igt@i915_pm_rpm@basic-pci-d3-state on fi-skl-guc@linus-v6.5-rc4 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_client_modeset_commit_atomic+0x234/0x280 drm_client_modeset_commit_locked+0x56/0x190 drm_client_modeset_commit+0x23/0x50 __drm_fb_helper_restore_fbdev_mode_unlocked+0x99/0xd0 [drm_kms_helper] intel_fbdev_restore_mode+0x2f/0x60 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x22/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 Starting subtest: basic-pci-d3-state i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 edid_block_read+0x34/0xf0 _drm_do_get_edid+0xad/0x330 Stack trace: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1882 __igt_unique____real_main2421() #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() #3 [__libc_start_main+0xf3] #4 [_start+0x2e] Subtest basic-pci-d3-state: FAIL (10.761s)
Err	Starting subtest: basic-pci-d3-state (i915_pm_rpm:5344) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5344) CRITICAL: Test assertion failure function pci_d3_state_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1887: (i915_pm_rpm:5344) CRITICAL: Failed assertion: wait_for_suspended() Subtest basic-pci-d3-state failed. ** DEBUG (i915_pm_rpm:5344) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:5344) igt_device-DEBUG: Test requirement passed: pci_dev (i915_pm_rpm:5344) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5344) igt_debugfs-INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 edid_block_read+0x34/0xf0 _drm_do_get_edid+0xad/0x330 (i915_pm_rpm:5344) CRITICAL: Test assertion failure function pci_d3_state_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1887: (i915_pm_rpm:5344) CRITICAL: Failed assertion: wait_for_suspended() (i915_pm_rpm:5344) igt_core-INFO: Stack trace: (i915_pm_rpm:5344) igt_core-INFO: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() (i915_pm_rpm:5344) igt_core-INFO: #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1882 __igt_unique____real_main2421() (i915_pm_rpm:5344) igt_core-INFO: #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() (i915_pm_rpm:5344) igt_core-INFO: #3 [__libc_start_main+0xf3] (i915_pm_rpm:5344) igt_core-INFO: #4 [_start+0x2e] END ** Subtest basic-pci-d3-state: FAIL (10.761s)
Dmesg	<6> [131.242829] Console: switching to colour dummy device 80x25 <6> [131.243193] [IGT] i915_pm_rpm: executing <7> [131.246625] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [131.247029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [131.247049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [131.247427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.247548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.247861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.247999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.248007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.248146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [131.251017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.251021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [131.251155] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [131.251232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [131.251245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [131.264408] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [131.264414] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [131.264644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [131.264777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [131.265091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [131.265239] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.265456] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [131.265471] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [131.265475] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [131.265479] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [131.265482] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [131.265486] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [131.265489] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [131.265492] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [131.265495] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [131.265498] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [131.265502] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [131.265505] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [131.265508] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [131.265554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [131.265568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [131.265707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [131.265766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [131.265778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [131.266153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.266300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [131.266616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.266752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.266756] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.266873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [131.269689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.269694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [131.269815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [131.269881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [131.269894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [131.270608] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [131.271153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [131.271956] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [131.271968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [131.272092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [131.272228] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [131.272357] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [131.277708] EDID block 0 is all zeroes <7> [131.277711] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [131.277715] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277717] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277719] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277721] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277723] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277727] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.277734] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [131.277865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [131.278562] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.278684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [131.279295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [131.279310] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [131.279315] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [131.279318] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [131.279322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [131.279325] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [131.283202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [131.283219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [131.283558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.283678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.283975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.284110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.284132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.284304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [131.287191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.287196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [131.287320] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [131.287941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [131.287955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [131.288093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [131.288859] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [131.288880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [131.289228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.289348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [131.289646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.289833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.289839] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.290012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [131.292908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.292913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [131.293036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [131.293842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [131.293858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [131.294205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.294325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [131.294627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [131.294817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.294822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.294996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [131.297883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [131.297889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [131.298011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [131.298038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [131.298051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [131.311215] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [131.311221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [131.311437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [131.311560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [131.311859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [131.311993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [131.312251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [131.312270] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [131.312277] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [131.312282] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [131.312287] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [131.312292] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [131.312297] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [131.312302] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [131.312307] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [131.312312] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [131.312317] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [131.312322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [131.312327] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [131.312361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [131.312380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [131.312575] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [131.312612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [131.312630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [131.313028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.313217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [131.313580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [131.313721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.313725] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [131.313842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [131.316686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [131.316691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [131.316816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [131.316843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [131.316856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [131.317602] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [131.318224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [131.319078] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [131.319095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [131.319284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [131.319413] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [131.319533] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [131.324960] EDID block 0 is all zeroes <7> [131.324964] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [131.324969] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324971] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324972] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324974] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324976] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324977] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324979] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324981] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.324987] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [131.325110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [131.325874] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [131.326030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [131.326694] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [131.326714] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [131.326720] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [131.326726] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [131.326731] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [131.326736] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [131.327317] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:125] <7> [132.359389] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [132.359734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [132.360495] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [132.361187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [132.361973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [132.362657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [132.363241] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [132.363408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.363540] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [132.363672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.363809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.363941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.364072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.364211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0) <7> [132.364342] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0) <7> [132.364473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0) <7> [132.364631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0) <7> [132.364769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0) <7> [132.364900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0) <7> [132.365032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [132.365177] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [132.365310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [132.365441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [132.365573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [132.365703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [132.365832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0) <7> [132.366008] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0) <7> [132.366202] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0) <7> [132.366390] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0) <7> [132.366577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0) <7> [132.366765] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0) <7> [132.366952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [132.367149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [132.367331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [132.367465] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [132.367597] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0) <7> [132.367730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0) <7> [132.367870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0) <7> [132.368001] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [132.368156] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1 <7> [132.368306] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [132.368440] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x1, ddb (669 - 892) -> (0 - 892), active pipes 0x3 -> 0x2 <7> [132.368599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0 <7> [132.368768] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0 <7> [132.368947] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.369141] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.369321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.369503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.369684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 860), size 208 -> 860 <7> [132.369856] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 860 - 892), size 15 -> 32 <7> [132.370000] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [132.370147] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [132.370285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [132.370423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [132.370554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [132.370684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [132.370926] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [132.375184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [132.375334] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [132.375479] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 <7> [132.375616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [132.375744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [132.375877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [132.376003] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [132.376150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [132.376334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [132.376518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [132.376700] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [132.376898] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [132.377097] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [132.377263] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [132.377399] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [132.381580] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [132.381774] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [132.381999] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [132.382055] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0) <7> [132.382218] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0) <7> [132.382411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1) <7> [132.382601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0) <7> [132.382791] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0) <7> [132.382981] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000) <7> [132.383141] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [132.383275] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0) <7> [132.383407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0) <7> [132.383543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0) <7> [132.383675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0) <7> [132.383806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0) <7> [132.383937] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0) <7> [132.384068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0) <7> [132.384214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0) <7> [132.384401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0) <7> [132.384590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0) <7> [132.384780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0) <7> [132.384967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0) <7> [132.385165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0) <7> [132.385348] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0) <7> [132.385480] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0) <7> [132.385612] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0) <7> [132.385743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0) <7> [132.385882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0) <7> [132.386013] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0) <7> [132.386157] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0) <7> [132.386288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0) <7> [132.386419] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0) <7> [132.386549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0) <7> [132.386690] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0) <7> [132.386877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [132.387065] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [132.387268] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [132.387458] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [132.387646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0) <7> [132.387822] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0) <7> [132.387956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0) <7> [132.388088] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [132.388243] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2 <7> [132.388398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [132.388543] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0 <7> [132.388668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0 <7> [132.388792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [132.388915] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.389039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.389209] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [132.389414] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [132.389604] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [132.389794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset] <7> [132.389982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no <7> [132.390159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [132.390292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [132.390503] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B <7> [132.400377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [132.400534] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B] <7> [132.400686] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2 <7> [132.400833] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [132.400971] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [132.401108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [132.401255] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [132.401438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [132.401619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [132.401801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [132.401993] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [132.402203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [132.402357] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [132.402492] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [132.402627] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [132.402789] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [132.403012] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [132.434043] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000 <7> [132.434190] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short <7> [132.434337] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short <7> [132.435039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [132.435623] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [132.436427] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [132.588191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [132.588730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [132.589050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.589397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.590099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.591301] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.595421] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.598131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [132.706424] [IGT] i915_pm_rpm: starting subtest basic-pci-d3-state <7> [132.735866] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [132.748354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.763685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [132.765109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.765713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.766211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [132.766918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.767688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [132.768183] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.768647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.769522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.770983] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.772027] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [132.773307] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.779655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.804306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.814010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [132.814745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.815097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.815545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [132.816338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.817190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [132.817729] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.818290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.819243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.819831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.820659] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [132.820732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [132.821424] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.828724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.853552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.862306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [132.862892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.863188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.864520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [132.864767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [132.865182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [132.865624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [132.865634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [132.865813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [132.879255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [132.879264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [132.879448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.880100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.881026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.881988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [132.886766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.911252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.916782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [132.917372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.917661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.917924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [132.918434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [132.919059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [132.919368] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [132.919692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [132.920367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.920704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.921724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [132.922315] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.926140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [132.950654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [132.959452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [132.960096] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [132.960348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [132.975745] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [132.975764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [132.976713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [132.977055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [132.977857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [132.978472] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [132.978504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [132.978923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [132.979928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [132.980372] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [132.981898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [132.987495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.012218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.018180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.018670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.018799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.019447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.019665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.020137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [133.020499] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.021508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [133.024311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.048691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.053762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.054324] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.054486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.055546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.055759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [133.056413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.056910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.056919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.057171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [133.071142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.071150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [133.071392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.071691] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.072630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [133.073053] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.074078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [133.076998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.101414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.110522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.111097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.111298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.111879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.112397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.114608] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [133.115360] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [133.116430] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [133.116452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [133.116685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [133.116910] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [133.117154] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [133.123176] EDID block 0 is all zeroes <7> [133.123183] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [133.123194] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123198] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123202] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123205] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123209] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123220] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.123235] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [133.123464] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [133.124396] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.124624] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [133.125392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.125763] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.126015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.126682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.126965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.127878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [133.127920] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.129005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.131882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.156277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.161318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.161779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.161865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.162775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.162897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.163436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.163859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.163864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.164006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.176917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.176922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.177046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.177210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.178033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [133.178057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.178986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [133.181440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.205786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.210787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.211283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.211400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.225477] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [133.225486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [133.226348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.226492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.226815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.227218] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.227234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.227451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.228343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [133.228372] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.229295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [133.232047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.256386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.261874] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.262380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.262509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.262959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.263183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.263507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [133.263901] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.264921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [133.267450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.291804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.299979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.300571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.300752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.301827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.302111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [133.302851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.303479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.303494] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.303789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [133.318762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.318773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [133.319038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.319390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.320334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [133.320754] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.322304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [133.327757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.352226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.360851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.361446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.361646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.362238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.362773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.364106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [133.364892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [133.365987] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [133.366011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [133.366289] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [133.366536] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [133.366783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [133.373084] EDID block 0 is all zeroes <7> [133.373092] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [133.373102] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373107] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373111] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373143] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373147] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373151] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373155] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373159] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.373176] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [133.373428] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [133.374413] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.374663] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [133.375467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.375755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.376032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.376724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.377035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.377983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [133.378414] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.379482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.384962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.409329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.413801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.414285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.414383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.415311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.415470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.416037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.416498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.416503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.416620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.429565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.429570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.429693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.429845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.430677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [133.430700] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.431628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [133.434370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.458724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.463243] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.463706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.463812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.478336] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [133.478344] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [133.478942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.479076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.479775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.480230] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.480244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.480432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.481275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [133.481301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.482230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [133.483662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.508033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.512767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.513247] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.513354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.513770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.513948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.514323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [133.514361] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.515299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [133.518043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.542383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.548751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.549302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.549440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.550150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.550346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [133.551023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.551542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.551551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.551788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [133.565792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.565802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [133.566028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.566329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.567241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [133.567282] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.568308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [133.571086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.595574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.604501] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.605077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.605278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.605819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.606340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.607720] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [133.608449] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [133.609740] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [133.609764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [133.609996] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [133.610235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [133.610457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [133.616432] EDID block 0 is all zeroes <7> [133.616439] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [133.616449] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616453] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616457] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616461] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616464] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616468] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616472] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616475] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.616489] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [133.616717] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [133.617644] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.617870] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [133.618645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.618916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.619209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.619850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.620144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.621044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [133.621085] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.622098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.624944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.649273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.654249] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.654711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.654808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.655728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.655859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.656412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.656865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.656869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.656997] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.669884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.669888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.670019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.670191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.671027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [133.671051] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.671987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [133.674471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.698831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.707642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.708735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.709265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.725161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [133.725195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [133.726093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.726738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.727814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.728693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.728749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.729521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.731086] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.732716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [133.732801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [133.738473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.762913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.768363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.768825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.768930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.769365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.769551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.769981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [133.770371] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.771361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [133.772830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.797197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.803613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.804160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.804308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.805323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.805518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [133.805896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [133.806360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.806367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.806557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [133.819998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [133.820005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [133.820204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.820432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.821310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [133.821344] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.822279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [133.825099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.849490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.854474] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.855005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.855173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.855672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [133.856153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [133.857350] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [133.858054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [133.859159] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [133.859181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [133.859391] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [133.859596] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [133.859799] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [133.865682] EDID block 0 is all zeroes <7> [133.865689] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [133.865699] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865706] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865710] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865714] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865717] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865720] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865727] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.865740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [133.865950] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [133.866893] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [133.867102] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [133.867862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [133.868099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [133.868352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [133.869013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.869287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.870237] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [133.870280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.871339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [133.874145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.898467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.903456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.903899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.903997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.904613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.904735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [133.905286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [133.905737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.905743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [133.905860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [133.918728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [133.918732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [133.918853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.919003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.919835] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [133.919859] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.920786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [133.922157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.946467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [133.951870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [133.952414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [133.952530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [133.966879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [133.966887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [133.967369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.967513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [133.967835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [133.968237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [133.968252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [133.968428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [133.969273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [133.969301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [133.970232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [133.971684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [133.996052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.002028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.002508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.002624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.003055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.003261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.003605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [134.003999] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.005260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [134.008010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.032257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.037292] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.037832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.037992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.039074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.039294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [134.040039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.040509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.040520] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.040748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [134.054206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.054214] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [134.054410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.054656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.055549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [134.055585] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.056626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [134.059403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.083811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.089687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.090281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.090505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.091038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.091536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.092909] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [134.093652] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [134.094744] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [134.094767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [134.094994] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [134.095246] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [134.095533] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [134.101613] EDID block 0 is all zeroes <7> [134.101620] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [134.101630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101634] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101641] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101645] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101649] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101652] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101656] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.101670] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [134.101898] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [134.102881] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.103110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [134.103931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.104222] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.104472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.105130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.105464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.106386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [134.106806] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.107919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [134.113072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.137466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.142403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.142864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.142962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.143581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.143703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [134.144253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.144706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.144712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.144850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [134.157718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.157724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [134.157846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.157997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.158829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [134.158853] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.159798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [134.162473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.186836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.191806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.192295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.192448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.206893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [134.206902] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [134.207137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.207321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.207645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.208042] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [134.208057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.208294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.209181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [134.209219] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.210140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [134.212931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.237322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.243720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.244269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.244408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.244859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.245058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.245499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [134.245882] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.246920] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [134.249484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.273856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.281799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.282440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.282652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.283801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.284087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [134.284834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.285423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.285438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.285759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [134.300294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.300306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [134.300570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.300898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.301845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [134.302275] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.303415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [134.308970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.333493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.342674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.343784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.344100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.344764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.345426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.346948] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [134.347858] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [134.349194] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [134.349227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [134.349549] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [134.349862] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [134.350198] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [134.357200] EDID block 0 is all zeroes <7> [134.357209] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [134.357223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.357279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [134.357597] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [134.358783] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.359104] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [134.360153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.360517] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.360866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.361639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.362096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.363516] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.365008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [134.365154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [134.368069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.392413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.397827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.398368] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.398480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.399418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.399573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [134.400128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.400578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.400583] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.400713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [134.413620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.413625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [134.413747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.413900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.414732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [134.414756] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.415701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [134.417133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.441438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.445838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.446321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.446436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.460444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [134.460451] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [134.461324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.461478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.462024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.462485] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [134.462504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.462682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.463514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [134.463541] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.464466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [134.465771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.490113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.495121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.495585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.495682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.496084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.496260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.496638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [134.497030] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.498033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [134.500472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.524819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.530698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.531221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.531401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.532068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.532259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [134.532674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.533103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.533109] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.533293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [134.546737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.546744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [134.546919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.547149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.548048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [134.548082] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.549056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [134.551880] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.576292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.581780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.582371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.582596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.583150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.583704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.584985] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [134.585734] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [134.586805] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [134.586828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [134.587057] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [134.587310] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [134.587569] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [134.593758] EDID block 0 is all zeroes <7> [134.593765] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [134.593775] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593779] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593783] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593787] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593790] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593794] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593798] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593801] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.593815] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [134.594043] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [134.595032] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.595284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [134.596103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.596389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.596701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.597357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.597684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.598599] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [134.599026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.600109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [134.602920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.627279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.630942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.631428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.631542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.632473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.632620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [134.633171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.633624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.633630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.633768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [134.646636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.646642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [134.646763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.646914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.647745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [134.647769] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.648706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [134.650094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.674384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.677578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.678046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.678155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.692322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [134.692329] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [134.693202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.693351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.693895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.694365] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [134.694377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.694562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.695392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [134.695417] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.696343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [134.697791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.722150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.725817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.726297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.726410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.726815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.726968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.727320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [134.727353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.728267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [134.729737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.754087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.760561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.761095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.761253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.761721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.761878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [134.762459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.762920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.762926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.763078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [134.776090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.776096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [134.776267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.776497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.777357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [134.777391] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.778331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [134.779808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.804198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.810656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.811205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.811380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.811848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [134.812316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [134.813492] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [134.814173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [134.815163] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [134.815188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [134.815401] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [134.815575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [134.815746] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [134.821219] EDID block 0 is all zeroes <7> [134.821225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [134.821232] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.821263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [134.821441] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [134.822277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [134.822486] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [134.823158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [134.823395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [134.823591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [134.824189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.824463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.825338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [134.825378] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.826372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [134.829165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.853487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.857845] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.858326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.858441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.859372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.859520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [134.860064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [134.860526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.860533] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.860674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [134.873580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [134.873585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [134.873706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.873857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.874690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [134.874715] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.875655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [134.877054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.901397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.904575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.905045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.905153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.919282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [134.919288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [134.920161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.920317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [134.920862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [134.921332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [134.921345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.921520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.922351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [134.922380] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.923302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [134.924712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.949052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.952671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.953209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.953325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.953729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [134.953881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [134.954234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [134.954268] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [134.955182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [134.956650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [134.981000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [134.986274] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [134.986790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [134.986917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [134.987928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.988092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [134.988685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [134.989097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [134.989104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [134.989268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [135.002292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.002299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [135.002456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.002652] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.003513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [135.003542] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.004486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [135.007307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.031680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.036921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.037469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.037628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.038153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.038665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.039892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [135.040614] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [135.041646] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [135.041666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [135.041864] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [135.042060] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [135.042281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [135.048098] EDID block 0 is all zeroes <7> [135.048104] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [135.048113] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048141] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048145] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048148] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048152] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048155] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048159] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048162] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.048175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [135.048452] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [135.049337] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.049537] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [135.050257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.050496] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.050716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.051340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.051626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.052518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [135.052561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.053645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.056184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.080529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.084840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.085321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.085437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.086368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.086515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.087060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.087522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.087529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.087670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.100583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.100588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.100709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.100860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.101692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [135.101715] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.102661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [135.104083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.128386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.132840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.133321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.133435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.147895] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [135.147903] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [135.148131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.148285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.148877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.149348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [135.149361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.149539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.150371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [135.150400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.151325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [135.152738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.177082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.181927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.182469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.182586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.182988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.183150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.183535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [135.183933] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.184931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [135.186156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.210445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.216443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.216932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.217060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.218029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.218200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [135.218570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.218982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.218988] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.219155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [135.232192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.232199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [135.232358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.232554] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.233416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [135.233448] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.234390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [135.237130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.261482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.266776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.267329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.267525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.268021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.268490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.269733] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [135.270454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [135.271479] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [135.271498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [135.271698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [135.271895] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [135.272091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [135.277840] EDID block 0 is all zeroes <7> [135.277847] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [135.277856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277860] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277863] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277866] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277870] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277873] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277876] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277879] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.277891] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [135.278091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [135.279023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.279245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [135.279985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.280232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.280506] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.281136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.281420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.282313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [135.282353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.283385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.286147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.310491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.316296] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.316754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.316840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.317448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.317570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.318112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.318574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.318581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.318728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.331635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.331640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.331761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.331913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.332747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [135.332771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.333707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [135.335137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.359484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.363841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.364321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.364436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.378446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [135.378453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [135.379326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.379481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.380026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.380488] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [135.380507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.380677] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.381538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [135.381565] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.382459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [135.383771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.408114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.411677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.412706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.412794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.413216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.413404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.413815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [135.414207] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.415189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [135.416657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.441007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.446654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.447157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.447321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.447959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.448130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [135.448548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.448959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.448965] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.449130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [135.462147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.462154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [135.462310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.462507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.463369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [135.463400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.464342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [135.467168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.491541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.496603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.497158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.497365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.497855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.498327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.499584] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [135.500294] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [135.501318] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [135.501339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [135.501540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [135.501736] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [135.501930] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [135.507797] EDID block 0 is all zeroes <7> [135.507804] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [135.507812] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507816] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507819] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.507848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [135.508047] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [135.508962] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.509182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [135.509920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.510167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.510426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.511034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.511294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.512239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [135.512281] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.513307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.516168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.540514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.545435] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.545879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.545977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.546598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.546720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.547275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.547726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.547731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.547860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.560766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.560772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.560893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.561045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.561880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [135.561904] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.562849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [135.564167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.588441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.591579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.592047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.592154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.606354] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [135.606361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [135.607228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.607377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.607922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.608394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [135.608406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.608582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.609418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [135.609448] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.610369] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [135.611803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.636161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.640681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.641162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.641286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.641682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.641834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.642185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [135.642214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.643148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [135.644614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.668964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.674728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.675215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.675364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.676311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.676523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [135.676863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.677285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.677292] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.677480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [135.690468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.690475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [135.690635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.690831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.691692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [135.691722] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.692671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [135.695482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.719861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.724763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.725292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.725466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.725950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.726406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.727606] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [135.728277] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [135.729235] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [135.729259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [135.729438] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [135.729611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [135.729783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [135.735391] EDID block 0 is all zeroes <7> [135.735397] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [135.735405] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735408] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735411] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735417] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735420] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.735436] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [135.735613] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [135.736440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.736618] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [135.737273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.737477] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.737672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.738272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.738530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.739401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [135.739445] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.740447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.743184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.767511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.771879] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.772357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.772473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.773406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.773552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [135.774096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [135.774558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.774565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.774713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [135.787618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [135.787623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [135.787745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.787896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.788729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [135.788752] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.789690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [135.791112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.815479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.819862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.820342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.820457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.834987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [135.834993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [135.835489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.835637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [135.836187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [135.836640] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [135.836653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.836804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.837635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [135.837663] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.838594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [135.839995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.864344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.868016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.868490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.868587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.868989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.869162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.869539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [135.869935] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.870933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [135.872156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.896462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.901898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.902405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.902560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.903564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.903752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [135.904343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [135.904796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.904802] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [135.904971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [135.917951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [135.917958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [135.918131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.918360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.919221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [135.919256] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.920203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [135.922987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.947377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [135.952769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [135.953322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [135.953520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [135.954015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [135.954482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [135.955745] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [135.956449] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [135.957478] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [135.957498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [135.957699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [135.957897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [135.958091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [135.963914] EDID block 0 is all zeroes <7> [135.963921] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [135.963929] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963933] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963936] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963940] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963943] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963946] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963949] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963952] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.963964] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [135.964195] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [135.965140] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [135.965381] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [135.966079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [135.966331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [135.966610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [135.967235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [135.967520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [135.968414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [135.968459] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [135.969494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [135.972322] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [135.996666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.001392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.001852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.001949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.002568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.002691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [136.003241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.003694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.003700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.003841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [136.016717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.016722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [136.016843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.016994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.017827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [136.017852] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.018793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [136.020132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.044427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.049484] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.049941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.050048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.064187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [136.064194] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [136.065049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.065196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [136.065537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.065922] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [136.065936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.066100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.066942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [136.066969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.067918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [136.070443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.094807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.099783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.100263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.100402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.100808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.100974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.101334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [136.101361] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.102308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [136.105076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.129389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.135831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.136398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.136595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.137647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.137850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [136.138507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.138975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.138983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.139192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [136.152709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.152718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [136.152915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.153179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.154130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [136.154168] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.155169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [136.158051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.182462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.190182] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.190756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.190938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.191566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [136.192174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.193604] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [136.194378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [136.195562] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [136.195589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [136.195855] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [136.196134] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [136.196453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [136.202930] EDID block 0 is all zeroes <7> [136.202938] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [136.202949] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202954] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202959] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202963] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202968] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202972] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202976] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202980] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.202996] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [136.203297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [136.204409] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.204676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [136.205557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [136.205861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.206169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.206905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.207253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.208282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [136.208699] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.210278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [136.213164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.237584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.243492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.243953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.244051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.244983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.245105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [136.245653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.246029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.246034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.246163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [136.259079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.259084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [136.259216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.259392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.260223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [136.260251] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.261212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [136.263967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.288276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.293341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.293804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.293910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.308109] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [136.308123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [136.308975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.309107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [136.309437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.309830] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [136.309844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.310009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.310850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [136.310883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.311820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [136.314476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.338840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.343304] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.343767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.343874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.344302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.344506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.344856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [136.344881] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.345832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [136.348472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.372832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.377751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.378279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.378466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.379146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.379358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [136.379714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.380154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.380161] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.380385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [136.393855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.393864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [136.394060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.394325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.395264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [136.395308] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.396303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [136.399155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.423559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.430022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.430594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.430751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.431299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [136.431846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.433181] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [136.433901] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [136.434989] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [136.435012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [136.435264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [136.435534] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [136.435757] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [136.441876] EDID block 0 is all zeroes <7> [136.441883] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [136.441893] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441898] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441901] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441905] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441909] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441913] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441916] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441920] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.441933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [136.442193] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [136.443190] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.443457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [136.444226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [136.444566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.444828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.445486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.445813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.446731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [136.447174] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.448674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [136.451443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.475752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.480762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.481254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.481394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.482059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.482224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [136.482646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.483076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.483083] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.483271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [136.496761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.496768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [136.496948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.497178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.498059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [136.498093] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.499036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [136.501795] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.526210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.530756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.531242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.531382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.545424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [136.545431] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [136.545993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.546130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [136.546493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.546923] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [136.546942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.547171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.548053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [136.548087] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.549033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [136.550505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.574893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.579770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.580265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.580404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.580861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.581082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.581538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [136.581916] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.582944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [136.585420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.609808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.614787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.615275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.615426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.616420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.616611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [136.616990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.617453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.617461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.617647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [136.631591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.631599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [136.631791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.632025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.632932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [136.632968] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.633916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [136.636422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.660779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.665759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.666253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.666394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.666854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [136.667322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.668490] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [136.669163] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [136.670147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [136.670165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [136.670343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [136.670519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [136.670697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [136.676222] EDID block 0 is all zeroes <7> [136.676227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [136.676235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.676274] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [136.676451] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [136.677284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.677462] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [136.678141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [136.678342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.678535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.679132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.679353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.680241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [136.680274] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.681249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [136.683953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.708271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.712801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.713288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.713428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.714093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.714286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [136.714704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.715147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.715155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.715326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [136.729236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.729244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [136.729421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.729636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.730528] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [136.730561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.731510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [136.734071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.758425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.762878] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.763361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.763501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.777413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [136.777420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [136.778289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.778466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [136.778828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [136.779271] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [136.779291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.779507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.780398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [136.780432] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.781380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [136.784068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.808393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.812850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.813336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.813475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.813931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.814167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.814500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [136.814870] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.815898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [136.817128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.841467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.846836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.847326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.847478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.848488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.848677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [136.849058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [136.849522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.849530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.849716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [136.863696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [136.863704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [136.863896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.864148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.865040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [136.865077] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.866037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [136.867534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.891929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.896770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.897264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.897404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.897863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [136.898330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [136.899510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [136.900167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [136.901153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [136.901171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [136.901351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [136.901526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [136.901700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [136.907230] EDID block 0 is all zeroes <7> [136.907236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [136.907244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.907282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [136.907460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [136.908292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [136.908470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [136.909151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [136.909352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [136.909546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [136.910138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.910357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.911246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [136.911280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.912254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [136.913670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.937976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.942770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.943264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.943403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [136.944068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.944264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [136.944681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [136.945112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.945135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [136.945307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [136.959218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [136.959226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [136.959403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [136.959619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [136.960512] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [136.960546] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [136.961486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [136.962947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [136.987344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [136.992389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [136.992849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [136.992947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.006982] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [137.006989] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [137.007580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.007758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [137.008132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.008567] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [137.008586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.008802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.009693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [137.009727] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.010674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [137.013395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.037798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.042773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.043264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.043403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.043859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.044081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.044540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [137.044930] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.045958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [137.047501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.071891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.077733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.078210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.078363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.079359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.079549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [137.079929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.080389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.080398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.080584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [137.094530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.094538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [137.094731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.094965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.095870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [137.095906] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.096874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [137.099416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.123812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.128763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.129257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.129397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.129857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [137.130327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.131489] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [137.132166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [137.133155] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [137.133173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [137.133350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [137.133525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [137.133701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [137.139309] EDID block 0 is all zeroes <7> [137.139315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [137.139324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139332] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139336] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139347] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.139362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [137.139540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [137.140373] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.140551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [137.141213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [137.141413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.141606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.142201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.142421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.143312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [137.143346] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.144323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [137.147029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.171313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.176389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.176833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.176930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.177552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.177728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [137.178090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.178528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.178535] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.178666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [137.192541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.192549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [137.192726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.192941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.193835] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [137.193868] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.194813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [137.197416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.221814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.226769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.227264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.227404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.241783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [137.241790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [137.242258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.242435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [137.242798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.243245] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [137.243264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.243480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.244371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [137.244405] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.245355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [137.246780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.271164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.275720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.276207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.276347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.276802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.277021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.277493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [137.277869] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.278897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [137.280600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.304986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.309789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.310275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.310425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.311420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.311578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [137.311933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.312393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.312401] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.312588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [137.326507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.326516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [137.326709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.326943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.327851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [137.327887] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.328841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [137.331424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.355824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.360770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.361258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.361399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.361858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [137.362324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.363505] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [137.364166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [137.365153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [137.365171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [137.365351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [137.365529] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [137.365704] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [137.371230] EDID block 0 is all zeroes <7> [137.371236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [137.371244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.371283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [137.371461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [137.372296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.372475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [137.373153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [137.373328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.373494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.374077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.374310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.375200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [137.375228] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.376210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [137.377626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.401922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.406769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.407259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.407400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.408065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.408218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [137.408639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.409069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.409076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.409266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [137.423177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.423185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [137.423364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.423580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.424496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [137.424903] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.425931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [137.427133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.451468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.456363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.456824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.456922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.471107] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [137.471116] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [137.471694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.471873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [137.472464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.472948] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [137.472967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.473197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.474078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [137.474112] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.475061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [137.476533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.500933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.505769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.506264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.506404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.506858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.507078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.507544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [137.507923] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.508951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [137.510130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.534491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.539844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.540334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.540475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.541437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.541576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [137.541924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.542368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.542375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.542550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [137.556058] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.556066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [137.556259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.556475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.557364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [137.557398] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.558347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [137.559780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.584179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.588778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.589267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.589405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.589865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [137.590333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.591491] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [137.592169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [137.593159] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [137.593177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [137.593355] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [137.593531] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [137.593705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [137.599310] EDID block 0 is all zeroes <7> [137.599315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [137.599324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599331] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599346] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.599362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [137.599540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [137.600378] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.600556] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [137.601222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [137.601422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.601615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.602214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.602433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.603323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [137.603358] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.604335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [137.605750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.630047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.635008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.635537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.635636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.636585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.636761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [137.637375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.637830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.637837] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.638011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [137.651938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.651946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [137.652138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.652355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.653244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [137.653278] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.654228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [137.655688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.680072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.685105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.685637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.685722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.699879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [137.699886] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [137.700477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.700657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [137.701018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.701464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [137.701483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.701698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.702586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [137.702620] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.703570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [137.705031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.728387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.732032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.732501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.732587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.732978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.733153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.733537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [137.733924] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.734945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [137.737420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.761810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.766787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.767273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.767423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.768447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.768588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [137.768966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.769432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.769440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.769628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [137.783579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.783588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [137.783780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.784013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.784918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [137.784954] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.785911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [137.788420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.812818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.817771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.818258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.818399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.818856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [137.819324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [137.820488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [137.821161] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [137.822146] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [137.822164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [137.822343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [137.822518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [137.822693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [137.828227] EDID block 0 is all zeroes <7> [137.828233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [137.828241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.828279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [137.828456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [137.829288] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [137.829465] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [137.830141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [137.830340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [137.830532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [137.831129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.831349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.832237] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [137.832271] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.833246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [137.834661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.858958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.863759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.864260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.864401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.865067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.865230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [137.865652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [137.866082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.866090] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.866278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [137.879767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [137.879775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [137.879953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.880185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.881066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [137.881100] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.882049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [137.883520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.907922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.912769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.913261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.913400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.927412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [137.927419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [137.928296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.928473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [137.928836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [137.929280] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [137.929299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.929488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.930331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [137.930365] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.931307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [137.932764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.957157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.962186] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.962709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.962795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.963207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [137.963426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [137.963896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [137.964279] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [137.965299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [137.966761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [137.991153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [137.996181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [137.996705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [137.996791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [137.997405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.997583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [137.997945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [137.998391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [137.998398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [137.998570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [138.012512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.012520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [138.012697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.012911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.013802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [138.013836] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.014781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [138.016126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.040498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.044880] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.045362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.045503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.045962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.046415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.047577] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [138.048251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [138.049227] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [138.049245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [138.049424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [138.049600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [138.049774] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [138.055401] EDID block 0 is all zeroes <7> [138.055407] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [138.055415] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055419] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055423] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055427] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055431] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055434] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055438] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055442] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.055454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [138.055631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [138.056481] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.056657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [138.057336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.057537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.057731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.058328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.058548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.059434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [138.059468] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.060444] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.061783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.086092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.091130] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.091656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.091740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.092352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.092527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [138.092889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.093333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.093340] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.093513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [138.107451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.107458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [138.107636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.107852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.108745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [138.108779] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.109722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [138.111129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.135461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.140456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.140898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.140983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.155124] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [138.155140] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [138.155992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.156134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [138.156497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.156928] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [138.156947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.157139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.158021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [138.158054] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.158996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [138.160468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.184864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.189768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.190259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.190400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.190855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.191074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.191533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [138.191922] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.192950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [138.194130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.218516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.222840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.223326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.223465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.224145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.224322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [138.224683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.225129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.225136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.225309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [138.239220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.239227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [138.239404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.239620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.240509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [138.240543] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.241490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [138.242953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.267365] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.271009] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.271484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.271568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.271961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.272437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.273579] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [138.274255] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [138.275228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [138.275246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [138.275425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [138.275603] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [138.275777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [138.281400] EDID block 0 is all zeroes <7> [138.281406] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [138.281414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281418] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281426] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281430] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281433] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281437] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281441] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.281453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [138.281631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [138.282466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.282645] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [138.283309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.283509] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.283704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.284299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.284517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.285407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [138.285441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.286416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.287783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.312090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.317133] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.317657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.317742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.318354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.318531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [138.318894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.319339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.319344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.319515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [138.333446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.333454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [138.333631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.333848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.334739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [138.334773] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.335717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [138.337110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.361474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.366456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.366902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.367000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.381066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [138.381073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [138.381667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.381845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [138.382206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.382635] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [138.382653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.382869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.383760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [138.383794] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.384742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [138.386130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.410482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.414844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.415331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.415471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.415927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.416164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.416495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [138.416867] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.417895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [138.419129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.443475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.448841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.449331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.449483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.450485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.450678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [138.451056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.451522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.451530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.451716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [138.465714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.465723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [138.465915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.466166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.467057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [138.467094] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.468048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [138.469542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.493953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.498774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.499266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.499406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.499865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.500331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.501512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [138.502167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [138.503150] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [138.503168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [138.503346] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [138.503524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [138.503698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [138.509230] EDID block 0 is all zeroes <7> [138.509235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [138.509243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.509282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [138.509460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [138.510292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.510469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [138.511145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.511345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.511540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.512137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.512356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.513245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [138.513279] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.514253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.515669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.539968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.544770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.545261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.545401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.546065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.546225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [138.546645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.547077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.547084] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.547271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [138.560760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.560768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [138.560944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.561171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.562052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [138.562083] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.563033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [138.564504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.588902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.593768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.594260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.594400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.608413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [138.608420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [138.609299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.609477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [138.609839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.610287] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [138.610306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.610522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.611415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [138.611449] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.612389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [138.613782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.638181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.642781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.643269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.643407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.643864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.644083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.644529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [138.644918] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.645947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [138.647133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.671483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.676914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.677405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.677545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.678559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.678714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [138.679024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.679470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.679478] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.679650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [138.693563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.693570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [138.693748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.693962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.694855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [138.694888] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.695833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [138.697127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.721485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.726363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.726824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.726921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.727349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.727787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.728972] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [138.729646] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [138.730634] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [138.730652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [138.730832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [138.731007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [138.731195] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [138.736813] EDID block 0 is all zeroes <7> [138.736819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [138.736827] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736850] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736854] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.736866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [138.737044] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [138.737889] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.738067] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [138.738741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.738941] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.739147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.739730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.739948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.740838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [138.740872] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.741844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.743129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.767426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.772464] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.772906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.772990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.773621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.773796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [138.774408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [138.774870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.774877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.775049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [138.788981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [138.788989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [138.789183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.789398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.790290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [138.790324] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.791276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [138.792738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.817151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.821676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.822161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.822302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.836759] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [138.836766] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [138.837239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.837416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [138.837781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [138.838225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [138.838244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.838461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.839349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [138.839383] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.840332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [138.841779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.866177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.870730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.871216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.871356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.871812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.872033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.872494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [138.872883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.873912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [138.876416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.900803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.906729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.907232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.907385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.908380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.908573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [138.908952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [138.909420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.909428] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [138.909614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [138.924013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [138.924022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [138.924232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.924466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.925371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [138.925407] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.926381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [138.929073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.953436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [138.958461] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [138.958904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [138.959002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [138.959428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [138.959881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [138.961068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [138.961758] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [138.962727] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [138.962745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [138.962923] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [138.963097] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [138.963284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [138.968815] EDID block 0 is all zeroes <7> [138.968820] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [138.968829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968841] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968848] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968852] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.968868] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [138.969045] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [138.969895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [138.970071] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [138.970747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [138.970947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [138.971158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [138.971741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [138.971960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [138.972849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [138.972883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [138.973856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [138.975132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [138.999437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.003886] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.004370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.004509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.005517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.005657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [139.006000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.006446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.006454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.006630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [139.020527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.020535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [139.020712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.020927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.021820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [139.021854] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.022797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [139.024132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.048492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.053863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.054372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.054511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.068374] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [139.068381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [139.069250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.069427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [139.069790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.070234] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [139.070253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.070470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.071358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [139.071392] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.072340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [139.073780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.098178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.102775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.103266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.103405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.103861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.104080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.104552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [139.104931] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.105958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [139.108421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.132812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.137707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.138196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.138337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.139002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.139195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [139.139613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.140045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.140052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.140238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [139.153727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.153735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [139.153913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.154142] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.155024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [139.155057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.156006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [139.157478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.181877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.186784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.187279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.187419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.187878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [139.188345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [139.189519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [139.190165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [139.191154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [139.191172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [139.191349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [139.191524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [139.191698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [139.197231] EDID block 0 is all zeroes <7> [139.197237] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [139.197245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.197283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [139.197460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [139.198291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.198469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [139.199144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [139.199340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [139.199475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [139.200051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.200286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.201173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [139.201207] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.202184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [139.203600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.227899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.232776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.233267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.233407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.234072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.234235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [139.234656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.235087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.235094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.235281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [139.248771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.248779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [139.248956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.249191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.250072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [139.250103] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.251048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [139.252520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.276917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.281767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.282261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.282400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.296514] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [139.296521] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [139.297401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.297578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [139.297940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.298385] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [139.298404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.298622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.299515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [139.299549] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.300496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [139.301943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.326355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.330838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.331325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.331465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.331921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.332157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.332489] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [139.332860] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.333887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [139.335129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.359473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.364863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.365409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.365562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.366571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.366731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [139.367084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.367544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.367552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.367738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [139.381682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.381690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [139.381882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.382118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.383025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [139.383062] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.384018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [139.385509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.409905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.414771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.415266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.415405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.415864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [139.416330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [139.417494] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [139.418167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [139.419154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [139.419172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [139.419351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [139.419526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [139.419702] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [139.425228] EDID block 0 is all zeroes <7> [139.425234] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [139.425243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.425281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [139.425463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [139.426300] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.426480] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [139.427150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [139.427319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [139.427513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [139.428097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.428334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.429224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [139.429257] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.430232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [139.431647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.455946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.460766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.461259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.461399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.462064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.462257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [139.462676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.463105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.463112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.463302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [139.477212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.477220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [139.477398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.477613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.478505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [139.478539] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.479483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [139.480947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.505361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.508955] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.509500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.509637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.524179] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [139.524186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [139.524402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.524525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [139.524836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.525226] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [139.525245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.525461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.526351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [139.526386] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.527329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [139.528783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.553168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.558259] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.558720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.558806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.559219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.559438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.559908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [139.560289] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.561310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [139.562782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.587169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.590834] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.591293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.591431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.592095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.592287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [139.592706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.593149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.593156] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.593328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [139.606820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.606828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [139.607005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.607238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.608130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [139.608164] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.609101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [139.610576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.634973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.639774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.640265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.640405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.640863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [139.641329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [139.642512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [139.643167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [139.644147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [139.644165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [139.644343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [139.644517] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [139.644691] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [139.650232] EDID block 0 is all zeroes <7> [139.650238] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [139.650246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650265] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650273] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.650285] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [139.650463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [139.651296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.651473] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [139.652150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [139.652351] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [139.652545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [139.653142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.653363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.654252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [139.654286] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.655259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [139.656675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.680971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.685772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.686266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.686406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.687071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.687264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [139.687682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.688112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.688135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.688307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [139.702219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.702227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [139.702405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.702622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.703535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [139.703945] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.704972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [139.707422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.731817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.736787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.737279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.737418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.751537] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [139.751543] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [139.751996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.752135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [139.752499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.752930] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [139.752949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.753181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.754063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [139.754097] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.755045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [139.756517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.780913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.785773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.786263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.786403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.786859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.787079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.787559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [139.787927] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.788953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [139.791420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.815805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.820800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.821283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.821433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.822454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.822644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [139.823022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [139.823487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.823495] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.823682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [139.837653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [139.837662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [139.837856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.838091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.838996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [139.839032] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.839987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [139.841480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.865878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.870774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.871270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.871409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.871868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [139.872335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [139.873518] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [139.874166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [139.875149] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [139.875167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [139.875345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [139.875520] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [139.875697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [139.881229] EDID block 0 is all zeroes <7> [139.881235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [139.881243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.881282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [139.881459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [139.882293] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [139.882470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [139.883148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [139.883348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [139.883487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [139.884061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.884293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.885181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [139.885215] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.886192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [139.887606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.911903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.916782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.917273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.917413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.918078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.918233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [139.918655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [139.919086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.919093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [139.919280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [139.933190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [139.933198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [139.933375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.933591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.934483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [139.934517] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.935463] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [139.936780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [139.961184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [139.965783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [139.966271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [139.966408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [139.980936] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [139.980942] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [139.981409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.981585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [139.981947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [139.982394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [139.982414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [139.982631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [139.983523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [139.983557] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [139.984497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [139.985958] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.010363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.014008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.014482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.014566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.014956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.015109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.015525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [140.015912] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.016940] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [140.019423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.043813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.048784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.049272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.049423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.050416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.050607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [140.050989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.051453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.051461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.051649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [140.065638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.065646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [140.065839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.066074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.066981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [140.067017] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.067974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [140.070760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.095156] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.099687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.100175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.100315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.100773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.101240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.102407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [140.103080] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.104063] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [140.104080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [140.104270] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [140.104447] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [140.104621] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [140.110228] EDID block 0 is all zeroes <7> [140.110233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [140.110241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.110280] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [140.110457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.111290] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.111467] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.112144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.112344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.112538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.113137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.113356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.114246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [140.114280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.115255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [140.117961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.142270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.146795] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.147282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.147422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.148085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.148285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [140.149063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.149507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.149515] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.149688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.163612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.163620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.163798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.164014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.164908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [140.164943] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.165893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [140.168416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.192817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.197772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.198266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.198405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.212887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [140.212894] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [140.213363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.213541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.213903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.214349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [140.214369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.214583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.215528] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [140.215907] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.216935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [140.219422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.243809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.248792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.249280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.249421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.249877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.250096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.250555] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [140.250939] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.251967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [140.254421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.278810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.284723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.285226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.285392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.286409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.286581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [140.287211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.287681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.287690] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.287896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [140.302335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.302344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [140.302552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.302805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.303725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [140.303764] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.304737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [140.307425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.331836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.336769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.337264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.337403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.337863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.338334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.339515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [140.340167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.341153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [140.341171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [140.341349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [140.341526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [140.341701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [140.347231] EDID block 0 is all zeroes <7> [140.347237] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [140.347245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347272] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.347284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [140.347463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.348299] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.348477] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.349154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.349354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.349546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.350143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.350363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.351253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [140.351287] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.352267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [140.354971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.379283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.383807] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.384294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.384434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.385098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.385272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [140.385694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.386137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.386144] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.386316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.399807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.399815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.399992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.400225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.401104] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [140.401146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.402087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [140.403557] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.427029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.431711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.432198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.432337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.446489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [140.446496] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [140.447372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.447548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.448164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.448636] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [140.448655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.448871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.449761] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [140.449795] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.450742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [140.453415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.477819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.482770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.483263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.483402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.483860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.484080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.484547] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [140.484919] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.485947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [140.488420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.512813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.518745] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.519235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.519401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.520417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.520585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [140.521229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.521692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.521701] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.521903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [140.536329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.536338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [140.536547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.536803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.537743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [140.538156] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.539192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [140.541985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.566390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.570887] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.571371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.571511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.571971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.572424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.573578] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [140.574251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.575228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [140.575247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [140.575425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [140.575600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [140.575775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [140.581400] EDID block 0 is all zeroes <7> [140.581406] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [140.581414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581418] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581429] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581433] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581437] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581440] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.581452] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [140.581629] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.582463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.582640] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.583306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.583447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.583635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.584231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.584452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.585341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [140.585374] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.586350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [140.587765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.612065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.617032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.617506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.617604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.618562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.618738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [140.619354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.619804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.619811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.619983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.633900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.633908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.634086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.634319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.635210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [140.635245] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.636194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [140.637654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.662055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.667036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.667565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.667663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.681760] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [140.681767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [140.682361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.682539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.682901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.683328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [140.683348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.683564] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.684453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [140.684486] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.685433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [140.688069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.712259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.717260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.717708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.717806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.718231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.718452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.718851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [140.718885] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.719842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [140.722415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.746810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.751785] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.752268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.752420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.753413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.753603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [140.753980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.754441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.754449] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.754634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [140.768581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.768590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [140.768783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.769018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.769927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [140.769964] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.770918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [140.773421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.797823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.802774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.803263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.803403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.803862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [140.804328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [140.805509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [140.806167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [140.807154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [140.807172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [140.807350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [140.807526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [140.807700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [140.813297] EDID block 0 is all zeroes <7> [140.813302] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [140.813311] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813315] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813318] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813322] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813326] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813330] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813334] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813337] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.813349] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [140.813526] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [140.814336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [140.814514] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [140.815165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [140.815320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [140.815514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [140.816098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.816332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.817220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [140.817253] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.818229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [140.819643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.843941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.848775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.849266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.849406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.850071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.850236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [140.850658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [140.851088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.851095] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.851283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [140.864774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [140.864781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [140.864958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.865187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.866068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [140.866101] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.867043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [140.869804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.894199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.898748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.899235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.899374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.913410] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [140.913417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [140.913987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.914109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [140.914791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [140.915265] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [140.915285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.915502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.916391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [140.916425] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.917373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [140.918781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.943103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.947636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.948107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.948228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.948686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.948905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.949314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [140.949350] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.950295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [140.951757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [140.976167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [140.981198] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [140.981683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [140.981789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [140.982431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.982621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [140.982999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [140.983451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.983459] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [140.983647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [140.997619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [140.997628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [140.997821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [140.998052] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [140.998959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [140.998994] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [140.999946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [141.002429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.026829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.031796] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.032283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.032423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.032881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.033350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.034530] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [141.035169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [141.036154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [141.036172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [141.036353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [141.036528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [141.036703] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [141.042327] EDID block 0 is all zeroes <7> [141.042333] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [141.042341] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042345] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042349] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042353] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042357] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042361] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042364] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042368] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.042380] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [141.042557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [141.043392] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.043569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [141.044229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.044396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.044556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.045154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.045374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.046266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [141.046301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.047276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [141.048691] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.072992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.077719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.078209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.078349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.079014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.079183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [141.079604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.080036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.080043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.080231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [141.094175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.094183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [141.094361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.094576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.095472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [141.095506] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.096452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [141.099072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.123430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.128440] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.128883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.128981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.143079] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [141.143086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [141.143681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.143858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [141.144220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.144640] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [141.144658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.144875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.145765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [141.145799] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.146746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [141.149420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.173815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.178776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.179265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.179404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.179859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.180078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.180548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [141.180921] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.181947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [141.183131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.207461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.211916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.212391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.212542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.213574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.213765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [141.214157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.214604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.214611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.214798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [141.228768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.228777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [141.228972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.229224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.230146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.231102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [141.231166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [141.232579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.256975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.261769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.262260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.262400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.262859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.263325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.264497] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [141.265167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [141.266148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [141.266166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [141.266344] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [141.266519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [141.266694] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [141.272227] EDID block 0 is all zeroes <7> [141.272233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [141.272241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.272280] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [141.272458] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [141.273292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.273469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [141.274146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.274346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.274539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.275134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.275354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.276241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [141.276274] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.277251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [141.278666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.302964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.307773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.308261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.308401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.309064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.309255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [141.309674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.310106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.310113] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.310301] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [141.324221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.324229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [141.324407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.324623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.325542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [141.325946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.326964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [141.329421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.353821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.358771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.359265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.359404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.373373] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [141.373380] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [141.373942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.374064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [141.374777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.375225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [141.375244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.375462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.376354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [141.376388] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.377337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [141.380072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.404397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.409449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.409893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.409991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.410418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.410638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.411036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [141.411070] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.412018] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [141.413491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.437884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.442784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.443270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.443420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.444106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.444279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [141.444702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.445164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.445172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.445359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [141.459312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.459320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [141.459512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.459746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.460651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [141.460687] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.461642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [141.464376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.488787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.493762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.494254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.494393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.494852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.495319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.496477] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [141.497159] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [141.498148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [141.498165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [141.498345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [141.498519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [141.498693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [141.504228] EDID block 0 is all zeroes <7> [141.504234] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [141.504242] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504265] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.504281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [141.504459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [141.505292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.505471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [141.506139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.506310] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.506503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.507086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.507318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.508208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [141.508241] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.509215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [141.511919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.536225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.540784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.541270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.541411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.542075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.542237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [141.542659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.543091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.543098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.543286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [141.557205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.557213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [141.557390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.557605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.558519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [141.558929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.559956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [141.562420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.586811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.591773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.592263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.592403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.606332] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [141.606339] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [141.606901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.607024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [141.607744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.608188] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [141.608208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.608423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.609313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [141.609347] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.610295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [141.612999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.637397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.641844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.642331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.642471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.642927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.643164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.643478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [141.643866] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.644893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [141.646131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.670517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.675316] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.675843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.675949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.676586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.676777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [141.677168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.677614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.677621] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.677810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [141.691773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.691781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [141.691973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.692221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.693113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [141.693158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.694098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [141.696881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.721283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.725765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.726251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.726391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.726850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.727316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.728488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [141.729165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [141.730147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [141.730165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [141.730343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [141.730518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [141.730693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [141.736226] EDID block 0 is all zeroes <7> [141.736232] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [141.736240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.736278] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [141.736456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [141.737291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.737467] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [141.738145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.738336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.738473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.739055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.739288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.740177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [141.740211] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.741187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [141.742601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.766909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.771773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.772261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.772402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.773067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.773220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [141.773641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [141.774072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.774079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.774264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [141.788191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [141.788199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [141.788378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.788594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.789484] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [141.789518] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.790467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [141.793070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.817403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.822828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.823374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.823515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.838032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [141.838038] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [141.838542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.838719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [141.839080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [141.839526] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [141.839546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.839762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.840651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [141.840684] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.841632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [141.843106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.867440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.872443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.872886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.872985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.873410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.873632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.874029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [141.874063] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.875009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [141.876480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.900863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.905313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.905776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.905882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.906524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.906715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [141.907093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [141.907546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.907553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [141.907740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [141.921712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [141.921720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [141.921913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.922159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.923052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [141.923088] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.924053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [141.925544] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.949952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [141.954787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [141.955276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [141.955415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [141.955875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [141.956341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [141.957522] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [141.958169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [141.959153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [141.959171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [141.959350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [141.959525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [141.959700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [141.965230] EDID block 0 is all zeroes <7> [141.965235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [141.965244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.965282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [141.965460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [141.966294] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [141.966471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [141.967146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [141.967346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [141.967540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [141.968135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [141.968354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [141.969243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [141.969277] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [141.970252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [141.971668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [141.995963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.000771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.001262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.001403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.002067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.002263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [142.002683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.003113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.003134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.003307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.017263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.017271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.017448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.017663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.018552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [142.018586] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.019535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [142.020997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.045393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.050496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.050941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.051040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.065178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [142.065185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [142.066048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.066187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [142.066551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.066981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.067000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.067191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.068048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [142.068083] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.069030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [142.070503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.094904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.099769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.100261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.100401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.100857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.101077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.101539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [142.101925] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.102953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [142.105423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.129810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.135258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.135731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.135837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.136479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.136670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [142.137051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.137505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.137513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.137700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [142.152093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.152102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [142.152310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.152545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.153449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [142.153486] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.154440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [142.157074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.181427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.186458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.186903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.187000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.187427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.187880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.189068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [142.189760] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.190726] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [142.190744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [142.190926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [142.191104] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [142.191295] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [142.196813] EDID block 0 is all zeroes <7> [142.196819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [142.196827] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196850] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196854] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.196866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [142.197044] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.197892] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.198070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.198744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.198946] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.199153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.199737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.199956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.200847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [142.200881] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.201851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [142.203132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.227428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.231849] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.232336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.232475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.233436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.233574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [142.233913] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.234359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.234366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.234539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.248474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.248482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.248661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.248876] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.249767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [142.249802] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.250747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [142.252129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.276498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.280875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.281359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.281499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.295877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [142.295884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [142.296353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.296531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [142.296892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.297342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.297361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.297579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.298526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [142.298902] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.299930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [142.302129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.326480] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.331436] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.331901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.331998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.332423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.332645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.333043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [142.333078] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.334025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [142.335494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.359878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.364327] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.364790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.364896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.365538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.365729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [142.366106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.366561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.366569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.366758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [142.380722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.380730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [142.380923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.381174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.382066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [142.382102] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.383043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [142.384536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.408946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.413779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.414269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.414411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.414869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.415336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.416520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [142.417167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.418148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [142.418167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [142.418348] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [142.418523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [142.418697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [142.424227] EDID block 0 is all zeroes <7> [142.424233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [142.424241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.424279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [142.424457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.425293] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.425470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.426149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.426344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.426480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.427058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.427288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.428175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [142.428209] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.429184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [142.430599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.454900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.459766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.460258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.460399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.461064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.461233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [142.461655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.462087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.462094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.462283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.475792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.475800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.475977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.476209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.477088] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [142.477123] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.478072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [142.479542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.503927] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.508771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.509260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.509401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.523453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [142.523460] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [142.524339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.524516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [142.524879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.525324] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.525344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.525561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.526453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [142.526487] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.527436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [142.528782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.553169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.558194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.558720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.558804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.559217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.559436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.559907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [142.560286] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.561300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [142.562761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.587164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.590825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.591288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.591426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.592089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.592257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [142.592678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.593109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.593130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.593303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [142.607245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.607252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [142.607430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.607646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.608560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [142.608969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.609988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [142.611457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.635857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.640698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.641192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.641332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.641791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.642259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.643429] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [142.644102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.645088] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [142.645106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [142.645295] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [142.645470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [142.645643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [142.651231] EDID block 0 is all zeroes <7> [142.651236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [142.651244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.651283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [142.651461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.652296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.652473] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.653148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.653347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.653541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.654139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.654358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.655249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [142.655283] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.656255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [142.657668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.681914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.686780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.687262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.687403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.688066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.688234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [142.688655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.689086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.689093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.689284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.702772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.702780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.702957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.703189] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.704070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [142.704104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.705052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [142.706524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.730926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.735774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.736258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.736399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.751008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [142.751015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [142.751526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.751704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [142.752065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.752510] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.752529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.752745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.753638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [142.753671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.754614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [142.756071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.780398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.785380] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.785837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.785934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.786360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.786581] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.786979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [142.787013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.787961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [142.790422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.814817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.819294] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.819763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.819869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.820511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.820701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [142.821083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [142.821537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.821545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.821731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [142.835703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [142.835712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [142.835903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.836152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.837045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [142.837081] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.838039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [142.839530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.863938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.868769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.869259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.869400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.869858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [142.870326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [142.871508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [142.872167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [142.873148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [142.873166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [142.873343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [142.873519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [142.873694] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [142.879310] EDID block 0 is all zeroes <7> [142.879315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [142.879324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879332] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879347] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.879362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [142.879541] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [142.880376] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [142.880554] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [142.881208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [142.881379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [142.881572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [142.882167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.882387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.883277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [142.883311] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.884284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [142.885698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.910005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.914777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.915266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.915407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.916071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.916264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [142.916682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [142.917113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.917135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [142.917307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [142.931234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [142.931242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [142.931422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.931637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.932553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [142.932961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.933988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [142.935459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [142.959859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [142.964762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [142.965253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [142.965394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [142.979500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [142.979507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [142.980386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.980565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [142.980926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [142.981374] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [142.981394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [142.981610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [142.982522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [142.982933] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [142.983951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [142.986423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.010820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.015774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.016267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.016406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.016862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.017082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.017537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [143.017929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.018957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [143.021419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.045801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.050299] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.050769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.050875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.051832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.052023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [143.052647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.053094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.053102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.053304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [143.067276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.067284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [143.067477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.067711] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.068618] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [143.068655] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.069608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [143.071090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.095458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.099875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.100358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.100498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.100957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.101410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.102578] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [143.103251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.104226] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [143.104244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [143.104423] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [143.104597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [143.104771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [143.110229] EDID block 0 is all zeroes <7> [143.110235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [143.110243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.110281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [143.110459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.111292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.111470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.112143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.112299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.112492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.113075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.113306] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.114196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [143.114229] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.115204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [143.116622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.140917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.145767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.146261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.146400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.147065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.147261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [143.147679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.148111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.148134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.148305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.161795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.161803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.161981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.162214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.163095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [143.163136] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.164070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [143.165541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.189942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.194767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.195260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.195399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.209369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [143.209376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [143.210254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.210431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.210793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.211240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.211260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.211476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.212368] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [143.212402] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.213353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [143.214781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.239165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.243637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.244109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.244229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.244685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.244905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.245314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [143.245351] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.246296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [143.247758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.272153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.277139] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.277628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.277735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.278376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.278567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [143.278945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.279397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.279405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.279592] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [143.293550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.293559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [143.293754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.293987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.294892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [143.294929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.295862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [143.298415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.322833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.327768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.328262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.328401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.328861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.329328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.330509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [143.331168] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.332154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [143.332172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [143.332350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [143.332524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [143.332699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [143.338229] EDID block 0 is all zeroes <7> [143.338235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [143.338243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.338282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [143.338459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.339296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.339474] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.340153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.340353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.340547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.341141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.341359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.342248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [143.342283] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.343257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [143.344672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.368972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.373792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.374278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.374417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.375081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.375244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [143.375665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.376096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.376102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.376290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.390202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.390209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.390385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.390601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.391492] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [143.391525] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.392472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [143.393780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.418185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [143.422682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.423170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.423310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.438025] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [143.438032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [143.438258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.438435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.438798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.439239] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.439258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.439464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [143.440309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [143.440342] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [143.441289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [143.442751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [143.467212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <6> [143.469719] [IGT] i915_pm_rpm: finished subtest basic-pci-d3-state, FAIL <7> [143.482999] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [143.483814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [143.484178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.485110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.486427] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [143.486485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [143.487073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.488561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.489033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [143.490270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.491103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.491170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.491589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [143.494800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.495636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.496231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [143.496822] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [143.499005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.499020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [143.499391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [143.499436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [143.500714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [143.501619] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.502784] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [143.502812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [143.503102] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [143.503409] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [143.503697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <7> [143.509158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <5> [143.510210] EDID block 0 is all zeroes <7> [143.510218] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [143.510229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.510283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [143.510532] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.511537] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.511752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.512494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.512739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.512975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.513628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.513881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [143.513923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [143.514173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.514886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.515101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [143.515768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [143.516260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.516269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.516472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [143.530466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [143.530473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [143.530650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.530856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6 <7> [143.530880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [143.531065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.545531] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [143.545540] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [143.545777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.545954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [143.546333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [143.546764] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [143.546783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.546987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [143.547010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [143.547186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.547623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.547829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [143.547852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [143.548040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.548712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.548887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [143.549250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [143.549680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.549687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [143.549859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [143.563830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [143.563837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [143.564015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.564238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [143.564261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [143.564450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.564903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.565374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.566553] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [143.567169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [143.568157] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [143.568175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [143.568356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [143.568531] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [143.568705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [143.574310] EDID block 0 is all zeroes <7> [143.574316] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [143.574323] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574327] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574331] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574342] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574346] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.574361] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [143.574538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [143.575370] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [143.575546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [143.576207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [143.576406] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [143.576600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [143.577198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [143.577404] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [143.676279] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [143.676432] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [143.676554] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [143.676703] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [143.676838] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz <7> [143.676957] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24 <7> [143.677077] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000 <7> [143.677215] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no <7> [143.677389] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [143.677579] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A] <7> [143.677757] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [143.677947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [143.678151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [143.678332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [143.678488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [143.678622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [143.678762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [143.678894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [143.679026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [143.679175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [143.679307] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [143.679491] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [143.679678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200) <7> [143.679865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235) <7> [143.680053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200) <7> [143.680257] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235) <7> [143.680441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203) <7> [143.680585] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209) <7> [143.680718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [143.680850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [143.680981] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [143.681111] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [143.681299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [143.681488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [143.681679] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200) <7> [143.681870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235) <7> [143.682059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200) <7> [143.682263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235) <7> [143.682430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203) <7> [143.682573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209) <7> [143.682705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [143.682837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [143.682968] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [143.683100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [143.683255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000) <7> [143.683444] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000) <7> [143.683633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000) <7> [143.683823] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [143.684011] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B] <7> [143.684191] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1) <7> [143.684332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1) <7> [143.684464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [143.684596] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1) <7> [143.684728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288) <7> [143.684861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080) <7> [143.685017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [143.685249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640) <7> [143.685440] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800) <7> [143.685630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640) <7> [143.685818] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800) <7> [143.685990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656) <7> [143.686148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752) <7> [143.686282] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480) <7> [143.686414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525) <7> [143.686546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480) <7> [143.686678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525) <7> [143.686809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490) <7> [143.686966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492) <7> [143.687169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640) <7> [143.687359] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800) <7> [143.687550] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640) <7> [143.687738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800) <7> [143.687900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656) <7> [143.688033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752) <7> [143.688178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480) <7> [143.688310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525) <7> [143.688441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480) <7> [143.688576] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525) <7> [143.688765] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490) <7> [143.688957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492) <7> [143.689193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [143.689384] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [143.689574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [143.689716] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [143.689851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175) <7> [143.689983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175) <7> [143.690134] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000) <7> [143.690272] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [143.690433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3 <7> [143.690591] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3 <7> [143.690798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642 <7> [143.690982] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27 <7> [143.691177] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [143.691359] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 <7> [143.691505] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 <7> [143.691631] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 <7> [143.691757] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208 <7> [143.691881] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15 <7> [143.692006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [143.692142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 <7> [143.692322] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 <7> [143.692505] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 <7> [143.692710] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [143.692899] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz) <7> [143.693089] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz) <7> [143.693264] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [143.693403] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [143.693537] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1 <7> [143.693668] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1 <7> [143.693800] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2 <7> [143.693930] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2 <7> [143.694069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [143.694302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [143.694492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [143.694681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [143.694869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [143.695059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [143.695219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [143.695353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [143.695485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [143.695617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [143.695749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [143.695881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [143.696033] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [143.696235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [143.696424] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [143.696615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000 <7> [143.696803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0 <7> [143.696968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [143.697100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [143.697245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [143.697377] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4 <7> [143.697508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [143.697670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [143.697859] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [143.698047] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.698250] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.698439] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.698610] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [143.698750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:126] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [143.698885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [143.699017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [143.699175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [143.699308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [143.699441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset] <7> [143.699627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [143.699816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 <7> [143.700007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [143.700238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [143.700416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [143.700555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [143.700688] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64 <7> [143.700819] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [143.700950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [143.701082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [143.701269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [143.701459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [143.701648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [143.701838] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [143.702023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [143.702177] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [143.702310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175 <7> [143.702442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0 <7> [143.702573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [143.702703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [143.702863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [143.703051] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 <7> [143.703254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [143.703444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [143.703631] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [143.703805] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.703945] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.704077] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [143.704221] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [143.704353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:126] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [143.704485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [143.704617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0 <7> [143.704782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [143.704973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [143.705341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [143.705530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [143.705918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [143.706454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [143.706701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [143.706886] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [143.707070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [143.707266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [143.707450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [143.707585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [143.707713] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [143.707840] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [143.707981] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [143.708132] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [143.708268] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [143.708426] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [143.708618] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [143.708806] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 <7> [143.709245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [143.709417] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [143.710968] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B] <7> [143.711104] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2 <7> [143.711446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [143.711674] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [143.712672] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [143.713710] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06 <7> [143.714278] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [143.714463] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [143.714647] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1 <7> [143.715679] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK <7> [143.715859] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2 <7> [143.717658] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful <7> [143.717783] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1 <7> [143.718525] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B <7> [143.735587] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [143.735766] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [143.736025] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [143.736292] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [143.736528] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [143.736897] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <6> [143.737575] [IGT] i915_pm_rpm: exiting, ret=98 <6> [143.752371] Console: switching to colour frame buffer device 80x30

<6> [131.242829] Console: switching to colour dummy device 80x25

<6> [131.243193] [IGT] i915_pm_rpm: executing

<7> [131.246625] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [131.247029] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [131.247049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [131.247427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.247548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.247861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.247999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.248007] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.248146] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [131.251017] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.251021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [131.251155] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [131.251232] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [131.251245] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [131.264408] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [131.264414] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [131.264644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [131.264777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [131.265091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [131.265239] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.265456] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [131.265471] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [131.265475] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [131.265479] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [131.265482] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [131.265486] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [131.265489] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [131.265492] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [131.265495] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [131.265498] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [131.265502] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [131.265505] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [131.265508] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [131.265554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [131.265568] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [131.265707] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [131.265766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [131.265778] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [131.266153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.266300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [131.266616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.266752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.266756] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.266873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [131.269689] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.269694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [131.269815] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [131.269881] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [131.269894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [131.270608] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [131.271153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [131.271956] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [131.271968] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [131.272092] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [131.272228] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [131.272357] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [131.277708] EDID block 0 is all zeroes

<7> [131.277711] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [131.277715] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277717] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277719] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277721] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277723] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277727] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.277734] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [131.277865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [131.278562] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.278684] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [131.279295] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [131.279310] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [131.279315] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [131.279318] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [131.279322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [131.279325] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [131.283202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [131.283219] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [131.283558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.283678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.283975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.284110] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.284132] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.284304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [131.287191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.287196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [131.287320] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [131.287941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [131.287955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [131.288093] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [131.288859] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [131.288880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [131.289228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.289348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [131.289646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.289833] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.289839] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.290012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [131.292908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.292913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [131.293036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [131.293842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [131.293858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [131.294205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.294325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [131.294627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [131.294817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.294822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.294996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [131.297883] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [131.297889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [131.298011] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [131.298038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [131.298051] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [131.311215] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [131.311221] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [131.311437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [131.311560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [131.311859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [131.311993] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [131.312251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [131.312270] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [131.312277] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [131.312282] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [131.312287] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [131.312292] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [131.312297] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [131.312302] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [131.312307] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [131.312312] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [131.312317] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [131.312322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [131.312327] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [131.312361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [131.312380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [131.312575] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [131.312612] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [131.312630] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [131.313028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.313217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [131.313580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [131.313721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.313725] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [131.313842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [131.316686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [131.316691] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [131.316816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [131.316843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [131.316856] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [131.317602] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [131.318224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [131.319078] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [131.319095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [131.319284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [131.319413] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [131.319533] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [131.324960] EDID block 0 is all zeroes

<7> [131.324964] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [131.324969] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324971] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324972] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324974] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324976] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324977] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324979] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324981] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.324987] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [131.325110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [131.325874] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [131.326030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [131.326694] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [131.326714] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [131.326720] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [131.326726] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [131.326731] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [131.326736] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [131.327317] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:125]

<7> [132.359389] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [132.359734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [132.360495] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [132.361187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [132.361973] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [132.362657] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [132.363241] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [132.363408] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.363540] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [132.363672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.363809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.363941] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.364072] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.364211] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0)

<7> [132.364342] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0)

<7> [132.364473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0)

<7> [132.364631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0)

<7> [132.364769] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0)

<7> [132.364900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0)

<7> [132.365032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [132.365177] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [132.365310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [132.365441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [132.365573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [132.365703] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [132.365832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0)

<7> [132.366008] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0)

<7> [132.366202] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0)

<7> [132.366390] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0)

<7> [132.366577] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0)

<7> [132.366765] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0)

<7> [132.366952] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [132.367149] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [132.367331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [132.367465] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [132.367597] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0)

<7> [132.367730] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0)

<7> [132.367870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0)

<7> [132.368001] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [132.368156] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1

<7> [132.368306] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [132.368440] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x1, ddb (669 - 892) -> (0 - 892), active pipes 0x3 -> 0x2

<7> [132.368599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0

<7> [132.368768] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0

<7> [132.368947] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.369141] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.369321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.369503] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.369684] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 860), size 208 -> 860

<7> [132.369856] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 860 - 892), size 15 -> 32

<7> [132.370000] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [132.370147] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [132.370285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [132.370423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [132.370554] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [132.370684] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [132.370926] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [132.375184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [132.375334] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [132.375479] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1

<7> [132.375616] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [132.375744] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [132.375877] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [132.376003] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [132.376150] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [132.376334] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [132.376518] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [132.376700] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [132.376898] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [132.377097] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [132.377263] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [132.377399] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [132.381580] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [132.381774] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [132.381999] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [132.382055] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [132.382218] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0)

<7> [132.382411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)

<7> [132.382601] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0)

<7> [132.382791] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0)

<7> [132.382981] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)

<7> [132.383141] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [132.383275] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0)

<7> [132.383407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0)

<7> [132.383543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0)

<7> [132.383675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0)

<7> [132.383806] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0)

<7> [132.383937] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0)

<7> [132.384068] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0)

<7> [132.384214] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0)

<7> [132.384401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0)

<7> [132.384590] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0)

<7> [132.384780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0)

<7> [132.384967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0)

<7> [132.385165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0)

<7> [132.385348] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0)

<7> [132.385480] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0)

<7> [132.385612] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0)

<7> [132.385743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0)

<7> [132.385882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0)

<7> [132.386013] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0)

<7> [132.386157] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0)

<7> [132.386288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0)

<7> [132.386419] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0)

<7> [132.386549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0)

<7> [132.386690] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0)

<7> [132.386877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [132.387065] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [132.387268] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [132.387458] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [132.387646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0)

<7> [132.387822] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0)

<7> [132.387956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0)

<7> [132.388088] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [132.388243] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2

<7> [132.388398] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [132.388543] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0

<7> [132.388668] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0

<7> [132.388792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [132.388915] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.389039] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.389209] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [132.389414] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [132.389604] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [132.389794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset]

<7> [132.389982] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no

<7> [132.390159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [132.390292] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [132.390503] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B

<7> [132.400377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [132.400534] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B]

<7> [132.400686] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2

<7> [132.400833] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [132.400971] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [132.401108] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [132.401255] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [132.401438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [132.401619] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [132.401801] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [132.401993] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [132.402203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [132.402357] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [132.402492] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [132.402627] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [132.402789] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [132.403012] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [132.434043] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000

<7> [132.434190] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short

<7> [132.434337] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short

<7> [132.435039] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [132.435623] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [132.436427] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [132.588191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [132.588730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [132.589050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.589397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.590099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.591301] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.595421] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.598131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [132.706424] [IGT] i915_pm_rpm: starting subtest basic-pci-d3-state

<7> [132.735866] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [132.748354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.763685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [132.765109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.765713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.766211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [132.766918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.767688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [132.768183] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.768647] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.769522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.770983] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.772027] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [132.773307] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.779655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.804306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.814010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [132.814745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.815097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.815545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [132.816338] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.817190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [132.817729] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.818290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.819243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.819831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.820659] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [132.820732] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [132.821424] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.828724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.853552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.862306] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [132.862892] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.863188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.864520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [132.864767] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [132.865182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [132.865624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [132.865634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [132.865813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [132.879255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [132.879264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [132.879448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.880100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.881026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.881988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [132.886766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.911252] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.916782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [132.917372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.917661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.917924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [132.918434] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [132.919059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [132.919368] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [132.919692] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [132.920367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.920704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.921724] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [132.922315] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.926140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [132.950654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [132.959452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [132.960096] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [132.960348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [132.975745] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [132.975764] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [132.976713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [132.977055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [132.977857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [132.978472] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [132.978504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [132.978923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [132.979928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [132.980372] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [132.981898] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [132.987495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.012218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.018180] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.018670] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.018799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.019447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.019665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.020137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [133.020499] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.021508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [133.024311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.048691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.053762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.054324] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.054486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.055546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.055759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [133.056413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.056910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.056919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.057171] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [133.071142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.071150] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [133.071392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.071691] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.072630] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [133.073053] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.074078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [133.076998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.101414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.110522] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.111097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.111298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.111879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.112397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.114608] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [133.115360] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [133.116430] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [133.116452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [133.116685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [133.116910] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [133.117154] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [133.123176] EDID block 0 is all zeroes

<7> [133.123183] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [133.123194] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123198] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123202] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123205] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123209] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123220] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.123235] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [133.123464] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [133.124396] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.124624] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [133.125392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.125763] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.126015] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.126682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.126965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.127878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [133.127920] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.129005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.131882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.156277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.161318] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.161779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.161865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.162775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.162897] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.163436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.163859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.163864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.164006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.176917] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.176922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.177046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.177210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.178033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [133.178057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.178986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [133.181440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.205786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.210787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.211283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.211400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.225477] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [133.225486] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [133.226348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.226492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.226815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.227218] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.227234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.227451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.228343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [133.228372] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.229295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [133.232047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.256386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.261874] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.262380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.262509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.262959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.263183] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.263507] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [133.263901] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.264921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [133.267450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.291804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.299979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.300571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.300752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.301827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.302111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [133.302851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.303479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.303494] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.303789] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [133.318762] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.318773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [133.319038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.319390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.320334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [133.320754] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.322304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [133.327757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.352226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.360851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.361446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.361646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.362238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.362773] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.364106] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [133.364892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [133.365987] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [133.366011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [133.366289] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [133.366536] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [133.366783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [133.373084] EDID block 0 is all zeroes

<7> [133.373092] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [133.373102] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373107] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373111] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373143] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373147] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373151] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373155] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373159] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.373176] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [133.373428] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [133.374413] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.374663] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [133.375467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.375755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.376032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.376724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.377035] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.377983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [133.378414] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.379482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.384962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.409329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.413801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.414285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.414383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.415311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.415470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.416037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.416498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.416503] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.416620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.429565] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.429570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.429693] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.429845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.430677] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [133.430700] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.431628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [133.434370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.458724] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.463243] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.463706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.463812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.478336] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [133.478344] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [133.478942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.479076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.479775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.480230] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.480244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.480432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.481275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [133.481301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.482230] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [133.483662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.508033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.512767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.513247] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.513354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.513770] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.513948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.514323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [133.514361] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.515299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [133.518043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.542383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.548751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.549302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.549440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.550150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.550346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [133.551023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.551542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.551551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.551788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [133.565792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.565802] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [133.566028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.566329] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.567241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [133.567282] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.568308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [133.571086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.595574] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.604501] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.605077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.605278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.605819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.606340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.607720] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [133.608449] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [133.609740] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [133.609764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [133.609996] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [133.610235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [133.610457] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [133.616432] EDID block 0 is all zeroes

<7> [133.616439] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [133.616449] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616453] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616457] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616461] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616464] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616468] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616472] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616475] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.616489] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [133.616717] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [133.617644] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.617870] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [133.618645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.618916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.619209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.619850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.620144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.621044] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [133.621085] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.622098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.624944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.649273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.654249] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.654711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.654808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.655728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.655859] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.656412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.656865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.656869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.656997] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.669884] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.669888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.670019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.670191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.671027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [133.671051] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.671987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [133.674471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.698831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.707642] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.708735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.709265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.725161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [133.725195] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [133.726093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.726738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.727814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.728693] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.728749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.729521] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.731086] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.732716] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [133.732801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [133.738473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.762913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.768363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.768825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.768930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.769365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.769551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.769981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [133.770371] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.771361] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [133.772830] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.797197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.803613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.804160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.804308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.805323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.805518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [133.805896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [133.806360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.806367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.806557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [133.819998] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [133.820005] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [133.820204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.820432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.821310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [133.821344] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.822279] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [133.825099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.849490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.854474] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.855005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.855173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.855672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [133.856153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [133.857350] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [133.858054] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [133.859159] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [133.859181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [133.859391] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [133.859596] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [133.859799] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [133.865682] EDID block 0 is all zeroes

<7> [133.865689] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [133.865699] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865706] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865710] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865714] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865717] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865720] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865727] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.865740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [133.865950] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [133.866893] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [133.867102] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [133.867862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [133.868099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [133.868352] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [133.869013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.869287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.870237] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [133.870280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.871339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [133.874145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.898467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.903456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.903899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.903997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.904613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.904735] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [133.905286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [133.905737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.905743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [133.905860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [133.918728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [133.918732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [133.918853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.919003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.919835] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [133.919859] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.920786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [133.922157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.946467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [133.951870] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [133.952414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [133.952530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [133.966879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [133.966887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [133.967369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.967513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [133.967835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [133.968237] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [133.968252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [133.968428] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [133.969273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [133.969301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [133.970232] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [133.971684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [133.996052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.002028] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.002508] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.002624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.003055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.003261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.003605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [134.003999] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.005260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [134.008010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.032257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.037292] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.037832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.037992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.039074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.039294] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [134.040039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.040509] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.040520] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.040748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [134.054206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.054214] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [134.054410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.054656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.055549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [134.055585] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.056626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [134.059403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.083811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.089687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.090281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.090505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.091038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.091536] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.092909] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [134.093652] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [134.094744] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [134.094767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [134.094994] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [134.095246] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [134.095533] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [134.101613] EDID block 0 is all zeroes

<7> [134.101620] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [134.101630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101634] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101641] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101645] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101649] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101652] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101656] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.101670] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [134.101898] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [134.102881] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.103110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [134.103931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.104222] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.104472] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.105130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.105464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.106386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [134.106806] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.107919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [134.113072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.137466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.142403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.142864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.142962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.143581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.143703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [134.144253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.144706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.144712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.144850] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [134.157718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.157724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [134.157846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.157997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.158829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [134.158853] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.159798] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [134.162473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.186836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.191806] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.192295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.192448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.206893] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [134.206902] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [134.207137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.207321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.207645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.208042] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [134.208057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.208294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.209181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [134.209219] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.210140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [134.212931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.237322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.243720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.244269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.244408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.244859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.245058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.245499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [134.245882] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.246920] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [134.249484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.273856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.281799] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.282440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.282652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.283801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.284087] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [134.284834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.285423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.285438] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.285759] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [134.300294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.300306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [134.300570] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.300898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.301845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [134.302275] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.303415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [134.308970] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.333493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.342674] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.343784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.344100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.344764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.345426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.346948] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [134.347858] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [134.349194] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [134.349227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [134.349549] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [134.349862] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [134.350198] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [134.357200] EDID block 0 is all zeroes

<7> [134.357209] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [134.357223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.357279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [134.357597] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [134.358783] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.359104] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [134.360153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.360517] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.360866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.361639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.362096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.363516] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.365008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [134.365154] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [134.368069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.392413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.397827] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.398368] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.398480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.399418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.399573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [134.400128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.400578] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.400583] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.400713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [134.413620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.413625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [134.413747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.413900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.414732] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [134.414756] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.415701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [134.417133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.441438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.445838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.446321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.446436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.460444] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [134.460451] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [134.461324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.461478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.462024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.462485] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [134.462504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.462682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.463514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [134.463541] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.464466] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [134.465771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.490113] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.495121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.495585] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.495682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.496084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.496260] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.496638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [134.497030] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.498033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [134.500472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.524819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.530698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.531221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.531401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.532068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.532259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [134.532674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.533103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.533109] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.533293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [134.546737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.546744] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [134.546919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.547149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.548048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [134.548082] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.549056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [134.551880] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.576292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.581780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.582371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.582596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.583150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.583704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.584985] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [134.585734] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [134.586805] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [134.586828] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [134.587057] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [134.587310] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [134.587569] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [134.593758] EDID block 0 is all zeroes

<7> [134.593765] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [134.593775] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593779] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593783] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593787] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593790] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593794] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593798] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593801] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.593815] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [134.594043] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [134.595032] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.595284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [134.596103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.596389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.596701] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.597357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.597684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.598599] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [134.599026] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.600109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [134.602920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.627279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.630942] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.631428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.631542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.632473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.632620] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [134.633171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.633624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.633630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.633768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [134.646636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.646642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [134.646763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.646914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.647745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [134.647769] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.648706] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [134.650094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.674384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.677578] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.678046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.678155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.692322] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [134.692329] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [134.693202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.693351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.693895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.694365] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [134.694377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.694562] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.695392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [134.695417] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.696343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [134.697791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.722150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.725817] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.726297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.726410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.726815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.726968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.727320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [134.727353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.728267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [134.729737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.754087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.760561] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.761095] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.761253] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.761721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.761878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [134.762459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.762920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.762926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.763078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [134.776090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.776096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [134.776267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.776497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.777357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [134.777391] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.778331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [134.779808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.804198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.810656] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.811205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.811380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.811848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [134.812316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [134.813492] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [134.814173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [134.815163] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [134.815188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [134.815401] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [134.815575] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [134.815746] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [134.821219] EDID block 0 is all zeroes

<7> [134.821225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [134.821232] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.821263] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [134.821441] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [134.822277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [134.822486] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [134.823158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [134.823395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [134.823591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [134.824189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.824463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.825338] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [134.825378] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.826372] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [134.829165] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.853487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.857845] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.858326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.858441] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.859372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.859520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [134.860064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [134.860526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.860533] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.860674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [134.873580] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [134.873585] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [134.873706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.873857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.874690] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [134.874715] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.875655] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [134.877054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.901397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.904575] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.905045] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.905153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.919282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [134.919288] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [134.920161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.920317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [134.920862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [134.921332] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [134.921345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.921520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.922351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [134.922380] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.923302] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [134.924712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.949052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.952671] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.953209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.953325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.953729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [134.953881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [134.954234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [134.954268] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [134.955182] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [134.956650] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [134.981000] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [134.986274] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [134.986790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [134.986917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [134.987928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.988092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [134.988685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [134.989097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [134.989104] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [134.989268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [135.002292] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.002299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [135.002456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.002652] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.003513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [135.003542] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.004486] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [135.007307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.031680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.036921] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.037469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.037628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.038153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.038665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.039892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [135.040614] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [135.041646] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [135.041666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [135.041864] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [135.042060] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [135.042281] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [135.048098] EDID block 0 is all zeroes

<7> [135.048104] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [135.048113] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048141] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048145] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048148] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048152] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048155] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048159] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048162] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.048175] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [135.048452] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [135.049337] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.049537] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [135.050257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.050496] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.050716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.051340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.051626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.052518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [135.052561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.053645] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.056184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.080529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.084840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.085321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.085437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.086368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.086515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.087060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.087522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.087529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.087670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.100583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.100588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.100709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.100860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.101692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [135.101715] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.102661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [135.104083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.128386] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.132840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.133321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.133435] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.147895] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [135.147903] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [135.148131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.148285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.148877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.149348] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [135.149361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.149539] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.150371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [135.150400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.151325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [135.152738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.177082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.181927] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.182469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.182586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.182988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.183150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.183535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [135.183933] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.184931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [135.186156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.210445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.216443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.216932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.217060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.218029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.218200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [135.218570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.218982] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.218988] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.219155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [135.232192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.232199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [135.232358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.232554] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.233416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [135.233448] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.234390] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [135.237130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.261482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.266776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.267329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.267525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.268021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.268490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.269733] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [135.270454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [135.271479] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [135.271498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [135.271698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [135.271895] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [135.272091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [135.277840] EDID block 0 is all zeroes

<7> [135.277847] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [135.277856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277860] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277863] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277866] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277870] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277873] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277876] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277879] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.277891] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [135.278091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [135.279023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.279245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [135.279985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.280232] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.280506] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.281136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.281420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.282313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [135.282353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.283385] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.286147] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.310491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.316296] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.316754] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.316840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.317448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.317570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.318112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.318574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.318581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.318728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.331635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.331640] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.331761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.331913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.332747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [135.332771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.333707] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [135.335137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.359484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.363841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.364321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.364436] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.378446] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [135.378453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [135.379326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.379481] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.380026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.380488] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [135.380507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.380677] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.381538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [135.381565] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.382459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [135.383771] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.408114] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.411677] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.412706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.412794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.413216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.413404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.413815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [135.414207] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.415189] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [135.416657] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.441007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.446654] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.447157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.447321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.447959] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.448130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [135.448548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.448959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.448965] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.449130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [135.462147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.462154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [135.462310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.462507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.463369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [135.463400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.464342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [135.467168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.491541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.496603] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.497158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.497365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.497855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.498327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.499584] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [135.500294] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [135.501318] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [135.501339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [135.501540] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [135.501736] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [135.501930] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [135.507797] EDID block 0 is all zeroes

<7> [135.507804] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [135.507812] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507816] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507819] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.507848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [135.508047] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [135.508962] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.509182] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [135.509920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.510167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.510426] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.511034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.511294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.512239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [135.512281] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.513307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.516168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.540514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.545435] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.545879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.545977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.546598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.546720] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.547275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.547726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.547731] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.547860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.560766] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.560772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.560893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.561045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.561880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [135.561904] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.562849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [135.564167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.588441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.591579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.592047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.592154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.606354] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [135.606361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [135.607228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.607377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.607922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.608394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [135.608406] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.608582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.609418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [135.609448] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.610369] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [135.611803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.636161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.640681] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.641162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.641286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.641682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.641834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.642185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [135.642214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.643148] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [135.644614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.668964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.674728] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.675215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.675364] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.676311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.676523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [135.676863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.677285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.677292] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.677480] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [135.690468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.690475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [135.690635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.690831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.691692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [135.691722] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.692671] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [135.695482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.719861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.724763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.725292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.725466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.725950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.726406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.727606] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [135.728277] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [135.729235] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [135.729259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [135.729438] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [135.729611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [135.729783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [135.735391] EDID block 0 is all zeroes

<7> [135.735397] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [135.735405] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735408] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735411] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735417] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735420] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.735436] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [135.735613] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [135.736440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.736618] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [135.737273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.737477] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.737672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.738272] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.738530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.739401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [135.739445] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.740447] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.743184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.767511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.771879] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.772357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.772473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.773406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.773552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [135.774096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [135.774558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.774565] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.774713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [135.787618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [135.787623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [135.787745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.787896] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.788729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [135.788752] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.789690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [135.791112] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.815479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.819862] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.820342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.820457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.834987] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [135.834993] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [135.835489] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.835637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [135.836187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [135.836640] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [135.836653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.836804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.837635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [135.837663] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.838594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [135.839995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.864344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.868016] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.868490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.868587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.868989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.869162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.869539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [135.869935] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.870933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [135.872156] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.896462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.901898] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.902405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.902560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.903564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.903752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [135.904343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [135.904796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.904802] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [135.904971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [135.917951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [135.917958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [135.918131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.918360] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.919221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [135.919256] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.920203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [135.922987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.947377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [135.952769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [135.953322] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [135.953520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [135.954015] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [135.954482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [135.955745] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [135.956449] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [135.957478] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [135.957498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [135.957699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [135.957897] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [135.958091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [135.963914] EDID block 0 is all zeroes

<7> [135.963921] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [135.963929] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963933] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963936] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963940] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963943] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963946] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963949] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963952] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.963964] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [135.964195] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [135.965140] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [135.965381] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [135.966079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [135.966331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [135.966610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [135.967235] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [135.967520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [135.968414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [135.968459] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [135.969494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [135.972322] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [135.996666] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.001392] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.001852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.001949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.002568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.002691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [136.003241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.003694] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.003700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.003841] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [136.016717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.016722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [136.016843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.016994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.017827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [136.017852] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.018793] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [136.020132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.044427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.049484] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.049941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.050048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.064187] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [136.064194] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [136.065049] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.065196] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [136.065537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.065922] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [136.065936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.066100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.066942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [136.066969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.067918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [136.070443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.094807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.099783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.100263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.100402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.100808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.100974] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.101334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [136.101361] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.102308] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [136.105076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.129389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.135831] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.136398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.136595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.137647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.137850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [136.138507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.138975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.138983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.139192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [136.152709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.152718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [136.152915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.153179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.154130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [136.154168] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.155169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [136.158051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.182462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.190182] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.190756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.190938] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.191566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [136.192174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.193604] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [136.194378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [136.195562] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [136.195589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [136.195855] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [136.196134] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [136.196453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [136.202930] EDID block 0 is all zeroes

<7> [136.202938] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [136.202949] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202954] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202959] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202963] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202968] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202972] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202976] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202980] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.202996] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [136.203297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [136.204409] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.204676] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [136.205557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [136.205861] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.206169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.206905] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.207253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.208282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [136.208699] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.210278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [136.213164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.237584] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.243492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.243953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.244051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.244983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.245105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [136.245653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.246029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.246034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.246163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [136.259079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.259084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [136.259216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.259392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.260223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [136.260251] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.261212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [136.263967] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.288276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.293341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.293804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.293910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.308109] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [136.308123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [136.308975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.309107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [136.309437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.309830] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [136.309844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.310009] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.310850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [136.310883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.311820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [136.314476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.338840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.343304] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.343767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.343874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.344302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.344506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.344856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [136.344881] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.345832] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [136.348472] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.372832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.377751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.378279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.378466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.379146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.379358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [136.379714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.380154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.380161] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.380385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [136.393855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.393864] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [136.394060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.394325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.395264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [136.395308] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.396303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [136.399155] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.423559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.430022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.430594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.430751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.431299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [136.431846] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.433181] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [136.433901] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [136.434989] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [136.435012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [136.435264] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [136.435534] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [136.435757] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [136.441876] EDID block 0 is all zeroes

<7> [136.441883] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [136.441893] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441898] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441901] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441905] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441909] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441913] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441916] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441920] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.441933] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [136.442193] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [136.443190] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.443457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [136.444226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [136.444566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.444828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.445486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.445813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.446731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [136.447174] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.448674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [136.451443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.475752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.480762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.481254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.481394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.482059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.482224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [136.482646] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.483076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.483083] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.483271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [136.496761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.496768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [136.496948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.497178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.498059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [136.498093] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.499036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [136.501795] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.526210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.530756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.531242] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.531382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.545424] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [136.545431] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [136.545993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.546130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [136.546493] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.546923] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [136.546942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.547171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.548053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [136.548087] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.549033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [136.550505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.574893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.579770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.580265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.580404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.580861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.581082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.581538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [136.581916] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.582944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [136.585420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.609808] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.614787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.615275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.615426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.616420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.616611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [136.616990] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.617453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.617461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.617647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [136.631591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.631599] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [136.631791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.632025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.632932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [136.632968] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.633916] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [136.636422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.660779] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.665759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.666253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.666394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.666854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [136.667322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.668490] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [136.669163] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [136.670147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [136.670165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [136.670343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [136.670519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [136.670697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [136.676222] EDID block 0 is all zeroes

<7> [136.676227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [136.676235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.676274] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [136.676451] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [136.677284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.677462] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [136.678141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [136.678342] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.678535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.679132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.679353] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.680241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [136.680274] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.681249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [136.683953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.708271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.712801] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.713288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.713428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.714093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.714286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [136.714704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.715147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.715155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.715326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [136.729236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.729244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [136.729421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.729636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.730528] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [136.730561] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.731510] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [136.734071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.758425] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.762878] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.763361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.763501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.777413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [136.777420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [136.778289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.778466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [136.778828] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [136.779271] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [136.779291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.779507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.780398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [136.780432] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.781380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [136.784068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.808393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.812850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.813336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.813475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.813931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.814167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.814500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [136.814870] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.815898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [136.817128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.841467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.846836] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.847326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.847478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.848488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.848677] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [136.849058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [136.849522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.849530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.849716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [136.863696] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [136.863704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [136.863896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.864148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.865040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [136.865077] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.866037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [136.867534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.891929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.896770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.897264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.897404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.897863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [136.898330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [136.899510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [136.900167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [136.901153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [136.901171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [136.901351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [136.901526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [136.901700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [136.907230] EDID block 0 is all zeroes

<7> [136.907236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [136.907244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.907282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [136.907460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [136.908292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [136.908470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [136.909151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [136.909352] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [136.909546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [136.910138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.910357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.911246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [136.911280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.912254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [136.913670] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.937976] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.942770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.943264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.943403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [136.944068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.944264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [136.944681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [136.945112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.945135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [136.945307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [136.959218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [136.959226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [136.959403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [136.959619] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [136.960512] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [136.960546] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [136.961486] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [136.962947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [136.987344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [136.992389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [136.992849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [136.992947] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.006982] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [137.006989] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [137.007580] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.007758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [137.008132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.008567] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [137.008586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.008802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.009693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [137.009727] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.010674] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [137.013395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.037798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.042773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.043264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.043403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.043859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.044081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.044540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [137.044930] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.045958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [137.047501] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.071891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.077733] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.078210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.078363] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.079359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.079549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [137.079929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.080389] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.080398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.080584] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [137.094530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.094538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [137.094731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.094965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.095870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [137.095906] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.096874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [137.099416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.123812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.128763] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.129257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.129397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.129857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [137.130327] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.131489] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [137.132166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [137.133155] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [137.133173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [137.133350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [137.133525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [137.133701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [137.139309] EDID block 0 is all zeroes

<7> [137.139315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [137.139324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139332] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139336] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139347] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.139362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [137.139540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [137.140373] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.140551] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [137.141213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [137.141413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.141606] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.142201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.142421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.143312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [137.143346] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.144323] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [137.147029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.171313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.176389] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.176833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.176930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.177552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.177728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [137.178090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.178528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.178535] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.178666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [137.192541] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.192549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [137.192726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.192941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.193835] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [137.193868] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.194813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [137.197416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.221814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.226769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.227264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.227404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.241783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [137.241790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [137.242258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.242435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [137.242798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.243245] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [137.243264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.243480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.244371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [137.244405] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.245355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [137.246780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.271164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.275720] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.276207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.276347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.276802] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.277021] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.277493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [137.277869] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.278897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [137.280600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.304986] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.309789] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.310275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.310425] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.311420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.311578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [137.311933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.312393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.312401] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.312588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [137.326507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.326516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [137.326709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.326943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.327851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [137.327887] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.328841] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [137.331424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.355824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.360770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.361258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.361399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.361858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [137.362324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.363505] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [137.364166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [137.365153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [137.365171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [137.365351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [137.365529] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [137.365704] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [137.371230] EDID block 0 is all zeroes

<7> [137.371236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [137.371244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.371283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [137.371461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [137.372296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.372475] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [137.373153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [137.373328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.373494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.374077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.374310] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.375200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [137.375228] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.376210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [137.377626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.401922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.406769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.407259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.407400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.408065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.408218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [137.408639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.409069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.409076] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.409266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [137.423177] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.423185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [137.423364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.423580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.424496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [137.424903] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.425931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [137.427133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.451468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.456363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.456824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.456922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.471107] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [137.471116] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [137.471694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.471873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [137.472464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.472948] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [137.472967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.473197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.474078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [137.474112] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.475061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [137.476533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.500933] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.505769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.506264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.506404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.506858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.507078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.507544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [137.507923] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.508951] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [137.510130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.534491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.539844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.540334] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.540475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.541437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.541576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [137.541924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.542368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.542375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.542550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [137.556058] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.556066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [137.556259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.556475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.557364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [137.557398] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.558347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [137.559780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.584179] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.588778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.589267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.589405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.589865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [137.590333] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.591491] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [137.592169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [137.593159] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [137.593177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [137.593355] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [137.593531] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [137.593705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [137.599310] EDID block 0 is all zeroes

<7> [137.599315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [137.599324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599331] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599346] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.599362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [137.599540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [137.600378] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.600556] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [137.601222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [137.601422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.601615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.602214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.602433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.603323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [137.603358] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.604335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [137.605750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.630047] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.635008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.635537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.635636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.636585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.636761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [137.637375] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.637830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.637837] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.638011] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [137.651938] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.651946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [137.652138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.652355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.653244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [137.653278] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.654228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [137.655688] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.680072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.685105] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.685637] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.685722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.699879] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [137.699886] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [137.700477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.700657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [137.701018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.701464] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [137.701483] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.701698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.702586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [137.702620] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.703570] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [137.705031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.728387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.732032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.732501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.732587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.732978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.733153] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.733537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [137.733924] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.734945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [137.737420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.761810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.766787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.767273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.767423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.768447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.768588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [137.768966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.769432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.769440] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.769628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [137.783579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.783588] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [137.783780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.784013] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.784918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [137.784954] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.785911] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [137.788420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.812818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.817771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.818258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.818399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.818856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [137.819324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [137.820488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [137.821161] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [137.822146] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [137.822164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [137.822343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [137.822518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [137.822693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [137.828227] EDID block 0 is all zeroes

<7> [137.828233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [137.828241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.828279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [137.828456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [137.829288] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [137.829465] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [137.830141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [137.830340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [137.830532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [137.831129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.831349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.832237] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [137.832271] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.833246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [137.834661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.858958] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.863759] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.864260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.864401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.865067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.865230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [137.865652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [137.866082] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.866090] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.866278] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [137.879767] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [137.879775] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [137.879953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.880185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.881066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [137.881100] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.882049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [137.883520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.907922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.912769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.913261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.913400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.927412] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [137.927419] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [137.928296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.928473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [137.928836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [137.929280] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [137.929299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.929488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.930331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [137.930365] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.931307] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [137.932764] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.957157] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.962186] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.962709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.962795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.963207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [137.963426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [137.963896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [137.964279] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [137.965299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [137.966761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [137.991153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [137.996181] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [137.996705] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [137.996791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [137.997405] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.997583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [137.997945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [137.998391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [137.998398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [137.998570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [138.012512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.012520] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [138.012697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.012911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.013802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [138.013836] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.014781] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [138.016126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.040498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.044880] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.045362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.045503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.045962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.046415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.047577] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [138.048251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [138.049227] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [138.049245] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [138.049424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [138.049600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [138.049774] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [138.055401] EDID block 0 is all zeroes

<7> [138.055407] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [138.055415] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055419] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055423] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055427] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055431] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055434] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055438] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055442] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.055454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [138.055631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [138.056481] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.056657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [138.057336] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.057537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.057731] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.058328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.058548] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.059434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [138.059468] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.060444] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.061783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.086092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.091130] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.091656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.091740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.092352] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.092527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [138.092889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.093333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.093340] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.093513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [138.107451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.107458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [138.107636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.107852] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.108745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [138.108779] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.109722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [138.111129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.135461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.140456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.140898] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.140983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.155124] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [138.155140] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [138.155992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.156134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [138.156497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.156928] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [138.156947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.157139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.158021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [138.158054] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.158996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [138.160468] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.184864] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.189768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.190259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.190400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.190855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.191074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.191533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [138.191922] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.192950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [138.194130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.218516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.222840] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.223326] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.223465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.224145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.224322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [138.224683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.225129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.225136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.225309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [138.239220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.239227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [138.239404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.239620] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.240509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [138.240543] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.241490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [138.242953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.267365] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.271009] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.271484] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.271568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.271961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.272437] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.273579] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [138.274255] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [138.275228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [138.275246] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [138.275425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [138.275603] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [138.275777] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [138.281400] EDID block 0 is all zeroes

<7> [138.281406] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [138.281414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281418] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281426] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281430] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281433] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281437] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281441] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.281453] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [138.281631] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [138.282466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.282645] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [138.283309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.283509] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.283704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.284299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.284517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.285407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [138.285441] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.286416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.287783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.312090] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.317133] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.317657] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.317742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.318354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.318531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [138.318894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.319339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.319344] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.319515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [138.333446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.333454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [138.333631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.333848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.334739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [138.334773] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.335717] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [138.337110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.361474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.366456] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.366902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.367000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.381066] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [138.381073] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [138.381667] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.381845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [138.382206] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.382635] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [138.382653] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.382869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.383760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [138.383794] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.384742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [138.386130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.410482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.414844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.415331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.415471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.415927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.416164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.416495] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [138.416867] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.417895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [138.419129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.443475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.448841] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.449331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.449483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.450485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.450678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [138.451056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.451522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.451530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.451716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [138.465714] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.465723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [138.465915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.466166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.467057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [138.467094] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.468048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [138.469542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.493953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.498774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.499266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.499406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.499865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.500331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.501512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [138.502167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [138.503150] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [138.503168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [138.503346] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [138.503524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [138.503698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [138.509230] EDID block 0 is all zeroes

<7> [138.509235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [138.509243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.509282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [138.509460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [138.510292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.510469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [138.511145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.511345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.511540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.512137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.512356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.513245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [138.513279] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.514253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.515669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.539968] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.544770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.545261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.545401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.546065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.546225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [138.546645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.547077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.547084] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.547271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [138.560760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.560768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [138.560944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.561171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.562052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [138.562083] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.563033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [138.564504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.588902] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.593768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.594260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.594400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.608413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [138.608420] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [138.609299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.609477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [138.609839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.610287] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [138.610306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.610522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.611415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [138.611449] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.612389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [138.613782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.638181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.642781] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.643269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.643407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.643864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.644083] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.644529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [138.644918] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.645947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [138.647133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.671483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.676914] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.677405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.677545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.678559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.678714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [138.679024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.679470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.679478] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.679650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [138.693563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.693570] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [138.693748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.693962] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.694855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [138.694888] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.695833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [138.697127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.721485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.726363] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.726824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.726921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.727349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.727787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.728972] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [138.729646] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [138.730634] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [138.730652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [138.730832] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [138.731007] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [138.731195] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [138.736813] EDID block 0 is all zeroes

<7> [138.736819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [138.736827] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736850] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736854] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.736866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [138.737044] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [138.737889] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.738067] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [138.738741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.738941] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.739147] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.739730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.739948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.740838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [138.740872] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.741844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.743129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.767426] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.772464] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.772906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.772990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.773621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.773796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [138.774408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [138.774870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.774877] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.775049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [138.788981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [138.788989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [138.789183] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.789398] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.790290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [138.790324] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.791276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [138.792738] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.817151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.821676] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.822161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.822302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.836759] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [138.836766] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [138.837239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.837416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [138.837781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [138.838225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [138.838244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.838461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.839349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [138.839383] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.840332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [138.841779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.866177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.870730] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.871216] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.871356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.871812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.872033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.872494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [138.872883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.873912] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [138.876416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.900803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.906729] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.907232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.907385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.908380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.908573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [138.908952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [138.909420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.909428] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [138.909614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [138.924013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [138.924022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [138.924232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.924466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.925371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [138.925407] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.926381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [138.929073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.953436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [138.958461] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [138.958904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [138.959002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [138.959428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [138.959881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [138.961068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [138.961758] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [138.962727] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [138.962745] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [138.962923] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [138.963097] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [138.963284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [138.968815] EDID block 0 is all zeroes

<7> [138.968820] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [138.968829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968841] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968848] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968852] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.968868] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [138.969045] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [138.969895] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [138.970071] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [138.970747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [138.970947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [138.971158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [138.971741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [138.971960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [138.972849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [138.972883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [138.973856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [138.975132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [138.999437] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.003886] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.004370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.004509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.005517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.005657] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [139.006000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.006446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.006454] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.006630] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [139.020527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.020535] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [139.020712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.020927] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.021820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [139.021854] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.022797] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [139.024132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.048492] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.053863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.054372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.054511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.068374] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [139.068381] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [139.069250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.069427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [139.069790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.070234] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [139.070253] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.070470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.071358] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [139.071392] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.072340] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [139.073780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.098178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.102775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.103266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.103405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.103861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.104080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.104552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [139.104931] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.105958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [139.108421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.132812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.137707] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.138196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.138337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.139002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.139195] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [139.139613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.140045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.140052] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.140238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [139.153727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.153735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [139.153913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.154142] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.155024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [139.155057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.156006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [139.157478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.181877] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.186784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.187279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.187419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.187878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [139.188345] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [139.189519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [139.190165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [139.191154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [139.191172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [139.191349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [139.191524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [139.191698] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [139.197231] EDID block 0 is all zeroes

<7> [139.197237] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [139.197245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.197283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [139.197460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [139.198291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.198469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [139.199144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [139.199340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [139.199475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [139.200051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.200286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.201173] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [139.201207] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.202184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [139.203600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.227899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.232776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.233267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.233407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.234072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.234235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [139.234656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.235087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.235094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.235281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [139.248771] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.248779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [139.248956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.249191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.250072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [139.250103] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.251048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [139.252520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.276917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.281767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.282261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.282400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.296514] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [139.296521] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [139.297401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.297578] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [139.297940] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.298385] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [139.298404] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.298622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.299515] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [139.299549] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.300496] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [139.301943] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.326355] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.330838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.331325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.331465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.331921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.332157] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.332489] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [139.332860] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.333887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [139.335129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.359473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.364863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.365409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.365562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.366571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.366731] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [139.367084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.367544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.367552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.367738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [139.381682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.381690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [139.381882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.382118] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.383025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [139.383062] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.384018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [139.385509] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.409905] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.414771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.415266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.415405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.415864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [139.416330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [139.417494] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [139.418167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [139.419154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [139.419172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [139.419351] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [139.419526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [139.419702] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [139.425228] EDID block 0 is all zeroes

<7> [139.425234] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [139.425243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.425281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [139.425463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [139.426300] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.426480] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [139.427150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [139.427319] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [139.427513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [139.428097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.428334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.429224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [139.429257] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.430232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [139.431647] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.455946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.460766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.461259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.461399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.462064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.462257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [139.462676] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.463105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.463112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.463302] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [139.477212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.477220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [139.477398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.477613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.478505] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [139.478539] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.479483] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [139.480947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.505361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.508955] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.509500] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.509637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.524179] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [139.524186] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [139.524402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.524525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [139.524836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.525226] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [139.525245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.525461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.526351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [139.526386] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.527329] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [139.528783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.553168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.558259] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.558720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.558806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.559219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.559438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.559908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [139.560289] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.561310] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [139.562782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.587169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.590834] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.591293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.591431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.592095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.592287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [139.592706] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.593149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.593156] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.593328] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [139.606820] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.606828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [139.607005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.607238] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.608130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [139.608164] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.609101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [139.610576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.634973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.639774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.640265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.640405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.640863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [139.641329] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [139.642512] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [139.643167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [139.644147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [139.644165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [139.644343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [139.644517] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [139.644691] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [139.650232] EDID block 0 is all zeroes

<7> [139.650238] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [139.650246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650265] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650273] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.650285] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [139.650463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [139.651296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.651473] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [139.652150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [139.652351] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [139.652545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [139.653142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.653363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.654252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [139.654286] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.655259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [139.656675] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.680971] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.685772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.686266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.686406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.687071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.687264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [139.687682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.688112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.688135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.688307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [139.702219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.702227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [139.702405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.702622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.703535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [139.703945] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.704972] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [139.707422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.731817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.736787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.737279] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.737418] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.751537] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [139.751543] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [139.751996] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.752135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [139.752499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.752930] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [139.752949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.753181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.754063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [139.754097] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.755045] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [139.756517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.780913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.785773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.786263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.786403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.786859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.787079] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.787559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [139.787927] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.788953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [139.791420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.815805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.820800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.821283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.821433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.822454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.822644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [139.823022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [139.823487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.823495] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.823682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [139.837653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [139.837662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [139.837856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.838091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.838996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [139.839032] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.839987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [139.841480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.865878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.870774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.871270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.871409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.871868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [139.872335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [139.873518] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [139.874166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [139.875149] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [139.875167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [139.875345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [139.875520] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [139.875697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [139.881229] EDID block 0 is all zeroes

<7> [139.881235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [139.881243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.881282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [139.881459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [139.882293] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [139.882470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [139.883148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [139.883348] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [139.883487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [139.884061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.884293] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.885181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [139.885215] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.886192] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [139.887606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.911903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.916782] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.917273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.917413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.918078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.918233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [139.918655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [139.919086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.919093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [139.919280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [139.933190] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [139.933198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [139.933375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.933591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.934483] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [139.934517] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.935463] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [139.936780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [139.961184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [139.965783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [139.966271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [139.966408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [139.980936] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [139.980942] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [139.981409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.981585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [139.981947] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [139.982394] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [139.982414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [139.982631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [139.983523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [139.983557] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [139.984497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [139.985958] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.010363] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.014008] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.014482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.014566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.014956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.015109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.015525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [140.015912] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.016940] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [140.019423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.043813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.048784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.049272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.049423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.050416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.050607] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [140.050989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.051453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.051461] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.051649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [140.065638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.065646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [140.065839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.066074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.066981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [140.067017] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.067974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [140.070760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.095156] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.099687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.100175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.100315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.100773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.101240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.102407] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [140.103080] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.104063] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [140.104080] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [140.104270] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [140.104447] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [140.104621] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [140.110228] EDID block 0 is all zeroes

<7> [140.110233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [140.110241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.110280] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [140.110457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.111290] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.111467] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.112144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.112344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.112538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.113137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.113356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.114246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [140.114280] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.115255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [140.117961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.142270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.146795] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.147282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.147422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.148085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.148285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [140.149063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.149507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.149515] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.149688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.163612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.163620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.163798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.164014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.164908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [140.164943] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.165893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [140.168416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.192817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.197772] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.198266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.198405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.212887] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [140.212894] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [140.213363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.213541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.213903] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.214349] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [140.214369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.214583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.215528] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [140.215907] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.216935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [140.219422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.243809] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.248792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.249280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.249421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.249877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.250096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.250555] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [140.250939] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.251967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [140.254421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.278810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.284723] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.285226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.285392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.286409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.286581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [140.287211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.287681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.287690] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.287896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [140.302335] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.302344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [140.302552] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.302805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.303725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [140.303764] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.304737] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [140.307425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.331836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.336769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.337264] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.337403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.337863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.338334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.339515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [140.340167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.341153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [140.341171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [140.341349] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [140.341526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [140.341701] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [140.347231] EDID block 0 is all zeroes

<7> [140.347237] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [140.347245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347272] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.347284] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [140.347463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.348299] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.348477] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.349154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.349354] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.349546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.350143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.350363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.351253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [140.351287] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.352267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [140.354971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.379283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.383807] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.384294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.384434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.385098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.385272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [140.385694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.386137] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.386144] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.386316] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.399807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.399815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.399992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.400225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.401104] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [140.401146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.402087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [140.403557] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.427029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.431711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.432198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.432337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.446489] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [140.446496] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [140.447372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.447548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.448164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.448636] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [140.448655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.448871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.449761] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [140.449795] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.450742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [140.453415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.477819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.482770] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.483263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.483402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.483860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.484080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.484547] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [140.484919] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.485947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [140.488420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.512813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.518745] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.519235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.519401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.520417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.520585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [140.521229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.521692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.521701] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.521903] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [140.536329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.536338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [140.536547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.536803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.537743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [140.538156] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.539192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [140.541985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.566390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.570887] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.571371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.571511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.571971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.572424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.573578] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [140.574251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.575228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [140.575247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [140.575425] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [140.575600] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [140.575775] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [140.581400] EDID block 0 is all zeroes

<7> [140.581406] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [140.581414] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581418] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581422] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581429] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581433] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581437] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581440] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.581452] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [140.581629] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.582463] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.582640] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.583306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.583447] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.583635] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.584231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.584452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.585341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [140.585374] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.586350] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [140.587765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.612065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.617032] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.617506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.617604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.618562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.618738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [140.619354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.619804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.619811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.619983] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.633900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.633908] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.634086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.634319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.635210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [140.635245] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.636194] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [140.637654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.662055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.667036] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.667565] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.667663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.681760] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [140.681767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [140.682361] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.682539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.682901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.683328] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [140.683348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.683564] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.684453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [140.684486] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.685433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [140.688069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.712259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.717260] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.717708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.717806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.718231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.718452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.718851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [140.718885] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.719842] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [140.722415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.746810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.751785] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.752268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.752420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.753413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.753603] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [140.753980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.754441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.754449] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.754634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [140.768581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.768590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [140.768783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.769018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.769927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [140.769964] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.770918] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [140.773421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.797823] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.802774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.803263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.803403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.803862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [140.804328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [140.805509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [140.806167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [140.807154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [140.807172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [140.807350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [140.807526] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [140.807700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [140.813297] EDID block 0 is all zeroes

<7> [140.813302] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [140.813311] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813315] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813318] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813322] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813326] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813330] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813334] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813337] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.813349] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [140.813526] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [140.814336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [140.814514] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [140.815165] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [140.815320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [140.815514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [140.816098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.816332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.817220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [140.817253] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.818229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [140.819643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.843941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.848775] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.849266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.849406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.850071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.850236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [140.850658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [140.851088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.851095] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.851283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [140.864774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [140.864781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [140.864958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.865187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.866068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [140.866101] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.867043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [140.869804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.894199] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.898748] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.899235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.899374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.913410] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [140.913417] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [140.913987] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.914109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [140.914791] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [140.915265] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [140.915285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.915502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.916391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [140.916425] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.917373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [140.918781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.943103] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.947636] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.948107] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.948228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.948686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.948905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.949314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [140.949350] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.950295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [140.951757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [140.976167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [140.981198] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [140.981683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [140.981789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [140.982431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.982621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [140.982999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [140.983451] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.983459] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [140.983647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [140.997619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [140.997628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [140.997821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [140.998052] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [140.998959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [140.998994] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [140.999946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [141.002429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.026829] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.031796] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.032283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.032423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.032881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.033350] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.034530] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [141.035169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [141.036154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [141.036172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [141.036353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [141.036528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [141.036703] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [141.042327] EDID block 0 is all zeroes

<7> [141.042333] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [141.042341] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042345] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042349] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042353] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042357] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042361] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042364] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042368] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.042380] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [141.042557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [141.043392] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.043569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [141.044229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.044396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.044556] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.045154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.045374] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.046266] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [141.046301] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.047276] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [141.048691] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.072992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.077719] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.078209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.078349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.079014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.079183] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [141.079604] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.080036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.080043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.080231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [141.094175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.094183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [141.094361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.094576] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.095472] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [141.095506] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.096452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [141.099072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.123430] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.128440] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.128883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.128981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.143079] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [141.143086] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [141.143681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.143858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [141.144220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.144640] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [141.144658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.144875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.145765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [141.145799] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.146746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [141.149420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.173815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.178776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.179265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.179404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.179859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.180078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.180548] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [141.180921] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.181947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [141.183131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.207461] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.211916] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.212391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.212542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.213574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.213765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [141.214157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.214604] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.214611] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.214798] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [141.228768] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.228777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [141.228972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.229224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.230146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.231102] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [141.231166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [141.232579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.256975] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.261769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.262260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.262400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.262859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.263325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.264497] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [141.265167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [141.266148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [141.266166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [141.266344] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [141.266519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [141.266694] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [141.272227] EDID block 0 is all zeroes

<7> [141.272233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [141.272241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.272280] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [141.272458] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [141.273292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.273469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [141.274146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.274346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.274539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.275134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.275354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.276241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [141.276274] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.277251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [141.278666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.302964] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.307773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.308261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.308401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.309064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.309255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [141.309674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.310106] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.310113] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.310301] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [141.324221] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.324229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [141.324407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.324623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.325542] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [141.325946] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.326964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [141.329421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.353821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.358771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.359265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.359404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.373373] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [141.373380] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [141.373942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.374064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [141.374777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.375225] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [141.375244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.375462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.376354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [141.376388] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.377337] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [141.380072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.404397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.409449] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.409893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.409991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.410418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.410638] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.411036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [141.411070] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.412018] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [141.413491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.437884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.442784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.443270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.443420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.444106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.444279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [141.444702] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.445164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.445172] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.445359] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [141.459312] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.459320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [141.459512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.459746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.460651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [141.460687] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.461642] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [141.464376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.488787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.493762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.494254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.494393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.494852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.495319] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.496477] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [141.497159] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [141.498148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [141.498165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [141.498345] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [141.498519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [141.498693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [141.504228] EDID block 0 is all zeroes

<7> [141.504234] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [141.504242] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504258] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504265] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.504281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [141.504459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [141.505292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.505471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [141.506139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.506310] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.506503] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.507086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.507318] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.508208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [141.508241] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.509215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [141.511919] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.536225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.540784] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.541270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.541411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.542075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.542237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [141.542659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.543091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.543098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.543286] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [141.557205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.557213] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [141.557390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.557605] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.558519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [141.558929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.559956] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [141.562420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.586811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.591773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.592263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.592403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.606332] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [141.606339] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [141.606901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.607024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [141.607744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.608188] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [141.608208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.608423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.609313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [141.609347] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.610295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [141.612999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.637397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.641844] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.642331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.642471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.642927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.643164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.643478] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [141.643866] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.644893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [141.646131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.670517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.675316] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.675843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.675949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.676586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.676777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [141.677168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.677614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.677621] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.677810] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [141.691773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.691781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [141.691973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.692221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.693113] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [141.693158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.694098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [141.696881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.721283] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.725765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.726251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.726391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.726850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.727316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.728488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [141.729165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [141.730147] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [141.730165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [141.730343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [141.730518] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [141.730693] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [141.736226] EDID block 0 is all zeroes

<7> [141.736232] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [141.736240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.736278] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [141.736456] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [141.737291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.737467] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [141.738145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.738336] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.738473] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.739055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.739288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.740177] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [141.740211] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.741187] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [141.742601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.766909] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.771773] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.772261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.772402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.773067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.773220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [141.773641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [141.774072] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.774079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.774264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [141.788191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [141.788199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [141.788378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.788594] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.789484] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [141.789518] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.790467] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [141.793070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.817403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.822828] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.823374] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.823515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.838032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [141.838038] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [141.838542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.838719] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [141.839080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [141.839526] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [141.839546] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.839762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.840651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [141.840684] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.841632] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [141.843106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.867440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.872443] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.872886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.872985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.873410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.873632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.874029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [141.874063] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.875009] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [141.876480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.900863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.905313] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.905776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.905882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.906524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.906715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [141.907093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [141.907546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.907553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [141.907740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [141.921712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [141.921720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [141.921913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.922159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.923052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [141.923088] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.924053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [141.925544] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.949952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [141.954787] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [141.955276] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [141.955415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [141.955875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [141.956341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [141.957522] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [141.958169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [141.959153] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [141.959171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [141.959350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [141.959525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [141.959700] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [141.965230] EDID block 0 is all zeroes

<7> [141.965235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [141.965244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.965282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [141.965460] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [141.966294] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [141.966471] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [141.967146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [141.967346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [141.967540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [141.968135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [141.968354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [141.969243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [141.969277] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [141.970252] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [141.971668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [141.995963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.000771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.001262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.001403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.002067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.002263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [142.002683] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.003113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.003134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.003307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.017263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.017271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.017448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.017663] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.018552] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [142.018586] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.019535] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [142.020997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.045393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.050496] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.050941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.051040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.065178] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [142.065185] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [142.066048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.066187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [142.066551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.066981] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.067000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.067191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.068048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [142.068083] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.069030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [142.070503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.094904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.099769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.100261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.100401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.100857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.101077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.101539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [142.101925] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.102953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [142.105423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.129810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.135258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.135731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.135837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.136479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.136670] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [142.137051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.137505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.137513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.137700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [142.152093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.152102] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [142.152310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.152545] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.153449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [142.153486] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.154440] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [142.157074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.181427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.186458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.186903] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.187000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.187427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.187880] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.189068] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [142.189760] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.190726] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [142.190744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [142.190926] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [142.191104] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [142.191295] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [142.196813] EDID block 0 is all zeroes

<7> [142.196819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [142.196827] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196850] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196854] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.196866] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [142.197044] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.197892] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.198070] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.198744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.198946] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.199153] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.199737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.199956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.200847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [142.200881] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.201851] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [142.203132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.227428] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.231849] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.232336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.232475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.233436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.233574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [142.233913] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.234359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.234366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.234539] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.248474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.248482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.248661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.248876] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.249767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [142.249802] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.250747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [142.252129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.276498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.280875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.281359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.281499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.295877] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [142.295884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [142.296353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.296531] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [142.296892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.297342] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.297361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.297579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.298526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [142.298902] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.299930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [142.302129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.326480] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.331436] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.331901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.331998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.332423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.332645] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.333043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [142.333078] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.334025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [142.335494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.359878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.364327] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.364790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.364896] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.365538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.365729] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [142.366106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.366561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.366569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.366758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [142.380722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.380730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [142.380923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.381174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.382066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [142.382102] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.383043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [142.384536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.408946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.413779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.414269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.414411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.414869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.415336] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.416520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [142.417167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.418148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [142.418167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [142.418348] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [142.418523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [142.418697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [142.424227] EDID block 0 is all zeroes

<7> [142.424233] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [142.424241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.424279] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [142.424457] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.425293] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.425470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.426149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.426344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.426480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.427058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.427288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.428175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [142.428209] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.429184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [142.430599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.454900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.459766] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.460258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.460399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.461064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.461233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [142.461655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.462087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.462094] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.462283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.475792] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.475800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.475977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.476209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.477088] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [142.477123] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.478072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [142.479542] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.503927] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.508771] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.509260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.509401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.523453] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [142.523460] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [142.524339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.524516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [142.524879] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.525324] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.525344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.525561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.526453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [142.526487] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.527436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [142.528782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.553169] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.558194] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.558720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.558804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.559217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.559436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.559907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [142.560286] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.561300] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [142.562761] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.587164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.590825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.591288] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.591426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.592089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.592257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [142.592678] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.593109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.593130] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.593303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [142.607245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.607252] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [142.607430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.607646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.608560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [142.608969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.609988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [142.611457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.635857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.640698] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.641192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.641332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.641791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.642259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.643429] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [142.644102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.645088] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [142.645106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [142.645295] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [142.645470] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [142.645643] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [142.651231] EDID block 0 is all zeroes

<7> [142.651236] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [142.651244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651260] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651264] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651268] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651271] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.651283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [142.651461] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.652296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.652473] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.653148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.653347] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.653541] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.654139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.654358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.655249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [142.655283] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.656255] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [142.657668] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.681914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.686780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.687262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.687403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.688066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.688234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [142.688655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.689086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.689093] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.689284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.702772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.702780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.702957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.703189] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.704070] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [142.704104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.705052] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [142.706524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.730926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.735774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.736258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.736399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.751008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [142.751015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [142.751526] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.751704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [142.752065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.752510] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.752529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.752745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.753638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [142.753671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.754614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [142.756071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.780398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.785380] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.785837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.785934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.786360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.786581] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.786979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [142.787013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.787961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [142.790422] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.814817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.819294] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.819763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.819869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.820511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.820701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [142.821083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [142.821537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.821545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.821731] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [142.835703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [142.835712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [142.835903] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.836152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.837045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [142.837081] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.838039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [142.839530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.863938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.868769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.869259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.869400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.869858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [142.870326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [142.871508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [142.872167] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [142.873148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [142.873166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [142.873343] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [142.873519] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [142.873694] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [142.879310] EDID block 0 is all zeroes

<7> [142.879315] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [142.879324] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879328] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879332] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879343] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879347] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.879362] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [142.879541] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [142.880376] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [142.880554] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [142.881208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [142.881379] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [142.881572] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [142.882167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.882387] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.883277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [142.883311] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.884284] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [142.885698] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.910005] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.914777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.915266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.915407] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.916071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.916264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [142.916682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [142.917113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.917135] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [142.917307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [142.931234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [142.931242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [142.931422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.931637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.932553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [142.932961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.933988] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [142.935459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [142.959859] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [142.964762] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [142.965253] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [142.965394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [142.979500] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [142.979507] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [142.980386] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.980565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [142.980926] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [142.981374] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [142.981394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [142.981610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [142.982522] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [142.982933] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [142.983951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [142.986423] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.010820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.015774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.016267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.016406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.016862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.017082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.017537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [143.017929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.018957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [143.021419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.045801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.050299] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.050769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.050875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.051832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.052023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [143.052647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.053094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.053102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.053304] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [143.067276] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.067284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [143.067477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.067711] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.068618] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [143.068655] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.069608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [143.071090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.095458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.099875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.100358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.100498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.100957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.101410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.102578] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [143.103251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.104226] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [143.104244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [143.104423] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [143.104597] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [143.104771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [143.110229] EDID block 0 is all zeroes

<7> [143.110235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [143.110243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.110281] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [143.110459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.111292] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.111470] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.112143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.112299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.112492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.113075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.113306] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.114196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [143.114229] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.115204] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [143.116622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.140917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.145767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.146261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.146400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.147065] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.147261] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [143.147679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.148111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.148134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.148305] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.161795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.161803] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.161981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.162214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.163095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [143.163136] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.164070] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [143.165541] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.189942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.194767] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.195260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.195399] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.209369] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [143.209376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [143.210254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.210431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.210793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.211240] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.211260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.211476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.212368] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [143.212402] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.213353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [143.214781] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.239165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.243637] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.244109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.244229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.244685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.244905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.245314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [143.245351] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.246296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [143.247758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.272153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.277139] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.277628] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.277735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.278376] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.278567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [143.278945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.279397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.279405] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.279592] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [143.293550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.293559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [143.293754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.293987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.294892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [143.294929] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.295862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [143.298415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.322833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.327768] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.328262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.328401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.328861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.329328] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.330509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [143.331168] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.332154] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [143.332172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [143.332350] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [143.332524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [143.332699] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [143.338229] EDID block 0 is all zeroes

<7> [143.338235] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [143.338243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338270] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.338282] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [143.338459] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.339296] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.339474] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.340153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.340353] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.340547] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.341141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.341359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.342248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [143.342283] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.343257] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [143.344672] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.368972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.373792] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.374278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.374417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.375081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.375244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [143.375665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.376096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.376102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.376290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.390202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.390209] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.390385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.390601] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.391492] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [143.391525] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.392472] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [143.393780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.418185] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [143.422682] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.423170] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.423310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.438025] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [143.438032] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [143.438258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.438435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.438798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.439239] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.439258] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.439464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [143.440309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [143.440342] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [143.441289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [143.442751] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [143.467212] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<6> [143.469719] [IGT] i915_pm_rpm: finished subtest basic-pci-d3-state, FAIL

<7> [143.482999] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [143.483814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [143.484178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.485110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.486427] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [143.486485] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [143.487073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.488561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.489033] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [143.490270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.491103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.491170] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.491589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [143.494800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.495636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.496231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [143.496822] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [143.499005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.499020] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [143.499391] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [143.499436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [143.500714] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [143.501619] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.502784] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [143.502812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [143.503102] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [143.503409] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [143.503697] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<7> [143.509158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<5> [143.510210] EDID block 0 is all zeroes

<7> [143.510218] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [143.510229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510267] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.510283] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [143.510532] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.511537] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.511752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.512494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.512739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.512975] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.513628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.513881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [143.513923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [143.514173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.514886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.515101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [143.515768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [143.516260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.516269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.516472] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [143.530466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [143.530473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [143.530650] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.530856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 6

<7> [143.530880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [143.531065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.545531] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [143.545540] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [143.545777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.545954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [143.546333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [143.546764] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [143.546783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.546987] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [143.547010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [143.547186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.547623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.547829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [143.547852] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [143.548040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.548712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.548887] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [143.549250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [143.549680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.549687] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [143.549859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [143.563830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [143.563837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [143.564015] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.564238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [143.564261] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [143.564450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.564903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.565374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.566553] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [143.567169] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [143.568157] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [143.568175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [143.568356] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [143.568531] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [143.568705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [143.574310] EDID block 0 is all zeroes

<7> [143.574316] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [143.574323] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574327] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574331] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574335] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574339] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574342] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574346] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574350] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.574361] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [143.574538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [143.575370] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [143.575546] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [143.576207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [143.576406] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [143.576600] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [143.577198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [143.577404] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [143.676279] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [143.676432] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [143.676554] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [143.676703] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [143.676838] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz

<7> [143.676957] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24

<7> [143.677077] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000

<7> [143.677215] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no

<7> [143.677389] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [143.677579] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A]

<7> [143.677757] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [143.677947] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [143.678151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [143.678332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [143.678488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [143.678622] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [143.678762] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [143.678894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [143.679026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [143.679175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [143.679307] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [143.679491] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [143.679678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200)

<7> [143.679865] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235)

<7> [143.680053] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200)

<7> [143.680257] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235)

<7> [143.680441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203)

<7> [143.680585] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209)

<7> [143.680718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [143.680850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [143.680981] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [143.681111] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [143.681299] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [143.681488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [143.681679] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200)

<7> [143.681870] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235)

<7> [143.682059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200)

<7> [143.682263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235)

<7> [143.682430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203)

<7> [143.682573] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209)

<7> [143.682705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [143.682837] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [143.682968] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [143.683100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [143.683255] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000)

<7> [143.683444] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000)

<7> [143.683633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000)

<7> [143.683823] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [143.684011] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B]

<7> [143.684191] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [143.684332] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1)

<7> [143.684464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [143.684596] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1)

<7> [143.684728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288)

<7> [143.684861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)

<7> [143.685017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [143.685249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640)

<7> [143.685440] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800)

<7> [143.685630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640)

<7> [143.685818] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800)

<7> [143.685990] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656)

<7> [143.686148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752)

<7> [143.686282] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480)

<7> [143.686414] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525)

<7> [143.686546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480)

<7> [143.686678] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525)

<7> [143.686809] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490)

<7> [143.686966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492)

<7> [143.687169] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640)

<7> [143.687359] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800)

<7> [143.687550] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640)

<7> [143.687738] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800)

<7> [143.687900] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656)

<7> [143.688033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752)

<7> [143.688178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480)

<7> [143.688310] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525)

<7> [143.688441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480)

<7> [143.688576] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525)

<7> [143.688765] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490)

<7> [143.688957] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492)

<7> [143.689193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [143.689384] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [143.689574] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [143.689716] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [143.689851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175)

<7> [143.689983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175)

<7> [143.690134] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000)

<7> [143.690272] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [143.690433] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3

<7> [143.690591] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3

<7> [143.690798] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642

<7> [143.690982] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27

<7> [143.691177] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [143.691359] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0

<7> [143.691505] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0

<7> [143.691631] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0

<7> [143.691757] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208

<7> [143.691881] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15

<7> [143.692006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [143.692142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0

<7> [143.692322] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0

<7> [143.692505] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0

<7> [143.692710] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [143.692899] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz)

<7> [143.693089] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz)

<7> [143.693264] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [143.693403] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [143.693537] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1

<7> [143.693668] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1

<7> [143.693800] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2

<7> [143.693930] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2

<7> [143.694069] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [143.694302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [143.694492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [143.694681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [143.694869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [143.695059] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [143.695219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [143.695353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [143.695485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [143.695617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [143.695749] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [143.695881] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [143.696033] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [143.696235] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [143.696424] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [143.696615] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000

<7> [143.696803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0

<7> [143.696968] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [143.697100] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [143.697245] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [143.697377] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4

<7> [143.697508] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [143.697670] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [143.697859] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [143.698047] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.698250] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.698439] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.698610] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [143.698750] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:126] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [143.698885] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [143.699017] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [143.699175] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [143.699308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [143.699441] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset]

<7> [143.699627] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [143.699816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0

<7> [143.700007] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [143.700238] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [143.700416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [143.700555] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [143.700688] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64

<7> [143.700819] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [143.700950] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [143.701082] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [143.701269] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [143.701459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [143.701648] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [143.701838] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [143.702023] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [143.702177] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [143.702310] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175

<7> [143.702442] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0

<7> [143.702573] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [143.702703] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [143.702863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [143.703051] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0

<7> [143.703254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [143.703444] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [143.703631] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [143.703805] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.703945] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.704077] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [143.704221] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [143.704353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:126] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [143.704485] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [143.704617] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0

<7> [143.704782] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [143.704973] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [143.705341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [143.705530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [143.705918] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [143.706454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [143.706701] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [143.706886] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [143.707070] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [143.707266] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [143.707450] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [143.707585] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [143.707713] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [143.707840] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [143.707981] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [143.708132] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [143.708268] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [143.708426] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [143.708618] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [143.708806] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1

<7> [143.709245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [143.709417] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [143.710968] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B]

<7> [143.711104] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2

<7> [143.711446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [143.711674] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [143.712672] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [143.713710] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06

<7> [143.714278] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [143.714463] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [143.714647] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1

<7> [143.715679] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK

<7> [143.715859] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2

<7> [143.717658] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful

<7> [143.717783] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1

<7> [143.718525] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B

<7> [143.735587] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [143.735766] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [143.736025] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [143.736292] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [143.736528] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [143.736897] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<6> [143.737575] [IGT] i915_pm_rpm: exiting, ret=98

<6> [143.752371] Console: switching to colour frame buffer device 80x30

Results for igt@i915_pm_rpm@basic-pci-d3-state