Results for igt@i915_pm_rpm@basic-pci-d3-state

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_digital_port_connected+0x2e/0x80 [i915] intel_dp_detect+0x27f/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 0 Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest basic-pci-d3-state: SKIP (0.000s)
Err	(i915_pm_rpm:5290) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active Subtest basic-pci-d3-state: SKIP (0.000s)
Dmesg	<6> [78.907564] Console: switching to colour dummy device 80x25 <6> [78.907614] [IGT] i915_pm_rpm: executing <7> [78.915314] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [78.915751] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [78.915769] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [78.915898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.916363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.916818] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [78.916890] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [78.916902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [78.917027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.917527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [78.918023] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [78.918652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [78.920001] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [78.921091] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [78.921837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [78.922007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [78.922181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [78.922335] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [78.922961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.923143] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [78.923210] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [78.923223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [78.923347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.924479] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [78.924611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [78.925307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [78.925837] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [78.925842] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [78.925970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [78.952727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [78.952732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [78.952850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.952988] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [78.956617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [78.956633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [78.956765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.957233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.957374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [78.957900] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [78.957914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [78.958043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.958547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [78.959047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [78.959684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [78.960785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [78.961873] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [78.962629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [78.962805] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [78.962951] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [78.963082] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [78.963690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.963869] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [78.964317] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [78.964331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [78.964536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.965722] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [78.965853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [78.966621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [78.967104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [78.967108] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [78.967221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [78.995600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [78.995605] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [78.995724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.995862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [78.996172] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [78.996185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [78.996310] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.996837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [78.996990] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [78.997015] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [78.997029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [78.997187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [78.997698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [78.998199] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [78.998835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [79.000001] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [79.001086] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [79.001684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [79.001849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [79.001983] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [79.002125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [79.002744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [79.002925] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [79.002952] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [79.002964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [79.003088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [79.004187] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [79.004340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [79.005095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [79.005589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [79.005593] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [79.005734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [79.033039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [79.033043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [79.033161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [79.033300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [90.080990] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.088885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.113546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.121228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.121490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.122454] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [90.122329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.123684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.124518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.124805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.125231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.125985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.126671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.127002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.127318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.128154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.128963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.129589] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [90.134328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.158981] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.164769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.164949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.165113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.165594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.166166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.166323] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.166487] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.167120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.167290] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.168605] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.168916] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [90.170462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.194953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.201089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.201327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.201971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.202640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.203187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.205334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.206034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.206572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.206977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.207194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.207510] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.208223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.208615] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.208644] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.208843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.210402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.210636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.211393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.211984] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.211992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.212218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.238542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.238547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.238666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.238957] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.239976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.241303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.265691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.271010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.271181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.271309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.271785] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.272367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.272615] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.272805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.273387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.273593] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.275457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.276130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.300535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.306377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.306520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.307028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.307215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.307238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.307398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.307959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.308490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.309039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.310470] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.311298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.311862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.312060] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.312233] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.312403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.313047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.313228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.313249] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.313486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.314672] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.314825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.315553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.316041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.316047] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.316192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.342983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.342988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.343104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.343248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.345311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.345349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.346845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.371476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.376318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.376434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.376967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.377112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.377167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.377291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.377791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.378290] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.378913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.380178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.381286] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.382058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.382217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.382357] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.382544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.383192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.383337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.383352] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.383498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.384685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.384858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.385572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.386055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.386060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.386177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.412401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.412407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.412563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.412776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.414348] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.414394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.415819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.440210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.445610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.445719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.446186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.446327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.446346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.446501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.446994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.447538] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.448074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.449336] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.450447] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.451079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.451238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.451378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.451539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.452147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.452317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.452334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.452534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.453644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.453809] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.454649] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.455166] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.455173] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.455294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.483120] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.483125] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.483241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.483384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.485005] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.485036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.486435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.510817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.516033] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.516140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.516660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.516834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.516890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.517042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.517588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.518074] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.518702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.519873] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.520953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.521732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.521891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.522069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.522237] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.522856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.523027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.523043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.523166] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.523922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.524107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.524469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.524966] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.524971] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.525088] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.552409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.552414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.552591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.552795] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.554388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.554494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.555798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.580172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.585020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.585126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.585649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.585823] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.585864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.585991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.586512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.587010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.587640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.588788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.589883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.590623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.590781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.590920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.591094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.591743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.591915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.591931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.592056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.593186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.593319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.594073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.594572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.594578] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.594722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.624191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.624196] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.624311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.624508] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.626620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.626652] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.628038] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.652442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.658347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.658457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.658928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.659072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.659091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.659216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.659699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.660249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.660833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.662020] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.662996] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.663761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.663954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.664124] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.664260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.664865] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.665014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.665030] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.665155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.666222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.666342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.667063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.667564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.667570] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.667689] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.693957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.693962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.694077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.694220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.696315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.696346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.697789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.722184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.726942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.727050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.727535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.727710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.727729] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.727901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.728408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.728938] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.729550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.730718] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.731786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.732581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.732749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.732885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.733016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.733685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.733853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.733869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.733996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.735121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.735253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.735985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.736498] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.736505] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.736654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.763981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.763986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.764102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.764244] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.766854] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.766904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.768290] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.792682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.798048] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.798170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.798703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.798894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.798913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.799038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.799517] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.800020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.800648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.801790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.802885] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.803623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.803782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.803921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.804057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.804697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.804875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.804891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.805018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.806130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.806273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.806991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.807501] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.807506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.807626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.833855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.833860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.833991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.834135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.836183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.836214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.837436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.861869] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.866932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.867038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.867525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.867699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.867718] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.867871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.868404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.868901] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.869462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.870629] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.871458] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.872223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.872381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.872543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.872703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.873325] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.873527] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.873543] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.873679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.874819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.874980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.876201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.876747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.876753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.876895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.903154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.903158] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.903273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.903417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.905009] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.905069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.906415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [90.930826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [90.936096] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [90.936203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.936773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.936968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [90.936988] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [90.937114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.937615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [90.938098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [90.938710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [90.939789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [90.940602] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [90.941232] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [90.941391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [90.941560] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [90.941724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [90.942380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.942540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [90.942556] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [90.942707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [90.943871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.944012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [90.945240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [90.945824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.945832] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [90.946001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [90.972280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [90.972285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [90.972402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [90.972618] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [90.974723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [90.974757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [90.976086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.000477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.006307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.006409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.006966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.007185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.007205] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.007367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.007910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.008397] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.008998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.010280] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.011375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.012140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.012330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.012516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.012652] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.013239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.013383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.013399] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.013554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.014695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.014851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.016054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.016655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.016661] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.016823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.041947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.041952] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.042068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.042211] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.044285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.044315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.046474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.070842] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.076053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.076174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.076715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.076897] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.076917] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.077041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.077525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.078024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.078652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.079789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.080589] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.081365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.081564] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.081714] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.081847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.082526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.082683] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.082698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.082823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.083958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.084075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.084819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.085358] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.085365] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.085511] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.113399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.113405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.113534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.113724] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.115327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.115364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.116800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.141166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.146026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.146149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.146680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.146864] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.146884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.147008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.147491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.147992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.148621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.149789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.150885] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.151623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.151790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.151925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.152095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.152725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.152895] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.152910] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.153033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.154149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.154306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.155070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.155586] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.155591] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.155718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.184676] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.184681] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.184797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.184941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.185966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.186012] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.187413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.211766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.216468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.216574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.217068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.217235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.217254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.217379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.217892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.218379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.218980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.220259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.221350] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.221969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.222130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.222270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.222405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.223074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.223221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.223237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.223366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.224514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.224643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.225369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.225855] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.225860] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.225977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.254353] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.254358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.254512] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.254734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.256325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.256361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.257797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.282164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.286953] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.287060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.287545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.287720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.287739] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.287898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.288485] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.288976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.289553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.290708] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.291799] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.292603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.292773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.292908] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.293040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.293710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.293881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.293896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.294019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.295131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.295250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.295961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.296537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.296545] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.296715] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.322965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.322970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.323115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.323259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.325297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.325341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.326774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.351203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.356046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.356168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.356708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.356894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.356913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.357037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.357520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.358020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.358647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.359789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.360883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.361622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.361780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.361920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.362094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.362742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.362916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.362932] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.363055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.364163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.364313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.365000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.365510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.365515] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.365656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.394630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.394635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.394752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.394895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.396393] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.396455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.397900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.422271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.426963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.427072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.427555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.427730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.427749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.427907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.428406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.428906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.429473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.430642] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.431740] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.432456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.432614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.432754] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.432888] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.433559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.433706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.433722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.433851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.434964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.435088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.435801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.436273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.436278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.436396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.464882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.464887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.465004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.465148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.466646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.466692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.468102] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.492490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.497820] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.497931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.498414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.498586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.498607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.498741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.499286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.499771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.500333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.501459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.502493] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.503268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.503448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.503594] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.503736] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.504400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.504567] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.504584] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.504717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.505871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.505997] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.506694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.507254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.507262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.507406] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.536386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.536392] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.536533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.536717] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.538308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.538342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.540434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.564828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.570027] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.570148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.570702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.570919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.570946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.571076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.571560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.572059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.572672] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.573791] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.574897] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.575674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.575834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.576016] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.576184] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.576801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.576947] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.576962] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.577086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.578217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.578701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.579444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.579943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.579948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.580062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.607983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.607988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.608105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.608248] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.609287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.609346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.610835] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.635208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.640017] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.640122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.640636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.640795] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.640814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.640973] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.641516] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.641989] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.642601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.643725] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.644808] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.645573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.645731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.645871] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.646006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.646680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.646827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.646843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.646970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.648082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.648202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.648868] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.649350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.649355] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.649487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.677386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.677391] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.677568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.677745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.679322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.679353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.680774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.705162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.710526] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.710645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.711112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.711254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.711273] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.711394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.711935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.712490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.713026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.714135] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.715184] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.715815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.715975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.716148] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.716346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.716962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.717103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.717119] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.717241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.717982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.718100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.718785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.719278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.719283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.719396] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.747916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.747921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.748037] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.748181] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.749731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.749762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.751087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.775466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.781359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.781503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.781971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.782111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.782130] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.782251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.782747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.783269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.783794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.785045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.786157] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.786946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.787105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.787245] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.787381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.787983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.788168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.788184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.788345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.789477] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.789600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.790350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.790853] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.790859] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.790976] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.819372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.819377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.819536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.819728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.821773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.821805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.823087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.847478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.853405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.853547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.854013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.854154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.854173] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.854297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.854810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.855344] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.855882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.856955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.857933] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.858710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.858902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.859077] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.859212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.859817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.859965] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.859981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.860109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.861218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.861337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.862048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.862599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.862605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.862721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.890647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.890652] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.890768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.890911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.892410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.892453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.893842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.918182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.923059] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.923165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.923664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.923845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.923864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.924023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.924560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.925009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.925585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.926762] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.927786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [91.928398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [91.928571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [91.928709] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [91.928844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [91.929480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.929657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [91.929673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [91.929799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.930910] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.931053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [91.931789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [91.932287] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.932292] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [91.932409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [91.961346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [91.961351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [91.961517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.961710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [91.963290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [91.963321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [91.965473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [91.989865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [91.995017] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [91.995123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.995621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [91.995802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [91.995820] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [91.995996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [91.996520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [91.997018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [91.997631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [91.998789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [91.999884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.000623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.000791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.000927] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.001096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.001729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.001872] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.001887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.002012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.003111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.003228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.003892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.004388] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.004393] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.004556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.031310] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.031315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.031457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.031636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.033226] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.033257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.034438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.058944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.064034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.064170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.064664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.064846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.064865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.065023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.065562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.066012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.066582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.067731] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.068785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.069581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.069740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.069879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.070014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.070655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.070834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.070850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.070980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.072091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.072233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.072954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.073469] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.073475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.073591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.099297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.099301] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.099417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.099606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.101189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.101220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.102437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.126915] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.131952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.132059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.132540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.132720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.132738] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.132897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.133393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.133879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.134478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.135460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.136456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.137144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.137303] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.137471] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.137604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.138188] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.138328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.138343] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.138553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.139701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.139819] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.140587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.141069] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.141074] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.141188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.169644] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.169649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.169764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.169908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.171415] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.171460] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.172868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.197176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.202010] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.202118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.202603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.202784] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.202802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.202979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.203545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.203981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.204552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.205672] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.206765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.207559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.207726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.207863] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.207995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.208629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.208803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.208818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.208942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.210048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.210192] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.211385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.211900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.211905] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.212019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.239338] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.239342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.239501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.239694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.241264] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.241310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.243474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.267866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.273049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.273189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.273688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.273868] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.273887] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.274053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.274662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.275121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.275698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.276790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.277935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.278712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.278873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.279013] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.279148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.279798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.279977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.279993] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.280122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.281234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.281363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.282138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.282661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.282666] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.282781] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.311789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.311794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.311911] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.312054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.313608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.313672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.315040] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.339402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.345304] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.345404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.345958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.346168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.346194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.346326] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.346812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.347326] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.347926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.349091] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.350173] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.350965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.351135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.351270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.351454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.352071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.352214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.352229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.352352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.353548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.353704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.354451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.354934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.354940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.355053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.383975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.383980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.384096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.384240] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.386280] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.386326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.388466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.412835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.417995] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.418108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.418610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.418767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.418787] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.418958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.419494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.419952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.420530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.421791] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.422900] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.423674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.423840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.423987] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.424130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.424815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.424970] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.424987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.425119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.426231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.426360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.427123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.427600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.427605] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.427719] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.452337] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.452342] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.452471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.452665] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.454243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.454275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.456490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.480860] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.486058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.486165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.486663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.486880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.486912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.487097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.487582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.488081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.488693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.489789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.490899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.491663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.491821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.491960] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.492095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.492746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.492920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.492936] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.493059] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.494167] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.494309] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.495130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.495643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.495649] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.495763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.524135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.524140] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.524256] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.524401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.525979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.526026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.527414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.551764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.557001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.557107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.557594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.557776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.557795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.557971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.558552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.559002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.559581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.560757] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.561785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.562457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.562619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.562759] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.562895] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.563540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.563719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.563736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.563865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.564980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.565108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.565803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.566313] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.566320] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.566465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.592187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.592192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.592308] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.592497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.594025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.594071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.595435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.619770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.625035] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.625157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.625699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.625919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.625939] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.626064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.626548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.627048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.627676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.628789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.629899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.630457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.630626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.630760] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.630891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.631543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.631730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.631745] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.631869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.632977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.633116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.633909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.634474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.634481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.634623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.662519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.662525] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.662640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.662783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.664291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.664322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.665785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.690151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.695154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.695260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.695755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.695938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.695956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.696130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.696665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.697131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.697707] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.698869] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.699953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.700574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.700733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.700873] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.701006] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.701648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.701825] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.701841] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.701967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.703083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.703202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.703892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.704439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.704446] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.704578] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.733040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.733046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.733161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.733305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.734803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.734880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.736358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.760719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.766088] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.766210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.766751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.766970] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.766989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.767114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.767596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.768097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.768724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.769892] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.770963] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.771730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.771898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.772033] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.772203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.772840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.772984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.773000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.773125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.773883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.774000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.774697] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.775249] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.775256] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.775388] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.803835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.803842] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.803958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.804101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.805654] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.805700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.807085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.831471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.836796] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.836900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.837371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.837549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.837569] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.837712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.838242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.838769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.839305] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.840460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.841456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.842101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.842259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.842399] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.842562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.843174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.843314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.843330] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.843552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.844712] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.844846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.845601] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.846096] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.846101] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.846215] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.874040] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.874044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.874160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.874302] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.875874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.875920] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.877340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.901732] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.906523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.906632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.907128] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.907306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.907325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.907486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.907996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.908522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.909103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.910224] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.911355] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.912000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.912159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.912299] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.912513] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.913144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.913287] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.913302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.913439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.914602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.914769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.915463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.915945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.915951] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.916063] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [92.943450] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.943455] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [92.943571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.943713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [92.944737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [92.944784] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [92.946086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [92.970447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [92.976327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [92.976454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.976965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.977146] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [92.977165] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [92.977292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.977801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [92.978288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [92.978889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [92.980159] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [92.981255] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [92.981994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [92.982153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [92.982293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [92.982480] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [92.983101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [92.983248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [92.983264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [92.983390] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [92.984556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.984713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [92.985437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [92.985958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [92.985963] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [92.986076] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.012913] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.012918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.013049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.013191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.014718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.014764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.016126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.040516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.046394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.046525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.047083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.047240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.047258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.047380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.047900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.048454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.048964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.050091] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.051194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.051829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.052021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.052160] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.052295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.052902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.053045] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.053060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.053185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.054874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.054992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.056258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.056739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.056744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.056858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.083100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.083105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.083221] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.083364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.084408] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.084507] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.085854] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.110215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.115034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.115142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.115637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.115820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.115866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.115994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.116513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.117014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.117625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.118789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.119884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.120623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.120782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.120922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.121096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.121747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.121892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.121908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.122031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.123150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.123306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.123953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.124520] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.124525] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.124639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.151482] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.151487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.151603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.151745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.153286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.153335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.154792] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.179145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.184026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.184133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.184619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.184781] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.184813] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.184989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.185553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.185990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.186565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.187735] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.188797] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.189590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.189747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.189886] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.190021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.190663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.190843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.190859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.190986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.192117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.192239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.192958] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.193470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.193475] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.193594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.218773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.218778] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.218893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.219036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.220567] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.220599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.222086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.246499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.251825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.251929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.252401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.252561] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.252580] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.252735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.253266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.253790] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.254338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.255459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.256456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.257260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.257418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.257578] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.257738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.258360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.258544] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.258575] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.258714] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.259862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.259992] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.261181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.261752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.261758] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.261900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.287575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.287580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.287696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.287839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.288888] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.288910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.290359] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.314693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.320077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.320198] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.320742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.321004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.321030] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.321163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.321666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.322148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.322775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.324061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.324855] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.325687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.325848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.325986] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.326121] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.326753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.326900] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.326916] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.327043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.328165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.328289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.328628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.329146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.329153] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.329282] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.356569] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.356575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.356692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.356835] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.358343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.358389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.359865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.384265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.389070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.389193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.389753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.389967] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.389993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.390121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.390606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.391105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.391718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.392872] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.393968] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.394741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.394900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.395039] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.395203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.395840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.395988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.396004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.396131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.396846] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.396965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.397738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.398209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.398214] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.398331] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.426241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.426246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.426363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.426583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.428154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.428185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.429440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.453865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.459030] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.459138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.459622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.459797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.459816] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.459943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.460501] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.461013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.461541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.462695] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.463788] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.464437] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.464596] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.464735] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.464870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.465471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.465655] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.465671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.465832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.466943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.467086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.467821] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.468302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.468307] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.468436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.493553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.493558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.493675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.493818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.494866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.494888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.496317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.520668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.526080] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.526202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.526736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.526927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.526946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.527071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.527552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.528054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.528683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.529789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.530884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.531622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.531790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.531955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.532118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.532721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.532905] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.532921] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.533050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.534194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.534348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.535054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.535557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.535562] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.535679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.562474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.562479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.562594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.562737] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.563766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.563811] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.565089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.589494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.595416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.595555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.596021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.596161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.596179] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.596301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.596819] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.597365] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.597959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.599160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.600136] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.600828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.601021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.601198] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.601334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.601938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.602084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.602099] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.602225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.603297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.603417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.604137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.604639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.604645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.604764] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.631049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.631054] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.631170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.631313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.632851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.632926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.634417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.658821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.664052] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.664173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.664703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.664893] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.664913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.665038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.665548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.666020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.666648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.667788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.668882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.669624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.669782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.669920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.670094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.670732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.670879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.670896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.671022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.672118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.672238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.672961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.673458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.673464] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.673580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.701408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.701413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.701569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.701791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.703349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.703380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.704803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.729198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.734070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.734193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.734726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.734919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.734938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.735062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.735587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.736044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.736686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.737788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.738884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.739624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.739783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.739920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.740095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.740733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.740879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.740895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.741021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.742172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.742292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.743029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.743550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.743555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.743699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.773253] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.773258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.773373] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.773599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.775149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.775180] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.776444] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.800916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.806627] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.806746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.807214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.807354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.807373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.807553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.808083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.808642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.809127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.810251] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.811323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.811814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.812021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.812156] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.812288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.812916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.813075] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.813091] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.813217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.814369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.814501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.815201] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.815735] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.815741] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.815858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.841045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.841050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.841168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.841311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.843407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.843489] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.844802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.868569] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.873937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.874044] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.874530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.874704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.874723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.874850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.875368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.875956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.876446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.877489] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.878456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.879219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.879416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.879570] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.879705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.880292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.880448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.880464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.880593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.881724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.881847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.882551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.883065] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.883073] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.883244] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.912273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.912279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.912395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.912600] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.914196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.914227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.915438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [93.939772] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [93.945070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [93.945193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.945729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.945958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [93.945985] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [93.946114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.946599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [93.947099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [93.947726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [93.949056] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [93.950165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [93.950937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [93.951137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [93.951308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [93.951462] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [93.952051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.952196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [93.952212] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [93.952338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [93.953519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.953700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [93.954414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [93.954897] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.954902] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [93.955019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [93.983504] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [93.983509] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [93.983626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [93.983770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [93.984820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [93.984842] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [93.986306] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.010696] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.016147] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.016252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.016800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.016988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.017007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.017180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.017732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.018185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.018761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.019910] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.020874] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.021624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.021792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.021929] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.022061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.022724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.022898] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.022914] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.023037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.024146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.024300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.025109] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.026146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.026153] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.026338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.055330] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.055336] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.055474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.055722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.057288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.057320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.058791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.083163] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.088036] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.088142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.088638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.088799] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.088831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.089007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.089531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.090032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.090662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.091789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.092891] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.093669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.093830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.093970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.094143] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.094782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.094928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.094944] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.095074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.096214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.096382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.097137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.097635] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.097640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.097758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.124037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.124043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.124159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.124303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.125360] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.125438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.126908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.151307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.155541] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.155646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.156135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.156284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.156304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.156483] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.157032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.157551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.158101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.159250] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.160045] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.160689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.160851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.160990] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.161125] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.161764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.161942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.161958] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.162087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.163186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.163334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.164119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.165143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.165151] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.165288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.194241] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.194246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.194362] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.194580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.196164] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.196210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.197454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.221767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.225978] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.226086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.226645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.226863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.226882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.227007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.227490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.227990] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.228619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.229789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.230935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.231712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.231883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.232019] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.232151] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.232786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.233005] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.233021] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.233147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.234252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.234372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.235118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.235599] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.235604] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.235721] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.263634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.263639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.263755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.263897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.265396] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.265455] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.266874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.291235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.296145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.296251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.296751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.296934] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.296954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.297079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.297628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.298180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.298677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.299791] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.300884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.301555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.301747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.301885] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.302016] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.302616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.302786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.302801] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.302925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.304614] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.304733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.305470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.305977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.305982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.306109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.333997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.334002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.334117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.334261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.335291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.335321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.336753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.361149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.366003] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.366109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.366609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.366790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.366810] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.366985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.367564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.368014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.368591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.369734] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.370696] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.371311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.371509] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.371658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.371791] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.372413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.372625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.372654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.372778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.373923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.374069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.375348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.375828] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.375833] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.375948] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.401609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.401614] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.401730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.401874] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.403383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.403414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.404906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.429302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.435271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.435376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.435919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.436077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.436097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.436270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.436866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.437316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.437905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.439042] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.439841] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.440472] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.440640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.440775] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.440906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.441521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.441715] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.441731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.441887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.443523] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.443643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.444378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.444899] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.444904] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.445021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.472382] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.472387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.472561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.472739] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.474310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.474341] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.475767] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.500165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.505130] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.505238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.505733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.505914] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.505933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.506110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.506660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.507111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.507688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.508789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.509884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.510676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.510833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.510974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.511107] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.511774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.511922] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.511937] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.512064] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.513180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.513299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.513998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.514989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.514994] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.515111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.541882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.541887] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.542003] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.542146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.543179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.543210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.545474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.569872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.575137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.575243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.575741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.575923] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.575942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.576118] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.576667] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.577118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.577693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.578956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.580040] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.580819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.580978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.581155] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.581323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.581927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.582074] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.582090] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.582215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.583353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.583486] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.584231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.584739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.584744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.584863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.613320] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.613325] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.613471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.613655] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.615204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.615235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.616437] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.640895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.646053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.646177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.646718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.646909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.646928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.647053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.647535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.648036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.648651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.649788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.650883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.651455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.651624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.651761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.651893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.652550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.652740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.652755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.652881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.653986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.654126] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.654945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.655467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.655473] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.655631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.682399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.682404] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.682530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.682722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.684291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.684322] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.686473] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.710866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.716141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.716247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.716746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.716928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.716947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.717074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.717622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.718173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.718699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.719790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.720896] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.721666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.721836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.721972] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.722104] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.722704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.722916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.722931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.723091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.724169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.724285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.724644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.725142] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.725147] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.725274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.753192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.753197] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.753313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.753511] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.755577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.755607] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.756999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.781394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.785538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.785641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.786159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.786328] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.786347] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.786488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.786986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.787511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.788092] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.789329] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.790121] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.790760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.790929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.791064] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.791195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.791862] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.792035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.792050] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.792173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.793265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.793383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.794124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.794602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.794607] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.794724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.820428] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.820435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.820550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.820693] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.822201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.822231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.823438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.847890] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.853138] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.853244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.853776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.853942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.853961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.854137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.854661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.855160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.855788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.856953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.858040] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.858822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.858981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.859150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.859317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.859921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.860065] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.860081] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.860210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.861357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.861521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.862232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.862760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.862765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.862943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.890279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.890285] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.890401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.890567] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.892658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.892693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.894085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.918478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.924400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.924541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.925008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.925149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.925168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.925289] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.925808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.926304] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.926844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.927954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.929038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.929844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.930041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.930179] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.930314] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.930916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.931060] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.931076] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.931202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.932277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.932397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [94.933108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [94.933591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.933597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [94.933749] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [94.959996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [94.960002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [94.960117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.960261] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [94.961813] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [94.961872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [94.963309] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [94.987706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [94.992513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [94.992622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.993118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.993295] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [94.993314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [94.993478] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [94.993988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [94.994529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [94.995095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [94.996345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [94.997453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [94.998257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [94.998462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [94.998604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [94.998738] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [94.999326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [94.999486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [94.999502] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [94.999629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.000833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.000964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.002177] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.002717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.002723] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.002866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.031274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.031279] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.031394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.031612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.033694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.033754] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.035086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.059478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.065403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.065545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.066013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.066153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.066172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.066293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.066809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.067325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.067872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.069136] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.070160] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.070937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.071133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.071272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.071481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.072069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.072214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.072230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.072358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.073447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.073569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.074265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.074781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.074787] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.074930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.100050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.100055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.100172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.100314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.101349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.101379] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.102857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.127256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.132038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.132146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.132631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.132813] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.132833] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.133006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.133554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.134028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.134708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.135864] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.137439] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.138205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.138366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.138557] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.138724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.139313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.139484] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.139501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.139630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.140768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.140888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.142118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.143193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.143199] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.143314] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.173429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.173436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.173582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.173725] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.174760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.174805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.176253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.200675] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.206054] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.206177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.206713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.206904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.206923] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.207051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.207563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.208035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.208648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.209789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.210884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.211623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.211780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.211919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.212092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.212741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.212884] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.212900] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.213022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.213734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.213853] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.214636] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.215087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.215092] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.215205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.242570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.242575] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.242691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.242833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.244332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.244363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.245779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.270142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.275145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.275252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.275783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.275956] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.275975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.276149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.276699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.277173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.277785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.278934] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.279717] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.280365] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.280547] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.280683] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.280814] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.281477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.281666] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.281682] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.281805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.283446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.283574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.284259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.284788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.284793] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.284907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.311691] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.311696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.311812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.311955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.312971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.313014] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.314435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.338778] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.344031] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.344168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.344666] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.344847] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.344866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.345025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.345539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.346039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.346652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.347787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.348882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.349622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.349779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.349918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.350091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.350725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.350877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.350894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.351022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.352120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.352242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.353379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.353970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.353975] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.354119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.381479] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.381484] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.381615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.381758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.383256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.383287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.385434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.409769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.415034] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.415159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.415701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.415919] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.415938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.416065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.416549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.417049] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.417661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.418787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.419882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.420621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.420780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.420919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.421094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.421740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.421887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.421903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.422028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.423781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.423911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.424647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.425133] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.425138] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.425251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.451482] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.451487] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.451603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.451746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.453253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.453283] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.455438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.479832] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.484992] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.485133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.485681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.485858] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.485877] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.486051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.486603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.487076] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.487689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.488788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.489883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.490457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.490625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.490762] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.490893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.491542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.491728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.491744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.491867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.492986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.493132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.494335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.494866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.494871] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.494985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.520709] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.520714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.520830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.520973] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.522553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.522575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.524031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.548354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.553049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.553148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.553708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.553866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.553885] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.554058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.554611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.555081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.555716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.556876] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.557953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.558767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.558925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.559066] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.559201] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.559841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.560020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.560036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.560162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.561287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.561406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.562144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.562623] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.562628] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.562745] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.589553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.589558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.589673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.589816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.591315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.591345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.592776] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.617139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.622039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.622148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.622636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.622816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.622835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.623008] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.623574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.624011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.624587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.625746] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.626787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.627592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.627761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.627897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.628029] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.628665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.628839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.628855] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.628980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.630093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.630233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.631012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.631525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.631530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.631644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.659490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.659497] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.659627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.659770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.661268] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.661298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.663502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.687932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.693025] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.693147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.693691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.693882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.693902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.694026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.694511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.695010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.695622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.696789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.697884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.698623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.698780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.698920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.699095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.699732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.699883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.699899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.700025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.701130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.701278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.701924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.702468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.702474] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.702590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.730511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.730516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.730632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.730775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.732283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.732313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.733816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.758167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.763039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.763146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.763641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.763824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.763843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.764019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.764544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.765043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.765656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.766788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.767883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.768624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.768783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.768923] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.769096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.769735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.769881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.769897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.770024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.770742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.770861] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.771191] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.771706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.771712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.771828] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.796408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.796413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.796542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.796735] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.798253] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.798284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.800492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.824920] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.830077] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.830200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.830738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.830929] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.830948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.831073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.831556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.832055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.832669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.833789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.834892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.835457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.835615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.835755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.835891] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.836613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.836755] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.836771] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.836894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.838012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.838142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.838920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.839466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.839472] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.839600] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.866950] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.866955] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.867072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.867216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.868800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.868847] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.870241] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.894633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.900049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.900170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.900711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.900902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.900921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.901046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.901527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.902028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.902641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.903789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.904749] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.905543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.905711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.905847] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.905979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.906616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.906790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.906806] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.906931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.908039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.908179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.909387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.909951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.909957] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.910071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [95.936839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.936844] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [95.936974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.937117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [95.938669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [95.938692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [95.940087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [95.964488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [95.970410] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [95.970548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.971014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.971155] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [95.971174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [95.971295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.971812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [95.972346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [95.972906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [95.974044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [95.975153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [95.975786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [95.975979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [95.976156] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [95.976293] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [95.976909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [95.977050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [95.977065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [95.977190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [95.978293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.978409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [95.979130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [95.980151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [95.980156] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [95.980271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.007022] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.007027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.007143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.007286] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.008866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.008913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.010321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.034720] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.040049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.040172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.040699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.040915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.040935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.041101] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.041597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.042086] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.042727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.044018] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.044954] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.045710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.045867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.046007] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.046174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.046822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.046966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.046981] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.047105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.048263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.048415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.049157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.049681] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.049699] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.049813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.078829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.078834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.078950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.079092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.080670] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.080692] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.082086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.106470] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.111284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.111386] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.111898] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.112041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.112090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.112215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.112754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.113198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.113810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.114956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.116043] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.116827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.116985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.117125] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.117300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.117955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.118097] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.118113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.118238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.119364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.119551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.120250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.120755] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.120760] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.120876] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.147648] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.147653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.147769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.147912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.148926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.148972] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.150385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.174735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.180083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.180205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.180744] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.180927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.180947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.181072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.181553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.182055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.182683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.183789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.184884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.185623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.185790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.185926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.186058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.186756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.186899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.186915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.187038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.188139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.188256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.188611] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.189128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.189133] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.189248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.215503] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.215508] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.215624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.215766] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.216790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.216836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.218239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.242646] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.248074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.248195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.248736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.248894] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.248913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.249074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.249560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.250059] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.250686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.251789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.252886] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.253623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.253781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.253921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.254055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.254727] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.254872] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.254888] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.255017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.256132] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.256252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.256950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.257488] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.257493] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.257613] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.283887] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.283892] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.284007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.284149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.285703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.285735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.287110] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.311487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.316833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.316936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.317467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.317648] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.317668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.317792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.318256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.318787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.319376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.320706] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.321837] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.322625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.322786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.322925] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.323061] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.323735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.323883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.323899] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.324028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.325144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.325273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.325991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.326539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.326546] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.326678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.356151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.356156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.356273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.356417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.358014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.358060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.359435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.383834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.389677] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.389796] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.390262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.390403] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.390435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.390582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.391075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.391620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.392127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.393248] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.394323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.394967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.395125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.395265] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.395465] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.396054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.396199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.396215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.396341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.397441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.397564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.398243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.398737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.398743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.398895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.425164] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.425169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.425285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.425456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.427003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.427053] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.428415] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.452837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.458633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.458752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.459220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.459361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.459380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.459562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.460103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.460658] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.461136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.462259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.463324] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.464084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.464243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.464382] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.464532] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.465119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.465263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.465279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.465405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.466569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.466690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.467393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.467906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.467912] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.468029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.496527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.496532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.496649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.496791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.497830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.497862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.499281] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.523654] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.529081] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.529203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.529743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.529926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.529946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.530071] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.530554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.531055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.531683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.532787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.533883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.534622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.534780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.534919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.535083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.535716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.535868] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.535884] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.536010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.537145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.537300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.538000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.538548] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.538553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.538747] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.565526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.565531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.565659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.565802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.567302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.567349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.568793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.593188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.598151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.598257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.598752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.598913] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.598945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.599108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.599645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.600094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.600670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.601788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.602882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.603456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.603614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.603752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.603887] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.604527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.604706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.604722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.604851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.605965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.606110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.606844] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.607344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.607349] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.607479] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.633720] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.633725] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.633841] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.633984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.635004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.635088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.636419] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.660873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.666640] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.666760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.667228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.667369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.667388] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.667568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.668089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.668637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.669144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.670270] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.671366] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.672029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.672187] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.672326] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.672490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.673103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.673243] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.673259] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.673384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.675063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.675181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.676385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.676960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.676965] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.677079] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.706060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.706065] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.706182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.706324] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.707883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.707914] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.709337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.733747] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.739491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.739601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.740073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.740218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.740237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.740361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.740860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.741413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.741991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.743091] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.744178] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.744942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.745101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.745278] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.745414] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.746072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.746217] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.746234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.746360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.747534] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.747655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.748350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.748856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.748861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.748978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.775193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.775198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.775314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.775485] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.777062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.777093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.778446] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.802769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.808617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.808737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.809206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.809347] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.809365] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.809543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.810041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.810597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.811106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.812230] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.813325] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.814097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.814302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.814457] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.814594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.815180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.815324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.815340] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.815493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.816602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.816724] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.817440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.817933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.817938] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.818055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.846490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.846496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.846627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.846770] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.848269] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.848317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.849799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.874193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.879626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.879746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.880213] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.880353] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.880372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.880552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.881047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.881620] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.882168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.883289] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.884391] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.885171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.885363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.885516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.885690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.886278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.886441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.886462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.886591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.887279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.887401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.888098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.888624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.888630] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.888746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.917757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.917762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.917877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.918020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.919054] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.919113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.920435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [96.944769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [96.950133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [96.950239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.950738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.950912] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [96.950931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [96.951080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.951617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [96.952067] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [96.952643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [96.953789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [96.954892] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [96.955681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [96.955849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [96.955986] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [96.956117] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [96.957290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.957455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [96.957471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [96.957626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [96.958832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.958948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [96.959674] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [96.960162] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.960167] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [96.960281] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [96.988712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [96.988718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [96.988835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [96.988979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [96.990001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [96.990033] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [96.991436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.015804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.022111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.022244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.022759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.022933] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.022952] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.023100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.023634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.024084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.024675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.025794] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.026899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.027692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.027860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.027995] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.028126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.028767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.028971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.028987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.029110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.030218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.030358] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.031143] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.032139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.032145] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.032262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.060690] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.060695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.060812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.060954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.061969] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.062001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.063414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.087761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.093618] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.093738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.094206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.094345] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.094364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.094545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.095042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.095622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.096107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.097234] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.098324] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.098973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.099131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.099270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.099405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.100009] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.100153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.100169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.100298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.101465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.101590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.102291] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.102816] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.102822] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.102938] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.131353] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.131358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.131486] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.131677] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.133256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.133288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.135475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.159844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.165668] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.165775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.166243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.166383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.166401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.166582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.167080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.167661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.168145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.169282] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.170375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.171200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.171360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.171525] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.171686] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.172269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.172410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.172439] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.172636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.173785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.174342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.174727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.175232] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.175237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.175350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.203216] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.203221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.203337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.203514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.205091] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.205123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.206442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.230815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.236075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.236197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.236725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.236905] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.236924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.237049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.237533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.238032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.238660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.239789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.240887] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.241659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.241817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.241955] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.242090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.242746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.242952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.242967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.243091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.244199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.244316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.245038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.245549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.245555] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.245699] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.274114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.274119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.274234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.274377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.275496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.275542] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.276904] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.301296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.305494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.305603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.306074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.306218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.306237] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.306360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.306858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.307399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.307934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.309265] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.310371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.311138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.311323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.311516] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.311653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.312242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.312385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.312401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.312546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.313659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.313781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.314498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.314987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.314993] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.315143] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.343041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.343046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.343163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.343305] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.344832] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.344863] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.346089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.370582] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.377011] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.377117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.377639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.377828] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.377848] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.378010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.378535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.378996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.379573] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.380701] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.381786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.382551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.382709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.382848] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.382983] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.383661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.383808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.383824] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.383951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.385063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.385184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.385872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.386362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.386367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.386502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.411660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.411665] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.411781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.411923] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.412973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.412995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.414438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.438538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.444959] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.445063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.445585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.445759] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.445778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.445936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.446448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.446920] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.447497] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.448635] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.449736] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.450349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.450519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.450658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.450793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.451419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.451616] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.451632] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.451759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.452860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.453003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.453738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.454231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.454237] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.454353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.480638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.480643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.480759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.480902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.481928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.481974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.483386] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.507749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.513124] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.513230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.513747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.513934] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.513953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.514112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.514651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.515102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.515677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.516787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.517886] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.518691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.518849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.518988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.519123] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.519765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.519945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.519961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.520087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.521197] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.521316] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.522060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.522579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.522585] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.522702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.548960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.548964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.549080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.549224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.550257] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.550332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.551815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.576209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.581615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.581736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.582204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.582343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.582362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.582544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.583077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.583599] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.584106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.585227] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.586323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.587095] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.587254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.587405] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.587549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.588162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.588304] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.588351] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.588534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.589680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.589835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.590592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.591119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.591124] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.591240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.619702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.619708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.619824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.619968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.620996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.621026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.622436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.646770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.651527] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.651637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.652133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.652312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.652332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.652473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.652942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.653483] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.654049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.655158] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.655979] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.656600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.656769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.656905] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.657037] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.657671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.657878] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.657894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.658020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.659137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.659257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.659979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.660502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.660507] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.660647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.686896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.686901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.687017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.687159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.688200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.688275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.690477] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.714851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.720035] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.720173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.720670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.720851] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.720870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.721031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.721579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.722077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.722689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.723789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.724888] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.725466] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.725651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.725786] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.725917] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.727085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.727232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.727248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.727373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.728530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.728647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.729312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.729813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.729820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.729957] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.757868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.757873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.757990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.758132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.759721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.759765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.761087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.785466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.791402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.791544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.792012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.792153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.792172] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.792293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.792836] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.793321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.793859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.794955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.795917] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.796688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.796879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.797081] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.797228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.797856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.798041] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.798058] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.798184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.799274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.799395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.800122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.800634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.800641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.800817] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.828172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.828177] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.828293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.828487] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.830597] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.830663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.832047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.855469] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.861389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.861529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.861997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.862139] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.862158] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.862279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.862816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.863302] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.863843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.864955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.866085] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.866724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.866912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.867115] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.867262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.867874] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.868071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.868087] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.868217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.869306] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.869442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.870139] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.870660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.870667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.870815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.896607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.896612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.896728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.896871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.898386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.898501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.899890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.924223] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [97.929026] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [97.929164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.929662] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.929845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [97.929864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [97.930025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.930539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [97.931039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [97.931656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [97.932789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [97.933885] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [97.934627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [97.934785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [97.934924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [97.935099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [97.935737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.935908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [97.935925] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [97.936054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [97.937163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.937283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [97.937971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [97.938969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.938977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [97.939109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [97.967507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [97.967513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [97.967645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [97.967787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [97.969302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [97.969348] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [97.970821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [97.995204] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.000075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.000213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.000733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.000910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.000929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.001088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.001604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.002103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.002715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.003867] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.004955] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.005711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.005869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.006008] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.006182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.006832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.006976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.006991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.007114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.008228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.008344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.009138] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.009609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.009614] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.009727] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.037077] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.037082] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.037197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.037556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.039109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.039140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.040435] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.064838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.069970] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.070079] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.070563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.070743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.070762] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.070920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.071452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.071941] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.072554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.073708] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.074786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.075414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.075612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.075761] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.075892] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.076543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.076731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.076747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.076871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.077978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.078117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.078896] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.079385] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.079390] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.079519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.105213] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.105218] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.105334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.105522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.107082] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.107113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.108436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.132767] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.138015] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.138121] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.138647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.138821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.138839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.138998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.139512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.140014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.140630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.141788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.142883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.143712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.143871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.144010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.144146] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.144786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.144964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.144980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.145109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.146212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.146356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.147069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.147618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.147624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.147754] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.175634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.175639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.175754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.175898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.177397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.177457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.178920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.203287] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.208137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.208243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.208767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.208945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.208964] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.209122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.209634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.210134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.210746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.211898] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.212908] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.213675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.213834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.213974] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.214110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.214785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.214932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.214948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.215074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.216184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.216304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.216637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.217008] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.217013] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.217130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.245546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.245553] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.245684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.245826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.247325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.247356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.248778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.273151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.278506] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.278626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.279094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.279234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.279253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.279374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.279914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.280461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.281000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.282317] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.283452] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.284217] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.284375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.284527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.284662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.285248] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.285392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.285408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.285595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.286748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.286875] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.287586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.288080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.288085] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.288202] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.313886] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.313891] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.314007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.314150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.315183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.315213] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.316452] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.340883] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.346049] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.346179] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.346701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.346845] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.346864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.346990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.347543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.348014] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.348592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.349718] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.350671] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.351285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.351474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.351611] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.351742] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.352350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.352517] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.352534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.352670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.353801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.353918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.354651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.355105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.355110] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.355223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.380901] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.380906] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.381021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.381164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.382194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.382224] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.383439] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.407837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.413042] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.413167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.413709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.413926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.413945] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.414072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.414557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.415055] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.415665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.416788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.417883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.418623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.418781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.418919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.419054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.419726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.419873] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.419889] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.420018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.421135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.421257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.421979] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.422493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.422499] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.422618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.449959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.449964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.450079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.450222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.451255] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.451285] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.453466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.477879] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.483040] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.483178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.483700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.483876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.483896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.484054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.484562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.485062] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.485676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.486789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.487925] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.488692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.488849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.488988] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.489122] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.489795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.489941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.489957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.490086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.491200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.491323] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.492064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.492545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.492551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.492668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.520524] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.520531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.520665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.520808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.521830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.521892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.523375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.547747] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.553068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.553191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.553729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.553888] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.553929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.554055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.554540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.555039] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.555666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.556788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.557882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.558624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.558783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.558922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.559057] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.559697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.559875] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.559891] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.560018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.561134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.561255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.561585] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.562080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.562085] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.562201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.591125] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.591130] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.591245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.591388] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.592935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.593019] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.594393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.618744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.624596] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.624703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.625170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.625312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.625331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.625499] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.626050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.626642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.627106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.628247] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.629347] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.630134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.630293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.630445] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.630607] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.631196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.631381] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.631397] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.631590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.632732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.632901] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.633635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.634147] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.634155] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.634280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.660537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.660542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.660658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.660801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.661833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.661890] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.663326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.687706] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.693073] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.693196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.693735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.693954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.693974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.694098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.694581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.695081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.695709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.696876] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.697973] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.698623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.698785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.698924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.699058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.699736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.699883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.699898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.700027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.701134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.701253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.701944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.702466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.702472] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.702589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.728267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.728272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.728388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.728577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.730163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.730194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.731507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.755943] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.761064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.761188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.761729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.761951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.761970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.762094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.762577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.763077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.763705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.764875] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.765980] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.766760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.766919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.767057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.767232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.767879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.768053] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.768068] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.768194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.769335] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.769485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.770161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.770661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.770666] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.770809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.798657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.798663] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.798794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.798938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.799974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.800006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.801438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.825789] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.831140] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.831247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.831740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.831916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.831935] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.832082] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.832620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.833071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.833645] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.834788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.835883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.836680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.836838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.836977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.837111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.837761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.837963] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.837979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.838102] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.839200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.839339] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.840110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.841107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.841112] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.841227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.870218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.870224] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.870340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.870558] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.872142] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.872174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.873436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.897881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.903636] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.903758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.904225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.904367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.904385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.904565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.905090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.905634] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.906141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.907282] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.908389] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.909167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.909375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.909527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.909662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.910249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.910394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.910410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.910558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.911631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.911751] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.912474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.912962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.912968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.913084] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [98.942086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.942091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [98.942206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.942349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [98.943393] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [98.943430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [98.944906] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [98.969299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [98.974573] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [98.974694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.975162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.975303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [98.975321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [98.975475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.976020] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [98.976580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [98.977058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [98.978180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [98.979275] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [98.980043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [98.980201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [98.980340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [98.980490] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [98.981079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [98.981223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [98.981239] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [98.981404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [98.982571] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.982691] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [98.983374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [98.983872] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [98.983878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [98.983994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.010242] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.010247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.010363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.010549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.012123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.012155] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.013438] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.037799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.043615] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.043734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.044202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.044341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.044360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.044536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.045065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.045640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.046112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.047231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.048323] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.048936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.049133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.049273] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.049409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.050011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.050156] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.050172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.050300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.051472] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.051594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.052295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.052830] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.052836] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.052985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.079744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.079750] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.079866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.080008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.081038] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.081069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.082436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.106775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.112018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.112127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.112612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.112806] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.112826] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.112956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.113515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.113976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.114550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.115788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.116887] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.117622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.117779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.117918] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.118052] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.118729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.118876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.118892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.119021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.120137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.120257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.120582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.121084] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.121089] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.121206] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.149603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.149610] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.149738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.149879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.150910] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.150953] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.152341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.176745] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.182018] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.182126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.182615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.182785] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.182805] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.182960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.183479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.183948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.184523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.185787] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.186899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.187664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.187823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.187962] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.188096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.188768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.188915] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.188931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.189057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.190171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.190292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.191011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.191534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.191540] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.191656] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.218408] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.218413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.218541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.218734] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.220304] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.220335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.221752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.246150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.251088] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.251196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.251696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.251877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.251896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.252046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.252634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.253071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.253647] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.254789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.255883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.256678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.256838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.256977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.257111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.257765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.257970] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.257986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.258111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.259220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.259336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.260105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.261104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.261109] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.261226] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.290193] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.290198] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.290328] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.290546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.292116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.292147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.293436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.317893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.323145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.323251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.323748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.323929] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.323948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.324096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.324634] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.325084] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.325660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.326788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.327915] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.328680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.328839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.328979] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.329113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.329779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.329925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.329941] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.330068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.331179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.331298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.331943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.332519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.332524] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.332641] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.361618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.361624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.361740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.361882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.363380] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.363410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.364857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.389259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.394590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.394711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.395177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.395317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.395336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.395491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.396023] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.396567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.397074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.398177] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.399271] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.399882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.400077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.400216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.400351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.400999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.401145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.401161] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.401287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.402451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.402579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.403273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.403804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.403810] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.403926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.431279] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.431284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.431399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.431617] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.433188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.433218] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.435460] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.459824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.465053] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.465175] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.465726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.465887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.465906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.466031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.466556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.467063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.467686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.468788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.469893] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.470657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.470815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.470954] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.471087] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.471778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.471950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.471965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.472089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.472801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.472920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.473243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.474248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.474253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.474366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.502827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.502832] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.502947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.503090] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.504641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.504672] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.506087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.530451] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.536340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.536450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.536930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.537071] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.537090] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.537213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.537752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.538239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.538833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.539957] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.541052] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.541831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.542029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.542194] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.542331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.542959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.543129] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.543145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.543271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.544381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.544516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.545217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.545753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.545758] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.545875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.573815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.573820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.573937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.574081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.575637] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.575669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.577086] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.601497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.606327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.606446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.606977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.607122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.607176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.607303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.607832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.608317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.608968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.610133] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.611164] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.611957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.612115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.612254] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.612445] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.613104] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.613245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.613261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.613384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.614540] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.614694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.615396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.615905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.615910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.616023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.645013] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.645018] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.645134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.645279] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.646833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.646864] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.648292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.672695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.678082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.678188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.678706] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.678863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.678882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.679030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.679568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.680020] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.680595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.681766] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.682860] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.683623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.683780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.683920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.684054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.684700] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.684879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.684895] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.685021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.686133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.686275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.686969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.687502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.687508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.687625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.715507] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.715512] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.715629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.715772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.717279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.717325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.718780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.743146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.748137] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.748244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.748747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.748921] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.748940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.749095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.749677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.750114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.750690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.751867] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.752969] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.753757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.753916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.754055] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.754190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.754830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.755007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.755023] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.755152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.756263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.756383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.757134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.758109] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.758115] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.758232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.785024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.785029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.785145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.785288] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.786842] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.786906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.788335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.812693] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.818134] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.818240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.818733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.818908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.818928] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.819077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.819615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.820064] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.820640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.821789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.822573] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.823386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.823561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.823701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.823836] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.824435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.824580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.824596] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.824761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.825905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.826025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.826744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.827265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.827270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.827386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.855865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.855870] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.855986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.856128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.857713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.857744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.859087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.883479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.889359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.889472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.889942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.890087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.890105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.890232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.890716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.891227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.891847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.892986] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.894088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.894828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.895001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.895140] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.895274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.895949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.896094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.896110] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.896236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.897396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.897530] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.898232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.898760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.898765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.898882] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.927257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.927262] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.927377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.927595] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.929175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.929206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [99.930436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [99.954931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [99.960630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [99.960751] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.961215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.961355] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [99.961374] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [99.961554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.962076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [99.962622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [99.963128] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [99.964252] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [99.965324] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [99.966135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [99.966295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [99.966460] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [99.966622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [99.967205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.967385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [99.967401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [99.967586] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [99.969230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.969346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [99.970089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [99.970603] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.970608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [99.970751] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [99.998028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [99.998033] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [99.998149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [99.998292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [99.999324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [99.999370] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.000825] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.025227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.031092] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.031221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.031730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.031893] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.031913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.032043] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.032625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.033081] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.033665] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.034925] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.036043] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.036832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.036997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.037137] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.037273] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.037973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.038122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.038141] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.038268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.039377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.039512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.040253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.041228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.041234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.041351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.067645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.067650] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.067768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.067912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.069453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.069488] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.070903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.095282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.101233] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.101340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.101883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.102042] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.102061] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.102220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.102758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.103209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.103785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.104937] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.106040] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.106833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.106991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.107130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.107264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.107918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.108123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.108139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.108264] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.109961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.110093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.110420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.110916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.110922] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.111038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.139411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.139416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.139591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.139798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.141346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.141377] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.142788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.167182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.172038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.172147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.172630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.172792] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.172812] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.172970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.173498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.173956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.174527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.175790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.176575] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.177216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.177374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.177528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.177663] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.178288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.178484] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.178501] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.178628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.179739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.179886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.180581] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.181097] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.181102] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.181221] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.209080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.209085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.209201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.209344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.210395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.210482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.211942] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.236284] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.241149] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.241256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.241754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.241928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.241948] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.242097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.242635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.243085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.243661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.244789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.245883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.246676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.246836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.246975] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.247110] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.247793] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.247981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.247998] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.248123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.249236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.249353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.250066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.250579] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.250584] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.250729] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.275819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.275824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.275940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.276082] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.277112] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.277188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.278441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.302907] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.308038] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.308161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.308702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.308862] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.308881] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.309005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.309529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.310035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.310663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.311788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.312883] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.313624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.313781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.313922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.314056] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.314730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.314877] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.314893] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.315019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.316125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.316245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.316933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.317437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.317442] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.317560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.344352] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.344357] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.344485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.344676] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.346256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.346287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.348476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.372870] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.378598] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.378706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.379173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.379314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.379332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.379488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.380018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.380609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.381072] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.382163] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.382958] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.383762] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.383951] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.384091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.384227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.384830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.384975] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.384991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.385116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.386224] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.386345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.387063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.387602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.387608] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.387728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.412944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.412949] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.413066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.413210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.414240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.414313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.415786] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.440187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.445084] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.445209] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.445752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.445970] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.445989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.446114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.446598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.447098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.447726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.449041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.449969] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.450734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.450892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.451031] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.451195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.451831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.451981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.451997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.452123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.453235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.453387] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.454084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.454585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.454591] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.454732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.482642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.482648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.482764] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.482908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.483956] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.483978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.485410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.509761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.515054] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.515177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.515716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.515908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.515927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.516052] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.516534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.517036] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.517663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.518788] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.519882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.520624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.520783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.520922] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.521097] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.521745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.521916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.521931] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.522054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.523204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.523324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.524018] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.524522] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.524528] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.524671] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.551427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.551432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.551548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.551690] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.553221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.553252] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.554759] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.579160] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.584037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.584160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.584691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.584882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.584902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.585028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.585509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.586011] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.586640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.587789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.588884] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.589623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.589781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.589921] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.590095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.590734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.590881] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.590897] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.591025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.591738] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.591857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.592546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.593079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.593085] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.593201] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.618864] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.618869] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.618985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.619128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.620692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.620724] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.622087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.646481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.651815] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.651917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.652387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.652547] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.652567] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.652735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.653271] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.653770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.654319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.655459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.656457] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.657075] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.657233] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.657372] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.657520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.658109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.658252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.658268] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.658446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.659584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.659708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.660437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.660934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.660939] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.661056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.687336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.687341] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.687470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.687662] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.689239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.689270] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.690440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.714918] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.720629] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.720748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.721214] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.721357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.721375] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.721558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.722093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.722654] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.723132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.724260] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.725326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.725945] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.726142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.726282] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.726417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.727042] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.727195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.727211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.727333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.728512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.728629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.729332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.729825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.729830] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.729958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.758969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.758974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.759090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.759233] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [100.760797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.760819] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.762274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [100.786700] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [100.792019] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [100.792126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.792612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.792774] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.792794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.792921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.793474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <6> [100.793706] [IGT] i915_pm_rpm: exiting, ret=77 <7> [100.793944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.794537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6> [100.795389] Console: switching to colour frame buffer device 128x48 <7> [100.795653] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.796765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.797576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.797742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.797882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.798017] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.798692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.799107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.799125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.799256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.800420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.800586] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.801263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.801761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.801768] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.801883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.833060] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.833065] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.833185] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.833325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.833361] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [100.833532] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.834056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.834199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [100.834278] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [100.834402] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.834886] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.835402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.836001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [100.837160] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [100.838285] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [100.839049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [100.839208] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.839346] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.839544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.840160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.840303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [100.840319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [100.840455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.841634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.841785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [100.842520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [100.842973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.842977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [100.843121] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [100.871032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [100.871037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [100.871153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [100.871291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 6 <7> [100.871512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [100.871699] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [100.872189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [100.872803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [100.872952] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [100.873083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [100.873680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

Created at 2023-07-30 22:41:07