igt@i915_selftest@live@vma on shard-rkl@linus-v6.5-rc3 Test details

Detail	Value
Hostname	shard-rkl-6
Igt-Version	IGT-Version: 1.27.1-g354c536a4 (x86_64) (Linux: 6.5.0-rc3-linus-v6.5-rc3-g6eaae1980760+ x86_64)
Out	Starting dynamic subtest: vma Dynamic subtest vma: SUCCESS (1.653s)
Err	Starting dynamic subtest: vma Dynamic subtest vma: SUCCESS (1.653s)
Dmesg	<6> [104.145281] [IGT] i915_selftest: starting dynamic subtest vma <5> [104.213123] Setting dangerous option live_selftests - tainting kernel <7> [104.240368] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7> [104.240541] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [104.240707] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Tiger Lake LP PCH <7> [104.240838] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [104.241036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [104.241372] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001 <7> [104.241468] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <7> [104.241772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [104.241866] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [104.241949] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M <6> [104.242028] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [104.242032] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [104.242231] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [104.242243] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000000a0200087 <7> [104.242366] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K <7> [104.242618] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x93ab8018 <7> [104.242789] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0 <7> [104.242907] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [104.243017] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [104.243125] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [104.243252] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7> [104.243386] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [104.243480] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [104.243580] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74 <7> [104.243727] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=9219 peakbw: 51216 <7> [104.243857] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=13170 peakbw: 51216 <7> [104.243984] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=2 deratedbw=16761 peakbw: 51216 <7> [104.244108] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=19408 peakbw: 51216 <7> [104.244224] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=20000 peakbw: 51216 <7> [104.244335] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=20000 peakbw: 51216 <7> [104.244578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [104.244702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 243 <7> [104.244819] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7) <7> [104.244935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5) <7> [104.245050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7> [104.245165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [104.245280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812) <7> [104.245394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7> [104.245506] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7> [104.245644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [104.245773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366) <7> [104.245894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7> [104.246012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 78) <7> [104.246129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7> [104.246243] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7> [104.246354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [104.246465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [104.246575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7> [104.246696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [104.246810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [104.246923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [104.247035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [104.247145] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port D trying to use the same DDC pin (0x9) as port A, disabling port A DVI/HDMI support <7> [104.247268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [104.247391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [104.247508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [104.247622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7> [104.247747] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [104.247860] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7> [104.247969] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [104.248080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [104.248191] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7> [104.248332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [104.248513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.248662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [104.248797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.248930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [104.249064] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.249210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [104.249348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.249481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [104.249616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [104.249775] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [104.249905] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [104.250095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [104.250219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [104.250341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [104.250494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.250649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it. <7> [104.250791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.250926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it. <7> [104.251058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.251191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it. <7> [104.251319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage) <7> [104.251445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it. <7> [104.251555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3 <7> [104.251725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [104.251889] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/rkl_dmc_ver2_03.bin <7> [104.252919] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [104.253020] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_03.bin (v2.3) <7> [104.253339] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 22 us <7> [104.253482] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec) <7> [104.253613] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 25 (25.0 usec) <7> [104.253753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 25 (25.0 usec) <7> [104.253862] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 25 (25.0 usec) <7> [104.253967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec) <7> [104.254069] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 73 (73.0 usec) <7> [104.254169] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 123 (123.0 usec) <7> [104.254269] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 143 (143.0 usec) <7> [104.256230] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available. <7> [104.257878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0 <7> [104.258058] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 648000 kHz <7> [104.258191] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1296000 kHz <7> [104.258344] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT) <7> [104.258483] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A] <7> [104.258610] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [104.258759] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [104.258883] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7> [104.259007] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [104.259125] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [104.259240] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [104.259357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [104.259470] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [104.259581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [104.259734] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0 <7> [104.259915] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [104.260029] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [104.260132] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [104.260231] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [104.260327] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [104.260491] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [104.260685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7> [104.260907] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on <7> [104.261045] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [104.261210] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [104.261329] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [104.261480] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [104.261594] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [104.496640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.525639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.553640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.582640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.611638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.640638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.669639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.698639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.727639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.756639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.785639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.814639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.843639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.872639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.901640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.930639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.959639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [104.988639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.017639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.046639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.075639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.104639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.133639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.162639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.191639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.220639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.249639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.278639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.307639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.336639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.365638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.394638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [105.394814] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [105.394829] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [105.394883] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off <7> [105.395092] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [105.395244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7> [105.395484] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI B/PHY B] using AUX B (platform default) <7> [105.395674] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI B/PHY B] <7> [105.395825] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7> [105.396105] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:143:DDI TC1/PHY C] using AUX D (platform default) <7> [105.396217] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:143:DDI TC1/PHY C] <7> [105.396319] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:143:DDI TC1/PHY C] Using DDC pin 0x9 (VBT) <7> [105.396471] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:147:DDI TC2/PHY D] using AUX E (VBT) <7> [105.396591] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:147:DDI TC2/PHY D] <7> [105.396845] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:147:DDI TC2/PHY D] <7> [105.396950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:147:DDI TC2/PHY D] Using DDC pin 0xa (VBT) <7> [105.397277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled <7> [105.397432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7> [105.397555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [105.397685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7> [105.397797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7> [105.397903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7> [105.398009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7> [105.398114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7> [105.398219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7> [105.398323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7> [105.398426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7> [105.398528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7> [105.398640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7> [105.398742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7> [105.398846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI B/PHY B] hw state readout: disabled, pipe A <7> [105.398949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:143:DDI TC1/PHY C] hw state readout: disabled, pipe A <7> [105.399051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI TC2/PHY D] hw state readout: disabled, pipe A <7> [105.399149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:149:DP-MST A] hw state readout: disabled, pipe A <7> [105.399250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DP-MST B] hw state readout: disabled, pipe B <7> [105.399366] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [105.399497] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [105.399619] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [105.399769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:HDMI-A-1] hw state readout: disabled <7> [105.399887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:144:HDMI-A-2] hw state readout: disabled <7> [105.400000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:DP-1] hw state readout: disabled <7> [105.400111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:155:HDMI-A-3] hw state readout: disabled <7> [105.400222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [105.400330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7> [105.400433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7> [105.400533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7> [105.400641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7> [105.400742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7> [105.400839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [105.400973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7> [105.401099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7> [105.401213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7> [105.401323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7> [105.401428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7> [105.401530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7> [105.401652] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [105.401812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state] <7> [105.401943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7> [105.402065] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [105.402190] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [105.402350] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [105.402456] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [105.402557] MCR Steering: Default steering: group=0x0, instance=0x0 <7> [105.402567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global <7> [105.403285] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0 <7> [105.403411] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0 <7> [105.403523] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7> [105.404374] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7> [105.404500] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0 <7> [105.404613] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0 <7> [105.405028] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7> [105.405138] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0 <7> [105.405420] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7> [105.405526] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0 <7> [105.411814] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping <7> [105.411951] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7> [105.412070] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [105.412194] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [105.412673] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [105.412791] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [105.412880] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [105.412960] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [105.415798] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:HDMI-A-1] generating connector hotplug event <7> [105.416198] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:144:HDMI-A-2] generating connector hotplug event <7> [105.416621] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY D bus for card0-DP-1 <7> [105.417319] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:148:DP-1] generating connector hotplug event <7> [105.417716] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:155:HDMI-A-3] generating connector hotplug event <6> [105.417768] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [105.419025] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected <6> [105.430871] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [105.435271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input27 <7> [105.435989] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x9010) <7> [105.436378] [drm:drm_client_modeset_probe] <7> [105.436417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] <7> [105.436377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4 <7> [105.436435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1] <7> [105.436572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] status updated from unknown to disconnected <7> [105.436600] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected <7> [105.436618] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] <7> [105.436802] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [105.436825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2] <7> [105.436940] i915 device info: pciid=0x4c8a rev=0x04 platform=ROCKETLAKE (subplatform=0x0) gen=12 <7> [105.436942] i915 device info: graphics version: 12 <7> [105.436943] i915 device info: media version: 12 <7> [105.436945] i915 device info: display version: 12 <7> [105.436947] i915 device info: graphics stepping: C0 <7> [105.436948] i915 device info: media stepping: C0 <7> [105.436949] i915 device info: display stepping: C0 <7> [105.436945] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] status updated from unknown to disconnected <7> [105.436950] i915 device info: base die stepping: ** <7> [105.436952] i915 device info: gt: 0 <7> [105.436953] i915 device info: memory-regions: 0x21 <7> [105.436954] i915 device info: page-sizes: 0x211000 <7> [105.436955] i915 device info: platform: ROCKETLAKE <7> [105.436957] i915 device info: ppgtt-size: 48 <7> [105.436958] i915 device info: ppgtt-type: 2 <7> [105.436960] i915 device info: dma_mask_size: 39 <7> [105.436961] i915 device info: is_mobile: no <7> [105.436962] i915 device info: is_lp: no <7> [105.436963] i915 device info: require_force_probe: no <7> [105.436965] i915 device info: is_dgfx: no <7> [105.436966] i915 device info: has_64bit_reloc: yes <7> [105.436967] i915 device info: has_64k_pages: no <7> [105.436968] i915 device info: gpu_reset_clobbers_display: no <7> [105.436962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected <7> [105.436970] i915 device info: has_reset_engine: yes <7> [105.436971] i915 device info: has_3d_pipeline: yes <7> [105.436972] i915 device info: has_4tile: no <7> [105.436973] i915 device info: has_flat_ccs: no <7> [105.436974] i915 device info: has_global_mocs: yes <7> [105.436975] i915 device info: has_gmd_id: no <7> [105.436977] i915 device info: has_gt_uc: yes <7> [105.436978] i915 device info: has_heci_pxp: no <7> [105.436980] i915 device info: has_heci_gscfi: no <7> [105.436981] i915 device info: has_guc_deprivilege: no <7> [105.436982] i915 device info: has_l3_ccs_read: no <7> [105.436983] i915 device info: has_l3_dpf: no <7> [105.436978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] <7> [105.436984] i915 device info: has_llc: yes <7> [105.436985] i915 device info: has_logical_ring_contexts: yes <7> [105.436986] i915 device info: has_logical_ring_elsq: yes <7> [105.436987] i915 device info: has_media_ratio_mode: no <7> [105.436988] i915 device info: has_mslice_steering: no <7> [105.436989] i915 device info: has_oa_bpc_reporting: no <7> [105.436992] i915 device info: has_oa_slice_contrib_limits: no <7> [105.436993] i915 device info: has_oam: no <7> [105.436994] i915 device info: has_one_eu_per_fuse_bit: no <7> [105.436995] i915 device info: has_pxp: yes <7> [105.436997] i915 device info: has_rc6: yes <7> [105.436998] i915 device info: has_rc6p: no <7> [105.436999] i915 device info: has_rps: yes <7> [105.437000] i915 device info: has_runtime_pm: yes <7> [105.437001] i915 device info: has_snoop: no <7> [105.437002] i915 device info: has_coherent_ggtt: no <7> [105.437004] i915 device info: tuning_thread_rr_after_dep: no <7> [105.437005] i915 device info: unfenced_needs_alignment: no <7> [105.437006] i915 device info: hws_needs_physical: no <7> [105.437007] i915 device info: has_pooled_eu: no <7> [105.437008] i915 device info: cursor_needs_physical: no <7> [105.437009] i915 device info: has_cdclk_crawl: no <7> [105.437010] i915 device info: has_cdclk_squash: no <7> [105.437012] i915 device info: has_ddi: yes <7> [105.437013] i915 device info: has_dp_mst: yes <7> [105.437014] i915 device info: has_dsb: yes <7> [105.437015] i915 device info: has_fpga_dbg: yes <7> [105.437016] i915 device info: has_gmch: no <7> [105.437017] i915 device info: has_hotplug: yes <7> [105.437018] i915 device info: has_hti: yes <7> [105.437020] i915 device info: has_ipc: yes <7> [105.437021] i915 device info: has_overlay: no <7> [105.437022] i915 device info: has_psr: yes <7> [105.437023] i915 device info: has_psr_hw_tracking: no <7> [105.437024] i915 device info: overlay_needs_physical: no <7> [105.437025] i915 device info: supports_tv: no <7> [105.437026] i915 device info: has_hdcp: yes <7> [105.437027] i915 device info: has_dmc: yes <7> [105.437029] i915 device info: has_dsc: yes <7> [105.437030] i915 device info: rawclk rate: 24000 kHz <7> [105.437031] i915 device info: iommu: enabled <7> [105.437033] i915 device info: available engines: 40403 <7> [105.437034] i915 device info: slice total: 1, mask=0001 <7> [105.437036] i915 device info: subslice total: 2 <7> [105.437037] i915 device info: slice0: 2 subslices, mask=00000003 <7> [105.437038] i915 device info: EU total: 32 <7> [105.437040] i915 device info: EU per subslice: 16 <7> [105.437041] i915 device info: has slice power gating: yes <7> [105.437042] i915 device info: has subslice power gating: no <7> [105.437043] i915 device info: has EU power gating: no <6> [105.437044] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [105.437046] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [105.437047] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <6> [105.437050] i915: Performing live selftests with st_random_seed=0x73c8c28a st_timeout=500 <7> [105.436993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1] <6> [105.437051] i915: Running vma <6> [105.437065] i915: Running i915_vma_live_selftests/igt_vma_remapped_gtt <7> [105.437109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] status updated from unknown to disconnected <7> [105.437123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected <7> [105.437133] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] <7> [105.437143] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3] <7> [105.437262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] status updated from unknown to disconnected <7> [105.437275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected <7> [105.437285] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [105.437289] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [105.437292] [drm:drm_client_modeset_probe] connector 144 enabled? no <7> [105.437294] [drm:drm_client_modeset_probe] connector 148 enabled? no <7> [105.437296] [drm:drm_client_modeset_probe] connector 155 enabled? no <7> [105.437319] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [105.437326] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [105.437338] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [105.437352] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [105.437818] [drm:drm_client_modeset_probe] <7> [105.437846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] <7> [105.437859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1] <7> [105.437985] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected <7> [105.437997] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] <7> [105.438007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2] <7> [105.438123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected <7> [105.438134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] <7> [105.438144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1] <7> [105.438258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected <7> [105.438269] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] <7> [105.438279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3] <7> [105.438386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected <7> [105.438396] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [105.438398] [drm:drm_client_modeset_probe] connector 134 enabled? no <7> [105.438401] [drm:drm_client_modeset_probe] connector 144 enabled? no <7> [105.438402] [drm:drm_client_modeset_probe] connector 148 enabled? no <7> [105.438404] [drm:drm_client_modeset_probe] connector 155 enabled? no <7> [105.438422] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [105.438429] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [105.438440] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [105.438454] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [105.459829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4 <7> [105.491105] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [105.552085] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <4> [105.596448] i915: probe of 0000:00:02.0 failed with error -25 <6> [105.798932] [IGT] i915_selftest: finished subtest vma, SUCCESS

<6> [104.145281] [IGT] i915_selftest: starting dynamic subtest vma

<5> [104.213123] Setting dangerous option live_selftests - tainting kernel

<7> [104.240368] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K

<7> [104.240541] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [104.240707] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Tiger Lake LP PCH

<7> [104.240838] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [104.241036] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [104.241372] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0001, instances: 0001

<7> [104.241468] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001

<7> [104.241772] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [104.241866] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [104.241949] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 60M

<6> [104.242028] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [104.242032] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [104.242231] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [104.242243] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x00000000a0200087

<7> [104.242366] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 61440K, usable: 59392K

<7> [104.242618] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x93ab8018

<7> [104.242789] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.1.0

<7> [104.242907] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [104.243017] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [104.243125] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [104.243252] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [104.243386] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [104.243480] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [104.243580] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=3201 tRP=22 tRDPRE=12 tRAS=52 tRCD=22 tRC=74

<7> [104.243727] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=9219 peakbw: 51216

<7> [104.243857] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=4 deratedbw=13170 peakbw: 51216

<7> [104.243984] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=2 deratedbw=16761 peakbw: 51216

<7> [104.244108] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=19408 peakbw: 51216

<7> [104.244224] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=20000 peakbw: 51216

<7> [104.244335] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=20000 peakbw: 51216

<7> [104.244578] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [104.244702] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT TIGERLAKE ", BDB version 243

<7> [104.244819] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 6, min size 7)

<7> [104.244935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 356, min size 5)

<7> [104.245050] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100)

<7> [104.245165] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [104.245280] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 780, min size 812)

<7> [104.245394] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34)

<7> [104.245506] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers

<7> [104.245644] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [104.245773] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1364, min size 1366)

<7> [104.245894] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305)

<7> [104.246012] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 58, min size 78)

<7> [104.246129] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822)

<7> [104.246243] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210)

<7> [104.246354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [104.246465] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [104.246575] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806

<7> [104.246696] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [104.246810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [104.246923] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [104.247035] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [104.247145] i915 0000:00:02.0: [drm:intel_bios_init [i915]] port D trying to use the same DDC pin (0x9) as port A, disabling port A DVI/HDMI support

<7> [104.247268] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [104.247391] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [104.247508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [104.247622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0

<7> [104.247747] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [104.247860] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0

<7> [104.247969] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [104.248080] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [104.248191] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a

<7> [104.248332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [104.248513] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.248662] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [104.248797] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.248930] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [104.249064] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.249210] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [104.249348] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.249481] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [104.249616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [104.249775] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [104.249905] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [104.250095] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [104.250219] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [104.250341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [104.250494] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY A Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.250649] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY A already enabled, won't reprogram it.

<7> [104.250791] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY B Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.250926] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY B already enabled, won't reprogram it.

<7> [104.251058] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY C Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.251191] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY C already enabled, won't reprogram it.

<7> [104.251319] i915 0000:00:02.0: [drm:icl_verify_procmon_ref_values [i915]] Combo PHY D Voltage/Process Info : 0.85V dot0 (low-voltage)

<7> [104.251445] i915 0000:00:02.0: [drm:icl_combo_phys_init [i915]] Combo PHY D already enabled, won't reprogram it.

<7> [104.251555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_3

<7> [104.251725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [104.251889] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/rkl_dmc_ver2_03.bin

<7> [104.252919] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [104.253020] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/rkl_dmc_ver2_03.bin (v2.3)

<7> [104.253339] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: no, original SAGV block time: 22 us

<7> [104.253482] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)

<7> [104.253613] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 25 (25.0 usec)

<7> [104.253753] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 25 (25.0 usec)

<7> [104.253862] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 25 (25.0 usec)

<7> [104.253967] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 33 (33.0 usec)

<7> [104.254069] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 73 (73.0 usec)

<7> [104.254169] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 123 (123.0 usec)

<7> [104.254269] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 143 (143.0 usec)

<7> [104.256230] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 2 display pipes available.

<7> [104.257878] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 180000 kHz, VCO 720000 kHz, ref 24000 kHz, bypass 12000 kHz, voltage level 0

<7> [104.258058] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 648000 kHz

<7> [104.258191] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1296000 kHz

<7> [104.258344] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI A/PHY A] using AUX A (VBT)

<7> [104.258483] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:133:DDI A/PHY A]

<7> [104.258610] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [104.258759] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [104.258883] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless

<7> [104.259007] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [104.259125] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [104.259240] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [104.259357] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [104.259470] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [104.259581] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [104.259734] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:133:DDI A/PHY A] initial power sequencer: PPS 0

<7> [104.259915] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [104.260029] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [104.260132] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [104.260231] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [104.260327] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [104.260491] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [104.260685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A

<7> [104.260907] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD on

<7> [104.261045] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [104.261210] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [104.261329] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [104.261480] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [104.261594] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [104.496640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.525639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.553640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.582640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.611638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.640638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.669639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.698639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.727639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.756639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.785639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.814639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.843639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.872639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.901640] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.930639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.959639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [104.988639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.017639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.046639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.075639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.104639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.133639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.162639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.191639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.220639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.249639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.278639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.307639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.336639] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.365638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.394638] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [105.394814] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [105.394829] i915 0000:00:02.0: [drm] [ENCODER:133:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [105.394883] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 turning VDD off

<7> [105.395092] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:133:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [105.395244] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A

<7> [105.395484] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:133:DDI B/PHY B] using AUX B (platform default)

<7> [105.395674] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:133:DDI B/PHY B]

<7> [105.395825] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:133:DDI B/PHY B] Using DDC pin 0x2 (VBT)

<7> [105.396105] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:143:DDI TC1/PHY C] using AUX D (platform default)

<7> [105.396217] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:143:DDI TC1/PHY C]

<7> [105.396319] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:143:DDI TC1/PHY C] Using DDC pin 0x9 (VBT)

<7> [105.396471] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:147:DDI TC2/PHY D] using AUX E (VBT)

<7> [105.396591] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:147:DDI TC2/PHY D]

<7> [105.396845] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:147:DDI TC2/PHY D]

<7> [105.396950] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:147:DDI TC2/PHY D] Using DDC pin 0xa (VBT)

<7> [105.397277] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: disabled

<7> [105.397432] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled

<7> [105.397555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [105.397685] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A

<7> [105.397797] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A

<7> [105.397903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A

<7> [105.398009] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A

<7> [105.398114] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A

<7> [105.398219] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B

<7> [105.398323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B

<7> [105.398426] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B

<7> [105.398528] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B

<7> [105.398640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B

<7> [105.398742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B

<7> [105.398846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:133:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [105.398949] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:143:DDI TC1/PHY C] hw state readout: disabled, pipe A

<7> [105.399051] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:147:DDI TC2/PHY D] hw state readout: disabled, pipe A

<7> [105.399149] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:149:DP-MST A] hw state readout: disabled, pipe A

<7> [105.399250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:150:DP-MST B] hw state readout: disabled, pipe B

<7> [105.399366] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [105.399497] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [105.399619] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [105.399769] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:134:HDMI-A-1] hw state readout: disabled

<7> [105.399887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:144:HDMI-A-2] hw state readout: disabled

<7> [105.400000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:148:DP-1] hw state readout: disabled

<7> [105.400111] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:155:HDMI-A-3] hw state readout: disabled

<7> [105.400222] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [105.400330] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz

<7> [105.400433] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz

<7> [105.400533] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz

<7> [105.400641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz

<7> [105.400742] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz

<7> [105.400839] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [105.400973] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz

<7> [105.401099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz

<7> [105.401213] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz

<7> [105.401323] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz

<7> [105.401428] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz

<7> [105.401530] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz

<7> [105.401652] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [105.401812] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: no [setup_hw_state]

<7> [105.401943] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state]

<7> [105.402065] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [105.402190] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [105.402350] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [105.402456] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [105.402557] MCR Steering: Default steering: group=0x0, instance=0x0

<7> [105.402567] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 3 GT workarounds on global

<7> [105.403285] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 11 engine workarounds on rcs'0

<7> [105.403411] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 whitelist workarounds on rcs'0

<7> [105.403523] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0

<7> [105.404374] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0

<7> [105.404500] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on bcs'0

<7> [105.404613] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on bcs'0

<7> [105.405028] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0

<7> [105.405138] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vcs'0

<7> [105.405420] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0

<7> [105.405526] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on vecs'0

<7> [105.411814] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:80:pipe A] not active, skipping

<7> [105.411951] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping

<7> [105.412070] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [105.412194] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [105.412673] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [105.412791] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [105.412880] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [105.412960] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [105.415798] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:134:HDMI-A-1] generating connector hotplug event

<7> [105.416198] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:144:HDMI-A-2] generating connector hotplug event

<7> [105.416621] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC2/DDI TC2/PHY D bus for card0-DP-1

<7> [105.417319] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:148:DP-1] generating connector hotplug event

<7> [105.417716] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:155:HDMI-A-3] generating connector hotplug event

<6> [105.417768] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [105.419025] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 4 outputs detected

<6> [105.430871] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [105.435271] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input27

<7> [105.435989] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x9010)

<7> [105.436378] [drm:drm_client_modeset_probe]

<7> [105.436417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1]

<7> [105.436377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4

<7> [105.436435] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1]

<7> [105.436572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] status updated from unknown to disconnected

<7> [105.436600] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected

<7> [105.436618] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2]

<7> [105.436802] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [105.436825] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2]

<7> [105.436940] i915 device info: pciid=0x4c8a rev=0x04 platform=ROCKETLAKE (subplatform=0x0) gen=12

<7> [105.436942] i915 device info: graphics version: 12

<7> [105.436943] i915 device info: media version: 12

<7> [105.436945] i915 device info: display version: 12

<7> [105.436947] i915 device info: graphics stepping: C0

<7> [105.436948] i915 device info: media stepping: C0

<7> [105.436949] i915 device info: display stepping: C0

<7> [105.436945] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] status updated from unknown to disconnected

<7> [105.436950] i915 device info: base die stepping: **

<7> [105.436952] i915 device info: gt: 0

<7> [105.436953] i915 device info: memory-regions: 0x21

<7> [105.436954] i915 device info: page-sizes: 0x211000

<7> [105.436955] i915 device info: platform: ROCKETLAKE

<7> [105.436957] i915 device info: ppgtt-size: 48

<7> [105.436958] i915 device info: ppgtt-type: 2

<7> [105.436960] i915 device info: dma_mask_size: 39

<7> [105.436961] i915 device info: is_mobile: no

<7> [105.436962] i915 device info: is_lp: no

<7> [105.436963] i915 device info: require_force_probe: no

<7> [105.436965] i915 device info: is_dgfx: no

<7> [105.436966] i915 device info: has_64bit_reloc: yes

<7> [105.436967] i915 device info: has_64k_pages: no

<7> [105.436968] i915 device info: gpu_reset_clobbers_display: no

<7> [105.436962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected

<7> [105.436970] i915 device info: has_reset_engine: yes

<7> [105.436971] i915 device info: has_3d_pipeline: yes

<7> [105.436972] i915 device info: has_4tile: no

<7> [105.436973] i915 device info: has_flat_ccs: no

<7> [105.436974] i915 device info: has_global_mocs: yes

<7> [105.436975] i915 device info: has_gmd_id: no

<7> [105.436977] i915 device info: has_gt_uc: yes

<7> [105.436978] i915 device info: has_heci_pxp: no

<7> [105.436980] i915 device info: has_heci_gscfi: no

<7> [105.436981] i915 device info: has_guc_deprivilege: no

<7> [105.436982] i915 device info: has_l3_ccs_read: no

<7> [105.436983] i915 device info: has_l3_dpf: no

<7> [105.436978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1]

<7> [105.436984] i915 device info: has_llc: yes

<7> [105.436985] i915 device info: has_logical_ring_contexts: yes

<7> [105.436986] i915 device info: has_logical_ring_elsq: yes

<7> [105.436987] i915 device info: has_media_ratio_mode: no

<7> [105.436988] i915 device info: has_mslice_steering: no

<7> [105.436989] i915 device info: has_oa_bpc_reporting: no

<7> [105.436992] i915 device info: has_oa_slice_contrib_limits: no

<7> [105.436993] i915 device info: has_oam: no

<7> [105.436994] i915 device info: has_one_eu_per_fuse_bit: no

<7> [105.436995] i915 device info: has_pxp: yes

<7> [105.436997] i915 device info: has_rc6: yes

<7> [105.436998] i915 device info: has_rc6p: no

<7> [105.436999] i915 device info: has_rps: yes

<7> [105.437000] i915 device info: has_runtime_pm: yes

<7> [105.437001] i915 device info: has_snoop: no

<7> [105.437002] i915 device info: has_coherent_ggtt: no

<7> [105.437004] i915 device info: tuning_thread_rr_after_dep: no

<7> [105.437005] i915 device info: unfenced_needs_alignment: no

<7> [105.437006] i915 device info: hws_needs_physical: no

<7> [105.437007] i915 device info: has_pooled_eu: no

<7> [105.437008] i915 device info: cursor_needs_physical: no

<7> [105.437009] i915 device info: has_cdclk_crawl: no

<7> [105.437010] i915 device info: has_cdclk_squash: no

<7> [105.437012] i915 device info: has_ddi: yes

<7> [105.437013] i915 device info: has_dp_mst: yes

<7> [105.437014] i915 device info: has_dsb: yes

<7> [105.437015] i915 device info: has_fpga_dbg: yes

<7> [105.437016] i915 device info: has_gmch: no

<7> [105.437017] i915 device info: has_hotplug: yes

<7> [105.437018] i915 device info: has_hti: yes

<7> [105.437020] i915 device info: has_ipc: yes

<7> [105.437021] i915 device info: has_overlay: no

<7> [105.437022] i915 device info: has_psr: yes

<7> [105.437023] i915 device info: has_psr_hw_tracking: no

<7> [105.437024] i915 device info: overlay_needs_physical: no

<7> [105.437025] i915 device info: supports_tv: no

<7> [105.437026] i915 device info: has_hdcp: yes

<7> [105.437027] i915 device info: has_dmc: yes

<7> [105.437029] i915 device info: has_dsc: yes

<7> [105.437030] i915 device info: rawclk rate: 24000 kHz

<7> [105.437031] i915 device info: iommu: enabled

<7> [105.437033] i915 device info: available engines: 40403

<7> [105.437034] i915 device info: slice total: 1, mask=0001

<7> [105.437036] i915 device info: subslice total: 2

<7> [105.437037] i915 device info: slice0: 2 subslices, mask=00000003

<7> [105.437038] i915 device info: EU total: 32

<7> [105.437040] i915 device info: EU per subslice: 16

<7> [105.437041] i915 device info: has slice power gating: yes

<7> [105.437042] i915 device info: has subslice power gating: no

<7> [105.437043] i915 device info: has EU power gating: no

<6> [105.437044] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [105.437046] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [105.437047] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<6> [105.437050] i915: Performing live selftests with st_random_seed=0x73c8c28a st_timeout=500

<7> [105.436993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1]

<6> [105.437065] i915: Running i915_vma_live_selftests/igt_vma_remapped_gtt

<7> [105.437109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] status updated from unknown to disconnected

<7> [105.437123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected

<7> [105.437133] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3]

<7> [105.437143] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3]

<7> [105.437262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] status updated from unknown to disconnected

<7> [105.437275] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected

<7> [105.437285] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [105.437289] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [105.437292] [drm:drm_client_modeset_probe] connector 144 enabled? no

<7> [105.437294] [drm:drm_client_modeset_probe] connector 148 enabled? no

<7> [105.437296] [drm:drm_client_modeset_probe] connector 155 enabled? no

<7> [105.437319] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [105.437326] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [105.437338] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [105.437352] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [105.437818] [drm:drm_client_modeset_probe]

<7> [105.437846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1]

<7> [105.437859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:134:HDMI-A-1]

<7> [105.437985] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:134:HDMI-A-1] disconnected

<7> [105.437997] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2]

<7> [105.438007] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:144:HDMI-A-2]

<7> [105.438123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:144:HDMI-A-2] disconnected

<7> [105.438134] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1]

<7> [105.438144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:148:DP-1]

<7> [105.438258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:148:DP-1] disconnected

<7> [105.438269] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3]

<7> [105.438279] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:155:HDMI-A-3]

<7> [105.438386] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:155:HDMI-A-3] disconnected

<7> [105.438396] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [105.438398] [drm:drm_client_modeset_probe] connector 134 enabled? no

<7> [105.438401] [drm:drm_client_modeset_probe] connector 144 enabled? no

<7> [105.438402] [drm:drm_client_modeset_probe] connector 148 enabled? no

<7> [105.438404] [drm:drm_client_modeset_probe] connector 155 enabled? no

<7> [105.438422] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [105.438429] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [105.438440] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [105.438454] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [105.459829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_4

<7> [105.491105] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [105.552085] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<4> [105.596448] i915: probe of 0000:00:02.0 failed with error -25

<6> [105.798932] [IGT] i915_selftest: finished subtest vma, SUCCESS

Results for igt@i915_selftest@live@vma