igt@i915_pm_rpm@basic-rte on fi-tgl-1115g4@linus-v6.5-rc4 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out	Starting subtest: basic-rte Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5a/0x1a0 __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x1f/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x92/0xc0 Subtest basic-rte: SUCCESS (6.476s) i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 2 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x92/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1e9/0x740 drm_ioctl_kernel+0xb4/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x79/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5a/0x1a0 __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 2 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x7d/0x120 [snd_hda_core] __azx_runtime_resume+0x18/0xe0 [snd_hda_intel] azx_runtime_resume+0x3c/0xd0 [snd_hda_intel] __rpm_callback+0x3c/0x110 rpm_callback+0x58/0x70 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] i915_audio_component_codec_wake_override+0x39/0xf0 [i915] snd_hdac_set_codec_wakeup+0x31/0x90 [snd_hda_core] snd_hdac_display_power+0x90/0x120 [snd_hda_core] __azx_runtime_resume+0x18/0xe0 [snd_hda_intel] azx_runtime_resume+0x3c/0xd0 [snd_hda_intel]
Err	Starting subtest: basic-rte Subtest basic-rte: SUCCESS (6.476s)
Dmesg	<6> [121.512268] Console: switching to colour dummy device 80x25 <6> [121.512559] [IGT] i915_pm_rpm: executing <6> [121.523962] [IGT] i915_pm_rpm: starting subtest basic-rte <7> [121.524015] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [121.524508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] <7> [121.524533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [121.551221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [121.551236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [121.551260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [121.551265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [121.551269] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [121.551273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [121.551278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [121.551282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [121.551702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [121.551901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [121.552488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [121.552748] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [121.553766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [121.553785] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [121.553792] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553796] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553800] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553804] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553808] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553813] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553816] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553820] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.553825] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [121.553829] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [121.553834] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [121.553838] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [121.553843] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [121.553848] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [121.553852] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [121.553857] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [121.553861] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [121.553865] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [121.553869] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [121.553874] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [121.553879] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [121.553883] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [121.553888] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [121.553892] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [121.553896] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [121.553901] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [121.553906] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [121.553910] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [121.553915] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [121.553919] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.553924] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.553929] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [121.553932] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.553936] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.553940] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.553944] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.553947] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.553952] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.553956] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [121.553961] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [121.553966] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [121.553970] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [121.553975] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [121.553979] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [121.553984] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [121.553989] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [121.553993] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [121.553998] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [121.554003] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [121.554008] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [121.554012] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [121.554016] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [121.554021] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [121.554025] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [121.554029] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [121.554034] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [121.554038] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [121.554042] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [121.554047] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [121.554051] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [121.554056] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [121.554060] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [121.554065] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [121.554069] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [121.554073] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [121.554078] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [121.554083] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [121.554087] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [121.554092] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [121.554096] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [121.554101] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [121.554104] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [121.554330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [121.554349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [121.554529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.554709] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.554936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.555111] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.555322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [121.555477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [121.555493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [121.555719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.555895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.556119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.556321] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.556486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [121.556617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [121.556634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [121.556798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.556972] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.557192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.557389] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.557557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [121.557688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [121.557705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [121.557867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.558041] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.558260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.558492] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.558668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [121.574883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [121.574906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [121.575101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.575310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.575546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.575722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.575897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [121.576764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [121.576777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [121.576893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.577022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.577201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.577363] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.577481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [121.578132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [121.578150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [121.578357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.578514] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.578677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.578802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.578918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [121.579442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [121.579454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [121.579571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.579746] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.579968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.580139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.580305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [121.581010] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] <7> [121.581028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [121.607699] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [121.607709] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [121.607712] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [121.607715] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [121.607718] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [121.607721] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [121.607724] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [121.607727] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [121.608091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [121.608207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [121.608710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [121.608853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [121.609516] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes : <7> [121.609530] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [121.609536] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609539] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609541] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609544] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609546] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609549] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609551] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609554] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 <7> [121.609557] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 <7> [121.609559] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [121.609562] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5 <7> [121.609564] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa <7> [121.609567] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6 <7> [121.609569] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6 <7> [121.609572] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa <7> [121.609574] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6 <7> [121.609577] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [121.609580] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5 <7> [121.609582] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6 <7> [121.609585] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6 <7> [121.609587] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa <7> [121.609590] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6 <7> [121.609592] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6 <7> [121.609595] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6 <7> [121.609597] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6 <7> [121.609600] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5 <7> [121.609602] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa <7> [121.609605] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6 <7> [121.609607] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6 <7> [121.609610] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.609613] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.609615] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6 <7> [121.609618] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.609620] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [121.609623] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.609625] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.609628] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.609630] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 <7> [121.609633] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6 <7> [121.609636] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 <7> [121.609638] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6 <7> [121.609641] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6 <7> [121.609643] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6 <7> [121.609646] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [121.609648] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [121.609651] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [121.609654] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6 <7> [121.609656] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6 <7> [121.609659] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [121.609661] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6 <7> [121.609664] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5 <7> [121.609666] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6 <7> [121.609669] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6 <7> [121.609672] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 <7> [121.609674] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6 <7> [121.609677] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6 <7> [121.609679] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [121.609682] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 <7> [121.609684] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa <7> [121.609687] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [121.609689] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6 <7> [121.609692] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa <7> [121.609694] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 <7> [121.609697] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 <7> [121.609699] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [121.609702] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [121.609705] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [121.609707] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa <7> [121.609710] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa <7> [121.609712] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa <7> [121.609715] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [121.609717] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 <7> [121.609768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] <7> [121.609780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [121.609903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.610034] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.610204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.610353] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.610495] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected <7> [121.610534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] <7> [121.610551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [121.610720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.610853] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.611021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.611147] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.611284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected <7> [121.611316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] <7> [121.611333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [121.611464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.611589] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.611755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.611877] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.611992] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected <7> [121.612015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] <7> [121.612026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [121.612138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [121.612282] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [121.612483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [121.612610] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [121.612768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected <7> [121.612999] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:354] <6> [121.637071] ahci 0000:00:17.0: port does not support device sleep <7> [122.637033] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [122.637353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [122.637833] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [122.638283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [122.638721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [122.639135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [122.639630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [122.640112] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [122.640520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [122.640965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [122.641371] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [122.641740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [122.641973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [122.642102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [122.642219] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [122.642382] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [122.642516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [122.642636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [122.642753] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [122.642867] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [122.642985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [122.643102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [122.643224] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [122.643359] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [122.643486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [122.643632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [122.643749] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [122.643865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [122.643978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [122.644094] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [122.644213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [122.644375] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [122.644492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [122.644607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [122.644721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [122.644836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [122.644957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [122.645081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [122.645197] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [122.645199] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [122.645200] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [122.645202] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [122.645204] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [122.645205] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [122.645207] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [122.645208] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [122.645210] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [122.645343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [122.645486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [122.645605] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [122.645719] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000) <7> [122.645832] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [122.645947] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [122.646063] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [122.646066] i915 0000:00:02.0: colorspace: RGB <7> [122.646067] i915 0000:00:02.0: scan mode: Underscan <7> [122.646069] i915 0000:00:02.0: colorimetry: No Data <7> [122.646070] i915 0000:00:02.0: picture aspect: No Data <7> [122.646072] i915 0000:00:02.0: active aspect: Same as Picture <7> [122.646073] i915 0000:00:02.0: itc: No Data <7> [122.646075] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [122.646076] i915 0000:00:02.0: quantization range: Full <7> [122.646078] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [122.646079] i915 0000:00:02.0: video code: 0 <7> [122.646081] i915 0000:00:02.0: ycc quantization range: Full <7> [122.646082] i915 0000:00:02.0: hdmi content type: Graphics <7> [122.646084] i915 0000:00:02.0: pixel repeat: 0 <7> [122.646085] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [122.646087] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [122.646204] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [122.646337] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [122.646477] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [122.646479] i915 0000:00:02.0: vendor: Intel <7> [122.646480] i915 0000:00:02.0: product: Integrated gfx <7> [122.646482] i915 0000:00:02.0: source device information: PC General (0x9) <7> [122.646483] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [122.646598] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [122.646712] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [122.646822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [122.646824] i915 0000:00:02.0: empty frame <7> [122.646825] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [122.646943] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [122.647060] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [122.647208] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [122.647338] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [122.647516] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [122.647625] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [122.647729] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [122.647835] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [122.647942] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [122.648048] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [122.648178] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [122.648320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [122.648458] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [122.648575] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [122.648692] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [122.648816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [122.648932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [122.649059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [122.649179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [122.649313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [122.649448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [122.649564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [122.649677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [122.649791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [122.657167] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A] <7> [122.673815] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [122.673970] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [122.674801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [122.674955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [122.675462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [122.675612] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [122.675628] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [122.675823] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [122.682272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [122.682488] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [122.682680] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [122.682861] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [122.683034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [122.683385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [122.683577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [122.683740] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [122.683899] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [122.684057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [122.684174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [122.684393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [122.684508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [122.684619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [122.684764] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [122.684896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [122.685006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [122.685113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [122.685219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [122.685355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [122.685495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [122.685612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [122.685723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [122.685835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [122.685944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [122.686054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [122.686165] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [122.686306] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [122.686451] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [122.686572] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [122.686691] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [122.686810] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [122.686926] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [122.687045] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [122.687164] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [122.687337] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [122.687497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [122.687648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [122.687803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [122.687936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [122.688085] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [122.688322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [122.688456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [122.688574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [122.689838] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [122.689995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [122.690797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [122.691932] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.692121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [122.692319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.692498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [122.692679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [122.692853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [122.693018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [122.694262] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [122.694412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [122.695289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [122.696416] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.696631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [122.696811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.696998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [122.697179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [122.697373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [122.697539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [122.698776] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [122.698921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [122.699809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [122.700943] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.701136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [122.701335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.701522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [122.701704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [122.701871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [122.702036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [122.717915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [122.718595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [122.719708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.719847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [122.720000] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.720155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [122.720287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [122.720409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [122.720546] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [122.732859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [122.733018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [122.733145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [122.733300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [122.733443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [122.896433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [122.896612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [122.900649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [122.901813] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.902106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [122.902412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.902695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [122.903016] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [122.903471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [122.903854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [122.904229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [122.904583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [122.904944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.004975] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [123.017471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.017679] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.018033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.018525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.019414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.019999] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.020550] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.021136] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.022970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.023350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.047801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.047976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.048142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.048864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.050006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.050156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.050302] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.050448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.050573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.050692] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.050808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.051941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.052129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.054227] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [123.060746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.061865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.062020] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.062151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.062297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.062464] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.062660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.062822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.062983] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.063101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.063263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.087923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.088062] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.088312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.088623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.089269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.089613] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.089895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.090346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.091801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.092148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.116599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.116722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.116844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.117708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.118835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.118984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.119117] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.119268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.119407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.119544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.119682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.121909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.122077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.125605] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [123.125737] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [123.130708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.131942] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.132103] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.132235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.132388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.132568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.132791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.132953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.133140] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.133275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.133450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.158149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.158281] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.158427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.158591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.159083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.159472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.159814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.160268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.161793] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.162053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.179817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.179908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.259429] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [123.259440] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [123.259443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [123.259446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [123.259450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [123.259453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [123.259457] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [123.259461] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [123.261665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [123.261839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [123.264485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [123.264639] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [123.264663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.264844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.268758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.269870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.270024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.270158] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.270299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.270509] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.271195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.271386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.271567] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.271691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.271839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.271933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [123.295936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.296033] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.296161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.296351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.296851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.297178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.297520] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.297921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.299162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.299396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.322560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.322696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.322817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.323659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.324811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.324952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.325085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.325258] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.325412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.325535] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.325652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.326781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.326965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.328045] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [123.335588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.336698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.336854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.336991] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.337122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.337298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.337539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.337701] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.337865] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.337986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.338134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.362941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.363079] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.363330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.363640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.364328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.364685] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.364978] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.365407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.366809] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.367178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.391654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.391776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.391901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [123.392858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.393888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.394041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.394204] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.394386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.394538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [123.394662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.394797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.397026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.397178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.398331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [123.405842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.407048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.407210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.407386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.407526] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.407687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.408094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.408291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.408481] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.408600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.408748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.432812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.432915] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.433043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.433191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.433704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.433952] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.434131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.434464] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.435529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.435871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.456983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.457121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.457320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.457502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.458280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.458459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.458624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.458824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.463944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.464993] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.465185] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.465385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.465569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.465784] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.466017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [123.466049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [123.466255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.466475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.466697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.466868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.467068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.490743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.490844] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.490971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.491119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.491624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.491872] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.492050] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.492372] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.493169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.493357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.516511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.516642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.516821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.516999] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.518826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.519015] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.519179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.519396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.522301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.523369] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.523560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.523744] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.523926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.524139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.524382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [123.524435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.524653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.524873] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.525042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.525257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.525407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [123.549913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.550028] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.550193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.550437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.551007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.551276] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.551452] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.551734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.552549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.552720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.570383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.570517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.570696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.570878] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.572712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.572887] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.573055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.573263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.578319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.579429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.579619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.579802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.579986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.580195] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.580439] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [123.580470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [123.580657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.580875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.581093] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.581272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.581477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.605725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.605841] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.606009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.606160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.606653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.606897] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.607072] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.607344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.608148] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.608329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.623791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.623925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.624100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.624309] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.625077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.625262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.625428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.625634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.629641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.630706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.630902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.631085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.631278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.631492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.631730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [123.631772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [123.631962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.632179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.632416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.632588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.632793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.657464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.657565] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.657691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.657841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.658302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.658536] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.658711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.659033] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.659848] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.660018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.679883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.679976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.765612] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [123.765622] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [123.765626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [123.765629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [123.765632] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [123.765636] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [123.765639] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [123.765642] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [123.767942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [123.768110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [123.770607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [123.770760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [123.770785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.770961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.774874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.775987] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.776145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.776287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.776456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.776667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.776902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [123.776957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.777171] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.777350] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.777482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.777631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.777728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [123.801825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.801923] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.802050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.802198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.802703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.803071] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.803381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.803773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.804937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.805169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.823953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.824039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.824166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.824323] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.826190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.826382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.826549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.826700] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.830619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.831728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.831919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.832102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.832297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.832496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.832670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [123.832712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.832872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.833035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.833187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.833406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.833506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [123.857913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.858027] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.858189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.858407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.859080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.859935] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.860216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.860730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.862057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.862292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.882202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.882301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.882424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.882553] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.884430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.884597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.884731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.884868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.893208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.894288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [123.894315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [123.894511] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.894700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.894838] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.894966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.895118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.895403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.895587] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.895751] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.895870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.896017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.919906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.920010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.920156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.920345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.920893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.921378] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.921751] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.922143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.923630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.923823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [123.948092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [123.948221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [123.948415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [123.948564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [123.949284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [123.949427] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [123.949546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [123.949684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [123.953669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [123.954742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.954933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [123.955122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.955309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [123.955514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [123.955700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [123.955722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [123.955851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [123.956011] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [123.956176] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [123.956313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [123.956461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [123.980808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [123.980965] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [123.981201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [123.981519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [123.982236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [123.983034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [123.983298] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [123.983655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [123.984872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [123.985050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.009315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.009444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.009622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.009770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.010489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.010640] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.010757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.010893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.018165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.019225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.019384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.019540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.019671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.019822] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.020007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [124.020043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [124.020198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.020378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.020555] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.020674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.020823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.044694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.044841] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.045057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.045345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.045947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.046215] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.046458] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.046811] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.047981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.048223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.070355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.070462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.150961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [124.150971] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [124.150974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [124.150977] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [124.150981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [124.150984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [124.150987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [124.150991] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [124.151626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.151776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [124.152880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.152992] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [124.153008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.153143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.161489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.162570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [124.162596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [124.162743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.162880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.163012] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.163140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.163305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.163551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.163713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.163877] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.163994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.164148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.188794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.188925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.189118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.189384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.189963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.190208] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.190430] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.190756] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.191829] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.192055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.210860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.210951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.211077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.211203] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.212022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.212159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.212292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.212438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.220768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.221846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [124.221872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [124.222066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.222261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.222401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.222532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.222681] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.222901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.223066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.223229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.223370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.223530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.248206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.248380] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.248568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.248775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.249308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.249618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.249866] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.250227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.251347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.251565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.272560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.272687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.272866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.273025] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.274795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.274919] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.275036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.275170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.282485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.283610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.283799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.283981] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.284156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.284294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [124.284317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [124.284460] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.284691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.284894] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.285068] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.285187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.285355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.309951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.310051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.310189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.310388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.310917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.311178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.311374] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.311630] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.312368] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.312495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.333478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.333596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.333750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.333880] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.335709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.335847] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.335965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.336102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.344497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.345564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [124.345590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [124.345781] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.345921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.346051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.346181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.346358] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.346603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.346762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.346924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.347039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.347186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.371132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.371276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.371480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.371664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.372321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.372532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.372680] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.372996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.374181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.374429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.398721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.398855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.399035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.399194] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.399924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.400051] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.400166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.400323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.405365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.406492] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.406684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.406870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.407031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.407183] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.407372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [124.407413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [124.407545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.407713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.407874] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.407994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.408143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.431876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.431999] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.432179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.432424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.433020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.433348] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.433547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.433816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.434812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.435019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.451592] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.451689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.532910] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [124.532921] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [124.532924] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [124.532928] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [124.532931] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [124.532934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [124.532938] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [124.532941] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [124.535237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.535417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [124.537907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.538057] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [124.538083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.538233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.542973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.544081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.544279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.544463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.544645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.544824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.545012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [124.545033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [124.545168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.545345] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.545546] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.545667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.545814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.569714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.569813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.569948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.570099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.570745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.571041] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.571288] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.571689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.572895] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.573134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.594177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.594295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.594421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.594548] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.595350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.595524] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.595691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.595883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.604237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.605344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.605490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.605624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.605753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.605902] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.606094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.606264] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.606454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.606573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.606719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.606810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [124.606828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [124.630721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.630823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.630957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.631115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.631620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.631813] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.631942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.632182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.633166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.633404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.653317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.653418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.653544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.653674] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.654477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.654629] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.654747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.654882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.663225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.664305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [124.664331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [124.664478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.664615] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.664748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.664876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.665026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.665214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.665393] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.665571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.665695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.665841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.689822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.689940] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.690108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.690333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.690962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.691441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.691724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.692087] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.693619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.693831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.718118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.718256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.718426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.718555] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.719291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.719419] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.719536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.719672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.724779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.725844] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.726035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.726224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.726428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.726630] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.726827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.726986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.727147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.727292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.727459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.727554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [124.727573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [124.750812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.750919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.751062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.751223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.751811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.752074] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.752273] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.752527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.753618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.753829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.773745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.773829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.773955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.774083] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.774915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.775043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.775204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.775446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.783802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.784880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [124.784922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [124.785088] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.785224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.785377] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.785520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.785669] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.785866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.786025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.786189] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.786318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.786489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.811111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.811209] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.811369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.811564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.812089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.812321] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.812453] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.812690] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.813933] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.814174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.835258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.835351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.914021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [124.914031] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [124.914035] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [124.914038] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [124.914041] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [124.914045] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [124.914048] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [124.914051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [124.916653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.916825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [124.919467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [124.919617] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [124.919641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.919780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.922223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.923295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.923448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.923582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.923711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.923859] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.924036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [124.924079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.924252] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.924448] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.924563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.924745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [124.924863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [124.948780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [124.948903] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [124.949083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [124.949331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [124.950046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [124.950351] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [124.950593] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [124.950901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [124.952160] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [124.952393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [124.976678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [124.976813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [124.976988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [124.977115] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [124.977849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [124.977991] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [124.978107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [124.978253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [124.985486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [124.986596] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.986758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [124.986893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.987025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [124.987174] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [124.987307] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [124.987334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [124.987560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [124.987721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [124.987882] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [124.988011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [124.988158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.012801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.012988] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.013335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.013717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.014398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.014844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.015214] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.015737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.016983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.017302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.039420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.039552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.039732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.039908] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.040640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.040781] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.040895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.041032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.049370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.050465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [125.050491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [125.050687] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.050877] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.051020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.051149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.051323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.051560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.051719] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.051878] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.051995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.052141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.075795] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.075916] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.076089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.076322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.076941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.077356] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.077637] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.077946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.079143] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.079376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.103656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.103787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.103955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.104086] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.104821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.104968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.105084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.105223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.112714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.113820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.113987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.114122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.114253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [125.114274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [125.114421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.114572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.114798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.114958] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.115120] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.115264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.115438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.140067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.140165] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.140325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.140513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.140983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.141474] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.141755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.142144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.143711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.143923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.164928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.165028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.165154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.165302] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.166070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.166194] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.166357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.166513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.173733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.174847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.174993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.175125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.175272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.175425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.175594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [125.175622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [125.175752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.175914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.176075] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.176191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.176355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.201012] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.201137] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.201356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.201615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.202126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.202395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.202569] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.202869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.203815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.204039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.225068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.225157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.302419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [125.302430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [125.302434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [125.302437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [125.302441] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [125.302444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [125.302447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [125.302450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [125.304746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [125.304914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [125.307633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [125.307779] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [125.307804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.307989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.311905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.313015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.313153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.313307] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.313441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.313592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.313764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [125.313806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.313968] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.314146] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.314329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.314529] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.314678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [125.339142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.339274] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.339425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.339594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.340131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.340450] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.340753] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.341180] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.342468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.342684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.363653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.363739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.363863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.363992] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.364813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.364967] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.365083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.365219] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.372465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.373578] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.373767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.373949] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.374081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.374231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.374367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [125.374390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [125.374584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.374743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.374906] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.375023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.375170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.399772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.399879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.400031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.400201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.400727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.401002] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.401201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.401490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.402262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.402413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.423393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.423526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.423707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.423876] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.424607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.424767] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.424885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.425023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.430040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.431151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.431321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.431451] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.431579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.431727] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.431904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [125.431926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [125.432071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.432235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.432424] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.432568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.432731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.457387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.457484] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.457613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.457772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.458442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.458653] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.458776] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.459008] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.459724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.459842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.484076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.484194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.484352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.484501] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.485224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.485386] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.485539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.485736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.494089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.495188] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.495328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [125.495348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [125.495481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.495617] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.495749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.495898] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.496140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.496314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.496486] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.496604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.496751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.521451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.521549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.521678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.521827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.522548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.523025] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.523450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.523977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.525359] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.525560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.544354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.544453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.544581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.544709] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.545534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.545711] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.545877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.546070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.554418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.555511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [125.555547] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [125.555714] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.555852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.555983] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.556111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.556284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.556514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.556675] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.556841] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.556962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.557113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.580732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.580856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.581036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.581236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.581897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.582211] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.582490] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.582908] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.584166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.584415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.608718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.608854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.686790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [125.686800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [125.686803] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [125.686806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [125.686810] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [125.686813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [125.686816] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [125.686819] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [125.689028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [125.689180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [125.690343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [125.690452] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [125.690468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.690606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.693458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.694530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.694670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.694853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.695039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.695262] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.695482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.695643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.695804] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.695924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.696071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.696162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [125.696180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [125.720703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.720812] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.720962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.721131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.721667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.721943] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.722140] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.722470] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.723254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.723406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.746556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.746687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.746873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.747038] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.747767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.747918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.748035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.748175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.752107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.753206] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.753409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.753591] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.753729] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.753881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.754075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.754249] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.754427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.754545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.754690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.754786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [125.754804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [125.779299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.779418] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.779582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.779760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.780493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.780944] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.781339] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.781850] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.783221] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.783463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.807743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.807873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.808032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.808159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.808897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.809020] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.809136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.809287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.816554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.817662] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.817807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.817940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.818071] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.818220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.818354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [125.818376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [125.818613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.818773] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.818934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.819061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.819208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.843896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.844005] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.844155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.844368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.844969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.845298] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.845602] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.845973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.847384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.847626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.862016] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.862100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.862226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.862382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.863166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.863307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.863423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.863555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.868629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.869738] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.869895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.870029] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.870158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.870322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.870504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [125.870527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [125.870665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.870826] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.870986] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.871104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.871268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.895936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.896060] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.896274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.896496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.896990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.897218] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.897427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.897703] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.898584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.898754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.923033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.923164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [125.923354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [125.923502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [125.924205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [125.924347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [125.924480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [125.924616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [125.930821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [125.931876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.932068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [125.932259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.932446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [125.932652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [125.932837] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [125.932867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [125.933000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [125.933163] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [125.933352] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [125.933494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [125.933666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [125.957762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [125.957917] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [125.958150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [125.958465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [125.959059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [125.959376] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [125.959607] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [125.959967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [125.961226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [125.961490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [125.985871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [125.985967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.060021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [126.060032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [126.060036] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [126.060039] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [126.060043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [126.060046] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [126.060049] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [126.060053] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [126.062653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.062822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [126.065469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.065621] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [126.065646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.065832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.069749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.070859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.071016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.071146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.071285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.071466] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.071698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [126.071750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.071967] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.072171] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.072303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.072477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.072576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [126.097079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.097187] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.097375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.097573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.098095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.098576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.098698] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.098916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.100084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.100293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.117967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.118053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.118177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.118324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.119120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.119262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.119385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.119522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.122445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.123495] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.123657] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.123791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.123919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.124071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.124264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [126.124314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.124478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.124642] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.124759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.124905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.125009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [126.148734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.148853] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.149022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.149211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.149758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.149983] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.150146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.150448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.151667] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.151914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.176252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.176383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.176560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.176713] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.177451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.177609] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.177726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.177865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.181782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.182898] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.183053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.183183] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.183331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.183483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.183673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [126.183721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.183887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.184051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.184168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.184335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.184477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [126.209057] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.209156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.209314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.209507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.210110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.210349] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.210481] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.210713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.211855] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.212070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.236391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.236517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.236691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.236851] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.237567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.237718] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.237833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.237970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.246309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.247390] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [126.247416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [126.247566] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.247703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.247835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.247964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.248116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.248349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.248515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.248676] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.248795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.248942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.272766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.272921] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.273157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.273478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.274107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.274441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.274692] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.275064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.276386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.276612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.300923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.301010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.301139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.301293] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.302074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.302200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.302335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.302481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.309732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.310840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.310987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.311120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.311261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.311421] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.311591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [126.311620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [126.311754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.311918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.312082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.312211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.312389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.337056] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.337153] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.337311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.337498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.337940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.338116] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.338256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.338490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.339513] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.339810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.365250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.365380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.441908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [126.441919] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [126.441923] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [126.441926] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [126.441929] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [126.441932] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [126.441936] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [126.441939] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [126.444232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.444417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [126.446990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.447143] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [126.447168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.447368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.449892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.450973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.451129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.451272] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.451423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.451588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.451817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [126.451874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.452088] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.452310] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.452430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.452579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.452678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [126.476769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.476870] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.476998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.477163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.477976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.478368] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.478672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.479072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.480299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.480548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.499323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.499409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.499539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.499668] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.501550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.501705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.501835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.501987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.504898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.505948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.506138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.506338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.506520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.506668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.506839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [126.506882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.507043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.507211] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.507343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.507505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.507597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [126.530712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.530846] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.531039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.531296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.531921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.532361] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.532693] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.533070] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.534336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.534577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.558860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.558991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.559161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.559307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.560029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.560157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.560288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.560439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.567688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.568797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.568961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.569095] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.569225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.569396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.569573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [126.569596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [126.569725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.569884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.570046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.570173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.570345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.595046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.595159] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.595360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.595581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.596059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.596277] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.596458] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.596701] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.597497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.597644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.620786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.620887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.621015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.621147] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.621935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.622066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.622195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.622372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.629595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.630703] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.630867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.631002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.631133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.631302] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.631476] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [126.631497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [126.631627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.631786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.631948] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.632062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.632206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.656798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.656906] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.657058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.657229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.657741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.657952] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.658096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.658308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.659496] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.659726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.681877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.681979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.682111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.682256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.683036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.683162] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.683317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.683461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.690688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.691807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.691949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.692082] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.692212] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.692385] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.692564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [126.692592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [126.692718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.692881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.693042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.693168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.693339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.717712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.717808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.717938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.718087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.718892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.719427] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.719834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.720529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.721916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.722142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.744273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.744403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.822906] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [126.822918] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [126.822921] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [126.822924] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [126.822928] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [126.822931] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [126.822934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [126.822938] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [126.824896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.825071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [126.825851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [126.825998] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [126.826022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.826216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.831090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.832196] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.832358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.832491] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.832625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.832787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.833040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.833268] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.833486] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.833604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.833752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.833846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [126.833865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [126.858452] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.858556] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.858699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.858859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.859334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.859582] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.859771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.860020] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.861179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.861393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.885669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.885802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.885980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.886150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.886879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.887005] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.887119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.887273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.892334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.893444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.893636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.893820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.893970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.894118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.894296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [126.894328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [126.894475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.894635] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.894801] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.894918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.895065] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.918733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.918855] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.918989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.919142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.919675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.920105] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.920518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.920966] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.922407] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.922628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [126.946893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [126.947030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [126.947206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [126.947371] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [126.948091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [126.948216] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [126.948352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [126.948513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [126.953617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [126.954665] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.954852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [126.955033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.955216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [126.955422] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [126.955614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [126.955636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [126.955769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [126.955932] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [126.956093] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [126.956213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [126.956381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [126.980993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [126.981091] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [126.981220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [126.981402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [126.981972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [126.982471] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [126.982863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [126.983323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [126.984798] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [126.985009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.004913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.005041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.005220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.005418] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.006152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.006304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.006431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.006567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.010543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.011626] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.011765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.011900] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.012028] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.012178] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.012365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [127.012405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.012600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.012823] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.012992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.013174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.013289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [127.037691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.037858] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.038119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.038454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.039118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.039488] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.039812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.040284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.042056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.042378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.067851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.067944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.068080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.068217] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.069000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.069127] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.069256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.069397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.076662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.077771] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.077917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.078046] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.078172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.078346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.078518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [127.078546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [127.078674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.078837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.079001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.079121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.079279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.103659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.103803] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.104020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.104303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.104904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.105172] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.105409] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.105771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.106920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.107149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.130377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.130529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.215211] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [127.215221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [127.215225] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [127.215228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [127.215232] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [127.215235] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [127.215249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [127.215255] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [127.217617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [127.217789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [127.219801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [127.219942] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [127.219959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.220095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.224886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.225998] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.226188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.226383] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.226567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.226769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.226947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [127.226969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [127.227103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.227274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.227469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.227589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.227737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.252388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.252506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.252677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.252867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.253587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.253837] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.254004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.254472] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.255623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.255850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.280137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.280282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.280463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.280592] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.281314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.281457] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.281573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.281710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.286754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.287863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.288049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.288230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.288432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.288591] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.288787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.288948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.289118] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.289236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.289407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.289503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [127.289522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [127.314061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.314229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.314548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.314930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.315699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.316075] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.316347] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.316751] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.317990] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.318222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.342560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.342689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.342870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.343021] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.343758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.343887] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.344002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.344136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.350344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.351400] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.351590] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.351772] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.351954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.352138] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.352326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [127.352347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [127.352483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.352643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.352810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.352929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.353076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.377720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.377830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.377989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.378168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.379008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.379519] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.379923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.380471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.381788] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.381991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.402976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.403108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.403309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.403474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.404183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.404337] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.404461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.404597] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.411837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.412945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.413132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.413330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.413475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.413625] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.413805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [127.413827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [127.413960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.414125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.414309] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.414450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.414596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.439274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.439370] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.439499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.439648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.440070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.440265] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.440428] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.440676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.441464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.441585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.461388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.461520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.461695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.461867] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.462603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.462750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.462866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.463002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.468018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.469141] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.469316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.469448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.469574] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.469720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.469892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [127.469922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <7> [127.470062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.470225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.470416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.470559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.470711] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.494788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.494937] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.495164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.495462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.496233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.496574] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.496907] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.497362] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.499167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.499513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.522805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.522908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.602937] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [127.602947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [127.602951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [127.602954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [127.602957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [127.602960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [127.602964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [127.602967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [127.605097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [127.605217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [127.606215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [127.606371] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [127.606387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.606526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.610475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.611585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.611738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.611871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.611999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.612152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.612424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.612642] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.612841] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.612963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.613113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.613205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [127.613222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [127.636824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.636935] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.637090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.637297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.637852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.638129] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.638293] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.638505] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.639346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.639512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.663781] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.663910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.664069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.664195] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.664936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.665060] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.665176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.665331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.670454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.671505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.671690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.671873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.672054] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.672270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.672447] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [127.672469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [127.672604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.672764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.672931] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.673053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.673201] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.697733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.697888] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.698129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.698456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.699170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.699626] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.699920] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.700308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.701726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.701918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.726186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.726282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.726409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.726537] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.727365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.727500] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.727616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.727753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.730662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.731708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.731878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.732028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.732164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.732342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.732546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.732705] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.732876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.732995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.733140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.733235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [127.733272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [127.757766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.757866] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.758004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.758161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.758667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.758918] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.759094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.759347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.760414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.760644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.780563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.780651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.780776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.780906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.781726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.781903] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.782028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.782165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.787182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.788291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.788438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.788572] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.788701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.788850] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.789024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [127.789046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [127.789178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.789356] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.789539] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.789667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.789817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.814504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.814621] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.814789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.814977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.815606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.815834] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.816004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.816381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.817411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.817641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.837560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.837668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.837846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [127.838022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [127.839854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [127.839995] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [127.840110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [127.840255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [127.844255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.845342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.845534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.845718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.845851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.846003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [127.846176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [127.846218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [127.846409] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.846597] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [127.846717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [127.846864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [127.904737] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [127.904786] [drm:drm_mode_setcrtc] [CONNECTOR:308:HDMI-A-1] <7> [127.904845] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [127.905001] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [127.905138] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [127.905321] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A] <7> [127.905525] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [127.905731] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [127.905931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [127.906115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [127.906295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [127.906494] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [127.906991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [127.907518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [127.908002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [127.908499] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [127.908959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [127.909461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [127.909921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [127.910431] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [127.910891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [127.911388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [127.911851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [127.912356] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [127.912809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [127.913284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [127.913733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [127.914196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [127.914696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [127.915169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [127.915660] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [127.916085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [127.916561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [127.916985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [127.917436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [127.917865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [127.918313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [127.918668] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [127.918987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [127.919319] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [127.919648] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [127.919972] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [127.920317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [127.920645] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [127.920651] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [127.920657] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [127.920662] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [127.920668] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [127.920673] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [127.920678] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [127.920684] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [127.920690] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [127.921022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [127.921361] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [127.921608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [127.921853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039) <7> [127.922098] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [127.922362] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [127.922603] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [127.922839] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [127.922845] i915 0000:00:02.0: colorspace: RGB <7> [127.922849] i915 0000:00:02.0: scan mode: Underscan <7> [127.922854] i915 0000:00:02.0: colorimetry: No Data <7> [127.922858] i915 0000:00:02.0: picture aspect: No Data <7> [127.922862] i915 0000:00:02.0: active aspect: Same as Picture <7> [127.922867] i915 0000:00:02.0: itc: No Data <7> [127.922871] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [127.922875] i915 0000:00:02.0: quantization range: Full <7> [127.922879] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [127.922883] i915 0000:00:02.0: video code: 0 <7> [127.922888] i915 0000:00:02.0: ycc quantization range: Full <7> [127.922892] i915 0000:00:02.0: hdmi content type: Graphics <7> [127.922896] i915 0000:00:02.0: pixel repeat: 0 <7> [127.922900] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [127.922905] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [127.923142] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [127.923410] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [127.923650] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [127.923655] i915 0000:00:02.0: vendor: Intel <7> [127.923659] i915 0000:00:02.0: product: Integrated gfx <7> [127.923664] i915 0000:00:02.0: source device information: PC General (0x9) <7> [127.923668] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [127.923917] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [127.924152] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [127.924414] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [127.924419] i915 0000:00:02.0: empty frame <7> [127.924423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [127.924690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [127.924853] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [127.925075] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [127.925230] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [127.925409] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [127.925568] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [127.925729] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [127.925891] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [127.926050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1 <7> [127.926226] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142 <7> [127.926419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0 <7> [127.926605] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [127.926779] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz) <7> [127.926953] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [127.927124] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [127.927309] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [127.927483] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [127.927647] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [127.927818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [127.927990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [127.928157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [127.928338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [127.928501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [127.928669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [127.928831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [127.929001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [127.929169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39 <7> [127.929353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [127.929520] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [127.929523] i915 0000:00:02.0: colorspace: RGB <7> [127.929526] i915 0000:00:02.0: scan mode: Underscan <7> [127.929529] i915 0000:00:02.0: colorimetry: No Data <7> [127.929532] i915 0000:00:02.0: picture aspect: No Data <7> [127.929535] i915 0000:00:02.0: active aspect: Same as Picture <7> [127.929538] i915 0000:00:02.0: itc: No Data <7> [127.929540] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [127.929543] i915 0000:00:02.0: quantization range: Full <7> [127.929546] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [127.929549] i915 0000:00:02.0: video code: 0 <7> [127.929551] i915 0000:00:02.0: ycc quantization range: Full <7> [127.929554] i915 0000:00:02.0: hdmi content type: Graphics <7> [127.929556] i915 0000:00:02.0: pixel repeat: 0 <7> [127.929558] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [127.929562] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [127.929565] i915 0000:00:02.0: vendor: Intel <7> [127.929567] i915 0000:00:02.0: product: Integrated gfx <7> [127.929570] i915 0000:00:02.0: source device information: PC General (0x9) <7> [127.929573] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [127.929576] i915 0000:00:02.0: empty frame <7> [127.929579] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [127.929582] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [127.929584] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [127.929587] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [127.929590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [127.929760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [127.929925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [127.930098] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [127.930272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [127.930438] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [127.930605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500 <7> [127.930772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [127.930942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [127.931109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [127.931285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [127.931457] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [127.931622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [127.931791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [127.931959] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [127.932124] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.932304] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.932469] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.932629] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [127.932796] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [127.932962] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.933126] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.933304] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [127.933478] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [127.933646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:354] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [127.933815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [127.933981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [127.934145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [127.934331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [127.934498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [127.934663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [127.934827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [127.934994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [127.935159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [127.947297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [127.947441] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [127.947615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [127.947818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [127.948346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [127.948576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.948746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [127.949047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [127.949823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [127.949948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [127.970878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [127.971529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [127.971662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [127.972321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [127.973449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.973609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [127.973742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [127.973872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [127.974012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [127.974139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [127.974357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [127.974573] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [127.974684] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [127.974790] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [127.974900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [127.975010] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [127.975119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [127.975225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [127.975408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [127.975565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [127.975675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [127.975784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [127.975903] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [127.976045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [127.976200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [127.976374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [127.976529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [127.976690] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [127.976846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [127.976993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [127.977100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [127.977210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [127.977333] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [127.977485] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [127.977650] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [127.977775] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [127.977893] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [127.978007] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [127.978124] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [127.978255] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [127.978386] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [127.978567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [127.978727] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [127.978844] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [127.979012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [127.979198] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [127.979854] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [127.980345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [127.980469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [127.981161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [127.981330] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [127.981347] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [127.981617] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD <7> [127.990047] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [127.990193] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [127.990353] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [127.990532] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [127.990536] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [127.990539] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [127.990542] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [127.990580] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [127.990742] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [127.998354] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [127.998655] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [127.998801] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [127.999086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [127.999466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <6> [128.000307] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS <7> [128.000361] [drm:drm_mode_setcrtc] [CRTC:98:pipe A] <7> [128.026457] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [128.026468] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [128.026471] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [128.026474] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [128.026478] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [128.026481] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [128.026484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [128.026488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [128.026969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.027090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.027657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.027828] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [128.027865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [128.027890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [128.028056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.028230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.028552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.028683] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.028807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [128.028837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [128.028983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.029163] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.029406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.029532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.029652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <7> [128.029723] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [128.029990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [128.030112] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [128.030231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [128.030398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [128.030532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [128.030650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [128.030764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [128.030925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [128.031079] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [128.031197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [128.031328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [128.031514] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0) <7> [128.031678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0) <7> [128.031849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0) <7> [128.032012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0) <7> [128.032175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0) <7> [128.032377] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0) <7> [128.032543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [128.032700] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [128.032821] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [128.032940] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [128.033056] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [128.033220] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [128.033407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0) <7> [128.033546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0) <7> [128.033663] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0) <7> [128.033780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0) <7> [128.033898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0) <7> [128.034076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0) <7> [128.034223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [128.034355] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [128.034505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0) <7> [128.034623] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no) <7> [128.034738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no) <7> [128.034853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no) <7> [128.034971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [128.035131] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [128.035133] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [128.035135] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [128.035136] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [128.035137] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.035139] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.035140] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.035141] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.035143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [128.035318] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0) <7> [128.035471] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0) <7> [128.035590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0) <7> [128.035706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000) <7> [128.035822] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [128.035972] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.036138] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [128.036142] i915 0000:00:02.0: colorspace: RGB <7> [128.036144] i915 0000:00:02.0: scan mode: Underscan <7> [128.036147] i915 0000:00:02.0: colorimetry: No Data <7> [128.036150] i915 0000:00:02.0: picture aspect: No Data <7> [128.036152] i915 0000:00:02.0: active aspect: Same as Picture <7> [128.036155] i915 0000:00:02.0: itc: No Data <7> [128.036158] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [128.036161] i915 0000:00:02.0: quantization range: Full <7> [128.036164] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [128.036166] i915 0000:00:02.0: video code: 0 <7> [128.036169] i915 0000:00:02.0: ycc quantization range: Full <7> [128.036171] i915 0000:00:02.0: hdmi content type: Graphics <7> [128.036174] i915 0000:00:02.0: pixel repeat: 0 <7> [128.036176] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [128.036179] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.036354] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [128.036520] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.036683] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [128.036686] i915 0000:00:02.0: vendor: Intel <7> [128.036689] i915 0000:00:02.0: product: Integrated gfx <7> [128.036692] i915 0000:00:02.0: source device information: PC General (0x9) <7> [128.036695] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.036864] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [128.037031] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.037197] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [128.037200] i915 0000:00:02.0: empty frame <7> [128.037203] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.037377] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [128.037537] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0 <7> [128.037621] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [128.037694] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no <7> [128.037811] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [128.038026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0 <7> [128.038185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0 <7> [128.038329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [128.038445] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [128.038552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [128.038657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [128.038831] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0 <7> [128.038969] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0 <7> [128.039104] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [128.039223] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz <7> [128.039390] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [128.039519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset] <7> [128.039641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [128.039758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [128.039876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [128.040039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [128.040196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [128.040333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [128.040462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [128.040581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [128.048334] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A] <7> [128.065070] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [128.065228] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [128.065996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [128.066153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.066782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [128.066917] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [128.066928] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio <7> [128.067060] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [128.074367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [128.074521] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A] <7> [128.074655] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0 <7> [128.074780] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A] <7> [128.074902] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [128.075086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [128.075205] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [128.075335] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [128.075494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [128.075651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [128.075803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [128.075960] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [128.076081] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [128.076190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [128.076319] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [128.076429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [128.076582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [128.076691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [128.076802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [128.076911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [128.077015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [128.077124] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [128.077284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [128.077391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [128.077495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [128.077599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [128.077708] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [128.077826] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [128.077946] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [128.078065] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [128.078226] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [128.078405] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [128.078527] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [128.078648] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [128.078798] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [128.078968] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [128.079155] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [128.079498] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [128.079633] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [128.079723] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [128.080044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [128.080165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.080303] [drm:drm_mode_setcrtc] [CRTC:167:pipe B] <7> [128.080324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.080522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.080658] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.080784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [128.080811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [128.080967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.081096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.081281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.081410] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.081533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [128.081727] [drm:drm_mode_setcrtc] [CRTC:236:pipe C] <7> [128.081841] [drm:drm_mode_setcrtc] [CRTC:305:pipe D] <7> [128.092031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3 <7> [128.092257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [128.092437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [128.092614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [128.092783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [128.093962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [128.094433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [128.098381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [128.099509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.099695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [128.099877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.100058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [128.100276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0 <7> [128.100860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1 <7> [128.101087] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.101324] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9 <7> [128.101494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08 <7> [128.101703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [128.183853] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36) <7> [128.184011] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [128.184130] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [128.184498] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A] <7> [128.184685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [128.184857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [128.185013] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [128.185132] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [128.185352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [128.185503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [128.185658] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [128.185813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [128.185970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [128.186131] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [128.186414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [128.186587] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [128.186752] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080) <7> [128.186915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144) <7> [128.187161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080) <7> [128.187299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144) <7> [128.187455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083) <7> [128.187574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088) <7> [128.187691] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [128.187806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [128.187921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [128.188034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [128.188151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [128.188288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [128.188433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080) <7> [128.188549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144) <7> [128.188667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080) <7> [128.188782] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144) <7> [128.188898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083) <7> [128.189014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088) <7> [128.189131] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [128.189261] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [128.189412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4) <7> [128.189529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes) <7> [128.189647] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes) <7> [128.189763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes) <7> [128.189876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer <7> [128.189991] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.189993] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.189995] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.189997] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [128.189998] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [128.190000] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [128.190002] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [128.190004] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 <7> [128.190006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [128.190126] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500) <7> [128.190258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500) <7> [128.190428] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500) <7> [128.190543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039) <7> [128.190660] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe <7> [128.190777] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.190895] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.191011] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [128.191014] i915 0000:00:02.0: colorspace: RGB <7> [128.191016] i915 0000:00:02.0: scan mode: Underscan <7> [128.191018] i915 0000:00:02.0: colorimetry: No Data <7> [128.191020] i915 0000:00:02.0: picture aspect: No Data <7> [128.191022] i915 0000:00:02.0: active aspect: Same as Picture <7> [128.191023] i915 0000:00:02.0: itc: No Data <7> [128.191025] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [128.191027] i915 0000:00:02.0: quantization range: Full <7> [128.191029] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [128.191031] i915 0000:00:02.0: video code: 0 <7> [128.191033] i915 0000:00:02.0: ycc quantization range: Full <7> [128.191035] i915 0000:00:02.0: hdmi content type: Graphics <7> [128.191037] i915 0000:00:02.0: pixel repeat: 0 <7> [128.191039] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [128.191041] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe <7> [128.191154] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.191282] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.191453] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [128.191455] i915 0000:00:02.0: vendor: Intel <7> [128.191457] i915 0000:00:02.0: product: Integrated gfx <7> [128.191459] i915 0000:00:02.0: source device information: PC General (0x9) <7> [128.191462] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe <7> [128.191578] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected: <7> [128.191693] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found: <7> [128.191810] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [128.191812] i915 0000:00:02.0: empty frame <7> [128.191814] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [128.191961] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no <7> [128.192070] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1 <7> [128.192195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993 <7> [128.192439] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55 <7> [128.192574] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7,twm, swm, stwm <7> [128.192679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 <7> [128.192784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 <7> [128.192894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 <7> [128.193004] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1 <7> [128.193126] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142 <7> [128.193262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0 <7> [128.193426] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz) <7> [128.193548] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz) <7> [128.193673] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change <7> [128.193789] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [128.193905] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [128.194018] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0 <7> [128.194130] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0 <7> [128.194383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset] <7> [128.194503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [128.194622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [128.194738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [128.194856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [128.194974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [128.195090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [128.195202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [128.195329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39 <7> [128.195456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0 <7> [128.195575] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [128.195577] i915 0000:00:02.0: colorspace: RGB <7> [128.195579] i915 0000:00:02.0: scan mode: Underscan <7> [128.195581] i915 0000:00:02.0: colorimetry: No Data <7> [128.195583] i915 0000:00:02.0: picture aspect: No Data <7> [128.195585] i915 0000:00:02.0: active aspect: Same as Picture <7> [128.195587] i915 0000:00:02.0: itc: No Data <7> [128.195589] i915 0000:00:02.0: extended colorimetry: xvYCC 601 <7> [128.195591] i915 0000:00:02.0: quantization range: Full <7> [128.195593] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling <7> [128.195594] i915 0000:00:02.0: video code: 0 <7> [128.195596] i915 0000:00:02.0: ycc quantization range: Full <7> [128.195598] i915 0000:00:02.0: hdmi content type: Graphics <7> [128.195600] i915 0000:00:02.0: pixel repeat: 0 <7> [128.195602] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0 <7> [128.195604] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [128.195606] i915 0000:00:02.0: vendor: Intel <7> [128.195608] i915 0000:00:02.0: product: Integrated gfx <7> [128.195610] i915 0000:00:02.0: source device information: PC General (0x9) <7> [128.195612] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4 <7> [128.195614] i915 0000:00:02.0: empty frame <7> [128.195615] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00 <7> [128.195617] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47 <7> [128.195619] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff <7> [128.195621] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00 <7> [128.195623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [128.195739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [128.195857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5 <7> [128.195973] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [128.196092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5 <7> [128.196207] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5 <7> [128.196358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500 <7> [128.196497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0 <7> [128.196615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [128.196732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [128.196849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [128.196965] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0 <7> [128.197080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [128.197195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <6> [128.197345] ahci 0000:00:17.0: port does not support device sleep <7> [128.197363] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [128.197556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.197676] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.197834] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.197948] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [128.198067] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [128.198183] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.198316] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.198430] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [128.198593] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [128.198753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [128.198873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [128.198988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [128.199105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7> [128.199224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7> [128.199434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7> [128.199562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7> [128.199677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no <7> [128.199795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no <7> [128.199912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no <7> [128.211489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [128.211579] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9 <7> [128.211707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00 <7> [128.211857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [128.212197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [128.212623] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [128.212746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [128.212940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [128.213797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [128.213958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [128.225002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [128.225327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [128.225458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [128.226143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [128.227308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.227449] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [128.227581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [128.227758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [128.227946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [128.228070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [128.228204] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [128.228487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B] <7> [128.228603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1] <7> [128.228715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A] <7> [128.228823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B] <7> [128.228931] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C] <7> [128.229041] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D] <7> [128.229151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2] <7> [128.229277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A] <7> [128.229448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B] <7> [128.229573] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C] <7> [128.229683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D] <7> [128.229842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3] <7> [128.229953] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A] <7> [128.230064] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B] <7> [128.230171] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C] <7> [128.230291] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D] <7> [128.230464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4] <7> [128.230610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A] <7> [128.230718] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B] <7> [128.230826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C] <7> [128.230932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D] <7> [128.231072] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [128.231258] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [128.231433] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL <7> [128.231609] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1 <7> [128.231782] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2 <7> [128.231955] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3 <7> [128.232150] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4 <7> [128.232307] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5 <7> [128.232522] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6 <7> [128.232649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [128.232809] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A] <7> [128.232928] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0 <7> [128.233170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [128.233398] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [128.234007] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10 <7> [128.234467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [128.234621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.235122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1) <7> [128.235286] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6 <7> [128.235298] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio <7> [128.235555] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD <7> [128.243938] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults <7> [128.244075] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000) <7> [128.244197] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N <6> [128.244358] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected <6> [128.244363] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected <6> [128.244366] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected <6> [128.244370] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected <7> [128.244414] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1 <7> [128.244579] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A] <7> [128.252277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3 <7> [128.252597] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1] <7> [128.252742] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A] <7> [128.253058] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [128.253933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1] <6> [128.254592] [IGT] i915_pm_rpm: exiting, ret=0 <7> [128.280461] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz <7> [128.280479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [128.280482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink. <7> [128.280484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [128.280488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc. <7> [128.280490] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS <7> [128.280493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [128.280495] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10 <7> [128.280842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.280969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [128.281513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1) <7> [128.281690] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [128.281726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8 <7> [128.281760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1] <7> [128.281928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.282116] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.282341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.282509] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.282629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1 <7> [128.282871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2] <7> [128.283039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.283209] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.283408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.283554] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.283675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1 <6> [128.285820] Console: switching to colour frame buffer device 240x67 <7> [128.285756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3] <7> [128.285923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.286102] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.286378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.286502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.286624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1 <7> [128.286787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4] <7> [128.286950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off <7> [128.287078] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded <7> [128.287254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off <7> [128.287414] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded <7> [128.287533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1 <7> [128.288302] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [121.524508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1]

<7> [121.524533] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [121.551221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [121.551236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [121.551260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [121.551265] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [121.551269] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [121.551273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [121.551278] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [121.551282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [121.551702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [121.551901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [121.552488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [121.552748] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [121.553766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [121.553785] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [121.553792] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553796] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553800] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553804] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553808] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553813] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553816] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553820] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.553825] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [121.553829] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [121.553834] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [121.553838] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [121.553843] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [121.553848] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [121.553852] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [121.553857] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [121.553861] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [121.553865] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [121.553869] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [121.553874] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [121.553879] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [121.553883] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [121.553888] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [121.553892] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [121.553896] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [121.553901] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [121.553906] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [121.553910] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [121.553915] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [121.553919] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.553924] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.553929] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [121.553932] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.553936] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.553940] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.553944] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.553947] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.553952] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.553956] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [121.553961] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [121.553966] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [121.553970] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [121.553975] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [121.553979] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [121.553984] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [121.553989] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [121.553993] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [121.553998] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [121.554003] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [121.554008] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [121.554012] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [121.554016] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [121.554021] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [121.554025] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [121.554029] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [121.554034] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [121.554038] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [121.554042] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [121.554047] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [121.554051] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [121.554056] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [121.554060] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [121.554065] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [121.554069] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [121.554073] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [121.554078] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [121.554083] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [121.554087] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [121.554092] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [121.554096] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [121.554101] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [121.554104] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [121.554330] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [121.554349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [121.554529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.554709] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.554936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.555111] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.555322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [121.555477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [121.555493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [121.555719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.555895] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.556119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.556321] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.556486] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [121.556617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [121.556634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [121.556798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.556972] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.557192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.557389] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.557557] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [121.557688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [121.557705] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [121.557867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.558041] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.558260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.558492] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.558668] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<7> [121.574883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [121.574906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [121.575101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.575310] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.575546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.575722] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.575897] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [121.576764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [121.576777] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [121.576893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.577022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.577201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.577363] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.577481] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [121.578132] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [121.578150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [121.578357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.578514] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.578677] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.578802] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.578918] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [121.579442] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [121.579454] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [121.579571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.579746] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.579968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.580139] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.580305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<7> [121.581010] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1]

<7> [121.581028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [121.607699] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [121.607709] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [121.607712] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [121.607715] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [121.607718] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [121.607721] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [121.607724] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [121.607727] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [121.608091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [121.608207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [121.608710] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [121.608853] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [121.609516] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] probed modes :

<7> [121.609530] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [121.609536] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609539] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609541] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609544] [drm:drm_mode_debug_printmodeline] Modeline "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609546] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609549] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609551] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609554] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5

<7> [121.609557] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5

<7> [121.609559] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [121.609562] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5

<7> [121.609564] [drm:drm_mode_debug_printmodeline] Modeline "3440x1440": 90 476140 3440 3448 3480 3520 1440 1441 1449 1503 0x40 0xa

<7> [121.609567] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 75 443250 2560 2768 3048 3536 1600 1603 1609 1672 0x40 0x6

<7> [121.609569] [drm:drm_mode_debug_printmodeline] Modeline "2560x1600": 60 348500 2560 2752 3032 3504 1600 1603 1609 1658 0x40 0x6

<7> [121.609572] [drm:drm_mode_debug_printmodeline] Modeline "2560x1440": 120 497770 2560 2608 2640 2720 1440 1443 1448 1525 0x40 0xa

<7> [121.609574] [drm:drm_mode_debug_printmodeline] Modeline "2048x1536": 60 267027 2048 2200 2424 2800 1536 1537 1540 1589 0x0 0x6

<7> [121.609577] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 495000 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [121.609580] [drm:drm_mode_debug_printmodeline] Modeline "2560x1080": 120 494505 2560 3108 3152 3300 1080 1084 1089 1250 0x40 0x5

<7> [121.609582] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 75 297000 1920 2064 2288 2640 1440 1441 1444 1500 0x40 0x6

<7> [121.609585] [drm:drm_mode_debug_printmodeline] Modeline "1920x1440": 60 234000 1920 2048 2256 2600 1440 1441 1444 1500 0x40 0x6

<7> [121.609587] [drm:drm_mode_debug_printmodeline] Modeline "2160x1200": 90 261420 2160 2208 2240 2320 1200 1203 1208 1252 0x40 0xa

<7> [121.609590] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 75 288000 1856 1984 2208 2560 1392 1393 1396 1500 0x40 0x6

<7> [121.609592] [drm:drm_mode_debug_printmodeline] Modeline "1856x1392": 60 218250 1856 1952 2176 2528 1392 1393 1396 1439 0x40 0x6

<7> [121.609595] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 75 261000 1792 1888 2104 2456 1344 1345 1348 1417 0x40 0x6

<7> [121.609597] [drm:drm_mode_debug_printmodeline] Modeline "1792x1344": 60 204750 1792 1920 2120 2448 1344 1345 1348 1394 0x40 0x6

<7> [121.609600] [drm:drm_mode_debug_printmodeline] Modeline "2048x1152": 60 162000 2048 2074 2154 2250 1152 1153 1156 1200 0x40 0x5

<7> [121.609602] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x40 0xa

<7> [121.609605] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 75 245250 1920 2056 2264 2608 1200 1203 1209 1255 0x40 0x6

<7> [121.609607] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 193250 1920 2056 2256 2592 1200 1203 1209 1245 0x40 0x6

<7> [121.609610] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.609613] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.609615] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6

<7> [121.609618] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.609620] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [121.609623] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 75 202500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.609625] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 70 189000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.609628] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 65 175500 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.609630] [drm:drm_mode_debug_printmodeline] Modeline "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5

<7> [121.609633] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6

<7> [121.609636] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6

<7> [121.609638] [drm:drm_mode_debug_printmodeline] Modeline "1680x945": 60 131481 1680 1784 1960 2240 945 946 949 978 0x0 0x6

<7> [121.609641] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 75 156000 1400 1504 1648 1896 1050 1053 1057 1099 0x40 0x6

<7> [121.609643] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 121750 1400 1488 1632 1864 1050 1053 1057 1089 0x40 0x6

<7> [121.609646] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [121.609648] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [121.609651] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [121.609654] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6

<7> [121.609656] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6

<7> [121.609659] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [121.609661] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 84963 1366 1431 1567 1776 768 771 781 798 0x0 0x6

<7> [121.609664] [drm:drm_mode_debug_printmodeline] Modeline "1360x768": 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5

<7> [121.609666] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6

<7> [121.609669] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6

<7> [121.609672] [drm:drm_mode_debug_printmodeline] Modeline "1152x864": 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5

<7> [121.609674] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x6

<7> [121.609677] [drm:drm_mode_debug_printmodeline] Modeline "1280x768": 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6

<7> [121.609679] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5

<7> [121.609682] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5

<7> [121.609684] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa

<7> [121.609687] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [121.609689] [drm:drm_mode_debug_printmodeline] Modeline "1024x576": 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6

<7> [121.609692] [drm:drm_mode_debug_printmodeline] Modeline "832x624": 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa

<7> [121.609694] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5

<7> [121.609697] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5

<7> [121.609699] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [121.609702] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [121.609705] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [121.609707] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa

<7> [121.609710] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 73 31500 640 664 704 832 480 489 492 520 0x40 0xa

<7> [121.609712] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa

<7> [121.609715] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [121.609717] [drm:drm_mode_debug_printmodeline] Modeline "720x400": 70 28320 720 738 846 900 400 412 414 449 0x40 0x6

<7> [121.609768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1]

<7> [121.609780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [121.609903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.610034] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.610204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.610353] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.610495] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:318:DP-1] disconnected

<7> [121.610534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2]

<7> [121.610551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [121.610720] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.610853] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.611021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.611147] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.611284] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:328:DP-2] disconnected

<7> [121.611316] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3]

<7> [121.611333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [121.611464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.611589] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.611755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.611877] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.611992] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:337:DP-3] disconnected

<7> [121.612015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4]

<7> [121.612026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [121.612138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [121.612282] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [121.612483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [121.612610] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [121.612768] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:346:DP-4] disconnected

<6> [121.637071] ahci 0000:00:17.0: port does not support device sleep

<7> [122.637353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [122.637833] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [122.638283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [122.638721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [122.639135] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [122.639630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [122.640112] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [122.640520] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [122.640965] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [122.641371] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [122.641740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [122.641973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [122.642102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [122.642219] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [122.642382] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [122.642516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [122.642636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [122.642753] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [122.642867] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [122.642985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [122.643102] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [122.643224] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [122.643359] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [122.643486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [122.643632] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [122.643749] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [122.643865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [122.643978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [122.644094] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [122.644213] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [122.644375] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [122.644492] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [122.644607] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [122.644721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [122.644836] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [122.644957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [122.645081] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [122.645197] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [122.645199] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [122.645200] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [122.645202] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [122.645204] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [122.645205] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [122.645207] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [122.645208] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [122.645210] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [122.645343] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [122.645486] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [122.645605] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [122.645719] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000)

<7> [122.645832] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [122.645947] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [122.646063] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [122.646078] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [122.646085] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [122.646087] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [122.646204] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [122.646337] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [122.646477] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [122.646482] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [122.646483] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [122.646598] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [122.646712] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [122.646822] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [122.646825] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [122.646943] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [122.647060] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [122.647208] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [122.647338] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [122.647516] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [122.647625] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [122.647729] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [122.647835] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [122.647942] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [122.648048] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [122.648178] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [122.648320] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [122.648458] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [122.648575] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [122.648692] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [122.648816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [122.648932] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [122.649059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [122.649179] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [122.649313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [122.649448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [122.649564] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [122.649677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [122.649791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [122.657167] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A]

<7> [122.673815] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [122.673970] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [122.674801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [122.674955] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [122.675462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [122.675612] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [122.675628] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [122.675823] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [122.682272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [122.682488] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [122.682680] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [122.682861] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [122.683034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [122.683385] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [122.683577] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [122.683740] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [122.683899] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [122.684057] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [122.684174] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [122.684393] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [122.684508] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [122.684619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [122.684764] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [122.684896] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [122.685006] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [122.685113] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [122.685219] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [122.685355] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [122.685495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [122.685612] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [122.685723] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [122.685835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [122.685944] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [122.686054] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [122.686165] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [122.686306] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [122.686451] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [122.686572] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [122.686691] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [122.686810] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [122.686926] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [122.687045] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [122.687164] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [122.687337] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [122.687497] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [122.687648] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [122.687803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [122.687936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [122.688085] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [122.688322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [122.688456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [122.688574] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [122.689995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [122.690797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [122.691932] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.692121] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [122.692319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.692498] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [122.692679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [122.692853] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [122.693018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [122.694412] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [122.695289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [122.696416] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.696631] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [122.696811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.696998] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [122.697179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [122.697373] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [122.697539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [122.698921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [122.699809] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [122.700943] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.701136] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [122.701335] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.701522] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [122.701704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [122.701871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [122.702036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [122.717915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [122.718595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [122.719708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.719847] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [122.720000] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.720155] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [122.720287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [122.720409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [122.720546] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [122.732859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [122.733018] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [122.733145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [122.733300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [122.733443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [122.896433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [122.896612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [122.900649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [122.901813] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.902106] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [122.902412] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.902695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [122.903016] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [122.903471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [122.903854] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [122.904229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [122.904583] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [122.904944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.017471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.017679] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.018033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.018525] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.019414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.019999] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.020550] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.021136] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.022970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.023350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.047801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.047976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.048142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.048864] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.050006] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.050156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.050302] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.050448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.050573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.050692] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.050808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.051941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.052129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.060746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.061865] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.062020] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.062151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.062297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.062464] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.062660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.062822] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.062983] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.063101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.063263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.087923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.088062] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.088312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.088623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.089269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.089613] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.089895] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.090346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.091801] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.092148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.116599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.116722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.116844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.117708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.118835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.118984] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.119117] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.119268] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.119407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.119544] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.119682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.121909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.122077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.125605] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [123.130708] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.131942] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.132103] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.132235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.132388] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.132568] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.132791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.132953] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.133140] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.133275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.133450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.158149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.158281] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.158427] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.158591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.159083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.159472] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.159814] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.160268] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.161793] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.162053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.179817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.179908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.259429] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [123.259440] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [123.259443] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [123.259446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [123.259450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [123.259453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [123.259457] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [123.259461] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [123.261665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [123.261839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [123.264485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [123.264639] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [123.264663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.264844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.268758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.269870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.270024] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.270158] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.270299] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.270509] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.271195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.271386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.271567] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.271691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.271839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.271933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [123.295936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.296033] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.296161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.296351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.296851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.297178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.297520] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.297921] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.299162] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.299396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.322560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.322696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.322817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.323659] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.324811] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.324952] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.325085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.325258] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.325412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.325535] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.325652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.326781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.326965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.335588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.336698] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.336854] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.336991] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.337122] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.337298] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.337539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.337701] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.337865] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.337986] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.338134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.362941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.363079] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.363330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.363640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.364328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.364685] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.364978] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.365407] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.366809] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.367178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.391654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.391776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.391901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [123.392858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.393888] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.394041] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.394204] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.394386] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.394538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [123.394662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.394797] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.397026] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.397178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.398331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [123.405842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.407048] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.407210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.407386] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.407526] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.407687] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.408094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.408291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.408481] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.408600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.408748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.432812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.432915] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.433043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.433191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.433704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.433952] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.434131] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.434464] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.435529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.435871] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.456983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.457121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.457320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.457502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.458280] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.458459] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.458624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.458824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.463944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.464993] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.465185] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.465385] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.465569] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.465784] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.466017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [123.466049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [123.466255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.466475] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.466697] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.466868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.467068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.490743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.490844] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.490971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.491119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.491624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.491872] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.492050] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.492372] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.493169] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.493357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.516511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.516642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.516821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.516999] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.518826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.519015] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.519179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.519396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.522301] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.523369] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.523560] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.523744] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.523926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.524139] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.524382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [123.524435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.524653] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.524873] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.525042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.525257] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.525407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [123.549913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.550028] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.550193] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.550437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.551007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.551276] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.551452] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.551734] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.552549] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.552720] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.570383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.570517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.570696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.570878] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.572712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.572887] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.573055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.573263] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.578319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.579429] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.579619] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.579802] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.579986] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.580195] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.580439] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [123.580470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [123.580657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.580875] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.581093] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.581272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.581477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.605725] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.605841] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.606009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.606160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.606653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.606897] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.607072] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.607344] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.608148] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.608329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.623791] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.623925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.624100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.624309] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.625077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.625262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.625428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.625634] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.629641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.630706] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.630902] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.631085] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.631278] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.631492] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.631730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [123.631772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [123.631962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.632179] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.632416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.632588] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.632793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.657464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.657565] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.657691] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.657841] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.658302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.658536] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.658711] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.659033] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.659848] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.660018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.679883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.679976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.765612] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [123.765622] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [123.765626] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [123.765629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [123.765632] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [123.765636] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [123.765639] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [123.765642] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [123.767942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [123.768110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [123.770607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [123.770760] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [123.770785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.770961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.774874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.775987] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.776145] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.776287] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.776456] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.776667] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.776902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [123.776957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.777171] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.777350] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.777482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.777631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.777728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [123.801825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.801923] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.802050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.802198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.802703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.803071] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.803381] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.803773] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.804937] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.805169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.823953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.824039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.824166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.824323] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.826190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.826382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.826549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.826700] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.830619] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.831728] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.831919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.832102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.832297] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.832496] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.832670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [123.832712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.832872] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.833035] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.833187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.833406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.833506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [123.857913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.858027] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.858189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.858407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.859080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.859935] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.860216] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.860730] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.862057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.862292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.882202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.882301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.882424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.882553] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.884430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.884597] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.884731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.884868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.893208] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.894288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [123.894315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [123.894511] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.894700] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.894838] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.894966] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.895118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.895403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.895587] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.895751] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.895870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.896017] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.919906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.920010] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.920156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.920345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.920893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.921378] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.921751] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.922143] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.923630] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.923823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [123.948092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [123.948221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [123.948415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [123.948564] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [123.949284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [123.949427] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [123.949546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [123.949684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [123.953669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [123.954742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.954933] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [123.955122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.955309] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [123.955514] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [123.955700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [123.955722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [123.955851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [123.956011] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [123.956176] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [123.956313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [123.956461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [123.980808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [123.980965] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [123.981201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [123.981519] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [123.982236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [123.983034] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [123.983298] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [123.983655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [123.984872] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [123.985050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.009315] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.009444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.009622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.009770] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.010489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.010640] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.010757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.010893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.018165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.019225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.019384] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.019540] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.019671] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.019822] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.020007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [124.020043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [124.020198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.020378] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.020555] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.020674] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.020823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.044694] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.044841] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.045057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.045345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.045947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.046215] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.046458] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.046811] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.047981] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.048223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.070355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.070462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.150961] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [124.150971] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [124.150974] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [124.150977] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [124.150981] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [124.150984] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [124.150987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [124.150991] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [124.151626] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.151776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [124.152880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.152992] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [124.153008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.153143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.161489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.162570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [124.162596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [124.162743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.162880] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.163012] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.163140] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.163305] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.163551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.163713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.163877] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.163994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.164148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.188794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.188925] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.189118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.189384] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.189963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.190208] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.190430] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.190756] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.191829] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.192055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.210860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.210951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.211077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.211203] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.212022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.212159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.212292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.212438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.220768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.221846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [124.221872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [124.222066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.222261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.222401] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.222532] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.222681] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.222901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.223066] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.223229] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.223370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.223530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.248206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.248380] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.248568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.248775] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.249308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.249618] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.249866] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.250227] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.251347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.251565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.272560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.272687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.272866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.273025] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.274795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.274919] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.275036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.275170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.282485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.283610] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.283799] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.283981] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.284156] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.284294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [124.284317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [124.284460] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.284691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.284894] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.285068] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.285187] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.285355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.309951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.310051] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.310189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.310388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.310917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.311178] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.311374] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.311630] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.312368] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.312495] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.333478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.333596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.333750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.333880] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.335709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.335847] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.335965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.336102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.344497] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.345564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [124.345590] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [124.345781] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.345921] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.346051] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.346181] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.346358] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.346603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.346762] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.346924] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.347039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.347186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.371132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.371276] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.371480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.371664] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.372321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.372532] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.372680] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.372996] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.374181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.374429] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.398721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.398855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.399035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.399194] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.399924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.400051] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.400166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.400323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.405365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.406492] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.406684] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.406870] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.407031] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.407183] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.407372] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [124.407413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [124.407545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.407713] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.407874] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.407994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.408143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.431876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.431999] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.432179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.432424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.433020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.433348] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.433547] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.433816] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.434812] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.435019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.451592] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.451689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.532910] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [124.532921] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [124.532924] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [124.532928] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [124.532931] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [124.532934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [124.532938] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [124.532941] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [124.535237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.535417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [124.537907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.538057] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [124.538083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.538233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.542973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.544081] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.544279] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.544463] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.544645] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.544824] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.545012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [124.545033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [124.545168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.545345] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.545546] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.545667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.545814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.569714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.569813] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.569948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.570099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.570745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.571041] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.571288] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.571689] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.572895] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.573134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.594177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.594295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.594421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.594548] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.595350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.595524] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.595691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.595883] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.604237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.605344] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.605490] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.605624] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.605753] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.605902] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.606094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.606264] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.606454] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.606573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.606719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.606810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [124.606828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [124.630721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.630823] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.630957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.631115] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.631620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.631813] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.631942] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.632182] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.633166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.633404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.653317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.653418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.653544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.653674] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.654477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.654629] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.654747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.654882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.663225] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.664305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [124.664331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [124.664478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.664615] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.664748] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.664876] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.665026] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.665214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.665393] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.665571] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.665695] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.665841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.689822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.689940] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.690108] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.690333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.690962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.691441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.691724] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.692087] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.693619] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.693831] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.718118] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.718256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.718426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.718555] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.719291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.719419] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.719536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.719672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.724779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.725844] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.726035] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.726224] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.726428] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.726630] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.726827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.726986] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.727147] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.727292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.727459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.727554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [124.727573] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [124.750812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.750919] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.751062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.751223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.751811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.752074] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.752273] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.752527] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.753618] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.753829] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.773745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.773829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.773955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.774083] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.774915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.775043] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.775204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.775446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.783802] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.784880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [124.784922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [124.785088] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.785224] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.785377] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.785520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.785669] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.785866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.786025] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.786189] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.786318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.786489] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.811111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.811209] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.811369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.811564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.812089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.812321] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.812453] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.812690] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.813933] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.814174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.835258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.835351] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.914021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [124.914031] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [124.914035] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [124.914038] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [124.914041] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [124.914045] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [124.914048] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [124.914051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [124.916653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.916825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [124.919467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [124.919617] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [124.919641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.919780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.922223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.923295] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.923448] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.923582] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.923711] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.923859] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.924036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [124.924079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.924252] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.924448] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.924563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.924745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [124.924863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [124.948780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [124.948903] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [124.949083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [124.949331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [124.950046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [124.950351] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [124.950593] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [124.950901] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [124.952160] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [124.952393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [124.976678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [124.976813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [124.976988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [124.977115] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [124.977849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [124.977991] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [124.978107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [124.978253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [124.985486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [124.986596] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.986758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [124.986893] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.987025] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [124.987174] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [124.987307] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [124.987334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [124.987560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [124.987721] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [124.987882] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [124.988011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [124.988158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.012801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.012988] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.013335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.013717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.014398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.014844] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.015214] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.015737] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.016983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.017302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.039420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.039552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.039732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.039908] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.040640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.040781] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.040895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.041032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.049370] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.050465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [125.050491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [125.050687] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.050877] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.051020] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.051149] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.051323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.051560] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.051719] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.051878] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.051995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.052141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.075795] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.075916] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.076089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.076322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.076941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.077356] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.077637] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.077946] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.079143] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.079376] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.103656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.103787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.103955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.104086] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.104821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.104968] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.105084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.105223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.112714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.113820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.113987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.114122] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.114253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [125.114274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [125.114421] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.114572] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.114798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.114958] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.115120] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.115264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.115438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.140067] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.140165] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.140325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.140513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.140983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.141474] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.141755] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.142144] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.143711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.143923] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.164928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.165028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.165154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.165302] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.166070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.166194] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.166357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.166513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.173733] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.174847] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.174993] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.175125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.175272] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.175425] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.175594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [125.175622] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [125.175752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.175914] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.176075] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.176191] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.176355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.201012] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.201137] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.201356] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.201615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.202126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.202395] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.202569] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.202869] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.203815] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.204039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.225068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.225157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.302419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [125.302430] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [125.302434] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [125.302437] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [125.302441] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [125.302444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [125.302447] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [125.302450] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [125.304746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [125.304914] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [125.307633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [125.307779] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [125.307804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.307989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.311905] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.313015] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.313153] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.313307] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.313441] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.313592] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.313764] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [125.313806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.313968] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.314146] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.314329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.314529] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.314678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [125.339142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.339274] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.339425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.339594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.340131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.340450] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.340753] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.341180] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.342468] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.342684] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.363653] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.363739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.363863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.363992] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.364813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.364967] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.365083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.365219] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.372465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.373578] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.373767] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.373949] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.374081] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.374231] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.374367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [125.374390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [125.374584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.374743] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.374906] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.375023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.375170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.399772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.399879] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.400031] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.400201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.400727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.401002] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.401201] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.401490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.402262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.402413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.423393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.423526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.423707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.423876] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.424607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.424767] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.424885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.425023] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.430040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.431151] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.431321] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.431451] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.431579] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.431727] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.431904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [125.431926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [125.432071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.432235] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.432424] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.432568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.432731] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.457387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.457484] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.457613] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.457772] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.458442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.458653] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.458776] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.459008] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.459724] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.459842] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.484076] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.484194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.484352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.484501] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.485224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.485386] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.485539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.485736] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.494089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.495188] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.495328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [125.495348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [125.495481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.495617] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.495749] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.495898] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.496140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.496314] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.496486] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.496604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.496751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.521451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.521549] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.521678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.521827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.522548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.523025] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.523450] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.523977] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.525359] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.525560] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.544354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.544453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.544581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.544709] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.545534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.545711] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.545877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.546070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.554418] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.555511] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [125.555547] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [125.555714] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.555852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.555983] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.556111] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.556284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.556514] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.556675] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.556841] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.556962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.557113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.580732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.580856] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.581036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.581236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.581897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.582211] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.582490] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.582908] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.584166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.584415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.608718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.608854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.686790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [125.686800] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [125.686803] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [125.686806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [125.686810] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [125.686813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [125.686816] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [125.686819] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [125.689028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [125.689180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [125.690343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [125.690452] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [125.690468] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.690606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.693458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.694530] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.694670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.694853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.695039] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.695262] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.695482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.695643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.695804] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.695924] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.696071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.696162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [125.696180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [125.720703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.720812] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.720962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.721131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.721667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.721943] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.722140] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.722470] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.723254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.723406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.746556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.746687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.746873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.747038] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.747767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.747918] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.748035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.748175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.752107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.753206] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.753409] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.753591] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.753729] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.753881] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.754075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.754249] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.754427] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.754545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.754690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.754786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [125.754804] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [125.779299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.779418] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.779582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.779760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.780493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.780944] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.781339] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.781850] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.783221] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.783463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.807743] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.807873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.808032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.808159] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.808897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.809020] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.809136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.809287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.816554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.817662] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.817807] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.817940] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.818071] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.818220] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.818354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [125.818376] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [125.818613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.818773] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.818934] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.819061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.819208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.843896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.844005] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.844155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.844368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.844969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.845298] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.845602] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.845973] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.847384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.847626] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.862016] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.862100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.862226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.862382] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.863166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.863307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.863423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.863555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.868629] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.869738] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.869895] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.870029] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.870158] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.870322] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.870504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [125.870527] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [125.870665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.870826] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.870986] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.871104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.871268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.895936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.896060] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.896274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.896496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.896990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.897218] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.897427] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.897703] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.898584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.898754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.923033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.923164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [125.923354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [125.923502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [125.924205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [125.924347] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [125.924480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [125.924616] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [125.930821] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [125.931876] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.932068] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [125.932259] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.932446] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [125.932652] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [125.932837] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [125.932867] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [125.933000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [125.933163] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [125.933352] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [125.933494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [125.933666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [125.957762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [125.957917] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [125.958150] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [125.958465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [125.959059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [125.959376] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [125.959607] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [125.959967] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [125.961226] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [125.961490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [125.985871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [125.985967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.060021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [126.060032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [126.060036] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [126.060039] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [126.060043] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [126.060046] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [126.060049] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [126.060053] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [126.062653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.062822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [126.065469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.065621] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [126.065646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.065832] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.069749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.070859] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.071016] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.071146] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.071285] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.071466] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.071698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [126.071750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.071967] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.072171] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.072303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.072477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.072576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [126.097079] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.097187] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.097375] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.097573] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.098095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.098576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.098698] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.098916] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.100084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.100293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.117967] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.118053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.118177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.118324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.119120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.119262] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.119385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.119522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.122445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.123495] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.123657] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.123791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.123919] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.124071] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.124264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [126.124314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.124478] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.124642] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.124759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.124905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.125009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [126.148734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.148853] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.149022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.149211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.149758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.149983] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.150146] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.150448] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.151667] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.151914] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.176252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.176383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.176560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.176713] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.177451] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.177609] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.177726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.177865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.181782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.182898] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.183053] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.183183] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.183331] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.183483] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.183673] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [126.183721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.183887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.184051] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.184168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.184335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.184477] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [126.209057] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.209156] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.209314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.209507] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.210110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.210349] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.210481] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.210713] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.211855] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.212070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.236391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.236517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.236691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.236851] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.237567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.237718] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.237833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.237970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.246309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.247390] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [126.247416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [126.247566] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.247703] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.247835] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.247964] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.248116] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.248349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.248515] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.248676] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.248795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.248942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.272766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.272921] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.273157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.273478] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.274107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.274441] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.274692] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.275064] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.276386] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.276612] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.300923] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.301010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.301139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.301293] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.302074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.302200] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.302335] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.302481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.309732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.310840] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.310987] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.311120] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.311261] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.311421] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.311591] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [126.311620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [126.311754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.311918] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.312082] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.312211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.312389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.337056] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.337153] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.337311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.337498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.337940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.338116] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.338256] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.338490] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.339513] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.339810] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.365250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.365380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.441908] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [126.441919] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [126.441923] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [126.441926] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [126.441929] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [126.441932] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [126.441936] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [126.441939] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [126.444232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.444417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [126.446990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.447143] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [126.447168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.447368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.449892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.450973] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.451129] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.451272] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.451423] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.451588] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.451817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [126.451874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.452088] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.452310] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.452430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.452579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.452678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [126.476769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.476870] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.476998] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.477163] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.477976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.478368] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.478672] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.479072] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.480299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.480548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.499323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.499409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.499539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.499668] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.501550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.501705] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.501835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.501987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.504898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.505948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.506138] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.506338] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.506520] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.506668] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.506839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [126.506882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.507043] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.507211] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.507343] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.507505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.507597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [126.530712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.530846] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.531039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.531296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.531921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.532361] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.532693] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.533070] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.534336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.534577] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.558860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.558991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.559161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.559307] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.560029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.560157] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.560288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.560439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.567688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.568797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.568961] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.569095] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.569225] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.569396] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.569573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [126.569596] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [126.569725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.569884] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.570046] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.570173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.570345] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.595046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.595159] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.595360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.595581] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.596059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.596277] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.596458] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.596701] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.597497] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.597644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.620786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.620887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.621015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.621147] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.621935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.622066] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.622195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.622372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.629595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.630703] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.630867] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.631002] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.631133] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.631302] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.631476] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [126.631497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [126.631627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.631786] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.631948] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.632062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.632206] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.656798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.656906] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.657058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.657229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.657741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.657952] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.658096] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.658308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.659496] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.659726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.681877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.681979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.682111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.682256] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.683036] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.683162] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.683317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.683461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.690688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.691807] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.691949] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.692082] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.692212] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.692385] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.692564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [126.692592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [126.692718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.692881] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.693042] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.693168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.693339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.717712] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.717808] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.717938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.718087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.718892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.719427] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.719834] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.720529] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.721916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.722142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.744273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.744403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.822906] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [126.822918] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [126.822921] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [126.822924] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [126.822928] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [126.822931] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [126.822934] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [126.822938] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [126.824896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.825071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [126.825851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [126.825998] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [126.826022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.826216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.831090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.832196] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.832358] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.832491] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.832625] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.832787] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.833040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.833268] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.833486] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.833604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.833752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.833846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [126.833865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [126.858452] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.858556] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.858699] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.858859] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.859334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.859582] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.859771] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.860020] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.861179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.861393] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.885669] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.885802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.885980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.886150] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.886879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.887005] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.887119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.887273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.892334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.893444] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.893636] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.893820] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.893970] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.894118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.894296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [126.894328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [126.894475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.894635] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.894801] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.894918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.895065] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.918733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.918855] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.918989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.919142] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.919675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.920105] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.920518] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.920966] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.922407] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.922628] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [126.946893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [126.947030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [126.947206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [126.947371] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [126.948091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [126.948216] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [126.948352] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [126.948513] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [126.953617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [126.954665] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.954852] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [126.955033] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.955216] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [126.955422] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [126.955614] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [126.955636] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [126.955769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [126.955932] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [126.956093] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [126.956213] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [126.956381] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [126.980993] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [126.981091] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [126.981220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [126.981402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [126.981972] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [126.982471] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [126.982863] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [126.983323] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [126.984798] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [126.985009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.004913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.005041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.005220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.005418] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.006152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.006304] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.006431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.006567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.010543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.011626] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.011765] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.011900] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.012028] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.012178] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.012365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [127.012405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.012600] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.012823] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.012992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.013174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.013289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [127.037691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.037858] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.038119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.038454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.039118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.039488] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.039812] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.040284] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.042056] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.042378] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.067851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.067944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.068080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.068217] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.069000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.069127] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.069256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.069397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.076662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.077771] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.077917] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.078046] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.078172] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.078346] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.078518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [127.078546] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [127.078674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.078837] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.079001] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.079121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.079279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.103659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.103803] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.104020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.104303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.104904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.105172] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.105409] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.105771] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.106920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.107149] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.130377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.130529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.215211] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [127.215221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [127.215225] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [127.215228] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [127.215232] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [127.215235] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [127.215249] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [127.215255] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [127.217617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [127.217789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [127.219801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [127.219942] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [127.219959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.220095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.224886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.225998] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.226188] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.226383] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.226567] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.226769] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.226947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [127.226969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [127.227103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.227274] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.227469] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.227589] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.227737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.252388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.252506] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.252677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.252867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.253587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.253837] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.254004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.254472] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.255623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.255850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.280137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.280282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.280463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.280592] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.281314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.281457] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.281573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.281710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.286754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.287863] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.288049] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.288230] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.288432] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.288591] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.288787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.288948] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.289118] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.289236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.289407] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.289503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [127.289522] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [127.314061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.314229] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.314548] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.314930] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.315699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.316075] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.316347] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.316751] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.317990] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.318222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.342560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.342689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.342870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.343021] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.343758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.343887] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.344002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.344136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.350344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.351400] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.351590] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.351772] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.351954] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.352138] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.352326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [127.352347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [127.352483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.352643] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.352810] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.352929] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.353076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.377720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.377830] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.377989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.378168] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.379008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.379519] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.379923] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.380471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.381788] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.381991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.402976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.403108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.403309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.403474] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.404183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.404337] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.404461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.404597] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.411837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.412945] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.413132] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.413330] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.413475] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.413625] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.413805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [127.413827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [127.413960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.414125] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.414309] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.414450] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.414596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.439274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.439370] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.439499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.439648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.440070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.440265] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.440428] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.440676] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.441464] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.441585] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.461388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.461520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.461695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.461867] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.462603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.462750] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.462866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.463002] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.468018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.469141] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.469316] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.469448] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.469574] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.469720] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.469892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [127.469922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [127.470062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.470225] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.470416] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.470559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.470711] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.494788] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.494937] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.495164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.495462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.496233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.496574] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.496907] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.497362] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.499167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.499513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.522805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.522908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.602937] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [127.602947] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [127.602951] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [127.602954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [127.602957] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [127.602960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [127.602964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [127.602967] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [127.605097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [127.605217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [127.606215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [127.606371] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [127.606387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.606526] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.610475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.611585] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.611738] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.611871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.611999] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.612152] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.612424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.612642] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.612841] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.612963] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.613113] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.613205] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [127.613222] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [127.636824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.636935] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.637090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.637297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.637852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.638129] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.638293] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.638505] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.639346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.639512] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.663781] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.663910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.664069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.664195] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.664936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.665060] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.665176] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.665331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.670454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.671505] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.671690] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.671873] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.672054] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.672270] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.672447] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [127.672469] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [127.672604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.672764] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.672931] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.673053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.673201] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.697733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.697888] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.698129] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.698456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.699170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.699626] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.699920] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.700308] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.701726] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.701918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.726186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.726282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.726409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.726537] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.727365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.727500] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.727616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.727753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.730662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.731708] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.731878] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.732028] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.732164] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.732342] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.732546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.732705] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.732876] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.732995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.733140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.733235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [127.733272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [127.757766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.757866] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.758004] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.758161] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.758667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.758918] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.759094] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.759347] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.760414] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.760644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.780563] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.780651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.780776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.780906] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.781726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.781903] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.782028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.782165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.787182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.788291] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.788438] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.788572] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.788701] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.788850] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.789024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [127.789046] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [127.789178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.789356] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.789539] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.789667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.789817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.814504] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.814621] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.814789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.814977] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.815606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.815834] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.816004] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.816381] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.817411] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.817641] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.837560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.837668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.837846] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [127.838022] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [127.839854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [127.839995] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [127.840110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [127.840255] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [127.844255] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.845342] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.845534] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.845718] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.845851] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.846003] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [127.846176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [127.846218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [127.846409] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.846597] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [127.846717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [127.846864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [127.904845] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [127.905001] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [127.905138] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [127.905321] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A]

<7> [127.905525] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [127.905731] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [127.905931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [127.906115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [127.906295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [127.906494] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [127.906991] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [127.907518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [127.908002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [127.908499] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [127.908959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [127.909461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [127.909921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [127.910431] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [127.910891] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [127.911388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [127.911851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [127.912356] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [127.912809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [127.913284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [127.913733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [127.914196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [127.914696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [127.915169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [127.915660] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [127.916085] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [127.916561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [127.916985] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [127.917436] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [127.917865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [127.918313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [127.918668] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [127.918987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [127.919319] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [127.919648] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [127.919972] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [127.920317] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [127.920645] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [127.920651] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [127.920657] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [127.920662] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [127.920668] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [127.920673] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [127.920678] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [127.920684] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [127.920690] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [127.921022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [127.921361] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [127.921608] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [127.921853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039)

<7> [127.922098] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [127.922362] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [127.922603] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [127.922839] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [127.922879] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [127.922900] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [127.922905] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [127.923142] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [127.923410] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [127.923650] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [127.923664] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [127.923668] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [127.923917] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [127.924152] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [127.924414] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [127.924423] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [127.924690] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [127.924853] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [127.925075] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [127.925230] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [127.925409] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [127.925568] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [127.925729] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [127.925891] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [127.926050] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1

<7> [127.926226] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142

<7> [127.926419] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0

<7> [127.926605] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [127.926779] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz)

<7> [127.926953] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [127.927124] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [127.927309] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [127.927483] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [127.927647] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [127.927818] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [127.927990] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [127.928157] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [127.928338] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [127.928501] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [127.928669] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [127.928831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [127.929001] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [127.929169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39

<7> [127.929353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [127.929520] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [127.929546] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [127.929558] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [127.929562] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [127.929570] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [127.929573] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [127.929579] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [127.929582] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [127.929584] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [127.929587] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [127.929590] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [127.929760] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [127.929925] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [127.930098] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [127.930272] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [127.930438] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [127.930605] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500

<7> [127.930772] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [127.930942] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [127.931109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [127.931285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [127.931457] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [127.931622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [127.931791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [127.931959] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [127.932124] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.932304] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.932469] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.932629] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [127.932796] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [127.932962] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.933126] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.933304] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [127.933478] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [127.933646] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:354] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [127.933815] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [127.933981] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [127.934145] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [127.934331] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [127.934498] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [127.934663] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [127.934827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [127.934994] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [127.935159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [127.947297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [127.947441] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [127.947615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [127.947818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [127.948346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [127.948576] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.948746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [127.949047] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [127.949823] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [127.949948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [127.970878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [127.971529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [127.971662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [127.972321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [127.973449] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.973609] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [127.973742] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [127.973872] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [127.974012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [127.974139] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [127.974357] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [127.974573] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [127.974684] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [127.974790] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [127.974900] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [127.975010] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [127.975119] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [127.975225] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [127.975408] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [127.975565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [127.975675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [127.975784] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [127.975903] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [127.976045] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [127.976200] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [127.976374] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [127.976529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [127.976690] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [127.976846] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [127.976993] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [127.977100] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [127.977210] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [127.977333] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [127.977485] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [127.977650] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [127.977775] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [127.977893] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [127.978007] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [127.978124] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [127.978255] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [127.978386] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [127.978567] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [127.978727] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [127.978844] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [127.979012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [127.979198] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [127.979854] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [127.980345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [127.980469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [127.981161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [127.981330] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [127.981347] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [127.981617] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD

<7> [127.990047] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [127.990193] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [127.990353] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [127.990532] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [127.990536] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [127.990539] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [127.990542] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [127.990580] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [127.990742] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [127.998354] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [127.998655] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [127.998801] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [127.999086] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [127.999466] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<6> [128.000307] [IGT] i915_pm_rpm: finished subtest basic-rte, SUCCESS

<7> [128.026457] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [128.026468] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [128.026471] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [128.026474] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [128.026478] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [128.026481] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [128.026484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [128.026488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [128.026969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.027090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.027657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.027828] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [128.027865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [128.027890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [128.028056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.028230] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.028552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.028683] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.028807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [128.028837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [128.028983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.029163] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.029406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.029532] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.029652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<7> [128.029723] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [128.029990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [128.030112] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [128.030231] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [128.030398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [128.030532] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [128.030650] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [128.030764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [128.030925] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [128.031079] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [128.031197] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [128.031328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [128.031514] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)

<7> [128.031678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1144, found 0)

<7> [128.031849] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)

<7> [128.032012] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1144, found 0)

<7> [128.032175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)

<7> [128.032377] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)

<7> [128.032543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [128.032700] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [128.032821] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [128.032940] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [128.033056] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [128.033220] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [128.033407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)

<7> [128.033546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1144, found 0)

<7> [128.033663] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)

<7> [128.033780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1144, found 0)

<7> [128.033898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)

<7> [128.034076] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)

<7> [128.034223] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [128.034355] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [128.034505] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)

<7> [128.034623] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected yes, found no)

<7> [128.034738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected yes, found no)

<7> [128.034853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected yes, found no)

<7> [128.034971] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [128.035131] expected: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [128.035133] expected: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [128.035135] expected: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [128.035136] expected: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [128.035137] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.035139] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.035140] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.035141] found: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.035143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [128.035318] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 285500, found 0)

<7> [128.035471] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 285500, found 0)

<7> [128.035590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 285500, found 0)

<7> [128.035706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000039, found 0x00000000)

<7> [128.035822] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [128.035972] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.036138] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [128.036164] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [128.036176] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [128.036179] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.036354] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [128.036520] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.036683] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [128.036692] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [128.036695] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.036864] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [128.037031] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.037197] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [128.037203] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.037377] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [128.037537] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:98:pipe A] releasing DPLL 0

<7> [128.037621] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [128.037694] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x3 -> 0x1 (total dbuf slices 0x3), mbus joined? no->no

<7> [128.037811] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [128.038026] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 1993) -> ( 0 - 0), size 1993 -> 0

<7> [128.038185] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb (1993 - 2048) -> ( 0 - 0), size 55 -> 0

<7> [128.038329] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [128.038445] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [128.038552] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [128.038657] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [128.038831] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 0 num active planes 0

<7> [128.038969] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 0

<7> [128.039104] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [128.039223] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 172800 kHz, actual 172800 kHz

<7> [128.039390] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [128.039519] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: no [modeset]

<7> [128.039641] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [128.039758] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [128.039876] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [128.040039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [128.040196] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [128.040333] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [128.040462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [128.040581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [128.048334] i915 0000:00:02.0: [drm:intel_audio_codec_disable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Disable audio codec on [CRTC:98:pipe A]

<7> [128.065070] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [128.065228] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [128.065996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [128.066153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.066782] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [128.066917] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [128.066928] i915 0000:00:02.0: [drm:intel_disable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to reset sink scrambling/TMDS bit clock ratio

<7> [128.067060] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [128.074367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [128.074521] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:98:pipe A]

<7> [128.074655] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0

<7> [128.074780] i915 0000:00:02.0: [drm:__intel_fbc_disable [i915]] Disabling FBC on [PLANE:31:plane 1A]

<7> [128.074902] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 172800 kHz, VCO 345600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [128.075086] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [128.075205] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [128.075335] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [128.075494] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [128.075651] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [128.075803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [128.075960] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [128.076081] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [128.076190] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [128.076319] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [128.076429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [128.076582] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [128.076691] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [128.076802] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [128.076911] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [128.077015] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [128.077124] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [128.077284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [128.077391] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [128.077495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [128.077599] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [128.077708] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [128.077826] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [128.077946] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [128.078065] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [128.078226] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [128.078405] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [128.078527] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [128.078648] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [128.078798] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [128.078968] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [128.079155] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [128.079498] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [128.079633] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [128.079723] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [128.080044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [128.080165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.080324] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.080522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.080658] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.080784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [128.080811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [128.080967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.081096] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.081281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.081410] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.081533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [128.092031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3

<7> [128.092257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [128.092437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [128.092614] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [128.092783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [128.093962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [128.094433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [128.098381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [128.099509] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.099695] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [128.099877] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.100058] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [128.100276] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x0

<7> [128.100860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_1

<7> [128.101087] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.101324] i915 0000:00:02.0: [drm:bxt_enable_dc9 [i915]] Enabling DC9

<7> [128.101494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 08

<7> [128.101703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [128.183853] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:308:HDMI-A-1] Limiting display bpp to 24 (EDID bpp 24, max requested bpp 36, max platform bpp 36)

<7> [128.184011] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [128.184130] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:98:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [128.184498] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:307:DDI B/PHY B] [CRTC:98:pipe A]

<7> [128.184685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [128.184857] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [128.185013] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [128.185132] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [128.185352] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [128.185503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [128.185658] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [128.185813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [128.185970] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [128.186131] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [128.186414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [128.186587] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [128.186752] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)

<7> [128.186915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1144)

<7> [128.187161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)

<7> [128.187299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1144)

<7> [128.187455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)

<7> [128.187574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)

<7> [128.187691] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [128.187806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [128.187921] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [128.188034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [128.188151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [128.188288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [128.188433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)

<7> [128.188549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1144)

<7> [128.188667] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)

<7> [128.188782] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1144)

<7> [128.188898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)

<7> [128.189014] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)

<7> [128.189131] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [128.189261] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [128.189412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)

<7> [128.189529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_hdmi_sink (expected no, found yes)

<7> [128.189647] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_infoframe (expected no, found yes)

<7> [128.189763] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in has_audio (expected no, found yes)

<7> [128.189876] i915 0000:00:02.0: [drm:intel_pipe_config_compare [i915]] fastset requirement not met in eld buffer

<7> [128.189991] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.189993] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.189995] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.189997] expected: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [128.189998] found: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [128.190000] found: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [128.190002] found: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [128.190004] found: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03

<7> [128.190006] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [128.190126] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 285500)

<7> [128.190258] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 285500)

<7> [128.190428] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in port_clock (expected 0, found 285500)

<7> [128.190543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:98:pipe A] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000039)

<7> [128.190660] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in avi infoframe

<7> [128.190777] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.190895] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.191011] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [128.191029] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [128.191039] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [128.191041] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in spd infoframe

<7> [128.191154] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.191282] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.191453] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [128.191459] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [128.191462] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] fastset requirement not met in hdmi infoframe

<7> [128.191578] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] expected:

<7> [128.191693] i915 0000:00:02.0: [drm:pipe_config_infoframe_mismatch [i915]] found:

<7> [128.191810] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [128.191814] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [128.191961] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0x1 -> 0x3 (total dbuf slices 0x3), mbus joined? no->no

<7> [128.192070] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:98:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x1

<7> [128.192195] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 1993), size 0 -> 1993

<7> [128.192439] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:94:cursor A] ddb ( 0 - 0) -> (1993 - 2048), size 0 -> 55

<7> [128.192574] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7,*twm, swm, stwm

<7> [128.192679] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 8, 8, 8, 8, 11, 16, 16, 0, 0, 0

<7> [128.192784] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 129, 129, 129, 129, 177, 257, 257, 30, 0, 0

<7> [128.192894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 143, 143, 143, 143, 196, 284, 284, 31, 0, 0

<7> [128.193004] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:98:pipe A] data rate 1142000 num active planes 1

<7> [128.193126] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 16761 required 1142

<7> [128.193262] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] No SAGV, using single QGV point 0

<7> [128.193426] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (142750 kHz) > [CRTC:98:pipe A] min cdclk (0 kHz)

<7> [128.193548] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (22305 kHz) > old min cdclk (0 kHz)

<7> [128.193673] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] Modeset required for cdclk change

<7> [128.193789] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [128.193905] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [128.194018] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:98:pipe A] allocated DPLL 0

<7> [128.194130] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:98:pipe A] reserving DPLL 0

<7> [128.194383] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:98:pipe A] enable: yes [modeset]

<7> [128.194503] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [128.194622] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [128.194738] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [128.194856] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [128.194974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [128.195090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [128.195202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [128.195329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 1, infoframes: 1, infoframes enabled: 0x39

<7> [128.195456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] GCP: 0x0

<7> [128.195575] i915 0000:00:02.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [128.195593] i915 0000:00:02.0: nups: Unknown Non-uniform Scaling

<7> [128.195602] i915 0000:00:02.0: bar top 0, bottom 0, left 0, right 0

<7> [128.195604] i915 0000:00:02.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [128.195610] i915 0000:00:02.0: source device information: PC General (0x9)

<7> [128.195612] i915 0000:00:02.0: HDMI infoframe: Vendor, version 1, length 4

<7> [128.195615] ELD: 10 00 0f 00 6d a2 00 7f 00 00 00 00 00 00 00 00

<7> [128.195617] ELD: 0d 82 34 12 66 69 74 48 65 61 64 6c 65 73 73 47

<7> [128.195619] ELD: 53 7f 7f 28 0f 7f 07 17 7f ff 3f 7f ff 47 7f ff

<7> [128.195621] ELD: 5f 7f 82 7f 7f 00 7f 7f 51 7f 7f 30 77 7f 03 00

<7> [128.195623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [128.195739] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [128.195857] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x48 0x5

<7> [128.195973] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [128.196092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1080": 120 285500 1920 1968 2000 2080 1080 1083 1088 1144 0x40 0x5

<7> [128.196207] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=285500, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1080 vb=1080-1144 vs=1083-1088 vt=1144, flags=0x5

<7> [128.196358] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 285500, pipe src: 1920x1080+0+0, pixel rate 285500

<7> [128.196497] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 59, ips linetime: 0

<7> [128.196615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [128.196732] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [128.196849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [128.196965] i915 0000:00:02.0: [drm:icl_dump_hw_state [i915]] dpll_hw_state: cfgcr0: 0x1801be, cfgcr1: 0x488, div0: 0x0, mg_refclkin_ctl: 0x0, hg_clktop2_coreclkctl1: 0x0, mg_clktop2_hsclkctl: 0x0, mg_pll_div0: 0x0, mg_pll_div2: 0x0, mg_pll_lf: 0x0, mg_pll_frac_lock: 0x0, mg_pll_ssc: 0x0, mg_pll_bias: 0x0, mg_pll_tdc_coldst_bias: 0x0

<7> [128.197080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [128.197195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<6> [128.197345] ahci 0000:00:17.0: port does not support device sleep

<7> [128.197363] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [128.197556] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.197676] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.197834] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.197948] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [128.198067] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [128.198183] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.198316] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.198430] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [128.198593] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [128.198753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:355] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [128.198873] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [128.198988] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [128.199105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no

<7> [128.199224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no

<7> [128.199434] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no

<7> [128.199562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no

<7> [128.199677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:plane 6A] fb: [NOFB], visible: no

<7> [128.199795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:85:plane 7A] fb: [NOFB], visible: no

<7> [128.199912] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:94:cursor A] fb: [NOFB], visible: no

<7> [128.211489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [128.211579] i915 0000:00:02.0: [drm:bxt_disable_dc9 [i915]] Disabling DC9

<7> [128.211707] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 08 to 00

<7> [128.211857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [128.212197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [128.212623] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [128.212746] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [128.212940] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [128.213797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [128.213958] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [128.225002] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [128.225327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [128.225458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [128.226143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [128.227308] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.227449] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [128.227581] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [128.227758] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [128.227946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [128.228070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [128.228204] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [128.228487] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:307:DDI B/PHY B]

<7> [128.228603] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:317:DDI TC1/PHY TC1]

<7> [128.228715] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:319:DP-MST A]

<7> [128.228823] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:320:DP-MST B]

<7> [128.228931] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:321:DP-MST C]

<7> [128.229041] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:322:DP-MST D]

<7> [128.229151] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:327:DDI TC2/PHY TC2]

<7> [128.229277] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:329:DP-MST A]

<7> [128.229448] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:330:DP-MST B]

<7> [128.229573] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:331:DP-MST C]

<7> [128.229683] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:332:DP-MST D]

<7> [128.229842] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:336:DDI TC3/PHY TC3]

<7> [128.229953] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:338:DP-MST A]

<7> [128.230064] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:339:DP-MST B]

<7> [128.230171] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:340:DP-MST C]

<7> [128.230291] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:341:DP-MST D]

<7> [128.230464] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:345:DDI TC4/PHY TC4]

<7> [128.230610] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:347:DP-MST A]

<7> [128.230718] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:348:DP-MST B]

<7> [128.230826] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:349:DP-MST C]

<7> [128.230932] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:350:DP-MST D]

<7> [128.231072] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [128.231258] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [128.231433] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TBT PLL

<7> [128.231609] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 1

<7> [128.231782] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 2

<7> [128.231955] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 3

<7> [128.232150] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 4

<7> [128.232307] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 5

<7> [128.232522] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] TC PLL 6

<7> [128.232649] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [128.232809] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:98:pipe A]

<7> [128.232928] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0

<7> [128.233170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [128.233398] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [128.234007] i915 0000:00:02.0: [drm:intel_hdmi_handle_sink_scrambling [i915]] [CONNECTOR:308:HDMI-A-1] scrambling=no, TMDS bit clock ratio=1/10

<7> [128.234467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [128.234621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.235122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0054 w(1)

<7> [128.235286] i915 0000:00:02.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:308:HDMI-A-1] Failed to read TMDS config: -6

<7> [128.235298] i915 0000:00:02.0: [drm:intel_enable_ddi [i915]] [CONNECTOR:308:HDMI-A-1] Failed to configure sink scrambling/TMDS bit clock ratio

<7> [128.235555] i915 0000:00:02.0: [drm:intel_audio_codec_enable [i915]] [CONNECTOR:308:HDMI-A-1][ENCODER:307:DDI B/PHY B] Enable audio codec on [CRTC:98:pipe A], 64 bytes ELD

<7> [128.243938] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] HDMI audio pixel clock setting for 285500 not found, falling back to defaults

<7> [128.244075] i915 0000:00:02.0: [drm:audio_config_hdmi_pixel_clock [i915]] Configuring HDMI audio for pixel clock 25200 (0x00010000)

<7> [128.244197] i915 0000:00:02.0: [drm:hsw_audio_config_update [i915]] using automatic N

<6> [128.244358] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 5 not expected

<6> [128.244363] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 0 not expected

<6> [128.244366] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 10 not expected

<6> [128.244370] snd_hda_codec_hdmi hdaudioC0D2: HDMI: audio coding xtype 6 not expected

<7> [128.244414] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] reserved 17694720 bytes of contiguous stolen space for FBC, limit: 1

<7> [128.244579] i915 0000:00:02.0: [drm:intel_fbc_update [i915]] Enabling FBC on [PLANE:31:plane 1A]

<7> [128.252277] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x3

<7> [128.252597] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [128.252742] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:98:pipe A]

<7> [128.253058] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [128.253933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:308:HDMI-A-1]

<7> [128.280461] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz

<7> [128.280479] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [128.280482] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] No deep color support on this HDMI sink.

<7> [128.280484] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [128.280488] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.

<7> [128.280490] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD monitor fitHeadlessGS

<7> [128.280493] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [128.280495] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:308:HDMI-A-1] ELD size 64, SAD count 10

<7> [128.280842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.280969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [128.281513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)

<7> [128.281690] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [128.281726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:308:HDMI-A-1] Same epoch counter 8

<7> [128.281760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:318:DP-1]

<7> [128.281928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.282116] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.282341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.282509] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.282629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:318:DP-1] Same epoch counter 1

<7> [128.282871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:328:DP-2]

<7> [128.283039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.283209] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.283408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.283554] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.283675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:328:DP-2] Same epoch counter 1

<6> [128.285820] Console: switching to colour frame buffer device 240x67

<7> [128.285756] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:337:DP-3]

<7> [128.285923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.286102] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.286378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.286502] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.286624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:337:DP-3] Same epoch counter 1

<7> [128.286787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:346:DP-4]

<7> [128.286950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling TC_cold_off

<7> [128.287078] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold block succeeded

<7> [128.287254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling TC_cold_off

<7> [128.287414] i915 0000:00:02.0: [drm:tgl_tc_cold_request [i915]] TC cold unblock succeeded

<7> [128.287533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:346:DP-4] Same epoch counter 1

<7> [128.288302] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

Results for igt@i915_pm_rpm@basic-rte