igt@i915_selftest@live@mman on fi-cfl-guc@linus-v6.5-rc5 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gb7a2382f1 (x86_64) (Linux: 6.5.0-rc5-linus-v6.5-rc5-g52a93d39b17d+ x86_64)
Out	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (3.859s)
Err	Starting dynamic subtest: mman Dynamic subtest mman: SUCCESS (3.859s)
Dmesg	<6> [257.916493] [IGT] i915_selftest: starting dynamic subtest mman <5> [258.004505] Setting dangerous option enable_guc - tainting kernel <5> [258.004511] Setting dangerous option live_selftests - tainting kernel <7> [258.033540] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [258.033711] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [258.033853] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [258.033862] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP) <7> [258.033990] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [258.034165] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [258.034280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [258.034894] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [258.035007] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [258.035136] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [258.035260] i915 0000:00:02.0: vgaarb: deactivate vga console <7> [258.035462] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047 <7> [258.035623] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [258.035875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018 <7> [258.036023] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [258.036153] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [258.036280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [258.036425] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [258.040352] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [258.040543] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [258.040699] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [258.040835] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [258.040971] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [258.041078] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [258.041180] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [258.041281] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [258.041430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [258.041559] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [258.041653] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [258.041746] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [258.041838] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [258.041942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [258.042461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [258.042648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209 <7> [258.042821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [258.043004] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [258.043183] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [258.043379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [258.043564] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [258.043712] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [258.043860] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [258.044009] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366) <7> [258.044157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [258.044333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [258.044559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [258.044723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [258.044869] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [258.045016] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [258.045163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [258.045343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [258.045578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [258.045725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [258.045868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support <7> [258.046023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [258.046202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [258.046405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [258.046569] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9 <7> [258.046712] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [258.046873] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10 <7> [258.047072] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [258.047216] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10 <7> [258.047405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [258.047584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [258.047728] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [258.047882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.048062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [258.048220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [258.048441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [258.048644] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [258.048790] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [258.048936] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [258.049123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [258.049267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [258.049456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [258.049644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [258.049828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [258.050008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [258.050152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [258.050297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [258.050528] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <6> [258.051552] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [258.051787] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [258.052147] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [258.052361] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [258.052600] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [258.052737] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [258.052874] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [258.053009] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [258.053146] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [258.053282] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [258.053464] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [258.053636] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [258.054707] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [258.055596] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [258.055782] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it <7> [258.055949] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [258.056097] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [258.056233] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [258.056565] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default) <7> [258.056707] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C] <7> [258.056840] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [258.057031] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT) <7> [258.057173] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D] <7> [258.057531] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [258.057724] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D] <7> [258.057859] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [258.058049] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT) <7> [258.058211] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E] <7> [258.058505] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [258.058814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [258.058976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [258.059135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [258.059279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [258.059470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [258.059614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [258.059758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [258.059901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [258.060046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [258.060190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [258.060386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [258.060546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [258.060690] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [258.060834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A <7> [258.060977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A <7> [258.061183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A <7> [258.061351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B <7> [258.061508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C <7> [258.061653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A <7> [258.061798] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [258.061965] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [258.062130] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [258.062342] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [258.062568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [258.062720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled <7> [258.062869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled <7> [258.063018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled <7> [258.063165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled <7> [258.063310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [258.063563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [258.063701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [258.063839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [258.063987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [258.064128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [258.064268] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [258.064452] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [258.064600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [258.064741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [258.064933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [258.065088] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [258.065269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [258.065478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [258.065642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [258.065804] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [258.065965] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [258.066124] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [258.066278] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [258.068546] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K) <7> [258.068738] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [258.068874] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [258.068998] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [258.069136] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7> [258.070075] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [258.070214] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [258.070419] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [258.074425] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [258.074596] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [258.074758] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [258.096892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f <7> [258.097063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [258.097207] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [258.097359] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [258.097501] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a <7> [258.097643] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000 <7> [258.097784] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [258.097926] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [258.098067] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [258.098209] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [258.098356] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [258.098499] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [258.098640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [258.098782] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [258.098924] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [258.099960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1 <6> [258.099964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0 <7> [258.106353] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [258.106991] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [258.107149] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [258.107151] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [258.113879] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [258.114101] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [258.114235] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [258.114381] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [258.114569] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [258.114784] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [258.115286] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [258.115409] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [258.115514] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [258.115617] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [258.118697] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [258.119015] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event <7> [258.119264] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [258.119845] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event <7> [258.120114] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event <7> [258.120433] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [258.120917] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event <6> [258.120953] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [258.122562] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [258.135550] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [258.137542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input73 <7> [258.138043] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [258.138534] [drm:drm_client_modeset_probe] <7> [258.138587] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [258.138532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [258.138612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [258.138695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [258.138808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [258.138833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [258.138852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [258.138838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [258.138870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [258.138981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [258.139056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected <7> [258.139079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [258.139095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [258.139112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [258.139331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected <7> [258.139356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [258.139373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [258.139407] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [258.139391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [258.139562] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9 <7> [258.139564] i915 device info: graphics version: 9 <7> [258.139566] i915 device info: media version: 9 <7> [258.139567] i915 device info: display version: 9 <7> [258.139568] i915 device info: graphics stepping: <7> [258.139569] i915 device info: media stepping: <7> [258.139570] i915 device info: display stepping: <7> [258.139571] i915 device info: base die stepping: <7> [258.139572] i915 device info: gt: 2 <7> [258.139573] i915 device info: memory-regions: 0x21 <7> [258.139575] i915 device info: page-sizes: 0x11000 <7> [258.139576] i915 device info: platform: COFFEELAKE <7> [258.139577] i915 device info: ppgtt-size: 48 <7> [258.139578] i915 device info: ppgtt-type: 2 <7> [258.139579] i915 device info: dma_mask_size: 39 <7> [258.139580] i915 device info: is_mobile: no <7> [258.139581] i915 device info: is_lp: no <7> [258.139582] i915 device info: require_force_probe: no <7> [258.139583] i915 device info: is_dgfx: no <7> [258.139584] i915 device info: has_64bit_reloc: yes <7> [258.139585] i915 device info: has_64k_pages: no <7> [258.139587] i915 device info: gpu_reset_clobbers_display: no <7> [258.139588] i915 device info: has_reset_engine: yes <7> [258.139589] i915 device info: has_3d_pipeline: yes <7> [258.139590] i915 device info: has_4tile: no <7> [258.139591] i915 device info: has_flat_ccs: no <7> [258.139592] i915 device info: has_global_mocs: no <7> [258.139598] i915 device info: has_gmd_id: no <7> [258.139600] i915 device info: has_gt_uc: yes <7> [258.139601] i915 device info: has_heci_pxp: no <7> [258.139594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected <7> [258.139602] i915 device info: has_heci_gscfi: no <7> [258.139603] i915 device info: has_guc_deprivilege: no <7> [258.139604] i915 device info: has_l3_ccs_read: no <7> [258.139605] i915 device info: has_l3_dpf: no <7> [258.139606] i915 device info: has_llc: yes <7> [258.139608] i915 device info: has_logical_ring_contexts: yes <7> [258.139609] i915 device info: has_logical_ring_elsq: no <7> [258.139611] i915 device info: has_media_ratio_mode: no <7> [258.139613] i915 device info: has_mslice_steering: no <7> [258.139614] i915 device info: has_oa_bpc_reporting: no <7> [258.139615] i915 device info: has_oa_slice_contrib_limits: no <7> [258.139616] i915 device info: has_oam: no <7> [258.139618] i915 device info: has_one_eu_per_fuse_bit: no <7> [258.139619] i915 device info: has_pxp: no <7> [258.139620] i915 device info: has_rc6: yes <7> [258.139621] i915 device info: has_rc6p: no <7> [258.139622] i915 device info: has_rps: yes <7> [258.139616] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [258.139624] i915 device info: has_runtime_pm: yes <7> [258.139625] i915 device info: has_snoop: no <7> [258.139626] i915 device info: has_coherent_ggtt: yes <7> [258.139627] i915 device info: tuning_thread_rr_after_dep: no <7> [258.139628] i915 device info: unfenced_needs_alignment: no <7> [258.139629] i915 device info: hws_needs_physical: no <7> [258.139632] i915 device info: has_pooled_eu: no <7> [258.139633] i915 device info: cursor_needs_physical: no <7> [258.139634] i915 device info: has_cdclk_crawl: no <7> [258.139636] i915 device info: has_cdclk_squash: no <7> [258.139637] i915 device info: has_ddi: yes <7> [258.139638] i915 device info: has_dp_mst: yes <7> [258.139632] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [258.139639] i915 device info: has_dsb: no <7> [258.139641] i915 device info: has_fpga_dbg: yes <7> [258.139642] i915 device info: has_gmch: no <7> [258.139643] i915 device info: has_hotplug: yes <7> [258.139644] i915 device info: has_hti: no <7> [258.139645] i915 device info: has_ipc: yes <7> [258.139647] i915 device info: has_overlay: no <7> [258.139649] i915 device info: has_psr: yes <7> [258.139650] i915 device info: has_psr_hw_tracking: yes <7> [258.139651] i915 device info: overlay_needs_physical: no <7> [258.139652] i915 device info: supports_tv: no <7> [258.139654] i915 device info: has_hdcp: yes <7> [258.139655] i915 device info: has_dmc: yes <7> [258.139656] i915 device info: has_dsc: no <7> [258.139657] i915 device info: rawclk rate: 24000 kHz <7> [258.139659] i915 device info: iommu: disabled <7> [258.139660] i915 device info: available engines: 40403 <7> [258.139662] i915 device info: slice total: 1, mask=0001 <7> [258.139663] i915 device info: subslice total: 3 <7> [258.139664] i915 device info: slice0: 3 subslices, mask=00000007 <7> [258.139666] i915 device info: slice1: 0 subslices, mask=00000000 <7> [258.139668] i915 device info: slice2: 0 subslices, mask=00000000 <7> [258.139669] i915 device info: EU total: 24 <7> [258.139670] i915 device info: EU per subslice: 8 <7> [258.139672] i915 device info: has slice power gating: no <7> [258.139674] i915 device info: has subslice power gating: no <7> [258.139675] i915 device info: has EU power gating: yes <6> [258.139678] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [258.139680] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [258.139683] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [258.139686] i915: Performing live selftests with st_random_seed=0x8488d17 st_timeout=500 <6> [258.139689] i915: Running mman <6> [258.139704] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling <7> [258.139648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [258.139839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected <7> [258.139862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [258.139879] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [258.139884] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [258.139888] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [258.139892] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [258.139896] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [258.139900] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [258.139937] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [258.139947] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [258.139969] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [258.139990] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [258.140618] [drm:drm_client_modeset_probe] <7> [258.140682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [258.140702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [258.140916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [258.140935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] <7> [258.140953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2] <7> [258.141153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected <7> [258.141171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] <7> [258.141188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1] <7> [258.141428] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected <7> [258.141447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] <7> [258.141488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3] <7> [258.141689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected <7> [258.141707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] <7> [258.141724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2] <7> [258.141910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected <7> [258.141928] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [258.141932] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [258.141936] [drm:drm_client_modeset_probe] connector 105 enabled? no <7> [258.141940] [drm:drm_client_modeset_probe] connector 109 enabled? no <7> [258.141943] [drm:drm_client_modeset_probe] connector 116 enabled? no <7> [258.141947] [drm:drm_client_modeset_probe] connector 120 enabled? no <7> [258.141977] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [258.141988] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [258.142010] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [258.142030] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [258.265478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [258.265793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [258.265948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [258.266098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [258.266688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [258.671502] check_partial_mappings: timed out after tiling=0 stride=0 <7> [259.172338] check_partial_mappings: timed out after tiling=1 stride=262144 <7> [259.673349] check_partial_mappings: timed out after tiling=2 stride=262144 <6> [259.699456] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling <6> [260.200618] igt_smoke_tiling: Completed 5509 trials <6> [260.335169] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion <7> [260.335382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [260.335613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [260.336116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <6> [260.362467] i915: Running i915_gem_mman_live_selftests/igt_mmap <7> [260.362550] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [260.364416] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [260.365716] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [260.366654] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [260.369702] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [260.457345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [260.457507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [260.457654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [260.458230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [260.893032] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [261.376450] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate <6> [261.376461] i915: Running i915_gem_mman_live_selftests/igt_mmap_access <7> [261.376494] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.377031] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.377434] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.377768] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [261.389445] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke <7> [261.389482] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.390179] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [261.404435] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu <7> [261.404494] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.405388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [261.405565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [261.406066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [261.407635] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [261.418466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [261.418677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [261.418829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [261.418978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [261.419127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [261.438412] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [261.486766] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [261.528668] i915: probe of 0000:00:02.0 failed with error -25 <6> [261.776174] [IGT] i915_selftest: finished subtest mman, SUCCESS

<6> [257.916493] [IGT] i915_selftest: starting dynamic subtest mman

<5> [258.004505] Setting dangerous option enable_guc - tainting kernel

<5> [258.004511] Setting dangerous option live_selftests - tainting kernel

<7> [258.033540] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [258.033711] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [258.033853] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [258.033862] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Kaby Lake PCH (KBP)

<7> [258.033990] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [258.034165] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [258.034280] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [258.034894] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [258.035007] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [258.035136] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [258.035260] i915 0000:00:02.0: vgaarb: deactivate vga console

<7> [258.035462] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8ff00047

<7> [258.035623] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [258.035875] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x8c90a018

<7> [258.036023] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [258.036153] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [258.036280] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [258.036425] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [258.040352] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [258.040543] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [258.040699] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [258.040835] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [258.040971] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [258.041078] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [258.041180] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [258.041281] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [258.041430] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [258.041559] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [258.041653] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [258.041746] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [258.041838] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [258.041942] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [258.042461] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [258.042648] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 209

<7> [258.042821] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [258.043004] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [258.043183] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [258.043379] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [258.043564] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [258.043712] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [258.043860] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [258.044009] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1298, min size 1366)

<7> [258.044157] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [258.044333] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [258.044559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [258.044723] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [258.044869] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [258.045016] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [258.045163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [258.045343] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [258.045578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [258.045725] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [258.045868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same AUX CH (0x40) as port A, disabling port A DP support

<7> [258.046023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [258.046202] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [258.046405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [258.046569] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 9

<7> [258.046712] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [258.046873] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 10

<7> [258.047072] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [258.047216] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 10

<7> [258.047405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [258.047584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [258.047728] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [258.047882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.048062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [258.048220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [258.048441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [258.048644] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [258.048790] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [258.048936] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [258.049123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [258.049267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [258.049456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [258.049644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [258.049828] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [258.050008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [258.050152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [258.050297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [258.050528] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<6> [258.051552] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [258.051787] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [258.052147] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [258.052361] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [258.052600] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [258.052737] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [258.052874] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [258.053009] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [258.053146] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [258.053282] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [258.053464] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [258.053636] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [258.054707] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [258.055596] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [258.055782] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not DVI/HDMI/DP compatible, respect it

<7> [258.055949] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [258.056097] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [258.056233] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [258.056565] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:104:DDI C/PHY C] using AUX C (platform default)

<7> [258.056707] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:104:DDI C/PHY C]

<7> [258.056840] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:104:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [258.057031] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:108:DDI D/PHY D] using AUX D (VBT)

<7> [258.057173] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:108:DDI D/PHY D]

<7> [258.057531] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [258.057724] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:108:DDI D/PHY D]

<7> [258.057859] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:108:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [258.058049] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:119:DDI E/PHY E] using AUX A (VBT)

<7> [258.058211] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:119:DDI E/PHY E]

<7> [258.058505] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [258.058814] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [258.058976] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [258.059135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [258.059279] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [258.059470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [258.059614] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [258.059758] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [258.059901] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [258.060046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [258.060190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [258.060386] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [258.060546] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [258.060690] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [258.060834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:104:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [258.060977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [258.061183] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST A] hw state readout: disabled, pipe A

<7> [258.061351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST B] hw state readout: disabled, pipe B

<7> [258.061508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:112:DP-MST C] hw state readout: disabled, pipe C

<7> [258.061653] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:119:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [258.061798] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [258.061965] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [258.062130] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [258.062342] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [258.062568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [258.062720] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled

<7> [258.062869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:109:DP-1] hw state readout: disabled

<7> [258.063018] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:116:HDMI-A-3] hw state readout: disabled

<7> [258.063165] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:120:DP-2] hw state readout: disabled

<7> [258.063310] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [258.063563] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [258.063701] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [258.063839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [258.063987] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [258.064128] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [258.064268] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [258.064452] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [258.064600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [258.064741] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [258.064933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [258.065088] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [258.065269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [258.065478] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [258.065642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [258.065804] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [258.065965] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [258.066124] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [258.066278] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [258.068546] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [240K, 784K)

<7> [258.068738] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [258.068874] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [258.068998] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [258.069136] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global

<7> [258.070075] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [258.070214] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [258.070419] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [258.074425] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [258.074596] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [258.074758] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [258.096892] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xc404f

<7> [258.097063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [258.097207] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [258.097359] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [258.097501] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x98a

<7> [258.097643] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x3e920000

<7> [258.097784] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [258.097926] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [258.098067] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [258.098209] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [258.098356] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [258.098499] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [258.098640] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [258.098782] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [258.098924] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [258.099960] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/kbl_guc_70.1.1.bin version 70.1.1

<6> [258.099964] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/kbl_huc_4.0.0.bin version 4.0.0

<7> [258.106353] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 4ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [258.106991] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [258.107149] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [258.107151] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [258.113879] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [258.114101] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [258.114235] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [258.114381] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [258.114569] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [258.114784] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [258.115286] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [258.115409] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [258.115514] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [258.115617] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [258.118697] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [258.119015] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:105:HDMI-A-2] generating connector hotplug event

<7> [258.119264] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [258.119845] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:109:DP-1] generating connector hotplug event

<7> [258.120114] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:116:HDMI-A-3] generating connector hotplug event

<7> [258.120433] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [258.120917] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:120:DP-2] generating connector hotplug event

<6> [258.120953] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [258.122562] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [258.135550] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [258.137542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input73

<7> [258.138043] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [258.138534] [drm:drm_client_modeset_probe]

<7> [258.138587] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [258.138532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [258.138612] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [258.138695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [258.138808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [258.138833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [258.138852] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [258.138838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [258.138870] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [258.138981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [258.139056] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected

<7> [258.139079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [258.139095] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [258.139112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [258.139331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] status updated from unknown to disconnected

<7> [258.139356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [258.139373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [258.139407] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [258.139391] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [258.139562] i915 device info: pciid=0x3e92 rev=0x00 platform=COFFEELAKE (subplatform=0x0) gen=9

<7> [258.139564] i915 device info: graphics version: 9

<7> [258.139566] i915 device info: media version: 9

<7> [258.139567] i915 device info: display version: 9

<7> [258.139568] i915 device info: graphics stepping: **

<7> [258.139569] i915 device info: media stepping: **

<7> [258.139570] i915 device info: display stepping: **

<7> [258.139571] i915 device info: base die stepping: **

<7> [258.139572] i915 device info: gt: 2

<7> [258.139573] i915 device info: memory-regions: 0x21

<7> [258.139575] i915 device info: page-sizes: 0x11000

<7> [258.139576] i915 device info: platform: COFFEELAKE

<7> [258.139577] i915 device info: ppgtt-size: 48

<7> [258.139578] i915 device info: ppgtt-type: 2

<7> [258.139579] i915 device info: dma_mask_size: 39

<7> [258.139580] i915 device info: is_mobile: no

<7> [258.139581] i915 device info: is_lp: no

<7> [258.139582] i915 device info: require_force_probe: no

<7> [258.139583] i915 device info: is_dgfx: no

<7> [258.139584] i915 device info: has_64bit_reloc: yes

<7> [258.139585] i915 device info: has_64k_pages: no

<7> [258.139587] i915 device info: gpu_reset_clobbers_display: no

<7> [258.139588] i915 device info: has_reset_engine: yes

<7> [258.139589] i915 device info: has_3d_pipeline: yes

<7> [258.139590] i915 device info: has_4tile: no

<7> [258.139591] i915 device info: has_flat_ccs: no

<7> [258.139592] i915 device info: has_global_mocs: no

<7> [258.139598] i915 device info: has_gmd_id: no

<7> [258.139600] i915 device info: has_gt_uc: yes

<7> [258.139601] i915 device info: has_heci_pxp: no

<7> [258.139594] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] status updated from unknown to disconnected

<7> [258.139602] i915 device info: has_heci_gscfi: no

<7> [258.139603] i915 device info: has_guc_deprivilege: no

<7> [258.139604] i915 device info: has_l3_ccs_read: no

<7> [258.139605] i915 device info: has_l3_dpf: no

<7> [258.139606] i915 device info: has_llc: yes

<7> [258.139608] i915 device info: has_logical_ring_contexts: yes

<7> [258.139609] i915 device info: has_logical_ring_elsq: no

<7> [258.139611] i915 device info: has_media_ratio_mode: no

<7> [258.139613] i915 device info: has_mslice_steering: no

<7> [258.139614] i915 device info: has_oa_bpc_reporting: no

<7> [258.139615] i915 device info: has_oa_slice_contrib_limits: no

<7> [258.139616] i915 device info: has_oam: no

<7> [258.139618] i915 device info: has_one_eu_per_fuse_bit: no

<7> [258.139619] i915 device info: has_pxp: no

<7> [258.139620] i915 device info: has_rc6: yes

<7> [258.139621] i915 device info: has_rc6p: no

<7> [258.139622] i915 device info: has_rps: yes

<7> [258.139616] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [258.139624] i915 device info: has_runtime_pm: yes

<7> [258.139625] i915 device info: has_snoop: no

<7> [258.139626] i915 device info: has_coherent_ggtt: yes

<7> [258.139627] i915 device info: tuning_thread_rr_after_dep: no

<7> [258.139628] i915 device info: unfenced_needs_alignment: no

<7> [258.139629] i915 device info: hws_needs_physical: no

<7> [258.139632] i915 device info: has_pooled_eu: no

<7> [258.139633] i915 device info: cursor_needs_physical: no

<7> [258.139634] i915 device info: has_cdclk_crawl: no

<7> [258.139636] i915 device info: has_cdclk_squash: no

<7> [258.139637] i915 device info: has_ddi: yes

<7> [258.139638] i915 device info: has_dp_mst: yes

<7> [258.139632] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [258.139639] i915 device info: has_dsb: no

<7> [258.139641] i915 device info: has_fpga_dbg: yes

<7> [258.139642] i915 device info: has_gmch: no

<7> [258.139643] i915 device info: has_hotplug: yes

<7> [258.139644] i915 device info: has_hti: no

<7> [258.139645] i915 device info: has_ipc: yes

<7> [258.139647] i915 device info: has_overlay: no

<7> [258.139649] i915 device info: has_psr: yes

<7> [258.139650] i915 device info: has_psr_hw_tracking: yes

<7> [258.139651] i915 device info: overlay_needs_physical: no

<7> [258.139652] i915 device info: supports_tv: no

<7> [258.139654] i915 device info: has_hdcp: yes

<7> [258.139655] i915 device info: has_dmc: yes

<7> [258.139656] i915 device info: has_dsc: no

<7> [258.139657] i915 device info: rawclk rate: 24000 kHz

<7> [258.139659] i915 device info: iommu: disabled

<7> [258.139660] i915 device info: available engines: 40403

<7> [258.139662] i915 device info: slice total: 1, mask=0001

<7> [258.139663] i915 device info: subslice total: 3

<7> [258.139664] i915 device info: slice0: 3 subslices, mask=00000007

<7> [258.139666] i915 device info: slice1: 0 subslices, mask=00000000

<7> [258.139668] i915 device info: slice2: 0 subslices, mask=00000000

<7> [258.139669] i915 device info: EU total: 24

<7> [258.139670] i915 device info: EU per subslice: 8

<7> [258.139672] i915 device info: has slice power gating: no

<7> [258.139674] i915 device info: has subslice power gating: no

<7> [258.139675] i915 device info: has EU power gating: yes

<6> [258.139678] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [258.139680] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [258.139683] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [258.139686] i915: Performing live selftests with st_random_seed=0x8488d17 st_timeout=500

<6> [258.139704] i915: Running i915_gem_mman_live_selftests/igt_partial_tiling

<7> [258.139648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [258.139839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] status updated from unknown to disconnected

<7> [258.139862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [258.139879] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [258.139884] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [258.139888] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [258.139892] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [258.139896] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [258.139900] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [258.139937] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [258.139947] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [258.139969] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [258.139990] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [258.140618] [drm:drm_client_modeset_probe]

<7> [258.140682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [258.140702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [258.140916] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [258.140935] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2]

<7> [258.140953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:105:HDMI-A-2]

<7> [258.141153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:105:HDMI-A-2] disconnected

<7> [258.141171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1]

<7> [258.141188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:109:DP-1]

<7> [258.141428] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:109:DP-1] disconnected

<7> [258.141447] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3]

<7> [258.141488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:116:HDMI-A-3]

<7> [258.141689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:116:HDMI-A-3] disconnected

<7> [258.141707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2]

<7> [258.141724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:120:DP-2]

<7> [258.141910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:120:DP-2] disconnected

<7> [258.141928] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [258.141932] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [258.141936] [drm:drm_client_modeset_probe] connector 105 enabled? no

<7> [258.141940] [drm:drm_client_modeset_probe] connector 109 enabled? no

<7> [258.141943] [drm:drm_client_modeset_probe] connector 116 enabled? no

<7> [258.141947] [drm:drm_client_modeset_probe] connector 120 enabled? no

<7> [258.141977] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [258.141988] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [258.142010] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [258.142030] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [258.265478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [258.265793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [258.265948] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [258.266098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [258.266688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [258.671502] check_partial_mappings: timed out after tiling=0 stride=0

<7> [259.172338] check_partial_mappings: timed out after tiling=1 stride=262144

<7> [259.673349] check_partial_mappings: timed out after tiling=2 stride=262144

<6> [259.699456] i915: Running i915_gem_mman_live_selftests/igt_smoke_tiling

<6> [260.200618] igt_smoke_tiling: Completed 5509 trials

<6> [260.335169] i915: Running i915_gem_mman_live_selftests/igt_mmap_offset_exhaustion

<7> [260.335382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [260.335613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [260.336116] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<6> [260.362467] i915: Running i915_gem_mman_live_selftests/igt_mmap

<7> [260.362550] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [260.364416] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [260.365716] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [260.366654] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [260.369702] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [260.457345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [260.457507] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [260.457654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [260.458230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [260.893032] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [261.376450] i915: Running i915_gem_mman_live_selftests/igt_mmap_migrate

<6> [261.376461] i915: Running i915_gem_mman_live_selftests/igt_mmap_access

<7> [261.376494] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.377031] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.377434] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.377768] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [261.389445] i915: Running i915_gem_mman_live_selftests/igt_mmap_revoke

<7> [261.389482] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.390179] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [261.404435] i915: Running i915_gem_mman_live_selftests/igt_mmap_gpu

<7> [261.404494] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.405388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [261.405565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [261.406066] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [261.407635] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [261.418466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [261.418677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [261.418829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [261.418978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [261.419127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [261.438412] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [261.486766] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [261.528668] i915: probe of 0000:00:02.0 failed with error -25

<6> [261.776174] [IGT] i915_selftest: finished subtest mman, SUCCESS

Results for igt@i915_selftest@live@mman