Results for igt@i915_pm_rpm@module-reload

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7a2382f1 (x86_64) (Linux: 6.5.0-rc5-linus-v6.5-rc5-g52a93d39b17d+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest module-reload: SKIP (0.000s)
Err	(i915_pm_rpm:5383) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active Subtest module-reload: SKIP (0.000s)
Dmesg	<6> [169.922759] [IGT] i915_pm_rpm: executing <7> [169.927909] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [169.928316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [169.928334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.928707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [169.928895] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [169.929028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [169.929623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.929936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [169.930017] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [169.930030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.930204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.930718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [169.931257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [169.931840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [169.933395] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.934550] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.935174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [169.935498] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [169.935718] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [169.935890] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [169.936546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.936700] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [169.936766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [169.936779] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.936904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.938689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.938831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.939601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.940059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.940063] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.940213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [169.965990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.965996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [169.966116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.966251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [169.969961] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [169.969977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [169.970112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.970640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.970901] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [169.971522] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [169.971550] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [169.971678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.972144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [169.972684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [169.973232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [169.974342] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [169.975168] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [169.975965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [169.976123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [169.976260] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [169.976394] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [169.977174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [169.977314] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [169.977820] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [169.977835] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [169.977961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [169.979073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.979192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [169.980135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [169.980682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [169.980689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [169.980887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [170.006581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [170.006586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [170.006735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [170.006870] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [170.007176] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [170.007189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [170.007314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [170.007853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [170.008091] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [170.008128] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [170.008145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [170.008324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [170.008886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [170.009389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [170.009966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [170.011155] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [170.011887] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [170.012644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [170.012875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [170.013068] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [170.013251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [170.013906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [170.014114] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [170.014143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [170.014155] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [170.014307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [170.015404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [170.015536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [170.016193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [170.016755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [170.016759] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [170.016898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [170.042603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [170.042620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [170.042735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [170.042869] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [180.423687] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [180.430439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.100022] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.109294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.109844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.110641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.110881] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [181.111932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.112709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.113337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.113821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.114607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.115326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.115702] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.115863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.116480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.116637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.117540] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [181.118965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.143339] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.148777] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.148961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.149141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.149639] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.150211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.150383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.150557] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.151196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.151399] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.152524] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [181.152561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.155378] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.179821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.184905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.185127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.185704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.186271] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.186844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.188651] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.189498] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.190328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.190703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.190896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.191082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.191741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.191959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.191985] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.192163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.193600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.193782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.194488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.194970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.194976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.195098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.220272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.220276] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.220393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.220781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.222296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.224778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.249157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.253820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.253981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.254127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.254592] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.255161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.255300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.255437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.256035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.256224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.257234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.259491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.283704] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.288560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.288720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.289254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.289498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.289524] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.289699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.290219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.290741] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.291307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.292757] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.293601] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.294270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.294508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.294654] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.294797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.295390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.295552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.295570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.295704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.296812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.296937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.297640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.298116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.298121] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.298245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.323359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.323364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.323513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.323724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.324744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.324897] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.326311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.350697] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.354225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.354334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.354851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.355021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.355040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.355168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.355667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.356151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.356772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.357963] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.359067] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.359726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.359920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.360069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.360200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.360799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.361001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.361017] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.361174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.362242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.362358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.363069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.363575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.363580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.363707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.389400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.389405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.389565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.389788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.390784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.390923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.392307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.416715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.421510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.421634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.422109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.422262] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.422282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.422414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.422961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.423426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.424013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.425160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.425870] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.426631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.426789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.426928] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.427062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.427664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.427809] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.427826] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.427952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.429063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.429181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.429879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.430358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.430363] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.430489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.455110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.455115] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.455230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.455373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.456894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.457078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.458459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.482847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.486912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.487019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.487503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.487709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.487729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.487853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.488338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.488850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.489399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.490739] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.491813] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.492580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.492738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.492877] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.493011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.493619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.493773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.493790] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.493937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.494626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.494760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.495458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.495939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.495944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.496061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.520623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.520631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.520763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.520906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.522404] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.522541] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.523922] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.548295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.553259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.553386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.553962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.554136] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.554156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.554283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.554786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.555276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.555834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.557019] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.558146] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.558964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.559123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.559263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.559398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.560018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.560173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.560189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.560312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.561454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.561571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.562755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.563293] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.563299] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.563412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.588558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.588565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.588699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.588842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.590494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.590516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.591919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.616291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.621213] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.621343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.621895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.622054] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.622075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.622199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.622692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.623193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.623752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.624929] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.626025] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.626782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.626943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.627081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.627217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.627817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.627964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.627980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.628108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.629189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.629307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.629994] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.630490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.630498] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.630618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.654631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.654639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.654771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.654915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.656580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.656631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.657955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.682336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.686018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.686118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.686608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.686816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.686836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.686960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.687426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.687956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.688565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.689696] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.690787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.691483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.691641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.691779] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.691914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.692526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.692670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.692687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.692814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.693917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.694035] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.695021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.695506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.695511] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.695627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.720195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.720200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.720317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.720510] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.722093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.722211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.723492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.747915] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.752489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.752598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.753069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.753213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.753232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.753356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.753893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.754391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.754953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.756081] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.757180] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.757946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.758106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.758245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.758381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.758992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.759137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.759153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.759279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.760389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.760528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.761215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.761711] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.761716] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.761832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.785295] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.785300] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.785418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.785577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.786623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.786856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.788145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.812537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.816613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.816729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.817197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.817338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.817356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.817505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.818038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.818581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.819124] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.820359] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.821471] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.822234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.822393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.822553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.822715] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.823303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.823461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.823478] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.823642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.824747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.824891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.825584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.826069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.826074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.826191] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.850244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.850249] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.850366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.850580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.852182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.852318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.853472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.878020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.882833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.882958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.883437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.883640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.883661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.883841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.884325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.884848] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.885386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.886482] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.887484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.888265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.888424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.888585] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.888754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.889342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.889497] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.889516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.889677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.890791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.890935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.891626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.892113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.892118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.892238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.915759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.915764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.915883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.916030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.917066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.917209] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.918508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [181.942930] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [181.946529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [181.946639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.947108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.947250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [181.947269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [181.947393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.947874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [181.948388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [181.948974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [181.950124] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [181.951201] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [181.951970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [181.952131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [181.952269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [181.952405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [181.953015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.953167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [181.953183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [181.953313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [181.954436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.954567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [181.955267] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [181.955775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.955782] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [181.955911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [181.979916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [181.979921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [181.980038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [181.980180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [181.981902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [181.981925] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [181.983270] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.007631] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.011743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.011868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.012346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.012559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.012582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.012710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.013195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.013717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.014282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.015484] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.016491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.017255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.017414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.017578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.017721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.018320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.018485] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.018505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.018632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.019748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.019873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.020575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.021052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.021057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.021173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.046851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.046857] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.046988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.047131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.049166] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.049282] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.050469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.074840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.079707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.079838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.080316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.080504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.080525] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.080654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.081128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.081661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.082203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.083440] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.084479] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.085236] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.085394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.085550] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.085686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.086274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.086417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.086433] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.086569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.087672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.087791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.088485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.088961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.088966] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.089082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.116411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.116416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.116574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.116770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.118289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.118407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.119820] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.144216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.148485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.148594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.149065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.149209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.149228] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.149354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.149855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.150363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.150932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.152067] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.152885] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.153657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.153816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.153954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.154089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.154703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.154854] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.154870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.154993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.156106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.156251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.156948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.157432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.157437] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.157594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.185427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.185432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.185606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.185791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.187338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.187491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.189825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.214186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.218508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.218617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.219084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.219229] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.219248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.219372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.219861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.220371] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.220951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.222050] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.222982] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.223739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.223899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.224038] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.224172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.224800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.224949] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.224965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.225091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.226193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.226325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.227508] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.228038] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.228043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.228156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.255432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.255436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.255571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.255758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.257278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.257394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.258801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.283165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.288637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.288757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.289224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.289363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.289382] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.289584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.290086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.290636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.291151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.292398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.293480] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.294242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.294402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.294562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.294703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.295291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.295434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.295467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.295601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.296714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.296839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.297541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.298018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.298023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.298139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.324322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.324326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.324442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.324669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.326206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.326322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.327472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.351841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.357259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.357388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.357921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.358074] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.358095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.358220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.358733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.359217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.359823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.360923] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.362016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.362783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.362943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.363082] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.363217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.363820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.363973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.363989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.364118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.365216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.365335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.366037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.366555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.366563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.366691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.390757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.390762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.390877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.391020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.392060] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.392206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.393513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.417921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.422490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.422597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.423069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.423212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.423231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.423355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.423869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.424351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.424956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.426197] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.427293] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.428061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.428222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.428360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.428515] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.429122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.429267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.429283] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.429409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.430546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.430666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.431363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.431850] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.431858] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.431982] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.457111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.457116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.457231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.457374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.458912] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.459116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.460488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.484839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.489703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.489827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.490306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.490502] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.490529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.490699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.491169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.491693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.492255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.493365] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.494475] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.495105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.495265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.495404] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.495568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.496171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.496314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.496330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.496465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.497573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.497753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.498483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.499494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.499500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.499623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.525822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.525827] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.525956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.526099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.527600] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.527773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.529108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.553440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.558392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.558543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.559019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.559183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.559204] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.559336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.559864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.560370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.560929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.562083] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.563191] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.563995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.564154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.564294] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.564430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.565046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.565194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.565211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.565333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.566484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.566602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.567312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.567801] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.567808] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.567959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.592008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.592013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.592128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.592271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.594410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.594433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.595790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.620180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.624505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.624613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.625080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.625225] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.625245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.625371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.625887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.626397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.626976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.628069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.628886] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.629653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.629812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.629952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.630086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.630711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.630859] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.630876] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.630999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.632106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.632251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.633418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.633960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.633965] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.634079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.661388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.661392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.661551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.661749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.663272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.663388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.664500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.688874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.693723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.693857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.694335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.694533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.694575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.694707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.695192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.695736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.696253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.697347] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.698441] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.699215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.699375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.699533] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.699676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.700264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.700409] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.700425] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.700567] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.701677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.701805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.702492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.702962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.702967] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.703082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.728221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.728226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.728342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.728543] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.730084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.730207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.731515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.755921] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.760492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.760599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.761070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.761213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.761232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.761355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.761841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.762350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.762919] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.764017] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.765115] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.765864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.766023] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.766162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.766297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.766909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.767062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.767079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.767207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.768315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.768437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.769146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.769644] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.769663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.769785] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.795994] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.795998] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.796114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.796257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.797838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.797959] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.799336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.823713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.829109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.829254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.829782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.829953] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.829975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.830099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.830600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.831108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.831677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.832934] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.834026] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.834792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.834953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.835091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.835226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.835827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.835980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.835996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.836125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.837232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.837351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.838055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.838545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.838552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.838678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.863790] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.863795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.863914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.864059] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.865702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.865725] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.867164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.891529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.895695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.895817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.896296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.896463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.896515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.896663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.897132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.897670] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.898233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.899486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.900492] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.901256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.901415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.901578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.901719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.902319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.902483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.902503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.902629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.903727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.903855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.904555] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.905036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.905041] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.905157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.929208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.929212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.929327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.929526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.931065] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.931184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.932515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.956922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.961497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.961604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.962071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.962214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.962234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.962358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.962844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.963353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.963921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.965024] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.966118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.966864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.967022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.967161] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.967295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.967912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.968063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.968080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.968205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.969315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.969437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.970149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.970659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.970682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.970805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.995915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.995919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.996037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.996183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.997693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.997837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.999167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.023553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.027192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.027314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.027841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.027992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.028011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.028139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.028669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.029124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.029749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.030816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.031908] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.032651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.032809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.032948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.033083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.033685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.033839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.033856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.033984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.035086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.035205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.035894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.036367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.036372] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.036507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.062211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.062216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.062332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.062516] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.064069] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.064217] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.065485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.089849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.094686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.094811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.095289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.095442] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.095490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.095652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.096142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.096664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.097229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.098483] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.099482] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.100272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.100431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.100592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.100723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.101307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.101454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.101471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.101596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.102685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.102801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.103526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.103978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.103983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.104095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.127570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.127587] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.127701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.127843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.129466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.129511] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.130858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.155256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.160132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.160259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.160754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.160910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.160932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.161068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.161557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.162064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.162632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.163886] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.164683] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.165460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.165620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.165758] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.165893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.166497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.166640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.166657] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.166784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.167884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.168002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.168702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.169186] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.169191] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.169304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.196094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.196098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.196216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.196362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.197881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.198021] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.199364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.223717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.229535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.229658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.230121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.230262] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.230281] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.230401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.230944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.231441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.232000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.233163] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.233987] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.234750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.234909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.235047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.235182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.235817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.235988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.236005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.236128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.236872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.236989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.237736] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.238214] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.238219] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.238332] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.265642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.265647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.265776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.265918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.267417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.267619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.268965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.293316] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.298253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.298382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.298908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.299067] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.299088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.299212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.299704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.300208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.300778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.302024] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.303114] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.303855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.304014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.304153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.304287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.304886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.305032] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.305048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.305174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.306246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.306365] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.307064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.307573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.307580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.307702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.333366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.333371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.333528] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.333725] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.335265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.335384] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.337814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.362211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.367376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.367536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.368008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.368153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.368172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.368296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.368777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.369281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.369893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.371065] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.372186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.372956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.373116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.373255] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.373390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.373998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.374168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.374185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.374312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.375383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.375509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.376197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.376728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.376735] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.376895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.401526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.401544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.401661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.401804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.403321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.403506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.404919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.429315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.434238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.434366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.434895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.435070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.435090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.435230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.435749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.436213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.436782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.438069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.439195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.439967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.440128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.440266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.440402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.441005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.441175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.441191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.441318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.442439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.442576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.443263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.443750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.443755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.443898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.470135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.470141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.470258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.470402] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.472086] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.472109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.473516] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.497876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.502726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.502861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.503339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.503547] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.503587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.503740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.504224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.504768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.505285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.506393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.507479] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.508239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.508398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.508551] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.508711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.509299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.509444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.509474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.509641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.510724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.510870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.511565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.512050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.512055] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.512172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.537341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.537346] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.537516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.537707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.539235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.539372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.541822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.566221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.570487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.570598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.571070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.571213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.571232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.571355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.571884] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.572367] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.572946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.574068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.575026] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.575795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.575955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.576093] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.576226] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.576840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.577012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.577029] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.577156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.578237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.578357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.579060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.579549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.579556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.579697] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.603778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.603783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.603902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.604049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.605626] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.605762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.607157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.631581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.635701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.635808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.636279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.636424] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.636442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.636580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.637117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.637660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.638221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.639407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.640352] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.641112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.641270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.641409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.641559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.642158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.642303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.642319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.642446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.643540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.643659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.644334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.644855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.644861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.644977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.669012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.669017] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.669132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.669274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.670908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.670930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.672300] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.696698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.701568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.701699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.702178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.702330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.702351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.702531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.703074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.703613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.704161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.705293] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.706388] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.707154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.707313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.707469] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.707606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.708205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.708350] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.708366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.708511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.709604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.709752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.710441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.710914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.710921] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.711058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.735664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.735669] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.735789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.735935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.736973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.737164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.738512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.762885] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.767484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.767610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.768089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.768241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.768262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.768396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.768900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.769399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.769979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.771096] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.772198] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.772967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.773127] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.773266] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.773400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.774017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.774184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.774202] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.774328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.775416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.775544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.776238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.776734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.776741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.776883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.804240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.804245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.804362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.804585] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.805629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.805780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.807172] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.831532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.835652] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.835756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.836226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.836369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.836388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.836525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.837059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.837603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.838149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.839302] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.840401] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.841172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.841331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.841485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.841621] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.842214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.842358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.842375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.842515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.843583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.843702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.844391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.844901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.844906] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.845025] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.869048] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.869053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.869169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.869313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.870879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.871012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.872356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.896630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.902055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.902189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.902692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.902872] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.902892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.903021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.903501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.904008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.904577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.905819] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.906917] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.907692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.907850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.907989] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.908124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.908719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.908891] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.908907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.909033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.910142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.910263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.910958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.911427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.911432] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.911560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.935035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.935040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.935162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.935308] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.936884] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.937026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.938375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.962769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.968216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.968349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.968870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.969057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.969077] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.969201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.969712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.970208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.970814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.972088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.973195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.973965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.974125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.974263] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.974398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.975009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.975189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.975205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.975331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.976421] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.976549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.977240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.977748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.977755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.977876] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.004682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.004687] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.004835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.004977] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.006505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.006679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.008066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.032485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.036042] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.036141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.036683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.036868] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.036887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.037011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.037514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.038006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.038590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.039889] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.040981] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.041736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.041895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.042034] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.042169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.042782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.042926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.042943] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.043068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.044136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.044254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.044941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.045456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.045462] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.045581] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.070194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.070199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.070315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.070507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.071564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.071729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.073111] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.096705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.101460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.101613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.102089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.102241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.102261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.102393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.102925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.103408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.103999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.105152] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.106200] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.106966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.107126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.107264] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.107399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.108016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.108186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.108203] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.108332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.109422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.109559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.110253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.110762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.110769] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.110907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.136668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.136673] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.136790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.136934] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.138432] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.138639] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.140020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.164378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.167946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.168049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.168529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.168703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.168723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.168853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.169323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.169838] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.170400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.171490] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.172488] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.173271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.173429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.173586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.173747] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.174346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.174500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.174522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.174678] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.175769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.175914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.176641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.177125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.177130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.177249] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.202932] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.202940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.203071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.203215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.204763] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.204901] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.206145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.230506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.234010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.234115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.234597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.234830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.234850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.234974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.235442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.235972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.236566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.237732] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.238812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.239576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.239755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.239918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.240048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.240662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.240806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.240823] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.240951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.242052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.242171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.242869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.243372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.243377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.243502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.268126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.268131] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.268247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.268389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.269904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.270071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.271498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.295914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.300493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.300602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.301069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.301213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.301231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.301355] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.301845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.302360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.302951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.304083] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.305207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.305977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.306136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.306274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.306409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.307022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.307191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.307208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.307334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.308430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.308570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.309271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.309773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.309781] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.309899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.332847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.332853] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.332971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.333118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.334748] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.334770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.336176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.360542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.364130] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.364238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.364719] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.364891] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.364911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.365036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.365564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.366027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.366613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.367895] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.368981] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.369735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.369895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.370034] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.370168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.370769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.370915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.370932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.371058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.372117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.372236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.372928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.373397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.373402] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.373532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.399167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.399172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.399287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.399430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.401019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.401163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.402515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.426654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.431468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.431592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.432068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.432220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.432240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.432375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.432908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.433392] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.433983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.435158] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.436199] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.436964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.437125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.437264] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.437398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.438015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.438184] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.438201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.438328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.439412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.439542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.440245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.440740] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.440745] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.440862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.468720] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.468725] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.468855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.468998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.470548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.470716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.472062] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.496417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.500013] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.500114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.500610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.500806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.500826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.500951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.501419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.501951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.502542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.503815] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.504773] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.505404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.505622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.505777] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.505924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.506550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.506729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.506745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.506881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.508004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.508133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.508871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.509343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.509348] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.509505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.535213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.535218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.535335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.535536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.537099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.537214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.538456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.562845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.568258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.568385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.568946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.569135] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.569156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.569284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.569785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.570300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.570874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.572165] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.573260] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.574026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.574186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.574325] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.574473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.575086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.575231] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.575248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.575374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.576471] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.576591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.577283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.577794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.577801] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.577922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.603072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.603077] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.603194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.603337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.604853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.605020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.606380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.630742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.636139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.636271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.636789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.636984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.637003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.637128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.637646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.638120] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.638727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.640028] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.640977] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.641737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.641898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.642038] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.642173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.642784] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.642955] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.642972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.643099] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.644202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.644322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.644976] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.645498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.645503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.645620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.670198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.670203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.670319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.670512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.671668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.671690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.673037] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.697425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.701505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.701608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.702079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.702223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.702242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.702366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.702847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.703362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.703944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.705088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.706186] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.706952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.707111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.707250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.707385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.707985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.708130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.708146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.708275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.709339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.709476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.710168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.710700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.710705] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.710825] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.733812] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.733818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.733937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.734083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.735120] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.735264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.736471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.760846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.765689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.765822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.766302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.766494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.766523] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.766700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.767169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.767707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.768256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.769398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.770480] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.771268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.771428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.771585] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.771757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.772357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.772522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.772539] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.772693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.773783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.773929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.774620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.775106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.775111] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.775228] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.799240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.799245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.799362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.799529] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.801108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.801246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.802456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.826845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.831721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.831854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.832335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.832518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.832554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.832722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.833207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.833729] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.834267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.835414] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.836484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.837247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.837407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.837557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.837719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.838307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.838461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.838478] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.838632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.839724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.839877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.840571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.841069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.841074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.841194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.866299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.866304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.866422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.866646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.868199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.868337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.869503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.893877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.898761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.898893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.899372] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.899581] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.899614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.899782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.900267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.900803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.901328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.902445] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.903407] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.904020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.904180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.904319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.904473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.905097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.905240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.905256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.905379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.906992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.907109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.908332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.908851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.908856] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.908970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.932439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.932444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.932577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.932785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.934312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.934472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.935924] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.960314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.965239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.965367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.965884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.966088] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.966109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.966238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.966727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.967244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.967803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.969068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.970190] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.970957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.971116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.971254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.971389] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.971991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.972168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.972185] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.972313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.973404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.973533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.974225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.974711] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.974718] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.974869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.998342] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.998347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.998506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.998692] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.000199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.000336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.001500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.025872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.030501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.030610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.031080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.031225] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.031245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.031370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.031883] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.032379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.032971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.034118] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.035202] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.035877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.036037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.036175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.036312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.036911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.037081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.037098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.037227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.038308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.038429] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.039130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.039614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.039621] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.039774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.064402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.064407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.064563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.064779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.066307] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.066469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.067876] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.092271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.097158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.097288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.097780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.097997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.098018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.098144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.098632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.099138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.099712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.100817] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.101911] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.102652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.102812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.102951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.103085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.103681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.103853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.103870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.103996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.105076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.105196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.105897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.106377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.106382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.106510] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.131113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.131118] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.131234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.131377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.132589] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.132613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.133987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.158384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.161945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.162045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.162526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.162766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.162785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.162912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.163381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.163910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.164488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.165816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.166914] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.167652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.167812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.167951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.168085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.168691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.168861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.168878] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.169004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.170085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.170207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.170906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.171387] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.171393] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.171520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.197239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.197244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.197362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.197558] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.199112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.199246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.200457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.224847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.228376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.228495] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.228970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.229117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.229137] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.229263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.229748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.230251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.230833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.232122] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.233201] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.233969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.234129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.234268] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.234402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.235020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.235190] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.235207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.235332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.236428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.236556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.237246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.237768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.237773] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.237925] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.263074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.263080] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.263202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.263349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.264997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.265020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.266367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.290744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.295459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.295585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.296063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.296216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.296236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.296370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.296927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.297425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.298003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.299186] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.300016] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.300654] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.300813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.300951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.301087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.301695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.301853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.301870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.302021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.303104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.303224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.303902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.304386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.304391] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.304519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.332401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.332406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.332565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.332783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.334321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.334483] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.335868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.360227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.364830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.364966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.365461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.365644] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.365665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.365794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.366266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.366789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.367353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.368485] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.369484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.370261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.370422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.370575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.370734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.371333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.371488] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.371506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.371677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.372758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.372903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.373602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.374082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.374087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.374203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.397141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.397146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.397263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.397406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.398967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.399096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.400498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.424809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.428319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.428429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.428923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.429094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.429113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.429240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.429724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.430227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.430807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.432069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.433195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.433963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.434122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.434261] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.434397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.435000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.435177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.435195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.435321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.436396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.436528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.437219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.437750] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.437757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.437915] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.464139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.464145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.464267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.464412] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.466099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.466122] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.467513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.491924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.495993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.496128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.496631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.496874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.496894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.497019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.497513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.498015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.498618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.499784] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.500812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.501580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.501753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.501893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.502029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.502626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.502794] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.502811] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.502938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.504037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.504157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.504869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.505365] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.505371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.505498] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.531160] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.531165] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.531281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.531424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.532988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.533120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.534512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.558910] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.563794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.563961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.564441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.564606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.564653] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.564835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.565316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.565831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.566380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.567486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.568487] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.569267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.569427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.569605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.569764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.570369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.570551] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.570588] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.570759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.571839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.571995] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.573220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.573820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.573825] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.573989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.599127] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.599132] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.599250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.599393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.600477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.600613] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.601986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.626356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.630425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.630533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.631003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.631146] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.631166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.631290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.631769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.632276] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.632860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.634023] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.635117] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.635899] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.636060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.636199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.636333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.636937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.637114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.637131] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.637260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.638333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.638486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.639179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.639717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.639723] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.639875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.663358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.663363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.663494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.663702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.665208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.665344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.666503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.690865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.695743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.695875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.696353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.696534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.696562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.696754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.697224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.697748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.698311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.699427] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.700484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.701277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.701436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.701598] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.701764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.702360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.702539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.702555] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.702703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.704284] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.704476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.705179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.705698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.705706] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.705864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.731543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.731548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.731679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.731823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.733315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.733486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.734867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.759208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.763495] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.763603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.764073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.764216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.764235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.764359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.764897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.765382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.765958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.767123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.768227] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.769025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.769185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.769324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.769485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.770141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.770283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.770299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.770422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.772036] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.772168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.772863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.773384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.773389] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.773527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.797658] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.797664] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.797793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.797936] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.799579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.799614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.801018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.825411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.829550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.829680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.830160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.830301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.830320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.830441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.830979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.831493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.832041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.833192] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.833990] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.834760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.834920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.835059] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.835193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.835840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.836020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.836037] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.836160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.837270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.837402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.838362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.838864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.838870] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.838983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.862513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.862518] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.862638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.862784] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.864290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.864431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.865814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.890175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.894846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.894979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.895467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.895696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.895718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.895846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.896317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.896845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.897396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.898485] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.899485] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.900266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.900426] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.900578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.900739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.901328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.901483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.901500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.901656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.902709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.902853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.903554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.904046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.904051] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.904169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.927714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.927719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.927836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.927980] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.929023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.929191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.930514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.954897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.958971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.959079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.959559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.959767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.959786] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.959914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.960399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.960916] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.961470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.962651] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.963749] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.964487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.964677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.964813] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.964945] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.965565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.965761] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.965778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.965905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.966973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.967102] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.967801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.968300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.968305] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.968423] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.995237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.995243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.995359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.995575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.997123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.997260] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.998519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.022895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.028274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.028424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.028977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.029165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.029185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.029313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.029833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.030320] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.030885] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.032208] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.033305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.034075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.034234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.034373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.034522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.035136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.035283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.035300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.035426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.036534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.036654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.037354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.037834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.037841] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.037976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.065321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.065327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.065444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.065611] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.066713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.066838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.068164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.092558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.096699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.096822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.097302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.097463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.097509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.097681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.098152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.098688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.099241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.100384] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.101328] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.102094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.102253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.102392] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.102539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.103152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.103297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.103314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.103440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.104542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.104662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.105349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.105864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.105870] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.106010] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.132258] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.132263] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.132379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.132579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.133627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.133799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.135176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.159567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.163167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.163292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.163777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.163992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.164012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.164137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.164630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.165121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.165725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.166984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.168065] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.168854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.169015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.169153] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.169288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.169891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.170063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.170081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.170207] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.171289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.171411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.172120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.172637] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.172644] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.172794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.199530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.199536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.199711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.199856] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.201373] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.201603] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.202979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.227337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.230956] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.231069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.231560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.231800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.231819] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.231945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.232414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.232943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.233514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.234686] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.235783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.236490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.236664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.236803] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.236938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.237547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.237706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.237723] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.237875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.238986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.239126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.239831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.240312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.240318] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.240436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.266133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.266138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.266255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.266397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.267925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.268090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.269515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.293887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.298733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.298867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.299343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.299525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.299560] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.299729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.300214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.300756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.301274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.302486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.303486] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.304267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.304427] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.304581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.304740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.305328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.305483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.305500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.305661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.306754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.306899] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.307602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.308090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.308095] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.308212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.332799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.332804] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.332925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.333072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.334634] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.334755] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.336151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.360516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.364074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.364177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.364655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.364858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.364878] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.365005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.365506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.365998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.366572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.367816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.368915] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.369653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.369822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.369975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.370110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.370718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.370878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.370895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.371052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.372132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.372253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.372947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.373430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.373435] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.373564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.399318] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.399323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.399439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.399656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.401235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.401372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.402500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.426878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.431731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.431864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.432343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.432525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.432561] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.432728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.433213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.433733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.434274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.435418] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.436484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.437247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.437407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.437558] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.437719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.438307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.438459] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.438476] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.438630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.439723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.439870] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.440570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.441037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.441043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.441160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.466278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.466283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.466415] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.466631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.468167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.468306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.469470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.493844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.498725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.498860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.499339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.499520] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.499556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.499724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.500209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.500751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.501270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.502372] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.503482] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.504245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.504404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.504555] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.504716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.505304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.505457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.505474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.505628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.506711] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.506857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.507554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.508046] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.508052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.508172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.533810] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.533815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.533935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.534081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.535123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.535296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.536470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.560871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.566237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.566388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.566940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.567116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.567136] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.567261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.567791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.568277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.568846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.570035] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.570816] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.571582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.571742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.571882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.572017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.572611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.572782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.572800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.572928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.574026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.574146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.574843] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.575322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.575327] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.575444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.598953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.598958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.599089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.599232] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.600766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.600902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.602151] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.626562] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.630147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.630271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.630782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.630979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.630998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.631122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.631653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.632127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.632743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.633918] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.634982] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.635739] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.635898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.636036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.636171] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.636774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.636945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.636962] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.637088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.638169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.638288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.639000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.639507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.639514] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.639675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.663707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.663712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.663831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.663978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.665004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.665170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.666516] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.690892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.695736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.695870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.696350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.696531] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.696566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.696735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.697219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.697761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.698279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.699397] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.700483] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.701245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.701404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.701556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.701717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.702305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.702458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.702475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.702628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.703713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.703869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.704571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.705052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.705057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.705175] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.729230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.729235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.729352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.729522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.731093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.731234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.732514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.756911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.761757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.761891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.762369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.762535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.762579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.762761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.763244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.763791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.764308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.765486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.766487] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.767269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.767430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.767583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.767743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.768332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.768487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.768504] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.768675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.769738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.769883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.770580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.771073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.771078] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.771195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.795813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.795818] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.795938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.796084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.797623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.797776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.799152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.823550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.828227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.828350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.828861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.829045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.829065] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.829190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.829682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.830185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.830768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.832070] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.833194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.833962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.834121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.834260] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.834395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.835001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.835179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.835196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.835323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.836418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.836547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.837242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.837735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.837741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.837880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.863568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.863573] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.863702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.863845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.865471] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.865520] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.866838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.891219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.895383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.895539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.896010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.896153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.896173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.896296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.896794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.897279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.897851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.899018] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.900118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.900879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.901039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.901178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.901312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.901927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.902098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.902115] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.902241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.903343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.903472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.904172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.904669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.904675] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.904823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.928345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.928350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.928493] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.928702] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.930312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.930334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.931517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.955914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.960490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.960598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.961069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.961213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.961233] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.961356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.961898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.962393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.962987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.964298] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.965400] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.966169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.966329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.966481] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.966640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.967228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.967372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.967389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.967528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.968668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.968815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.969517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.970001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.970008] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.970145] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.995304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.995309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.995428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.995586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.997177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.997314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.998470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.022834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.028261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.028388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.028954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.029147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.029168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.029293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.029783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.030288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.030865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.032027] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.033124] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.033869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.034039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.034174] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.034305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.034918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.035108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.035124] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.035247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.036355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.036486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.037173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.037676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.037683] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.037833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.061831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.061836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.062012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.062156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.063681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.063833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.065161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.089527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.093124] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.093246] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.093761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.093958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.093978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.094103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.094607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.095096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.095674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.096796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.097892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.098651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.098810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.098950] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.099086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.099694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.099867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.099884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.100014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.101111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.101231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.101920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.102392] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.102397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.102526] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.125538] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.125543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.125662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.125808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.127325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.127497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.128905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.153258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.156866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.156976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.157459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.157667] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.157687] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.157815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.158299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.158843] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.159360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.160486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.161486] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.162271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.162431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.162583] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.162738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.163339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.163499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.163523] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.163664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.164765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.164910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.165598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.166097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.166102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.166219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.191371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.191376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.191520] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.191728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.193234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.193374] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.195821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.220218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.224508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.224617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.225089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.225233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.225252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.225376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.225889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.226385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.226961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.228148] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.229231] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.230027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.230189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.230327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.230487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.231146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.231290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.231306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.231429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.233051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.233168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.233868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.234362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.234367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.234507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.260758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.260763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.260907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.261050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.262939] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.262963] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.264340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.288711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.293574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.293705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.294184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.294337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.294358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.294533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.295080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.295599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.296163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.297310] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.298410] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.299027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.299187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.299327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.299485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.300105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.300249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.300266] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.300391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.302023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.302139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.303341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.303881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.303887] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.304013] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.330246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.330251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.330368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.330580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.332130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.332269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.333496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.357876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.362784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.362917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.363397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.363563] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.363609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.363794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.364286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.364826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.365346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.366485] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.367485] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.368270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.368430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.368592] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.368748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.369332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.369502] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.369535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.369681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.370816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.370932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.372386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.372915] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.372920] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.373050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.396053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.396058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.396178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.396324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.397960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.397984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.399369] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.423748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.428528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.428659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.429135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.429287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.429307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.429470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.429987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.430509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.431074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.432209] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.433333] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.433971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.434131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.434269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.434403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.435024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.435189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.435206] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.435328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.436470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.436591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.437290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.437793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.437800] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.437940] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.461944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.461949] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.462066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.462209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.463853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.463876] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.465174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.489567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.493168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.493291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.493780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.493992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.494011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.494136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.494628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.495119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.495717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.496984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.498068] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.498860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.499020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.499158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.499294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.499894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.500066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.500083] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.500210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.501297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.501416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.502120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.502646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.502652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.502802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.526877] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.526883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.527010] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.527153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.528723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.528860] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.530160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.554521] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.558089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.558194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.558675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.558876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.558896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.559021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.559523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.560004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.560604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.561817] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.562912] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.563653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.563812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.563951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.564086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.564693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.564853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.564870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.565033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.566135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.566254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.566942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.567462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.567468] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.567619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.593875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.593893] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.594008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.594150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.595719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.595854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.597121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.621514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.625657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.625762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.626231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.626376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.626396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.626535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.627070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.627609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.628158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.629288] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.630381] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.631002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.631162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.631301] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.631436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.632052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.632219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.632237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.632378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.633484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.633604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.634295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.634817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.634823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.634975] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.658509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.658515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.658646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.658790] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.660305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.660478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.661884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.686269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.689815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.689925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.690395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.690550] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.690605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.690760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.691245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.691757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.692306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.693487] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.694488] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.695282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.695442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.695620] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.695780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.696369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.696523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.696540] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.696703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.697784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.697932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.698631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.699129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.699134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.699251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.722699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.722705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.722826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.722973] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.724612] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.724634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.726015] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.750404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.754027] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.754125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.754626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.754811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.754830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.754954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.755422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.755952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.756524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.757725] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.758812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.759580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.759749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.759885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.760016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.760628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.760806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.760824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.760965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.762047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.762170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.762855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.763364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.763369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.763496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.790846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.790851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.790981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.791125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.792688] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.792823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.794153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.818536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.822055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.822160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.822641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.822856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.822875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.823000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.823535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.824008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.824644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.825818] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.826916] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.827653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.827811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.827951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.828085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.828681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.828852] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.828869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.828998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.830081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.830203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.830896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.831376] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.831381] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.831509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.855600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.855605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.855724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.855870] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.856898] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.857080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.858432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.882823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.886874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.886993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.887488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.887687] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.887707] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.887832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.888316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.888829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.889376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.890487] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.891486] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.892273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.892433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.892586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.892755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.893344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.893504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.893528] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.893668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.894771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.894916] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.895615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.896104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.896109] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.896226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.920833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.920851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.920966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.921109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.922684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.922825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.924153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.948547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.952103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.952208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.952688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.952896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.952916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.953040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.953544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.954027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.954609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.955766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.956813] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.957580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.957748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.957886] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.958020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.958631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.958798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.958814] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.958957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.959991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.960122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.960791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.961308] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.961314] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.961430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.984378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.984383] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.984516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.984733] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.986239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.986376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.988818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.013216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.016809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.016918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.017388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.017543] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.017589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.017772] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.018243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.018769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.019318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.020433] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.021491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.022271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.022430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.022584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.022745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.023334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.023490] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.023508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.023669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.024749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.024893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.025593] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.026085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.026090] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.026209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.050828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.050834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.050980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.051123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.052151] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.052308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.053472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.077816] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.083274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.083401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.083939] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.084129] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.084149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.084274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.084771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.085258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.085827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.087034] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.087817] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.088584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.088753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.088889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.089021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.089613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.089815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.089832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.089958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.091015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.091142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.091851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.092345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.092351] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.092527] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.118246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.118251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.118367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.118568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.120108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.120246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.121511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.145856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.151260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.151387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.151891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.152078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.152098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.152222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.152718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.153208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.153777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.154959] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.156063] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.156852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.157011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.157149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.157284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.157894] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.158065] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.158082] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.158209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.159304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.159424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.160124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.160643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.160648] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.160812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.186485] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.186490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.186622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.186766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.188269] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.188412] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.189850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.214193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.219424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.219616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.220104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.220252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.220272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.220402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.220947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.221440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.222021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.223200] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.224003] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.224772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.224932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.225072] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.225207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.225856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.226046] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.226063] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.226186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.227225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.227389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.228103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.228616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.228621] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.228810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.256108] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.256113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.256229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.256371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.257405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.257565] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.258975] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.283308] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.288282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.288406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.288959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.289150] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.289170] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.289298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.289804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.290303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.290872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.292017] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.293115] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.293900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.294060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.294199] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.294335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.294950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.295115] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.295133] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.295258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.296378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.296514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.297202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.297736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.297755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.297939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.323085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.323090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.323206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.323348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.324951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.324974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.326345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.350711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.356065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.356191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.356700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.356889] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.356908] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.357033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.357529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.358017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.358612] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.359746] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.360811] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.361579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.361738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.361876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.362011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.362608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.362779] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.362796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.362922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.364027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.364157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.364852] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.365351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.365358] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.365545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.391287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.391292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.391408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.391623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.393173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.393304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.394471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.418873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.422440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.422556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.423027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.423172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.423191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.423315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.423796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.424298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.424912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.426068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.426875] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.427656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.427815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.427955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.428088] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.428705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.428863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.428880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.429031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.430110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.430232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.430914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.431396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.431401] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.431533] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.455596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.455602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.455724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.455871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.457363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.457514] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.458913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.483288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.487397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.487579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.488072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.488217] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.488236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.488389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.488901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.489410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.490002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.491150] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.492201] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.492970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.493130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.493268] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.493404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.494020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.494196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.494212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.494338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.495432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.495560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.496261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.496762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.496769] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.496921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.521010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.521015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.521132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.521276] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.523314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.523456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.524915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.549306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.552903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.553029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.553519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.553730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.553749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.553876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.554359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.554874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.555421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.556486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.557487] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.558299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.558472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.558673] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.558806] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.559390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.559541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.559581] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.559756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.561341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.561496] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.562197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.562700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.562707] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.562858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.586385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.586390] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.586548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.586766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.588293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.588429] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.589853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.614247] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.617802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.617910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.618381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.618537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.618582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.618749] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.619219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.619759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.620305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.621463] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.622491] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.623274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.623434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.623617] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.623786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.624385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.624539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.624578] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.624748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.625828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.625973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.626677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.627169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.627174] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.627291] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.654574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.654579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.654727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.654870] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.656386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.656617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.657991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.682380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.686529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.686629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.687101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.687246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.687265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.687389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.687905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.688385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.688975] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.690300] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.691398] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.692168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.692329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.692484] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.692643] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.693233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.693378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.693395] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.693534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.694682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.694825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.695502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.696018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.696023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.696139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.720683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.720688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.720832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.720976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.722610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.722633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.723978] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.748326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.752494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.752616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.753099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.753243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.753262] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.753403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.753940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.754429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.755019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.756176] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.757272] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.758027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.758187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.758326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.758474] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.759096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.759241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.759258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.759386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.760489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.760608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.761307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.761800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.761807] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.761944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.785460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.785465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.785584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.785731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.786758] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.786939] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.788317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.812720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.818071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.818212] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.818734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.818923] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.818943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.819068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.819587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.820076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.820637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.821816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.822913] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.823652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.823811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.823952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.824086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.824697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.824863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.824880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.825004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.826052] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.826185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.827414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.827965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.827970] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.828088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.853811] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.853816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.853933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.854081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.855744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.855776] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.857121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.881498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.885634] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.885747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.886215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.886356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.886374] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.886556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.887080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.887619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.888169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.889304] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.890402] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.891170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.891329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.891481] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.891633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.892243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.892390] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.892407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.892546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.893678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.893821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.894510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.895018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.895023] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.895140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.919173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.919178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.919295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.919438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.921020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.921166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.922512] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.946906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.951462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.951588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.952068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.952220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.952240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.952390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.952942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.953431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.954022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.955177] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.956276] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.957027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.957187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.957326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.957476] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.958109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.958255] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.958272] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.958401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.959494] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.959614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.960304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.960803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.960810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.960959] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.984424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.984429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.984562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.984774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.985952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.985980] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.987358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.011722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.015350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.015484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.015962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.016115] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.016135] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.016267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.016779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.017263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.017887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.019026] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.020123] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.020878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.021037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.021180] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.021314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.021904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.022074] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.022090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.022217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.023280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.023400] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.024106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.024624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.024629] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.024781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.047771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.047776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.047891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.048033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.049075] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.049240] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.050458] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.074855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.080220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.080351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.080867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.081052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.081074] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.081199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.081693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.082181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.082751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.083942] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.085038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.085815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.085977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.086117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.086251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.086847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.087018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.087035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.087161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.088263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.088384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.089084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.089608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.089613] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.089778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.117105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.117110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.117226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.117370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.118533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.118581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.119905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.144302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.147866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.147978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.148465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.148670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.148690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.148815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.149284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.149825] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.150359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.151669] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.152764] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.153492] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.153666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.153806] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.153940] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.154549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.154730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.154748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.154874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.155985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.156129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.156829] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.157321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.157327] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.157444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.185316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.185322] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.185460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.185681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.187188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.187316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.188457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.212762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.218203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.218329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.218857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.219034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.219053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.219179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.219673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.220162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.220731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.221816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.222911] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.223706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.223865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.224004] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.224138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.224751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.224971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.224988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.225111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.226149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.226273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.226981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.227522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.227527] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.227691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.252277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.252283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.252401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.252596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.253663] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.253815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.255165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.279497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.284380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.284507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.284986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.285139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.285160] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.285292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.285781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.286302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.286888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.288042] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.289154] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.289898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.290068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.290204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.290336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.290961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.291125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.291142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.291265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.291982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.292108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.293313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.293849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.293855] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.293969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.320263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.320268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.320383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.320596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.321684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.321822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.323162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.347503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.352467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.352587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.353066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.353219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.353239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.353373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.353933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.354415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.355006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.356166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.357264] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.358025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.358184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.358324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.358470] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.359094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.359240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.359256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.359382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.360474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.360594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.361271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.361809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.361815] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.361958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.387130] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.387135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.387251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.387394] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.388433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.388617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.390020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.414361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.419267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.419382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.419907] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.420077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.420096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.420224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.420719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.421220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.421779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.422958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.424065] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.424857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.425046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.425184] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.425319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.425923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.426093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.426110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.426237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.427319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.427439] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.428136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.428673] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.428679] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.428830] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.454000] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.454005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.454122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.454265] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.455307] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.455441] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.456874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.481215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.486667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.486821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.487296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.487444] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.487492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.487691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.488165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.488716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.489240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.490377] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.491485] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.492248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.492409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.492562] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.492723] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.493311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.493463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.493480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.493633] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.494697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.494841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.495536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.496029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.496034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.496154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.522434] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.522439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.522593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.522799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.524291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.524431] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.525857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.550198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.554491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.554600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.555071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.555215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.555235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.555359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.555870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.556380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.556951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.558102] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.559203] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.559997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.560157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.560297] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.560431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.561044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.561214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.561231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.561357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.562466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.562585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.563270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.563805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.563811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.563955] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.591267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.591272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.591388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.591602] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.592690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.592826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.594183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.618523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.624020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.624155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.624672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.624860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.624880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.625008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.625501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.625991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.626563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.627743] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.628813] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.629593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.629750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.629885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.630015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.630609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.630812] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.630829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.630955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.632044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.632186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.632905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.633396] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.633404] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.633567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.660357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.660362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.660537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.660724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.662251] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.662388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.663821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.688159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.693410] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.693574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.694063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.694212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.694231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.694361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.694879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.695387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.695969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.697145] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.698230] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.699026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.699186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.699324] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.699484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.700138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.700280] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.700297] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.700420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.701546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.701663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.702347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.702888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.702907] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.703052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.727593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.727598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.727743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.727887] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.728917] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.729090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.730491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.754834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.759691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.759815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.760293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.760446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.760501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.760675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.761144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.761666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.762230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.763359] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.764466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.765260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.765421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.765573] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.765736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.766334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.766488] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.766505] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.766658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.767741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.767885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.768582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.769080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.769087] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.769213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.795462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.795482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.795610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.795754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.797271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.797410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.798833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.823173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.828103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.828352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.829094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.829538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.829582] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.829902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.830539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.831123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.831710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.833090] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.833845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.834392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.834694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.834902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.835044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.835647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.835827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.835845] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.835978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.837081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.837209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.837909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.838401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.838406] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.838540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.863666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.863671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.863815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.863958] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.865002] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.865153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.866495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.890894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.896351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.896569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.897167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.897438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.897489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.897796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.898374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.898928] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.899555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.900856] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.901845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.902388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.902687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.902973] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.903209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.903914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.904227] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.904256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.904509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.905773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.906025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.906825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.907383] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.907392] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.907661] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.934054] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.934059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.934174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.934318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.935909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.935932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.937305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.961678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.967037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.967161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.967669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.967870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.967890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.968017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.968514] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.969001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.969595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.970755] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.971810] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.972579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.972737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.972876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.973010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.973617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.973788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.973805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.973931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.974955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.975090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.975791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.976281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.976288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.976410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.000453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.000457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.000601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.000744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.002261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.002400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.003800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.028131] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.033614] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.033900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.034647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.035098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.035144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.035496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.036252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.036922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.037677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.039010] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.039898] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.040555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.040989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.041274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.041527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.042261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.042534] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.042564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.042845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.043658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.043887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.044688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.045277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.045286] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.045438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.071152] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.071157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.071273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.071416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.072958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.073083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.074455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.098820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.103439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.103557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.104025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.104169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.104188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.104315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.104794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.105299] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.105894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.107235] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.108355] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.109113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.109281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.109416] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.109606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.110230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.110372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.110388] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.110540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.111663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.111820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.112541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.113032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.113037] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.113150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.141017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.141022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.141142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.141285] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.142845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.142984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.144363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.168672] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.174603] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.174726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.175194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.175335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.175353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.175500] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.176040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.176590] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.177118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.178385] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.179326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.180091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.180250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.180390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.180538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.181151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.181298] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.181314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.181441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.182544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.182666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.183351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.183873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.183880] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.184018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.209737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.209742] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.209858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.210002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.211029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.211149] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.212453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.236814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.241618] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.241750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.242227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.242378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.242400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.242554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.243126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.243645] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.244208] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.245486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.246489] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.247271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.247431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.247582] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.247740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.248336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.248505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.248525] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.248687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.249781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.249930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.250656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.251124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.251130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.251243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.278563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.278569] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.278700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.278844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.280356] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.280498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.281907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.306254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.311615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.311733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.312204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.312347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.312366] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.312503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.313041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.313588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.314115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.315362] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.316475] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.317243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.317406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.317558] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.317721] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.318309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.318466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.318483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.318646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.319740] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.319885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.320582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.321074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.321079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.321198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.347381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.347386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.347544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.347774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.348818] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.348952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.350334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.374687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.380048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.380173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.380689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.380914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.380933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.381073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.381588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.382071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.382641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.383816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.384910] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.385692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.385851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.385990] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.386124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.386726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.386907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.386925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.387054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.388125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.388245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.388932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.389462] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.389467] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.389586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.414712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.414716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.414844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.414987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.416119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.416142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.418746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.443093] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.448399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.448547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.449019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.449189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.449208] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.449345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.449867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.450351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.450938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.452045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.453157] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.453908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.454067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.454206] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.454341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.454983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.455164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.455180] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.455304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.456011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.456134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.456866] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.457346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.457353] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.457544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.482809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.482814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.482946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.483104] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.484615] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.484825] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.486191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.510535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.516039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.516161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.516686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.516888] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.516920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.517046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.517542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.518029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.518624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.519786] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.520812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.521578] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.521737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.521875] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.522009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.522614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.522759] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.522775] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.522901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.523964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.524086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.524775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.525278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.525283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.525399] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.548938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.548944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.549059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.549203] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.550878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.550901] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.552309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.576680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.582032] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.582157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.582651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.582826] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.582845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.582997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.583498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.583985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.584581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.585742] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.586811] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.587576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.587735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.587875] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.588010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.588622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.588796] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.588813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.588939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.590042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.590166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.590862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.591370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.591377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.591514] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.617219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.617224] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.617341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.617540] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.619143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.619278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.620456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.644848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.649700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.649825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.650303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.650466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.650510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.650696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.651193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.651716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.652280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.653393] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.654483] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.655275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.655434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.655587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.655758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.656345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.656499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.656516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.656669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.657751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.657896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.658570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.659093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.659100] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.659238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.683852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.683869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.683984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.684127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.685169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.685304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.686456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.710798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.716066] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.716192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.716713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.716902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.716950] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.717074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.717571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.718058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.718653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.719788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.720812] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.721581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.721741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.721881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.722016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.722612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.722783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.722800] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.722930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.724032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.724153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.724864] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.725346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.725354] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.725500] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.750117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.750123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.750238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.750382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.752044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.752092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.753367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.777713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.783082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.783221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.783772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.783962] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.783982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.784107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.784600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.785101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.785662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.786817] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.787915] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.788653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.788811] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.788951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.789086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.789697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.789865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.789882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.790006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.790735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.790860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.792053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.792623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.792630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.792784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.819049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.819054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.819169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.819313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.820887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.821058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.822406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.846805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.850342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.850475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.850953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.851106] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.851126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.851258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.851744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.852249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.852904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.854046] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.855158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.855873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.856031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.856169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.856303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.856906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.857077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.857094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.857221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.858305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.858424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.859120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.859651] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.859656] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.859799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.884952] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.884958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.885077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.885224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.886268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.886402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.887828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.912162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.916871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.916997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.917487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.917713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.917747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.917887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.918354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.918883] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.919442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.920486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.921296] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.922076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.922235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.922375] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.922522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.923143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.923289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.923306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.923432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.924538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.924671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.925435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.925955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.925963] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.926133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.952993] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.952999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.953116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.953260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.954773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.954924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.956359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.980786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.986207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.986334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.986858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.987060] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.987086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.987264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.987835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.988324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.988901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.990037] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.991137] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.991871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.992096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.992290] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.992433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.993031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.993177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.993194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.993320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.994375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.994505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.995192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.995721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.995728] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.995899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.023845] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.023851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.023980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.024123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.025656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.025807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.027136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.051500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.055640] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.055744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.056215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.056358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.056377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.056518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.057036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.057549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.058104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.059337] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.060438] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.061208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.061366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.061567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.061761] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.062407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.062633] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.062658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.062823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.063915] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.064034] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.064733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.065227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.065232] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.065348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.093776] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.093781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.093912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.094056] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.095588] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.095739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.097124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.121510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.125628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.125733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.126205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.126349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.126369] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.126509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.127030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.127542] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.128097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.129333] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.130434] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.131206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.131365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.131520] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.131657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.132253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.132479] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.132503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.132695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.133863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.133993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.134690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.135194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.135199] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.135315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.163774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.163779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.163897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.164040] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.165551] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.165701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.167183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.191523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.195679] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.195783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.196255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.196400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.196418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.196560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.197083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.197596] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.198151] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.199399] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.200485] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.201246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.201406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.201559] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.201695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.202285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.202508] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.202532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.202717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.203863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.204000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.204681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.205165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.205170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.205286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.233669] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.233674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.233822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.233965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.235499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.235650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.237152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.261541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.266118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.266223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.266710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.266892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.266912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.267108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.267668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.268172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.268777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.269946] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.271037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.271817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.272047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.272245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.272435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.273094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.273247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.273264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.273391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.274501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.274621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.275303] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.275839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.275844] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.275961] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.303880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.303898] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.304015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.304160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.305693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.305843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.307109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.331484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.336117] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.336220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.336703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.336929] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.336955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.337137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.337716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.338207] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.338814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.340097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.341182] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.341969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.342196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.342367] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.342516] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.343130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.343277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.343294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.343421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.344517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.344637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.345327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.345855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.345862] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.346032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.373400] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.373406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.373544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.373789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.375380] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.375556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.376998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.401379] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.405031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.405130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.405650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.405831] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.405850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.405976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.406444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.406974] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.407565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.408816] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.409909] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.410482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.410642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.410781] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.410917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.411531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.411739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.411762] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.411945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.413100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.413274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.413937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.414510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.414516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.414635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.443631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.443636] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.443754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.443897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.445415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.445589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.447080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.471443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.475608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.475709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.476179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.476322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.476341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.476482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.477026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.477539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.478113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.479353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.480434] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.481205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.481364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.481519] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.481664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.482311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.482536] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.482560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.482743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.483909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.484033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.484727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.485229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.485234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.485350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.513282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.513288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.513406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.513610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.515211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.515362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.516860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.541252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.546098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.546245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.546770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.547017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.547043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.547222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.547777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.548308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.548896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.550069] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.551172] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.551933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.552152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.552350] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.552560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.553216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.553370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.553387] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.553531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.554613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.554732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.555413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.555925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.555930] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.556047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.583378] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.583384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.583541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.583779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.585389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.585574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.586981] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.611364] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.615518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.615644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.616111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.616252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.616270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.616391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.616941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.617428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.618005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.619198] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.620316] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.621077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.621238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.621378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.621528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.622126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.622312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.622336] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.622531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.623698] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.623854] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.624191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.624670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.624676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.624792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.652134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.652140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.652259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.652403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.653911] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.654061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.655487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.679779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.684537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.684647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.685124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.685324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.685348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.685543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.686132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.686657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.687214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.688362] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.689465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.690270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.690527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.690732] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.690903] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.691545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.691702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.691719] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.691842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.693431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.693597] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.694283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.694824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.694830] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.695004] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.722374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.722380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.722534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.722778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.724365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.724549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.725956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.750352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.753993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.754091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.754584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.754786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.754805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.754929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.755396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.755925] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.756515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.757773] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.758809] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.759571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.759741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.759876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.760008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.760628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.760858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.760882] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.761065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.762221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.762393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.763130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.763641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.763647] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.763763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [191.772909] [IGT] i915_pm_rpm: exiting, ret=77 <7> [191.789961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.789968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.790118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.790398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.790421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.790591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.791087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.791227] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.791242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.791365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.791899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.792391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.792965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.794212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.795173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.795961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.796119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.796257] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.796393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.797013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.797191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.797208] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.797375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.799041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.799174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.799920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.800401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.800405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.800599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

Created at 2023-08-07 00:00:44