Results for igt@core_hotunplug@unbind-rebind

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-gb7a2382f1 (x86_64) (Linux: 6.5.0-rc5-linus-v6.5-rc5-g52a93d39b17d+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: unbind-rebind
Opened device: /dev/dri/renderD128
Unloaded audio driver snd_hda_intel
Realoading snd_hda_intel
Subtest unbind-rebind: SUCCESS (1.728s)
Err 
Starting subtest: unbind-rebind
Subtest unbind-rebind: SUCCESS (1.728s)
Dmesg
<6> [109.101074] Console: switching to colour dummy device 80x25
<6> [109.101292] [IGT] core_hotunplug: executing
<7> [109.113072] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [109.113409] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]
<7> [109.113513] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [109.114515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.117561] [IGT] core_hotunplug: closing selected device instance
<7> [109.117811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.118503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.119774] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.119923] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.120069] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.120226] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.120375] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.120526] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.120698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.120858] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.121013] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.121165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.121336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [109.121497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [109.121673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<6> [109.123432] [IGT] core_hotunplug: starting subtest unbind-rebind
<7> [109.131239] [IGT] core_hotunplug: reopening DRM device for health check
<7> [109.131264] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [109.131637] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [109.138065] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [109.138258] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [109.138547] [IGT] core_hotunplug: closing health checked device instance
<7> [109.138855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.140011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.141236] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.141345] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.141448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.141564] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.141669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.141773] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.141876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.141980] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.142080] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.142182] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.142280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [109.142374] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [109.142462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [109.144321] [IGT] core_hotunplug: reopening render device for health check
<7> [109.144342] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [109.144715] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [109.151976] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [109.152200] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [109.152483] [IGT] core_hotunplug: closing health checked device instance
<7> [109.152697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.153356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.153479] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.153608] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.153715] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.153818] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.153921] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.154022] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.154126] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.154230] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.154331] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.154432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.154538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [109.154640] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [109.154730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [109.282834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.284005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.285194] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.285313] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.285425] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.285539] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.285646] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.285753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.285858] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.285967] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.286073] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.286180] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.286273] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [109.286369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [109.286527] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [109.299692] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [109.299827] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [109.299930] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [109.300026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A
<7> [109.300127] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [109.300223] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [109.300316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [109.300407] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B
<7> [109.300497] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [109.300604] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [109.300700] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [109.300795] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C
<7> [109.300889] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [109.300984] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [109.301078] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [109.301169] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D
<7> [109.301260] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [109.301352] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [109.301445] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [109.301545] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E
<7> [109.301637] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [109.301730] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [109.301825] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [109.301918] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F
<7> [109.302013] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [109.302107] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [109.302199] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [109.302288] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G
<7> [109.302380] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [109.302473] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [109.302576] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [109.302668] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H
<7> [109.302759] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [109.302853] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [109.302946] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [109.303036] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I
<7> [109.303615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [109.303792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [109.303898] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [109.303991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [109.304091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [109.304185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [109.374440] [IGT] core_hotunplug: unbinding the driver from the device
<7> [109.374668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.375705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [109.376935] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.377286] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.377669] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.378030] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.378387] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.378790] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.379142] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.379574] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.379977] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.380394] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.380820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [109.381221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [109.381785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [109.382189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [109.414495] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]
<7> [109.499572] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper
<7> [109.499862] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind
<7> [109.603561] [IGT] core_hotunplug: rebinding the driver to the device
<7> [109.605486] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K
<7> [109.605788] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)
<7> [109.606024] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH
<7> [109.606248] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT
<7> [109.606501] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz
<7> [109.606677] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005
<7> [109.606809] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001
<7> [109.607623] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
<7> [109.607750] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
<7> [109.607864] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M
<6> [109.607981] i915 0000:00:02.0: [drm] VT-d active for gfx access
<6> [109.608017] i915 0000:00:02.0: vgaarb: deactivate vga console
<6> [109.608415] i915 0000:00:02.0: [drm] Using Transparent Hugepages
<7> [109.608433] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000021200087
<7> [109.608651] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K
<7> [109.609192] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x16a0b018
<7> [109.609364] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0
<7> [109.609498] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported
<7> [109.609645] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported
<7> [109.609773] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported
<7> [109.609907] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)
<7> [109.610030] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4
<7> [109.610112] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no
<7> [109.610192] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=4801 tRP=39 tRDPRE=17 tRAS=76 tRCD=39 tRC=115
<7> [109.610332] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32
<7> [109.610464] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=48
<7> [109.610603] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=64
<7> [109.610738] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=15471 peakbw: 76816
<7> [109.610874] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133
<7> [109.610997] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=51200
<7> [109.611117] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=68267
<7> [109.611238] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21375 peakbw: 76816
<7> [109.611355] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133
<7> [109.611464] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=51200
<7> [109.611589] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=68267
<7> [109.611706] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=26415 peakbw: 76816
<7> [109.611814] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133
<7> [109.611921] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=51200
<7> [109.612028] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=68267
<7> [109.612135] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29946 peakbw: 76816
<7> [109.612239] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133
<7> [109.612337] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=51200
<7> [109.612434] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=68267
<7> [109.612539] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=32092 peakbw: 76816
<7> [109.612642] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133
<7> [109.612738] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=51200
<7> [109.612835] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=68267
<7> [109.612928] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=33283 peakbw: 76816
<7> [109.613021] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133
<7> [109.613111] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=51200
<7> [109.613198] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=68267
<7> [109.613686] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
<7> [109.613797] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 250
<7> [109.613897] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)
<7> [109.613990] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)
<7> [109.614083] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)
<7> [109.614175] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)
<7> [109.614267] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 812, min size 812)
<7> [109.614359] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)
<7> [109.614448] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers
<7> [109.614557] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)
<7> [109.614656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)
<7> [109.614744] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)
<7> [109.614836] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)
<7> [109.614927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)
<7> [109.615015] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)
<7> [109.615105] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7> [109.615194] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
<7> [109.615280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806
<7> [109.615367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [109.615453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [109.615596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [109.615695] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6
<7> [109.615786] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping
<7> [109.615876] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port E trying to use the same DDC pin (0xa) as port A, disabling port A DVI/HDMI support
<7> [109.615965] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [109.616053] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0
<7> [109.616143] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [109.616232] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0
<7> [109.616319] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI max TMDS clock: 297000 kHz
<7> [109.616407] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [109.616495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0
<7> [109.616594] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [109.616681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0
<7> [109.616766] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [109.616854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0
<7> [109.616941] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a
<7> [109.617038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [109.617174] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.617278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.617381] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.617483] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.617597] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.617706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.617841] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.617950] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.618052] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.618154] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.618240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1
<7> [109.618334] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [109.618432] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1
<7> [109.618558] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic.
<7> [109.618658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [109.618747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [109.618836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00
<7> [109.618952] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.619059] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [109.619169] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.619269] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [109.619371] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.619474] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [109.619584] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.619686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [109.619788] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [109.619889] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [109.619977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [109.620066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [109.620158] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4
<7> [109.620248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_5
<7> [109.620414] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adls_dmc_ver2_01.bin
<7> [109.622096] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
<6> [109.623321] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adls_dmc_ver2_01.bin (v2.1)
<7> [109.623321] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 20 us
<7> [109.623433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)
<7> [109.623521] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 22 (22.0 usec)
<7> [109.623626] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 33 (33.0 usec)
<7> [109.623707] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 33 (33.0 usec)
<7> [109.623789] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)
<7> [109.623868] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 48 (48.0 usec)
<7> [109.623949] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 101 (101.0 usec)
<7> [109.624028] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 147 (147.0 usec)
<7> [109.625624] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available.
<7> [109.626445] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [109.626563] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind
<6> [109.626657] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
<7> [109.626721] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz
<7> [109.626816] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz
<7> [109.626924] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)
<7> [109.627012] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]
<7> [109.627105] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2
<7> [109.627195] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2
<7> [109.627286] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless
<7> [109.627379] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7> [109.627467] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300
<7> [109.627566] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002
<7> [109.627656] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName
<7> [109.627748] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz
<7> [109.627837] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7> [109.627935] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0
<7> [109.628079] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000
<7> [109.628158] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7> [109.628232] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7> [109.628303] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
<7> [109.628372] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200
<7> [109.628523] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7> [109.628687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A
<7> [109.628908] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on
<7> [109.629007] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle
<7> [109.629127] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [109.629218] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete
<7> [109.629347] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
<7> [109.629434] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled
<7> [109.864548] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [109.893537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [109.922536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [109.951536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [109.980537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.009536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.038537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.067536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.096537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.125537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.154536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.183536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.212537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.241537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.270536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.299536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.328537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.357538] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.386536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.415536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.444537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.473537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.502536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.531536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.560537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.589537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.618536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.647536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.676536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.705537] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.734536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.763536] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)
<7> [110.763630] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110
<6> [110.763644] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP
<7> [110.763671] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off
<7> [110.763802] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7> [110.763878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A
<7> [110.764040] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI TC1/PHY B] using AUX D (VBT)
<7> [110.764127] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:133:DDI TC1/PHY B]
<7> [110.764369] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI TC1/PHY B]
<7> [110.764453] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI TC1/PHY B] Using DDC pin 0x9 (VBT)
<7> [110.764598] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:150:DDI TC2/PHY C] using AUX E (VBT)
<7> [110.764678] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:150:DDI TC2/PHY C]
<7> [110.764841] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:150:DDI TC2/PHY C]
<7> [110.764912] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:150:DDI TC2/PHY C] Using DDC pin 0xa (VBT)
<7> [110.765022] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:160:DDI TC3/PHY D] using AUX F (VBT)
<7> [110.765096] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:160:DDI TC3/PHY D]
<7> [110.765252] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:160:DDI TC3/PHY D]
<7> [110.765324] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:160:DDI TC3/PHY D] Using DDC pin 0xb (VBT)
<7> [110.765429] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:170:DDI TC4/PHY E] using AUX G (VBT)
<7> [110.765508] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:170:DDI TC4/PHY E]
<7> [110.765678] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:170:DDI TC4/PHY E]
<7> [110.765750] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:170:DDI TC4/PHY E] Using DDC pin 0xc (VBT)
<7> [110.766091] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled
<7> [110.766210] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled
<7> [110.766300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
<7> [110.766385] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A
<7> [110.766468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A
<7> [110.766562] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A
<7> [110.766651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A
<7> [110.766736] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A
<7> [110.766822] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B
<7> [110.766904] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B
<7> [110.766986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B
<7> [110.767070] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B
<7> [110.767154] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B
<7> [110.767236] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B
<7> [110.767319] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI TC1/PHY B] hw state readout: disabled, pipe A
<7> [110.767399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:135:DP-MST A] hw state readout: disabled, pipe A
<7> [110.767478] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:136:DP-MST B] hw state readout: disabled, pipe B
<7> [110.767568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DDI TC2/PHY C] hw state readout: disabled, pipe A
<7> [110.767652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:152:DP-MST A] hw state readout: disabled, pipe A
<7> [110.767735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:153:DP-MST B] hw state readout: disabled, pipe B
<7> [110.767820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:160:DDI TC3/PHY D] hw state readout: disabled, pipe A
<7> [110.767899] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:162:DP-MST A] hw state readout: disabled, pipe A
<7> [110.767978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:163:DP-MST B] hw state readout: disabled, pipe B
<7> [110.768059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:170:DDI TC4/PHY E] hw state readout: disabled, pipe A
<7> [110.768137] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:172:DP-MST A] hw state readout: disabled, pipe A
<7> [110.768215] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:173:DP-MST B] hw state readout: disabled, pipe B
<7> [110.768300] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [110.768387] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [110.768472] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [110.768562] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [110.768693] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:DP-1] hw state readout: disabled
<7> [110.768789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:145:HDMI-A-1] hw state readout: disabled
<7> [110.768875] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:151:DP-2] hw state readout: disabled
<7> [110.768961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:157:HDMI-A-2] hw state readout: disabled
<7> [110.769046] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:161:DP-3] hw state readout: disabled
<7> [110.769130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:167:HDMI-A-3] hw state readout: disabled
<7> [110.769212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:171:DP-4] hw state readout: disabled
<7> [110.769298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:177:HDMI-A-4] hw state readout: disabled
<7> [110.769377] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz
<7> [110.769457] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz
<7> [110.769544] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz
<7> [110.769630] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz
<7> [110.769712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz
<7> [110.769794] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz
<7> [110.769873] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0
<7> [110.769961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz
<7> [110.770039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz
<7> [110.770117] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz
<7> [110.770196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz
<7> [110.770275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz
<7> [110.770354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz
<7> [110.770434] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0
<7> [110.770581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]
<7> [110.770673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]
<7> [110.770762] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [110.770841] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [110.775190] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)
<7> [110.775280] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture
<7> [110.775346] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]
<7> [110.775414] MCR Steering: Default steering: group=0x0, instance=0x0
<7> [110.775423] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global
<7> [110.775925] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 10 engine workarounds on rcs'0
<7> [110.776007] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0
<7> [110.776086] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0
<7> [110.776581] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0
<7> [110.776667] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0
<7> [110.776749] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0
<7> [110.777048] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0
<7> [110.777129] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0
<7> [110.777428] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2
<7> [110.777510] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2
<7> [110.777751] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0
<7> [110.777835] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0
<7> [110.778526] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)
<7> [110.778644] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 4 ext-regs.
<7> [110.778754] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset
<7> [110.792183] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f
<7> [110.792277] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000
<7> [110.792365] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4
<7> [110.792450] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3
<7> [110.792555] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8
<7> [110.792642] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0xa7800004
<7> [110.792727] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0
<7> [110.792811] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0
<7> [110.792894] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0
<7> [110.792977] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0
<7> [110.793062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0
<7> [110.793144] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0
<7> [110.793227] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0
<7> [110.793309] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0
<7> [110.793392] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no
<6> [110.794702] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.5.1
<6> [110.794705] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
<7> [110.796562] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 0ms, freq = 1350MHz, before = 1350MHz, status = 0x8002F0EC, count = 0, ret = 0
<7> [110.796853] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled
<6> [110.797782] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
<6> [110.799074] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled
<6> [110.799075] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled
<6> [110.799731] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled
<7> [110.802971] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping
<7> [110.803069] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping
<7> [110.803154] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
<7> [110.803246] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [110.803625] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0
<7> [110.803689] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0
<7> [110.803749] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0
<7> [110.803808] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1
<7> [110.803867] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0
<7> [110.806290] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY B bus for card0-DP-1
<7> [110.806793] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:DP-1] generating connector hotplug event
<7> [110.806985] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:145:HDMI-A-1] generating connector hotplug event
<7> [110.807165] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY C bus for card0-DP-2
<7> [110.807512] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:151:DP-2] generating connector hotplug event
<7> [110.807697] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:157:HDMI-A-2] generating connector hotplug event
<7> [110.807874] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY D bus for card0-DP-3
<7> [110.808168] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:161:DP-3] generating connector hotplug event
<7> [110.808338] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:167:HDMI-A-3] generating connector hotplug event
<7> [110.808511] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY E bus for card0-DP-4
<7> [110.808813] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:171:DP-4] generating connector hotplug event
<7> [110.808979] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:177:HDMI-A-4] generating connector hotplug event
<6> [110.809001] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
<7> [110.810107] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 8 outputs detected
<6> [110.818847] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6> [110.820895] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
<7> [110.821372] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [110.821680] [drm:drm_client_modeset_probe]
<7> [110.821714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<7> [110.821680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
<7> [110.821734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [110.821833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
<7> [110.822018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
<7> [110.822167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [110.822285] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
<7> [110.822305] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [110.822423] i915 device info: pciid=0xa780 rev=0x04 platform=ALDERLAKE_S (subplatform=0x1) gen=12
<7> [110.822426] i915 device info: graphics version: 12
<7> [110.822428] i915 device info: media version: 12
<7> [110.822430] i915 device info: display version: 12
<7> [110.822431] i915 device info: graphics stepping: D0
<7> [110.822433] i915 device info: media stepping: D0
<7> [110.822434] i915 device info: display stepping: D0
<7> [110.822438] i915 device info: base die stepping: **
<7> [110.822440] i915 device info: gt: 0
<7> [110.822442] i915 device info: memory-regions: 0x21
<7> [110.822443] i915 device info: page-sizes: 0x211000
<7> [110.822445] i915 device info: platform: ALDERLAKE_S
<7> [110.822447] i915 device info: ppgtt-size: 48
<7> [110.822449] i915 device info: ppgtt-type: 2
<7> [110.822450] i915 device info: dma_mask_size: 39
<7> [110.822452] i915 device info: is_mobile: no
<7> [110.822454] i915 device info: is_lp: no
<7> [110.822456] i915 device info: require_force_probe: no
<7> [110.822457] i915 device info: is_dgfx: no
<7> [110.822459] i915 device info: has_64bit_reloc: yes
<7> [110.822461] i915 device info: has_64k_pages: no
<7> [110.822463] i915 device info: gpu_reset_clobbers_display: no
<7> [110.822464] i915 device info: has_reset_engine: yes
<7> [110.822466] i915 device info: has_3d_pipeline: yes
<7> [110.822468] i915 device info: has_4tile: no
<7> [110.822469] i915 device info: has_flat_ccs: no
<7> [110.822471] i915 device info: has_global_mocs: yes
<7> [110.822472] i915 device info: has_gmd_id: no
<7> [110.822474] i915 device info: has_gt_uc: yes
<7> [110.822475] i915 device info: has_heci_pxp: no
<7> [110.822477] i915 device info: has_heci_gscfi: no
<7> [110.822478] i915 device info: has_guc_deprivilege: no
<7> [110.822479] i915 device info: has_l3_ccs_read: no
<7> [110.822481] i915 device info: has_l3_dpf: no
<7> [110.822483] i915 device info: has_llc: yes
<7> [110.822484] i915 device info: has_logical_ring_contexts: yes
<7> [110.822486] i915 device info: has_logical_ring_elsq: yes
<7> [110.822488] i915 device info: has_media_ratio_mode: no
<7> [110.822490] i915 device info: has_mslice_steering: no
<7> [110.822492] i915 device info: has_oa_bpc_reporting: no
<7> [110.822494] i915 device info: has_oa_slice_contrib_limits: no
<7> [110.822496] i915 device info: has_oam: no
<7> [110.822497] i915 device info: has_one_eu_per_fuse_bit: no
<7> [110.822499] i915 device info: has_pxp: yes
<7> [110.822501] i915 device info: has_rc6: yes
<7> [110.822503] i915 device info: has_rc6p: no
<7> [110.822504] i915 device info: has_rps: yes
<7> [110.822506] i915 device info: has_runtime_pm: yes
<7> [110.822444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [110.822508] i915 device info: has_snoop: no
<7> [110.822509] i915 device info: has_coherent_ggtt: no
<7> [110.822511] i915 device info: tuning_thread_rr_after_dep: no
<7> [110.822512] i915 device info: unfenced_needs_alignment: no
<7> [110.822513] i915 device info: hws_needs_physical: no
<7> [110.822515] i915 device info: has_pooled_eu: no
<7> [110.822516] i915 device info: cursor_needs_physical: no
<7> [110.822517] i915 device info: has_cdclk_crawl: no
<7> [110.822519] i915 device info: has_cdclk_squash: no
<7> [110.822520] i915 device info: has_ddi: yes
<7> [110.822522] i915 device info: has_dp_mst: yes
<7> [110.822523] i915 device info: has_dsb: yes
<7> [110.822524] i915 device info: has_fpga_dbg: yes
<7> [110.822526] i915 device info: has_gmch: no
<7> [110.822527] i915 device info: has_hotplug: yes
<7> [110.822612] i915 device info: has_hti: yes
<7> [110.822614] i915 device info: has_ipc: yes
<7> [110.822615] i915 device info: has_overlay: no
<7> [110.822623] i915 device info: has_psr: yes
<7> [110.822625] i915 device info: has_psr_hw_tracking: no
<7> [110.822626] i915 device info: overlay_needs_physical: no
<7> [110.823719] i915 device info: supports_tv: no
<7> [110.823720] i915 device info: has_hdcp: yes
<7> [110.823722] i915 device info: has_dmc: yes
<7> [110.823724] i915 device info: has_dsc: yes
<7> [110.823725] i915 device info: rawclk rate: 19200 kHz
<7> [110.823728] i915 device info: iommu: enabled
<7> [110.823730] i915 device info: available engines: 41403
<7> [110.823732] i915 device info: slice total: 1, mask=0001
<7> [110.823734] i915 device info: subslice total: 2
<7> [110.823736] i915 device info: slice0: 2 subslices, mask=00000003
<7> [110.823738] i915 device info: EU total: 32
<7> [110.823740] i915 device info: EU per subslice: 16
<7> [110.823741] i915 device info: has slice power gating: yes
<7> [110.823743] i915 device info: has subslice power gating: no
<7> [110.823744] i915 device info: has EU power gating: no
<6> [110.823746] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled
<6> [110.823747] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled
<6> [110.823748] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
<7> [110.823777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
<7> [110.824934] i915 0000:00:02.0: [drm:hsw_wait_for_power_well_disable [i915]] PW_2 forced on (bios:1 driver:0 kvmr:0 debug:0)
<7> [110.825072] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] status updated from unknown to disconnected
<7> [110.825201] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [110.825217] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [110.825231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [110.826250] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] status updated from unknown to disconnected
<7> [110.826265] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [110.826275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [110.826284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [110.827333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] status updated from unknown to disconnected
<7> [110.827344] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [110.827352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [110.827361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [110.828520] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] status updated from unknown to disconnected
<7> [110.828539] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [110.828547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [110.828554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [110.829712] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] status updated from unknown to disconnected
<7> [110.829723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [110.829731] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [110.829739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [110.830909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] status updated from unknown to disconnected
<7> [110.830919] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [110.830927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [110.830934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [110.832101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] status updated from unknown to disconnected
<7> [110.832112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [110.832121] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [110.832128] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [110.833299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] status updated from unknown to disconnected
<7> [110.833364] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [110.833377] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [110.833381] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [110.833383] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [110.833385] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [110.833386] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [110.833388] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [110.833390] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [110.833391] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [110.833393] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [110.833414] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [110.833423] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [110.833438] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [110.833455] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [110.833642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<6> [110.833972] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100
<7> [110.834460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [110.835731] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.835855] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [110.835965] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.836165] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [110.836382] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.836489] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [110.836614] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.836720] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [110.836823] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.836927] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [110.837055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
<7> [110.837167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
<7> [110.837255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
<7> [110.838521] [drm:drm_client_modeset_probe]
<7> [110.838601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<6> [110.838605] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
<7> [110.838620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [110.838705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off
<7> [110.839641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00
<7> [110.840862] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.841012] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.
<7> [110.841180] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.841324] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.
<7> [110.841466] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.841622] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.
<7> [110.841766] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.841913] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.
<7> [110.842053] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY E Voltage/Process Info : 0.85V dot0 (low-voltage)
<7> [110.842192] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY E already enabled, won't reprogram it.
<7> [110.842323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2
<7> [110.842426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3
<7> [110.842690] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [110.842706] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [110.842659] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010
<7> [110.842720] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [110.842878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [110.842891] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [110.842904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [110.843053] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [110.843065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [110.843078] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [110.843226] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [110.843238] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [110.843250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [110.843393] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [110.843405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [110.843418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [110.843571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [110.843584] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [110.843598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [110.843742] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [110.843755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [110.843767] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [110.843911] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [110.843923] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [110.843926] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [110.843929] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [110.843932] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [110.843934] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [110.843936] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [110.843938] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [110.843940] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [110.843943] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [110.843964] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [110.843971] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [110.843984] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [110.844001] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [110.844046] [drm:drm_client_modeset_probe]
<7> [110.844075] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1]
<7> [110.844088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:134:DP-1]
<7> [110.844231] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:DP-1] disconnected
<7> [110.844243] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1]
<7> [110.844255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:145:HDMI-A-1]
<7> [110.844395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:145:HDMI-A-1] disconnected
<7> [110.844406] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2]
<7> [110.844418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:151:DP-2]
<7> [110.844562] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:151:DP-2] disconnected
<7> [110.844574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2]
<7> [110.844586] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:157:HDMI-A-2]
<7> [110.844722] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:157:HDMI-A-2] disconnected
<7> [110.844734] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3]
<7> [110.844745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:161:DP-3]
<7> [110.844878] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:161:DP-3] disconnected
<7> [110.844889] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3]
<7> [110.844901] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:167:HDMI-A-3]
<7> [110.845036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:167:HDMI-A-3] disconnected
<7> [110.845047] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4]
<7> [110.845058] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:171:DP-4]
<7> [110.845192] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:171:DP-4] disconnected
<7> [110.845203] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4]
<7> [110.845215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:177:HDMI-A-4]
<7> [110.845354] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:177:HDMI-A-4] disconnected
<7> [110.845366] [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [110.845370] [drm:drm_client_modeset_probe] connector 134 enabled? no
<7> [110.845372] [drm:drm_client_modeset_probe] connector 145 enabled? no
<7> [110.845375] [drm:drm_client_modeset_probe] connector 151 enabled? no
<7> [110.845378] [drm:drm_client_modeset_probe] connector 157 enabled? no
<7> [110.845380] [drm:drm_client_modeset_probe] connector 161 enabled? no
<7> [110.845383] [drm:drm_client_modeset_probe] connector 167 enabled? no
<7> [110.845385] [drm:drm_client_modeset_probe] connector 171 enabled? no
<7> [110.845388] [drm:drm_client_modeset_probe] connector 177 enabled? no
<7> [110.845409] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [110.845416] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [110.845428] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<6> [110.845444] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
<7> [110.845480] [IGT] core_hotunplug: reopening DRM device for health check
<7> [110.845509] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [110.845995] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [110.848097] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [110.848403] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [110.848731] [IGT] core_hotunplug: closing health checked device instance
<7> [110.848908] [IGT] core_hotunplug: reopening render device for health check
<7> [110.848929] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [110.849288] [IGT] core_hotunplug: running i915 GPU healthcheck
<7> [110.851016] [IGT] core_hotunplug: running device sysfs healthcheck
<7> [110.851275] [IGT] core_hotunplug: running i915 device perf healthcheck
<7> [110.851590] [IGT] core_hotunplug: closing health checked device instance
<6> [110.851764] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS
<6> [110.852220] [IGT] core_hotunplug: exiting, ret=0
<6> [110.863473] snd_hda_codec_realtek hdaudioC0D0: ALC711: SKU not ready 0x00000000
<6> [110.864015] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC711: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
<6> [110.864018] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [110.864020] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
<6> [110.864022] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
<6> [110.864023] snd_hda_codec_realtek hdaudioC0D0: inputs:
<6> [110.864025] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x13
<6> [110.864026] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
<6> [110.864028] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Created at 2023-08-07 00:00:44