<5>[ 0.000000] Linux version 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 30 20:54:56 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca40fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca41000-0x000000006fdb8fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb9000-0x000000006fedffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe15000 SMBIOS=0x6cb18000 MEMATTR=0x67f8e018 ESRT=0x67b9e198 TPMEventLog=0x67eab018 <6>[ 0.000000] efi: Remove mem282: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000388] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000390] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000392] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000393] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000396] esrt: Reserving ESRT space from 0x0000000067b9e198 to 0x0000000067b9e310. <7>[ 0.000402] e820: update [mem 0x67b9e000-0x67b9efff] usable ==> reserved <6>[ 0.000418] Using GB pages for direct mapping <6>[ 0.001161] printk: log_buf_len: 1048576 bytes <6>[ 0.001163] printk: early log buf free: 259064(98%) <6>[ 0.001164] Secure boot disabled <6>[ 0.001166] ACPI: Early table checksum verification disabled <6>[ 0.001168] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001172] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001177] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001181] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001183] ACPI: FACS 0x000000006FDFA000 000040 <6>[ 0.001185] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001188] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001190] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001192] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001194] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001196] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001199] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001201] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001203] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001205] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001207] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001209] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001214] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001216] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001218] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001220] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001222] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001224] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001226] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001228] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001231] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001233] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001235] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001237] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001239] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001241] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001243] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001245] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001248] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001250] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001252] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001254] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001258] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001260] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001265] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001267] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001269] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001271] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001273] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001274] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001275] ACPI: Reserving FACS table memory at [mem 0x6fdfa000-0x6fdfa03f] <6>[ 0.001275] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001276] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001277] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001277] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001278] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001278] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001279] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001280] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001280] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001281] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001281] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001282] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001283] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001283] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001284] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001284] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001285] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001288] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001289] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001289] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001290] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001291] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001292] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001292] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001293] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001294] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001294] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001295] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001295] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001296] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001298] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001299] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001300] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001311] Setting APIC routing to cluster x2apic. <6>[ 0.045597] Zone ranges: <6>[ 0.045599] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045600] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045602] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045603] Movable zone start for each node <6>[ 0.045604] Early memory node ranges <6>[ 0.045604] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045605] node 0: [mem 0x0000000000100000-0x000000006ca40fff] <6>[ 0.045606] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045607] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045609] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045612] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045637] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048056] On node 0, zone DMA32: 13758 pages in unavailable ranges <6>[ 0.090271] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090653] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090659] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090697] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090699] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090701] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090704] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090705] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090714] e820: update [mem 0x67fa7000-0x67fc1fff] usable ==> reserved <6>[ 0.090720] TSC deadline timer available <6>[ 0.090721] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090730] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090732] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090733] PM: hibernation: Registered nosave memory: [mem 0x67b9e000-0x67b9efff] <6>[ 0.090734] PM: hibernation: Registered nosave memory: [mem 0x67fa7000-0x67fc1fff] <6>[ 0.090735] PM: hibernation: Registered nosave memory: [mem 0x6ca41000-0x6fdb8fff] <6>[ 0.090735] PM: hibernation: Registered nosave memory: [mem 0x6fdb9000-0x6fedffff] <6>[ 0.090736] PM: hibernation: Registered nosave memory: [mem 0x6fee0000-0x6fffefff] <6>[ 0.090737] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090737] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090738] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090738] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090740] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090744] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093852] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095323] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095327] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095329] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095334] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095340] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095351] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095418] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095448] random: crng init done <6>[ 0.098254] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099650] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099751] Built 1 zonelists, mobility grouping on. Total pages: 8177208 <6>[ 0.099754] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099755] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100475] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100490] software IO TLB: area num 32. <6>[ 0.751776] Memory: 32435052K/33228672K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793364K reserved, 0K cma-reserved) <4>[ 0.751779] ********************************************************** <4>[ 0.751780] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.751780] ** ** <4>[ 0.751781] ** This system shows unhashed kernel memory addresses ** <4>[ 0.751781] ** via the console, logs, and other interfaces. This ** <4>[ 0.751782] ** might reduce the security of your system. ** <4>[ 0.751782] ** ** <4>[ 0.751783] ** If you see this message and you are not debugging ** <4>[ 0.751783] ** the kernel, report this immediately to your system ** <4>[ 0.751783] ** administrator! ** <4>[ 0.751784] ** ** <4>[ 0.751784] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.751785] ********************************************************** <6>[ 0.751952] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.752414] Dynamic Preempt: full <6>[ 0.752637] Running RCU self tests <6>[ 0.752638] Running RCU synchronous self tests <6>[ 0.752680] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.752681] rcu: RCU lockdep checking is enabled. <6>[ 0.752682] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.752683] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.752683] Trampoline variant of Tasks RCU enabled. <6>[ 0.752684] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.752685] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.752750] Running RCU synchronous self tests <6>[ 0.756608] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.756972] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.757300] Console: colour dummy device 80x25 <6>[ 0.757313] printk: console [tty1] enabled <6>[ 0.759222] printk: console [ttyS0] enabled <4>[ 2.239704] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.247428] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.251515] ... MAX_LOCK_DEPTH: 48 <4>[ 2.255691] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.260045] ... CLASSHASH_SIZE: 4096 <4>[ 2.264397] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.268835] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.273358] ... CHAINHASH_SIZE: 65536 <4>[ 2.277797] memory used by lock dependency info: 9461 kB <4>[ 2.283182] memory used for stack traces: 8320 kB <4>[ 2.287965] per task-struct memory footprint: 1920 bytes <6>[ 2.293364] ACPI: Core revision 20230331 <6>[ 2.298220] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.307397] APIC: Switch to symmetric I/O mode setup <6>[ 2.312405] DMAR: Host address width 42 <6>[ 2.316283] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.321651] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.330449] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.335801] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.344600] DMAR: SATC flags: 0x1 <6>[ 2.347962] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.354343] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.359772] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.370133] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.380181] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.390309] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.400803] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.401862] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.402802] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.403989] process: using mwait in idle threads <6>[ 2.404805] CET detected: Indirect Branch Tracking enabled <6>[ 2.405803] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.406801] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.408806] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.409806] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.410802] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.411806] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.412805] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.413815] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.414804] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.415803] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.416802] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.417804] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.418802] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.419802] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.432246] Freeing SMP alternatives memory: 36K <6>[ 2.432803] pid_max: default: 32768 minimum: 301 <6>[ 2.441967] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.442855] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.445225] Running RCU synchronous self tests <6>[ 2.445803] Running RCU synchronous self tests <6>[ 2.446971] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.448239] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.448836] Running RCU-tasks wait API self tests <6>[ 2.557814] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.558920] core: cpu_core PMU driver: <6>[ 2.559802] ... version: 5 <6>[ 2.560802] ... bit width: 48 <6>[ 2.563800] ... generic registers: 8 <6>[ 2.564802] ... value mask: 0000ffffffffffff <6>[ 2.565816] ... max period: 00007fffffffffff <6>[ 2.566803] ... fixed-purpose events: 4 <6>[ 2.567801] ... event mask: 0000000f000000ff <6>[ 2.568859] signal: max sigframe size: 3632 <6>[ 2.569820] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.570873] rcu: Hierarchical SRCU implementation. <6>[ 2.571802] rcu: Max phase no-delay instances is 400. <6>[ 2.574769] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.575347] smp: Bringing up secondary CPUs ... <6>[ 2.576092] smpboot: x86: Booting SMP configuration: <6>[ 2.576812] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.625688] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.625688] ... version: 5 <6>[ 1.625688] ... bit width: 48 <6>[ 1.625688] ... generic registers: 8 <6>[ 1.625688] ... value mask: 0000ffffffffffff <6>[ 1.625688] ... max period: 00007fffffffffff <6>[ 1.625688] ... fixed-purpose events: 3 <6>[ 1.625688] ... event mask: 00000007000000ff <4>[ 2.633085] #1 #3 #5 #7 #9 #11 <6>[ 2.637871] smp: Brought up 1 node, 22 CPUs <6>[ 2.639802] smpboot: Max logical packages: 1 <6>[ 2.640801] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.646977] devtmpfs: initialized <6>[ 2.648822] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb9000-0x6fedffff] (1208320 bytes) <6>[ 2.650225] Running RCU synchronous self tests <6>[ 2.650816] Running RCU synchronous self tests <6>[ 2.651868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.652816] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.654073] pinctrl core: initialized pinctrl subsystem <6>[ 2.655230] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.656938] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.656940] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.657804] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.658855] cpuidle: using governor menu <6>[ 2.660875] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.662038] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.662815] PCI: not using MMCONFIG <6>[ 2.663810] PCI: Using configuration type 1 for base access <4>[ 2.666108] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.667877] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.668880] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.669812] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.670808] Callback from call_rcu_tasks() invoked. <6>[ 2.670972] cryptd: max_cpu_qlen set to 1000 <6>[ 2.689795] raid6: avx2x4 gen() 54755 MB/s <6>[ 2.707795] raid6: avx2x2 gen() 56285 MB/s <6>[ 2.725795] raid6: avx2x1 gen() 55092 MB/s <6>[ 2.726801] raid6: using algorithm avx2x2 gen() 56285 MB/s <6>[ 2.744795] raid6: .... xor() 39270 MB/s, rmw enabled <6>[ 2.745802] raid6: using avx2x2 recovery algorithm <6>[ 2.747078] ACPI: Added _OSI(Module Device) <6>[ 2.747802] ACPI: Added _OSI(Processor Device) <6>[ 2.748801] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.749801] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.129067] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.140933] ACPI: EC: EC started <6>[ 3.141795] ACPI: EC: interrupt blocked <6>[ 3.147025] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.147803] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.412894] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 4.968101] ACPI: Interpreter enabled <6>[ 4.968915] ACPI: PM: (supports S0 S4 S5) <6>[ 4.969804] ACPI: Using IOAPIC for interrupt routing <6>[ 4.970944] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.001484] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.001820] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.002807] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.027993] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.028794] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.071703] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.191618] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.198015] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.215154] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.222487] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.235212] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.241199] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.247779] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.253374] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.313834] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.315078] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.316083] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.603566] ACPI: \_TZ_.FN00: New power resource <6>[ 5.604338] ACPI: \_TZ_.FN01: New power resource <6>[ 5.605349] ACPI: \_TZ_.FN02: New power resource <6>[ 5.606323] ACPI: \_TZ_.FN03: New power resource <6>[ 5.607319] ACPI: \_TZ_.FN04: New power resource <6>[ 5.611602] ACPI: \PIN_: New power resource <6>[ 5.614212] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.614813] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.619014] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.625939] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.634780] PCI host bridge to bus 0000:00 <6>[ 5.634805] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.635806] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.636805] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.637807] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.638806] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.639808] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.649173] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.650314] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.650817] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.651814] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.652848] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.653806] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 5.654850] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 5.656874] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 5.657819] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 5.659896] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 5.660813] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 5.661823] pci 0000:00:05.0: enabling Extended Tags <6>[ 5.663560] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 5.663936] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 5.668750] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 5.669039] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 5.673336] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 5.674025] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 5.678372] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 5.678820] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 5.680179] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 5.680812] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 5.681823] pci 0000:00:0a.0: enabling Extended Tags <6>[ 5.682990] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 5.683814] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 5.684818] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 5.686180] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 5.686821] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 5.687881] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 5.690247] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 5.690822] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 5.691816] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 5.692865] pci 0000:00:0d.3: supports D1 D2 <6>[ 5.693802] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 5.695906] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 5.696817] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 5.697866] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 5.701032] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 5.701819] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 5.702881] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 5.705501] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 5.705821] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 5.706815] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 5.708107] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 5.708852] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.711074] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 5.711851] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.714091] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 5.714855] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.717086] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 5.717853] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.720074] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 5.720826] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 5.721895] pci 0000:00:16.0: PME# supported from D3hot <6>[ 5.724970] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 5.725815] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 5.726808] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 5.728113] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 5.728850] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.730417] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 5.730850] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 5.733039] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 5.735064] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 5.735847] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 5.736859] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 5.737923] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 5.739158] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 5.739825] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 5.740830] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 5.742845] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 5.743837] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 5.745095] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 5.745829] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 5.746952] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 5.748966] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 5.749856] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 5.751604] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 5.751808] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 5.752944] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 5.753828] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 5.754828] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 5.755939] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 5.756826] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 5.757828] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 5.758843] pci_bus 0000:00: on NUMA node 0 <6>[ 8.672800] Low-power S0 idle used by default for system suspend <6>[ 9.052613] ACPI: EC: interrupt unblocked <6>[ 9.052795] ACPI: EC: event unblocked <6>[ 9.053795] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.054804] ACPI: EC: GPE=0x6e <6>[ 9.055803] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.056810] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.058196] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.059259] SCSI subsystem initialized <7>[ 9.059845] libata version 3.00 loaded. <6>[ 9.059933] ACPI: bus type USB registered <6>[ 9.060855] usbcore: registered new interface driver usbfs <6>[ 9.061831] usbcore: registered new interface driver hub <6>[ 9.062849] usbcore: registered new device driver usb <6>[ 9.064022] efivars: Registered efivars operations <6>[ 9.064913] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.066321] PCI: Using ACPI for IRQ routing <7>[ 9.085012] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.085160] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.085962] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.085972] e820: reserve RAM buffer [mem 0x67b9e000-0x67ffffff] <7>[ 9.085975] e820: reserve RAM buffer [mem 0x67fa7000-0x67ffffff] <7>[ 9.085978] e820: reserve RAM buffer [mem 0x6ca41000-0x6fffffff] <7>[ 9.085981] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.086074] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.086794] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.086794] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.086805] vgaarb: loaded <6>[ 9.087960] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.088805] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.091919] clocksource: Switched to clocksource tsc-early <6>[ 9.097993] pnp: PnP ACPI init <6>[ 9.101889] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.107805] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.114234] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.121394] system 00:03: [io 0x06a4] has been reserved <6>[ 9.126708] system 00:03: [io 0x06a0] has been reserved <6>[ 9.150708] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.157323] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.164276] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.171229] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.177836] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 9.184789] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 9.191742] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 9.198693] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 9.209860] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 9.216902] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 9.227075] pnp: PnP ACPI: found 8 devices <6>[ 9.241224] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 9.250279] NET: Registered PF_INET protocol family <6>[ 9.255420] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.265003] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 9.274006] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 9.281746] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 9.290038] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 9.300214] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 9.307117] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.314684] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 9.322686] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 9.328365] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 9.336784] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 9.345218] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 9.351302] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 9.357386] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 9.365059] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 9.372756] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 9.380432] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 9.388111] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 9.395790] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 9.403464] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 9.410265] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 9.415223] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 9.422003] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 9.427238] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 9.433342] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 9.440136] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.448224] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 9.453457] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 9.459559] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 9.466350] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.474438] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 9.480606] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 9.486775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 9.493633] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 9.500490] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 9.507780] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 9.514036] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 9.519595] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 9.525845] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 9.533396] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 9.538956] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 9.545208] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 9.553756] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 9.561011] PCI: CLS 0 bytes, default 64 <6>[ 9.564995] DMAR: No RMRR found <6>[ 9.568150] DMAR: No ATSR found <6>[ 9.571292] DMAR: IOMMU feature nest inconsistent <6>[ 9.571294] DMAR: IOMMU feature sc_support inconsistent <6>[ 9.575998] DMAR: dmar0: Using Queued invalidation <6>[ 9.586024] DMAR: dmar1: Using Queued invalidation <6>[ 9.591753] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 9.597134] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 9.602225] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 9.607309] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 9.612396] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 9.617506] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 9.622614] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 9.627699] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 9.632784] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 9.637878] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 9.642990] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 9.648153] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 9.653336] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 9.658533] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 9.663707] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 9.668934] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 9.674101] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 9.679263] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 9.684431] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 9.689623] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 9.694789] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 9.699982] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 9.705154] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 9.710383] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 9.715552] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 9.720725] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 9.725895] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 9.731062] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 9.736232] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 9.742203] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 9.748634] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 9.755057] software IO TLB: mapped [mem 0x00000000635c1000-0x00000000675c1000] (64MB) <6>[ 9.763274] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 9.771186] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 9.776917] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 9.782561] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 9.788210] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 9.795528] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 9.805554] clocksource: Switched to clocksource tsc <6>[ 9.810592] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 9.828721] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 9.837318] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 9.845018] NET: Registered PF_ALG protocol family <6>[ 9.849822] xor: measuring software checksum speed <6>[ 9.854835] prefetch64-sse : 45091 MB/sec <6>[ 9.859417] generic_sse : 43224 MB/sec <6>[ 9.863772] xor: using function: prefetch64-sse (45091 MB/sec) <6>[ 9.869638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 9.877025] io scheduler mq-deadline registered <6>[ 9.881553] io scheduler kyber registered <6>[ 9.886956] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 9.893783] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 9.899746] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.914626] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 9.920570] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 9.934618] efifb: probing for efifb <6>[ 9.938225] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 9.945086] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 9.951258] efifb: scrolling: redraw <6>[ 9.954833] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 9.964408] Console: switching to colour frame buffer device 360x112 <6>[ 9.974458] fb0: EFI VGA frame buffer device <6>[ 9.979397] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 9.984289] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 9.995784] ACPI: button: Lid Switch [LID0] <6>[ 10.000139] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.008579] ACPI: button: Sleep Button [SLPB] <6>[ 10.013060] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.021764] ACPI: button: Power Button [PWRB] <6>[ 10.092466] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.098146] ACPI: thermal: Thermal Zone [TZ00] (39 C) <6>[ 10.103741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.104496] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.115460] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.115828] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.124281] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.135765] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.142871] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.151776] Non-volatile memory driver v1.3 <6>[ 10.156087] Linux agpgart interface v0.103 <6>[ 10.192919] ACPI: bus type drm_connector registered <6>[ 10.207965] loop: module loaded <6>[ 10.211764] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 10.212332] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.218413] nvme nvme0: pci function 0000:01:00.0 <6>[ 10.223493] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 10.236698] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.246486] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 10.251724] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 10.259118] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.266360] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.274618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.277284] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 10.281810] usb usb1: Product: xHCI Host Controller <6>[ 10.281812] usb usb1: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 10.281813] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 10.282335] hub 1-0:1.0: USB hub found <6>[ 10.309046] hub 1-0:1.0: 1 port detected <6>[ 10.315229] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.323488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.330714] usb usb2: Product: xHCI Host Controller <6>[ 10.335592] usb usb2: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 10.343998] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 10.349049] hub 2-0:1.0: USB hub found <6>[ 10.352920] hub 2-0:1.0: 4 ports detected <6>[ 10.374121] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.379415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 10.388003] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 10.397738] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 10.403023] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 10.410467] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 10.417670] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 10.425973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.433240] usb usb3: Product: xHCI Host Controller <6>[ 10.438119] usb usb3: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 10.446423] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 10.451428] hub 3-0:1.0: USB hub found <6>[ 10.455295] hub 3-0:1.0: 12 ports detected <6>[ 10.480460] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 10.488810] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 10.496075] usb usb4: Product: xHCI Host Controller <6>[ 10.501145] usb usb4: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 10.501570] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 10.509620] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 10.520030] hub 4-0:1.0: USB hub found <6>[ 10.523817] hub 4-0:1.0: 2 ports detected <6>[ 10.531269] usbcore: registered new interface driver usb-storage <6>[ 10.537484] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 10.544277] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <6>[ 10.572014] nvme0n1: p1 p2 <6>[ 10.855822] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 10.875349] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 10.883533] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 10.890677] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 10.895386] usb 4-1: Manufacturer: Realtek <6>[ 10.899489] usb 4-1: SerialNumber: 000001 <3>[ 11.257032] i8042: Can't read CTR while initializing i8042 <4>[ 11.262566] i8042: probe of i8042 failed with error -5 <6>[ 11.268034] mousedev: PS/2 mouse device common for all mice <6>[ 11.274634] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 11.281546] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 11.286484] rtc_cmos rtc_cmos: setting system clock to 1998-01-27T09:39:42 UTC (885893982) <6>[ 11.294993] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 11.302875] IR JVC protocol handler initialized <6>[ 11.308138] IR MCE Keyboard/mouse protocol handler initialized <6>[ 11.314683] IR NEC protocol handler initialized <6>[ 11.319943] IR RC5(x/sz) protocol handler initialized <6>[ 11.325714] IR RC6 protocol handler initialized <6>[ 11.330964] IR SANYO protocol handler initialized <6>[ 11.336386] IR Sharp protocol handler initialized <6>[ 11.341806] IR Sony protocol handler initialized <6>[ 11.347137] IR XMP protocol handler initialized <6>[ 11.354134] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 11.363294] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 11.371502] device-mapper: uevent: version 1.0.3 <6>[ 11.377217] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 11.386387] intel_pstate: Intel P-state driver initializing <6>[ 11.405141] intel_pstate: HWP enabled <6>[ 11.410288] sdhci: Secure Digital Host Controller Interface driver <6>[ 11.417760] sdhci: Copyright(c) Pierre Ossman <6>[ 11.430623] pstore: Registered efi_pstore as persistent store backend <6>[ 11.438516] hid: raw HID events driver (C) Jiri Kosina <6>[ 11.445993] usbcore: registered new interface driver usbhid <6>[ 11.452764] usbhid: USB HID core driver <6>[ 11.458516] pci 0000:00:08.0: Setting to D3hot <6>[ 11.476329] pci 0000:00:05.0: Setting to D3hot <6>[ 11.495558] pci 0000:00:0b.0: Setting to D3hot <6>[ 11.515365] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 11.524783] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 11.536899] intel_pmc_core INT33A1:00: initialized <6>[ 11.546314] intel_rapl_msr: PL4 support detected. <6>[ 11.555042] intel_rapl_common: Found RAPL domain package <6>[ 11.566905] intel_rapl_common: Found RAPL domain core <6>[ 11.581299] intel_rapl_common: Found RAPL domain uncore <6>[ 11.594044] intel_rapl_common: Found RAPL domain psys <6>[ 11.615893] Initializing XFRM netlink socket <6>[ 11.623914] NET: Registered PF_INET6 protocol family <6>[ 11.639874] Segment Routing with IPv6 <6>[ 11.646763] In-situ OAM (IOAM) with IPv6 <6>[ 11.653887] mip6: Mobile IPv6 <6>[ 11.659798] NET: Registered PF_PACKET protocol family <6>[ 11.667798] NET: Registered PF_KEY protocol family <6>[ 11.723502] IPI shorthand broadcast: enabled <6>[ 11.732533] AVX2 version of gcm_enc/dec engaged. <6>[ 11.742219] AES CTR mode by8 optimization enabled <6>[ 11.834609] sched_clock: Marking stable (10209017351, 1624688761)->(13058713267, -1225007155) <6>[ 11.849871] registered taskstats version 1 <6>[ 11.964834] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 11.999053] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.008686] pstore: Using crash dump compression: deflate <6>[ 12.036309] clk: Disabling unused clocks <6>[ 12.045196] ALSA device list: <6>[ 12.052981] No soundcards found. <6>[ 12.063609] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 12.755775] EXT4-fs (nvme0n1p2): mounted filesystem aecbb3a8-9ab2-45bd-8603-892d1189995e ro with ordered data mode. Quota mode: disabled. <6>[ 12.773409] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 12.792054] devtmpfs: mounted <6>[ 12.803023] Freeing unused kernel image (initmem) memory: 2564K <6>[ 12.813841] Write protecting the kernel read-only data: 22528k <6>[ 12.826216] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 12.837332] Run /sbin/init as init process <7>[ 12.846173] with arguments: <7>[ 12.846193] /sbin/init <7>[ 12.846209] 3 <7>[ 12.846219] with environment: <7>[ 12.846228] HOME=/ <7>[ 12.846237] TERM=linux <7>[ 12.846246] BOOT_IMAGE=/boot/drm_intel <7>[ 13.280416] systemd[1]: System time before build time, advancing clock. <7>[ 13.625118] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 13.657654] systemd[1]: Detected architecture x86-64. <7>[ 13.702131] systemd[1]: Set hostname to . <6>[ 13.926636] cat (190) used greatest stack depth: 12776 bytes left <6>[ 13.944848] mkdir (193) used greatest stack depth: 12168 bytes left <7>[ 14.912563] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 14.930537] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 14.956014] systemd[1]: Created slice system-modprobe.slice. <7>[ 14.981050] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.006156] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.030876] systemd[1]: Created slice User and Session Slice. <7>[ 15.052505] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.076355] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.093393] systemd[1]: Reached target Remote File Systems. <7>[ 15.113104] systemd[1]: Reached target Slices. <7>[ 15.131814] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.159564] systemd[1]: Listening on Syslog Socket. <7>[ 15.178801] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.202094] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 15.263565] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 15.278519] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 15.301272] systemd[1]: Listening on Journal Socket. <7>[ 15.321139] systemd[1]: Listening on udev Control Socket. <7>[ 15.342284] systemd[1]: Listening on udev Kernel Socket. <7>[ 15.394251] systemd[1]: Mounting Huge Pages File System... <7>[ 15.450019] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 15.503643] systemd[1]: Mounting Kernel Debug File System... <7>[ 15.556788] systemd[1]: Mounting Kernel Trace File System... <7>[ 15.617386] systemd[1]: Starting Journal Service... <7>[ 15.664801] systemd[1]: Starting Set the console keyboard layout... <7>[ 15.712017] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 15.736377] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 15.750960] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 15.794828] systemd[1]: Starting File System Check on Root Device... <7>[ 15.845057] systemd[1]: Starting Load Kernel Modules... <7>[ 15.888864] systemd[1]: Starting udev Coldplug all Devices... <7>[ 15.917255] systemd[1]: Starting Uncomplicated firewall... <7>[ 15.938981] systemd[1]: Started Journal Service. <6>[ 16.986418] EXT4-fs (nvme0n1p2): re-mounted aecbb3a8-9ab2-45bd-8603-892d1189995e r/w. Quota mode: disabled. <6>[ 17.097024] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 17.171956] systemd-journald[214]: Received client request to flush runtime journal. <5>[ 17.182868] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 18.615807] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 18.647728] pps_core: LinuxPPS API ver. 1 registered <6>[ 18.647741] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 18.675494] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 18.675756] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 19.164082] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 19.164111] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 19.187829] PTP clock support registered <6>[ 19.216192] usbcore: registered new device driver r8152-cfgselector <6>[ 19.232181] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 19.232194] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 19.238195] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 19.253800] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 19.254168] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 19.351844] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 19.371310] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 19.440965] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 19.443209] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 19.474065] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 19.474435] usbcore: registered new interface driver r8152 <6>[ 19.486081] usbcore: registered new interface driver cdc_ether <6>[ 19.490310] usbcore: registered new interface driver r8153_ecm <6>[ 19.513300] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 19.513554] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 19.513749] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 19.544146] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 19.723652] r8152 4-1:1.0 enxe2015072f1a3: renamed from eth0 <6>[ 19.773026] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 19.879537] ********************************************************** <4>[ 19.879543] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.879548] ** ** <4>[ 19.879553] ** trace_printk() being used. Allocating extra memory. ** <4>[ 19.879557] ** ** <4>[ 19.879562] ** This means that this is a DEBUG kernel and it is ** <4>[ 19.879567] ** unsafe for production use. ** <4>[ 19.879571] ** ** <4>[ 19.879576] ** If you see this message and you are not debugging ** <4>[ 19.879581] ** the kernel, report this immediately to your vendor! ** <4>[ 19.879585] ** ** <4>[ 19.879590] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 19.879594] ********************************************************** <6>[ 20.067872] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 20.071372] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.072178] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 20.072848] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 20.072906] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 20.073463] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 20.074067] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 20.074647] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.075243] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 20.076200] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 20.076815] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 20.078201] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 20.078685] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 20.080505] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 20.080991] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 20.081338] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 20.082800] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 20.083280] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 20.083644] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 20.084004] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 20.087976] Console: switching to colour dummy device 80x25 <6>[ 20.098387] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 20.099160] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 20.099199] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 20.099847] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 20.100443] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 20.100936] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 20.102433] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0c018 <7>[ 20.103150] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 20.103674] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 20.104165] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 20.104613] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 20.105060] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 20.105545] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 20.105997] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 20.106394] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 20.106777] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 20.107367] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 20.107932] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 20.108454] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 20.108971] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.109471] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.109970] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 20.110458] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.110962] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.111450] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 20.111947] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.112425] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.112913] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 20.113407] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.113907] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.114381] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 20.114867] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.115331] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.115798] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 20.116253] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.116760] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.119163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 20.119788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 20.120310] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 20.120827] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 20.121308] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 20.121797] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 20.122281] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 20.122786] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 20.123253] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 20.123785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 20.124270] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 20.124764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 20.125238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 20.125730] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 20.126204] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 20.126671] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 20.127160] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 20.127626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 20.128107] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 20.128587] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 20.129077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.129550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 20.130025] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.130488] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 20.130971] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 20.131475] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.131996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 20.132482] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.132978] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <6>[ 20.133345] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 20.133463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.134011] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 20.134497] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 20.134993] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 20.135463] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.135942] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 20.136398] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 20.136896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 20.137410] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 20.138042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.138862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 20.139568] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.140463] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 20.141191] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 20.141906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 20.142453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 20.142967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 20.143521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 20.144063] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 20.144159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 20.144759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 20.145290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 20.145792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 20.146446] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <6>[ 20.161408] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 20.163922] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 20.166148] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 20.166826] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 20.167356] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 20.167858] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 20.168339] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 20.168813] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 20.169257] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 20.225859] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 20.233599] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 20.236853] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 20.237531] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 20.238223] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 20.238826] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 20.239568] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 20.240222] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 20.240766] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 20.241288] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 20.241808] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 20.242298] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 20.242794] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 20.243276] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 20.243761] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 20.244390] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 20.245081] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.245556] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.246020] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.246445] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.246878] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.247422] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.248680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 20.251111] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 20.251869] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 20.254960] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 20.255835] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 20.256668] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 20.258018] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 20.260041] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 20.263139] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 20.263656] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 20.294091] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 20.294214] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 20.294227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 20.294394] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.297341] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 20.299310] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 20.300101] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 20.300754] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 20.301384] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 20.302184] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 20.302732] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 20.303203] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 20.303630] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 20.304195] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 20.305461] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 20.306036] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.307679] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 20.308173] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 20.316645] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 20.320790] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.327595] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 20.328873] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 20.329611] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 20.330602] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 20.331220] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 20.331749] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 20.332474] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 20.333128] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.334321] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 20.339669] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 20.340521] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 20.341346] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 20.344676] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 20.345639] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 20.346462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 20.347231] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 20.347769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 20.348264] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 20.348750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 20.349229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 20.349679] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 20.350169] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 20.350637] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 20.351136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 20.351607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 20.352110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 20.352612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 20.353105] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 20.353569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 20.354051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 20.354504] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 20.354986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 20.355452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 20.355939] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 20.356400] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 20.356872] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 20.357317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 20.357785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 20.358235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 20.358671] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 20.359880] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 20.360425] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 20.360942] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 20.361401] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 20.361876] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 20.362318] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 20.362767] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 20.363196] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 20.363609] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 20.364083] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 20.364547] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 20.365122] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 20.365651] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 20.366134] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.366584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.367041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.367482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.368023] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 20.368529] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 20.369021] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.369474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.369949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.370391] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.370982] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 20.371483] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 20.372031] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 20.372522] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 20.373039] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.373512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.373992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.374471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.375017] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 20.375532] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 20.376013] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 20.376461] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 20.376964] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 20.377451] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 20.378416] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 20.379339] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 20.380241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 20.380910] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 20.381421] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 20.381917] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 20.382432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 20.383649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 20.384197] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 20.384664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 20.385136] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 20.385632] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 20.386155] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 20.386662] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 20.387265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 20.387782] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 20.388265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 20.388784] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 20.389274] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 20.389733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 20.390177] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 20.390733] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 20.391219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 20.391724] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 20.392195] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 20.392640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 20.393099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 20.393557] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 20.394114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 20.394625] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 20.395121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 20.395582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 20.396059] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 20.396523] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 20.396997] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 20.398275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 20.398906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.399432] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 20.399946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.400437] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.400944] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.401427] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.401925] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 20.402411] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.402925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.403417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 20.403920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.404399] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.404895] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.405371] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.405868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.406349] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.406904] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.407403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.407901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.408378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.408876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.409357] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 20.409926] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 20.410455] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.410983] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.411470] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.412416] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.413010] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.413500] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.414015] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.414509] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.415009] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.415485] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.415974] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.416443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 20.416940] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 20.417425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 20.418245] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 20.418799] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.419286] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.419774] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 20.421235] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 20.421841] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 20.439150] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 20.463729] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 20.464268] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 20.464634] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 20.465153] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 20.465159] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 20.465162] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 20.465194] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 20.467412] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 20.467876] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 20.468257] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 20.470462] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 20.470980] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 20.472264] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 20.472632] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 20.475874] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.476477] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 20.476973] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 20.518078] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 20.558926] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 20.559913] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 20.560627] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 20.561400] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 20.562270] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 20.563079] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 20.563831] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 20.564553] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 20.565331] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 20.566077] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 20.566729] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 20.567350] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 20.568109] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 20.568843] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 20.572362] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 20.585784] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.588835] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 20.592989] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 20.593011] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 20.594403] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 20.619652] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 20.619749] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 20.621523] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 20.622295] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 20.623929] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 20.624478] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 20.626177] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 20.626799] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 20.631326] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 20.632205] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 20.633179] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 20.715683] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 20.716145] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 20.716459] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 20.716760] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 20.717046] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 20.717309] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 20.717574] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 20.717959] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 20.718265] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 20.718539] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 20.718843] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 20.719135] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 20.719407] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 20.719688] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 20.720003] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 20.721921] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 20.721938] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 20.741032] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 16ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 20.742871] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 20.751813] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 20.753497] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 20.753523] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 20.754068] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 20.764110] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.765995] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.767621] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 20.769189] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 20.770523] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 20.771788] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 20.772915] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 20.774096] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 20.775254] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 20.776672] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 20.777982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 20.779412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 20.780593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 20.782659] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 20.784050] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 20.785143] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 20.786412] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 20.787387] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 20.788516] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.789683] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.790856] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.791961] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.793091] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.794208] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.795394] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.796383] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.797238] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.798093] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.798953] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.799935] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.800737] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.801538] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.803098] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.804277] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.805421] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.806654] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.807875] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.809044] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.810336] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 20.811664] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.812907] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 20.814054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 20.815461] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 20.815483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 20.816646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 20.817773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 20.818802] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 20.819906] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 20.821014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 20.821990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 20.823208] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 20.824427] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 20.825679] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 20.826989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 20.827992] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 20.828013] i915 0000:00:02.0: pixelformat: RGB <7>[ 20.828028] i915 0000:00:02.0: colorimetry: sRGB <7>[ 20.828042] i915 0000:00:02.0: bpc: 0 <7>[ 20.828055] i915 0000:00:02.0: dynamic range: VESA range <7>[ 20.828070] i915 0000:00:02.0: content type: Not defined <7>[ 20.828084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 20.829064] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.830179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 20.831166] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.832111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 20.833157] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 20.834443] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 20.835688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 20.836824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 20.837678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 20.838946] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 20.840093] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <6>[ 20.842058] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 20.841453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 20.842779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 20.843987] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.845108] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.846229] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.847299] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.848393] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.849348] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 20.850367] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.851550] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.852803] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 20.853941] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 20.855147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 20.856342] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 20.857525] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 20.858793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 20.859996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 20.861186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 20.866672] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 21.069995] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 21.072619] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 21.082107] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 21.082740] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 21.083245] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 21.135372] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.136849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 21.139158] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 21.140349] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 21.141294] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 21.142034] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 21.142227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 21.142415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 21.142600] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 21.142791] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.142972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 21.143149] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 21.143324] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 21.143500] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 21.143675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.143861] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.144037] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 21.144212] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 21.144387] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 21.144561] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 21.144745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.144921] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 21.145095] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 21.145270] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 21.145445] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 21.145658] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.146039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.147837] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 21.148968] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 21.149905] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 21.742926] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 21.743766] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.744605] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 21.746235] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 21.946410] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.950415] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.951942] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 21.956609] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.957327] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 21.958683] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 21.960247] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 21.960994] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 21.962792] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 21.963095] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 21.965572] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 21.965938] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 21.966922] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 21.967560] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 21.967929] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 21.968319] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 21.978804] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.981087] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 21.982634] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 21.986669] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 21.987974] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 21.989169] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 21.990297] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.991448] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.992459] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 21.993391] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.995623] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.997030] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 21.997955] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 21.998775] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.999558] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 22.001873] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 22.005823] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 22.007289] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 22.008594] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 22.009636] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 22.010390] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 22.011215] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 22.014613] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 22.015614] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 22.016869] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 22.017667] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 22.018511] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 22.019432] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 22.054433] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 22.056073] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 22.060610] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 22.062814] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 22.065935] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <6>[ 22.066770] r8152 4-1:1.0 enxe2015072f1a3: carrier on <7>[ 22.067641] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 22.069376] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 22.072904] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 22.075152] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 22.077022] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 22.080442] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 22.082183] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 22.084844] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 22.085029] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 22.098215] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 22.189360] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 22.212324] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 22.223066] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 22.224179] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 22.225208] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 22.227746] [drm:drm_client_modeset_probe] <7>[ 22.227551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 22.229173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.229091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 22.229392] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.230158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 22.231228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.234126] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 22.234863] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 22.234879] i915 device info: graphics version: 12.71 <7>[ 22.234888] i915 device info: media version: 13 <7>[ 22.234894] i915 device info: display version: 14 <7>[ 22.234902] i915 device info: graphics stepping: B0 <7>[ 22.234909] i915 device info: media stepping: C0 <7>[ 22.234915] i915 device info: display stepping: C0 <7>[ 22.234921] i915 device info: base die stepping: ** <7>[ 22.234928] i915 device info: gt: 0 <7>[ 22.234934] i915 device info: memory-regions: 0x41 <7>[ 22.234941] i915 device info: page-sizes: 0x211000 <7>[ 22.234948] i915 device info: platform: METEORLAKE <7>[ 22.234955] i915 device info: ppgtt-size: 48 <7>[ 22.234961] i915 device info: ppgtt-type: 2 <7>[ 22.234967] i915 device info: dma_mask_size: 46 <7>[ 22.234974] i915 device info: is_mobile: no <7>[ 22.234981] i915 device info: is_lp: no <7>[ 22.234987] i915 device info: require_force_probe: yes <7>[ 22.234994] i915 device info: is_dgfx: no <7>[ 22.235001] i915 device info: has_64bit_reloc: yes <7>[ 22.235007] i915 device info: has_64k_pages: no <7>[ 22.235013] i915 device info: gpu_reset_clobbers_display: no <7>[ 22.235020] i915 device info: has_reset_engine: yes <7>[ 22.235027] i915 device info: has_3d_pipeline: yes <7>[ 22.235033] i915 device info: has_4tile: yes <7>[ 22.235040] i915 device info: has_flat_ccs: no <7>[ 22.235046] i915 device info: has_global_mocs: yes <7>[ 22.235052] i915 device info: has_gmd_id: yes <7>[ 22.235059] i915 device info: has_gt_uc: yes <7>[ 22.235065] i915 device info: has_heci_pxp: no <7>[ 22.235071] i915 device info: has_heci_gscfi: no <7>[ 22.235078] i915 device info: has_guc_deprivilege: yes <7>[ 22.235084] i915 device info: has_l3_ccs_read: no <7>[ 22.235090] i915 device info: has_l3_dpf: no <7>[ 22.235097] i915 device info: has_llc: no <7>[ 22.235103] i915 device info: has_logical_ring_contexts: yes <7>[ 22.235110] i915 device info: has_logical_ring_elsq: yes <7>[ 22.235116] i915 device info: has_media_ratio_mode: no <7>[ 22.235123] i915 device info: has_mslice_steering: no <7>[ 22.235129] i915 device info: has_oa_bpc_reporting: yes <7>[ 22.235135] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 22.235142] i915 device info: has_oam: yes <7>[ 22.235148] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 22.235154] i915 device info: has_pxp: yes <7>[ 22.235161] i915 device info: has_rc6: yes <7>[ 22.235167] i915 device info: has_rc6p: no <7>[ 22.235173] i915 device info: has_rps: yes <7>[ 22.235180] i915 device info: has_runtime_pm: yes <7>[ 22.235186] i915 device info: has_snoop: yes <7>[ 22.235192] i915 device info: has_coherent_ggtt: no <7>[ 22.235199] i915 device info: tuning_thread_rr_after_dep: no <7>[ 22.235205] i915 device info: unfenced_needs_alignment: no <7>[ 22.235212] i915 device info: hws_needs_physical: no <7>[ 22.235218] i915 device info: has_pooled_eu: no <7>[ 22.235224] i915 device info: cursor_needs_physical: no <7>[ 22.235231] i915 device info: has_cdclk_crawl: yes <7>[ 22.235237] i915 device info: has_cdclk_squash: yes <7>[ 22.234875] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.235245] i915 device info: has_ddi: yes <7>[ 22.235249] i915 device info: has_dp_mst: yes <7>[ 22.235254] i915 device info: has_dsb: yes <7>[ 22.235260] i915 device info: has_fpga_dbg: yes <7>[ 22.235264] i915 device info: has_gmch: no <7>[ 22.235267] i915 device info: has_hotplug: yes <7>[ 22.235270] i915 device info: has_hti: no <7>[ 22.235274] i915 device info: has_ipc: yes <7>[ 22.235277] i915 device info: has_overlay: no <7>[ 22.235280] i915 device info: has_psr: yes <7>[ 22.235284] i915 device info: has_psr_hw_tracking: no <7>[ 22.235287] i915 device info: overlay_needs_physical: no <7>[ 22.235291] i915 device info: supports_tv: no <7>[ 22.235294] i915 device info: has_hdcp: yes <7>[ 22.235297] i915 device info: has_dmc: yes <7>[ 22.235300] i915 device info: has_dsc: yes <7>[ 22.235304] i915 device info: rawclk rate: 38400 kHz <7>[ 22.235308] i915 device info: iommu: enabled <7>[ 22.235313] i915 device info: available engines: 400003 <7>[ 22.235318] i915 device info: subslice total: 8 <7>[ 22.235322] i915 device info: geometry dss mask=00000000,000000ff <7>[ 22.235328] i915 device info: compute dss mask=00000000,000000ff <7>[ 22.235332] i915 device info: EU total: 128 <7>[ 22.235335] i915 device info: EU per subslice: 16 <7>[ 22.235339] i915 device info: has slice power gating: no <7>[ 22.235342] i915 device info: has subslice power gating: no <7>[ 22.235346] i915 device info: has EU power gating: no <7>[ 22.235349] i915 device info: available engines: 41400 <7>[ 22.235353] i915 device info: subslice total: 8 <7>[ 22.235356] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 22.235361] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 22.235365] i915 device info: EU total: 128 <7>[ 22.235368] i915 device info: EU per subslice: 16 <7>[ 22.235371] i915 device info: has slice power gating: no <7>[ 22.235375] i915 device info: has subslice power gating: no <7>[ 22.235378] i915 device info: has EU power gating: no <6>[ 22.235382] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 22.235386] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 22.235389] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 22.235559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.237154] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.237747] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.238241] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.238624] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.239447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.239476] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.239492] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.239595] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.240324] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.242450] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.242938] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.244291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 22.244965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.245050] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.245068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.245106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.246025] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 22.246106] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.246160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.246211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.247068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 22.247153] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.247216] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.247279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.248760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 22.248894] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.248985] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.249079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.251355] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 22.251458] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.251534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.251609] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.253007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 22.253127] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.253215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.253306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.254666] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 22.254816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.254904] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.254934] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.254952] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.254970] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.254987] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.255004] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.255021] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.255488] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.255572] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.255590] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.255605] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.255619] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 22.255676] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.256025] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 22.256326] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 22.276064] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 22.280487] fbcon: i915drmfb (fb0) is primary device <7>[ 22.285727] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.287002] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.288068] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.289051] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.290036] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.290969] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.292063] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.293272] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.294279] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.295265] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.296203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 22.297145] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 22.298050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 22.299159] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 22.300179] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.301169] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.302073] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 22.302980] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 22.304057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 22.305014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.305874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.306820] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.307750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.308627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.309591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.310565] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.311551] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.312531] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.313392] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.314331] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.314349] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.314363] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.314375] i915 0000:00:02.0: bpc: 0 <7>[ 22.314384] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.314393] i915 0000:00:02.0: content type: Not defined <7>[ 22.314402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.315325] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.316238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.317150] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.318087] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.318969] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.319753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.320484] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.321348] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.322249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.323275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.324488] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 22.325913] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 22.326865] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 22.327861] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.329005] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.329979] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.331017] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.332143] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.333030] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 22.333910] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.334775] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.335605] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 22.336791] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 22.337897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 22.339048] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 22.340191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 22.341343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 22.342470] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 22.343655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 22.344841] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 22.345962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 22.350446] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 22.352981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.354247] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.355426] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.356648] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.357857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.358984] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.360112] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.361216] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.362319] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.363393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.364486] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.365575] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.366742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.367799] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.368842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.369870] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.370930] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.371818] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.372606] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.373454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.374501] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.375351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.379477] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 22.385040] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.385546] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.387594] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.388783] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.389989] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.391013] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.392056] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.393294] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.394780] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.396105] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.397388] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.398606] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.399947] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 22.428506] Console: switching to colour frame buffer device 360x112 <6>[ 22.468176] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 22.486281] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.486425] [drm:drm_client_modeset_probe] <7>[ 22.488068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.488173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.491068] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.491907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 22.492683] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 22.494088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.495304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.495615] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.496034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.496309] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.496822] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.496837] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.496843] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.496893] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.497176] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.500403] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.501086] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.502476] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.502530] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.502545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.502584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.503328] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.503363] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.503392] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.503834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.503876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.503912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.504495] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.504526] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.504554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.505015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.505044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.505071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.505589] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.505629] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.505667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.506355] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.506389] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.506397] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.506402] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.506406] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.506409] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.506413] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.506417] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.506616] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.506651] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.506656] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.506661] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.506664] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.506747] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.535234] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 22.535443] [drm:drm_client_modeset_probe] <7>[ 22.535591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.535655] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.539017] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.539602] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.541261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.541613] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.541966] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.542261] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.542597] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.542608] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.542614] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.542648] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.543008] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.544828] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.545345] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.547019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.547081] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.547101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.547156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.547684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.547759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.547802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.548368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.548425] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.548478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.549225] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.549282] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.549335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.550339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.550414] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.550485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.551475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.551557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.551631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.552635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.552725] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.552739] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.552748] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.552757] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.552766] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.552775] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.552783] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.552926] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.552970] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.552980] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.552991] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.553000] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 22.553065] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.580188] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.581286] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.582976] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.584375] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 22.585391] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.586338] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.587110] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.587778] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 22.588422] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.589179] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.590087] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.590852] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 22.591578] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.592180] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.592810] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.593580] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 22.594255] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.595026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.595780] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.596495] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 22.597148] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.597793] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.598498] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.599153] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 22.599870] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.600590] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.601299] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.602068] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 22.602764] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.603421] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.604164] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.604796] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 22.605334] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.605959] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.606630] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 22.607421] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 22.622503] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 22.626212] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 22.627567] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 22.628791] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 22.681971] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 22.682672] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 25.584134] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 25.585389] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 25.804176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 25.805798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.807008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.808176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 26.859486] systemd-udevd (252) used greatest stack depth: 11832 bytes left <6>[ 26.863150] systemd-udevd (298) used greatest stack depth: 11240 bytes left <6>[ 26.867481] systemd-udevd (294) used greatest stack depth: 11216 bytes left <7>[ 28.415654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 28.418037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 28.431896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 28.433230] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 28.434454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.183858] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=674 'systemd' <5>[ 34.640240] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.714787] systemd-journald[214]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 35.535669] fuse: init (API version 7.38)