igt@core_hotunplug@unbind-rebind on bat-adlm-1@linus-v6.5-rc4 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g3adb0b19c (x86_64) (Linux: 6.5.0-rc4-linus-v6.5-rc4-g5d0c230f1de8+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: unbind-rebind Opened device: /dev/dri/renderD128 Unloaded audio driver snd_hda_intel Realoading snd_hda_intel Subtest unbind-rebind: SUCCESS (1.895s)
Err	Starting subtest: unbind-rebind Subtest unbind-rebind: SUCCESS (1.895s)
Dmesg	<6> [114.893455] Console: switching to colour dummy device 80x25 <6> [114.893542] [IGT] core_hotunplug: executing <7> [114.896444] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [114.896981] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c] <7> [114.897195] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [114.898051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [114.902140] [IGT] core_hotunplug: closing selected device instance <7> [114.902521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [114.902863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [114.903072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.903245] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [114.903405] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.903561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [114.903740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [114.903893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [114.904185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6> [114.904916] [IGT] core_hotunplug: starting subtest unbind-rebind <7> [114.912765] [IGT] core_hotunplug: reopening DRM device for health check <7> [114.912801] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [114.913216] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [114.917122] [IGT] core_hotunplug: running device sysfs healthcheck <7> [114.917217] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [114.917455] [IGT] core_hotunplug: closing health checked device instance <7> [114.917989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [114.918324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [114.918514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.918687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [114.918852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.919026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [114.919199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [114.919356] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [114.919508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [114.920154] [IGT] core_hotunplug: reopening render device for health check <7> [114.920189] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [114.920590] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [114.924183] [IGT] core_hotunplug: running device sysfs healthcheck <7> [114.924366] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [114.924633] [IGT] core_hotunplug: closing health checked device instance <7> [114.925019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [114.925359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [114.925554] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.925726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [114.925892] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.926686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [114.926864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [114.927027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [114.927178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [114.984769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [114.985231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [114.985434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.985604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [114.985765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [114.985926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [114.986090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [114.986299] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [114.999748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [114.999935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [115.000113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [115.000258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [115.030732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [115.031438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [115.032102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.032503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [115.032871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.033236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [115.033548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [115.033852] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [115.047149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [115.047317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [115.047476] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [115.047623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [115.103937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [115.104363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [115.104552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.104706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [115.104853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.105018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [115.105152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [115.105345] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [115.122384] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [115.122548] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [115.122682] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [115.122814] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7> [115.122945] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [115.123105] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [115.123237] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [115.123368] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [115.123499] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [115.123625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [115.123749] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [115.123880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [115.124026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [115.124155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [115.124281] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [115.124409] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [115.124536] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [115.124661] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [115.124785] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [115.124909] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7> [115.125051] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [115.125181] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [115.125307] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [115.125436] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7> [115.125564] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [115.125691] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [115.125817] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [115.125946] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7> [115.126095] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [115.126227] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [115.126354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [115.126480] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7> [115.126606] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [115.126735] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [115.126861] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [115.126997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7> [115.127847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [115.128022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [115.128178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [115.128305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [115.195192] [IGT] core_hotunplug: unbinding the driver from the device <7> [115.195464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [115.196496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [115.197276] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.197741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [115.198221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.198670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [115.199074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [115.199488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [115.199987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [115.200348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [115.200653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [115.227711] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [115.307163] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <7> [115.309108] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind <7> [115.439171] [IGT] core_hotunplug: rebinding the driver to the device <7> [115.440284] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [115.440550] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7> [115.440724] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH <7> [115.440840] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [115.441118] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz <7> [115.441200] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7> [115.441277] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [115.441650] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [115.441734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [115.441814] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [115.441893] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [115.441921] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [115.442226] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [115.442241] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087 <7> [115.442354] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [115.442762] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018 <7> [115.442892] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [115.443019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [115.443122] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [115.443226] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [115.443341] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [115.443455] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4 <7> [115.443524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [115.443589] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76 <7> [115.443714] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148 <7> [115.443836] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [115.443977] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160 <7> [115.444103] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32 <7> [115.444219] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39 <7> [115.444333] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48 <7> [115.444445] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956 peakbw: 38416 <7> [115.444557] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981 peakbw: 76816 <7> [115.444668] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772 peakbw: 83216 <7> [115.444783] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772 peakbw: 83216 <7> [115.444900] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133 <7> [115.445023] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600 <7> [115.445137] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200 <7> [115.445263] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855 peakbw: 38416 <7> [115.445379] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500 peakbw: 76816 <7> [115.445495] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108 peakbw: 83216 <7> [115.445606] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108 peakbw: 83216 <7> [115.445717] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133 <7> [115.445829] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600 <7> [115.445943] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200 <7> [115.446087] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544 peakbw: 38416 <7> [115.446205] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [115.446321] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.446435] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.446547] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133 <7> [115.446660] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600 <7> [115.446806] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200 <7> [115.446928] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900 peakbw: 38416 <7> [115.447066] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [115.447176] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.447290] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.447403] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133 <7> [115.447516] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600 <7> [115.447627] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200 <7> [115.447737] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248 peakbw: 38416 <7> [115.447851] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [115.447971] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.448092] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.448255] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133 <7> [115.448381] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600 <7> [115.448496] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200 <7> [115.448622] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972 peakbw: 38416 <7> [115.448739] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816 <7> [115.448870] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.448995] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216 <7> [115.449107] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133 <7> [115.449221] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600 <7> [115.449336] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200 <7> [115.450426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [115.450623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251 <7> [115.450804] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7> [115.450994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7> [115.451162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [115.451326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [115.451494] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7> [115.451656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [115.451812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [115.451995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [115.452158] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7> [115.452318] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [115.452479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7> [115.452639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [115.452798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [115.452961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [115.453117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [115.453270] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39 <7> [115.453425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [115.453585] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [115.453743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [115.453899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [115.454065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [115.454220] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [115.454375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [115.454529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [115.454683] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [115.454836] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [115.454996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [115.455151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [115.455304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [115.455458] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [115.455648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [115.455905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.456100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [115.456278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.456451] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [115.456611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [115.456798] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [115.456978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [115.457232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [115.457396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [115.457561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [115.457763] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.457945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [115.458130] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [115.458303] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [115.458460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [115.458635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7> [115.458802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7> [115.458978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7> [115.459142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7> [115.459412] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin <7> [115.461079] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [115.462173] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us <7> [115.462358] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [115.462524] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec) <7> [115.462687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec) <7> [115.462844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec) <7> [115.463017] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec) <7> [115.463179] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec) <6> [115.465171] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20) <7> [115.466597] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7> [115.470188] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [115.470417] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind <6> [115.470602] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915]) <7> [115.470747] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7> [115.470926] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7> [115.471160] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7> [115.471334] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7> [115.471537] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [115.471710] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [115.471879] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [115.472082] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [115.472251] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [115.472414] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [115.472579] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [115.472741] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [115.472900] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [115.473103] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7> [115.473527] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [115.473677] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [115.473819] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [115.473968] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [115.474111] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [115.474406] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [115.474718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [115.475320] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7> [115.475506] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [115.475778] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [115.475960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [115.476216] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [115.476388] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [115.707963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.736962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.765960] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.794960] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.823963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.852961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.881961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.910962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.939964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.968963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [115.997962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.026964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.055965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.084963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.113964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.142964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.171966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.200965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.229964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.258964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.287966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.316964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.345966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.374965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.403965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.432967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.461966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.490966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.519965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.548967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.577967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.606966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [116.607170] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [116.607213] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [116.607283] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7> [116.607571] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [116.607759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [116.608269] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT) <7> [116.608485] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B] <7> [116.609263] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B] <7> [116.609527] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [116.609995] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT) <7> [116.610772] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [116.611154] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1] <7> [116.611738] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT) <7> [116.612258] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7> [116.612593] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2] <7> [116.613153] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port F is not present <7> [116.613424] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port G is not present <7> [116.614287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [116.614751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [116.615298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7> [116.615660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7> [116.615863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [116.616112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [116.616368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [116.616572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [116.616773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [116.616994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [116.617179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [116.617366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [116.617554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [116.617745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [116.618088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [116.618406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [116.618687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7> [116.618985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7> [116.619253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7> [116.619512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7> [116.619768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7> [116.620040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7> [116.620297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7> [116.620551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7> [116.620802] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7> [116.621098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7> [116.621353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7> [116.621604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7> [116.621862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A <7> [116.622119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A <7> [116.622358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B <7> [116.622596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C <7> [116.622833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D <7> [116.623160] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7> [116.623425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [116.623668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A <7> [116.623906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B <7> [116.624157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C <7> [116.624465] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D <7> [116.624722] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7> [116.624906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [116.625130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A <7> [116.625368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B <7> [116.625580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C <7> [116.625786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D <7> [116.626007] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [116.626224] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [116.626420] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0 <7> [116.626614] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [116.626859] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [116.627105] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [116.627319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [116.627677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled <7> [116.627885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled <7> [116.628115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled <7> [116.628315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled <7> [116.628521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [116.628770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [116.628965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [116.629273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [116.629576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [116.629844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [116.630122] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [116.630417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [116.630675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [116.630927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [116.631190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [116.631805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [116.632045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [116.632230] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [116.632430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7> [116.632610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7> [116.632790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7> [116.632992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7> [116.633329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7> [116.633634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7> [116.633902] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [116.634229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7> [116.634497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7> [116.634749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7> [116.635016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7> [116.635292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7> [116.635526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7> [116.635749] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7> [116.636621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [116.636822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [116.637038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7> [116.637234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7> [116.637432] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [116.637607] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [116.637780] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [116.637968] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [116.647897] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K) <7> [116.648116] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [116.648261] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [116.648412] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [116.648430] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7> [116.649510] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0 <7> [116.649688] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [116.649862] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [116.651015] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [116.651202] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [116.651376] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [116.652083] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [116.652260] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [116.652771] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7> [116.652943] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2 <7> [116.653465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [116.653636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [116.654941] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [116.655191] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 12 ext-regs. <7> [116.655434] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset <7> [116.685419] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f <7> [116.685616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000 <7> [116.685803] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7> [116.686007] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [116.686189] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8 <7> [116.686366] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c <7> [116.686546] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [116.686731] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [116.686913] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [116.687116] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [116.687295] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [116.687469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [116.687645] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [116.687830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [116.688025] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [116.690064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1 <6> [116.690071] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3 <7> [116.710092] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 18ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [116.711073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [116.712733] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads <6> [116.714309] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6> [116.714314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6> [116.715094] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7> [116.723673] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [116.723872] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [116.724085] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7> [116.724261] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7> [116.724428] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [116.724629] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [116.725432] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [116.725569] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [116.725700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [116.725824] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7> [116.725947] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [116.731068] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [116.732272] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event <7> [116.732729] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event <7> [116.733216] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7> [116.734063] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event <7> [116.734475] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3 <7> [116.735508] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event <6> [116.735568] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [116.738159] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [116.752661] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [116.757515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [116.759864] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [116.760145] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448 <7> [116.760816] [drm:drm_client_modeset_probe] <7> [116.760774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A <7> [116.760903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [116.760944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [116.761346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7> [116.761529] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [116.761729] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12 <7> [116.761734] i915 device info: graphics version: 12 <7> [116.761737] i915 device info: media version: 12 <7> [116.761739] i915 device info: display version: 13 <7> [116.761742] i915 device info: graphics stepping: C0 <7> [116.761744] i915 device info: media stepping: C0 <7> [116.761746] i915 device info: display stepping: D0 <7> [116.761749] i915 device info: base die stepping: ** <7> [116.761751] i915 device info: gt: 0 <7> [116.761753] i915 device info: memory-regions: 0x21 <7> [116.761756] i915 device info: page-sizes: 0x211000 <7> [116.761758] i915 device info: platform: ALDERLAKE_P <7> [116.761761] i915 device info: ppgtt-size: 48 <7> [116.761763] i915 device info: ppgtt-type: 2 <7> [116.761765] i915 device info: dma_mask_size: 39 <7> [116.761767] i915 device info: is_mobile: no <7> [116.761770] i915 device info: is_lp: no <7> [116.761772] i915 device info: require_force_probe: no <7> [116.761774] i915 device info: is_dgfx: no <7> [116.761777] i915 device info: has_64bit_reloc: yes <7> [116.761779] i915 device info: has_64k_pages: no <7> [116.761781] i915 device info: gpu_reset_clobbers_display: no <7> [116.761783] i915 device info: has_reset_engine: yes <7> [116.761786] i915 device info: has_3d_pipeline: yes <7> [116.761788] i915 device info: has_4tile: no <7> [116.761790] i915 device info: has_flat_ccs: no <7> [116.761793] i915 device info: has_global_mocs: yes <7> [116.761795] i915 device info: has_gmd_id: no <7> [116.761797] i915 device info: has_gt_uc: yes <7> [116.761800] i915 device info: has_heci_pxp: no <7> [116.761802] i915 device info: has_heci_gscfi: no <7> [116.761804] i915 device info: has_guc_deprivilege: no <7> [116.761806] i915 device info: has_l3_ccs_read: no <7> [116.761809] i915 device info: has_l3_dpf: no <7> [116.761811] i915 device info: has_llc: yes <7> [116.761813] i915 device info: has_logical_ring_contexts: yes <7> [116.761816] i915 device info: has_logical_ring_elsq: yes <7> [116.761818] i915 device info: has_media_ratio_mode: no <7> [116.761820] i915 device info: has_mslice_steering: no <7> [116.761823] i915 device info: has_oa_bpc_reporting: no <7> [116.761685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7> [116.761826] i915 device info: has_oa_slice_contrib_limits: no <7> [116.761828] i915 device info: has_oam: no <7> [116.761830] i915 device info: has_one_eu_per_fuse_bit: no <7> [116.761831] i915 device info: has_pxp: yes <7> [116.761833] i915 device info: has_rc6: yes <7> [116.761835] i915 device info: has_rc6p: no <7> [116.761837] i915 device info: has_rps: yes <7> [116.761839] i915 device info: has_runtime_pm: yes <7> [116.761841] i915 device info: has_snoop: no <7> [116.761842] i915 device info: has_coherent_ggtt: no <7> [116.761844] i915 device info: tuning_thread_rr_after_dep: no <7> [116.761846] i915 device info: unfenced_needs_alignment: no <7> [116.761848] i915 device info: hws_needs_physical: no <7> [116.761850] i915 device info: has_pooled_eu: no <7> [116.761852] i915 device info: cursor_needs_physical: no <7> [116.761853] i915 device info: has_cdclk_crawl: yes <7> [116.761855] i915 device info: has_cdclk_squash: no <7> [116.761857] i915 device info: has_ddi: yes <7> [116.761859] i915 device info: has_dp_mst: yes <7> [116.761861] i915 device info: has_dsb: yes <7> [116.761863] i915 device info: has_fpga_dbg: yes <7> [116.761865] i915 device info: has_gmch: no <7> [116.761866] i915 device info: has_hotplug: yes <7> [116.761868] i915 device info: has_hti: no <7> [116.761870] i915 device info: has_ipc: yes <7> [116.761872] i915 device info: has_overlay: no <7> [116.761874] i915 device info: has_psr: yes <7> [116.761875] i915 device info: has_psr_hw_tracking: no <7> [116.761877] i915 device info: overlay_needs_physical: no <7> [116.761879] i915 device info: supports_tv: no <7> [116.761881] i915 device info: has_hdcp: yes <7> [116.761883] i915 device info: has_dmc: yes <7> [116.761885] i915 device info: has_dsc: yes <7> [116.761886] i915 device info: rawclk rate: 19200 kHz <7> [116.761889] i915 device info: iommu: enabled <7> [116.761891] i915 device info: available engines: 41403 <7> [116.761893] i915 device info: slice total: 1, mask=0001 <7> [116.761896] i915 device info: subslice total: 6 <7> [116.761898] i915 device info: slice0: 6 subslices, mask=0000003f <7> [116.761901] i915 device info: EU total: 96 <7> [116.761903] i915 device info: EU per subslice: 16 <7> [116.761904] i915 device info: has slice power gating: yes <7> [116.761907] i915 device info: has subslice power gating: no <7> [116.761909] i915 device info: has EU power gating: no <6> [116.761911] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [116.761913] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [116.761915] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [116.762052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7> [116.762357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [116.762634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [116.762915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [116.763202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [116.763801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [116.764506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected <7> [116.764555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [116.764705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [116.764739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [116.765243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [116.765866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [116.766227] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected <7> [116.766270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [116.766309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [116.766338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [116.766611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [116.767430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [116.767732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected <7> [116.767773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [116.767811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [116.767838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [116.768122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [116.768667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [116.768983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected <7> [116.769038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [116.769065] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [116.769073] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [116.769080] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [116.769086] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [116.769092] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [116.769165] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [116.769184] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [116.769216] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [116.769251] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [116.770141] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <7> [116.770242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [116.770526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [116.770981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [116.771545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [116.771856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [116.772198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [116.772491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [116.772818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [116.773136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [116.773415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [116.774031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [116.774877] [drm:drm_client_modeset_probe] <7> [116.774943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <6> [116.774906] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [116.774998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [116.775352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [116.775628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [116.776315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [116.776887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [116.777222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [116.777524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [116.777805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [116.778178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [116.778427] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [116.778460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [116.778475] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7> [116.778488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [116.778838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [116.778866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [116.778893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [116.779358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [116.779386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [116.779413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [116.779744] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [116.779770] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [116.779777] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [116.779783] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [116.779788] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [116.779793] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [116.779845] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [116.779864] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [116.779893] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [116.779926] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [116.780043] [drm:drm_client_modeset_probe] <7> [116.780098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] <7> [116.780126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1] <7> [116.780444] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected <7> [116.780471] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] <7> [116.780497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1] <7> [116.780813] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected <7> [116.780839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] <7> [116.780865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2] <7> [116.781213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected <7> [116.781241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] <7> [116.781266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3] <7> [116.781592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected <7> [116.781617] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [116.781623] [drm:drm_client_modeset_probe] connector 236 enabled? no <7> [116.781629] [drm:drm_client_modeset_probe] connector 249 enabled? no <7> [116.781634] [drm:drm_client_modeset_probe] connector 255 enabled? no <7> [116.781639] [drm:drm_client_modeset_probe] connector 264 enabled? no <7> [116.781690] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [116.781708] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [116.781735] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [116.781767] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [116.786490] [IGT] core_hotunplug: reopening DRM device for health check <7> [116.786546] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [116.787233] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [116.790614] [IGT] core_hotunplug: running device sysfs healthcheck <7> [116.790879] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [116.791626] [IGT] core_hotunplug: closing health checked device instance <7> [116.792890] [IGT] core_hotunplug: reopening render device for health check <7> [116.792987] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [116.793845] [IGT] core_hotunplug: running i915 GPU healthcheck <7> [116.798567] [IGT] core_hotunplug: running device sysfs healthcheck <7> [116.799070] [IGT] core_hotunplug: running i915 device perf healthcheck <7> [116.799714] [IGT] core_hotunplug: closing health checked device instance <6> [116.799949] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS <6> [116.801076] [IGT] core_hotunplug: exiting, ret=0

<6> [114.893455] Console: switching to colour dummy device 80x25

<6> [114.893542] [IGT] core_hotunplug: executing

<7> [114.896444] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [114.896981] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x0000005c [0x0000005c]

<7> [114.897195] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [114.898051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [114.902140] [IGT] core_hotunplug: closing selected device instance

<7> [114.902521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [114.902863] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [114.903072] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.903245] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [114.903405] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.903561] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [114.903740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [114.903893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [114.904185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<6> [114.904916] [IGT] core_hotunplug: starting subtest unbind-rebind

<7> [114.912765] [IGT] core_hotunplug: reopening DRM device for health check

<7> [114.912801] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [114.913216] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [114.917122] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [114.917217] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [114.917455] [IGT] core_hotunplug: closing health checked device instance

<7> [114.917989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [114.918324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [114.918514] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.918687] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [114.918852] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.919026] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [114.919199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [114.919356] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [114.919508] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [114.920154] [IGT] core_hotunplug: reopening render device for health check

<7> [114.920189] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [114.920590] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [114.924183] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [114.924366] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [114.924633] [IGT] core_hotunplug: closing health checked device instance

<7> [114.925019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [114.925359] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [114.925554] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.925726] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [114.925892] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.926686] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [114.926864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [114.927027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [114.927178] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [114.984769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [114.985231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [114.985434] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.985604] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [114.985765] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [114.985926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [114.986090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [114.986299] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [114.999748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [114.999935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [115.000113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [115.000258] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [115.030732] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [115.031438] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [115.032102] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.032503] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [115.032871] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.033236] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [115.033548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [115.033852] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [115.047149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [115.047317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [115.047476] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [115.047623] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [115.103937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [115.104363] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [115.104552] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.104706] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [115.104853] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.105018] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [115.105152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [115.105345] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [115.122384] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [115.122548] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [115.122682] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [115.122814] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A

<7> [115.122945] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [115.123105] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [115.123237] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [115.123368] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [115.123499] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [115.123625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [115.123749] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [115.123880] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [115.124026] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [115.124155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [115.124281] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [115.124409] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [115.124536] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [115.124661] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [115.124785] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [115.124909] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E

<7> [115.125051] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [115.125181] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [115.125307] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [115.125436] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F

<7> [115.125564] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [115.125691] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [115.125817] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [115.125946] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G

<7> [115.126095] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [115.126227] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [115.126354] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [115.126480] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H

<7> [115.126606] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [115.126735] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [115.126861] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [115.126997] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I

<7> [115.127847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [115.128022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [115.128178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [115.128305] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [115.195192] [IGT] core_hotunplug: unbinding the driver from the device

<7> [115.195464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [115.196496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [115.197276] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.197741] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [115.198221] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.198670] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [115.199074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [115.199488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [115.199987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [115.200348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [115.200653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [115.227711] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [115.307163] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<7> [115.309108] i915 0000:00:02.0: [drm:i915_hdcp_component_unbind [i915]] I915 HDCP comp unbind

<7> [115.439171] [IGT] core_hotunplug: rebinding the driver to the device

<7> [115.440284] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [115.440550] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes)

<7> [115.440724] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Alder Lake PCH

<7> [115.440840] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [115.441118] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 19200 kHz

<7> [115.441200] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005

<7> [115.441277] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [115.441650] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [115.441734] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [115.441814] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [115.441893] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [115.441921] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [115.442226] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [115.442241] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000050200087

<7> [115.442354] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [115.442762] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x44a07018

<7> [115.442892] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [115.443019] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [115.443122] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [115.443226] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [115.443341] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [115.443455] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 4

<7> [115.443524] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [115.443589] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2401 tRP=24 tRDPRE=20 tRAS=52 tRCD=24 tRC=76

<7> [115.443714] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=4801 tRP=44 tRDPRE=28 tRAS=104 tRCD=44 tRC=148

<7> [115.443836] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [115.443977] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 3: DCLK=5201 tRP=48 tRDPRE=28 tRAS=112 tRCD=48 tRC=160

<7> [115.444103] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 0: CLK=32

<7> [115.444219] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 1: CLK=39

<7> [115.444333] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] PSF GV 2: CLK=48

<7> [115.444445] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=16956 peakbw: 38416

<7> [115.444557] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=23981 peakbw: 76816

<7> [115.444668] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=24772 peakbw: 83216

<7> [115.444783] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 3: num_planes=0 deratedbw=24772 peakbw: 83216

<7> [115.444900] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 0: num_planes=0 bw=34133

<7> [115.445023] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 1: num_planes=0 bw=41600

<7> [115.445137] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / PSF GV 2: num_planes=0 bw=51200

<7> [115.445263] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=21855 peakbw: 38416

<7> [115.445379] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=4 deratedbw=34500 peakbw: 76816

<7> [115.445495] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=4 deratedbw=36108 peakbw: 83216

<7> [115.445606] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 3: num_planes=4 deratedbw=36108 peakbw: 83216

<7> [115.445717] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 0: num_planes=4 bw=34133

<7> [115.445829] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 1: num_planes=4 bw=41600

<7> [115.445943] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / PSF GV 2: num_planes=4 bw=51200

<7> [115.446087] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=25544 peakbw: 38416

<7> [115.446205] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [115.446321] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.446435] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.446547] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 0: num_planes=0 bw=34133

<7> [115.446660] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 1: num_planes=0 bw=41600

<7> [115.446806] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / PSF GV 2: num_planes=0 bw=51200

<7> [115.446928] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=27900 peakbw: 38416

<7> [115.447066] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [115.447176] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.447290] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.447403] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 0: num_planes=0 bw=34133

<7> [115.447516] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 1: num_planes=0 bw=41600

<7> [115.447627] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / PSF GV 2: num_planes=0 bw=51200

<7> [115.447737] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=29248 peakbw: 38416

<7> [115.447851] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [115.447971] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.448092] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.448255] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 0: num_planes=0 bw=34133

<7> [115.448381] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 1: num_planes=0 bw=41600

<7> [115.448496] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / PSF GV 2: num_planes=0 bw=51200

<7> [115.448622] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=29972 peakbw: 38416

<7> [115.448739] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76816

<7> [115.448870] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.448995] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 83216

<7> [115.449107] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 0: num_planes=0 bw=34133

<7> [115.449221] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 1: num_planes=0 bw=41600

<7> [115.449336] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / PSF GV 2: num_planes=0 bw=51200

<7> [115.450426] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [115.450623] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 251

<7> [115.450804] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7)

<7> [115.450994] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5)

<7> [115.451162] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [115.451326] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [115.451494] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812)

<7> [115.451656] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [115.451812] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [115.451995] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [115.452158] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366)

<7> [115.452318] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [115.452479] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78)

<7> [115.452639] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [115.452798] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [115.452961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [115.453117] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [115.453270] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 251 not known; assuming 39

<7> [115.453425] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [115.453585] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [115.453743] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [115.453899] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [115.454065] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [115.454220] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [115.454375] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [115.454529] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [115.454683] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [115.454836] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [115.454996] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [115.455151] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [115.455304] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [115.455458] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [115.455648] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [115.455905] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.456100] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [115.456278] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.456451] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [115.456611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [115.456798] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [115.456978] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [115.457232] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [115.457396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [115.457561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [115.457763] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.457945] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [115.458130] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [115.458303] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [115.458460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [115.458635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A

<7> [115.458802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B

<7> [115.458978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C

<7> [115.459142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D

<7> [115.459412] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/adlp_dmc.bin

<7> [115.461079] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [115.462173] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 35 us

<7> [115.462358] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [115.462524] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 54 (54.0 usec)

<7> [115.462687] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 83 (83.0 usec)

<7> [115.462844] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 106 (106.0 usec)

<7> [115.463017] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 168 (168.0 usec)

<7> [115.463179] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 168 (168.0 usec)

<6> [115.465171] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/adlp_dmc.bin (v2.20)

<7> [115.466597] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available.

<7> [115.470188] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 179200 kHz, VCO 537600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [115.470417] i915 0000:00:02.0: [drm:i915_hdcp_component_bind [i915]] I915 HDCP comp bind

<6> [115.470602] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])

<7> [115.470747] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz

<7> [115.470926] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz

<7> [115.471160] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT)

<7> [115.471334] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A]

<7> [115.471537] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [115.471710] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [115.471879] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [115.472082] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [115.472251] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [115.472414] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [115.472579] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [115.472741] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [115.472900] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [115.473103] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0

<7> [115.473527] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [115.473677] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [115.473819] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [115.473968] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [115.474111] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [115.474406] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [115.474718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [115.475320] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on

<7> [115.475506] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [115.475778] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [115.475960] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [115.476216] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [115.476388] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [115.707963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.736962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.765960] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.794960] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.823963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.852961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.881961] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.910962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.939964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.968963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [115.997962] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.026964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.055965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.084963] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.113964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.142964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.171966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.200965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.229964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.258964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.287966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.316964] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.345966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.374965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.403965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.432967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.461966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.490966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.519965] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.548967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.577967] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.606966] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [116.607170] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [116.607213] i915 0000:00:02.0: [drm] [ENCODER:235:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [116.607283] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off

<7> [116.607571] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [116.607759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [116.608269] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI B/PHY B] using AUX B (VBT)

<7> [116.608485] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:235:DDI B/PHY B]

<7> [116.609263] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:235:DDI B/PHY B]

<7> [116.609527] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:235:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [116.609995] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:254:DDI TC1/PHY TC1] using AUX D (VBT)

<7> [116.610772] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [116.611154] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:254:DDI TC1/PHY TC1]

<7> [116.611738] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:263:DDI TC2/PHY TC2] using AUX E (VBT)

<7> [116.612258] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected)

<7> [116.612593] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:263:DDI TC2/PHY TC2]

<7> [116.613153] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port F is not present

<7> [116.613424] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port G is not present

<7> [116.614287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [116.614751] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [116.615298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled

<7> [116.615660] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled

<7> [116.615863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [116.616112] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [116.616368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [116.616572] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [116.616773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [116.616994] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [116.617179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [116.617366] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [116.617554] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [116.617745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [116.618088] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [116.618406] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [116.618687] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C

<7> [116.618985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C

<7> [116.619253] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C

<7> [116.619512] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C

<7> [116.619768] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C

<7> [116.620040] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C

<7> [116.620297] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D

<7> [116.620551] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D

<7> [116.620802] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D

<7> [116.621098] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D

<7> [116.621353] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D

<7> [116.621604] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D

<7> [116.621862] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [116.622119] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:237:DP-MST A] hw state readout: disabled, pipe A

<7> [116.622358] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:238:DP-MST B] hw state readout: disabled, pipe B

<7> [116.622596] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:239:DP-MST C] hw state readout: disabled, pipe C

<7> [116.622833] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:240:DP-MST D] hw state readout: disabled, pipe D

<7> [116.623160] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected)

<7> [116.623425] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:254:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [116.623668] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:256:DP-MST A] hw state readout: disabled, pipe A

<7> [116.623906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:257:DP-MST B] hw state readout: disabled, pipe B

<7> [116.624157] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:258:DP-MST C] hw state readout: disabled, pipe C

<7> [116.624465] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:259:DP-MST D] hw state readout: disabled, pipe D

<7> [116.624722] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected)

<7> [116.624906] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:263:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [116.625130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST A] hw state readout: disabled, pipe A

<7> [116.625368] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST B] hw state readout: disabled, pipe B

<7> [116.625580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST C] hw state readout: disabled, pipe C

<7> [116.625786] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:268:DP-MST D] hw state readout: disabled, pipe D

<7> [116.626007] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [116.626224] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [116.626420] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TBT PLL hw state readout: pipe_mask 0x0, on 0

<7> [116.626614] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [116.626859] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [116.627105] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [116.627319] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [116.627677] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:DP-1] hw state readout: disabled

<7> [116.627885] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:249:HDMI-A-1] hw state readout: disabled

<7> [116.628115] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:255:DP-2] hw state readout: disabled

<7> [116.628315] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:264:DP-3] hw state readout: disabled

<7> [116.628521] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [116.628770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [116.628965] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [116.629273] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [116.629576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [116.629844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [116.630122] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [116.630417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [116.630675] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [116.630927] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [116.631190] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [116.631805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [116.632045] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [116.632230] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [116.632430] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz

<7> [116.632610] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz

<7> [116.632790] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz

<7> [116.632992] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz

<7> [116.633329] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz

<7> [116.633634] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz

<7> [116.633902] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [116.634229] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz

<7> [116.634497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz

<7> [116.634749] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz

<7> [116.635016] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz

<7> [116.635292] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz

<7> [116.635526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz

<7> [116.635749] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0

<7> [116.636621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [116.636822] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [116.637038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state]

<7> [116.637234] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state]

<7> [116.637432] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [116.637607] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [116.637780] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [116.637968] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [116.647897] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [592K, 1420K)

<7> [116.648116] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [116.648261] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [116.648412] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [116.648430] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global

<7> [116.649510] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0

<7> [116.649688] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [116.649862] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [116.651015] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [116.651202] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [116.651376] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [116.652083] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [116.652260] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [116.652771] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2

<7> [116.652943] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'2

<7> [116.653465] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [116.653636] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [116.654941] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [116.655191] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 12 ext-regs.

<7> [116.655434] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 8 KB for temporary ADS regset

<7> [116.685419] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0x16304f

<7> [116.685616] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x44000

<7> [116.685803] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4

<7> [116.686007] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [116.686189] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0xac8

<7> [116.686366] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x46aa000c

<7> [116.686546] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [116.686731] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [116.686913] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [116.687116] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [116.687295] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [116.687469] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [116.687645] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [116.687830] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [116.688025] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [116.690064] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/adlp_guc_70.bin version 70.5.1

<6> [116.690071] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3

<7> [116.710092] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 18ms, freq = 850MHz, before = 850MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [116.711073] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [116.712733] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads

<6> [116.714309] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled

<6> [116.714314] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled

<6> [116.715094] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled

<7> [116.723673] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [116.723872] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [116.724085] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping

<7> [116.724261] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping

<7> [116.724428] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [116.724629] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [116.725432] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [116.725569] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [116.725700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [116.725824] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1

<7> [116.725947] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [116.731068] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [116.732272] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:DP-1] generating connector hotplug event

<7> [116.732729] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:249:HDMI-A-1] generating connector hotplug event

<7> [116.733216] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2

<7> [116.734063] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:255:DP-2] generating connector hotplug event

<7> [116.734475] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-3

<7> [116.735508] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:264:DP-3] generating connector hotplug event

<6> [116.735568] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [116.738159] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [116.752661] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [116.757515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [116.759864] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [116.760145] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=448

<7> [116.760816] [drm:drm_client_modeset_probe]

<7> [116.760774] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_A

<7> [116.760903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [116.760944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [116.761346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B

<7> [116.761529] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [116.761729] i915 device info: pciid=0x46aa rev=0x0c platform=ALDERLAKE_P (subplatform=0x0) gen=12

<7> [116.761734] i915 device info: graphics version: 12

<7> [116.761737] i915 device info: media version: 12

<7> [116.761739] i915 device info: display version: 13

<7> [116.761742] i915 device info: graphics stepping: C0

<7> [116.761744] i915 device info: media stepping: C0

<7> [116.761746] i915 device info: display stepping: D0

<7> [116.761749] i915 device info: base die stepping: **

<7> [116.761751] i915 device info: gt: 0

<7> [116.761753] i915 device info: memory-regions: 0x21

<7> [116.761756] i915 device info: page-sizes: 0x211000

<7> [116.761758] i915 device info: platform: ALDERLAKE_P

<7> [116.761761] i915 device info: ppgtt-size: 48

<7> [116.761763] i915 device info: ppgtt-type: 2

<7> [116.761765] i915 device info: dma_mask_size: 39

<7> [116.761767] i915 device info: is_mobile: no

<7> [116.761770] i915 device info: is_lp: no

<7> [116.761772] i915 device info: require_force_probe: no

<7> [116.761774] i915 device info: is_dgfx: no

<7> [116.761777] i915 device info: has_64bit_reloc: yes

<7> [116.761779] i915 device info: has_64k_pages: no

<7> [116.761781] i915 device info: gpu_reset_clobbers_display: no

<7> [116.761783] i915 device info: has_reset_engine: yes

<7> [116.761786] i915 device info: has_3d_pipeline: yes

<7> [116.761788] i915 device info: has_4tile: no

<7> [116.761790] i915 device info: has_flat_ccs: no

<7> [116.761793] i915 device info: has_global_mocs: yes

<7> [116.761795] i915 device info: has_gmd_id: no

<7> [116.761797] i915 device info: has_gt_uc: yes

<7> [116.761800] i915 device info: has_heci_pxp: no

<7> [116.761802] i915 device info: has_heci_gscfi: no

<7> [116.761804] i915 device info: has_guc_deprivilege: no

<7> [116.761806] i915 device info: has_l3_ccs_read: no

<7> [116.761809] i915 device info: has_l3_dpf: no

<7> [116.761811] i915 device info: has_llc: yes

<7> [116.761813] i915 device info: has_logical_ring_contexts: yes

<7> [116.761816] i915 device info: has_logical_ring_elsq: yes

<7> [116.761818] i915 device info: has_media_ratio_mode: no

<7> [116.761820] i915 device info: has_mslice_steering: no

<7> [116.761823] i915 device info: has_oa_bpc_reporting: no

<7> [116.761685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C

<7> [116.761826] i915 device info: has_oa_slice_contrib_limits: no

<7> [116.761828] i915 device info: has_oam: no

<7> [116.761830] i915 device info: has_one_eu_per_fuse_bit: no

<7> [116.761831] i915 device info: has_pxp: yes

<7> [116.761833] i915 device info: has_rc6: yes

<7> [116.761835] i915 device info: has_rc6p: no

<7> [116.761837] i915 device info: has_rps: yes

<7> [116.761839] i915 device info: has_runtime_pm: yes

<7> [116.761841] i915 device info: has_snoop: no

<7> [116.761842] i915 device info: has_coherent_ggtt: no

<7> [116.761844] i915 device info: tuning_thread_rr_after_dep: no

<7> [116.761846] i915 device info: unfenced_needs_alignment: no

<7> [116.761848] i915 device info: hws_needs_physical: no

<7> [116.761850] i915 device info: has_pooled_eu: no

<7> [116.761852] i915 device info: cursor_needs_physical: no

<7> [116.761853] i915 device info: has_cdclk_crawl: yes

<7> [116.761855] i915 device info: has_cdclk_squash: no

<7> [116.761857] i915 device info: has_ddi: yes

<7> [116.761859] i915 device info: has_dp_mst: yes

<7> [116.761861] i915 device info: has_dsb: yes

<7> [116.761863] i915 device info: has_fpga_dbg: yes

<7> [116.761865] i915 device info: has_gmch: no

<7> [116.761866] i915 device info: has_hotplug: yes

<7> [116.761868] i915 device info: has_hti: no

<7> [116.761870] i915 device info: has_ipc: yes

<7> [116.761872] i915 device info: has_overlay: no

<7> [116.761874] i915 device info: has_psr: yes

<7> [116.761875] i915 device info: has_psr_hw_tracking: no

<7> [116.761877] i915 device info: overlay_needs_physical: no

<7> [116.761879] i915 device info: supports_tv: no

<7> [116.761881] i915 device info: has_hdcp: yes

<7> [116.761883] i915 device info: has_dmc: yes

<7> [116.761885] i915 device info: has_dsc: yes

<7> [116.761886] i915 device info: rawclk rate: 19200 kHz

<7> [116.761889] i915 device info: iommu: enabled

<7> [116.761891] i915 device info: available engines: 41403

<7> [116.761893] i915 device info: slice total: 1, mask=0001

<7> [116.761896] i915 device info: subslice total: 6

<7> [116.761898] i915 device info: slice0: 6 subslices, mask=0000003f

<7> [116.761901] i915 device info: EU total: 96

<7> [116.761903] i915 device info: EU per subslice: 16

<7> [116.761904] i915 device info: has slice power gating: yes

<7> [116.761907] i915 device info: has subslice power gating: no

<7> [116.761909] i915 device info: has EU power gating: no

<6> [116.761911] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [116.761913] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [116.761915] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [116.762052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D

<7> [116.762357] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [116.762634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [116.762915] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [116.763202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [116.763801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [116.764506] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] status updated from unknown to disconnected

<7> [116.764555] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [116.764705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [116.764739] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [116.765243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [116.765866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [116.766227] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] status updated from unknown to disconnected

<7> [116.766270] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [116.766309] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [116.766338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [116.766611] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [116.767430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [116.767732] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] status updated from unknown to disconnected

<7> [116.767773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [116.767811] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [116.767838] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [116.768122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [116.768667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [116.768983] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] status updated from unknown to disconnected

<7> [116.769038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [116.769065] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [116.769073] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [116.769080] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [116.769086] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [116.769092] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [116.769165] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [116.769184] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [116.769216] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [116.769251] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [116.770141] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100

<7> [116.770242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [116.770526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [116.770981] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [116.771545] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [116.771856] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [116.772198] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [116.772491] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [116.772818] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [116.773136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [116.773415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [116.774031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [116.774877] [drm:drm_client_modeset_probe]

<7> [116.774943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<6> [116.774906] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [116.774998] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [116.775352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [116.775628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [116.776315] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [116.776887] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [116.777222] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [116.777524] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [116.777805] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [116.778178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [116.778427] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [116.778460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [116.778475] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010

<7> [116.778488] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [116.778838] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [116.778866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [116.778893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [116.779358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [116.779386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [116.779413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [116.779744] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [116.779770] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [116.779777] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [116.779783] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [116.779788] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [116.779793] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [116.779845] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [116.779864] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [116.779893] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [116.779926] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [116.780043] [drm:drm_client_modeset_probe]

<7> [116.780098] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1]

<7> [116.780126] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:DP-1]

<7> [116.780444] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:DP-1] disconnected

<7> [116.780471] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1]

<7> [116.780497] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:249:HDMI-A-1]

<7> [116.780813] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:249:HDMI-A-1] disconnected

<7> [116.780839] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2]

<7> [116.780865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:255:DP-2]

<7> [116.781213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:255:DP-2] disconnected

<7> [116.781241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3]

<7> [116.781266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:264:DP-3]

<7> [116.781592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:264:DP-3] disconnected

<7> [116.781617] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [116.781623] [drm:drm_client_modeset_probe] connector 236 enabled? no

<7> [116.781629] [drm:drm_client_modeset_probe] connector 249 enabled? no

<7> [116.781634] [drm:drm_client_modeset_probe] connector 255 enabled? no

<7> [116.781639] [drm:drm_client_modeset_probe] connector 264 enabled? no

<7> [116.781690] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [116.781708] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [116.781735] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [116.781767] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [116.786490] [IGT] core_hotunplug: reopening DRM device for health check

<7> [116.786546] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [116.787233] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [116.790614] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [116.790879] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [116.791626] [IGT] core_hotunplug: closing health checked device instance

<7> [116.792890] [IGT] core_hotunplug: reopening render device for health check

<7> [116.792987] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [116.793845] [IGT] core_hotunplug: running i915 GPU healthcheck

<7> [116.798567] [IGT] core_hotunplug: running device sysfs healthcheck

<7> [116.799070] [IGT] core_hotunplug: running i915 device perf healthcheck

<7> [116.799714] [IGT] core_hotunplug: closing health checked device instance

<6> [116.799949] [IGT] core_hotunplug: finished subtest unbind-rebind, SUCCESS

<6> [116.801076] [IGT] core_hotunplug: exiting, ret=0

Results for igt@core_hotunplug@unbind-rebind