Results for igt@i915_pm_rpm@basic-pci-d3-state

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g74c7773be (x86_64) (Linux: 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest basic-pci-d3-state: SKIP (0.000s)
Err	(i915_pm_rpm:5291) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active Subtest basic-pci-d3-state: SKIP (0.000s)
Dmesg	<6> [80.034115] Console: switching to colour dummy device 80x25 <6> [80.034163] [IGT] i915_pm_rpm: executing <7> [80.041107] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [80.041478] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [80.041497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [80.041621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.042161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.042424] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [80.042533] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [80.042545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [80.042667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.043175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [80.043674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [80.044265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [80.045424] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [80.046482] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [80.047121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [80.047273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [80.047434] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [80.047568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [80.048227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.048444] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [80.048523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [80.048536] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [80.048656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.049830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.049942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [80.050627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.051195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.051203] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [80.051344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [80.078657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.078662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [80.078804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.078976] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [80.082721] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [80.082737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [80.082880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.083378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.083512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [80.083991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [80.084011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [80.084133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.084593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [80.085122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [80.085678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [80.086790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [80.087786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [80.088538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [80.088689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [80.088847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [80.089005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [80.089606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.089797] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [80.090267] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [80.090280] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [80.090400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.091500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.091631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [80.092310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.092878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.092882] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [80.093082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [80.119313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.119318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [80.119430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.119559] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [80.119930] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [80.119943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [80.120093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.120590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.120731] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [80.120766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [80.120795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [80.120956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.121415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [80.121953] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [80.122494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [80.123596] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [80.124673] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [80.125434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [80.125584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [80.125716] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [80.125864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [80.126471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.126604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [80.126630] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [80.126641] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [80.126785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [80.127943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.128082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [80.128794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [80.129282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.129286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [80.129416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [80.156692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [80.156697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [80.156846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [80.157041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [91.200245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.207397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.231944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.241021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.241843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.242798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.243588] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [91.244354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.245109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.245411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.245905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.246441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.247048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.247219] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.247345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.247946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.248369] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.249916] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [91.249942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.252417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.276242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.281245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.281380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.281905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.282436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.283007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.284671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.285796] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.286586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.286896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.287072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.287217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.287824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.288022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.288135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.288285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.288732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.289326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.289482] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.289625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.290299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.290511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.290663] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [91.292803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.317278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.322741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.322925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.323081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.323539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.324126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.324345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.324503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.325121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.325319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.326354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.327805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.352222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.357020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.357175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.358975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.359160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.359941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.360454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.360462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.360634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.385881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.385888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.386045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.386446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.387968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.388049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.390748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.415183] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.419848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.420008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.420501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.420669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.420690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.420864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.421429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.421962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.422501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.423801] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.424809] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.425499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.425679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.425858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.426011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.426616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.426796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.426814] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.426959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.428202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.428339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.429084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.429626] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.429635] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.429803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.453856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.453861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.453986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.454125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.455632] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.455678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.457101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.481449] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.486702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.486865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.487340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.487475] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.487492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.487609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.488121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.488625] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.489213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.490518] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.491633] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.492400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.492553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.492687] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.492841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.493447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.493583] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.493598] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.493716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.494905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.495019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.496247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.496788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.496796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.496950] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.520962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.520968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.521082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.521224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.522254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.522297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.523674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.548056] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.552786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.552897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.553366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.553537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.553557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.553703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.554185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.554700] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.555273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.556506] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.557610] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.558385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.558541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.558673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.558814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.559397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.559536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.559551] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.559674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.560827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.560972] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.561706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.562192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.562197] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.562306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.589594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.589599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.589724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.589886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.591440] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.591485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.592765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.617143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.621833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.621968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.622439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.622585] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.622604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.622731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.623308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.623814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.624364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.625554] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.626500] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.627139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.627292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.627459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.627613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.628237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.628374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.628389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.628508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.629618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.629735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.630453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.630959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.630964] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.631113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.655175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.655180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.655292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.655430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.656917] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.656998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.658393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.682730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.687531] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.687644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.688144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.688323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.688341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.688491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.688967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.689473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.690053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.691290] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.692379] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.693159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.693316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.693450] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.693580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.694171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.694310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.694325] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.694448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.695544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.695707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.696419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.696903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.696925] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.697048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.722726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.722731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.722885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.723072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.724083] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.724174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.725428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.749799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.755162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.755270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.755741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.755920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.755982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.756114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.756579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.757102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.757666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.758795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.759794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.760563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.760719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.760862] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.760991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.761572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.761711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.761727] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.761858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.762964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.763114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.763750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.764272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.764277] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.764389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.787911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.787916] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.788025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.788161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.789179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.789237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.790602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.814971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.820328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.820446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.820930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.821117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.821136] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.821295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.821847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.822312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.822906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.824043] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.825123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.825889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.826041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.826175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.826305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.826907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.827046] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.827061] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.827184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.828295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.828410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.829105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.829582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.829588] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.829700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.854319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.854323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.854434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.854570] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.855587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.855632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.856782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.881140] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.886342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.886460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.886982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.887163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.887182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.887341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.887849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.888357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.888951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.890200] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.891290] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.892049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.892205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.892338] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.892467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.893058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.893197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.893213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.893335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.894403] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.894526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.895227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.895685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.895690] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.895809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.920474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.920478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.920588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.920956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.922487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.922523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.923767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.948161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.952780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.952901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.953376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.953526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.953545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.953675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.954167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.954692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.955242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.956499] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.957592] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.958332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.958484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.958617] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.958746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.959353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.959491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.959507] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.959629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.960703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.960837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.961517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.962036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.962041] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.962152] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.985655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.985660] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.985795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.985967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.986975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.987004] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.988374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.012754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.017573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.017683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.018184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.018346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.018366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.018497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.018977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.019485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.020079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.021220] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.022286] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.023047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.023199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.023333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.023463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.024069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.024241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.024256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.024375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.025535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.025662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.026388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.026876] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.026881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.026990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.053762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.053767] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.053907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.054044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.055542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.055587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.056794] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.081166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.086476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.086594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.087130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.087353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.087372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.087501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.088019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.088479] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.089051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.090196] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.091298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.092062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.092224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.092355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.092481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.093096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.093244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.093259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.093378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.094465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.094626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.095386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.095887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.095895] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.096014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.121696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.121701] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.121850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.122066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.123623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.123654] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.126115] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.150468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.155746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.155915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.156390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.156527] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.156545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.156663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.157166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.157675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.158251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.159496] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.160588] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.161342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.161558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.161697] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.161838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.162420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.162560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.162575] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.162697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.163796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.163912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.164599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.165100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.165108] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.165277] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.191051] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.191057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.191169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.191336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.192825] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.192907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.194338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.218723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.223490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.223582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.224059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.224236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.224261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.224416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.224940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.225427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.225999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.227123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.228223] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.228958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.229112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.229246] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.229376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.229985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.230124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.230140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.230263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.231310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.231444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.232182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.232692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.232700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.232835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.256880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.256886] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.257011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.257148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.258179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.258253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.259670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.283996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.289369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.289486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.289995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.290204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.290238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.290374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.290874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.291380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.291975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.293127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.294222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.294961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.295114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.295248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.295378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.295969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.296136] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.296152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.296275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.297386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.297507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.298210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.298683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.298688] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.298820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.323464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.323469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.323579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.323717] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.325230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.325261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.326645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.351007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.356334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.356484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.357019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.357250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.357275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.357416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.357917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.358402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.358974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.360092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.361050] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.361791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.361955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.362085] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.362211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.362826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.362976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.362992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.363111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.364709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.364896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.365628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.366158] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.366177] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.366286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.392013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.392018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.392130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.392268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.393781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.393862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.395321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.419695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.425101] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.425240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.425704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.425894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.425922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.426106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.426601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.427148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.427680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.428793] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.429797] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.430565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.430718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.430865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.430995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.431591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.431730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.431745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.431880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.432960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.433130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.433888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.434363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.434369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.434480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.460209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.460215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.460327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.460466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.462001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.462047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.463458] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.487812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.492585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.492686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.493177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.493384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.493405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.493535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.494016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.494518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.495090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.496325] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.497135] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.497899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.498052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.498185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.498315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.498918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.499058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.499073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.499195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.500305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.500448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.501199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.501697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.501703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.501835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.528565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.528570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.528683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.528881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.530438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.530555] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.531783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.556071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.561337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.561451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.561965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.562168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.562187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.562344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.562845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.563348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.563945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.565124] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.566252] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.567015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.567168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.567302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.567432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.568028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.568168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.568183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.568304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.569412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.569583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.570284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.570823] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.570828] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.570942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.597731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.597736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.597884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.598107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.599661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.599692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.601118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.625493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.630725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.630881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.631355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.631490] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.631508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.631625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.632142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.632644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.633220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.634510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.635598] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.636345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.636567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.636710] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.636857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.637440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.637580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.637595] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.637717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.638839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.638954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.639651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.640134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.640139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.640255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.665446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.665451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.665563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.665702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.667226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.667310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.668676] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.693021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.697810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.697953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.698467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.698613] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.698630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.698752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.699249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.699747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.700338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.701479] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.702302] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.703072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.703236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.703367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.703493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.704084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.704264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.704279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.704397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.705500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.705612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.706038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.706536] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.706543] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.706685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.733469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.733474] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.733585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.733724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.735240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.735286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.736715] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.760996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.766377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.766506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.767026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.767230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.767249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.767404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.767900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.768388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.768960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.770084] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.771130] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.771905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.772067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.772197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.772323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.772941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.773091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.773106] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.773225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.773923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.774035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.774717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.775301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.775309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.775473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.803361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.803366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.803478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.803616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.805140] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.805185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.806667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.831035] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.835773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.835899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.836364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.836503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.836521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.836640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.837159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.837647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.838221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.839515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.840605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.841395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.841548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.841681] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.841828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.842411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.842550] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.842566] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.842688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.843787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.843903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.844597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.845119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.845127] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.845296] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.872134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.872139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.872251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.872389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.873892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.873972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.875426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.899801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.905636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.905789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.906341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.906486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.906504] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.906625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.907100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.907604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.908219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.909343] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.910481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.911243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.911397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.911530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.911660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.912258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.912397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.912412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.912535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.913648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.913831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.914573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.915088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.915094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.915217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.940936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.940942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.941054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.941192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.942699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.942743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.944295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.968644] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.973582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.973684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.974231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.974422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.974441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.974571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.975054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.975553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.976138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.977375] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.978502] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.979265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.979417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.979551] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.979681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.980281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.980421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.980436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.980558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.981674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.981858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.982609] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.983111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.983117] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.983230] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.007318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.007326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.007465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.007612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.008644] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.008695] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.010154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.034486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.039217] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.039327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.039838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.040044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.040062] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.040190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.040660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.041186] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.041735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.043035] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.044125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.044889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.045042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.045176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.045305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.045900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.046040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.046055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.046178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.047293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.047463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.048205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.049226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.049232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.049344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.075552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.075557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.075669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.075869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.077423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.077472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.078803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.103087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.107781] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.107905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.108366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.108505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.108523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.108643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.109177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.109670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.110231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.111503] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.112596] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.113369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.113528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.113662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.113811] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.114419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.114559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.114575] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.114699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.115823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.115940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.116631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.117154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.117162] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.117331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.144668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.144673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.144820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.145042] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.146540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.146571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.147817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.172114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.177320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.177464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.177974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.178179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.178198] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.178327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.178828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.179305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.179903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.181028] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.182125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.182891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.183055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.183186] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.183313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.183935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.184119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.184134] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.184254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.185348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.185481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.186196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.186670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.186675] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.186814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.213128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.213132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.213244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.213381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.214412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.214474] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.215782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.240109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.245318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.245436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.245928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.246154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.246173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.246300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.246788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.247277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.247876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.249000] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.250122] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.250885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.251038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.251172] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.251301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.251906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.252045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.252060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.252182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.253295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.253467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.254674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.255225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.255230] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.255338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.283251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.283256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.283371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.283512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.285015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.285060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.286468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.310821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.316716] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.316920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.317394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.317529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.317547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.317665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.318194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.318681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.319254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.320495] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.321587] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.322344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.322498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.322631] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.322774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.323356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.323495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.323511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.323632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.324715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.324850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.325550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.326082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.326089] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.326258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.353668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.353674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.353823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.354051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.355623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.355687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.358132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.382485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.387728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.387895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.388370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.388506] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.388524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.388642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.389182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.389674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.390247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.391494] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.392586] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.393354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.393507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.393641] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.393785] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.394369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.394508] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.394524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.394645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.395724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.395859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.396557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.397089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.397096] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.397264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.423542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.423547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.423659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.423859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.424969] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.425001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.426382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.450755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.455583] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.455678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.456193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.456395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.456420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.456577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.457097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.457571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.458144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.459326] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.460111] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.460879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.461031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.461164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.461293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.461898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.462038] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.462054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.462175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.463286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.463456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.464204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.464674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.464682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.464809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.489955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.489960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.490084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.490223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.491716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.491805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.493202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.517529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.522735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.522910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.523384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.523519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.523537] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.523655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.524193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.524685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.525258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.526495] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.527586] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.528366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.528526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.528660] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.528805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.529389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.529529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.529544] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.529666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.530378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.530492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.531177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.531651] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.531657] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.531830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.555963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.555968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.556080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.556218] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.557739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.557818] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.559250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.583581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.588231] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.588340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.588824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.589048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.589068] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.589198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.589666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.590180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.590742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.591996] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.592799] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.593576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.593730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.593883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.594014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.594607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.594747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.594774] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.594896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.596007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.596172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.596926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.597408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.597413] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.597525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.622658] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.622663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.622810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.623039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.624555] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.624627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.627117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.651453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.656672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.656796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.657271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.657405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.657423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.657540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.658051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.658551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.659151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.660430] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.661506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.662157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.662326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.662456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.662583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.663175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.663348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.663363] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.663482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.664585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.664696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.665406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.665938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.665945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.666122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.693980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.693986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.694126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.694264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.695745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.695836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.697242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.721616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.726744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.726911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.727386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.727521] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.727539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.727657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.728191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.728679] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.729252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.730495] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.731586] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.732340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.732499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.732633] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.732774] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.733357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.733496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.733511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.733633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.734718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.734853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.735535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.736029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.736036] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.736205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.764656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.764661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.764790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.765030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.766517] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.766547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.767768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.792075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.797362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.797488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.798010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.798220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.798239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.798365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.798859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.799347] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.799919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.801123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.802225] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.802962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.803116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.803249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.803378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.803984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.804123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.804139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.804261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.805372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.805512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.806260] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.806788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.806796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.806918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.834290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.834295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.834407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.834546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.836091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.836137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.837464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.861855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.867238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.867393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.867914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.868122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.868141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.868297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.868794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.869276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.869852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.870999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.871974] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.872737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.872927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.873070] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.873197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.873812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.873952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.873967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.874088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.875175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.875339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.876097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.876573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.876579] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.876700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.902365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.902370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.902482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.902621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.904144] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.904190] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.905662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.930036] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.935375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.935500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.935986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.936219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.936238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.936393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.936879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.937371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.937943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.939066] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.940136] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.940911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.941064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.941197] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.941327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.941931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.942071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.942086] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.942209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.943315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.943473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.944218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.944684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.944689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.944817] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.970481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.970487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.970599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.970738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.972250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.972295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.973694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.997992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.002780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.002904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.003371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.003513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.003532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.003655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.004152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.004659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.005221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.006484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.007576] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.008328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.008541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.008715] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.008873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.009456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.009594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.009610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.009732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.010830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.010948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.011635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.012134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.012143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.012311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.038008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.038014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.038154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.038292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.039780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.039856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.041275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.065608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.070740] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.070912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.071386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.071521] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.071539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.071657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.072184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.072672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.073246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.074511] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.075303] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.075913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.076076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.076235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.076421] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.077056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.077208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.077223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.077342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.078451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.078564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.079287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.079737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.079742] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.079867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.106674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.106679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.106826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.107052] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.108545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.108575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.109767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.134048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.139337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.139447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.139967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.140175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.140194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.140321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.140821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.141299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.141897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.143025] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.144125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.144888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.145042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.145175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.145305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.145899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.146038] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.146054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.146176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.147288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.147459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.148206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.148674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.148679] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.148818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.176705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.176710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.176857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.177084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.178567] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.178597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.179783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.204084] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.209323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.209466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.209962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.210193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.210212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.210339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.210830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.211318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.211889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.213045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.214123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.214888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.215042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.215175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.215304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.215901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.216042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.216057] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.216180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.217267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.217438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.218185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.218657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.218663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.218788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.244471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.244477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.244589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.244728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.246259] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.246305] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.247708] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.271994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.277361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.277468] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.277965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.278196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.278215] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.278342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.278836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.279320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.279894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.281123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.282249] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.283011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.283165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.283299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.283429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.284027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.284167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.284183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.284305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.285416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.285587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.286328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.286825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.286831] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.286944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.312639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.312645] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.312775] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.313017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.314056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.314121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.315508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.339923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.345323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.345445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.345942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.346175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.346194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.346320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.346818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.347305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.347894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.349033] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.350130] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.350894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.351047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.351181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.351310] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.351915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.352055] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.352070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.352191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.353295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.353410] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.354162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.354655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.354663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.354790] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.381551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.381556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.381668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.381867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.382953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.382999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.384415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.408784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.413536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.413632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.414132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.414363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.414390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.414532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.415012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.415514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.416086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.417235] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.418338] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.419104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.419259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.419393] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.419522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.420118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.420257] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.420273] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.420394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.421491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.421623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.422388] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.422893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.422901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.423015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.448647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.448653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.448798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.449026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.450517] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.450547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.451783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.476055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.481375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.481490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.481987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.482226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.482251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.482398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.482901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.483388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.483959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.485123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.486233] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.486996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.487150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.487283] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.487411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.488056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.488240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.488255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.488375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.489441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.489560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.490305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.490860] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.490882] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.491016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.518290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.518295] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.518407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.518545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.520090] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.520136] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.521469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.545835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.551800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.551934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.552397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.552533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.552550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.552667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.553237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.553733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.554328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.555483] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.556279] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.556888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.557049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.557179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.557305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.557938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.558153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.558175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.558316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.559427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.559540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.560254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.560707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.560712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.560834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.589867] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.589872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.589984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.590123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.591630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.591673] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.593148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.617523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.622747] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.622913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.623387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.623523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.623541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.623659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.624203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.624694] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.625266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.626495] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.627586] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.628341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.628551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.628690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.628835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.629417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.629557] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.629572] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.629694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.630793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.630909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.631588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.632088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.632096] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.632263] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.659618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.659624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.659735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.659934] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.661004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.661063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.662457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.686813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.692649] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.692800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.693275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.693410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.693428] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.693545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.694060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.694562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.695169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.696494] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.697607] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.698383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.698567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.698697] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.698870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.699484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.699619] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.699634] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.699754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.700897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.701009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.701701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.702226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.702233] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.702396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.728126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.728132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.728257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.728396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.729897] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.729977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.731380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.755717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.760530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.760623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.761105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.761337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.761363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.761507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.762012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.762493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.763065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.764215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.765295] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.766048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.766201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.766334] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.766463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.767070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.767210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.767225] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.767347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.768436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.768553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.768926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.769435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.769443] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.769600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.793694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.793699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.793869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.794081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.795560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.795590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.796782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.821074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.826323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.826466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.827009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.827219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.827239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.827366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.827840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.828345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.828942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.830123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.830931] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.831699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.831866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.832000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.832130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.832723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.832874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.832890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.833013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.834129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.834284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.835041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.835505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.835510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.835633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.862357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.862363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.862474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.862612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.864136] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.864182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.865616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.889950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.895397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.895520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.896019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.896219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.896245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.896402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.896899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.897387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.897958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.899123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.900222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.900963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.901116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.901249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.901379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.901985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.902125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.902140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.902262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.903374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.903532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.903919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.904388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.904396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.904509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.929657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.929662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.929810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.930037] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.931540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.931585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.934097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.958452] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.963141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.963254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.963720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.963907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.963946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.964125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.964599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.965127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.965674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.966794] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.967795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.968420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.968574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.968707] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.968859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.969485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.969621] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.969636] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.969755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.970897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.971063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.971868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.972348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.972354] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.972468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.999810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.999816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.999943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.000081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.001575] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.001606] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.004096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.028479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.033175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.033302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.033802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.033948] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.033967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.034090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.034557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.035080] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.035633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.036802] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.037793] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.038555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.038707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.038853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.038983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.039577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.039716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.039731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.039863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.040952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.041072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.041784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.042252] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.042258] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.042384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.069677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.069682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.069807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.069980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.071489] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.071518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.072803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.097117] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.102359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.102494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.103047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.103202] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.103221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.103371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.103898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.104350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.104948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.106073] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.107119] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.107732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.107916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.108046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.108172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.108781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.108961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.108976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.109096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.110229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.110369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.111082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.111548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.111553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.111661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.136299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.136304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.136415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.136552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.138063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.138121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.139428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.163825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.168612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.168741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.169261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.169412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.169431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.169578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.170132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.170579] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.171164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.172289] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.173371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.174140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.174293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.174426] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.174556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.175152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.175295] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.175310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.175432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.176531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.176646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.177350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.177848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.177854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.177965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.203628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.203633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.203743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.203960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.205485] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.205514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.206807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.231222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.235994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.236121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.236593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.236742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.236776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.236944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.237421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.237965] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.238483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.239587] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.240660] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.241417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.241570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.241703] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.241845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.242427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.242566] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.242582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.242704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.243795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.243910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.244588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.245076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.245083] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.245195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.268704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.268709] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.268846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.269031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.270519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.270547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.271779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.296148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.300792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.300913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.301376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.301525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.301545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.301676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.302196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.302693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.303280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.304379] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.305481] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.306244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.306396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.306529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.306658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.307268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.307408] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.307423] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.307546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.308643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.308770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.309455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.309966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.309971] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.310083] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.334617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.334622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.334732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.334920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.336458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.336488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.337766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.362155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.366774] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.366893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.367368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.367516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.367536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.367665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.368160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.368674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.369249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.370378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.371184] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.371959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.372111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.372244] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.372374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.372979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.373145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.373160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.373279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.374382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.374495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.375218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.375714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.375719] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.375866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.403753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.403763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.403902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.404039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.405541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.405571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.406783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.431134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.435752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.435864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.436326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.436464] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.436482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.436602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.437085] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.437580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.438171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.439291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.440372] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.441150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.441303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.441436] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.441565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.442163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.442303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.442319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.442441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.443507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.443632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.444322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.444836] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.444841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.444951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.469564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.469570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.469684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.469869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.471421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.471453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.472824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.497242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.503145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.503277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.503737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.503948] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.503968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.504101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.504599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.505142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.505657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.506795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.507794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.508610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.508774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.508917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.509043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.509622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.509764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.509779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.509936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.511057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.511168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.511854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.512369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.512376] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.512491] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.537073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.537079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.537204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.537342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.538364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.538394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.539746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.564127] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.568741] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.568862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.569327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.569496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.569515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.569659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.570169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.570671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.571248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.572356] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.573159] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.573946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.574102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.574235] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.574364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.574966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.575106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.575121] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.575243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.576354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.576482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.577181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.577678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.577683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.577835] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.601296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.601301] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.601416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.601557] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.603123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.603167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.604457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.628866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.633655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.633792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.634273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.634442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.634461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.634606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.635082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.635583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.636174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.637292] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.638394] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.639167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.639322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.639456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.639586] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.640177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.640316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.640332] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.640454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.641565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.641713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.642423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.642971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.642976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.643098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.667694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.667699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.667853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.668040] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.669579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.669612] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.672097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.696494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.701201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.701308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.701783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.701960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.701979] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.702099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.702594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.703117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.703656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.704784] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.705795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.706566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.706719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.706862] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.706991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.707573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.707713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.707728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.707858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.708976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.709091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.709785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.710262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.710267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.710414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.734476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.734481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.734593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.734730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.736249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.736295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.737681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.762031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.766738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.766856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.767322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.767491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.767510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.767655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.768166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.768668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.769245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.770354] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.771462] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.772168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.772324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.772457] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.772587] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.773192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.773357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.773372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.773492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.774548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.774700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.775413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.775899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.775904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.776016] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.799505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.799510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.799624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.799774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.801357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.801404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.802826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.827210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.832558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.832663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.833194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.833385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.833403] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.833549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.834062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.834529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.835108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.836351] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.837471] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.838244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.838400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.838534] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.838664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.839257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.839397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.839412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.839535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.840623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.840786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.841504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.842017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.842022] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.842134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.866669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.866674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.866812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.866989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.868528] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.868560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.871101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.895435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.900196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.900302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.900776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.900953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.900971] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.901107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.901622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.902136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.902697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.903996] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.905104] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.905880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.906033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.906167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.906296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.906886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.907025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.907041] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.907162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.908238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.908380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.909093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.909553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.909558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.909671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.933666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.933671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.933792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.933977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.935516] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.935549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.938096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.962465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.967173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.967277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.967741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.967893] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.967938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.968072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.968570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.969111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.969627] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.970796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.971794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.972574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.972731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.972872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.973002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.973585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.973724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.973740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.973871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.974957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.975072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.975745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.976242] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.976250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.976367] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.999346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.999351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.999466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.999606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.001112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.001170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.002428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.026816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.031563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.031679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.032178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.032317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.032336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.032492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.033043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.033513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.034082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.035218] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.036298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.037097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.037253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.037386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.037516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.038118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.038298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.038314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.038433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.039562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.039692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.040382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.040886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.040893] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.041028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.064467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.064472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.064583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.064721] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.066243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.066291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.067696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.092007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.096740] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.096862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.097325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.097493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.097512] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.097655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.098165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.098667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.099277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.100380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.101353] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.102154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.102310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.102443] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.102572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.103214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.103364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.103379] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.103499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.104620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.104749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.105451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.105968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.105975] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.106109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.129005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.129011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.129125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.129265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.130763] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.130794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.132229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.156599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.161684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.161812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.162288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.162423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.162442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.162558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.163042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.163546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.164171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.165456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.166494] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.167268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.167466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.167610] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.167740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.168333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.168473] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.168489] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.168611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.169677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.169809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.170495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.170975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.170980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.171127] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.195685] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.195690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.195829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.196006] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.197544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.197590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.198782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.223122] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.227738] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.227864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.228329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.228504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.228523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.228670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.229148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.229663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.230224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.231484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.232591] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.233336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.233491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.233625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.233754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.234347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.234486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.234501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.234623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.235736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.235898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.236625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.237183] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.237189] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.237311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.260820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.260825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.260939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.261079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.262571] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.262602] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.263820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.288205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.292959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.293067] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.293535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.293677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.293696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.293834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.294301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.294835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.295377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.296622] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.297722] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.298519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.298675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.298817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.298947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.299541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.299679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.299695] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.299828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.300917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.301044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.301742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.302253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.302259] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.302399] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.326441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.326446] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.326557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.326694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.328259] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.328326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.329697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.354066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.358743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.358866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.359332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.359499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.359518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.359662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.360167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.360669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.361256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.362361] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.363474] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.364271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.364427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.364560] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.364689] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.365281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.365419] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.365435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.365557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.366662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.366830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.367516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.368005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.368010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.368122] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.391582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.391587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.391700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.391851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.393425] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.393457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.394766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.419160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.423789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.423897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.424363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.424531] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.424549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.424694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.425200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.425687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.426274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.427378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.428508] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.429281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.429436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.429568] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.429699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.430313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.430453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.430468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.430591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.431687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.431825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.432506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.433010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.433017] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.433151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.457218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.457223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.457334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.457471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.458501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.458531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.459767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.484191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.488997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.489105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.489565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.489704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.489723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.489856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.490373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.490900] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.491446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.492590] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.493660] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.494421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.494579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.494744] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.494910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.495493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.495632] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.495648] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.495778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.496866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.496981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.497679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.498160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.498166] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.498319] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.521836] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.521841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.521956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.522096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.523605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.523635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.524783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.549129] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.554901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.555037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.555510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.555646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.555663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.555808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.556323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.556867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.557384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.558516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.559614] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.560404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.560559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.560692] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.560834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.561417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.561556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.561571] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.561694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.562791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.562905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.563613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.564108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.564114] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.564253] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.588318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.588323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.588434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.588572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.590079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.590110] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.591429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.615801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.620637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.620777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.621311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.621501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.621520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.621665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.622197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.622685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.623261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.624424] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.625502] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.626275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.626432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.626566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.626695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.627286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.627426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.627442] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.627563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.628671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.628827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.629560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.630070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.630076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.630185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.653689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.653694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.653842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.654029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.655564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.655596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.658089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.682443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.687187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.687294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.687776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.687966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.687985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.688121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.688635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.689162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.689711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.690978] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.692081] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.692800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.692954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.693086] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.693216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.693813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.693962] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.693977] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.694100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.695209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.695332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.696030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.696508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.696513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.696625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.721180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.721185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.721309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.721445] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.722953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.722984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.724369] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.748707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.753515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.753645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.754182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.754333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.754352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.754475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.754956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.755456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.756046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.757292] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.758378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.759162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.759316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.759449] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.759577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.760176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.760324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.760339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.760462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.761564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.761682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.762400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.762937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.762944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.763063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.789282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.789287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.789397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.789533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.791040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.791071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.792461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.816837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.822278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.822422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.822954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.823138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.823157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.823306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.823801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.824285] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.824894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.826019] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.827125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.827889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.828051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.828182] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.828308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.828939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.829087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.829103] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.829225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.830335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.830450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.831145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.831622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.831627] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.831736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.856896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.856900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.857025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.857161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.858656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.858688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.860130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.884514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.889179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.889286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.889751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.889929] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.889949] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.890082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.890561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.891088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.891634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.892795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.893792] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.894559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.894713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.894891] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.895046] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.895629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.895776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.895791] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.895914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.897002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.897117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.897821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.898302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.898307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.898458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.921944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.921949] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.922064] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.922204] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.923708] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.923739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.925202] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.949599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.954147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.954252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.954716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.954867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.954913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.955046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.955524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.956056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.956586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.957718] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.958664] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.959423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.959576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.959709] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.959856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.960448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.960587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.960603] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.960725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.961825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.961941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.962638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.963151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.963158] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.963281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.988978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.988983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.989094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.989230] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.990725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.990756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.992179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.016535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.020764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.020906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.021370] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.021509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.021528] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.021648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.022169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.022680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.023246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.024382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.025500] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.026265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.026418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.026551] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.026681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.027285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.027431] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.027447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.027569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.028657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.028781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.029467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.029973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.029980] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.030102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.056366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.056371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.056483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.056620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.058161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.058219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.059619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.084005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.088743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.088871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.089346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.089494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.089514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.089644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.090184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.090680] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.091238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.092358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.093477] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.094173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.094326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.094458] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.094588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.095188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.095336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.095352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.095475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.096577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.096694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.097406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.097915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.097923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.098045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.121484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.121489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.121602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.121742] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.123247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.123313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.124702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.149063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.154370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.154492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.154984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.155170] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.155189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.155338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.155854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.156315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.156925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.158046] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.159125] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.159890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.160043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.160176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.160306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.160905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.161053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.161069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.161191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.162301] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.162416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.163167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.163625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.163630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.163739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.190505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.190509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.190620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.190756] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.192318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.192378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.193816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.218149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.222898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.223022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.223496] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.223647] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.223667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.223821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.224301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.224836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.225377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.226619] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.227712] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.228475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.228628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.228776] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.228915] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.229497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.229636] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.229652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.229792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.230911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.231032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.231726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.232221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.232228] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.232348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.255828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.255833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.255956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.256109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.257629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.257660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.260095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.284481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.289203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.289328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.289821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.290009] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.290030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.290179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.290652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.291180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.291728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.292798] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.293800] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.294563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.294715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.294869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.295006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.295599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.295739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.295754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.295893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.297001] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.297123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.297833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.298299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.298304] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.298416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.323033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.323038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.323147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.323283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.324811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.324856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.326245] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.350612] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.355182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.355308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.355819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.355986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.356005] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.356124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.356628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.357146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.357694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.358799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.359802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.360564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.360718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.360871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.361009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.361592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.361731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.361746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.361886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.362983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.363107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.363814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.364294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.364300] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.364412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.390654] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.390659] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.390796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.390976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.392506] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.392537] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.393783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.418169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.422936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.423065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.423543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.423695] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.423715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.423870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.424352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.424888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.425428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.426671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.427773] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.428534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.428685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.428838] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.428976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.429568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.429708] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.429723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.429865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.430984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.431105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.431793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.432275] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.432280] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.432391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.456999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.457004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.457127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.457264] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.458780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.458825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.460223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.484608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.489707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.489883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.490369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.490515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.490534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.490661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.491196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.491692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.492257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.493382] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.494188] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.494963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.495116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.495249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.495378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.495975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.496124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.496139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.496261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.497370] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.497486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.498180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.498648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.498654] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.498778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.523916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.523920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.524030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.524166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.525190] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.525220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.526603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.550997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.555843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.555948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.556412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.556580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.556599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.556744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.557262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.557740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.558321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.559458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.560512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.561285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.561442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.561576] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.561706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.562307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.562453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.562469] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.562591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.563700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.563827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.564524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.565030] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.565037] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.565159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.591890] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.591895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.592033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.592169] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.593675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.593706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.596097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.620491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.625230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.625384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.625884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.626039] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.626058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.626179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.626641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.627157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.627718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.628796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.629755] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.630403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.630557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.630690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.630849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.631437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.631573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.631588] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.631707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.632843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.632957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.633644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.634160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.634167] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.634286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.660532] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.660536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.660647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.660819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.661830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.661860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.663250] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.687613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.692220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.692375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.692883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.693036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.693055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.693177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.693635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.694154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.694715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.695799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.696801] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.697564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.697717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.697879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.698013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.698592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.698728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.698743] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.698877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.699971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.700092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.700802] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.701269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.701274] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.701383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.726561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.726566] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.726675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.726847] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.727849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.727878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.729260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.753638] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.757815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.757913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.758374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.758513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.758531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.758651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.759134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.759643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.760212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.761333] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.762426] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.763173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.763327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.763460] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.763590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.764201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.764345] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.764360] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.764479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.765573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.765687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.766392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.766908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.766915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.767034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.789969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.789974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.790084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.790220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.791244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.791277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.792686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.817036] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.821930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.822084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.822554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.822701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.822721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.822881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.823362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.823887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.824438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.825673] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.826782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.827572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.827724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.827889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.828023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.828603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.828739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.828754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.828892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.830008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.830126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.830838] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.831310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.831315] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.831425] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.857131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.857136] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.857245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.857382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.858873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.858917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.860312] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.884696] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.889494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.889623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.890123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.890273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.890292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.890413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.890890] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.891390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.891968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.893092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.894124] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.894890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.895042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.895176] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.895306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.895913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.896062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.896078] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.896200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.897311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.897426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.898134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.898609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.898614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.898725] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.925489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.925494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.925604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.925741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.926785] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.926850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.928262] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.952643] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.956159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.956275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.956750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.956919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.956945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.957066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.957530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.958058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.958606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.959797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.960801] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.961565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.961718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.961871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.962008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.962590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.962729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.962745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.962881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.963999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.964121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.964835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.965297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.965303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.965415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.992703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.992708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.992861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.993027] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.994508] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.994538] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.995784] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.020138] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.025373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.025500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.026005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.026159] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.026178] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.026299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.026775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.027278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.027856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.028979] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.030074] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.030801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.030954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.031087] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.031216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.031811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.031960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.031975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.032098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.033190] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.033313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.034052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.034504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.034509] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.034621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.060334] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.060339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.060449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.060585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.062095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.062138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.063658] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.088075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.092787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.092903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.093377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.093525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.093545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.093675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.094169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.094677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.095246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.096385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.097501] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.098294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.098446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.098579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.098709] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.099322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.099464] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.099479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.099597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.100700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.100819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.101500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.102035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.102042] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.102162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.127883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.127887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.127997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.128134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.129177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.129198] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.130462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.154845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.158915] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.159056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.159528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.159673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.159692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.159856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.160358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.160882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.161434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.162671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.163776] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.164567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.164719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.164871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.165009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.165591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.165729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.165744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.165886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.166985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.167108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.167832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.168293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.168298] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.168410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.194588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.194593] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.194703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.194943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.196435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.196465] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.197816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.222223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.227017] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.227147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.227622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.227792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.227833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.227979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.228443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.228968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.229519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.230639] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.231733] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.232513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.232666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.232831] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.232999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.233578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.233713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.233728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.233864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.235004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.235124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.235830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.236314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.236320] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.236429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.262605] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.262609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.262719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.262941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.263958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.263988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.265346] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.289714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.295141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.295296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.295798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.295954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.295973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.296094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.296556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.297082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.297634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.298797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.299802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.300566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.300718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.300869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.301006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.301587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.301727] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.301742] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.301879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.302997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.303118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.303834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.304303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.304309] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.304420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.330076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.330080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.330190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.330326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.331334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.331365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.332748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.357143] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.361817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.361958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.362429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.362575] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.362594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.362720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.363226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.363720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.364289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.365410] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.366532] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.367325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.367479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.367612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.367742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.368358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.368500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.368514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.368634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.369785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.369902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.370595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.371110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.371118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.371240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.394680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.394684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.394806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.395005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.395997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.396027] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.397387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.421785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.425821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.425957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.426428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.426573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.426593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.426720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.427228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.427737] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.428305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.429440] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.430505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.431271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.431423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.431556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.431686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.432290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.432435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.432450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.432573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.433679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.433804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.434488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.435026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.435033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.435156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.459753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.459777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.459900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.460037] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.461050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.461081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.462479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.486871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.492252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.492407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.492911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.493093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.493112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.493232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.493695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.494210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.494812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.495805] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.496800] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.497565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.497718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.497882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.498052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.498631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.498783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.498825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.498974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.500060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.500184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.500887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.501344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.501350] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.501462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.525491] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.525496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.525605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.525742] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.526780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.526825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.528227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.552620] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.556810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.556908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.557372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.557510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.557529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.557649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.558135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.558643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.559212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.560334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.561433] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.562200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.562353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.562487] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.562616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.563227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.563373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.563388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.563506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.564611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.564724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.565432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.565947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.565954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.566101] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.592865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.592870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.592995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.593132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.594180] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.594201] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.595461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.619849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.625220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.625375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.625878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.626032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.626051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.626171] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.626634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.627150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.627711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.628797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.629802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.630565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.630718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.630870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.631008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.631602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.631741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.631756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.631896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.632995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.633117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.633833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.634302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.634307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.634419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.659502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.659507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.659617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.659754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.661241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.661271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.662657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.687068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.691841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.691983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.692453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.692598] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.692617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.692743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.693249] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.693743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.694312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.695434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.696504] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.697297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.697450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.697585] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.697714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.698330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.698472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.698487] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.698607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.699718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.699843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.700540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.701047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.701055] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.701178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.724647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.724652] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.724773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.724938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.725932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.725985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.727395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.751796] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.757138] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.757284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.757756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.757937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.757965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.758093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.758557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.759098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.759633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.760799] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.761802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.762566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.762719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.762872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.763009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.763592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.763732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.763747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.763888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.764988] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.765111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.765831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.766291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.766296] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.766407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.792064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.792068] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.792207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.792344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.793350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.793380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.794792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.819179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.824507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.824631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.825169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.825318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.825336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.825457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.825959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.826436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.827045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.828125] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.829218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.829963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.830116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.830249] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.830378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.830973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.831122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.831137] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.831259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.832297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.832424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.833121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.833579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.833584] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.833696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.858269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.858273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.858384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.858521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.860018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.860061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.861496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.885886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.890752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.890887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.891358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.891507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.891527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.891656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.892150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.892659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.893228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.894345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.895450] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.896173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.896327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.896459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.896590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.897187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.897335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.897350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.897472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.898567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.898684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.899391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.899896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.899903] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.900024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.925675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.925679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.925802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.925965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.926961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.927014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.928461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.952841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.957671] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.957810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.958285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.958439] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.958460] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.958594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.959089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.959584] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.960164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.961431] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.962504] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.963270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.963422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.963556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.963685] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.964289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.964435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.964450] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.964573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.965668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.965794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.966491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.967006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.967013] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.967137] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.993337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.993342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.993452] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.993589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.994602] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.994632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.997122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.021501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.026199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.026308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.026799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.026947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.026966] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.027086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.027549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.028074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.028625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.029797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.030801] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.031565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.031717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.031880] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.032015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.032594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.032729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.032744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.032879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.033970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.034089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.034793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.035269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.035274] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.035383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.060533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.060538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.060648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.060850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.062389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.062436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.063782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.088109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.092775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.092900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.093378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.093529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.093549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.093682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.094183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.094703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.095262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.096509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.097606] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.098371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.098524] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.098657] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.098808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.099400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.099539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.099555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.099677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.100792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.100907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.101602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.102116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.102124] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.102248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.126301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.126305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.126415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.126552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.128577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.128608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.129783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.154145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.158787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.158912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.159387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.159535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.159554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.159683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.160207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.160703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.161296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.162468] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.163504] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.164272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.164426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.164559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.164688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.165295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.165441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.165457] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.165579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.166684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.166811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.167505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.168004] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.168012] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.168134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.190572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.190577] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.190689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.190878] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.192405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.192435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.193778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.218164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.222826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.222959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.223434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.223583] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.223603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.223733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.224254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.224751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.225332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.226479] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.227597] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.228335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.228488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.228620] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.228749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.229363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.229505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.229520] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.229639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.230754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.230883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.231562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.232085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.232092] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.232213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.258411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.258415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.258529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.258669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.260182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.260228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.261643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.286021] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.291426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.291550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.292056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.292245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.292265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.292414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.292932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.293392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.293970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.295102] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.296123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.296888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.297050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.297180] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.297306] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.297917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.298075] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.298090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.298209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.299335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.299462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.300177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.300631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.300636] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.300745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.325882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.325887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.326025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.326161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.327192] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.327237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.328628] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.352986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.357801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.357935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.358413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.358565] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.358585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.358718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.359216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.359736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.360295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.361508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.362604] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.363336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.363489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.363622] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.363752] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.364357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.364503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.364518] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.364641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.365771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.365886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.366577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.367087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.367094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.367217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.392351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.392356] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.392466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.392604] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.394113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.394143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.395435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.419756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.424565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.424694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.425190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.425340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.425365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.425491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.425982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.426480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.427075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.428200] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.429289] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.430051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.430204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.430337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.430467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.431073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.431221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.431236] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.431358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.432466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.432581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.433257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.433750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.433755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.433878] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.457894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.457900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.458025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.458163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.459670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.459700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.462096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.486473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.491197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.491304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.491785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.491976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.491995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.492131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.492648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.493161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.493723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.494795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.495802] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.496431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.496587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.496721] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.496877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.497478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.497614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.497629] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.497748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.498924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.499047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.499732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.500244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.500251] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.500376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.524415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.524420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.524530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.524667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.526211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.526270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.527693] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.552039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.556780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.556892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.557357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.557496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.557514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.557634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.558147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.558641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.559207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.560352] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.561469] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.562175] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.562356] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.562517] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.562651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.563279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.563421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.563436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.563555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.564657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.564798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.565492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.566055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.566062] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.566181] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.591298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.591303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.591417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.591558] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.593050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.593133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.594430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.618819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.623601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.623729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.624258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.624398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.624417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.624553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.625100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.625583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.626172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.627291] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.628399] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.629170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.629327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.629460] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.629589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.630183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.630323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.630338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.630461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.631556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.631686] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.632391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.632910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.632917] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.633054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.657116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.657133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.657245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.657382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.658902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.658933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.660361] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.684756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.690169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.690285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.690750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.690932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.690978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.691138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.691601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.692124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.692689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.693979] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.695085] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.695792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.695944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.696077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.696206] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.696798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.696937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.696952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.697075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.698189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.698336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.699154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.699603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.699609] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.699718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.724373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.724378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.724489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.724626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.726158] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.726203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.727620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.752023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.756801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.756909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.757374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.757546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.757564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.757710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.758217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.758701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.759289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.760402] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.761499] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.762310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.762462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.762595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.762725] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.763381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.763517] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.763532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.763651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.764792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.764919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.765612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.766104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.766110] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.766249] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.788613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.788618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.788732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.788910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.790462] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.790497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.791820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.816190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.820977] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.821084] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.821549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.821688] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.821707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.821840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.822354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.822881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.823427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.824547] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.825647] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.826421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.826574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.826741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.826895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.827485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.827625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.827640] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.827770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.828858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.828973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.829657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.830153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.830158] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.830300] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.854862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.854867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.854993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.855130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.856622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.856653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.859097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.883439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.888198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.888305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.888777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.888954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.888972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.889092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.889619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.890138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.890689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.891988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.893090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.893875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.894028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.894162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.894290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.894882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.895021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.895036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.895158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.896257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.896382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.897068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.897559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.897566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.897703] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.922342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.922347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.922459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.922597] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.924639] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.924684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.926112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.950490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.954795] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.954903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.955368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.955534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.955553] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.955697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.956201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.956686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.957273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.958381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.959526] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.960300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.960457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.960590] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.960719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.961311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.961450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.961466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.961589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.962693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.962856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.963587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.964144] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.964150] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.964273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.989944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.989951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.990077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.990215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.991714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.991743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.993187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.017556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.021804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.021907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.022386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.022552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.022571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.022714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.023220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.023705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.024293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.025392] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.026501] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.027300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.027456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.027589] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.027718] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.028322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.028458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.028473] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.028592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.029691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.029853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.030561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.031092] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.031098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.031221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.055814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.055819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.055944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.056081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.057572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.057603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.058808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.083148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.087742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.087860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.088325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.088497] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.088521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.088664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.089142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.089657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.090219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.091478] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.092582] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.093337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.093492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.093625] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.093755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.094346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.094485] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.094500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.094622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.095726] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.095901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.096587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.097102] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.097108] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.097217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.123450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.123455] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.123566] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.123703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.124790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.124848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.126224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.150566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.154804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.154908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.155366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.155533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.155552] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.155696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.156200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.156687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.157275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.158530] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.159630] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.160402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.160558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.160691] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.160831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.161430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.161568] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.161584] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.161707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.162804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.162933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.163625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.164126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.164132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.164269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.188352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.188357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.188470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.188607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.190635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.190680] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.192112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.216509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.221705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.221848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.222309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.222444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.222463] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.222580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.223090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.223569] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.224176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.225470] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.226496] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.227260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.227413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.227548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.227678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.228274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.228414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.228429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.228551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.229618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.229740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.230446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.230942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.230947] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.231059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.255675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.255680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.255831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.256005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.257487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.257521] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.258780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.283079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.287746] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.287861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.288326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.288495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.288513] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.288657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.289165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.289667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.290263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.291378] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.292494] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.293290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.293446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.293579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.293708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.294345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.294539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.294561] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.294742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.295856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.295998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.296691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.297186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.297191] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.297303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.321319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.321325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.321441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.321583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.323117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.323176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.324471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.348825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.354178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.354282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.354746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.354959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.354980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.355137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.355601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.356139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.356687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.357797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.358775] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.359589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.359745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.359898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.360025] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.360616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.360751] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.360789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.360922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.362117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.362240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.362953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.363458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.363464] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.363600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.390389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.390394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.390506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.390643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.392149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.392180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.393610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.417959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.422775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.422894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.423375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.423520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.423539] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.423659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.424185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.424665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.425241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.426381] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.427345] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.427972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.428152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.428286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.428416] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.429020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.429192] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.429207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.429326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.431003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.431115] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.431826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.432316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.432323] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.432448] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.458123] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.458129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.458254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.458392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.459894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.459939] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.461340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.485730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.490538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.490666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.491195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.491338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.491357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.491477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.492054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.492524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.493127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.494257] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.495359] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.496152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.496333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.496466] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.496596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.497188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.497327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.497342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.497464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.498530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.498654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.499362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.499870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.499877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.500021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.524118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.524123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.524234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.524371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.525861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.525946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.527367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.551736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.556559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.556688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.557189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.557329] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.557349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.557470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.558001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.558481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.559039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.560123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.561220] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.561961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.562165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.562307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.562454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.563056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.563206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.563221] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.563340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.564406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.564529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.565218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.565681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.565688] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.565818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.590920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.590925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.591050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.591186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.592679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.592710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.594154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.618525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.622819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.622922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.623391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.623540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.623560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.623680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.624189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.624696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.625261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.626397] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.627495] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.628299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.628463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.628593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.628719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.629350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.629499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.629514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.629632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.630753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.630920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.631664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.632703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.632710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.632855] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.659691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.659696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.659846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.660033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.661556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.661603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.662784] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.687128] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.692447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.692552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.693069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.693232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.693250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.693390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.693943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.694415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.694995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.696242] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.697335] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.698103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.698255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.698389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.698518] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.699120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.699271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.699286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.699409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.700514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.700631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.701320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.701817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.701824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.701945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.725448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.725452] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.725561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.725698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.726749] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.726796] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.728222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.752605] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.757122] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.757247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.757722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.757920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.757959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.758087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.758579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.759107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.759643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.760797] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.761801] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.762564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.762717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.762868] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.763006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.763599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.763738] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.763754] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.763891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.764985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.765108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.765824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.766296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.766302] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.766412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.789922] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.789926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.790040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.790180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.791677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.791708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.793124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.817478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.822690] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.822894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.823376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.823522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.823541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.823668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.824201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.824697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.825263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.826383] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.827500] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.828292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.828445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.828579] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.828708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.829319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.829460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.829475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.829594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.830692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.830815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.831506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.832050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.832057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.832207] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.858964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.858969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.859092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.859228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.860724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.860754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.862133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.886512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.891376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.891477] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.891986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.892149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.892168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.892316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.892838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.893294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.893897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.895030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.896124] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.896902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.897050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.897181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.897307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.897951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.898095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.898110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.898229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.899314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.899428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.900155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.900608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.900613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.900722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.926399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.926404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.926513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.926650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.928157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.928188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.929574] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.953966] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.959385] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.959516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.960013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.960169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.960189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.960312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.960796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.961293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.961873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.963128] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.964221] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.964964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.965117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.965250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.965379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.965987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.966136] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.966152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.966273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.967380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.967497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.968182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.968656] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.968661] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.968811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.993418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.993423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.993535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.993672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.995169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.995200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.996619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.020987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.025870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.025998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.026470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.026648] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.026668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.026832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.027322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.027863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.028410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.029507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.030599] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.031333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.031486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.031619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.031748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.032343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.032482] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.032497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.032619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.033691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.033825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.034531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.035063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.035068] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.035218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.059773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.059792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.059915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.060051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.061073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.061103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.062463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.086857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.091640] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.091778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.092347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.092497] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.092517] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.092663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.093208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.093696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.094272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.095422] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.096200] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.096962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.097118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.097251] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.097381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.097983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.098148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.098163] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.098282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.098964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.099078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.099738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.100262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.100267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.100389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.125533] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.125537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.125646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.125826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.127402] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.127448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.128824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.153179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.157967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.158099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.158577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.158730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.158750] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.158895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.159399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.159921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.160486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.161744] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.162799] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.163586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.163739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.163895] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.164052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.164636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.164784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.164800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.164951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.166036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.166184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.166925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.167399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.167404] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.167513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.191571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.191576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.191689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.191843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.193396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.193440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.194755] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.219166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.224467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.224593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.225102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.225293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.225311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.225448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.225947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.226440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.227009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.228126] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.229221] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.229964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.230117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.230250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.230379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.230981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.231148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.231164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.231286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.232397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.232513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.233183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.233697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.233704] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.233854] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.257912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.257917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.258041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.258178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.259685] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.259731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.262123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.286508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.291177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.291304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.291789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.292010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.292029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.292167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.292644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.293171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.293720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.295024] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.296122] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.296901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.297051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.297182] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.297307] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.297922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.298100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.298115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.298235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.299319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.299466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.300261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.300726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.300734] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.300895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.326068] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.326073] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.326197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.326334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.327359] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.327404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.328771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.353147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.357777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.357937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.358412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.358590] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.358610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.358740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.359254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.359738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.360329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.361644] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.362615] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.363385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.363538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.363672] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.363817] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.364436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.364576] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.364592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.364714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.365863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.365980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.366654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.367167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.367174] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.367311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.390267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.390273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.390386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.390527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.392071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.392163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.393476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.417859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.422639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.422779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.423269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.423412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.423432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.423555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.424032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.424537] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.425106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.426380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.427491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.428259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.428411] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.428544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.428674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.429275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.429448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.429464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.429586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.430694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.430818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.431523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.432070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.432075] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.432226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.457955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.457960] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.458085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.458222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.459716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.459803] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.461188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.485588] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.490166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.490293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.490778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.490991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.491010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.491145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.491622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.492159] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.492697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.493796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.494794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.495572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.495725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.495873] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.496030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.496625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.496772] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.496787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.496938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.498026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.498168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.498867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.499354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.499361] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.499495] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.524034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.524039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.524179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.524316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.525833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.525895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.527302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.551633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.556649] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.556797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.557283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.557430] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.557449] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.557576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.558096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.558607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.559230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.560380] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.561202] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.561964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.562117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.562251] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.562380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.562985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.563149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.563164] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.563284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.564318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.564458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.565154] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.565634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.565640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.565751] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.591393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.591397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.591509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.591646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.593177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.593223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.594630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.619020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.624427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.624554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.625041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.625254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.625274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.625411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.625911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.626403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.626995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.628127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.629221] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.629963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.630116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.630250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.630380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.630982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.631149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.631165] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.631287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.632399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.632516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.633212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.633697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.633704] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.633836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.658457] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.658462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.658573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.658710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.660242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.660273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.661663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.686041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.690860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.691030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.691505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.691654] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.691674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.691832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.692368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.692901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.693428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.694671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.695773] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.696535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.696688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.696835] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.696993] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.697576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.697716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.697732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.697866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.698996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.699137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.699841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.700324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.700332] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.700467] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.724475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.724480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.724591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.724727] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.726291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.726322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.727679] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.752067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.757374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.757499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.758006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.758226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.758245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.758381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.758881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.759372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.759942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.761125] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.762219] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.762962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.763115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.763248] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.763378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.763982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.764187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.764202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.764322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.765429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.765542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.766275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.766734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.766741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.766918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.793219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.793223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.793346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.793483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [101.795018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.795066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.796483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [101.820866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [101.825703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [101.825841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.826316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.826494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.826515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.826644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.827131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.827642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.828234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.829349] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.830131] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.830901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.831054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.831187] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.831317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.831927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.832096] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.832111] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.832233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.833344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.833466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.834160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.834642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.834649] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.834792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [101.842521] [IGT] i915_pm_rpm: exiting, ret=77 <6> [101.846319] Console: switching to colour frame buffer device 128x48 <7> [101.859940] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.859945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.860072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.860446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.860470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [101.860594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.861084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.861263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [101.861353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [101.861473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.861988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.862468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.863024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [101.864212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [101.865289] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [101.866049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [101.866215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.866345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.866472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.867076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.867253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [101.867270] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [101.867388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.868493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.868605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [101.869287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [101.870296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.870303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.870433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [101.898317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [101.898323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [101.898436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [101.898569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [101.898720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [101.898903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [101.899337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [101.899994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [101.900125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [101.900252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [101.900854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

Created at 2023-08-13 20:39:05