Results for igt@kms_force_connector_basic@force-connector-state

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version
IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out
Opened device: /dev/dri/card0
Starting subtest: force-connector-state
Subtest force-connector-state: SUCCESS (0.146s)
Err
Starting subtest: force-connector-state
Subtest force-connector-state: SUCCESS (0.146s)
Dmesg
<6> [116.519015] Console: switching to colour dummy device 80x25
<6> [116.519317] [IGT] kms_force_connector_basic: executing
<7> [116.562519] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.563004] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [116.563198] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.564022] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [116.564062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.564116] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.564443] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
<7> [116.564600] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.565088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.565283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.565653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.565824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.565829] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.565974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.567535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.567540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.567824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.567840] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.567847] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.567851] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.567855] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.567860] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.567895] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.567911] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.568069] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
<7> [116.568215] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.568595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.568739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.569064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.569209] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.569213] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.569370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.570710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.570714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.570914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.570929] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.570933] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.570937] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.570941] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.570944] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.570986] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.571001] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.571157] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
<7> [116.571337] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.571689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.571832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.572161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.572394] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.572399] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.572561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.573875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.573880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.574079] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.574094] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.574099] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.574103] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.574106] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.574110] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6> [116.574418] [IGT] kms_force_connector_basic: starting subtest force-connector-state
<7> [116.578297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.578316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.578696] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.578842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.579174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.579386] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.579399] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.579560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.580908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.580912] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.581075] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.581529] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1]
<7> [116.581546] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [116.581708] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1] disconnected
<7> [116.581970] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.581985] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.582143] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
<7> [116.582321] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.582687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.582833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.583162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.583336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.583340] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.583503] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.584841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.584845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.585045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.585060] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.585065] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.585069] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.585073] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.585077] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.585094] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.585109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.585461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.585605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.585935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.586079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.586083] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.586247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.587591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.587595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.587741] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.587770] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1]
<7> [116.587785] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [116.587943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1] disconnected
<7> [116.650102] [drm:drm_mode_setcrtc] [CRTC:45:pipe A]
<7> [116.650172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)
<7> [116.650361] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0)
<7> [116.650572] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [116.650725] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no)
<7> [116.650881] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0)
<7> [116.651036] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0)
<7> [116.651193] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000)
<7> [116.651400] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [116.651604] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0)
<7> [116.651760] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0)
<7> [116.651927] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0)
<7> [116.652081] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0)
<7> [116.652267] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0)
<7> [116.652502] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0)
<7> [116.652655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0)
<7> [116.652805] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0)
<7> [116.652955] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0)
<7> [116.653105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0)
<7> [116.653273] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0)
<7> [116.653468] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0)
<7> [116.653617] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0)
<7> [116.653766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0)
<7> [116.653914] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0)
<7> [116.654067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0)
<7> [116.654256] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0)
<7> [116.654423] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0)
<7> [116.654575] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0)
<7> [116.654726] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0)
<7> [116.654875] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0)
<7> [116.655024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0)
<7> [116.655183] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0)
<7> [116.655392] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0)
<7> [116.655546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [116.655704] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [116.655853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [116.656002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)
<7> [116.656151] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0)
<7> [116.656307] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0)
<7> [116.656475] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0)
<7> [116.656624] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset
<7> [116.656773] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A
<7> [116.656939] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 400000 kHz, actual 400000 kHz
<7> [116.657091] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0
<7> [116.657260] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset]
<7> [116.657421] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no
<7> [116.657669] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A
<7> [116.667065] i915 0000:00:02.0: [drm:g4x_dp_port_enabled [i915]] No pipe for DP port B found
<7> [116.667223] i915 0000:00:02.0: [drm:g4x_dp_port_enabled [i915]] No pipe for DP port C found
<7> [116.667424] i915 0000:00:02.0: [drm:g4x_dp_port_enabled [i915]] No pipe for DP port D found
<7> [116.685491] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A]
<7> [116.685663] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A
<7> [116.686026] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:77:CRT]
<7> [116.686181] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:78:HDMI B]
<7> [116.686412] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:86:DP B]
<7> [116.686577] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:76:VGA-1]
<7> [116.686731] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A
<7> [116.686887] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B
<7> [116.687073] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]
<7> [116.687286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.687590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.687752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.688007] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.688171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.688480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.688642] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.688876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.689039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.689297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.689476] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.689709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.689871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.690105] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.690286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.690551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.690713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.690970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.691145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.691404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.691568] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.691798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.691964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.692196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.692383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.692586] [drm:drm_mode_setcrtc] [CRTC:60:pipe B]
<7> [116.692658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.692826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.693066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.693244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.693490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.693658] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.693915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.694087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.694354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.694526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.694755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.694927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.695168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.695343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.695597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.695759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.696016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.696189] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.696451] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.696619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.696853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.697020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.697266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.697462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.697694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.697857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.698051] [drm:drm_mode_setcrtc] [CRTC:75:pipe C]
<7> [116.698143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.698330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.698574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.698742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.698978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.699141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.699392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.699565] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.699802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.699968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.700272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.700447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.700694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.700857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.701091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.701294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.701578] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.701741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.701976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.702136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.702449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.702612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.703001] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing
<7> [116.703009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.703174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.703623] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.703832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.704213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.704431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.704459] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.704606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.706122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.706135] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.706322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.706585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.706602] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.706608] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.706613] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.706617] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.706621] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.706659] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.706771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.707142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.707368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.707745] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.707906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.707917] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.708062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.709398] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.709409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.709554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.709766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.709781] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.709786] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.709790] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.709794] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.709797] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.709940] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 1 or reprobing
<7> [116.709947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.709962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] status updated from connected to disconnected
<7> [116.710355] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] disconnected
<7> [116.710465] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.710496] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] disconnected
<7> [116.710675] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 1 to 0 or reprobing
<7> [116.710681] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.710697] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.710870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.711029] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.711175] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.711371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.711545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] status updated from disconnected to connected
<7> [116.711715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.712019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.712170] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.712600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.712865] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.712874] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.713098] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.715021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.715030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.715321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.715646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.715673] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.715682] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.715690] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.715698] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.715706] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.715772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.715797] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.716037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.716300] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.716531] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.716751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.717002] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.717422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.717589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.717924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.718071] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.718075] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.718248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.719675] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.719681] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.719827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.720043] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.720058] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.720063] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.720067] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.720071] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.720074] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6> [116.720443] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS
<7> [116.720587] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [116.720951] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [116.720958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.720975] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.721135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.721360] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.721525] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.721671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.721844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.722200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.722415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.722760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.722906] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.722911] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.723056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.724570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.724576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.724723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.724942] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.724958] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.724964] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.724968] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.724973] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.724977] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.725012] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.725027] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.725183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.725407] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.725582] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.725726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.725911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.726254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.726408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.726746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.726893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.726897] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.727043] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.728405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.728410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.728556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.728769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.728784] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.728789] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.728793] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.728797] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.728801] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.728905] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset
<7> [116.728936] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.728952] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.729108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.729344] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.729504] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.729657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.729823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.730173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.730383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.730759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.730904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.730908] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.731055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.732406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.732412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.732559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.732772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.732787] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.732792] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.732796] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.732800] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.732803] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.732977] [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.732983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.733000] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.733157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.733837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.733982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.734363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.734508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.734513] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.734653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.736135] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.736141] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.736342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.736524] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.736570] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.736585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.736735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.737204] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.737424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.737774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.737919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.737923] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.738068] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.739430] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.739435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.739580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.739737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.739844] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:HDMI-A-1] EDID override reset
<7> [116.739865] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.739880] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.740031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.740404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.740557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.740884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.741026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.741030] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.741169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.742557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.742562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.742708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.742868] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.742989] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:87:DP-1] EDID override reset
<7> [116.743010] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1]
<7> [116.743026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [116.743181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.743381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.743571] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1] disconnected
<6> [116.744095] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [116.744375] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing
<7> [116.744382] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.744399] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.744589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.744754] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
<7> [116.744900] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.745045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.745213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.745618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.745763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.746098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.746266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.746274] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.746444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.747909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.747914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.748059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.748348] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.748365] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.748370] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.748375] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.748380] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.748384] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.748444] [drm:status_store] [CONNECTOR:79:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [116.748450] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.748465] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.748620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.748982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.749127] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.749501] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.749647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.749652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.749794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.751291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.751298] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.751448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on
<7> [116.751611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.751835] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [116.752407] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:76:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36)
<7> [116.752575] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1
<7> [116.752726] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0
<7> [116.752879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)
<7> [116.753031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1)
<7> [116.753182] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [116.753370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes)
<7> [116.753565] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1)
<7> [116.753716] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288)
<7> [116.753868] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002)
<7> [116.754017] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [116.754166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024)
<7> [116.754367] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344)
<7> [116.754568] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024)
<7> [116.754718] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344)
<7> [116.754867] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048)
<7> [116.755016] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184)
<7> [116.755164] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768)
<7> [116.755331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806)
<7> [116.755516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768)
<7> [116.755672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806)
<7> [116.755816] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771)
<7> [116.755961] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777)
<7> [116.756105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024)
<7> [116.756297] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344)
<7> [116.756490] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024)
<7> [116.756639] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344)
<7> [116.756787] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048)
<7> [116.756935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184)
<7> [116.757082] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768)
<7> [116.757249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806)
<7> [116.757438] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768)
<7> [116.757586] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806)
<7> [116.757734] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771)
<7> [116.757882] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777)
<7> [116.758030] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [116.758178] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [116.758488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [116.758663] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)
<7> [116.758813] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800)
<7> [116.758962] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800)
<7> [116.759111] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800)
<7> [116.759281] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset
<7> [116.759467] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz)
<7> [116.759623] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 400000 kHz, actual 400000 kHz
<7> [116.759779] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0
<7> [116.759926] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:45:pipe A] allocated PCH DPLL A
<7> [116.760072] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A
<7> [116.760249] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset]
<7> [116.760422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB
<7> [116.760579] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7> [116.760725] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>
<7> [116.760869] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [116.761014] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0
<7> [116.761158] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0
<7> [116.761361] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64
<7> [116.761529] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0
<7> [116.761681] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [116.761826] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2
<7> [116.761971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.762115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.762355] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa
<7> [116.762515] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.762665] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa
<7> [116.762814] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800
<7> [116.762962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0
<7> [116.763109] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [116.763273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0
<7> [116.763444] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0xc4100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09
<7> [116.763592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [116.763740] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [116.763889] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [116.764037] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.764185] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.764362] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.764529] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [116.764677] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:92] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [116.764831] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [116.764987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0
<7> [116.765138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no
<7> [116.765302] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no
<7> [116.765584] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on
<7> [116.765770] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:77:CRT]
<7> [116.765918] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:78:HDMI B]
<7> [116.766063] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:86:DP B]
<7> [116.766209] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A
<7> [116.766421] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B
<7> [116.767178] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A
<7> [116.767558] i915 0000:00:02.0: [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR before link train 0x0
<7> [116.767730] i915 0000:00:02.0: [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x100
<7> [116.767880] i915 0000:00:02.0: [drm:ivb_manual_fdi_link_train [i915]] FDI train 1 done, level 0.
<7> [116.768043] i915 0000:00:02.0: [drm:ivb_manual_fdi_link_train [i915]] FDI_RX_IIR 0x600
<7> [116.768194] i915 0000:00:02.0: [drm:ivb_manual_fdi_link_train [i915]] FDI train 2 done, level 0.
<7> [116.768369] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done.
<7> [116.768543] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A]
<7> [116.768692] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A
<7> [116.820566] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:76:VGA-1]
<7> [116.820733] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]
<7> [116.820942] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A
<7> [116.821293] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
<7> [116.821335] [drm:drm_client_modeset_probe]
<7> [116.821687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1]
<7> [116.821735] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1
<7> [116.821969] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
<7> [116.822117] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug
<7> [116.822666] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.822812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry
<7> [116.823144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<7> [116.823369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.823374] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.823537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1
<7> [116.825064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
<7> [116.825069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0
<7> [116.825367] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes :
<7> [116.825387] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [116.825393] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [116.825397] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [116.825402] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [116.825406] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [116.825411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1]
<7> [116.825426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:79:HDMI-A-1]
<7> [116.825780] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.825928] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [116.826244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [116.826393] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.826398] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [116.826544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [116.827989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [116.827994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [116.828145] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:HDMI-A-1] disconnected
<7> [116.828161] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1]
<7> [116.828176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:87:DP-1]
<7> [116.828475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:87:DP-1] disconnected
<7> [116.828491] [drm:drm_client_modeset_probe] connector 76 enabled? yes
<7> [116.828495] [drm:drm_client_modeset_probe] connector 79 enabled? no
<7> [116.828498] [drm:drm_client_modeset_probe] connector 87 enabled? no
<7> [116.828594] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [116.828610] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 76
<7> [116.828613] [drm:drm_client_modeset_probe] looking for preferred mode on connector 76 0
<7> [116.828616] [drm:drm_client_modeset_probe] found mode 1024x768
<7> [116.828619] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config
<7> [116.828649] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0)
<6> [116.854165] Console: switching to colour frame buffer device 128x48
Created at 2023-07-30 22:41:06