Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g2741053c5 (x86_64) (Linux: 6.5.0-rc7-linus-v6.5-rc7-g706a74159504+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Dmesg
<6> [188.677219] Console: switching to colour dummy device 80x25
<6> [188.677464] [IGT] kms_force_connector_basic: executing
<7> [188.679735] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [188.680382] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [188.680594] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [188.681211] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [188.681219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681242] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681431] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.681472] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.681722] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.681900] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [188.682153] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [188.682281] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [188.682287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.682302] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.682701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.682839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [188.683193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.683331] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.683343] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [188.683472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [188.689110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.689121] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [188.689260] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] status updated from disconnected to connected
<7> [188.689407] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [188.689422] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [188.689428] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [188.689433] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [188.689437] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [188.689441] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [188.689481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.689496] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.689905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.690046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [188.690599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.690763] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.690774] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [188.690903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [188.695397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.695409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [188.695609] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [188.695637] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [188.695643] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [188.695647] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [188.695651] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [188.695654] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [188.695852] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [188.695876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.695892] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.696054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [188.696059] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [188.696289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [188.696417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [188.696769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [188.696903] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [188.697007] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [188.697012] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [188.697019] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [188.697023] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [188.697030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [188.697044] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [188.697049] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [188.697052] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [188.697056] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [188.697059] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [188.697063] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [188.697189] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [188.697214] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.697228] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.697390] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [188.697394] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [188.697399] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 4
<7> [188.697643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [188.697776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [188.698102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [188.698228] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [188.698319] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [188.698324] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [188.698331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [188.698345] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [188.698349] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [188.698353] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [188.698356] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [188.698360] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [188.698462] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [188.698485] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.698499] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.698874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.699003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [188.699340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [188.699465] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.699473] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [188.699596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [188.704071] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [188.704079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [188.704207] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 5
<7> [188.704263] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [188.704268] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [188.704274] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [188.704278] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [188.704285] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [188.704299] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [188.704302] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [188.704306] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [188.704309] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [188.704313] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [188.704459] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [188.704464] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.704480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.704675] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] status updated from connected to disconnected
<7> [188.704700] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.704843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.704857] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.705027] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [188.705358] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [188.705505] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [188.706084] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [188.706091] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [188.706108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [188.706905] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.707047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [188.707637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [188.707775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [188.707906] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [188.708039] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [188.708195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [188.708202] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [188.708207] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [188.708211] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [188.708230] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [188.708362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [188.709130] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.709267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [188.710020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [188.710039] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [188.710045] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [188.710086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [188.710101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [188.710864] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.711004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [188.711583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [188.711723] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [188.711857] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [188.711994] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [188.712151] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [188.712158] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [188.712162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [188.712165] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [188.712182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [188.712319] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [188.713070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.713205] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [188.713880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [188.713897] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [188.713902] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [188.714017] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:185:eDP-1] EDID override reset
<7> [188.714045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [188.714060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [188.714926] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.715066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [188.715636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [188.715771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [188.715905] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [188.716034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [188.716180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [188.716186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [188.716190] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [188.716194] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [188.716210] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [188.716336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [188.717087] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.717222] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [188.717908] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [188.717926] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [188.717931] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [188.718096] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [188.718102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.718338] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.718665] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [188.718686] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718700] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.718857] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.718964] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:203:DP-1] EDID override reset
<7> [188.718981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1]
<7> [188.718995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [188.719169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1] disconnected
<7> [188.719270] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:212:DP-2] EDID override reset
<7> [188.719287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2]
<7> [188.719301] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [188.719470] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2] disconnected
<6> [188.720010] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [188.720126] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [188.720132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.720148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.720316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.720366] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [188.720370] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [188.720384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [188.721179] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.721315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [188.721909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [188.722044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [188.722171] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [188.722297] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [188.722443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [188.722449] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [188.722454] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [188.722458] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [188.722475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [188.722607] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [188.723443] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.723577] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [188.724284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [188.724301] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [188.724307] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [188.724522] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [188.744565] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
<7> [188.744584] [drm:drm_client_modeset_probe]
<7> [188.744635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [188.744654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [188.745484] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.745642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [188.746252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [188.746391] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [188.746523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [188.746690] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [188.746848] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [188.746857] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [188.746861] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [188.746866] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [188.746885] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [188.747022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [188.747809] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [188.747944] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [188.748654] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [188.748673] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [188.748680] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [188.748686] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [188.748701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [188.748867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [188.748882] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1]
<7> [188.748896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [188.749062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1] disconnected
<7> [188.749076] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2]
<7> [188.749090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [188.749255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2] disconnected
<7> [188.749269] [drm:drm_client_modeset_probe] connector 185 enabled? yes
<7> [188.749273] [drm:drm_client_modeset_probe] connector 194 enabled? no
<7> [188.749276] [drm:drm_client_modeset_probe] connector 203 enabled? no
<7> [188.749279] [drm:drm_client_modeset_probe] connector 212 enabled? no
<7> [188.749305] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [188.749315] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 185
<7> [188.749318] [drm:drm_client_modeset_probe] looking for preferred mode on connector 185 0
<7> [188.749321] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [188.749324] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [188.749341] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [188.777990] Console: switching to colour frame buffer device 480x135
Created at 2023-08-20 22:42:59