Results for igt@kms_force_connector_basic@force-edid

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-edid Subtest force-edid: SUCCESS (0.021s)
Err	Starting subtest: force-edid Subtest force-edid: SUCCESS (0.021s)
Dmesg	<6> [107.748059] Console: switching to colour dummy device 80x25 <6> [107.748418] [IGT] kms_force_connector_basic: executing <7> [107.752165] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [107.752762] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [107.752967] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [107.753502] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing <7> [107.753512] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.753548] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.753729] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.753870] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.754221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.754412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.754789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.754979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.754985] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.755124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.756841] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.756846] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.757044] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.757060] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.757066] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.757070] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.757075] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.757079] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.757109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.757124] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.757273] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.757674] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.758008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.758162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.758573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.758759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.758763] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.758901] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.760555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.760560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.760733] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.760746] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.760751] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.760755] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.760759] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.760762] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.760823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.760837] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.760973] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.761096] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.761427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.761549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.761863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.762009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.762013] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.762180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.763907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.763911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.764096] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.764110] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.764114] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.764118] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.764122] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.764126] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [107.764423] [IGT] kms_force_connector_basic: starting subtest force-edid <7> [107.764545] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 2 or reprobing <7> [107.764552] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.764749] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.764885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.765212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.765406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.765423] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.765564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.767156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.767167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.767413] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.767428] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.767433] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.767438] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.767442] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.767445] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.767492] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.767730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.767850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.768200] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.768374] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.768384] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.768521] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.770047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.770058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.770234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.770248] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.770252] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.770256] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.770260] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.770264] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.774232] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:76:VGA-1] EDID override set <7> [107.774254] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.774593] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:76:VGA-1] ELD monitor IGT <7> [107.774601] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:76:VGA-1] ELD size 24, SAD count 0 <7> [107.774776] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.774784] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE <7> [107.774795] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.774801] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE <7> [107.774810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.774829] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa <7> [107.774835] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [107.774841] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.774847] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.774852] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.775008] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset <7> [107.775107] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.775331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.775476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.775765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.775900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.775909] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.776062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.777785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.777795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.777962] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa <7> [107.777967] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE <7> [107.777973] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 <7> [107.777978] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE <7> [107.777984] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.777997] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.778001] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.778005] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.778009] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.778013] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.778140] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 2 to 0 or reprobing <7> [107.778146] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.778161] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.778324] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.778466] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.778814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.778937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.779426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.779612] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.779616] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.779740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.781597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.781603] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.781783] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.781797] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.781802] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.781807] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.781811] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.781815] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.781849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.781863] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.781999] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.782122] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.782414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.782549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.782869] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.783003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.783007] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.783133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.784716] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.784722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.784927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.784941] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.784946] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.784949] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.784953] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.784956] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [107.785249] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS <7> [107.785435] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [107.785771] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing <7> [107.785779] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.785795] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.785933] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.786072] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.786371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.786519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.786830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.786964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.786968] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.787095] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.788794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.788800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.788979] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.788993] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.788998] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.789003] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.789007] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.789011] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.789045] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.789059] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.789197] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.789362] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.789759] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.789880] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.790205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.790377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.790384] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.790549] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.792080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.792086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.792276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.792290] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.792295] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.792322] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.792329] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.792335] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.792455] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:76:VGA-1] EDID override reset <7> [107.792475] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.792490] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.792630] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.792766] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.793088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.793225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.793594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.793717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.793721] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.793847] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.795336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.795351] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.795528] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.795542] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.795546] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.795551] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.795555] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.795558] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.795668] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:79:DP-1] EDID override reset <7> [107.795689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:DP-1] <7> [107.795704] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:79:DP-1] <7> [107.795848] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:79:DP-1] disconnected <7> [107.795994] [drm:status_store] [CONNECTOR:88:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [107.796001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] <7> [107.796016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:88:HDMI-A-1] <7> [107.796409] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.796615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [107.797016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.797226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.797234] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.797454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [107.799422] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.799431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [107.799624] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] disconnected <7> [107.799688] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] <7> [107.799709] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:88:HDMI-A-1] <7> [107.800133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.800368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [107.800780] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.800989] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.800993] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.801147] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [107.803112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.803120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [107.803332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] disconnected <7> [107.803516] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:88:HDMI-A-1] EDID override reset <7> [107.803548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] <7> [107.803570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:88:HDMI-A-1] <7> [107.803961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.804110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [107.804461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.804646] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.804652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.804851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [107.806785] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.806792] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [107.806977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] disconnected <7> [107.807155] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:94:DP-2] EDID override reset <7> [107.807186] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:DP-2] <7> [107.807207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:94:DP-2] <7> [107.807507] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:94:DP-2] disconnected <7> [107.807751] [drm:status_store] [CONNECTOR:100:HDMI-A-2] force updated from 0 to 0 or reprobing <7> [107.807760] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] <7> [107.807782] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2] <7> [107.808220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.808484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [107.808889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.809074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.809081] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.809273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [107.811468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.811477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [107.811667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected <7> [107.811732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] <7> [107.811755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2] <7> [107.812120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.812269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [107.812590] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.812739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.812743] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.812875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [107.814601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.814616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [107.814772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected <7> [107.814885] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:100:HDMI-A-2] EDID override reset <7> [107.814907] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] <7> [107.814922] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2] <7> [107.815239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.815441] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [107.815836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.815983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.815987] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.816107] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [107.817729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.817734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [107.817856] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected <6> [107.818486] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [107.818595] [drm:status_store] [CONNECTOR:76:VGA-1] force updated from 0 to 0 or reprobing <7> [107.818602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] <7> [107.818618] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:76:VGA-1] force=1 <7> [107.818769] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [107.818917] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [107.819287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.819579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [107.819983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [107.820194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.820201] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.820411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [107.822412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [107.822422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [107.822703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:76:VGA-1] probed modes : <7> [107.822726] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [107.822735] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [107.822743] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [107.822750] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [107.822758] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [107.822838] [drm:status_store] [CONNECTOR:88:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [107.822846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] <7> [107.822871] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:88:HDMI-A-1] <7> [107.823348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.823557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [107.823950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [107.824140] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.824147] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.824370] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [107.826367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [107.826377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [107.826568] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:88:HDMI-A-1] disconnected <7> [107.826659] [drm:status_store] [CONNECTOR:100:HDMI-A-2] force updated from 0 to 0 or reprobing <7> [107.826667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] <7> [107.826690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:100:HDMI-A-2] <7> [107.827119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.827371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [107.827789] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [107.827978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.827985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [107.828170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [107.830115] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [107.830123] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [107.830357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:100:HDMI-A-2] disconnected <7> [107.830711] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <6> [107.859170] Console: switching to colour frame buffer device 128x48

Created at 2023-07-30 22:41:06