<5>[ 0.000000] Linux version 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Aug 13 19:04:47 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca3cfff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca3d000-0x000000006fdb4fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb5000-0x000000006fedbfff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fedc000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe11000 SMBIOS=0x6cb14000 MEMATTR=0x67fbe118 ESRT=0x67fbe798 TPMEventLog=0x67ea8018 <6>[ 0.000000] efi: Remove mem281: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem283: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000389] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000392] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000394] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000395] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000398] esrt: Reserving ESRT space from 0x0000000067fbe798 to 0x0000000067fbe910. <7>[ 0.000405] e820: update [mem 0x67fbe000-0x67fbefff] usable ==> reserved <6>[ 0.000423] Using GB pages for direct mapping <6>[ 0.001191] printk: log_buf_len: 1048576 bytes <6>[ 0.001193] printk: early log buf free: 259064(98%) <6>[ 0.001194] Secure boot disabled <6>[ 0.001195] ACPI: Early table checksum verification disabled <6>[ 0.001198] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001202] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001207] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001211] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001214] ACPI: FACS 0x000000006FDF6000 000040 <6>[ 0.001216] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001221] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001224] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001226] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001228] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001231] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001233] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001235] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001238] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001240] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001243] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001245] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001247] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001249] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001252] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001254] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001256] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001259] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001261] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001266] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001268] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001270] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001273] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001275] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001277] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001280] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001282] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001284] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001287] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001289] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001291] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001293] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001296] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001298] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001300] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001303] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001305] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001308] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001310] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001312] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001313] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001314] ACPI: Reserving FACS table memory at [mem 0x6fdf6000-0x6fdf603f] <6>[ 0.001314] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001315] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001316] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001316] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001317] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001318] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001318] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001319] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001320] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001321] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001323] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001324] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001324] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001325] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001326] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001326] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001327] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001328] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001328] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001329] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001330] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001330] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001331] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001332] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001332] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001333] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001334] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001334] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001335] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001336] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001336] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001337] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001338] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001338] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001339] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001340] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001340] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001341] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001353] Setting APIC routing to cluster x2apic. <6>[ 0.045689] Zone ranges: <6>[ 0.045691] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045693] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045695] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045696] Movable zone start for each node <6>[ 0.045697] Early memory node ranges <6>[ 0.045697] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045699] node 0: [mem 0x0000000000100000-0x000000006ca3cfff] <6>[ 0.045700] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045700] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045702] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045706] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045730] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048168] On node 0, zone DMA32: 13762 pages in unavailable ranges <6>[ 0.090449] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090838] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090844] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090889] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090892] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090893] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090896] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090897] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090906] e820: update [mem 0x67fa0000-0x67fbafff] usable ==> reserved <6>[ 0.090913] TSC deadline timer available <6>[ 0.090914] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090924] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090926] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090927] PM: hibernation: Registered nosave memory: [mem 0x67fa0000-0x67fbafff] <6>[ 0.090928] PM: hibernation: Registered nosave memory: [mem 0x67fbe000-0x67fbefff] <6>[ 0.090929] PM: hibernation: Registered nosave memory: [mem 0x6ca3d000-0x6fdb4fff] <6>[ 0.090929] PM: hibernation: Registered nosave memory: [mem 0x6fdb5000-0x6fedbfff] <6>[ 0.090930] PM: hibernation: Registered nosave memory: [mem 0x6fedc000-0x6fffefff] <6>[ 0.090931] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090931] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090932] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090933] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090935] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090939] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.094184] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095668] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095673] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095675] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095681] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095687] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095699] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095771] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095804] random: crng init done <6>[ 0.098609] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.100004] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.100110] Built 1 zonelists, mobility grouping on. Total pages: 8177205 <6>[ 0.100113] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.100114] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100833] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100846] software IO TLB: area num 32. <6>[ 0.766746] Memory: 32435032K/33228656K available (16384K kernel code, 2618K rwdata, 5444K rodata, 2564K init, 21168K bss, 793368K reserved, 0K cma-reserved) <4>[ 0.766750] ********************************************************** <4>[ 0.766750] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.766751] ** ** <4>[ 0.766751] ** This system shows unhashed kernel memory addresses ** <4>[ 0.766752] ** via the console, logs, and other interfaces. This ** <4>[ 0.766752] ** might reduce the security of your system. ** <4>[ 0.766753] ** ** <4>[ 0.766753] ** If you see this message and you are not debugging ** <4>[ 0.766754] ** the kernel, report this immediately to your system ** <4>[ 0.766754] ** administrator! ** <4>[ 0.766755] ** ** <4>[ 0.766755] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.766756] ********************************************************** <6>[ 0.766932] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.767420] Dynamic Preempt: full <6>[ 0.767662] Running RCU self tests <6>[ 0.767663] Running RCU synchronous self tests <6>[ 0.767709] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.767710] rcu: RCU lockdep checking is enabled. <6>[ 0.767710] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.767711] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.767712] Trampoline variant of Tasks RCU enabled. <6>[ 0.767713] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.767714] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.767780] Running RCU synchronous self tests <6>[ 0.772038] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.772407] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.772746] Console: colour dummy device 80x25 <6>[ 0.772761] printk: console [tty1] enabled <6>[ 0.774836] printk: console [ttyS0] enabled <4>[ 2.244391] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.252054] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.256115] ... MAX_LOCK_DEPTH: 48 <4>[ 2.260263] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.264584] ... CLASSHASH_SIZE: 4096 <4>[ 2.268898] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.273298] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.277788] ... CHAINHASH_SIZE: 65536 <4>[ 2.282190] memory used by lock dependency info: 9461 kB <4>[ 2.287538] memory used for stack traces: 8320 kB <4>[ 2.292284] per task-struct memory footprint: 1920 bytes <6>[ 2.297645] ACPI: Core revision 20230331 <6>[ 2.302549] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.311675] APIC: Switch to symmetric I/O mode setup <6>[ 2.316652] DMAR: Host address width 42 <6>[ 2.320497] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.325829] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.334564] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.339882] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.348615] DMAR: SATC flags: 0x1 <6>[ 2.351955] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.358290] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.363678] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.374014] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.384001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.394577] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.405001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.406060] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.406999] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.408188] process: using mwait in idle threads <6>[ 2.409002] CET detected: Indirect Branch Tracking enabled <6>[ 2.410000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.410999] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.412003] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.413003] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.413999] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.415004] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.416003] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.417013] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.418001] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.419000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.420000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.421002] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.422000] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.422999] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.436189] Freeing SMP alternatives memory: 36K <6>[ 2.437001] pid_max: default: 32768 minimum: 301 <6>[ 2.445945] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.446057] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.447552] Running RCU synchronous self tests <6>[ 2.448000] Running RCU synchronous self tests <6>[ 2.449172] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.450439] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.451032] Running RCU-tasks wait API self tests <6>[ 2.561011] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.562120] core: cpu_core PMU driver: <6>[ 2.562999] ... version: 5 <6>[ 2.563998] ... bit width: 48 <6>[ 2.566995] ... generic registers: 8 <6>[ 2.567998] ... value mask: 0000ffffffffffff <6>[ 2.569013] ... max period: 00007fffffffffff <6>[ 2.570000] ... fixed-purpose events: 4 <6>[ 2.570998] ... event mask: 0000000f000000ff <6>[ 2.572064] signal: max sigframe size: 3632 <6>[ 2.573016] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.574071] rcu: Hierarchical SRCU implementation. <6>[ 2.574998] rcu: Max phase no-delay instances is 400. <6>[ 2.577972] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.578559] smp: Bringing up secondary CPUs ... <6>[ 2.579291] smpboot: x86: Booting SMP configuration: <6>[ 2.580009] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.613451] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.613451] ... version: 5 <6>[ 1.613451] ... bit width: 48 <6>[ 1.613451] ... generic registers: 8 <6>[ 1.613451] ... value mask: 0000ffffffffffff <6>[ 1.613451] ... max period: 00007fffffffffff <6>[ 1.613451] ... fixed-purpose events: 3 <6>[ 1.613451] ... event mask: 00000007000000ff <4>[ 2.636275] #1 #3 #5 #7 #9 #11 <6>[ 2.641067] smp: Brought up 1 node, 22 CPUs <6>[ 2.643004] smpboot: Max logical packages: 1 <6>[ 2.643998] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.650172] devtmpfs: initialized <6>[ 2.652022] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb5000-0x6fedbfff] (1208320 bytes) <6>[ 2.653427] Running RCU synchronous self tests <6>[ 2.654015] Running RCU synchronous self tests <6>[ 2.655065] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.656011] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.657270] pinctrl core: initialized pinctrl subsystem <6>[ 2.658431] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.660136] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.660138] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.661000] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.662054] cpuidle: using governor menu <6>[ 2.664070] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.665238] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.666012] PCI: not using MMCONFIG <6>[ 2.667007] PCI: Using configuration type 1 for base access <4>[ 2.669356] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.671074] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.672080] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.673009] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.674005] Callback from call_rcu_tasks() invoked. <6>[ 2.674173] cryptd: max_cpu_qlen set to 1000 <6>[ 2.692992] raid6: avx2x4 gen() 55117 MB/s <6>[ 2.710992] raid6: avx2x2 gen() 55710 MB/s <6>[ 2.728992] raid6: avx2x1 gen() 55640 MB/s <6>[ 2.729998] raid6: using algorithm avx2x2 gen() 55710 MB/s <6>[ 2.747991] raid6: .... xor() 39136 MB/s, rmw enabled <6>[ 2.748999] raid6: using avx2x2 recovery algorithm <6>[ 2.750278] ACPI: Added _OSI(Module Device) <6>[ 2.750998] ACPI: Added _OSI(Processor Device) <6>[ 2.751998] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.752998] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.130889] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.141384] ACPI: EC: EC started <6>[ 3.141992] ACPI: EC: interrupt blocked <6>[ 3.147146] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.148000] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.406684] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 4.961188] ACPI: Interpreter enabled <6>[ 4.962113] ACPI: PM: (supports S0 S4 S5) <6>[ 4.963001] ACPI: Using IOAPIC for interrupt routing <6>[ 4.964144] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 4.994756] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 4.995018] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 4.996004] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.021142] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.021991] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.065279] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.184279] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.191117] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.208378] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.215704] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.228497] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.234386] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.240998] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.247637] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.308928] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.309278] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.310268] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.599059] ACPI: \_TZ_.FN00: New power resource <6>[ 5.600520] ACPI: \_TZ_.FN01: New power resource <6>[ 5.601532] ACPI: \_TZ_.FN02: New power resource <6>[ 5.602507] ACPI: \_TZ_.FN03: New power resource <6>[ 5.603516] ACPI: \_TZ_.FN04: New power resource <6>[ 5.607698] ACPI: \PIN_: New power resource <6>[ 5.610420] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.611010] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.615191] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.622169] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.631152] PCI host bridge to bus 0000:00 <6>[ 5.632001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.633002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.634002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.635003] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.636004] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.637005] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.646489] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.647531] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.648014] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.649011] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.650044] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.651003] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 5.652047] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 5.654058] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 5.655017] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 5.657089] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 5.658009] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 5.659019] pci 0000:00:05.0: enabling Extended Tags <6>[ 5.660747] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 5.661137] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 5.665922] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 5.666234] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 5.670547] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 5.671224] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 5.675544] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 5.676017] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 5.677374] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 5.678008] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 5.679020] pci 0000:00:0a.0: enabling Extended Tags <6>[ 5.680189] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 5.681010] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 5.682015] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 5.683389] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 5.684017] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 5.685077] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 5.687434] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 5.688018] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 5.689012] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 5.690060] pci 0000:00:0d.3: supports D1 D2 <6>[ 5.690998] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.693109] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 5.694014] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 5.695065] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 5.698173] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 5.699015] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 5.700081] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 5.702677] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 5.703017] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 5.704012] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 5.705302] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 5.706049] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.708296] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 5.709051] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.711293] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 5.712049] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.714277] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 5.715047] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.717263] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 5.718023] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.719092] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.722133] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 5.723011] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 5.724005] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 5.725310] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 5.726049] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.727611] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 5.728051] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.730267] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 5.732236] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 5.733044] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.734056] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.735119] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.736360] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 5.737022] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.738026] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 5.740021] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 5.741034] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 5.742290] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 5.743026] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 5.744148] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.746164] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 5.747052] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 5.748799] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.749007] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 5.750141] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.751023] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.752024] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 5.753133] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 5.754022] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.755024] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 5.756038] pci_bus 0000:00: on NUMA node 0 <6>[ 8.680992] Low-power S0 idle used by default for system suspend <6>[ 9.058273] ACPI: EC: interrupt unblocked <6>[ 9.058992] ACPI: EC: event unblocked <6>[ 9.059991] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.061000] ACPI: EC: GPE=0x6e <6>[ 9.061999] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.063007] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.064404] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.065440] SCSI subsystem initialized <7>[ 9.066048] libata version 3.00 loaded. <6>[ 9.066123] ACPI: bus type USB registered <6>[ 9.067051] usbcore: registered new interface driver usbfs <6>[ 9.068028] usbcore: registered new interface driver hub <6>[ 9.069049] usbcore: registered new device driver usb <6>[ 9.070207] efivars: Registered efivars operations <6>[ 9.071104] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.072520] PCI: Using ACPI for IRQ routing <7>[ 9.091467] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.091619] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.092157] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.092166] e820: reserve RAM buffer [mem 0x67fa0000-0x67ffffff] <7>[ 9.092169] e820: reserve RAM buffer [mem 0x67fbe000-0x67ffffff] <7>[ 9.092172] e820: reserve RAM buffer [mem 0x6ca3d000-0x6fffffff] <7>[ 9.092175] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.092266] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.092991] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.092991] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.093001] vgaarb: loaded <6>[ 9.094161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.095001] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.098120] clocksource: Switched to clocksource tsc-early <6>[ 9.104179] pnp: PnP ACPI init <6>[ 9.108053] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.113929] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.120304] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.127483] system 00:03: [io 0x06a4] has been reserved <6>[ 9.132749] system 00:03: [io 0x06a0] has been reserved <6>[ 9.156592] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.163151] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.170048] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.176945] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.183504] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.190402] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.197297] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.204198] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.215376] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.222317] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.232496] pnp: PnP ACPI: found 8 devices <6>[ 9.246691] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 9.255682] NET: Registered PF_INET protocol family <6>[ 9.260798] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.270351] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 9.279292] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 9.286970] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.295190] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 9.305327] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 9.312188] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.319706] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.327662] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 9.333301] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 9.341661] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 9.350029] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 9.356065] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 9.362104] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 9.369734] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 9.377373] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 9.384990] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 9.392608] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 9.400231] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 9.407848] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 9.414597] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 9.419523] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 9.426246] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 9.431446] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 9.437509] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 9.444254] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.452280] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 9.457482] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 9.463538] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 9.470279] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.478307] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 9.484432] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 9.490551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 9.497358] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 9.504172] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 9.511410] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 9.517615] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 9.523133] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 9.529340] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.536835] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 9.542354] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 9.548560] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.557055] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 9.564272] PCI: CLS 0 bytes, default 64 <6>[ 9.568234] DMAR: No RMRR found <6>[ 9.571369] DMAR: No ATSR found <6>[ 9.574491] DMAR: IOMMU feature nest inconsistent <6>[ 9.574493] DMAR: IOMMU feature sc_support inconsistent <6>[ 9.579165] DMAR: dmar0: Using Queued invalidation <6>[ 9.589107] DMAR: dmar1: Using Queued invalidation <6>[ 9.594839] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 9.600181] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 9.605237] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 9.610285] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 9.615340] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 9.620412] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 9.625488] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 9.630538] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 9.635585] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 9.640638] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 9.645710] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 9.650836] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 9.655979] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 9.661137] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 9.666263] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 9.671449] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 9.676586] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 9.681720] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 9.686848] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 9.692003] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 9.697134] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 9.702292] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 9.707421] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 9.712610] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 9.717741] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 9.722868] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 9.728002] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 9.733133] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 9.738275] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 9.744288] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 9.750681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 9.757058] software IO TLB: mapped [mem 0x00000000635bd000-0x00000000675bd000] (64MB) <6>[ 9.765227] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 9.773067] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 9.778757] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 9.784367] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 9.789974] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 9.797259] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 9.807210] clocksource: Switched to clocksource tsc <6>[ 9.812214] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 9.830140] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 9.838748] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 9.846509] NET: Registered PF_ALG protocol family <6>[ 9.851273] xor: measuring software checksum speed <6>[ 9.856247] prefetch64-sse : 43953 MB/sec <6>[ 9.860806] generic_sse : 42384 MB/sec <6>[ 9.865131] xor: using function: prefetch64-sse (43953 MB/sec) <6>[ 9.870953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 9.878281] io scheduler mq-deadline registered <6>[ 9.882778] io scheduler kyber registered <6>[ 9.888191] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 9.895019] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 9.900917] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.915757] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 9.921658] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.935648] efifb: probing for efifb <6>[ 9.939229] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 9.946041] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 9.952171] efifb: scrolling: redraw <6>[ 9.955724] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 9.965372] Console: switching to colour frame buffer device 360x112 <6>[ 9.975703] fb0: EFI VGA frame buffer device <6>[ 9.980636] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 9.985511] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 9.997546] ACPI: button: Lid Switch [LID0] <6>[ 10.001874] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.010254] ACPI: button: Sleep Button [SLPB] <6>[ 10.014706] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.023532] ACPI: button: Power Button [PWRB] <6>[ 10.094331] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.099992] ACPI: thermal: Thermal Zone [TZ00] (37 C) <6>[ 10.105597] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.106482] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.117215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.117588] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.131030] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.138337] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.145417] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.154300] Non-volatile memory driver v1.3 <6>[ 10.158584] Linux agpgart interface v0.103 <4>[ 10.188393] tpm_crb: probe of INTC7001:00 failed with error 378 <6>[ 10.194368] ACPI: bus type drm_connector registered <6>[ 10.209017] loop: module loaded <6>[ 10.212851] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 10.213420] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.219470] nvme nvme0: pci function 0000:01:00.0 <6>[ 10.224474] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 10.237622] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.247345] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.252542] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 10.259881] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.267073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.275281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.278810] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 10.282428] usb usb1: Product: xHCI Host Controller <6>[ 10.292924] usb usb1: Manufacturer: Linux 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ xhci-hcd <6>[ 10.301123] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 10.306243] hub 1-0:1.0: USB hub found <6>[ 10.310024] hub 1-0:1.0: 1 port detected <6>[ 10.316290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.324493] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.331661] usb usb2: Product: xHCI Host Controller <6>[ 10.336663] usb usb2: Manufacturer: Linux 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ xhci-hcd <6>[ 10.344943] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 10.349904] hub 2-0:1.0: USB hub found <6>[ 10.353715] hub 2-0:1.0: 4 ports detected <6>[ 10.375090] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.380310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 10.388828] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.398558] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.403755] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 10.411162] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.418330] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.426569] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.433779] usb usb3: Product: xHCI Host Controller <6>[ 10.438628] usb usb3: Manufacturer: Linux 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ xhci-hcd <6>[ 10.446884] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 10.451878] hub 3-0:1.0: USB hub found <6>[ 10.455706] hub 3-0:1.0: 12 ports detected <6>[ 10.477261] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 10.481056] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.490645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.497808] usb usb4: Product: xHCI Host Controller <6>[ 10.502851] usb usb4: Manufacturer: Linux 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ xhci-hcd <6>[ 10.503263] nvme0n1: p1 p2 <6>[ 10.511226] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 10.518914] hub 4-0:1.0: USB hub found <6>[ 10.522734] hub 4-0:1.0: 2 ports detected <6>[ 10.529838] usbcore: registered new interface driver usb-storage <6>[ 10.535999] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 10.542944] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 11.255464] i8042: Can't read CTR while initializing i8042 <4>[ 11.260935] i8042: probe of i8042 failed with error -5 <6>[ 11.266183] mousedev: PS/2 mouse device common for all mice <6>[ 11.272132] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 11.278117] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 11.282960] rtc_cmos rtc_cmos: setting system clock to 1998-03-01T22:42:53 UTC (888792173) <6>[ 11.291241] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 11.298210] IR JVC protocol handler initialized <6>[ 11.302715] IR MCE Keyboard/mouse protocol handler initialized <6>[ 11.308506] IR NEC protocol handler initialized <6>[ 11.313006] IR RC5(x/sz) protocol handler initialized <6>[ 11.318023] IR RC6 protocol handler initialized <6>[ 11.323302] IR SANYO protocol handler initialized <6>[ 11.328858] IR Sharp protocol handler initialized <6>[ 11.334388] IR Sony protocol handler initialized <6>[ 11.339847] IR XMP protocol handler initialized <6>[ 11.346377] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 11.355525] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 11.363748] device-mapper: uevent: version 1.0.3 <6>[ 11.369401] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 11.378554] intel_pstate: Intel P-state driver initializing <6>[ 11.388815] intel_pstate: HWP enabled <6>[ 11.394900] sdhci: Secure Digital Host Controller Interface driver <6>[ 11.403743] sdhci: Copyright(c) Pierre Ossman <6>[ 11.420759] pstore: Registered efi_pstore as persistent store backend <6>[ 11.430068] hid: raw HID events driver (C) Jiri Kosina <6>[ 11.439589] usbcore: registered new interface driver usbhid <6>[ 11.448142] usbhid: USB HID core driver <6>[ 11.455214] pci 0000:00:08.0: Setting to D3hot <6>[ 11.474246] pci 0000:00:05.0: Setting to D3hot <6>[ 11.475013] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 11.490884] pci 0000:00:0b.0: Setting to D3hot <6>[ 11.508138] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 11.512934] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 11.516385] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 11.522598] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 11.529196] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 11.538094] intel_pmc_core INT33A1:00: initialized <6>[ 11.542188] usb 4-1: Manufacturer: Realtek <6>[ 11.548375] intel_rapl_msr: PL4 support detected. <6>[ 11.551225] usb 4-1: SerialNumber: 000001 <6>[ 11.556831] intel_rapl_common: Found RAPL domain package <6>[ 11.611295] intel_rapl_common: Found RAPL domain core <6>[ 11.619902] intel_rapl_common: Found RAPL domain uncore <6>[ 11.628592] intel_rapl_common: Found RAPL domain psys <6>[ 11.644562] Initializing XFRM netlink socket <6>[ 11.654403] NET: Registered PF_INET6 protocol family <6>[ 11.672238] Segment Routing with IPv6 <6>[ 11.680810] In-situ OAM (IOAM) with IPv6 <6>[ 11.689612] mip6: Mobile IPv6 <6>[ 11.697115] NET: Registered PF_PACKET protocol family <6>[ 11.706943] NET: Registered PF_KEY protocol family <6>[ 11.762200] IPI shorthand broadcast: enabled <6>[ 11.771211] AVX2 version of gcm_enc/dec engaged. <6>[ 11.781003] AES CTR mode by8 optimization enabled <6>[ 11.873171] sched_clock: Marking stable (10260014503, 1612451489)->(13086885809, -1214419817) <6>[ 11.888178] registered taskstats version 1 <6>[ 12.001677] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.035741] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.045570] pstore: Using crash dump compression: deflate <6>[ 12.073100] clk: Disabling unused clocks <6>[ 12.082227] ALSA device list: <6>[ 12.090206] No soundcards found. <6>[ 12.100757] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.785779] EXT4-fs (nvme0n1p2): mounted filesystem 014837a2-534c-4da2-825c-eb72347fbe34 ro with ordered data mode. Quota mode: disabled. <6>[ 12.803506] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.818756] devtmpfs: mounted <6>[ 12.829909] Freeing unused kernel image (initmem) memory: 2564K <6>[ 12.840808] Write protecting the kernel read-only data: 22528k <6>[ 12.853235] Freeing unused kernel image (rodata/data gap) memory: 700K <6>[ 12.864541] Run /sbin/init as init process <7>[ 12.873299] with arguments: <7>[ 12.873319] /sbin/init <7>[ 12.873336] 3 <7>[ 12.873346] with environment: <7>[ 12.873356] HOME=/ <7>[ 12.873365] TERM=linux <7>[ 12.873374] BOOT_IMAGE=/boot/drm_intel <7>[ 13.153772] systemd[1]: System time before build time, advancing clock. <7>[ 13.495984] systemd[1]: systemd 245.4-4ubuntu3.19 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 13.528127] systemd[1]: Detected architecture x86-64. <7>[ 13.567981] systemd[1]: Set hostname to . <6>[ 13.793068] cat (187) used greatest stack depth: 13064 bytes left <6>[ 13.802777] friendly-recove (184) used greatest stack depth: 12632 bytes left <6>[ 13.843509] netplan (185) used greatest stack depth: 12584 bytes left <6>[ 13.870635] systemd-cryptse (189) used greatest stack depth: 12568 bytes left <6>[ 13.880514] systemd-debug-g (191) used greatest stack depth: 12536 bytes left <6>[ 14.233382] (sd-executor) (183) used greatest stack depth: 12280 bytes left <7>[ 14.764267] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 14.782535] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 14.807606] systemd[1]: Created slice system-modprobe.slice. <7>[ 14.832739] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 14.857826] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 14.882588] systemd[1]: Created slice User and Session Slice. <7>[ 14.904235] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 14.927128] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 14.944138] systemd[1]: Reached target Remote File Systems. <7>[ 14.963858] systemd[1]: Reached target Slices. <7>[ 14.982560] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.010220] systemd[1]: Listening on Syslog Socket. <7>[ 15.029552] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.052847] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 15.113648] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 15.128773] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.151041] systemd[1]: Listening on Journal Socket. <7>[ 15.170859] systemd[1]: Listening on udev Control Socket. <7>[ 15.192030] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.244807] systemd[1]: Mounting Huge Pages File System... <7>[ 15.301780] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 15.351432] systemd[1]: Mounting Kernel Debug File System... <7>[ 15.406105] systemd[1]: Mounting Kernel Trace File System... <7>[ 15.461341] systemd[1]: Starting Journal Service... <7>[ 15.513611] systemd[1]: Starting Set the console keyboard layout... <7>[ 15.563020] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 15.586347] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 15.600681] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 15.649683] systemd[1]: Starting File System Check on Root Device... <7>[ 15.695309] systemd[1]: Starting Load Kernel Modules... <7>[ 15.721556] systemd[1]: Starting udev Coldplug all Devices... <7>[ 15.747374] systemd[1]: Starting Uncomplicated firewall... <7>[ 15.766600] systemd[1]: Started Journal Service. <6>[ 16.897291] EXT4-fs (nvme0n1p2): re-mounted 014837a2-534c-4da2-825c-eb72347fbe34 r/w. Quota mode: disabled. <6>[ 17.014278] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 17.092031] systemd-journald[212]: Received client request to flush runtime journal. <5>[ 17.105436] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 18.372162] pps_core: LinuxPPS API ver. 1 registered <6>[ 18.372177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 18.376515] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 18.397426] PTP clock support registered <6>[ 18.411814] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 18.412009] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 18.694156] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 18.694172] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 18.723870] usbcore: registered new device driver r8152-cfgselector <6>[ 18.729644] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 18.729653] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 18.737286] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 18.767247] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 18.767629] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 18.871589] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 18.920019] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 18.939163] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 18.939723] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 18.976982] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 18.977391] usbcore: registered new interface driver r8152 <6>[ 18.989315] usbcore: registered new interface driver cdc_ether <6>[ 18.995071] usbcore: registered new interface driver r8153_ecm <6>[ 19.010248] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 19.010435] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 19.010641] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 19.031207] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 19.245076] r8152 4-1:1.0 enxe2015072f13a: renamed from eth0 <6>[ 19.446060] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 19.624127] ********************************************************** <4>[ 19.624134] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.624139] ** ** <4>[ 19.624144] ** trace_printk() being used. Allocating extra memory. ** <4>[ 19.624150] ** ** <4>[ 19.624155] ** This means that this is a DEBUG kernel and it is ** <4>[ 19.624160] ** unsafe for production use. ** <4>[ 19.624164] ** ** <4>[ 19.624169] ** If you see this message and you are not debugging ** <4>[ 19.624174] ** the kernel, report this immediately to your vendor! ** <4>[ 19.624179] ** ** <4>[ 19.624184] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.624189] ********************************************************** <6>[ 19.810401] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 19.814170] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.814948] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 19.815614] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 19.815680] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 19.816238] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 19.816849] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 19.817405] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 19.818001] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 19.818963] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 19.819598] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 19.820968] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 19.821491] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 19.823054] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 19.823526] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 19.823851] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 19.826636] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 19.827548] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 19.828265] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 19.828943] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 19.834361] Console: switching to colour dummy device 80x25 <6>[ 19.838959] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 19.844026] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 19.844856] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 19.844900] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 19.845560] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 19.846096] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 19.846509] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 19.847930] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe08018 <7>[ 19.848618] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 19.849096] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 19.849515] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 19.849886] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 19.850235] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 19.850639] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 19.850995] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 19.851391] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 19.851775] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 19.852329] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 19.852824] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 19.853277] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 19.853726] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.854137] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.854549] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 19.854987] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.855374] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.855809] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 19.856203] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.856621] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.857023] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 19.857427] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.857834] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.858216] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 19.858606] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.858990] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.859370] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 19.859765] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 19.860135] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 19.861983] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 19.862514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 19.862956] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 19.863369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 19.863799] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 19.864189] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 19.864588] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 19.864971] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 19.865336] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 19.865748] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 19.866139] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 19.866549] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 19.866941] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 19.867339] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 19.867754] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 19.868137] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 19.868534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 19.868915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 19.869294] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 19.869711] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 19.870111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.870544] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 19.870947] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.871327] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 19.871742] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 19.872123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.872541] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 19.872919] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.873292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 19.873671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.874045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 19.874403] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 19.874786] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 19.875159] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.875545] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 19.875924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 19.876292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 19.876696] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 19.877262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.877981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 19.878632] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.879426] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 19.880101] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 19.880726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 19.881202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 19.881649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 19.882140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 19.882604] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 19.882716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 19.883236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 19.883721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 19.884144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 19.884760] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 19.901109] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 19.903204] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 19.903867] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 19.904357] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 19.904793] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 19.905175] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 19.905548] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 19.905909] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 19.907040] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 19.957435] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 19.964911] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 19.967723] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 19.968382] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 19.969060] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 19.969663] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 19.970371] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 19.970992] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 19.971484] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 19.971944] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 19.972359] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 19.972776] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 19.973191] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 19.973606] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 19.973992] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 19.974581] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 19.975232] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 19.975705] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 19.976099] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 19.976451] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 19.976805] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 19.977276] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 19.977975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 19.980152] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 19.980954] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 19.983980] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 19.984892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 19.999649] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 20.014240] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 20.016475] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 20.020589] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 20.021178] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 20.047388] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 20.047448] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 20.047492] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 20.047652] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.049109] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 20.050916] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 20.051644] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 20.052251] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 20.052858] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.053313] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.053720] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.054734] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.055186] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.055731] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.057422] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 20.058111] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.059324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.059811] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 20.060545] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 20.061670] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.062417] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.063448] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 20.064108] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 20.065328] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 20.065952] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.066402] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 20.067033] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 20.067663] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.068310] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.069413] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 20.070013] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.070632] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.072654] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 20.073544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 20.074259] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 20.079707] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 20.080335] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 20.080933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 20.081411] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 20.081858] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 20.082258] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 20.082665] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 20.083045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 20.083420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 20.083815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 20.084180] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 20.084564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 20.084927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 20.085286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 20.085680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 20.086044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 20.086413] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 20.086797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 20.087152] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 20.087527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 20.087881] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 20.088230] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 20.088601] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 20.088947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 20.089295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 20.090691] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 20.091629] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 20.092211] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 20.092739] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 20.093114] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 20.093626] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 20.094089] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 20.094452] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 20.094817] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 20.095202] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 20.095760] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 20.096304] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 20.096852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 20.097273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.097894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.098308] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.098710] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.099161] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 20.099644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 20.100035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.100399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.100771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.101119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.102915] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 20.103539] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 20.104078] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 20.104544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 20.104970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.105357] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.105751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.106113] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.106517] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 20.106923] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 20.107289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.107973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.108431] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.108870] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.109683] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 20.110208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 20.110678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 20.111092] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 20.111525] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 20.111914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 20.112306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 20.113112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 20.113643] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 20.114040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 20.114398] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 20.114775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 20.115126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 20.115491] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 20.116010] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 20.116482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 20.116883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 20.117247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 20.117671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 20.118039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 20.118385] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 20.118908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 20.119332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 20.119734] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 20.120097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 20.120446] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 20.120815] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 20.121159] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 20.121661] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 20.122097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 20.122499] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 20.122864] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 20.123211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 20.123567] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 20.123906] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 20.125166] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 20.125798] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.126268] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 20.126718] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.127139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.127566] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.127978] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.128365] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 20.128941] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.129374] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.129815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 20.130207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.130615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.130996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.131375] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.131775] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.132152] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.132538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.132914] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.133285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.133670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.134043] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.134413] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 20.134915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 20.135357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.135781] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.136162] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.136549] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.136925] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.137290] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.137669] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.138033] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.138391] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.138760] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.139120] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.139497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 20.139862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 20.140216] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 20.140914] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 20.141405] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.141850] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.142247] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.143919] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 20.144524] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 20.157486] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 20.176317] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 20.177408] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 20.177957] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 20.178539] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 20.178550] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 20.178557] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 20.178591] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 20.181933] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 20.182567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 20.183034] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 20.186660] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 20.187260] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 20.188692] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 20.189176] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 20.193161] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.193869] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 20.194437] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 20.209748] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 20.262407] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 20.263110] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 20.263628] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 20.264060] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 20.264450] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 20.264861] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 20.265238] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 20.265638] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 20.265999] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 20.266347] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 20.266716] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 20.267061] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 20.267401] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 20.267763] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 20.269740] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 20.282293] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.284582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 20.287540] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 20.287562] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 20.288491] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 20.308075] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 20.308125] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 20.309754] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 20.310290] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 20.311711] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 20.312191] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 20.313597] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 20.314057] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 20.318040] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.318736] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 20.319290] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 20.381913] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 20.382598] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 20.383080] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 20.383534] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 20.383936] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 20.384314] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 20.384713] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 20.385081] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 20.385435] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 20.385815] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 20.386166] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 20.386537] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 20.386886] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 20.387238] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 20.387620] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 20.389844] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 20.389870] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 20.407770] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.408619] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 20.417201] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 20.418337] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 20.418352] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 20.418739] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 20.426435] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.427764] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.428518] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.429197] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 20.429853] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 20.430319] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 20.430754] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 20.431151] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 20.431551] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 20.432070] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 20.432550] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 20.433052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 20.433527] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 20.433958] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 20.434503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 20.435015] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 20.435618] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 20.436047] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 20.436442] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.436857] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.437230] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.437616] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.437964] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.438297] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.438664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.439006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.439337] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.439691] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.440024] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.440351] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.440701] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.441034] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.441365] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.441719] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.442053] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.442380] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.442731] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.443065] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.443391] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.443746] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.444079] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.444406] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 20.444894] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 20.444915] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 20.445486] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.445965] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 20.446384] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.446819] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.447218] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.447625] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.448006] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 20.448383] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.448796] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.449187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 20.449590] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 20.449601] i915 0000:00:02.0: pixelformat: RGB <7>[ 20.449611] i915 0000:00:02.0: colorimetry: sRGB <7>[ 20.449620] i915 0000:00:02.0: bpc: 0 <7>[ 20.449629] i915 0000:00:02.0: dynamic range: VESA range <7>[ 20.449640] i915 0000:00:02.0: content type: Not defined <7>[ 20.449650] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.450047] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.450436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.450859] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.451252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.451687] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.452098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.452520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.452901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.453270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.453667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.454035] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 20.454553] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 20.455009] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.455414] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.455828] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.456227] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.456631] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.457016] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.457381] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.457816] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.458194] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.458586] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.458965] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.459337] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 20.459735] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 20.460107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 20.460501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 20.460878] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 20.461242] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 20.463423] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 20.537078] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 20.672612] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 20.673926] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 20.681774] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 20.682282] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 20.682691] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 20.732893] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 20.733943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 20.735316] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 20.735975] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 20.736497] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 20.736917] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 20.737292] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 20.737670] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 20.738028] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 20.738374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.738743] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 20.739089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 20.739432] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 20.739791] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 20.740129] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.740493] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.740837] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 20.741171] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 20.741532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 20.741877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 20.742220] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.742609] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 20.743024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 20.743442] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 20.743894] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 20.744304] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.745010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.746982] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 20.747715] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 20.748217] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 21.360799] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 21.361532] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.361988] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 21.362445] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 21.563204] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.565774] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.566389] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 21.569697] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.570549] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 21.572236] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 21.573996] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 21.574907] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 21.576912] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 21.577287] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 21.580191] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 21.580583] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 21.581716] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 21.582750] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 21.583243] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 21.583775] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 21.593719] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.595160] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.595846] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 21.597908] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 21.598451] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 21.598894] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 21.599295] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.599667] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.600016] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 21.600352] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.600704] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.601035] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 21.601357] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 21.601743] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.602130] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 21.603253] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 21.605992] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 21.606752] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 21.607195] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 21.607595] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 21.608027] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 21.608494] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 21.611889] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 21.612598] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 21.612976] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 21.613290] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 21.613611] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 21.613964] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 21.640966] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 21.642201] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 21.646428] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 21.647841] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 21.650287] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 21.651435] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 21.652505] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 21.655924] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 21.657111] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 21.658119] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 21.660641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 21.661801] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 21.664240] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 21.664422] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 21.671708] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 21.715925] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 21.727540] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 21.735175] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 21.736154] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 21.736872] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 21.738969] [drm:drm_client_modeset_probe] <7>[ 21.739938] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 21.740701] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 21.740718] i915 device info: graphics version: 12.71 <7>[ 21.740726] i915 device info: media version: 13 <7>[ 21.740735] i915 device info: display version: 14 <7>[ 21.740743] i915 device info: graphics stepping: B0 <7>[ 21.740750] i915 device info: media stepping: C0 <7>[ 21.740756] i915 device info: display stepping: C0 <7>[ 21.740762] i915 device info: base die stepping: ** <7>[ 21.740769] i915 device info: gt: 0 <7>[ 21.740775] i915 device info: memory-regions: 0x41 <7>[ 21.740783] i915 device info: page-sizes: 0x211000 <7>[ 21.740789] i915 device info: platform: METEORLAKE <7>[ 21.740796] i915 device info: ppgtt-size: 48 <7>[ 21.740802] i915 device info: ppgtt-type: 2 <7>[ 21.740808] i915 device info: dma_mask_size: 46 <7>[ 21.740814] i915 device info: is_mobile: no <7>[ 21.740821] i915 device info: is_lp: no <7>[ 21.740827] i915 device info: require_force_probe: yes <7>[ 21.740833] i915 device info: is_dgfx: no <7>[ 21.740839] i915 device info: has_64bit_reloc: yes <7>[ 21.740845] i915 device info: has_64k_pages: no <7>[ 21.740851] i915 device info: gpu_reset_clobbers_display: no <7>[ 21.740857] i915 device info: has_reset_engine: yes <7>[ 21.740863] i915 device info: has_3d_pipeline: yes <7>[ 21.740869] i915 device info: has_4tile: yes <7>[ 21.740875] i915 device info: has_flat_ccs: no <7>[ 21.740881] i915 device info: has_global_mocs: yes <7>[ 21.740889] i915 device info: has_gmd_id: yes <7>[ 21.740897] i915 device info: has_gt_uc: yes <7>[ 21.740904] i915 device info: has_heci_pxp: no <7>[ 21.740912] i915 device info: has_heci_gscfi: no <7>[ 21.740918] i915 device info: has_guc_deprivilege: yes <7>[ 21.740924] i915 device info: has_l3_ccs_read: no <7>[ 21.740930] i915 device info: has_l3_dpf: no <7>[ 21.740936] i915 device info: has_llc: no <7>[ 21.740942] i915 device info: has_logical_ring_contexts: yes <7>[ 21.740948] i915 device info: has_logical_ring_elsq: yes <7>[ 21.740954] i915 device info: has_media_ratio_mode: no <7>[ 21.740960] i915 device info: has_mslice_steering: no <7>[ 21.740966] i915 device info: has_oa_bpc_reporting: yes <7>[ 21.740972] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 21.740978] i915 device info: has_oam: yes <7>[ 21.740985] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 21.740990] i915 device info: has_pxp: yes <7>[ 21.740996] i915 device info: has_rc6: yes <7>[ 21.741002] i915 device info: has_rc6p: no <7>[ 21.741008] i915 device info: has_rps: yes <7>[ 21.741013] i915 device info: has_runtime_pm: yes <7>[ 21.741019] i915 device info: has_snoop: yes <7>[ 21.741024] i915 device info: has_coherent_ggtt: no <7>[ 21.741031] i915 device info: tuning_thread_rr_after_dep: no <7>[ 21.741037] i915 device info: unfenced_needs_alignment: no <7>[ 21.741043] i915 device info: hws_needs_physical: no <7>[ 21.740971] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 21.741053] i915 device info: has_pooled_eu: no <7>[ 21.741058] i915 device info: cursor_needs_physical: no <7>[ 21.741063] i915 device info: has_cdclk_crawl: yes <7>[ 21.741067] i915 device info: has_cdclk_squash: yes <7>[ 21.741071] i915 device info: has_ddi: yes <7>[ 21.741076] i915 device info: has_dp_mst: yes <7>[ 21.741080] i915 device info: has_dsb: yes <7>[ 21.741084] i915 device info: has_fpga_dbg: yes <7>[ 21.741089] i915 device info: has_gmch: no <7>[ 21.741092] i915 device info: has_hotplug: yes <7>[ 21.741097] i915 device info: has_hti: no <7>[ 21.741101] i915 device info: has_ipc: yes <7>[ 21.741139] i915 device info: has_overlay: no <7>[ 21.741148] i915 device info: has_psr: yes <7>[ 21.741156] i915 device info: has_psr_hw_tracking: no <7>[ 21.741162] i915 device info: overlay_needs_physical: no <7>[ 21.741169] i915 device info: supports_tv: no <7>[ 21.741175] i915 device info: has_hdcp: yes <7>[ 21.741181] i915 device info: has_dmc: yes <7>[ 21.741188] i915 device info: has_dsc: yes <7>[ 21.741194] i915 device info: rawclk rate: 38400 kHz <7>[ 21.741202] i915 device info: iommu: enabled <7>[ 21.741210] i915 device info: available engines: 400003 <7>[ 21.741219] i915 device info: subslice total: 8 <7>[ 21.741225] i915 device info: geometry dss mask=00000000,000000ff <7>[ 21.741233] i915 device info: compute dss mask=00000000,000000ff <7>[ 21.741240] i915 device info: EU total: 128 <7>[ 21.741246] i915 device info: EU per subslice: 16 <7>[ 21.741252] i915 device info: has slice power gating: no <7>[ 21.741257] i915 device info: has subslice power gating: no <7>[ 21.741263] i915 device info: has EU power gating: no <7>[ 21.741270] i915 device info: available engines: 41400 <7>[ 21.741276] i915 device info: subslice total: 8 <7>[ 21.741282] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 21.741288] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 21.741294] i915 device info: EU total: 128 <7>[ 21.741300] i915 device info: EU per subslice: 16 <7>[ 21.741306] i915 device info: has slice power gating: no <7>[ 21.741311] i915 device info: has subslice power gating: no <7>[ 21.741317] i915 device info: has EU power gating: no <6>[ 21.741327] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 21.741334] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 21.741340] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 21.741246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.746003] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.746653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 21.748050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 21.748650] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 21.749057] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 21.749435] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 21.750018] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.750054] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.750071] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.750196] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 21.750971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 21.753445] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.753924] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 21.755285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 21.756283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 21.757182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 21.758682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 21.762621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 21.766692] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 21.766817] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.766870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 21.766977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 21.769208] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 21.769358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 21.769570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.769703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.771263] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 21.771403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 21.771622] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 21.771727] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 21.773627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 21.773770] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 21.773893] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.773986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.775632] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 21.775764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 21.775880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 21.775968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 21.777557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 21.777685] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 21.777800] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 21.777891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 21.779322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 21.779449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 21.779671] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 21.779709] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 21.779733] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 21.779756] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 21.779781] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 21.779803] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 21.779826] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 21.780358] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 21.780554] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 21.780590] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 21.780623] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 21.780657] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 21.780738] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 21.781142] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 21.781441] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 21.802769] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 21.807648] fbcon: i915drmfb (fb0) is primary device <7>[ 21.812714] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 21.814036] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 21.815136] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 21.816146] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 21.817207] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 21.818556] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 21.820179] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 21.822054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 21.823391] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 21.824372] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 21.825390] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 21.826231] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 21.826981] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 21.827805] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 21.828582] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 21.829279] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 21.830115] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 21.831507] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 21.832365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 21.833284] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.834061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 21.834758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.835396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.836186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.836860] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.837602] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 21.838346] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.839175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.840081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 21.841036] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 21.841049] i915 0000:00:02.0: pixelformat: RGB <7>[ 21.841058] i915 0000:00:02.0: colorimetry: sRGB <7>[ 21.841065] i915 0000:00:02.0: bpc: 0 <7>[ 21.841073] i915 0000:00:02.0: dynamic range: VESA range <7>[ 21.841080] i915 0000:00:02.0: content type: Not defined <7>[ 21.841088] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.842028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.842912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.843673] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.844534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.845252] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.846054] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.846950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.847733] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.848606] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.849440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.850350] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 21.851436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 21.852511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.853407] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.854279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.855201] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.856136] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.857050] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.857889] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.858687] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.859556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.860296] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.861041] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.861794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 21.862549] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 21.863381] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 21.864159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 21.864952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 21.865847] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 21.866886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 21.867794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 21.871060] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 21.872729] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 21.873790] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 21.874796] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 21.875731] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 21.876509] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 21.877145] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 21.877814] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.878417] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 21.879061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 21.879675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 21.880230] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 21.880978] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.881821] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.882557] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 21.883205] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 21.883963] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 21.884990] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 21.886118] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.887154] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 21.888048] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <6>[ 21.888884] r8152 4-1:1.0 enxe2015072f13a: carrier on <7>[ 21.889007] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 21.890035] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 21.893942] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 21.902376] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.902992] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 21.904829] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 21.905503] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 21.906107] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 21.907006] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.907818] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.908805] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 21.909767] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.910821] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.912062] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 21.913221] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 21.914437] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 21.920849] Console: switching to colour frame buffer device 360x112 <6>[ 21.945863] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 21.958955] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 21.959104] [drm:drm_client_modeset_probe] <7>[ 21.959968] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 21.960074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.962970] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.963571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 21.963788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 21.964518] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 21.965287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 21.965857] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 21.966318] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 21.966829] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 21.967643] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.967672] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.967690] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.967769] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 21.968180] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 21.969790] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.970126] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 21.971552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 21.971623] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.971637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 21.971685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 21.972552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 21.972591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.972620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 21.973108] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 21.973157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 21.973201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 21.974052] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 21.974090] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.974125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 21.974615] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 21.974647] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 21.974676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 21.975079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 21.975107] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 21.975133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 21.975531] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 21.975560] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 21.975568] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 21.975572] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 21.975576] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 21.975579] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 21.975583] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 21.975586] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 21.975768] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 21.975810] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 21.975817] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 21.975821] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 21.975825] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 21.975895] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 21.994708] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 21.994846] [drm:drm_client_modeset_probe] <7>[ 21.994971] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 21.995028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.997019] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.997493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 21.998689] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 21.998996] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 21.999287] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 21.999791] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.000332] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.000350] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.000362] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.000415] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.000983] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.002746] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.003168] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.004637] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.004670] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.004682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.004713] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.005077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.005109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.005137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.005557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.005604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.005648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.006270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.006316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.006358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.006906] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.006943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.006977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.007410] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.007440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.007498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.007897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.007925] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.007931] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.007935] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.007939] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.007943] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.007946] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.007950] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.008035] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.008063] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.008069] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.008075] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.008080] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.008123] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.058075] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.059016] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.059855] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.060656] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.061413] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.062232] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.063032] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.063820] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.064572] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.065298] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.066086] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.066845] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.067582] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.068334] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.069257] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.070168] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.070941] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.071685] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.072386] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.073167] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.073925] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.074679] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.075437] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.076388] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.077337] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.078261] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.079175] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.080083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.080996] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.081907] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.082800] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.083544] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.084260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.085025] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.085963] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.086603] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 22.102328] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 22.110437] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 22.113528] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 22.114730] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 22.142008] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 22.142446] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 25.010595] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 25.011923] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 25.156771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 25.158518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.159970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.161170] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 26.322475] systemd-udevd (270) used greatest stack depth: 11832 bytes left <6>[ 26.324818] systemd-udevd (305) used greatest stack depth: 11216 bytes left <7>[ 28.265332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 28.267770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 28.282995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 28.284414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 28.285717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.273697] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=674 'systemd' <5>[ 34.732694] systemd-journald[212]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.806683] systemd-journald[212]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.560891] fuse: init (API version 7.38)