<5>[ 0.000000] Linux version 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ (kbuild@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 30 20:54:56 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca40fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca41000-0x000000006fdb8fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdb9000-0x000000006fedffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe15000 SMBIOS=0x6cb18000 MEMATTR=0x67fa7698 ESRT=0x67fafa98 TPMEventLog=0x67f6d018 <6>[ 0.000000] efi: Remove mem283: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem285: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000019] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000397] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000400] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000402] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000403] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000406] esrt: Reserving ESRT space from 0x0000000067fafa98 to 0x0000000067fafc10. <7>[ 0.000411] e820: update [mem 0x67faf000-0x67faffff] usable ==> reserved <6>[ 0.000428] Using GB pages for direct mapping <6>[ 0.001181] printk: log_buf_len: 1048576 bytes <6>[ 0.001183] printk: early log buf free: 259112(98%) <6>[ 0.001184] Secure boot disabled <6>[ 0.001185] ACPI: Early table checksum verification disabled <6>[ 0.001188] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001191] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001197] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001200] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001203] ACPI: FACS 0x000000006FDFA000 000040 <6>[ 0.001205] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001210] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001215] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001217] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001222] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001224] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001226] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001229] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001231] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001233] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001235] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001238] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001240] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001242] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001244] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001247] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001249] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001251] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001253] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001258] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001260] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001263] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001265] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001267] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001269] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001272] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001274] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001276] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001278] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001281] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001283] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001287] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001290] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001292] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001294] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001297] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001299] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001300] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001300] ACPI: Reserving FACS table memory at [mem 0x6fdfa000-0x6fdfa03f] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001305] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001306] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001309] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001310] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001310] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001311] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001312] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001312] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001314] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001315] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001315] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001316] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001317] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001317] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001318] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001319] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001319] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001321] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001321] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001322] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001323] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001323] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001324] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001325] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001325] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001326] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001327] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001327] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001339] Setting APIC routing to cluster x2apic. <6>[ 0.045877] Zone ranges: <6>[ 0.045879] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045881] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045883] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045884] Movable zone start for each node <6>[ 0.045885] Early memory node ranges <6>[ 0.045885] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045887] node 0: [mem 0x0000000000100000-0x000000006ca40fff] <6>[ 0.045888] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045888] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045890] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045894] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045918] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048372] On node 0, zone DMA32: 13758 pages in unavailable ranges <6>[ 0.090851] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.091636] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.091641] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.091686] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.091689] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.091691] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.091694] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.091695] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.091704] e820: update [mem 0x67f4e000-0x67f68fff] usable ==> reserved <6>[ 0.091711] TSC deadline timer available <6>[ 0.091712] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.091721] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.091723] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.091724] PM: hibernation: Registered nosave memory: [mem 0x67f4e000-0x67f68fff] <6>[ 0.091725] PM: hibernation: Registered nosave memory: [mem 0x67faf000-0x67faffff] <6>[ 0.091726] PM: hibernation: Registered nosave memory: [mem 0x6ca41000-0x6fdb8fff] <6>[ 0.091727] PM: hibernation: Registered nosave memory: [mem 0x6fdb9000-0x6fedffff] <6>[ 0.091727] PM: hibernation: Registered nosave memory: [mem 0x6fee0000-0x6fffefff] <6>[ 0.091728] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.091729] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.091729] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.091730] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.091732] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.091736] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.094992] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.096484] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.096488] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.096490] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.096496] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.096501] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.096513] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.096571] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.096602] random: crng init done <6>[ 0.099423] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.100818] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.100924] Built 1 zonelists, mobility grouping on. Total pages: 8177208 <6>[ 0.100928] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.100929] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.101652] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.101666] software IO TLB: area num 32. <6>[ 0.794841] Memory: 32435360K/33228672K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793056K reserved, 0K cma-reserved) <4>[ 0.794844] ********************************************************** <4>[ 0.794845] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.794846] ** ** <4>[ 0.794846] ** This system shows unhashed kernel memory addresses ** <4>[ 0.794847] ** via the console, logs, and other interfaces. This ** <4>[ 0.794847] ** might reduce the security of your system. ** <4>[ 0.794848] ** ** <4>[ 0.794848] ** If you see this message and you are not debugging ** <4>[ 0.794849] ** the kernel, report this immediately to your system ** <4>[ 0.794849] ** administrator! ** <4>[ 0.794849] ** ** <4>[ 0.794850] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.794850] ********************************************************** <6>[ 0.795026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.795513] Dynamic Preempt: full <6>[ 0.795754] Running RCU self tests <6>[ 0.795755] Running RCU synchronous self tests <6>[ 0.795799] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.795800] rcu: RCU lockdep checking is enabled. <6>[ 0.795801] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.795802] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.795802] Trampoline variant of Tasks RCU enabled. <6>[ 0.795803] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.795804] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.795874] Running RCU synchronous self tests <6>[ 0.799904] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.800272] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.800604] Console: colour dummy device 80x25 <6>[ 0.800618] printk: console [tty0] enabled <4>[ 0.802612] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 0.802625] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 0.802632] ... MAX_LOCK_DEPTH: 48 <4>[ 0.802638] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 0.802645] ... CLASSHASH_SIZE: 4096 <4>[ 0.802651] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 0.802658] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 0.802665] ... CHAINHASH_SIZE: 65536 <4>[ 0.802672] memory used by lock dependency info: 9461 kB <4>[ 0.802680] memory used for stack traces: 8320 kB <4>[ 0.802687] per task-struct memory footprint: 1920 bytes <6>[ 0.802707] ACPI: Core revision 20230331 <6>[ 0.803703] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 0.803887] APIC: Switch to symmetric I/O mode setup <6>[ 0.803896] DMAR: Host address width 42 <6>[ 0.803903] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.803937] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 0.803951] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 0.803971] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 0.803984] DMAR: SATC flags: 0x1 <6>[ 0.803995] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 0.804005] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 0.804013] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.805784] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.810439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 0.814794] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 0.814821] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 0.814886] x86/tme: not enabled by BIOS <6>[ 0.814898] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.814906] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.815100] process: using mwait in idle threads <6>[ 0.815112] CET detected: Indirect Branch Tracking enabled <6>[ 0.815120] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.815128] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.815139] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.815152] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.815160] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 0.815172] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.815184] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.815206] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.815217] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.815226] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.815234] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.815245] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.815253] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.815262] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 0.826864] Freeing SMP alternatives memory: 36K <6>[ 0.826878] pid_max: default: 32768 minimum: 301 <6>[ 0.834903] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.834980] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.835560] Running RCU synchronous self tests <6>[ 0.835570] Running RCU synchronous self tests <6>[ 0.835754] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1003H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 0.835812] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 0.835812] Running RCU-tasks wait API self tests <6>[ 0.942836] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.943113] core: cpu_core PMU driver: <6>[ 0.943128] ... version: 5 <6>[ 0.943135] ... bit width: 48 <6>[ 0.943142] ... generic registers: 8 <6>[ 0.943149] ... value mask: 0000ffffffffffff <6>[ 0.943158] ... max period: 00007fffffffffff <6>[ 0.943167] ... fixed-purpose events: 4 <6>[ 0.943174] ... event mask: 0000000f000000ff <6>[ 0.943240] signal: max sigframe size: 3632 <6>[ 0.943264] Estimated ratio of average max frequency by base frequency (times 1024): 1445 <6>[ 0.944846] rcu: Hierarchical SRCU implementation. <6>[ 0.944853] rcu: Max phase no-delay instances is 400. <6>[ 0.946923] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.947529] smp: Bringing up secondary CPUs ... <6>[ 0.947833] smpboot: x86: Booting SMP configuration: <6>[ 0.947847] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 0.007409] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 0.007409] ... version: 5 <6>[ 0.007409] ... bit width: 48 <6>[ 0.007409] ... generic registers: 8 <6>[ 0.007409] ... value mask: 0000ffffffffffff <6>[ 0.007409] ... max period: 00007fffffffffff <6>[ 0.007409] ... fixed-purpose events: 3 <6>[ 0.007409] ... event mask: 00000007000000ff <4>[ 0.959121] #1 #3 #5 #7 #9 #11 <6>[ 0.964838] smp: Brought up 1 node, 22 CPUs <6>[ 0.964859] smpboot: Max logical packages: 1 <6>[ 0.964866] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 0.969992] devtmpfs: initialized <6>[ 0.971182] ACPI: PM: Registering ACPI NVS region [mem 0x6fdb9000-0x6fedffff] (1208320 bytes) <6>[ 0.971288] Running RCU synchronous self tests <6>[ 0.971309] Running RCU synchronous self tests <6>[ 0.971875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.971895] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 0.972188] pinctrl core: initialized pinctrl subsystem <6>[ 0.972640] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.973855] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.973857] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.973867] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.973933] cpuidle: using governor menu <6>[ 0.973888] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.974147] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 0.974175] PCI: not using MMCONFIG <6>[ 0.974183] PCI: Using configuration type 1 for base access <4>[ 0.975817] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 0.976894] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.977088] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.977107] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.978051] cryptd: max_cpu_qlen set to 1000 <6>[ 0.994882] raid6: avx2x4 gen() 54036 MB/s <6>[ 1.011908] raid6: avx2x2 gen() 53578 MB/s <6>[ 1.028934] raid6: avx2x1 gen() 52976 MB/s <6>[ 1.028941] raid6: using algorithm avx2x4 gen() 54036 MB/s <6>[ 1.045965] raid6: .... xor() 9447 MB/s, rmw enabled <6>[ 1.045974] raid6: using avx2x2 recovery algorithm <6>[ 1.046275] ACPI: Added _OSI(Module Device) <6>[ 1.046282] ACPI: Added _OSI(Processor Device) <6>[ 1.046289] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 1.046296] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 1.054859] Callback from call_rcu_tasks() invoked. <6>[ 1.444252] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 1.455499] ACPI: EC: EC started <6>[ 1.455512] ACPI: EC: interrupt blocked <6>[ 1.459782] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 1.459792] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.725626] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 3.297046] ACPI: Interpreter enabled <6>[ 3.297176] ACPI: PM: (supports S0 S4 S5) <6>[ 3.297186] ACPI: Using IOAPIC for interrupt routing <6>[ 3.297347] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 3.328778] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 3.328807] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 3.328814] PCI: Ignoring E820 reservations for host bridge windows <6>[ 3.354545] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 3.354579] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 3.400163] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 3.524766] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 3.531278] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 3.548323] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 3.555294] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 3.568253] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 3.573879] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 3.580135] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 3.586459] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 3.649253] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 3.649556] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 3.649851] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 3.942984] ACPI: \_TZ_.FN00: New power resource <6>[ 3.943562] ACPI: \_TZ_.FN01: New power resource <6>[ 3.944135] ACPI: \_TZ_.FN02: New power resource <6>[ 3.944698] ACPI: \_TZ_.FN03: New power resource <6>[ 3.945251] ACPI: \_TZ_.FN04: New power resource <6>[ 3.949169] ACPI: \PIN_: New power resource <6>[ 3.951719] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 3.951740] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 3.955197] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 3.961884] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 3.970609] PCI host bridge to bus 0000:00 <6>[ 3.970621] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 3.970634] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 3.970645] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 3.970658] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 3.970672] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 3.970687] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 3.980037] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 3.980582] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 3.980605] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 3.980626] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 3.980680] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 3.980692] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 3.980749] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 3.981885] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 3.981913] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 3.983087] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 3.983106] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 3.983135] pci 0000:00:05.0: enabling Extended Tags <6>[ 3.984155] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 3.984436] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 3.988848] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 3.989083] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 3.992910] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 3.993138] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 3.996948] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 3.996975] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 3.997386] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 3.997405] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 3.997435] pci 0000:00:0a.0: enabling Extended Tags <6>[ 3.997647] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 3.997667] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 3.997692] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 3.998116] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 3.998141] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 3.998227] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 3.999771] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 3.999797] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 3.999817] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 3.999894] pci 0000:00:0d.3: supports D1 D2 <6>[ 3.999901] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 4.001081] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 4.001104] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 4.001177] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 4.003531] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 4.003557] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 4.003645] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 4.005452] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 4.005479] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 4.005501] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 4.005851] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 4.005912] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.007272] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 4.007332] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.008683] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 4.008740] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.010135] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 4.010196] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.011555] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 4.011587] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 4.011693] pci 0000:00:16.0: PME# supported from D3hot <6>[ 4.013986] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 4.014008] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 4.014022] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 4.014349] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 4.014407] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.015031] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 4.015088] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 4.016402] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 4.017727] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 4.017781] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 4.017845] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 4.017974] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 4.018352] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 4.018383] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 4.018419] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 4.019513] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 4.019557] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 4.019870] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 4.019907] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 4.020067] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 4.021702] pci 0000:01:00.0: [2646:2263] type 00 class 0x010802 <6>[ 4.021739] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 4.022862] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 4.022875] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 4.023053] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 4.023066] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 4.023083] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 4.023241] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 4.023255] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 4.023270] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 4.023300] pci_bus 0000:00: on NUMA node 0 <6>[ 7.025696] Low-power S0 idle used by default for system suspend <6>[ 7.405312] ACPI: EC: interrupt unblocked <6>[ 7.405325] ACPI: EC: event unblocked <6>[ 7.405359] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 7.405372] ACPI: EC: GPE=0x6e <6>[ 7.405381] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 7.405397] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 7.405888] iommu: Default domain type: Translated <6>[ 7.405888] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 7.406318] SCSI subsystem initialized <7>[ 7.406364] libata version 3.00 loaded. <6>[ 7.406364] ACPI: bus type USB registered <6>[ 7.406364] usbcore: registered new interface driver usbfs <6>[ 7.406364] usbcore: registered new interface driver hub <6>[ 7.406364] usbcore: registered new device driver usb <6>[ 7.407027] efivars: Registered efivars operations <6>[ 7.407882] Advanced Linux Sound Architecture Driver Initialized. <6>[ 7.408373] PCI: Using ACPI for IRQ routing <7>[ 7.426167] PCI: pci_cache_line_size set to 64 bytes <6>[ 7.426615] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 7.426872] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 7.426882] e820: reserve RAM buffer [mem 0x67f4e000-0x67ffffff] <7>[ 7.426885] e820: reserve RAM buffer [mem 0x67faf000-0x67ffffff] <7>[ 7.426888] e820: reserve RAM buffer [mem 0x6ca41000-0x6fffffff] <7>[ 7.426891] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 7.426992] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 7.426992] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 7.426992] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 7.426992] vgaarb: loaded <6>[ 7.426992] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 7.426995] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 7.428946] clocksource: Switched to clocksource tsc-early <6>[ 7.429694] pnp: PnP ACPI init <6>[ 7.430429] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 7.430444] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 7.430984] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 7.432320] system 00:03: [io 0x06a4] has been reserved <6>[ 7.432333] system 00:03: [io 0x06a0] has been reserved <6>[ 7.451833] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 7.451852] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.451868] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 7.451881] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 7.451895] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 7.451911] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 7.451926] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 7.451939] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 7.456831] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 7.457953] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 7.461308] pnp: PnP ACPI: found 8 devices <6>[ 7.471598] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 7.471821] NET: Registered PF_INET protocol family <6>[ 7.472113] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.474229] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 7.474486] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 7.474510] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 7.474752] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 7.476679] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 7.477002] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.477666] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 7.478316] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 7.478352] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 7.478368] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 7.478402] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 7.478418] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 7.478428] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 7.478477] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 7.478525] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 7.478575] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 7.478623] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 7.478672] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 7.478722] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 7.478758] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 7.478787] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 7.478802] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 7.478819] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 7.478831] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 7.478842] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.478857] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 7.478866] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 7.478881] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 7.478892] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.478907] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 7.478917] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 7.478925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 7.478935] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 7.478944] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 7.478955] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 7.478964] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 7.478972] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 7.478981] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 7.478992] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 7.478999] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 7.479008] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 7.480144] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 7.481907] PCI: CLS 0 bytes, default 64 <6>[ 7.481981] DMAR: No RMRR found <6>[ 7.481998] DMAR: No ATSR found <6>[ 7.482005] DMAR: IOMMU feature nest inconsistent <6>[ 7.482007] DMAR: IOMMU feature sc_support inconsistent <6>[ 7.482022] DMAR: dmar0: Using Queued invalidation <6>[ 7.482056] DMAR: dmar1: Using Queued invalidation <6>[ 7.483016] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 7.484254] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 7.484315] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 7.484366] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 7.484445] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 7.484530] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 7.484615] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 7.484670] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 7.484723] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 7.484775] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 7.484852] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 7.484895] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 7.484959] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 7.485033] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 7.485076] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 7.485175] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 7.485220] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 7.485264] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 7.485308] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 7.485382] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 7.485434] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 7.485510] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 7.485558] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 7.485669] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 7.485716] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 7.485763] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 7.485816] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 7.485864] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 7.485936] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 7.499551] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 7.499563] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 7.499572] software IO TLB: mapped [mem 0x00000000635c1000-0x00000000675c1000] (64MB) <6>[ 7.499922] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.499935] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.499944] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.499952] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 7.499960] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.501968] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 7.502030] clocksource: Switched to clocksource tsc <6>[ 7.502130] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 7.512688] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 7.514960] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 7.518448] NET: Registered PF_ALG protocol family <6>[ 7.518469] xor: measuring software checksum speed <6>[ 7.518708] prefetch64-sse : 43051 MB/sec <6>[ 7.518954] generic_sse : 41260 MB/sec <6>[ 7.518960] xor: using function: prefetch64-sse (43051 MB/sec) <6>[ 7.519013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 7.519028] io scheduler mq-deadline registered <6>[ 7.519035] io scheduler kyber registered <6>[ 7.520579] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 7.521718] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 7.521864] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.523388] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 7.523517] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 7.524146] efifb: probing for efifb <6>[ 7.524173] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 7.524184] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 7.524193] efifb: scrolling: redraw <6>[ 7.524199] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 7.528359] Console: switching to colour frame buffer device 360x112 <6>[ 7.532249] fb0: EFI VGA frame buffer device <6>[ 7.532967] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 7.533174] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 7.536562] ACPI: button: Lid Switch [LID0] <6>[ 7.536736] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 7.536862] ACPI: button: Sleep Button [SLPB] <6>[ 7.536997] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 7.538490] ACPI: button: Power Button [PWRB] <6>[ 7.614212] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 7.614234] ACPI: thermal: Thermal Zone [TZ00] (40 C) <6>[ 7.614816] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 7.615313] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 7.615700] ACPI: battery: Slot [BAT0] (battery present) <6>[ 7.616055] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 7.616447] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 7.617936] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 7.619180] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 7.620040] Non-volatile memory driver v1.3 <6>[ 7.620167] Linux agpgart interface v0.103 <6>[ 7.652966] ACPI: bus type drm_connector registered <6>[ 7.662960] loop: module loaded <6>[ 7.663691] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 7.663958] nvme nvme0: pci function 0000:01:00.0 <6>[ 7.664368] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.664464] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 7.666202] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.666984] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 7.667009] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 7.667035] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.667263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.667295] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.667317] usb usb1: Product: xHCI Host Controller <6>[ 7.667332] usb usb1: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.667355] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 7.667917] hub 1-0:1.0: USB hub found <6>[ 7.668008] hub 1-0:1.0: 1 port detected <4>[ 7.670247] nvme nvme0: missing or invalid SUBNQN field. <6>[ 7.670461] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.670501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.670532] usb usb2: Product: xHCI Host Controller <6>[ 7.670547] usb usb2: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.670572] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 7.670970] hub 2-0:1.0: USB hub found <6>[ 7.671035] hub 2-0:1.0: 4 ports detected <6>[ 7.675423] nvme nvme0: 15/0/0 default/read/poll queues <6>[ 7.683204] nvme0n1: p1 p2 <6>[ 7.689150] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.689184] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 7.690763] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 7.691370] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 7.691394] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 7.691649] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 7.691783] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 7.691808] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.691830] usb usb3: Product: xHCI Host Controller <6>[ 7.691844] usb usb3: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.691868] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 7.692312] hub 3-0:1.0: USB hub found <6>[ 7.692355] hub 3-0:1.0: 12 ports detected <6>[ 7.714531] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 7.714559] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.714580] usb usb4: Product: xHCI Host Controller <6>[ 7.714595] usb usb4: Manufacturer: Linux 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ xhci-hcd <6>[ 7.714618] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 7.714992] hub 4-0:1.0: USB hub found <6>[ 7.715033] hub 4-0:1.0: 2 ports detected <6>[ 7.718230] usbcore: registered new interface driver usb-storage <6>[ 7.718525] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 7.718546] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 8.420421] i8042: Can't read CTR while initializing i8042 <4>[ 8.420449] i8042: probe of i8042 failed with error -5 <6>[ 8.421584] mousedev: PS/2 mouse device common for all mice <6>[ 8.422243] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 8.423710] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 8.423896] rtc_cmos rtc_cmos: setting system clock to 1998-02-16T17:10:22 UTC (887649022) <6>[ 8.424067] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 8.424580] IR JVC protocol handler initialized <6>[ 8.424772] IR MCE Keyboard/mouse protocol handler initialized <6>[ 8.424973] IR NEC protocol handler initialized <6>[ 8.425163] IR RC5(x/sz) protocol handler initialized <6>[ 8.425354] IR RC6 protocol handler initialized <6>[ 8.425581] IR SANYO protocol handler initialized <6>[ 8.426820] IR Sharp protocol handler initialized <6>[ 8.427899] IR Sony protocol handler initialized <6>[ 8.428892] IR XMP protocol handler initialized <6>[ 8.434515] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 8.435588] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 8.436774] device-mapper: uevent: version 1.0.3 <6>[ 8.438973] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 8.439805] intel_pstate: Intel P-state driver initializing <6>[ 8.444390] intel_pstate: HWP enabled <6>[ 8.445269] sdhci: Secure Digital Host Controller Interface driver <6>[ 8.446082] sdhci: Copyright(c) Pierre Ossman <6>[ 8.457511] pstore: Registered efi_pstore as persistent store backend <6>[ 8.460049] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.464004] usbcore: registered new interface driver usbhid <6>[ 8.466478] usbhid: USB HID core driver <6>[ 8.469802] pci 0000:00:08.0: Setting to D3hot <6>[ 8.484275] pci 0000:00:05.0: Setting to D3hot <6>[ 8.500025] pci 0000:00:0b.0: Setting to D3hot <6>[ 8.516346] pci 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 8.522065] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 8.528581] intel_pmc_core INT33A1:00: initialized <6>[ 8.537550] intel_rapl_msr: PL4 support detected. <6>[ 8.543475] intel_rapl_common: Found RAPL domain package <6>[ 8.548107] intel_rapl_common: Found RAPL domain core <6>[ 8.552863] intel_rapl_common: Found RAPL domain uncore <6>[ 8.558083] intel_rapl_common: Found RAPL domain psys <6>[ 8.573829] Initializing XFRM netlink socket <6>[ 8.579328] NET: Registered PF_INET6 protocol family <6>[ 8.592304] Segment Routing with IPv6 <6>[ 8.597822] In-situ OAM (IOAM) with IPv6 <6>[ 8.603566] mip6: Mobile IPv6 <6>[ 8.608512] NET: Registered PF_PACKET protocol family <6>[ 8.612953] NET: Registered PF_KEY protocol family <6>[ 8.652751] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 8.664409] IPI shorthand broadcast: enabled <6>[ 8.669202] AVX2 version of gcm_enc/dec engaged. <6>[ 8.676752] AES CTR mode by8 optimization enabled <6>[ 8.676898] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 8.690297] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 8.698923] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 8.707541] usb 4-1: Manufacturer: Realtek <6>[ 8.715879] usb 4-1: SerialNumber: 000001 <6>[ 8.802736] sched_clock: Marking stable (8796017028, 6409023)->(8831087539, -28661488) <6>[ 8.809407] registered taskstats version 1 <6>[ 8.925118] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 8.951518] Btrfs loaded, zoned=no, fsverity=no <6>[ 8.956693] pstore: Using crash dump compression: deflate <6>[ 8.980213] clk: Disabling unused clocks <6>[ 8.985175] ALSA device list: <6>[ 8.989818] No soundcards found. <6>[ 8.995790] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 9.178838] EXT4-fs (nvme0n1p2): mounted filesystem 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 ro with ordered data mode. Quota mode: disabled. <6>[ 9.184066] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 9.192761] devtmpfs: mounted <6>[ 9.200737] Freeing unused kernel image (initmem) memory: 2564K <6>[ 9.205334] Write protecting the kernel read-only data: 22528k <6>[ 9.211810] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 9.213887] Run /sbin/init as init process <7>[ 9.218178] with arguments: <7>[ 9.218189] /sbin/init <7>[ 9.218198] 3 <7>[ 9.218207] with environment: <7>[ 9.218216] HOME=/ <7>[ 9.218224] TERM=linux <7>[ 9.218233] BOOT_IMAGE=/boot/drm_intel <7>[ 9.546069] systemd[1]: System time before build time, advancing clock. <7>[ 9.885337] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 9.896022] systemd[1]: Detected architecture x86-64. <7>[ 9.998566] systemd[1]: Set hostname to . <6>[ 10.230313] cat (190) used greatest stack depth: 12696 bytes left <6>[ 10.235569] friendly-recove (187) used greatest stack depth: 12008 bytes left <7>[ 11.221673] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 11.226706] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 11.242912] systemd[1]: Created slice system-modprobe.slice. <7>[ 11.277748] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 11.311498] systemd[1]: Created slice User and Session Slice. <7>[ 11.342767] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 11.372958] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 11.378492] systemd[1]: Reached target Remote File Systems. <7>[ 11.408201] systemd[1]: Reached target Slices. <7>[ 11.439575] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 11.471325] systemd[1]: Listening on Syslog Socket. <7>[ 11.503177] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 11.534225] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 11.606036] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 11.614400] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 11.646734] systemd[1]: Listening on Journal Socket. <7>[ 11.678878] systemd[1]: Listening on udev Control Socket. <7>[ 11.710330] systemd[1]: Listening on udev Kernel Socket. <7>[ 11.771102] systemd[1]: Mounting Huge Pages File System... <7>[ 11.836356] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 11.896625] systemd[1]: Mounting Kernel Debug File System... <7>[ 11.958330] systemd[1]: Mounting Kernel Trace File System... <7>[ 12.027004] systemd[1]: Starting Journal Service... <7>[ 12.078605] systemd[1]: Starting Set the console keyboard layout... <7>[ 12.151236] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 12.175924] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 12.182345] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 12.216668] systemd[1]: Starting File System Check on Root Device... <7>[ 12.283613] systemd[1]: Starting Load Kernel Modules... <7>[ 12.349288] systemd[1]: Starting udev Coldplug all Devices... <7>[ 12.400333] systemd[1]: Starting Uncomplicated firewall... <7>[ 12.435395] systemd[1]: Started Journal Service. <6>[ 13.176151] EXT4-fs (nvme0n1p2): re-mounted 9fe6343d-53a8-4ecc-a3ac-565675bd42c9 r/w. Quota mode: disabled. <6>[ 13.334862] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 13.444915] systemd-journald[213]: Received client request to flush runtime journal. <5>[ 13.463485] systemd-journald[213]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 15.288475] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 15.350264] pps_core: LinuxPPS API ver. 1 registered <6>[ 15.350278] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 15.427911] PTP clock support registered <6>[ 15.432359] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 15.432630] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 15.970883] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 15.970931] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 15.990045] usbcore: registered new device driver r8152-cfgselector <6>[ 16.016684] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 16.017120] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 16.018476] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 16.018486] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 16.026107] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 16.095170] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 16.138029] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 16.210845] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 16.233137] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 16.254667] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 16.255666] usbcore: registered new interface driver r8152 <6>[ 16.273229] usbcore: registered new interface driver cdc_ether <6>[ 16.282326] usbcore: registered new interface driver r8153_ecm <6>[ 16.304778] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 16.305069] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 16.305214] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 16.322792] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 16.518740] r8152 4-1:1.0 enx00e04c6814c9: renamed from eth0 <6>[ 16.537689] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 16.863210] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <4>[ 17.025555] ********************************************************** <4>[ 17.025560] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 17.025565] ** ** <4>[ 17.025569] ** trace_printk() being used. Allocating extra memory. ** <4>[ 17.025573] ** ** <4>[ 17.025577] ** This means that this is a DEBUG kernel and it is ** <4>[ 17.025581] ** unsafe for production use. ** <4>[ 17.025585] ** ** <4>[ 17.025588] ** If you see this message and you are not debugging ** <4>[ 17.025593] ** the kernel, report this immediately to your vendor! ** <4>[ 17.025597] ** ** <4>[ 17.025601] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 17.025604] ********************************************************** <6>[ 17.267495] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <6>[ 17.303063] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 17.307048] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 17.307878] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 17.308732] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 17.308793] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 17.309585] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 17.310530] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 17.311345] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 17.311932] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 17.313051] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 17.313816] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 17.315364] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 17.316234] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 17.318325] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 17.319026] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 17.319660] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 17.321942] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 17.322437] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 17.322961] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 17.323496] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 17.331638] Console: switching to colour dummy device 80x25 <6>[ 17.338227] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 17.338931] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 17.338968] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 17.339755] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 17.340513] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 17.341174] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 17.348630] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0c018 <7>[ 17.349620] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 17.350113] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 17.350680] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 17.351293] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 17.352105] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 17.352954] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 17.353850] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 17.354407] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 17.355037] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 17.355921] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 17.356673] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 17.357346] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 17.358139] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.358854] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.359675] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 17.360314] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.361006] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.361664] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 17.362290] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.363006] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.363871] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 17.364538] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.365186] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.365937] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 17.366658] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.367344] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.368119] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 17.368797] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 17.369521] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 17.372251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 17.373592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 17.374592] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 17.375483] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 17.376218] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 17.376831] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 17.377349] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 17.377864] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 17.378340] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 17.378916] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 17.379434] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 17.379915] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 17.380388] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 17.380898] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 17.381399] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 17.381946] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 17.382485] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 17.383010] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 17.383495] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 17.383976] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 17.384467] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.384938] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 17.385466] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.385951] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 17.386455] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 17.386936] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.387584] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 17.388107] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.388617] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 17.389123] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.389910] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 17.390477] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 17.391002] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 17.391499] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.391996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 17.392617] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 17.393208] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 17.393749] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 17.394356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 17.395375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 17.396228] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 17.397190] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 17.397987] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 17.398904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 17.399476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 17.400109] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 17.400851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 17.401442] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 17.401542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 17.402157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 17.402758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 17.403270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 17.405047] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 17.411314] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7>[ 17.413686] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 17.414474] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 17.415169] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 17.415923] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 17.416623] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 17.417204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 17.417776] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <6>[ 17.427631] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.13) <7>[ 17.515178] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 17.526029] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 17.530984] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 17.531756] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 17.532664] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 17.533577] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 17.534547] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 17.535215] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 17.535939] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 17.536698] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 17.537384] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 17.538197] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 17.539050] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 17.539745] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 17.540385] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 17.541226] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 17.542078] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 17.542855] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 17.543868] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 17.544574] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 17.545144] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 17.545710] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 17.546536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 17.548826] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 17.549669] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 17.553178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 17.554168] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 17.555015] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 17.556265] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 17.559064] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 17.562400] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 17.562913] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 17.573853] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 17.573899] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 17.573911] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 17.574044] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 17.575467] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 17.576789] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 17.577324] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 17.577869] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 17.578575] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 17.579226] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 17.580256] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 17.581324] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 17.582319] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 17.583577] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 17.585680] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 17.586755] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 17.589065] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 17.589916] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 17.591684] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 17.593393] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.594787] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 17.596873] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 17.598069] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 17.599553] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 17.601363] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 17.602387] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 17.603837] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 17.604951] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.606160] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 17.608126] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 17.609121] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 17.610362] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 17.613807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 17.615269] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 17.617824] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 17.619049] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 17.620166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 17.621121] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 17.622061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 17.623065] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 17.624023] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 17.624988] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 17.625935] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 17.626877] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 17.627826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 17.628748] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 17.629649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 17.630520] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 17.631360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 17.632384] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 17.633351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 17.634300] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 17.635248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 17.636212] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 17.637156] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 17.638101] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 17.638975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 17.639869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 17.640834] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 17.641735] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 17.643706] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 17.644713] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 17.645750] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 17.646917] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 17.648035] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 17.649152] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 17.650272] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 17.651391] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 17.652385] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 17.653629] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 17.654831] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 17.656220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 17.657584] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 17.658812] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.660001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.660991] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.661909] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.662904] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 17.664159] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 17.665211] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.666071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.666957] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.667880] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.668998] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 17.670002] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 17.670992] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 17.672143] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 17.673501] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.674713] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.675750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.676513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.677387] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 17.678383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 17.679489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 17.680590] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 17.681678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 17.682600] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 17.684032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 17.685061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 17.686001] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 17.686986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 17.687944] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 17.688896] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 17.689819] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 17.691230] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 17.692163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 17.693038] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 17.693862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 17.694684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 17.695496] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 17.696268] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 17.697441] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 17.698317] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 17.699217] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 17.700107] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 17.700975] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 17.701839] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 17.702696] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 17.703767] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 17.704649] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 17.705489] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 17.706275] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 17.707116] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 17.707970] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 17.708823] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 17.709869] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 17.710715] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 17.711566] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 17.712482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 17.713261] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 17.714106] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 17.714937] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <6>[ 17.715580] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 17.717171] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 17.718280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 17.719281] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 17.720191] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 17.721197] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 17.722186] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 17.723138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 17.724086] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 17.725016] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 17.725973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 17.726923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 17.727880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 17.728874] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.729858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.730712] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.731454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 17.732155] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 17.733066] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 17.733979] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 17.734918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 17.735834] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 17.736760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 17.737632] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 17.738661] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 17.739615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 17.740536] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.741463] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.742560] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.743567] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.744471] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.745324] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 17.746404] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.747368] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.748314] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 17.749237] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 17.750149] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 17.751025] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 17.751910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 17.753232] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 17.754286] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.755285] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.756280] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 17.759184] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 17.760195] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 17.787736] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 17.818359] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 17.819515] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 17.820325] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 17.821645] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 17.821663] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 17.821674] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 17.821732] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 17.826544] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 17.827545] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 17.828407] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 17.833587] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 17.834564] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 17.837609] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 17.838546] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 17.845360] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 17.846592] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 17.847705] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7>[ 17.968293] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 17.969480] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 17.970582] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 17.971721] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 17.972721] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 17.973777] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 17.974896] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 17.976027] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 17.976961] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 17.977930] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 17.978979] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 17.980062] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 17.981129] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 17.982201] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 17.985764] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <7>[ 17.999509] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2200MHz, before = 2200MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 18.002772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 18.007510] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 18.007531] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 18.008859] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 18.035126] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 18.035159] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 18.036403] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 18.036887] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 18.038026] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 18.038439] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 18.039632] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 18.040006] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 18.043104] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 18.043697] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 18.044214] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 18.139703] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 18.140802] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 18.141757] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 18.142572] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 18.143319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 18.144126] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 18.144889] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 18.145636] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 18.146341] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 18.147190] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 18.147952] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 18.148725] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 18.149328] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 18.150019] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 18.150740] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 18.153657] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.8.0 <6>[ 18.153676] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.1 <7>[ 18.170827] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 18.172630] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 18.183610] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 18.185076] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 18.185098] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 18.185556] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 18.196052] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 18.197571] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 18.198560] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 18.199686] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 18.200884] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 18.201855] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 18.202930] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 18.204047] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 18.204958] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 18.206076] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 18.207039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 18.208152] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 18.209206] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 18.210367] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 18.211595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 18.212585] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 18.213582] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 18.214270] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 18.215067] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.215782] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.216374] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.217140] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.217975] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.218686] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.219357] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.220105] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.220844] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.221531] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.222173] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.222860] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.223713] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.224535] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.225188] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.226051] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.227006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.227826] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.228524] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.229091] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.229696] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 18.230254] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.230876] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 18.231527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 18.232198] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 18.232211] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 18.232990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 18.233741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 18.234555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 18.235203] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 18.235897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 18.236678] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 18.237354] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 18.238084] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 18.238809] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 18.239490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 18.240218] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 18.240229] i915 0000:00:02.0: pixelformat: RGB <7>[ 18.240239] i915 0000:00:02.0: colorimetry: sRGB <7>[ 18.240248] i915 0000:00:02.0: bpc: 0 <7>[ 18.240258] i915 0000:00:02.0: dynamic range: VESA range <7>[ 18.240268] i915 0000:00:02.0: content type: Not defined <7>[ 18.240279] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 18.241111] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 18.242018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 18.242812] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.243575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 18.244303] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 18.245170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 18.246038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 18.246876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 18.247828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 18.248596] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 18.249348] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 18.250465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 18.251253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 18.252058] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.253016] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.253938] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.254851] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.255789] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.256731] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 18.257619] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.258511] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.259339] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 18.260234] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 18.261147] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 18.262051] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 18.262934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 18.263824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 18.264909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 18.265987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 18.269949] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 18.479733] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 18.482036] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 18.496966] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 18.497752] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 18.498342] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 18.547963] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 18.550318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 18.553936] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 18.556349] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 18.557472] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 18.558456] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 18.559385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 18.560487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 18.561408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 18.562368] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 18.563297] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 18.564211] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 18.565105] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 18.565964] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 18.566914] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 18.567897] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 18.568790] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 18.569636] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 18.570460] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 18.571241] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 18.572087] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 18.572924] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 18.573779] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 18.574597] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 18.575367] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 18.576282] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 18.577587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 18.579959] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 18.581036] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 18.582036] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <6>[ 19.016143] r8152 4-1:1.0 enx00e04c6814c9: carrier on <7>[ 19.208843] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 19.210263] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 19.211647] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 19.212996] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 19.413140] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 19.417065] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 19.418525] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 19.423124] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 19.423902] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 19.425506] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 19.427308] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 19.428183] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 19.430582] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 19.431033] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 19.433660] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 19.434148] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 19.435238] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 19.436052] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 19.436485] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 19.437194] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 19.447217] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 19.449494] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.451393] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 19.456481] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 19.457718] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 19.458839] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 19.459715] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 19.460550] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 19.461593] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 19.462617] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 19.463609] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 19.464606] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 19.465635] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 19.466716] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 19.467814] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 19.470171] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 19.473724] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 19.474516] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 19.475058] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 19.475547] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 19.475997] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 19.476555] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 19.480116] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 19.480879] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 19.481274] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 19.481654] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 19.482017] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 19.482379] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 19.506218] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 19.507532] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 19.511464] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 19.512852] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 19.516865] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 19.518577] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 19.519672] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 19.522147] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 19.523272] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 19.524205] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 19.526587] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 19.527755] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 19.529989] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 19.530153] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 19.537684] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 19.583139] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 19.594839] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 19.603486] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 19.604507] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 19.605209] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 19.607262] [drm:drm_client_modeset_probe] <7>[ 19.608313] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 19.608918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 19.609077] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 19.609097] i915 device info: graphics version: 12.71 <7>[ 19.609105] i915 device info: media version: 13 <7>[ 19.609111] i915 device info: display version: 14 <7>[ 19.609118] i915 device info: graphics stepping: B0 <7>[ 19.609124] i915 device info: media stepping: C0 <7>[ 19.609130] i915 device info: display stepping: C0 <7>[ 19.609135] i915 device info: base die stepping: ** <7>[ 19.609141] i915 device info: gt: 0 <7>[ 19.609146] i915 device info: memory-regions: 0x41 <7>[ 19.609152] i915 device info: page-sizes: 0x211000 <7>[ 19.609159] i915 device info: platform: METEORLAKE <7>[ 19.609164] i915 device info: ppgtt-size: 48 <7>[ 19.609170] i915 device info: ppgtt-type: 2 <7>[ 19.609175] i915 device info: dma_mask_size: 46 <7>[ 19.609181] i915 device info: is_mobile: no <7>[ 19.609186] i915 device info: is_lp: no <7>[ 19.609192] i915 device info: require_force_probe: yes <7>[ 19.609198] i915 device info: is_dgfx: no <7>[ 19.609203] i915 device info: has_64bit_reloc: yes <7>[ 19.609208] i915 device info: has_64k_pages: no <7>[ 19.609214] i915 device info: gpu_reset_clobbers_display: no <7>[ 19.609219] i915 device info: has_reset_engine: yes <7>[ 19.609224] i915 device info: has_3d_pipeline: yes <7>[ 19.609229] i915 device info: has_4tile: yes <7>[ 19.609235] i915 device info: has_flat_ccs: no <7>[ 19.609240] i915 device info: has_global_mocs: yes <7>[ 19.609245] i915 device info: has_gmd_id: yes <7>[ 19.609250] i915 device info: has_gt_uc: yes <7>[ 19.609255] i915 device info: has_heci_pxp: no <7>[ 19.609261] i915 device info: has_heci_gscfi: no <7>[ 19.609266] i915 device info: has_guc_deprivilege: yes <7>[ 19.609271] i915 device info: has_l3_ccs_read: no <7>[ 19.609276] i915 device info: has_l3_dpf: no <7>[ 19.609281] i915 device info: has_llc: no <7>[ 19.609287] i915 device info: has_logical_ring_contexts: yes <7>[ 19.609292] i915 device info: has_logical_ring_elsq: yes <7>[ 19.609298] i915 device info: has_media_ratio_mode: no <7>[ 19.609303] i915 device info: has_mslice_steering: no <7>[ 19.609308] i915 device info: has_oa_bpc_reporting: yes <7>[ 19.609313] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 19.609318] i915 device info: has_oam: yes <7>[ 19.609323] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 19.609329] i915 device info: has_pxp: yes <7>[ 19.609333] i915 device info: has_rc6: yes <7>[ 19.609338] i915 device info: has_rc6p: no <7>[ 19.609343] i915 device info: has_rps: yes <7>[ 19.609348] i915 device info: has_runtime_pm: yes <7>[ 19.609353] i915 device info: has_snoop: yes <7>[ 19.609358] i915 device info: has_coherent_ggtt: no <7>[ 19.609363] i915 device info: tuning_thread_rr_after_dep: no <7>[ 19.609368] i915 device info: unfenced_needs_alignment: no <7>[ 19.609374] i915 device info: hws_needs_physical: no <7>[ 19.609379] i915 device info: has_pooled_eu: no <7>[ 19.609384] i915 device info: cursor_needs_physical: no <7>[ 19.609389] i915 device info: has_cdclk_crawl: yes <7>[ 19.609394] i915 device info: has_cdclk_squash: yes <7>[ 19.609398] i915 device info: has_ddi: yes <7>[ 19.609403] i915 device info: has_dp_mst: yes <7>[ 19.609408] i915 device info: has_dsb: yes <7>[ 19.609448] i915 device info: has_fpga_dbg: yes <7>[ 19.609454] i915 device info: has_gmch: no <7>[ 19.609459] i915 device info: has_hotplug: yes <7>[ 19.609464] i915 device info: has_hti: no <7>[ 19.609469] i915 device info: has_ipc: yes <7>[ 19.609474] i915 device info: has_overlay: no <7>[ 19.609479] i915 device info: has_psr: yes <7>[ 19.609486] i915 device info: has_psr_hw_tracking: no <7>[ 19.609492] i915 device info: overlay_needs_physical: no <7>[ 19.609498] i915 device info: supports_tv: no <7>[ 19.609505] i915 device info: has_hdcp: yes <7>[ 19.609512] i915 device info: has_dmc: yes <7>[ 19.609519] i915 device info: has_dsc: yes <7>[ 19.609525] i915 device info: rawclk rate: 38400 kHz <7>[ 19.609535] i915 device info: iommu: enabled <7>[ 19.609544] i915 device info: available engines: 400003 <7>[ 19.609554] i915 device info: subslice total: 8 <7>[ 19.609562] i915 device info: geometry dss mask=00000000,000000ff <7>[ 19.609573] i915 device info: compute dss mask=00000000,000000ff <7>[ 19.609580] i915 device info: EU total: 128 <7>[ 19.609587] i915 device info: EU per subslice: 16 <7>[ 19.609594] i915 device info: has slice power gating: no <7>[ 19.609601] i915 device info: has subslice power gating: no <7>[ 19.609609] i915 device info: has EU power gating: no <7>[ 19.609618] i915 device info: available engines: 41400 <7>[ 19.609625] i915 device info: subslice total: 8 <7>[ 19.609632] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 19.609639] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 19.609645] i915 device info: EU total: 128 <7>[ 19.609652] i915 device info: EU per subslice: 16 <7>[ 19.609659] i915 device info: has slice power gating: no <7>[ 19.609107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.609672] i915 device info: has subslice power gating: no <7>[ 19.609677] i915 device info: has EU power gating: no <6>[ 19.609685] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 19.609692] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 19.609698] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 19.614392] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.615197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 19.616618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 19.617087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 19.617523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 19.617928] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 19.618843] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.618876] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.618896] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.619033] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 19.619851] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 19.622185] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.622749] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 19.624194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 19.624968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 19.625682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 19.626560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 19.629007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 19.630543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 19.630856] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.630910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 19.631016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 19.632950] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 19.633080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 19.633173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.633263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.634405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 19.634561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 19.634649] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 19.634734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 19.636625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 19.636744] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 19.636830] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.636914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.638480] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 19.638627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 19.638732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 19.638833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 19.640222] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 19.640363] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 19.640527] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 19.640632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 19.641947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 19.642060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 19.642140] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 19.642165] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 19.642181] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 19.642196] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 19.642211] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 19.642227] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 19.642242] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 19.642781] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 19.642892] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 19.642914] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 19.642932] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 19.642948] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 19.643015] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 19.643372] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 19.643709] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 19.663010] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 19.667120] fbcon: i915drmfb (fb0) is primary device <7>[ 19.672229] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 19.673553] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 19.674617] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 19.675578] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 19.676350] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 19.677339] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 19.678362] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 19.679605] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 19.680523] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 19.681294] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 19.682289] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 19.683240] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 19.684044] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 19.685099] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 19.685963] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 19.686789] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 19.687652] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 19.688676] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 19.689611] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 19.690598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 19.691352] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 19.692196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 19.693165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 19.693984] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 19.694783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 19.695638] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 19.696525] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 19.697245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 19.698165] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 19.699031] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 19.699043] i915 0000:00:02.0: pixelformat: RGB <7>[ 19.699051] i915 0000:00:02.0: colorimetry: sRGB <7>[ 19.699058] i915 0000:00:02.0: bpc: 0 <7>[ 19.699065] i915 0000:00:02.0: dynamic range: VESA range <7>[ 19.699073] i915 0000:00:02.0: content type: Not defined <7>[ 19.699081] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 19.699862] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.700741] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.701552] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 19.702358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 19.703309] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 19.704300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 19.705248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 19.706202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 19.707385] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 19.708355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 19.709453] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 19.710506] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 19.711365] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 19.712313] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 19.713289] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.714294] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.715463] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.716290] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 19.717352] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 19.718474] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.719315] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.720452] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 19.720998] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 19.721551] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 19.721958] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 19.722360] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 19.722903] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 19.723453] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 19.723985] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 19.724636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 19.725252] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 19.727658] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 19.728715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 19.729633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 19.730708] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 19.731868] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 19.733043] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 19.734196] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 19.735378] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 19.736532] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 19.737587] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 19.738633] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 19.739680] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 19.740735] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 19.741786] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 19.742866] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 19.743916] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 19.744970] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 19.745996] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 19.747039] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 19.748056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 19.749112] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 19.750161] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 19.751228] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 19.758291] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 19.763917] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.764484] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 19.767671] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 19.768925] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 19.770122] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 19.771279] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 19.772467] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 19.773543] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 19.774600] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 19.775655] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 19.776689] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 19.777696] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 19.778770] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 19.784238] Console: switching to colour frame buffer device 360x112 <6>[ 19.819323] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 19.825880] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 19.826010] [drm:drm_client_modeset_probe] <7>[ 19.826849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 19.826952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.830126] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.830676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 19.831873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 19.832738] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 19.837049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 19.837616] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 19.838109] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 19.838549] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 19.839511] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.839529] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.839539] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.839609] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 19.839971] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 19.841954] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.842332] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 19.843807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 19.843870] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.843886] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 19.843931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 19.844748] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 19.844793] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.844849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.845548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 19.845604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 19.845643] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 19.846307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 19.846350] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.846390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.846936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 19.846974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 19.847008] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 19.847491] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 19.847527] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 19.847557] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 19.847991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 19.848023] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 19.848031] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 19.848036] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 19.848039] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 19.848043] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 19.848047] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 19.848050] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 19.848245] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 19.848284] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 19.848290] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 19.848295] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 19.848299] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 19.848364] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 19.870245] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 19.870409] [drm:drm_client_modeset_probe] <7>[ 19.870828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 19.870936] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 19.873089] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.873548] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 19.874877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 19.875269] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 19.875660] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 19.876006] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 19.876545] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 19.876562] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 19.876573] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 19.876627] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 19.877132] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 19.879023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 19.879402] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 19.880923] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 19.880975] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 19.880994] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 19.881041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 19.881499] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 19.881536] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.881570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 19.881975] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 19.882009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 19.882040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 19.882541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 19.882579] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.882613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 19.883209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 19.883260] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 19.883310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 19.884113] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 19.884173] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 19.884230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 19.885059] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 19.885119] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 19.885131] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 19.885139] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 19.885146] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 19.885153] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 19.885160] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 19.885167] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 19.885295] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 19.885336] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 19.885345] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 19.885353] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 19.885361] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 19.885453] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 19.922229] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.923380] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.924471] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.925370] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 19.926206] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.927157] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.928151] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.929491] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 19.930717] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.931548] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.932468] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.933210] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 19.934156] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.935050] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.935845] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.936749] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 19.937666] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.938575] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.939507] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.940367] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 19.941324] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.942332] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.943184] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.944075] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 19.944994] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.945763] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.946547] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.947175] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 19.947849] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.948503] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.949081] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.949683] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 19.950300] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.950986] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.951694] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 19.952380] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 19.969257] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 19.975881] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 19.980657] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 19.983399] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 20.017203] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 20.017940] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 22.920984] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 22.922259] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 23.565188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 23.567039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 23.568476] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 23.569664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 24.269400] systemd-udevd (291) used greatest stack depth: 11784 bytes left <6>[ 24.300178] systemd-udevd (271) used greatest stack depth: 11216 bytes left <7>[ 25.392221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 25.393926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 25.401755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 25.403122] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 25.404532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 38.970515] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=673 'systemd' <5>[ 39.429064] systemd-journald[213]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 39.503822] systemd-journald[213]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 40.379963] fuse: init (API version 7.38)