] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.852476] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.853921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.878295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.883009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.883184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.883759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.883951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.883973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.884106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.884603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.885142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.885739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.887101] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.888245] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.888887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.889086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.889249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.889385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.889985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.890132] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.890151] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.890278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.890995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.891116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.891814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.892308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.892315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.892437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.916487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.916507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.916638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.916782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.917804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.917976] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.919352] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [130.943733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [130.948531] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [130.948655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.949134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.949285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [130.949305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [130.949437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.949938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [130.950438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [130.951025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [130.952171] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [130.953212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [130.953975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [130.954132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [130.954271] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [130.954406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [130.955018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.955162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [130.955178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [130.955306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [130.956386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.956514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [130.957197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [130.957726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.957731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [130.957850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [130.983574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [130.983579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [130.983692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [130.983834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [130.985356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [130.985519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [130.986908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.011257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.015574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.015698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.016173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.016324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.016344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.016507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.016996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.017521] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.018084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.019238] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.020361] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.021126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.021284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.021423] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.021589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.022234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.022376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.022391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.022532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.023678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.023831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.024573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.025035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.025040] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.025154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.051375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.051381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.051528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.051714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.053238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.053359] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.054550] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.078883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.084326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.084448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.085024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.085174] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.085194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.085321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.085852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.086334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.086912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.088013] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.089094] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.089905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.090063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.090203] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.090338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.090954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.091103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.091119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.091244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.092381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.092512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.093432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.093946] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.093953] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.094105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.120907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.120912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.121040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.121182] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.122743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.122882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.124170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.148557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.154557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.154686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.155162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.155309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.155328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.155460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.156018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.156531] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.157081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.158226] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.159376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.160140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.160300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.160439] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.160604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.161197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.161339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.161355] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.161505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.162622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.162748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.164189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.164768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.164775] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.164927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.190623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.190628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.190754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.190896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.192411] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.192552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.193940] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.218273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.223268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.223396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.223927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.224080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.224100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.224225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.224756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.225225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.225805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.226935] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.228008] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.228767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.228926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.229065] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.229200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.229803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.229957] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.229973] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.230099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.231200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.231322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.232040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.232550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.232557] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.232682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.256158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.256162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.256277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.256419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.257496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.257637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.259046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.283383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.288358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.288532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.289027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.289226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.289246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.289371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.289904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.290396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.290993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.292127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.293223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.293987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.294146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.294286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.294421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.295032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.295183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.295199] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.295325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.296398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.296529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.297218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.297739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.297746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.297876] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.323048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.323053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.323168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.323310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.324859] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.325001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.326371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.350596] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.355503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.355626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.356100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.356253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.356273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.356405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.356928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.357437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.358016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.359146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.360249] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.361044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.361216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.361352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.361502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.362105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.362246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.362262] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.362384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.363517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.364095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.364821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.365306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.365311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.365454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.391151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.391156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.391272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.391415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.392960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.393074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.394433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.418749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.424650] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.424784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.425260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.425408] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.425428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.425623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.426104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.426641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.427180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.428300] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.429384] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.430140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.430299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.430438] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.430603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.431194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.431335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.431351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.431476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.433080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.433197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.433958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.434511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.434518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.434655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.461405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.461409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.461538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.461737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.463405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.463451] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.464504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.488897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.493023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.493156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.493652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.493890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.493910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.494034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.494535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.495033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.495602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.496725] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.497817] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.498519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.498679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.498819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.498953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.499558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.499711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.499728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.499853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.500947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.501074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.501773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.502262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.502268] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.502386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.526423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.526428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.526605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.526789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.528292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.528407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.529503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.553842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.559279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.559405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.559907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.560111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.560131] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.560256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.560741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.561240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.561829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.562927] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.563841] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.564606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.564773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.564910] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.565041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.565649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.565799] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.565815] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.565938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.567050] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.567237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.567946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.568452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.568457] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.568610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.595417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.595422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.595549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.595718] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.597220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.597338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.598487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.622808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.627730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.627853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.628328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.628507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.628546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.628711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.629180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.629705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.630267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.631515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.632520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.633283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.633441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.633601] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.633742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.634341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.634499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.634522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.634649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.635738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.635869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.636566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.637060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.637065] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.637184] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.663387] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.663391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.663568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.663751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.665273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.665389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.666503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.690845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.694475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.694589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.695059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.695201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.695221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.695344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.695826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.696327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.696926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.698223] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.699020] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.699652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.699820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.699972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.700119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.700748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.700939] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.700955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.701107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.702188] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.702305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.703508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.704052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.704057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.704212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.730413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.730418] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.730590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.730775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.732263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.732378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.733504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.757895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.763294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.763418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.763957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.764106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.764125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.764253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.764783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.765254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.765833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.766962] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.768054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.768814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.768973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.769113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.769248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.769852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.770006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.770023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.770151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.771232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.771351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.772064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.772578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.772585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.772709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.796197] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.796202] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.796318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.796461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.798164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.798186] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.799519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.823852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.829299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.829422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.829987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.830148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.830168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.830293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.830824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.831295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.831874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.832993] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.833953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.834717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.834876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.835014] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.835150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.835765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.835915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.835931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.836054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.837157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.837278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.838223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.838760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.838782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.838908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.859670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.859675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.859796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.859941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.861448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.861582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.862930] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.887304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.890922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.891047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.891564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.891759] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.891780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.891905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.892390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.892910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.893461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.894516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.895519] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.896281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.896440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.896623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.896767] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.897356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.897520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.897540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.897669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.898759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.898886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.899590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.900068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.900073] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.900189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.926371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.926376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.926545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.926713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.928260] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.928377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.929503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [131.953866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [131.958711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [131.958845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.959323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.959476] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [131.959533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [131.959688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.960172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [131.960707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [131.961234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [131.962332] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [131.963425] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [131.964185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [131.964344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [131.964498] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [131.964640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [131.965228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.965373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [131.965389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [131.965533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [131.966638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.966764] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [131.967463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [131.967934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.967942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [131.968066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [131.994249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [131.994254] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [131.994369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [131.994571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [131.996091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [131.996209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [131.997485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.021821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.027243] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.027369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.027893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.028044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.028078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.028217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.028730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.029217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.029795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.030846] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.031937] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.032681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.032840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.032979] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.033114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.033752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.033914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.033930] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.034056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.035130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.035249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.035965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.036444] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.036450] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.036583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.065012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.065017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.065131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.065274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.066807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.066962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.068336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.092778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.098221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.098399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.099024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.099290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.099321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.099574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.100164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.100719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.101307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.102542] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.103253] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.103807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.104038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.104185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.104328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.104937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.105099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.105115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.105248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.106338] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.106464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.107172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.107671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.107678] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.107814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.130766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.130770] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.130888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.131035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.132572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.132739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.134086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.158417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.162072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.162182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.162711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.162894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.162913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.163039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.163552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.164024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.164641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.165929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.166844] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.167608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.167767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.167905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.168040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.168655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.168808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.168824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.168950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.169638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.169757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.170443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.170948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.170955] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.171081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.195661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.195665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.195797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.195939] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.196972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.197141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.198484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.222791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.226322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.226428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.226919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.227068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.227087] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.227212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.227709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.228196] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.228809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.230099] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.231059] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.231823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.231982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.232120] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.232256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.232874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.233028] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.233044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.233170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.234250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.234373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.235060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.235606] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.235613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.235738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.261373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.261378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.261523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.261712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.263248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.263367] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.264520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.288883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.292428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.292543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.293013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.293157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.293176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.293302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.293808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.294286] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.294907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.296048] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.297145] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.297892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.298051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.298190] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.298325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.298939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.299091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.299108] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.299233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.300315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.300435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.301114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.301678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.301685] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.301809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.326368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.326373] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.326536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.326704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.328238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.328357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.329489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.353820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.357859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.357967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.358437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.358602] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.358649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.358787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.359271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.359783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.360344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.361688] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.362782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.363519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.363678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.363817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.363953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.364568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.364720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.364737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.364862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.365955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.366079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.366771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.367270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.367275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.367391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.394173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.394178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.394322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.394465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.396053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.396209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.397487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.421805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.425332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.425440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.425930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.426078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.426096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.426223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.426702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.427205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.427826] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.428959] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.430075] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.430682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.430849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.430985] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.431117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.431721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.431901] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.431917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.432040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.433099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.433236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.433956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.434433] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.434438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.434564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.460315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.460319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.460434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.460659] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.461796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.461818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.463188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.487532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.491094] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.491213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.491706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.491890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.491909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.492037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.492525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.493021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.493633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.494771] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.495845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.496620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.496779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.496918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.497054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.497659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.497824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.497841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.497970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.499035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.499158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.499891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.500350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.500355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.500471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.526761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.526766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.526882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.527025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.528533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.528648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.530001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.554331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.558520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.558640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.559105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.559245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.559278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.559443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.559997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.560508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.561056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.562200] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.563298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.564055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.564215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.564356] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.564507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.565111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.565256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.565272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.565397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.566488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.566607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.567295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.567833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.567840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.567965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.595261] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.595266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.595382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.595606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.596635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.596784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.598188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.622570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.626110] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.626214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.626697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.626883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.626902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.627025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.627512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.628009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.628622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.629756] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.630843] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.631608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.631767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.631905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.632040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.632657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.632809] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.632826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.632952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.634057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.634176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.634882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.635365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.635371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.635499] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.660692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.660697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.660813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.660957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.662473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.662640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.664010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.688372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.692557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.692691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.693158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.693298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.693317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.693441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.693969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.694493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.695044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.696212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.697310] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.698057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.698215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.698355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.698510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.699118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.699263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.699279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.699405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.700526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.700645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.701333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.701840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.701847] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.701973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.726557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.726562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.726717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.726859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.728361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.728511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.729896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.754252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.758846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.758972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.759451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.759625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.759669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.759808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.760305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.760830] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.761393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.762675] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.763766] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.764518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.764677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.764817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.764953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.765590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.765771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.765786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.765909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.767517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.767650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.768363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.769400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.769407] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.769579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.793036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.793040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.793169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.793312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.794535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.794582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.795912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.820293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.825179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.825311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.825809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.825971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.825992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.826120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.826600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.827118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.827685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.828941] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.830008] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.830767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.830927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.831067] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.831201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.831805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.831959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.831975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.832103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.833204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.833324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.834018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.834506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.834513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.834638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.858699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.858704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.858822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.858965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.859991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.860119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.861514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.885850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.889390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.889505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.889972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.890115] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.890134] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.890258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.890746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.891242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.891821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.893099] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.894220] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.895012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.895170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.895309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.895444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.896078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.896254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.896270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.896410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.897578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.897695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.898381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.898907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.898914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.899034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.927428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.927433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.927560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.927729] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.928919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.928941] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.930362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [132.954751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [132.959572] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [132.959709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.960215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.960368] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [132.960389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [132.960588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.961084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [132.961619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [132.962159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [132.963281] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [132.964383] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [132.965137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [132.965297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [132.965437] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [132.965600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [132.966192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.966335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [132.966350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [132.966476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [132.967623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.967739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [132.968718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [132.969207] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.969212] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [132.969326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [132.995567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [132.995572] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [132.995730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [132.995873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [132.996905] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [132.997034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [132.998406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.022746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.027305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.027428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.027927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.028078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.028097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.028223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.028705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.029207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.029798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.030956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.032050] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.032817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.032978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.033118] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.033253] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.033860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.034015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.034032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.034158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.035236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.035356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.036048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.036572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.036579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.036703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.062358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.062363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.062487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.062659] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.064405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.064426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.065882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.090261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.094540] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.094650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.095124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.095270] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.095289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.095419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.095913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.096422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.097002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.098226] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.099321] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.100056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.100214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.100353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.100507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.101114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.101259] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.101275] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.101403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.102531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.102651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.103340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.103868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.103875] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.104001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.129641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.129646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.129793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.129936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.130968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.131150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.132513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.156878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.161715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.161839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.162319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.162470] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.162522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.162718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.163201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.163725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.164288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.165425] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.166512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.167273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.167433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.167590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.167732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.168332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.168486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.168509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.168644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.169738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.169864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.170564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.171054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.171059] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.171187] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.197367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.197372] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.197537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.197704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.199208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.199356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.200503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.224871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.229708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.229832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.230309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.230461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.230513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.230693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.231191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.231715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.232278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.233378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.234470] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.235093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.235251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.235391] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.235557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.236162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.236305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.236321] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.236443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.237613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.237733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.239141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.239741] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.239748] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.239882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.263398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.263403] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.263577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.263761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device
<7> [133.265332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.265624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.267007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended
<7> [133.291343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device
<7> [133.294932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed
<7> [133.295057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.295553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.295706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.295725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.295851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.296331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.296835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.297407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.298671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.299765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.300521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.300679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.300819] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.300954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.301570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.301721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.301737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.301862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.302933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.303057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.303755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.304248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.304253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.304369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<6> [133.308142] [IGT] i915_pm_rpm: exiting, ret=98
<6> [133.309804] Console: switching to colour frame buffer device 128x48
<7> [133.332843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.332848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.332983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.333125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.333149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]
<7> [133.333274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.333768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.333950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1
<7> [133.334036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]
<7> [133.334162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.334650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.335161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.335744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [133.336842] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00
<7> [133.337934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000
<7> [133.338693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [133.338864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.339000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.339159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.339799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.339954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1
<7> [133.339970] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]
<7> [133.340093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.341185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.341314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [133.342052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
<7> [133.342570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.342574] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [133.342785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
<7> [133.368965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
<7> [133.368970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
<7> [133.369087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [133.369227] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6
<7> [133.369448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [133.369693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [133.370144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [133.370803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [133.370945] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [133.371079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [133.371681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
Created at 2023-08-20 22:43:00