Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gb7a2382f1 (x86_64) (Linux: 6.5.0-rc5-linus-v6.5-rc5-g52a93d39b17d+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.024s)
Dmesg
<6> [116.100291] Console: switching to colour dummy device 80x25
<6> [116.100678] [IGT] kms_force_connector_basic: executing
<7> [116.103675] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.104116] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [116.104283] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.104720] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.104728] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.104747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.105097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.105227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.105535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.105672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.105677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.105793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.108614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.108619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.108742] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.108783] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.108795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.109142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.109262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.109566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.109699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.109703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.109819] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.113016] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.113021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.113164] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.113310] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [116.113316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.113330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.126420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.126426] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.126651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.126773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.127080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.127225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.127440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.127454] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.127459] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.127463] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.127467] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.127471] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.127474] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.127478] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.127482] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.127485] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.127489] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.127492] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.127496] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.127524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.127537] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.140924] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.140930] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.141160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.141294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.141611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.141755] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.141961] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.141975] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.141980] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.141983] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.141987] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.141990] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.141993] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.141996] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.141999] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.142002] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.142005] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.142009] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.142012] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.142163] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [116.142170] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.142184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.142533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.142665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.142982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.143147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.143152] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.143279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.146104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.146109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.146248] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.146292] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.146305] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.146649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.146778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.147094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.147249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.147252] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.147380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.150190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.150194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.150329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.150380] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.150394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.150737] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.150866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.151184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.151328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.151332] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.151458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.154279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.154283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.154414] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [116.154768] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [116.154902] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [116.154909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.154924] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.155277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.155407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.155723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.155868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.155877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.156005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.158840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.158848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.158978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from disconnected to connected
<7> [116.159120] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [116.159143] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.159149] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.159153] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.159156] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.159160] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.159195] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.159209] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.159584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.159757] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.160142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.160333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.160344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.160514] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.163450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.163461] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.163656] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [116.163670] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.163675] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.163679] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.163682] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.163685] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.163829] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:95:HDMI-A-1] EDID override set
<7> [116.163847] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.163861] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.164005] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD monitor IGT
<7> [116.164010] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD size 24, SAD count 0
<7> [116.164229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [116.164351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.164658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [116.164791] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.164900] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.164905] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [116.164911] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.164915] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [116.164920] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [116.164933] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [116.164936] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [116.164940] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.164943] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.164946] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.164949] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.165055] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:95:HDMI-A-1] EDID override set
<7> [116.165077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.165090] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.165252] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD monitor IGT
<7> [116.165256] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:95:HDMI-A-1] ELD size 24, SAD count 0
<7> [116.165259] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:HDMI-A-1] EDID changed, epoch counter 4
<7> [116.165480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [116.165599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.165904] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [116.166039] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.166154] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [116.166159] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [116.166166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [116.166180] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [116.166184] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.166187] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.166190] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.166193] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.166284] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [116.166305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.166318] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.166661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.166779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.167084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.167231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.167239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.167355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.170250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.170262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.170386] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:95:HDMI-A-1] EDID changed, epoch counter 5
<7> [116.170458] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [116.170462] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [116.170468] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [116.170472] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [116.170477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] probed modes :
<7> [116.170490] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.170494] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.170497] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.170500] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.170503] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.170618] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [116.170623] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.170637] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.170976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.171096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.171419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.171555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.171559] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.171675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.174500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.174504] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.174625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from connected to disconnected
<7> [116.174645] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.174755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.174768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.175186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.175358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.175718] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.175908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.175914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.176083] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.179041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.179047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.179212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<6> [116.179562] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [116.179665] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.180028] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.180035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.180051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.180406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.180525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.180830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.180964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.180968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.181084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.183915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.183920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.184046] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.184089] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.184102] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.184498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.184622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.184927] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.185060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.185063] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.185192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.187992] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.187996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.188181] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.188280] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:95:HDMI-A-1] EDID override reset
<7> [116.188298] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.188312] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.188650] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.188768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.189073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.189217] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.189221] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.189337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.192135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.192139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.192258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.192399] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [116.192404] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.192418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.205613] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.205620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.205844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.205967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.206290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.206425] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.206641] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.206654] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.206660] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.206663] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.206667] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.206670] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.206674] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.206677] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.206681] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.206684] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.206687] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.206691] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.206694] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.206728] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.206741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.219796] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.219801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.220021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.220152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.220458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.220591] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.220792] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.220805] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.220809] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.220813] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.220816] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.220819] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.220822] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.220825] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.220829] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.220832] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.220835] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.220838] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.220841] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.220938] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:104:HDMI-A-2] EDID override reset
<7> [116.220956] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.220969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.234051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.234057] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.234281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.234430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.234747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.234892] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.235097] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.235114] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.235119] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.235123] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.235135] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.235138] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.235142] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.235145] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.235148] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.235151] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.235154] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.235158] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.235161] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.235269] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:108:DP-1] EDID override reset
<7> [116.235287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]
<7> [116.235303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [116.235454] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected
<7> [116.235586] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [116.235592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.235607] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.235957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.236088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.236416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.236561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.236565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.236692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.239521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.239525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.239657] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.239702] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.239715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.240059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.240201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.240516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.240661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.240665] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.240791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.243622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.243626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.243757] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.243849] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:115:HDMI-A-3] EDID override reset
<7> [116.243867] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.243880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.244225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.244357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.244672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.244815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.244819] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.244945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.247759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.247763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.247894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.247998] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:119:DP-2] EDID override reset
<7> [116.248016] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]
<7> [116.248030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [116.248763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [116.249316] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [116.250129] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [116.250141] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [116.250265] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [116.250384] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [116.250503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [116.255873] EDID block 0 is all zeroes
<7> [116.255877] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [116.255881] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255883] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255885] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255887] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255888] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255890] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255892] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255893] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.255900] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [116.256023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [116.256723] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.256845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [116.257438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :
<7> [116.257452] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [116.257456] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.257460] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.257464] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.257467] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<6> [116.258026] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [116.258144] [drm:status_store] [CONNECTOR:95:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.258151] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.258167] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.258510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.258630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.258936] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.259070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.259074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.259228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.262041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.262045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.262175] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.262232] [drm:status_store] [CONNECTOR:104:HDMI-A-2] force updated from 0 to 0 or reprobing
<7> [116.262237] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.262250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.275419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.275425] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.275648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.275778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.276084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.276231] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.276450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.276464] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.276469] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.276473] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.276477] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.276480] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.276484] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.276488] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.276491] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.276495] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.276498] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.276502] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.276506] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.276548] [drm:status_store] [CONNECTOR:115:HDMI-A-3] force updated from 0 to 0 or reprobing
<7> [116.276553] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.276567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.276906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.277025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.277343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.277477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.277482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.277598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.280416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.280420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.280546] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.280728] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [116.293976] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
<7> [116.293991] [drm:drm_client_modeset_probe]
<7> [116.294032] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]
<7> [116.294047] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]
<7> [116.294428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.294559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.294877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.295022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.295026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.295163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.297984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.297989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.298130] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected
<7> [116.298146] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]
<7> [116.298159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]
<7> [116.311275] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B
<7> [116.311282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0
<7> [116.311506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.311628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
<7> [116.311934] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
<7> [116.312069] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [116.312308] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :
<7> [116.312322] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
<7> [116.312327] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9
<7> [116.312332] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [116.312335] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [116.312339] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [116.312343] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [116.312346] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<7> [116.312350] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [116.312354] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.312357] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.312361] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.312364] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.312368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]
<7> [116.312381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]
<7> [116.312521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected
<7> [116.312534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]
<7> [116.312546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]
<7> [116.312881] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.313000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry
<7> [116.313319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)
<7> [116.313453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.313457] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.313573] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1
<7> [116.316393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
<7> [116.316398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0
<7> [116.316518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected
<7> [116.316532] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]
<7> [116.316545] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]
<7> [116.317271] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00
<7> [116.317864] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
<7> [116.318697] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09
<7> [116.318708] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes
<7> [116.318832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
<7> [116.318953] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
<7> [116.319071] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
<5> [116.324605] EDID block 0 is all zeroes
<7> [116.324608] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:
<7> [116.324613] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324615] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324617] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324619] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324623] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324625] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324627] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.324635] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no
<7> [116.324758] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [116.325469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [116.325594] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [116.326245] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :
<7> [116.326259] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa
<7> [116.326264] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.326268] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.326272] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.326275] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.326279] [drm:drm_client_modeset_probe] connector 95 enabled? no
<7> [116.326282] [drm:drm_client_modeset_probe] connector 104 enabled? yes
<7> [116.326284] [drm:drm_client_modeset_probe] connector 108 enabled? no
<7> [116.326287] [drm:drm_client_modeset_probe] connector 115 enabled? no
<7> [116.326289] [drm:drm_client_modeset_probe] connector 119 enabled? yes
<7> [116.326312] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [116.326320] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104
<7> [116.326323] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0
<7> [116.326325] [drm:drm_client_modeset_probe] found mode 1920x1200
<7> [116.326327] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119
<7> [116.326329] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0
<7> [116.326332] [drm:drm_client_modeset_probe] found mode 640x480
<7> [116.326334] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [116.326374] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)
<7> [116.326381] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)
<6> [116.351725] Console: switching to colour frame buffer device 80x30
Created at 2023-08-07 00:00:44