<5>[ 0.000000] Linux version 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 30 20:54:56 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca40fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca41000-0x000000006fdb8fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb9000-0x000000006fedffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe15000 SMBIOS=0x6cb18000 MEMATTR=0x67f9d018 ESRT=0x67fa9798 TPMEventLog=0x67f6d018 <6>[ 0.000000] efi: Remove mem283: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem285: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000394] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000397] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000399] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000400] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000403] esrt: Reserving ESRT space from 0x0000000067fa9798 to 0x0000000067fa9910. <7>[ 0.000408] e820: update [mem 0x67fa9000-0x67fa9fff] usable ==> reserved <6>[ 0.000426] Using GB pages for direct mapping <6>[ 0.001181] printk: log_buf_len: 1048576 bytes <6>[ 0.001183] printk: early log buf free: 259112(98%) <6>[ 0.001184] Secure boot disabled <6>[ 0.001186] ACPI: Early table checksum verification disabled <6>[ 0.001188] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001192] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001197] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001201] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001203] ACPI: FACS 0x000000006FDFA000 000040 <6>[ 0.001205] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001210] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001215] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001217] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001221] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001224] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001226] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001228] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001230] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001233] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001235] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001237] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001239] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001241] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001244] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001246] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001248] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001250] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001252] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001255] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001257] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001261] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001264] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001266] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001268] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001270] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001272] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001275] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001277] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001279] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001281] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001284] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001286] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001288] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001290] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001292] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001295] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001297] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001298] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001298] ACPI: Reserving FACS table memory at [mem 0x6fdfa000-0x6fdfa03f] <6>[ 0.001299] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001304] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001305] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001307] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001308] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001309] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001309] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001310] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001311] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001311] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001312] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001313] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001313] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001314] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001314] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001315] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001316] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001316] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001317] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001318] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001318] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001319] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001320] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001320] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001321] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001323] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001323] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001324] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001325] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001337] Setting APIC routing to cluster x2apic. <6>[ 0.045907] Zone ranges: <6>[ 0.045909] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045911] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045913] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045914] Movable zone start for each node <6>[ 0.045915] Early memory node ranges <6>[ 0.045915] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045917] node 0: [mem 0x0000000000100000-0x000000006ca40fff] <6>[ 0.045918] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045918] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045920] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045924] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045948] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048399] On node 0, zone DMA32: 13758 pages in unavailable ranges <6>[ 0.090910] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.091694] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.091699] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.091745] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.091747] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.091749] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.091752] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.091753] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.091762] e820: update [mem 0x67f4e000-0x67f68fff] usable ==> reserved <6>[ 0.091769] TSC deadline timer available <6>[ 0.091770] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.091780] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.091782] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.091783] PM: hibernation: Registered nosave memory: [mem 0x67f4e000-0x67f68fff] <6>[ 0.091784] PM: hibernation: Registered nosave memory: [mem 0x67fa9000-0x67fa9fff] <6>[ 0.091785] PM: hibernation: Registered nosave memory: [mem 0x6ca41000-0x6fdb8fff] <6>[ 0.091785] PM: hibernation: Registered nosave memory: [mem 0x6fdb9000-0x6fedffff] <6>[ 0.091786] PM: hibernation: Registered nosave memory: [mem 0x6fee0000-0x6fffefff] <6>[ 0.091787] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.091787] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.091788] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.091789] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.091791] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.091795] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.095048] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.096541] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.096545] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.096547] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.096553] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.096558] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.096571] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.096629] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.096660] random: crng init done <6>[ 0.099476] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.100860] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.100965] Built 1 zonelists, mobility grouping on. Total pages: 8177208 <6>[ 0.100968] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.100969] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.101706] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.101720] software IO TLB: area num 32. <6>[ 0.787901] Memory: 32435304K/33228672K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793112K reserved, 0K cma-reserved) <4>[ 0.787904] ********************************************************** <4>[ 0.787905] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.787905] ** ** <4>[ 0.787906] ** This system shows unhashed kernel memory addresses ** <4>[ 0.787906] ** via the console, logs, and other interfaces. This ** <4>[ 0.787907] ** might reduce the security of your system. ** <4>[ 0.787907] ** ** <4>[ 0.787908] ** If you see this message and you are not debugging ** <4>[ 0.787908] ** the kernel, report this immediately to your system ** <4>[ 0.787908] ** administrator! ** <4>[ 0.787909] ** ** <4>[ 0.787909] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.787910] ********************************************************** <6>[ 0.788088] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.788570] Dynamic Preempt: full <6>[ 0.788803] Running RCU self tests <6>[ 0.788803] Running RCU synchronous self tests <6>[ 0.788847] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.788848] rcu: RCU lockdep checking is enabled. <6>[ 0.788849] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.788850] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.788851] Trampoline variant of Tasks RCU enabled. <6>[ 0.788852] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.788852] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.788920] Running RCU synchronous self tests <6>[ 0.792936] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.793303] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.793640] Console: colour dummy device 80x25 <6>[ 0.793654] printk: console [tty0] enabled <4>[ 0.795613] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.795626] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.795633] ... MAX_LOCK_DEPTH: 48 <4>[ 0.795639] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.795646] ... CLASSHASH_SIZE: 4096 <4>[ 0.795652] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.795659] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 0.795666] ... CHAINHASH_SIZE: 65536 <4>[ 0.795673] memory used by lock dependency info: 9461 kB <4>[ 0.795681] memory used for stack traces: 8320 kB <4>[ 0.795688] per task-struct memory footprint: 1920 bytes <6>[ 0.795706] ACPI: Core revision 20230331 <6>[ 0.796702] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 0.796877] APIC: Switch to symmetric I/O mode setup <6>[ 0.796887] DMAR: Host address width 42 <6>[ 0.796893] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.796927] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.796940] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.796960] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 0.796972] DMAR: SATC flags: 0x1 <6>[ 0.796983] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.796992] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.797000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.798755] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.803413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.807792] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.807818] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.807883] x86/tme: not enabled by BIOS <6>[ 0.807895] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.807903] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.808099] process: using mwait in idle threads <6>[ 0.808111] CET detected: Indirect Branch Tracking enabled <6>[ 0.808119] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.808127] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.808138] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.808151] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.808159] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 0.808171] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.808183] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.808204] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.808216] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.808224] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.808233] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.808244] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.808253] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.808261] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 0.819862] Freeing SMP alternatives memory: 36K <6>[ 0.819875] pid_max: default: 32768 minimum: 301 <6>[ 0.827867] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.827932] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.828515] Running RCU synchronous self tests <6>[ 0.828525] Running RCU synchronous self tests <6>[ 0.828706] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.828809] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.828809] Running RCU-tasks wait API self tests <6>[ 0.935834] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.936112] core: cpu_core PMU driver: <6>[ 0.936126] ... version: 5 <6>[ 0.936134] ... bit width: 48 <6>[ 0.936141] ... generic registers: 8 <6>[ 0.936148] ... value mask: 0000ffffffffffff <6>[ 0.936157] ... max period: 00007fffffffffff <6>[ 0.936165] ... fixed-purpose events: 4 <6>[ 0.936172] ... event mask: 0000000f000000ff <6>[ 0.936239] signal: max sigframe size: 3632 <6>[ 0.936263] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.937843] rcu: Hierarchical SRCU implementation. <6>[ 0.937851] rcu: Max phase no-delay instances is 400. <6>[ 0.939913] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.940510] smp: Bringing up secondary CPUs ... <6>[ 0.940816] smpboot: x86: Booting SMP configuration: <6>[ 0.940830] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.007367] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 0.007367] ... version: 5 <6>[ 0.007367] ... bit width: 48 <6>[ 0.007367] ... generic registers: 8 <6>[ 0.007367] ... value mask: 0000ffffffffffff <6>[ 0.007367] ... max period: 00007fffffffffff <6>[ 0.007367] ... fixed-purpose events: 3 <6>[ 0.007367] ... event mask: 00000007000000ff <4>[ 0.952114] #1 #3 #5 #7 #9 #11 <6>[ 0.957839] smp: Brought up 1 node, 22 CPUs <6>[ 0.957860] smpboot: Max logical packages: 1 <6>[ 0.957867] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.962988] devtmpfs: initialized <6>[ 0.964215] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb9000-0x6fedffff] (1208320 bytes) <6>[ 0.964277] Running RCU synchronous self tests <6>[ 0.964299] Running RCU synchronous self tests <6>[ 0.964871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.964890] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 0.965172] pinctrl core: initialized pinctrl subsystem <6>[ 0.965620] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.966849] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.966851] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.966861] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.966926] cpuidle: using governor menu <6>[ 0.966890] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.967154] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 0.967185] PCI: not using MMCONFIG <6>[ 0.967193] PCI: Using configuration type 1 for base access <4>[ 0.968814] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 0.969890] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.970086] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.970105] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.971044] cryptd: max_cpu_qlen set to 1000 <6>[ 0.987887] raid6: avx2x4 gen() 53128 MB/s <6>[ 1.004915] raid6: avx2x2 gen() 53100 MB/s <6>[ 1.021943] raid6: avx2x1 gen() 52272 MB/s <6>[ 1.021950] raid6: using algorithm avx2x4 gen() 53128 MB/s <6>[ 1.038974] raid6: .... xor() 9457 MB/s, rmw enabled <6>[ 1.038982] raid6: using avx2x2 recovery algorithm <6>[ 1.039283] ACPI: Added _OSI(Module Device) <6>[ 1.039291] ACPI: Added _OSI(Processor Device) <6>[ 1.039297] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 1.039304] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 1.047864] Callback from call_rcu_tasks() invoked. <6>[ 1.438274] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 1.449530] ACPI: EC: EC started <6>[ 1.449543] ACPI: EC: interrupt blocked <6>[ 1.453831] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 1.453841] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.725234] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 3.327907] ACPI: Interpreter enabled <6>[ 3.328038] ACPI: PM: (supports S0 S4 S5) <6>[ 3.328049] ACPI: Using IOAPIC for interrupt routing <6>[ 3.328206] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 3.360099] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 3.360130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.360144] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.386271] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 3.386306] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.432439] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.558794] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.565336] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 3.582835] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 3.590006] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 3.603298] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 3.609059] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 3.615544] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 3.622118] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 3.686534] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.686844] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.687145] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 3.983830] ACPI: \_TZ_.FN00: New power resource <6>[ 3.984395] ACPI: \_TZ_.FN01: New power resource <6>[ 3.984966] ACPI: \_TZ_.FN02: New power resource <6>[ 3.985520] ACPI: \_TZ_.FN03: New power resource <6>[ 3.986076] ACPI: \_TZ_.FN04: New power resource <6>[ 3.989991] ACPI: \PIN_: New power resource <6>[ 3.992533] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 3.992555] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 3.996000] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 4.002646] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 4.011233] PCI host bridge to bus 0000:00 <6>[ 4.011244] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 4.011257] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 4.011269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 4.011282] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 4.011295] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 4.011309] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 4.020462] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 4.021004] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 4.021027] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 4.021048] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 4.021101] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 4.021113] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 4.021170] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 4.022293] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 4.022319] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 4.023468] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 4.023488] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 4.023518] pci 0000:00:05.0: enabling Extended Tags <6>[ 4.024517] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 4.024796] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 4.029122] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 4.029354] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 4.033085] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 4.033301] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 4.037017] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 4.037044] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 4.037460] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 4.037478] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 4.037507] pci 0000:00:0a.0: enabling Extended Tags <6>[ 4.037713] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 4.037733] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 4.037757] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 4.038177] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 4.038203] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 4.038289] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 4.039817] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 4.039843] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 4.039864] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 4.039940] pci 0000:00:0d.3: supports D1 D2 <6>[ 4.039947] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.041118] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 4.041142] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 4.041215] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.043559] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 4.043586] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 4.043674] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.045472] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 4.045500] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 4.045522] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 4.045848] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 4.045907] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.047252] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 4.047313] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.048644] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 4.048703] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.050074] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 4.050134] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.051485] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 4.051516] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 4.051621] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.053874] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 4.053895] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 4.053910] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 4.054236] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 4.054297] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.054908] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 4.054967] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.056274] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 4.057593] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 4.057646] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 4.057712] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 4.057832] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.058209] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 4.058240] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 4.058276] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 4.059356] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 4.059400] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 4.059712] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 4.059748] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 4.059912] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 4.061532] pci 0000:01:00.0: [2646:2263] type 00 class 0x010802 <6>[ 4.061569] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 4.062682] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.062695] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 4.062867] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.062880] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.062895] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.063032] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.063045] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.063059] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 4.063089] pci_bus 0000:00: on NUMA node 0 <6>[ 7.083317] Low-power S0 idle used by default for system suspend <6>[ 7.465982] ACPI: EC: interrupt unblocked <6>[ 7.465995] ACPI: EC: event unblocked <6>[ 7.466030] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.466043] ACPI: EC: GPE=0x6e <6>[ 7.466052] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.466068] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.466379] iommu: Default domain type: Translated <6>[ 7.466379] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.467119] SCSI subsystem initialized <7>[ 7.467163] libata version 3.00 loaded. <6>[ 7.467163] ACPI: bus type USB registered <6>[ 7.467163] usbcore: registered new interface driver usbfs <6>[ 7.467163] usbcore: registered new interface driver hub <6>[ 7.467163] usbcore: registered new device driver usb <6>[ 7.468005] efivars: Registered efivars operations <6>[ 7.468005] Advanced Linux Sound Architecture Driver Initialized. <6>[ 7.469074] PCI: Using ACPI for IRQ routing <7>[ 7.486838] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.487286] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 7.487541] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.487552] e820: reserve RAM buffer [mem 0x67f4e000-0x67ffffff] <7>[ 7.487555] e820: reserve RAM buffer [mem 0x67fa9000-0x67ffffff] <7>[ 7.487558] e820: reserve RAM buffer [mem 0x6ca41000-0x6fffffff] <7>[ 7.487560] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 7.487837] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.487853] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.487862] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.487884] vgaarb: loaded <6>[ 7.487980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 7.487997] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 7.489941] clocksource: Switched to clocksource tsc-early <6>[ 7.490739] pnp: PnP ACPI init <6>[ 7.491499] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.491515] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.492060] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.493353] system 00:03: [io 0x06a4] has been reserved <6>[ 7.493366] system 00:03: [io 0x06a0] has been reserved <6>[ 7.512996] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.513015] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.513031] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.513044] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.513058] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.513073] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.513088] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.513102] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.518046] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 7.519214] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 7.522838] pnp: PnP ACPI: found 8 devices <6>[ 7.533240] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.533473] NET: Registered PF_INET protocol family <6>[ 7.533758] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.536039] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 7.536307] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.536332] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.536583] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 7.538559] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.538888] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.539568] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.540229] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.540266] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 7.540281] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 7.540315] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 7.540325] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 7.540335] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 7.540421] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 7.540471] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 7.540521] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 7.540569] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 7.540620] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 7.540668] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 7.540706] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.540735] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 7.540750] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.540768] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.540780] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 7.540791] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.540806] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.540815] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.540827] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 7.540838] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.540854] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.540863] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.540872] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.540882] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 7.540892] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.540903] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 7.540913] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.540921] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 7.540930] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.540941] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.540950] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 7.540958] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.542069] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.543863] PCI: CLS 0 bytes, default 64 <6>[ 7.543940] DMAR: No RMRR found <6>[ 7.543960] DMAR: No ATSR found <6>[ 7.543967] DMAR: IOMMU feature nest inconsistent <6>[ 7.543970] DMAR: IOMMU feature sc_support inconsistent <6>[ 7.543982] DMAR: dmar0: Using Queued invalidation <6>[ 7.544017] DMAR: dmar1: Using Queued invalidation <6>[ 7.544935] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.546205] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.546267] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.546320] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.546401] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.546492] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.546578] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.546636] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.546689] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.546741] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.546821] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.546866] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.546930] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.547007] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.547051] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.547154] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.547199] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.547245] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.547291] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.547367] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.547420] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.547498] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.547546] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.547659] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.547707] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.547760] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.547810] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.547859] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.547932] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.561892] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.561904] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.561913] software IO TLB: mapped [mem 0x00000000635c1000-0x00000000675c1000] (64MB) <6>[ 7.562274] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.562287] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.562296] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.562306] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.562314] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.564300] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.564362] clocksource: Switched to clocksource tsc <6>[ 7.564475] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 7.575080] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 7.577349] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 7.580836] NET: Registered PF_ALG protocol family <6>[ 7.580856] xor: measuring software checksum speed <6>[ 7.581094] prefetch64-sse : 42924 MB/sec <6>[ 7.581340] generic_sse : 41386 MB/sec <6>[ 7.581346] xor: using function: prefetch64-sse (42924 MB/sec) <6>[ 7.581399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 7.581413] io scheduler mq-deadline registered <6>[ 7.581421] io scheduler kyber registered <6>[ 7.582954] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.584174] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.584322] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.585870] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.585987] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.586614] efifb: probing for efifb <6>[ 7.586641] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 7.586652] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 7.586661] efifb: scrolling: redraw <6>[ 7.586667] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 7.590809] Console: switching to colour frame buffer device 360x112 <6>[ 7.594631] fb0: EFI VGA frame buffer device <6>[ 7.595339] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.595553] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.596482] ACPI: button: Lid Switch [LID0] <6>[ 7.596661] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.596786] ACPI: button: Sleep Button [SLPB] <6>[ 7.596922] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.597149] ACPI: button: Power Button [PWRB] <6>[ 7.657485] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 7.657507] ACPI: thermal: Thermal Zone [TZ00] (39 C) <6>[ 7.658072] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 7.658568] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.658924] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.659276] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.659641] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 7.661110] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 7.662430] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 7.663294] Non-volatile memory driver v1.3 <6>[ 7.663428] Linux agpgart interface v0.103 <6>[ 7.695241] ACPI: bus type drm_connector registered <6>[ 7.705201] loop: module loaded <6>[ 7.705905] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 7.706173] nvme nvme0: pci function 0000:01:00.0 <6>[ 7.706589] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.706667] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 7.708393] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.709164] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.709190] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.709215] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.709478] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.709526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.709558] usb usb1: Product: xHCI Host Controller <6>[ 7.709581] usb usb1: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.709617] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.710633] hub 1-0:1.0: USB hub found <6>[ 7.710733] hub 1-0:1.0: 1 port detected <4>[ 7.712233] nvme nvme0: missing or invalid SUBNQN field. <6>[ 7.716051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.716092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.716126] usb usb2: Product: xHCI Host Controller <6>[ 7.716149] usb usb2: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.716186] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.716936] hub 2-0:1.0: USB hub found <6>[ 7.716997] hub 2-0:1.0: 4 ports detected <6>[ 7.717326] nvme nvme0: 15/0/0 default/read/poll queues <6>[ 7.725478] nvme0n1: p1 p2 <6>[ 7.738796] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.738827] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.740402] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.741011] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.741037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.741062] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.741198] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.741223] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.741245] usb usb3: Product: xHCI Host Controller <6>[ 7.741259] usb usb3: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.741283] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.741754] hub 3-0:1.0: USB hub found <6>[ 7.741796] hub 3-0:1.0: 12 ports detected <6>[ 7.763656] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.763683] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.763705] usb usb4: Product: xHCI Host Controller <6>[ 7.763720] usb usb4: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.763743] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 7.764118] hub 4-0:1.0: USB hub found <6>[ 7.764173] hub 4-0:1.0: 2 ports detected <6>[ 7.767411] usbcore: registered new interface driver usb-storage <6>[ 7.767628] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 7.767648] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.469379] i8042: Can't read CTR while initializing i8042 <4>[ 8.469398] i8042: probe of i8042 failed with error -5 <6>[ 8.469554] mousedev: PS/2 mouse device common for all mice <6>[ 8.469987] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.471155] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.471319] rtc_cmos rtc_cmos: setting system clock to 1998-02-16T16:52:31 UTC (887647951) <6>[ 8.471457] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.471543] IR JVC protocol handler initialized <6>[ 8.471558] IR MCE Keyboard/mouse protocol handler initialized <6>[ 8.471574] IR NEC protocol handler initialized <6>[ 8.471587] IR RC5(x/sz) protocol handler initialized <6>[ 8.471601] IR RC6 protocol handler initialized <6>[ 8.471614] IR SANYO protocol handler initialized <6>[ 8.472387] IR Sharp protocol handler initialized <6>[ 8.473152] IR Sony protocol handler initialized <6>[ 8.474006] IR XMP protocol handler initialized <6>[ 8.475952] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.476747] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.477535] device-mapper: uevent: version 1.0.3 <6>[ 8.478467] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 8.479248] intel_pstate: Intel P-state driver initializing <6>[ 8.483862] intel_pstate: HWP enabled <6>[ 8.484707] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.485554] sdhci: Copyright(c) Pierre Ossman <6>[ 8.510766] pstore: Registered efi_pstore as persistent store backend <6>[ 8.517057] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.524174] usbcore: registered new interface driver usbhid <6>[ 8.529482] usbhid: USB HID core driver <6>[ 8.536141] pci 0000:00:08.0: Setting to D3hot <6>[ 8.553606] pci 0000:00:05.0: Setting to D3hot <6>[ 8.570745] pci 0000:00:0b.0: Setting to D3hot <6>[ 8.588158] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 8.593780] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 8.599953] intel_pmc_core INT33A1:00: initialized <6>[ 8.606548] intel_rapl_msr: PL4 support detected. <6>[ 8.612635] intel_rapl_common: Found RAPL domain package <6>[ 8.617314] intel_rapl_common: Found RAPL domain core <6>[ 8.622149] intel_rapl_common: Found RAPL domain uncore <6>[ 8.627725] intel_rapl_common: Found RAPL domain psys <6>[ 8.643513] Initializing XFRM netlink socket <6>[ 8.649111] NET: Registered PF_INET6 protocol family <6>[ 8.661773] Segment Routing with IPv6 <6>[ 8.666896] In-situ OAM (IOAM) with IPv6 <6>[ 8.671709] mip6: Mobile IPv6 <6>[ 8.676487] NET: Registered PF_PACKET protocol family <6>[ 8.680948] NET: Registered PF_KEY protocol family <6>[ 8.696067] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 8.718127] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 8.722177] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 8.726089] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 8.730357] usb 4-1: Manufacturer: Realtek <6>[ 8.730890] IPI shorthand broadcast: enabled <6>[ 8.734620] usb 4-1: SerialNumber: 000001 <6>[ 8.739725] AVX2 version of gcm_enc/dec engaged. <6>[ 8.748590] AES CTR mode by8 optimization enabled <6>[ 8.846933] sched_clock: Marking stable (8840015088, 6367825)->(8876142681, -29759768) <6>[ 8.853548] registered taskstats version 1 <6>[ 8.967989] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 8.994164] Btrfs loaded, zoned=no, fsverity=no <6>[ 8.999554] pstore: Using crash dump compression: deflate <6>[ 9.023187] clk: Disabling unused clocks <6>[ 9.027999] ALSA device list: <6>[ 9.032585] No soundcards found. <6>[ 9.038469] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 9.221497] EXT4-fs (nvme0n1p2): mounted filesystem 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 ro with ordered data mode. Quota mode: disabled. <6>[ 9.226491] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.234988] devtmpfs: mounted <6>[ 9.242647] Freeing unused kernel image (initmem) memory: 2564K <6>[ 9.246617] Write protecting the kernel read-only data: 22528k <6>[ 9.252906] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 9.256482] Run /sbin/init as init process <7>[ 9.260809] with arguments: <7>[ 9.260820] /sbin/init <7>[ 9.260829] 3 <7>[ 9.260837] with environment: <7>[ 9.260845] HOME=/ <7>[ 9.260854] TERM=linux <7>[ 9.260862] BOOT_IMAGE=/boot/drm_intel <7>[ 9.596980] systemd[1]: System time before build time, advancing clock. <7>[ 9.937942] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 9.947261] systemd[1]: Detected architecture x86-64. <7>[ 10.053655] systemd[1]: Set hostname to . <6>[ 10.288425] cat (189) used greatest stack depth: 12696 bytes left <6>[ 10.290924] friendly-recove (186) used greatest stack depth: 12008 bytes left <7>[ 11.283744] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 11.288992] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 11.305689] systemd[1]: Created slice system-modprobe.slice. <7>[ 11.341014] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 11.375460] systemd[1]: Created slice User and Session Slice. <7>[ 11.407179] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 11.438190] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 11.443759] systemd[1]: Reached target Remote File Systems. <7>[ 11.474094] systemd[1]: Reached target Slices. <7>[ 11.506146] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 11.538883] systemd[1]: Listening on Syslog Socket. <7>[ 11.571243] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 11.602954] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 11.676146] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 11.683957] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 11.717691] systemd[1]: Listening on Journal Socket. <7>[ 11.750260] systemd[1]: Listening on udev Control Socket. <7>[ 11.782551] systemd[1]: Listening on udev Kernel Socket. <7>[ 11.843791] systemd[1]: Mounting Huge Pages File System... <7>[ 11.903617] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 11.927248] systemd[1]: Mounting Kernel Debug File System... <7>[ 11.940782] systemd[1]: Mounting Kernel Trace File System... <7>[ 11.956586] systemd[1]: Starting Journal Service... <7>[ 11.970047] systemd[1]: Starting Set the console keyboard layout... <7>[ 11.983110] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 11.988894] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 11.991884] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 12.017187] systemd[1]: Starting File System Check on Root Device... <7>[ 12.083135] systemd[1]: Starting Load Kernel Modules... <7>[ 12.144972] systemd[1]: Starting udev Coldplug all Devices... <7>[ 12.166875] systemd[1]: Starting Uncomplicated firewall... <7>[ 12.188247] systemd[1]: Started Journal Service. <6>[ 12.788496] EXT4-fs (nvme0n1p2): re-mounted 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 r/w. Quota mode: disabled. <6>[ 12.900555] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 12.974241] systemd-journald[215]: Received client request to flush runtime journal. <5>[ 12.990440] systemd-journald[215]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 14.797436] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.830221] pps_core: LinuxPPS API ver. 1 registered <6>[ 14.830236] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 14.835137] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 14.835366] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 15.437053] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 15.437089] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 15.457100] PTP clock support registered <6>[ 15.459286] usbcore: registered new device driver r8152-cfgselector <6>[ 15.511472] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 15.511485] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 15.517654] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 15.545142] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 15.545561] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 15.651012] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 15.652643] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 15.722023] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 15.727196] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 15.759924] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 15.760301] usbcore: registered new interface driver r8152 <6>[ 15.773477] usbcore: registered new interface driver cdc_ether <6>[ 15.779475] usbcore: registered new interface driver r8153_ecm <6>[ 15.789822] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 15.790022] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 15.790173] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 15.807455] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 16.008007] r8152 4-1:1.0 enx00e04c6814c9: renamed from eth0 <6>[ 16.075748] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <4>[ 16.217442] ********************************************************** <4>[ 16.217446] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.217448] ** ** <4>[ 16.217450] ** trace_printk() being used. Allocating extra memory. ** <4>[ 16.217453] ** ** <4>[ 16.217455] ** This means that this is a DEBUG kernel and it is ** <4>[ 16.217457] ** unsafe for production use. ** <4>[ 16.217459] ** ** <4>[ 16.217461] ** If you see this message and you are not debugging ** <4>[ 16.217463] ** the kernel, report this immediately to your vendor! ** <4>[ 16.217466] ** ** <4>[ 16.217468] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 16.217470] ********************************************************** <6>[ 16.400921] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 16.404429] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.405156] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 16.405829] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 16.405887] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 16.406479] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 16.407106] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 16.407717] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 16.408334] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 16.409347] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 16.410012] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 16.411459] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 16.411964] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 16.413539] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 16.414013] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 16.414360] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 16.416160] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 16.416679] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 16.417037] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 16.417390] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 16.420744] Console: switching to colour dummy device 80x25 <6>[ 16.429743] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 16.430606] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 16.430647] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 16.431255] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 16.431866] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 16.432315] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 16.433906] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0c018 <7>[ 16.434637] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <6>[ 16.435271] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 16.435149] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 16.435665] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 16.436154] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 16.436624] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 16.437145] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 16.437626] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 16.438025] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 16.438407] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 16.438991] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 16.439584] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 16.440125] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 16.440703] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 16.441240] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.441819] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.442323] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.442853] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 16.443358] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.443874] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.444349] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.444836] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 16.445295] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.445770] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.446223] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.446707] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 16.447170] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.447740] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.448227] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.448743] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 16.449223] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.449698] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.450166] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.450659] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 16.451124] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 16.451646] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.452155] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 16.454688] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 16.455264] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 16.455844] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 16.456415] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 16.456943] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 16.457502] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 16.458007] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 16.458568] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 16.459082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 16.459635] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 16.460136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 16.460656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 16.461163] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 16.461681] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 16.462161] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 16.462649] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 16.463119] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 16.463613] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 16.464100] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 16.464614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 16.465104] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.465626] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 16.466126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.466637] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 16.467134] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 16.467644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.468154] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 16.468694] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.469181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 16.469665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.470153] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 16.470665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 16.471165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 16.471689] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.472179] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 16.472667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 16.473139] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 16.473635] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 16.474230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 16.475014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 16.475716] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 16.476601] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 16.477312] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 16.478018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 16.478581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 16.479084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 16.479671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 16.480213] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 16.480325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 16.480994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 16.481559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 16.482068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 16.482774] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 16.499761] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 16.501921] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 16.502562] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 16.503070] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 16.503556] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 16.504017] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 16.504469] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 16.504910] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 16.506605] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 16.552721] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 16.561118] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 16.564330] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 16.565022] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 16.565685] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 16.566252] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 16.566989] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 16.567691] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 16.568237] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 16.568791] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 16.569295] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 16.569799] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 16.570300] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 16.570790] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 16.571257] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 16.571946] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 16.572628] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 16.573115] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 16.573576] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 16.574002] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 16.574428] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 16.575067] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 16.575848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 16.578072] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 16.578895] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 16.582070] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 16.583019] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 16.583915] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 16.585309] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 16.587533] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 16.590733] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 16.591264] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 16.602448] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 16.602501] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 16.602513] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 16.602673] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 16.604118] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 16.605494] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 16.606154] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 16.606825] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 16.607488] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 16.607951] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 16.608403] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 16.608823] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 16.609236] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 16.609811] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 16.611011] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 16.611596] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 16.612925] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 16.613451] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 16.614286] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 16.615473] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.616243] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 16.617493] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 16.618157] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 16.618942] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 16.619514] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 16.619988] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 16.620752] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 16.621351] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.622194] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 16.623366] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 16.624035] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 16.624728] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 16.626957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 16.627887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 16.628700] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 16.629488] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 16.629999] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 16.630616] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 16.631126] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 16.631628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 16.632097] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 16.632579] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 16.633045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 16.633524] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 16.633972] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 16.634527] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 16.635005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 16.635512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 16.635978] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 16.636471] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 16.636950] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 16.637455] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 16.637913] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 16.638395] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 16.638846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 16.639300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 16.639848] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 16.640321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 16.640817] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 16.641282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 16.642508] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 16.643072] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 16.643666] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 16.644152] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 16.644623] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 16.645061] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 16.645515] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 16.645953] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 16.646402] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 16.646901] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 16.647406] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 16.647974] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 16.648533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 16.649007] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.649501] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.649963] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.650420] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.650958] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 16.651485] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 16.651952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.652418] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.652859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.653292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.653877] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 16.654363] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 16.654875] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 16.655334] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 16.655803] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.656240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.656704] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.657150] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.657636] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 16.658107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 16.658581] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 16.659042] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 16.659508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 16.659952] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 16.660889] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 16.661564] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 16.662103] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 16.662655] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 16.663157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 16.663680] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 16.664196] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 16.666055] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 16.666691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 16.667221] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 16.667719] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 16.668182] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 16.668663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 16.669127] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 16.669699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 16.670176] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 16.670660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 16.671115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 16.671587] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 16.672030] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 16.672502] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 16.673047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 16.673557] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 16.674022] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 16.674507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 16.674961] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 16.675450] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 16.675911] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 16.676498] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 16.677015] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 16.677513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 16.677977] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 16.678443] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 16.678888] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 16.679311] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 16.680649] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 16.681257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 16.681810] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 16.682311] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 16.682817] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 16.683301] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 16.683846] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 16.684323] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 16.684825] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 16.685293] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 16.685779] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 16.686259] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 16.686746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.687227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.687720] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.688190] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 16.688687] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 16.689171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 16.689667] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 16.690144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 16.690642] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 16.691135] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 16.691632] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 16.692175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 16.692724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 16.693225] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.693732] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.694216] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.694712] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.695183] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.695668] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 16.696146] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.696633] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.697110] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 16.697591] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 16.698065] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 16.698555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 16.699029] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 16.699830] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 16.700354] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.700858] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.701319] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 16.703043] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 16.703625] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 16.724007] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 16.743150] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 16.743785] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 16.744234] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 16.745338] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 16.745351] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 16.745357] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 16.745431] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 16.749246] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 16.749953] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 16.750500] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 16.753833] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 16.754472] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 16.756079] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 16.756650] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 16.761729] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 16.762451] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 16.763040] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 16.814456] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 16.830522] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 16.831165] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 16.831734] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 16.832716] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 16.833266] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 16.833806] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 16.834294] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 16.834806] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 16.835264] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 16.835779] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 16.836254] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 16.836765] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 16.837237] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 16.837722] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 16.839842] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 16.852528] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2200MHz, before = 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 16.854917] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 16.857811] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 16.857822] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 16.859407] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 16.876462] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 16.876502] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 16.878087] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 16.878657] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 16.880126] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 16.880689] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 16.882103] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 16.882633] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 16.886607] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 16.887272] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 16.887882] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 16.952630] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 16.953263] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 16.953807] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 16.954292] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 16.954862] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 16.955339] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 16.955818] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 16.956274] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 16.956743] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 16.957196] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 16.957664] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 16.958099] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 16.958612] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 16.959054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 16.959520] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 16.961779] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 16.961803] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 16.981175] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 17ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 16.982173] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 16.991520] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 16.993505] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 16.993522] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 16.993890] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 17.001472] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.002742] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.003499] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 17.004182] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 17.004999] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 17.005555] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 17.006007] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 17.006478] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 17.006913] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 17.007503] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 17.008001] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 17.008657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 17.009193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 17.009814] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 17.010471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 17.011002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 17.011659] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 17.012142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 17.012640] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.013106] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.013668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.014130] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.014593] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.015032] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.015486] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.015911] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.016330] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.016784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.017218] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.017678] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.018100] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.018542] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.018967] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.019415] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.019841] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.020252] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.020688] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.021098] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.021543] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 17.021959] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.022432] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 17.022861] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 17.023492] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 17.023510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 17.024107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 17.024673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 17.025192] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 17.025724] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 17.026225] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 17.026742] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 17.027247] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 17.027773] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 17.028265] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 17.028768] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 17.029240] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 17.029248] i915 0000:00:02.0: pixelformat: RGB <7>[ 17.029255] i915 0000:00:02.0: colorimetry: sRGB <7>[ 17.029262] i915 0000:00:02.0: bpc: 0 <7>[ 17.029268] i915 0000:00:02.0: dynamic range: VESA range <7>[ 17.029275] i915 0000:00:02.0: content type: Not defined <7>[ 17.029282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 17.029783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.030278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 17.030797] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.031282] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.031790] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.032287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 17.032838] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 17.033338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 17.033864] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 17.034402] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 17.034896] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 17.035454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 17.035968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 17.036491] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.037011] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.037556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.038046] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.038594] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.039130] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.039658] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.040156] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.040661] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.041135] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.041640] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 17.042128] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 17.042623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 17.043092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 17.043582] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 17.044057] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 17.046511] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 17.255647] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 17.257126] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 17.260188] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 17.260919] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 17.261545] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <6>[ 17.286952] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 17.313129] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.313985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 17.315716] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 17.316461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 17.317017] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 17.317570] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 17.318075] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 17.318570] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 17.319026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 17.319535] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 17.320005] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 17.320511] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 17.320972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 17.321461] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 17.321919] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 17.322347] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 17.322798] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 17.323243] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 17.323698] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 17.324141] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 17.324607] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 17.325061] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 17.325525] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 17.325962] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 17.326420] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 17.326910] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 17.327676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 17.329816] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 17.330483] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 17.331020] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 17.919816] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 17.920956] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 17.922004] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 17.923038] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 18.124086] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 18.127703] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 18.128873] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 18.132541] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 18.133560] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 18.135550] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 18.137432] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 18.138364] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 18.140919] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 18.141366] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 18.144938] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 18.145403] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 18.147052] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 18.148571] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 18.149675] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 18.150804] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 18.159500] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 18.161702] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.163057] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 18.166778] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 18.167901] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 18.168942] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 18.169940] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 18.170917] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 18.171869] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 18.172818] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 18.173764] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 18.174715] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 18.175649] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 18.176644] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 18.177637] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 18.179817] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 18.184070] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 18.185434] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 18.186521] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 18.187519] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 18.188505] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 18.189609] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 18.194758] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 18.195915] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 18.196777] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 18.197532] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 18.198225] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 18.198927] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 18.238180] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 18.240204] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 18.246131] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 18.249202] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 18.253233] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 18.255448] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 18.257665] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 18.262909] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 18.265117] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 18.267248] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 18.271200] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 18.273622] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 18.277344] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 18.277719] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 18.292741] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 18.389004] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 18.412876] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 18.421921] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 18.422901] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 18.423663] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 18.425737] [drm:drm_client_modeset_probe] <7>[ 18.425484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 18.427311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 18.427903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 18.428155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 18.428064] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.428834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 18.430759] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 18.431523] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 18.431535] i915 device info: graphics version: 12.71 <7>[ 18.431542] i915 device info: media version: 13 <7>[ 18.431548] i915 device info: display version: 14 <7>[ 18.431554] i915 device info: graphics stepping: B0 <7>[ 18.431560] i915 device info: media stepping: C0 <7>[ 18.431565] i915 device info: display stepping: C0 <7>[ 18.431569] i915 device info: base die stepping: ** <7>[ 18.431574] i915 device info: gt: 0 <7>[ 18.431579] i915 device info: memory-regions: 0x41 <7>[ 18.431584] i915 device info: page-sizes: 0x211000 <7>[ 18.431590] i915 device info: platform: METEORLAKE <7>[ 18.431596] i915 device info: ppgtt-size: 48 <7>[ 18.431601] i915 device info: ppgtt-type: 2 <7>[ 18.431606] i915 device info: dma_mask_size: 46 <7>[ 18.431611] i915 device info: is_mobile: no <7>[ 18.431617] i915 device info: is_lp: no <7>[ 18.431622] i915 device info: require_force_probe: yes <7>[ 18.431627] i915 device info: is_dgfx: no <7>[ 18.431632] i915 device info: has_64bit_reloc: yes <7>[ 18.431637] i915 device info: has_64k_pages: no <7>[ 18.431641] i915 device info: gpu_reset_clobbers_display: no <7>[ 18.431646] i915 device info: has_reset_engine: yes <7>[ 18.431651] i915 device info: has_3d_pipeline: yes <7>[ 18.431656] i915 device info: has_4tile: yes <7>[ 18.431661] i915 device info: has_flat_ccs: no <7>[ 18.431667] i915 device info: has_global_mocs: yes <7>[ 18.431671] i915 device info: has_gmd_id: yes <7>[ 18.431676] i915 device info: has_gt_uc: yes <7>[ 18.431680] i915 device info: has_heci_pxp: no <7>[ 18.431685] i915 device info: has_heci_gscfi: no <7>[ 18.431689] i915 device info: has_guc_deprivilege: yes <7>[ 18.431694] i915 device info: has_l3_ccs_read: no <7>[ 18.431699] i915 device info: has_l3_dpf: no <7>[ 18.431703] i915 device info: has_llc: no <7>[ 18.431708] i915 device info: has_logical_ring_contexts: yes <7>[ 18.431713] i915 device info: has_logical_ring_elsq: yes <7>[ 18.431717] i915 device info: has_media_ratio_mode: no <7>[ 18.431722] i915 device info: has_mslice_steering: no <7>[ 18.431727] i915 device info: has_oa_bpc_reporting: yes <7>[ 18.431731] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 18.431736] i915 device info: has_oam: yes <7>[ 18.431740] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 18.431745] i915 device info: has_pxp: yes <7>[ 18.431750] i915 device info: has_rc6: yes <7>[ 18.431756] i915 device info: has_rc6p: no <7>[ 18.431761] i915 device info: has_rps: yes <7>[ 18.431765] i915 device info: has_runtime_pm: yes <7>[ 18.431770] i915 device info: has_snoop: yes <7>[ 18.431774] i915 device info: has_coherent_ggtt: no <7>[ 18.431779] i915 device info: tuning_thread_rr_after_dep: no <7>[ 18.431784] i915 device info: unfenced_needs_alignment: no <7>[ 18.431789] i915 device info: hws_needs_physical: no <7>[ 18.431794] i915 device info: has_pooled_eu: no <7>[ 18.431799] i915 device info: cursor_needs_physical: no <7>[ 18.431803] i915 device info: has_cdclk_crawl: yes <7>[ 18.431808] i915 device info: has_cdclk_squash: yes <7>[ 18.431813] i915 device info: has_ddi: yes <7>[ 18.431818] i915 device info: has_dp_mst: yes <7>[ 18.431822] i915 device info: has_dsb: yes <7>[ 18.431827] i915 device info: has_fpga_dbg: yes <7>[ 18.431832] i915 device info: has_gmch: no <7>[ 18.431837] i915 device info: has_hotplug: yes <7>[ 18.431842] i915 device info: has_hti: no <7>[ 18.431846] i915 device info: has_ipc: yes <7>[ 18.431851] i915 device info: has_overlay: no <7>[ 18.431857] i915 device info: has_psr: yes <7>[ 18.431861] i915 device info: has_psr_hw_tracking: no <7>[ 18.431866] i915 device info: overlay_needs_physical: no <7>[ 18.431870] i915 device info: supports_tv: no <7>[ 18.431875] i915 device info: has_hdcp: yes <7>[ 18.431880] i915 device info: has_dmc: yes <7>[ 18.431884] i915 device info: has_dsc: yes <7>[ 18.431889] i915 device info: rawclk rate: 38400 kHz <7>[ 18.431895] i915 device info: iommu: enabled <7>[ 18.431902] i915 device info: available engines: 400003 <7>[ 18.431910] i915 device info: subslice total: 8 <7>[ 18.431915] i915 device info: geometry dss mask=00000000,000000ff <7>[ 18.431922] i915 device info: compute dss mask=00000000,000000ff <7>[ 18.431927] i915 device info: EU total: 128 <7>[ 18.431932] i915 device info: EU per subslice: 16 <7>[ 18.431937] i915 device info: has slice power gating: no <7>[ 18.431942] i915 device info: has subslice power gating: no <7>[ 18.431947] i915 device info: has EU power gating: no <7>[ 18.431952] i915 device info: available engines: 41400 <7>[ 18.431957] i915 device info: subslice total: 8 <7>[ 18.431962] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 18.431967] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 18.431972] i915 device info: EU total: 128 <7>[ 18.431976] i915 device info: EU per subslice: 16 <7>[ 18.431981] i915 device info: has slice power gating: no <7>[ 18.431985] i915 device info: has subslice power gating: no <7>[ 18.431990] i915 device info: has EU power gating: no <6>[ 18.431998] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 18.432004] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 18.432009] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 18.432168] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.432899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 18.434432] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.434937] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 18.435425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.435864] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.436629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.436653] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.436667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.436780] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.437410] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.439477] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.439958] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.441324] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 18.442636] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.442731] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.442760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 18.442819] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.444777] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 18.444898] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 18.444983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.445064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.446282] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 18.446464] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.446548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 18.446624] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.448069] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 18.448150] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 18.448211] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.448276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.449323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 18.449471] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.449549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 18.449622] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.450657] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 18.450733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 18.450793] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 18.450853] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.453775] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 18.453874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 18.453948] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.453970] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.453983] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.453996] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.454008] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.454020] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.454033] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.454523] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.454594] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.454608] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.454621] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.454632] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 18.454678] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.454936] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 18.455143] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 18.472194] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 18.476865] fbcon: i915drmfb (fb0) is primary device <7>[ 18.481836] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 18.483138] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 18.484244] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 18.485275] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 18.486345] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 18.487353] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 18.488451] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 18.489637] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 18.490647] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 18.491595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 18.492460] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 18.493240] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 18.494194] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 18.495318] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 18.496356] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 18.497257] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 18.498174] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 3: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 18.499070] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 18.499999] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 18.501062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 18.501938] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 18.502793] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 18.503754] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 18.504743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 18.505749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 18.506710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 18.507650] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 18.508598] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 18.509510] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 18.510363] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 18.511352] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 18.511367] i915 0000:00:02.0: pixelformat: RGB <7>[ 18.511438] i915 0000:00:02.0: colorimetry: sRGB <7>[ 18.511448] i915 0000:00:02.0: bpc: 0 <7>[ 18.511457] i915 0000:00:02.0: dynamic range: VESA range <7>[ 18.511465] i915 0000:00:02.0: content type: Not defined <7>[ 18.511475] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 18.512557] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.513515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.514653] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.515627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 18.516530] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.517480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 18.518653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 18.519842] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 18.520835] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 18.521996] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 18.523152] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 18.524471] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 18.525628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 18.526837] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.528027] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.529225] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.530443] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.531583] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.532715] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.533868] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.535010] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.536157] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.537362] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.538590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 18.539761] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 18.540917] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 18.542071] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 18.543222] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 18.544466] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 18.545592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 18.546715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 18.550573] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 18.552624] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 18.553936] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 18.555168] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 18.556458] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 18.557621] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 18.558783] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 18.560205] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 18.561451] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 18.562546] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 18.563639] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 18.564716] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 18.565805] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 18.566907] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 18.568018] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 18.569140] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 18.570225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 18.571319] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 18.572443] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 18.573488] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 18.574540] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 18.575567] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 18.576611] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 18.581638] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 18.587159] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.587756] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 18.591136] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 18.592443] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 18.593652] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 18.594853] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 18.596035] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 18.597156] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 18.598284] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 18.599460] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 18.600510] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 18.601518] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 18.602616] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 18.629613] Console: switching to colour frame buffer device 360x112 <6>[ 18.661428] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 18.677788] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 18.677893] [drm:drm_client_modeset_probe] <7>[ 18.678751] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 18.678862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.682177] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.682806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 18.684023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 18.684484] r8152 4-1:1.0 enx00e04c6814c9: carrier on <7>[ 18.685085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.685142] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 18.685537] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 18.685944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.686357] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.687089] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.687109] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.687118] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.687194] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.687697] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.691456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.691872] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.693485] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.693563] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.693583] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 18.693637] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.694826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 18.694888] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.694936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.695513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.695564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 18.695601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.696305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 18.696350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.696435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.696981] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.697021] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 18.697056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.697581] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 18.697621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 18.697656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.698136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 18.698173] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.698183] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.698188] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.698193] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.698197] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.698202] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.698208] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.698588] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.698655] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.698666] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.698673] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.698680] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 18.698791] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.716290] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 18.716579] [drm:drm_client_modeset_probe] <7>[ 18.716741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 18.716811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 18.718605] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.719038] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 18.720334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 18.720751] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 18.721129] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 18.721520] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 18.721979] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 18.721994] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 18.722004] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 18.722053] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 18.722487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 18.723951] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 18.724414] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 18.725829] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 18.725876] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.725892] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 18.725930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 18.726432] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 18.726474] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.726512] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 18.726976] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 18.727019] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 18.727057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 18.727614] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 18.727654] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.727690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 18.728178] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 18.728215] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 18.728250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 18.728746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 18.728785] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 18.728821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 18.729294] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 18.729330] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 18.729338] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 18.729343] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 18.729347] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 18.729352] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 18.729357] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 18.729361] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 18.729459] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 18.729488] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 18.729496] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 18.729503] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 18.729509] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 18.729546] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 18.767048] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 18.767964] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 18.768798] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 18.770273] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 18.771043] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 18.771826] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 18.772599] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 18.773328] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 18.774111] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 18.774870] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 18.775636] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 18.776357] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 18.777261] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 18.778056] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 18.778813] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 18.779564] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 18.780282] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 18.781072] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 18.781868] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 18.782644] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 18.783352] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 18.784155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 18.784929] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 18.785711] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 18.786464] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 18.787183] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 18.787947] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 18.788694] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 18.789417] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 18.790124] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 18.790782] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 18.791456] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 18.792073] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 18.792724] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 18.793331] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 18.793999] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 18.806284] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 18.810357] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 18.812574] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 18.815430] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 18.853293] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 18.854294] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 21.763050] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 21.764560] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <6>[ 22.255244] systemd-udevd (286) used greatest stack depth: 11832 bytes left <6>[ 22.284312] systemd-udevd (311) used greatest stack depth: 11528 bytes left <6>[ 22.286799] systemd-udevd (255) used greatest stack depth: 11400 bytes left <6>[ 22.287182] systemd-udevd (261) used greatest stack depth: 11216 bytes left <7>[ 22.552733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.554685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 22.556060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 22.557339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7>[ 25.027005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 25.029263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 25.043120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.044464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.045444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 37.832766] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=675 'systemd' <5>[ 38.292973] systemd-journald[215]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 38.365368] systemd-journald[215]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 39.215009] fuse: init (API version 7.38)