igt@i915_module_load@reload on fi-kbl-8809g@linus-v6.5-rc6 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g74c7773be (x86_64) (Linux: 6.5.0-rc6-linus-v6.5-rc6-g2ccdd1b13c59+ x86_64)
Out	Starting subtest: reload Opened device: /dev/dri/card0 Subtest reload: SUCCESS (3.253s)
Err	Starting subtest: reload Subtest reload: SUCCESS (3.253s)
Dmesg	<6> [187.352726] [IGT] i915_module_load: executing <6> [187.356096] [IGT] i915_module_load: starting subtest reload <7> [187.490822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.496568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-5] <7> [187.497102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.497310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.497463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.497954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.498483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.498698] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [187.498822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-5] Same epoch counter 1 <7> [187.498850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-3] <7> [187.506197] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [187.506336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [187.506469] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [187.506601] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [187.506758] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [187.506890] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [187.507021] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [187.507152] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [187.507282] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [187.507830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.507992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.508131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.508264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.549928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [187.571826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [187.571834] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.571974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [187.601490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [187.601496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [187.601618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.601825] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:106:HDMI-A-3] Same epoch counter 1 <7> [187.601859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-4] <7> [187.601996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.652960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [187.676561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.676571] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.676795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.702574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.702579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.702699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.702961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:112:HDMI-A-4] Same epoch counter 1 <7> [187.702983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-6] <7> [187.703147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.703628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.703781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:116:DP-6] Same epoch counter 1 <7> [187.703828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-5] <7> [187.703975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.755021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [187.778047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [187.778057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.778233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [187.802914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [187.802920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [187.803048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.803187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-5] Same epoch counter 1 <7> [187.939437] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=0 ret=0 en=0 <7> [187.939975] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=1 ret=0 en=0 <7> [187.940386] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=2 ret=0 en=0 <7> [187.940750] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=3 ret=0 en=0 <7> [187.941562] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=4 ret=0 en=0 <7> [187.941979] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=5 ret=0 en=0 <7> [188.100131] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [188.171787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.172169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.172800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.173487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.174082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [188.174410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [188.174734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [188.175081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [188.210589] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [188.279605] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [188.572383] amdgpu 0000:01:00.0: [drm:drm_client_release] fbdev <6> [188.584750] amdgpu 0000:01:00.0: amdgpu: amdgpu: finishing device. <7> [188.595105] [drm:amdgpu_dm_irq_fini [amdgpu]] DM_IRQ: releasing resources. <6> [188.903270] [drm] amdgpu: ttm finalized <7> [189.578410] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [189.578645] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [189.578915] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [189.579107] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [189.579383] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [189.579510] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [189.580205] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [189.580324] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [189.580435] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6> [189.580545] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [189.581421] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [189.581430] i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup <7> [189.581833] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7c45b018 <7> [189.582009] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [189.582155] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [189.582298] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [189.582442] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [189.587185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [189.587423] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [189.587571] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [189.587717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [189.587952] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [189.588107] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [189.588220] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [189.588351] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [189.588515] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no <7> [189.588624] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [189.588761] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [189.588925] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [189.589047] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [189.589169] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [189.589780] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [189.590064] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212 <7> [189.590292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [189.590539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [189.590845] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [189.591160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [189.591381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [189.591601] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [189.591910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [189.592149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [189.592395] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [189.592620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78) <7> [189.592924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [189.593230] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [189.593440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [189.593681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [189.593986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [189.594261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [189.594480] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [189.594692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [189.595012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [189.595316] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [189.595560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8 <7> [189.595839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [189.596129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [189.596357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [189.596591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [189.596855] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [189.597139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.597445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [189.597705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [189.597970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [189.598777] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [189.599076] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [189.599306] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [189.599613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.599877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.600204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [189.600448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.600767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [189.601072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [189.601286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [189.601601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [189.601983] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [189.603259] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [189.603679] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [189.603934] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [189.604099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [189.604299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [189.604463] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [189.604611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [189.604796] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <6> [189.604976] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [189.605005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [189.605146] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [189.605287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [189.607034] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [189.608352] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [189.608629] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [189.608822] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [189.611667] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [189.611967] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [189.612138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [189.612292] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [189.612452] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [189.612607] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [189.612779] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [189.612951] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [189.613104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [189.613258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [189.613411] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [189.613616] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [189.613832] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [189.613977] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [189.614115] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [189.614254] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [189.614392] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [189.614594] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [189.615000] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [189.615152] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [189.615346] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [189.615490] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [189.615666] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [189.615875] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [189.834867] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.845873] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.856877] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.867883] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.878888] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.889895] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.900900] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.911905] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.922909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.933917] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.944921] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.955927] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.966932] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.977939] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.988944] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [189.999948] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.010954] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.021961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.032965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.043970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.054976] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.065983] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.076987] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.087993] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.098998] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.110005] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.121008] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.132015] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.143019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.154026] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.165029] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.176037] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [190.176226] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [190.176250] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [190.176320] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [190.176523] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [190.176735] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [190.176894] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [190.177477] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [190.177625] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [190.177820] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [190.178185] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:111:DDI C/PHY C] using AUX C (platform default) <7> [190.178351] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:111:DDI C/PHY C] <7> [190.178507] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:111:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [190.178750] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:115:DDI D/PHY D] using AUX D (VBT) <7> [190.178898] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:115:DDI D/PHY D] <7> [190.179460] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [190.179609] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:115:DDI D/PHY D] <7> [190.179743] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:115:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [190.179968] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [190.180527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [190.180703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [190.180873] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [190.181086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [190.181337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [190.181488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [190.181636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [190.181801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [190.181950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [190.182170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [190.182391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [190.182540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [190.182689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [190.182830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [190.182970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [190.183247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [190.183552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DDI C/PHY C] hw state readout: disabled, pipe A <7> [190.183744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DDI D/PHY D] hw state readout: disabled, pipe A <7> [190.183885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST A] hw state readout: disabled, pipe A <7> [190.184024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST B] hw state readout: disabled, pipe B <7> [190.184289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST C] hw state readout: disabled, pipe C <7> [190.184498] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [190.184652] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [190.184819] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [190.184971] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [190.185286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [190.185478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:HDMI-A-1] hw state readout: disabled <7> [190.185698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-2] hw state readout: disabled <7> [190.185856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:DP-2] hw state readout: disabled <7> [190.186012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:122:HDMI-A-3] hw state readout: disabled <7> [190.186262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [190.186462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [190.186616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [190.186756] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [190.186906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [190.187123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [190.187342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [190.187553] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [190.187733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [190.187880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [190.188065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [190.188317] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [190.188518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [190.188667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [190.188831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [190.189026] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [190.189296] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [190.189481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [190.189649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [190.189826] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [190.189939] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [190.190144] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [190.190439] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [190.191613] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [190.191836] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [190.192027] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [190.206385] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [190.206650] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [190.206790] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [190.206928] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [190.207126] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [190.207352] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [190.207877] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [190.207992] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [190.208164] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [190.208286] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [190.213999] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [190.215012] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [190.215465] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:HDMI-A-1] generating connector hotplug event <7> [190.215903] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-2] generating connector hotplug event <7> [190.216333] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-2 <7> [190.217063] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:DP-2] generating connector hotplug event <7> [190.217467] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:122:HDMI-A-3] generating connector hotplug event <6> [190.217524] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [190.219617] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [190.239339] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [190.242444] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input31 <7> [190.243641] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [190.244242] [drm:drm_client_modeset_probe] <7> [190.244237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [190.244335] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [190.244363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.244455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [190.244683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [190.244896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [190.245252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.245311] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [190.245464] i915 device info: pciid=0x591b rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [190.245468] i915 device info: graphics version: 9 <7> [190.245470] i915 device info: media version: 9 <7> [190.245472] i915 device info: display version: 9 <7> [190.245474] i915 device info: graphics stepping: F0 <7> [190.245478] i915 device info: media stepping: F0 <7> [190.245480] i915 device info: display stepping: C0 <7> [190.245482] i915 device info: base die stepping: ** <7> [190.245484] i915 device info: gt: 2 <7> [190.245486] i915 device info: memory-regions: 0x21 <7> [190.245487] i915 device info: page-sizes: 0x11000 <7> [190.245489] i915 device info: platform: KABYLAKE <7> [190.245490] i915 device info: ppgtt-size: 48 <7> [190.245492] i915 device info: ppgtt-type: 2 <7> [190.245494] i915 device info: dma_mask_size: 39 <7> [190.245496] i915 device info: is_mobile: no <7> [190.245498] i915 device info: is_lp: no <7> [190.245500] i915 device info: require_force_probe: no <7> [190.245502] i915 device info: is_dgfx: no <7> [190.245504] i915 device info: has_64bit_reloc: yes <7> [190.245506] i915 device info: has_64k_pages: no <7> [190.245508] i915 device info: gpu_reset_clobbers_display: no <7> [190.245510] i915 device info: has_reset_engine: yes <7> [190.245512] i915 device info: has_3d_pipeline: yes <7> [190.245514] i915 device info: has_4tile: no <7> [190.245516] i915 device info: has_flat_ccs: no <7> [190.245518] i915 device info: has_global_mocs: no <7> [190.245520] i915 device info: has_gmd_id: no <7> [190.245522] i915 device info: has_gt_uc: yes <7> [190.245524] i915 device info: has_heci_pxp: no <7> [190.245526] i915 device info: has_heci_gscfi: no <7> [190.245528] i915 device info: has_guc_deprivilege: no <7> [190.245530] i915 device info: has_l3_ccs_read: no <7> [190.245532] i915 device info: has_l3_dpf: no <7> [190.245534] i915 device info: has_llc: yes <7> [190.245536] i915 device info: has_logical_ring_contexts: yes <7> [190.245538] i915 device info: has_logical_ring_elsq: no <7> [190.245540] i915 device info: has_media_ratio_mode: no <7> [190.245542] i915 device info: has_mslice_steering: no <7> [190.245544] i915 device info: has_oa_bpc_reporting: no <7> [190.245546] i915 device info: has_oa_slice_contrib_limits: no <7> [190.245548] i915 device info: has_oam: no <7> [190.245549] i915 device info: has_one_eu_per_fuse_bit: no <7> [190.245551] i915 device info: has_pxp: no <7> [190.245553] i915 device info: has_rc6: yes <7> [190.245555] i915 device info: has_rc6p: no <7> [190.245557] i915 device info: has_rps: yes <7> [190.245559] i915 device info: has_runtime_pm: yes <7> [190.245561] i915 device info: has_snoop: no <7> [190.245563] i915 device info: has_coherent_ggtt: yes <7> [190.245565] i915 device info: tuning_thread_rr_after_dep: no <7> [190.245567] i915 device info: unfenced_needs_alignment: no <7> [190.245569] i915 device info: hws_needs_physical: no <7> [190.245571] i915 device info: has_pooled_eu: no <7> [190.245573] i915 device info: cursor_needs_physical: no <7> [190.245575] i915 device info: has_cdclk_crawl: no <7> [190.245577] i915 device info: has_cdclk_squash: no <7> [190.245579] i915 device info: has_ddi: yes <7> [190.245581] i915 device info: has_dp_mst: yes <7> [190.245583] i915 device info: has_dsb: no <7> [190.245584] i915 device info: has_fpga_dbg: yes <7> [190.245586] i915 device info: has_gmch: no <7> [190.245588] i915 device info: has_hotplug: yes <7> [190.245590] i915 device info: has_hti: no <7> [190.245592] i915 device info: has_ipc: yes <7> [190.245594] i915 device info: has_overlay: no <7> [190.245596] i915 device info: has_psr: yes <7> [190.245598] i915 device info: has_psr_hw_tracking: yes <7> [190.245600] i915 device info: overlay_needs_physical: no <7> [190.245602] i915 device info: supports_tv: no <7> [190.245604] i915 device info: has_hdcp: yes <7> [190.245606] i915 device info: has_dmc: yes <7> [190.245608] i915 device info: has_dsc: no <7> [190.245610] i915 device info: rawclk rate: 24000 kHz <7> [190.245612] i915 device info: iommu: enabled <7> [190.245614] i915 device info: available engines: 40403 <7> [190.245616] i915 device info: slice total: 1, mask=0001 <7> [190.245619] i915 device info: subslice total: 3 <7> [190.245621] i915 device info: slice0: 3 subslices, mask=00000007 <7> [190.245623] i915 device info: slice1: 0 subslices, mask=00000000 <7> [190.245625] i915 device info: slice2: 0 subslices, mask=00000000 <7> [190.245627] i915 device info: EU total: 24 <7> [190.245629] i915 device info: EU per subslice: 8 <7> [190.245631] i915 device info: has slice power gating: no <7> [190.245633] i915 device info: has subslice power gating: no <7> [190.245635] i915 device info: has EU power gating: yes <6> [190.245637] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [190.245640] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [190.245642] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [190.245682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.245915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.246163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.246847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.247301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [190.247328] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [190.247343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] <7> [190.247356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1] <7> [190.247573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.299173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 <7> [190.323794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [190.323802] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.323962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [190.350617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [190.350624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [190.350772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.350940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] status updated from unknown to disconnected <7> [190.350963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] disconnected <7> [190.350977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] <7> [190.350989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2] <7> [190.351198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.402219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 <7> [190.433895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.433901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.434038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.466904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.466910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.467048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.467289] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] status updated from unknown to disconnected <7> [190.467333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] disconnected <7> [190.467371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] <7> [190.467404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2] <7> [190.467635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.468213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.468406] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] status updated from unknown to disconnected <7> [190.468425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] disconnected <7> [190.468455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] <7> [190.468468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3] <7> [190.468661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.520394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6 <7> [190.545094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [190.545104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.545339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [190.573959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [190.573965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [190.574105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.574369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] status updated from unknown to disconnected <7> [190.574413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] disconnected <7> [190.574451] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [190.574457] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [190.574463] [drm:drm_client_modeset_probe] connector 106 enabled? no <7> [190.574468] [drm:drm_client_modeset_probe] connector 112 enabled? no <7> [190.574485] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [190.574490] [drm:drm_client_modeset_probe] connector 122 enabled? no <7> [190.574543] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [190.574558] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [190.574586] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [190.574623] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [190.575467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.575632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.576142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.576848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.577072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.577268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.577970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.578589] [drm:drm_client_modeset_probe] <7> [190.578668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [190.578692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.579052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.579997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.580241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [190.580265] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] <7> [190.580286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1] <7> [190.580519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <6> [190.588419] snd_hda_intel 0000:01:00.1: Force to non-snoop mode <7> [190.589034] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [190.589840] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [190.590533] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [190.591985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.592632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [190.608822] [IGT] i915_module_load: finished subtest reload, SUCCESS <6> [190.609011] [IGT] i915_module_load: exiting, ret=0

<6> [187.352726] [IGT] i915_module_load: executing

<6> [187.356096] [IGT] i915_module_load: starting subtest reload

<7> [187.490822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [187.496568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-5]

<7> [187.497102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [187.497310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.497463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [187.497954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [187.498483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [187.498698] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [187.498822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-5] Same epoch counter 1

<7> [187.498850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-3]

<7> [187.506197] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [187.506336] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [187.506469] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [187.506601] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [187.506758] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [187.506890] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [187.507021] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [187.507152] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [187.507282] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [187.507830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [187.507992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [187.508131] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [187.508264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [187.549928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [187.571826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [187.571834] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [187.571974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [187.601490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [187.601496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [187.601618] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [187.601825] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:106:HDMI-A-3] Same epoch counter 1

<7> [187.601859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-4]

<7> [187.601996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.652960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [187.676561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [187.676571] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [187.676795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [187.702574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [187.702579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [187.702699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [187.702961] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:112:HDMI-A-4] Same epoch counter 1

<7> [187.702983] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-6]

<7> [187.703147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.703628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [187.703781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:116:DP-6] Same epoch counter 1

<7> [187.703828] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-5]

<7> [187.703975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.755021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [187.778047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [187.778057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [187.778233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [187.802914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [187.802920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [187.803048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [187.803187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:122:HDMI-A-5] Same epoch counter 1

<7> [187.939437] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=0 ret=0 en=0

<7> [187.939975] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=1 ret=0 en=0

<7> [187.940386] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=2 ret=0 en=0

<7> [187.940750] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=3 ret=0 en=0

<7> [187.941562] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=4 ret=0 en=0

<7> [187.941979] [drm:amdgpu_dm_audio_component_get_eld [amdgpu]] Get ELD : idx=5 ret=0 en=0

<7> [188.100131] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [188.171787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [188.172169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [188.172800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [188.173487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [188.174082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [188.174410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [188.174734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [188.175081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [188.210589] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [188.279605] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [188.572383] amdgpu 0000:01:00.0: [drm:drm_client_release] fbdev

<6> [188.584750] amdgpu 0000:01:00.0: amdgpu: amdgpu: finishing device.

<7> [188.595105] [drm:amdgpu_dm_irq_fini [amdgpu]] DM_IRQ: releasing resources.

<6> [188.903270] [drm] amdgpu: ttm finalized

<7> [189.578410] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [189.578645] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [189.578915] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [189.579107] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [189.579383] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [189.579510] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [189.580205] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [189.580324] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [189.580435] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M

<6> [189.580545] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [189.581421] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [189.581430] i915 0000:00:02.0: [drm:init_stolen_smem [i915]] Skip stolen region: failed to setup

<7> [189.581833] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x7c45b018

<7> [189.582009] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [189.582155] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [189.582298] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [189.582442] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [189.587185] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [189.587423] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [189.587571] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [189.587717] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [189.587952] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [189.588107] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [189.588220] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [189.588351] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [189.588515] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X16, ranks: 1, 16Gb DIMMs: no

<7> [189.588624] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [189.588761] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [189.588925] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [189.589047] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [189.589169] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [189.589780] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [189.590064] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212

<7> [189.590292] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [189.590539] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [189.590845] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [189.591160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [189.591381] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [189.591601] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [189.591910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [189.592149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [189.592395] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [189.592620] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 22, min size 78)

<7> [189.592924] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [189.593230] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [189.593440] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [189.593681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [189.593986] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [189.594261] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [189.594480] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [189.594692] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [189.595012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [189.595316] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [189.595560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 8

<7> [189.595839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [189.596129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [189.596357] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [189.596591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [189.596855] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [189.597139] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.597445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [189.597705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [189.597970] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [189.598777] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [189.599076] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [189.599306] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [189.599613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [189.599877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [189.600204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [189.600448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [189.600767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [189.601072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [189.601286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [189.601601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [189.601983] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [189.603259] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [189.603679] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [189.603934] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [189.604099] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [189.604299] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [189.604463] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [189.604611] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [189.604796] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<6> [189.604976] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [189.605005] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [189.605146] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [189.605287] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [189.607034] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [189.608352] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [189.608629] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [189.608822] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [189.611667] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [189.611967] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [189.612138] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [189.612292] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [189.612452] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [189.612607] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [189.612779] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [189.612951] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [189.613104] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [189.613258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [189.613411] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [189.613616] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [189.613832] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [189.613977] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [189.614115] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [189.614254] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [189.614392] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [189.614594] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [189.615000] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [189.615152] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [189.615346] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [189.615490] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [189.615666] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [189.615875] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [189.834867] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.845873] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.856877] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.867883] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.878888] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.889895] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.900900] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.911905] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.922909] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.933917] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.944921] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.955927] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.966932] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.977939] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.988944] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [189.999948] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.010954] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.021961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.032965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.043970] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.054976] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.065983] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.076987] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.087993] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.098998] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.110005] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.121008] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.132015] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.143019] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.154026] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.165029] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.176037] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [190.176226] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [190.176250] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [190.176320] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [190.176523] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [190.176735] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [190.176894] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [190.177477] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [190.177625] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [190.177820] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [190.178185] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:111:DDI C/PHY C] using AUX C (platform default)

<7> [190.178351] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:111:DDI C/PHY C]

<7> [190.178507] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:111:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [190.178750] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:115:DDI D/PHY D] using AUX D (VBT)

<7> [190.178898] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:115:DDI D/PHY D]

<7> [190.179460] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [190.179609] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:115:DDI D/PHY D]

<7> [190.179743] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:115:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [190.179968] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [190.180527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [190.180703] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [190.180873] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [190.181086] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [190.181337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [190.181488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [190.181636] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [190.181801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [190.181950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [190.182170] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [190.182391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [190.182540] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [190.182689] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [190.182830] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [190.182970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [190.183247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [190.183552] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [190.183744] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:115:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [190.183885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:117:DP-MST A] hw state readout: disabled, pipe A

<7> [190.184024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DP-MST B] hw state readout: disabled, pipe B

<7> [190.184289] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DP-MST C] hw state readout: disabled, pipe C

<7> [190.184498] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [190.184652] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [190.184819] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [190.184971] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [190.185286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [190.185478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:106:HDMI-A-1] hw state readout: disabled

<7> [190.185698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:112:HDMI-A-2] hw state readout: disabled

<7> [190.185856] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:DP-2] hw state readout: disabled

<7> [190.186012] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:122:HDMI-A-3] hw state readout: disabled

<7> [190.186262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [190.186462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [190.186616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [190.186756] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [190.186906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [190.187123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [190.187342] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [190.187553] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [190.187733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [190.187880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [190.188065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [190.188317] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [190.188518] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [190.188667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [190.188831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [190.189026] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [190.189296] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [190.189481] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [190.189649] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [190.189826] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [190.189939] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [190.190144] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [190.190439] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [190.191613] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [190.191836] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [190.192027] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [190.206385] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [190.206650] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [190.206790] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [190.206928] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [190.207126] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [190.207352] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [190.207877] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [190.207992] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [190.208164] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [190.208286] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [190.213999] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [190.215012] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [190.215465] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:106:HDMI-A-1] generating connector hotplug event

<7> [190.215903] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:112:HDMI-A-2] generating connector hotplug event

<7> [190.216333] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-2

<7> [190.217063] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:DP-2] generating connector hotplug event

<7> [190.217467] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:122:HDMI-A-3] generating connector hotplug event

<6> [190.217524] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [190.219617] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [190.239339] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [190.242444] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input31

<7> [190.243641] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [190.244242] [drm:drm_client_modeset_probe]

<7> [190.244237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [190.244335] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [190.244363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [190.244455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [190.244683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [190.244896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [190.245252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [190.245311] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [190.245464] i915 device info: pciid=0x591b rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [190.245468] i915 device info: graphics version: 9

<7> [190.245470] i915 device info: media version: 9

<7> [190.245472] i915 device info: display version: 9

<7> [190.245474] i915 device info: graphics stepping: F0

<7> [190.245478] i915 device info: media stepping: F0

<7> [190.245480] i915 device info: display stepping: C0

<7> [190.245482] i915 device info: base die stepping: **

<7> [190.245484] i915 device info: gt: 2

<7> [190.245486] i915 device info: memory-regions: 0x21

<7> [190.245487] i915 device info: page-sizes: 0x11000

<7> [190.245489] i915 device info: platform: KABYLAKE

<7> [190.245490] i915 device info: ppgtt-size: 48

<7> [190.245492] i915 device info: ppgtt-type: 2

<7> [190.245494] i915 device info: dma_mask_size: 39

<7> [190.245496] i915 device info: is_mobile: no

<7> [190.245498] i915 device info: is_lp: no

<7> [190.245500] i915 device info: require_force_probe: no

<7> [190.245502] i915 device info: is_dgfx: no

<7> [190.245504] i915 device info: has_64bit_reloc: yes

<7> [190.245506] i915 device info: has_64k_pages: no

<7> [190.245508] i915 device info: gpu_reset_clobbers_display: no

<7> [190.245510] i915 device info: has_reset_engine: yes

<7> [190.245512] i915 device info: has_3d_pipeline: yes

<7> [190.245514] i915 device info: has_4tile: no

<7> [190.245516] i915 device info: has_flat_ccs: no

<7> [190.245518] i915 device info: has_global_mocs: no

<7> [190.245520] i915 device info: has_gmd_id: no

<7> [190.245522] i915 device info: has_gt_uc: yes

<7> [190.245524] i915 device info: has_heci_pxp: no

<7> [190.245526] i915 device info: has_heci_gscfi: no

<7> [190.245528] i915 device info: has_guc_deprivilege: no

<7> [190.245530] i915 device info: has_l3_ccs_read: no

<7> [190.245532] i915 device info: has_l3_dpf: no

<7> [190.245534] i915 device info: has_llc: yes

<7> [190.245536] i915 device info: has_logical_ring_contexts: yes

<7> [190.245538] i915 device info: has_logical_ring_elsq: no

<7> [190.245540] i915 device info: has_media_ratio_mode: no

<7> [190.245542] i915 device info: has_mslice_steering: no

<7> [190.245544] i915 device info: has_oa_bpc_reporting: no

<7> [190.245546] i915 device info: has_oa_slice_contrib_limits: no

<7> [190.245548] i915 device info: has_oam: no

<7> [190.245549] i915 device info: has_one_eu_per_fuse_bit: no

<7> [190.245551] i915 device info: has_pxp: no

<7> [190.245553] i915 device info: has_rc6: yes

<7> [190.245555] i915 device info: has_rc6p: no

<7> [190.245557] i915 device info: has_rps: yes

<7> [190.245559] i915 device info: has_runtime_pm: yes

<7> [190.245561] i915 device info: has_snoop: no

<7> [190.245563] i915 device info: has_coherent_ggtt: yes

<7> [190.245565] i915 device info: tuning_thread_rr_after_dep: no

<7> [190.245567] i915 device info: unfenced_needs_alignment: no

<7> [190.245569] i915 device info: hws_needs_physical: no

<7> [190.245571] i915 device info: has_pooled_eu: no

<7> [190.245573] i915 device info: cursor_needs_physical: no

<7> [190.245575] i915 device info: has_cdclk_crawl: no

<7> [190.245577] i915 device info: has_cdclk_squash: no

<7> [190.245579] i915 device info: has_ddi: yes

<7> [190.245581] i915 device info: has_dp_mst: yes

<7> [190.245583] i915 device info: has_dsb: no

<7> [190.245584] i915 device info: has_fpga_dbg: yes

<7> [190.245586] i915 device info: has_gmch: no

<7> [190.245588] i915 device info: has_hotplug: yes

<7> [190.245590] i915 device info: has_hti: no

<7> [190.245592] i915 device info: has_ipc: yes

<7> [190.245594] i915 device info: has_overlay: no

<7> [190.245596] i915 device info: has_psr: yes

<7> [190.245598] i915 device info: has_psr_hw_tracking: yes

<7> [190.245600] i915 device info: overlay_needs_physical: no

<7> [190.245602] i915 device info: supports_tv: no

<7> [190.245604] i915 device info: has_hdcp: yes

<7> [190.245606] i915 device info: has_dmc: yes

<7> [190.245608] i915 device info: has_dsc: no

<7> [190.245610] i915 device info: rawclk rate: 24000 kHz

<7> [190.245612] i915 device info: iommu: enabled

<7> [190.245614] i915 device info: available engines: 40403

<7> [190.245616] i915 device info: slice total: 1, mask=0001

<7> [190.245619] i915 device info: subslice total: 3

<7> [190.245621] i915 device info: slice0: 3 subslices, mask=00000007

<7> [190.245623] i915 device info: slice1: 0 subslices, mask=00000000

<7> [190.245625] i915 device info: slice2: 0 subslices, mask=00000000

<7> [190.245627] i915 device info: EU total: 24

<7> [190.245629] i915 device info: EU per subslice: 8

<7> [190.245631] i915 device info: has slice power gating: no

<7> [190.245633] i915 device info: has subslice power gating: no

<7> [190.245635] i915 device info: has EU power gating: yes

<6> [190.245637] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [190.245640] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [190.245642] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [190.245682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [190.245915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.246163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.246847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.247301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [190.247328] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [190.247343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1]

<7> [190.247356] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1]

<7> [190.247573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.299173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5

<7> [190.323794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [190.323802] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [190.323962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [190.350617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [190.350624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [190.350772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.350940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] status updated from unknown to disconnected

<7> [190.350963] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1] disconnected

<7> [190.350977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2]

<7> [190.350989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:112:HDMI-A-2]

<7> [190.351198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.402219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4

<7> [190.433895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [190.433901] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [190.434038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [190.466904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [190.466910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [190.467048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.467289] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] status updated from unknown to disconnected

<7> [190.467333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:112:HDMI-A-2] disconnected

<7> [190.467371] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2]

<7> [190.467404] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:116:DP-2]

<7> [190.467635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.468213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.468406] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] status updated from unknown to disconnected

<7> [190.468425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:DP-2] disconnected

<7> [190.468455] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3]

<7> [190.468468] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:122:HDMI-A-3]

<7> [190.468661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.520394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6

<7> [190.545094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [190.545104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [190.545339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [190.573959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [190.573965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [190.574105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.574369] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] status updated from unknown to disconnected

<7> [190.574413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:122:HDMI-A-3] disconnected

<7> [190.574451] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [190.574457] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [190.574463] [drm:drm_client_modeset_probe] connector 106 enabled? no

<7> [190.574468] [drm:drm_client_modeset_probe] connector 112 enabled? no

<7> [190.574485] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [190.574490] [drm:drm_client_modeset_probe] connector 122 enabled? no

<7> [190.574543] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [190.574558] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [190.574586] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [190.574623] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [190.575467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.575632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [190.576142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [190.576848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [190.577072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [190.577268] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [190.577970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.578589] [drm:drm_client_modeset_probe]

<7> [190.578668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [190.578692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [190.579052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [190.579997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [190.580241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [190.580265] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:106:HDMI-A-1]

<7> [190.580286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:106:HDMI-A-1]

<7> [190.580519] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<6> [190.588419] snd_hda_intel 0000:01:00.1: Force to non-snoop mode

<7> [190.589034] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [190.589840] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [190.590533] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [190.591985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [190.592632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [190.608822] [IGT] i915_module_load: finished subtest reload, SUCCESS

<6> [190.609011] [IGT] i915_module_load: exiting, ret=0

Results for igt@i915_module_load@reload