igt@i915_pm_rpm@module-reload on fi-kbl-x1275@linus-v6.5-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g354c536a4 (x86_64) (Linux: 6.5.0-rc3-linus-v6.5-rc3-g6eaae1980760+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x450 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x5b/0x80 vfs_read+0xb0/0x320 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x345/0x450 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x5b/0x80 vfs_read+0xb0/0x320 Wakeref count: 0 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Stack trace: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1255 __igt_unique____real_main2421() #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() #3 [__libc_start_main+0xf3] #4 [_start+0x2e] Subtest module-reload: FAIL (36.047s)
Err	Starting subtest: module-reload (i915_pm_rpm:5379) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5379) CRITICAL: Test assertion failure function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2600: (i915_pm_rpm:5379) CRITICAL: Failed assertion: setup_environment(true) Subtest module-reload failed. ** DEBUG (i915_pm_rpm:5379) DEBUG: Reload w/o display (i915_pm_rpm:5379) igt_kmod-DEBUG: Module snd_hda_intel unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module i915 unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module drm_display_helper unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module drm_kms_helper unloaded immediately (i915_pm_rpm:5379) igt_kmod-INFO: Reloading i915 with disable_display=1 mmio_debug=-1 (i915_pm_rpm:5379) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (i915_pm_rpm:5379) DEBUG: Test requirement passed: drm_fd != -1 (i915_pm_rpm:5379) DEBUG: Test requirement passed: debugfs != -1 (i915_pm_rpm:5379) igt_pm-DEBUG: Failed to enable audio runtime PM! (3) (i915_pm_rpm:5379) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto' (i915_pm_rpm:5379) INFO: Runtime PM support: 1 (i915_pm_rpm:5379) INFO: PC8 residency support: 0 (i915_pm_rpm:5379) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:5379) igt_pm-INFO: DMC: fw loaded: yes (i915_pm_rpm:5379) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs) (i915_pm_rpm:5379) INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_dmc_debugfs_status_show+0x3b/0x450 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x5b/0x80 vfs_read+0xb0/0x320 ksys_read+0x64/0xe0 do_syscall_64+0x3f/0x90 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_dmc_debugfs_status_show+0x345/0x450 [i915] seq_read_iter+0x114/0x450 seq_read+0xab/0xe0 full_proxy_read+0x5b/0x80 vfs_read+0xb0/0x320 Wakeref count: 0 (i915_pm_rpm:5379) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 95ms (i915_pm_rpm:5379) igt_device-DEBUG: Test requirement passed: pci_dev (i915_pm_rpm:5379) DEBUG: device_in_pci_d3: PCI D3 state=3 (i915_pm_rpm:5379) DEBUG: device_in_pci_d3(pci_dev) took 0ms (i915_pm_rpm:5379) igt_pm-DEBUG: Restoring runtime PM management to '10000' and 'auto' (i915_pm_rpm:5379) DEBUG: Reload as normal (i915_pm_rpm:5379) igt_kmod-DEBUG: Module snd_hda_intel unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module i915 unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module drm_display_helper unloaded immediately (i915_pm_rpm:5379) igt_kmod-DEBUG: Module drm_kms_helper unloaded immediately (i915_pm_rpm:5379) igt_kmod-INFO: Reloading i915 with mmio_debug=-1 (i915_pm_rpm:5379) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (i915_pm_rpm:5379) DEBUG: Test requirement passed: drm_fd != -1 (i915_pm_rpm:5379) DEBUG: Test requirement passed: debugfs != -1 (i915_pm_rpm:5379) igt_kms-DEBUG: VT: graphics mode set (mode was 0x1) (i915_pm_rpm:5379) igt_kms-DEBUG: display: init { (i915_pm_rpm:5379) igt_chamelium-DEBUG: No configuration file available for chamelium (i915_pm_rpm:5379) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: display: DP-2: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: display: DP-2: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: display: HDMI-A-1: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: display: HDMI-A-1: Selecting pipe None (i915_pm_rpm:5379) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5379) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5379) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5379) igt_kms-DEBUG: display: } (i915_pm_rpm:5379) igt_pm-DEBUG: Failed to enable audio runtime PM! (3) (i915_pm_rpm:5379) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto' (i915_pm_rpm:5379) INFO: Runtime PM support: 1 (i915_pm_rpm:5379) INFO: PC8 residency support: 0 (i915_pm_rpm:5379) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:5379) igt_pm-INFO: DMC: fw loaded: yes (i915_pm_rpm:5379) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs) (i915_pm_rpm:5379) INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_atomic_commit_tail+0xa3f/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 Wakeref count: 0 (i915_pm_rpm:5379) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5379) igt_debugfs-INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_display_power_flush_work+0xdf/0xf0 [i915] intel_dp_detect+0x231/0x640 [i915] drm_helper_probe_detect_ctx+0x45/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] (i915_pm_rpm:5379) CRITICAL: Test assertion failure function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2600: (i915_pm_rpm:5379) CRITICAL: Failed assertion: setup_environment(true) (i915_pm_rpm:5379) igt_core-INFO: Stack trace: (i915_pm_rpm:5379) igt_core-INFO: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() (i915_pm_rpm:5379) igt_core-INFO: #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1255 __igt_unique____real_main2421() (i915_pm_rpm:5379) igt_core-INFO: #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() (i915_pm_rpm:5379) igt_core-INFO: #3 [__libc_start_main+0xf3] (i915_pm_rpm:5379) igt_core-INFO: #4 [_start+0x2e] END ** Subtest module-reload: FAIL (36.047s)
Dmesg	<6> [175.170233] [IGT] i915_pm_rpm: executing <7> [175.177617] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [175.177996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [175.178013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [175.178284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [175.178463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.178869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.179458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.179808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [175.179880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [175.179892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [175.180062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.180617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [175.181112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [175.181740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [175.183223] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [175.184207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [175.184830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [175.185051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [175.185185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.185322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.185937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.186100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [175.186165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [175.186176] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [175.186295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.187655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.187775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [175.188456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.188936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.188942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [175.189056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [175.213672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.213677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [175.213795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.213928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [175.217558] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [175.217574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [175.217706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.218170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.218306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [175.218764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [175.218778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [175.218901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.219372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [175.219902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [175.220466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [175.221765] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [175.222835] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [175.223591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [175.223754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [175.223883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.224009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.224652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.224821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [175.225247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [175.225260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [175.225379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.226574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.226703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [175.227401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.227914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.227918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [175.228040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [175.254234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.254239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [175.254354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.254521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [175.254842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [175.254855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [175.254977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.255448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.255633] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [175.255659] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [175.255670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [175.255816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.256274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [175.256816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [175.257352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [175.258486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [175.259428] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [175.260181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [175.260331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [175.260462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [175.260633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [175.261243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.261376] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [175.261403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [175.261413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [175.261540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [175.262799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.262921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [175.263625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [175.264093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.264097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [175.264204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [175.290460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [175.290465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [175.290616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [175.290795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [185.598689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.604524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.349606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.358723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.360175] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [186.360610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.361053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.361828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.362646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.362967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.363093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.363695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.363911] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [186.363988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.364141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.364594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.365153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.365291] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.365417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.366043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.366246] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [186.366322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.366447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.366943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.367534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.367701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.367826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.368414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.368808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.369074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.369895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.370048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.370067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.370188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.370704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.371232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.371808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.373026] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.374118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.374876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.375137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.375272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.375402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.376035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.376318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.376334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.376457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.377923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.378039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.378754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.379847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.379851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.379972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.407796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.407801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.407917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.408214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.409239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.411480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [186.471072] [IGT] i915_pm_rpm: starting subtest module-reload <7> [186.578524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.583576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.584320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.584549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.584881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.585812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.586414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.586834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [186.587167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [186.587512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [186.587838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [186.588228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.588286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.589775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.590757] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.591533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.591748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.592229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.592395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.592834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.593031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.593038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.593151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.597464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.597469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.597623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.624713] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [186.674404] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [187.068581] [IGT] Reloading i915 w/o display <7> [187.267891] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [187.268102] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [187.268265] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [187.268412] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [187.268752] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [187.268955] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [187.269745] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [187.269919] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [187.270087] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [187.270254] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [187.270260] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [187.270658] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [187.270682] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [187.270879] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [187.271314] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [187.271612] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [187.271832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [187.272031] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [187.272230] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [187.277134] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [187.277338] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [187.277579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [187.277798] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [187.278000] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [187.278162] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [187.278358] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [187.278525] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [187.278759] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [187.278914] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [187.279068] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [187.279222] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [187.279374] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [187.279556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [187.280130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [187.280347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [187.280610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [187.280842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [187.281055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [187.281284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [187.281514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [187.281732] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [187.281948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [187.282198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [187.282428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [187.282701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [187.282927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [187.283136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [187.283342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [187.283614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [187.283878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [187.284090] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [187.284297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [187.284534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [187.284760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [187.284966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [187.285192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [187.285405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [187.285629] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [187.285856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [187.286108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [187.286316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [187.286541] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [187.287195] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [187.287412] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [187.287655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [187.287926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.288138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.288348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [187.288585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.288839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [187.289054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [187.289268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [187.289493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [187.289751] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [187.290457] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <7> [187.291003] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <6> [187.291173] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [187.291158] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [187.291309] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [187.291458] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [187.291682] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [187.291864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [187.292011] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [187.292157] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [187.292304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [187.292450] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [187.293564] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [187.294540] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [187.294790] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [187.294940] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [187.297485] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [187.297667] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [187.297815] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [187.297960] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [187.298112] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [187.298258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [187.298403] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [187.298600] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [187.298775] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [187.298921] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [187.299065] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [187.299249] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [187.299453] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [187.299637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [187.299808] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [187.299941] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [187.300073] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [187.300275] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [187.300731] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [187.300896] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [187.301105] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [187.301294] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [187.301569] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [187.301757] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [187.521484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.532485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.543485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.554486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.565484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.576484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.587485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.598485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.609484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.620484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.631485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.642486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.653484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.664486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.675485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.686485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.697484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.708484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.719485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.730485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.741484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.752484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.763485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.774487] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.785484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.796484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.807485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.818486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.829484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.840484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.851485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.862486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [187.862666] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [187.862689] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [187.862755] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [187.862953] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [187.863148] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [187.863298] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [187.863723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [187.863876] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [187.864040] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [187.864355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [187.864548] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [187.864719] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [187.864937] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present <7> [187.865085] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [187.865490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [187.865726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [187.865900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [187.866047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [187.866194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [187.866340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [187.866513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [187.866712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [187.866859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [187.867005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [187.867151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [187.867295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [187.867463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [187.867628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [187.867831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [187.867971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [187.868135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [187.868326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [187.868466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [187.868656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [187.868842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [187.868994] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [187.869144] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [187.869292] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [187.869468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [187.869664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [187.869844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [187.869985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [187.870125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [187.870265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [187.870404] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [187.870594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [187.870773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [187.870914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [187.871054] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [187.871201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [187.871344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [187.871526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [187.871728] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [187.871907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [187.872055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [187.872200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [187.872365] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [187.872574] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [187.872786] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [187.872927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [187.873092] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [187.873206] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [187.873326] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [187.873464] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [187.874571] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [187.874711] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [187.874846] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [187.885457] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [187.885762] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [187.885912] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [187.886059] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [187.886205] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [187.886369] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [187.886969] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [187.887113] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [187.887218] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [187.887320] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [187.890698] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [187.891440] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [187.891790] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [187.892346] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [187.892748] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [187.892797] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [187.894251] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [187.906321] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [187.908188] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 <7> [187.909133] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [187.909965] [drm:drm_client_modeset_probe] <7> [187.909915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [187.910162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [187.910337] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [187.910384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [187.910391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.910619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [187.910638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [187.910927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [187.910949] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [187.910967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.911228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [187.911255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [187.911274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [187.911292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.911383] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [187.911607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [187.911634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [187.911645] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [187.911650] i915 device info: graphics version: 9 <7> [187.911653] i915 device info: media version: 9 <7> [187.911654] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [187.911656] i915 device info: display version: 9 <7> [187.911659] i915 device info: graphics stepping: F0 <7> [187.911662] i915 device info: media stepping: F0 <7> [187.911664] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [187.911664] i915 device info: display stepping: C0 <7> [187.911668] i915 device info: base die stepping: <7> [187.911669] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [187.911672] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [187.911672] i915 device info: gt: 2 <7> [187.911676] i915 device info: memory-regions: 0x21 <7> [187.911678] i915 device info: page-sizes: 0x11000 <7> [187.911681] i915 device info: platform: KABYLAKE <7> [187.911684] i915 device info: ppgtt-size: 48 <7> [187.911686] i915 device info: ppgtt-type: 2 <7> [187.911689] i915 device info: dma_mask_size: 39 <7> [187.911692] i915 device info: is_mobile: no <7> [187.911695] i915 device info: is_lp: no <7> [187.911697] i915 device info: require_force_probe: no <7> [187.911700] i915 device info: is_dgfx: no <7> [187.911703] i915 device info: has_64bit_reloc: yes <7> [187.911705] i915 device info: has_64k_pages: no <7> [187.911708] i915 device info: gpu_reset_clobbers_display: no <7> [187.911711] i915 device info: has_reset_engine: yes <7> [187.911713] i915 device info: has_3d_pipeline: yes <7> [187.911716] i915 device info: has_4tile: no <7> [187.911719] i915 device info: has_flat_ccs: no <7> [187.911721] i915 device info: has_global_mocs: no <7> [187.911724] i915 device info: has_gmd_id: no <7> [187.911726] i915 device info: has_gt_uc: yes <7> [187.911729] i915 device info: has_heci_pxp: no <7> [187.911732] i915 device info: has_heci_gscfi: no <7> [187.911734] i915 device info: has_guc_deprivilege: no <7> [187.911737] i915 device info: has_l3_ccs_read: no <7> [187.911740] i915 device info: has_l3_dpf: no <7> [187.911742] i915 device info: has_llc: yes <7> [187.911745] i915 device info: has_logical_ring_contexts: yes <7> [187.911748] i915 device info: has_logical_ring_elsq: no <7> [187.911750] i915 device info: has_media_ratio_mode: no <7> [187.911753] i915 device info: has_mslice_steering: no <7> [187.911755] i915 device info: has_oa_bpc_reporting: no <7> [187.911758] i915 device info: has_oa_slice_contrib_limits: no <7> [187.911760] i915 device info: has_oam: no <7> [187.911763] i915 device info: has_one_eu_per_fuse_bit: no <7> [187.911766] i915 device info: has_pxp: no <7> [187.911768] i915 device info: has_rc6: yes <7> [187.911771] i915 device info: has_rc6p: no <7> [187.911773] i915 device info: has_rps: yes <7> [187.911776] i915 device info: has_runtime_pm: yes <7> [187.911779] i915 device info: has_snoop: no <7> [187.911781] i915 device info: has_coherent_ggtt: yes <7> [187.911781] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [187.911784] i915 device info: tuning_thread_rr_after_dep: no <7> [187.911787] i915 device info: unfenced_needs_alignment: no <7> [187.911790] i915 device info: hws_needs_physical: no <7> [187.911792] i915 device info: has_pooled_eu: no <7> [187.911795] i915 device info: cursor_needs_physical: no <7> [187.911797] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [187.911798] i915 device info: has_cdclk_crawl: no <7> [187.911801] i915 device info: has_cdclk_squash: no <7> [187.911804] i915 device info: has_ddi: yes <7> [187.911806] i915 device info: has_dp_mst: yes <7> [187.911809] i915 device info: has_dsb: no <7> [187.911812] i915 device info: has_fpga_dbg: yes <7> [187.911814] i915 device info: has_gmch: no <7> [187.911817] i915 device info: has_hotplug: yes <7> [187.911820] i915 device info: has_hti: no <7> [187.911822] i915 device info: has_ipc: yes <7> [187.911825] i915 device info: has_overlay: no <7> [187.911827] i915 device info: has_psr: yes <7> [187.911830] i915 device info: has_psr_hw_tracking: yes <7> [187.911833] i915 device info: overlay_needs_physical: no <7> [187.911835] i915 device info: supports_tv: no <7> [187.911828] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [187.911838] i915 device info: has_hdcp: yes <7> [187.911840] i915 device info: has_dmc: yes <7> [187.911842] i915 device info: has_dsc: no <7> [187.911846] i915 device info: rawclk rate: 24000 kHz <7> [187.911848] i915 device info: iommu: enabled <7> [187.911851] i915 device info: available engines: 40403 <7> [187.911854] i915 device info: slice total: 1, mask=0001 <6> [187.911857] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [187.911857] i915 device info: subslice total: 3 <7> [187.911861] i915 device info: slice0: 3 subslices, mask=00000007 <7> [187.911864] i915 device info: slice1: 0 subslices, mask=00000000 <7> [187.911867] i915 device info: slice2: 0 subslices, mask=00000000 <7> [187.911870] i915 device info: EU total: 24 <7> [187.911872] i915 device info: EU per subslice: 8 <7> [187.911875] i915 device info: has slice power gating: no <7> [187.911877] i915 device info: has subslice power gating: no <7> [187.911880] i915 device info: has EU power gating: yes <6> [187.911883] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [187.911886] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [187.911889] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [187.913783] [drm:drm_client_modeset_probe] <7> [187.914065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [187.914119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.914312] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [187.914333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [187.914351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.914567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [187.914588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [187.914606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.914773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [187.914792] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [187.914801] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [187.914806] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [187.914810] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [187.914918] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [187.914937] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [187.914969] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [187.914997] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [187.918322] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [188.070889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.071304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.071538] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.071756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.072395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [198.961700] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [198.968319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [198.992926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [198.999587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [198.999850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [198.999888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [198.999934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [199.000117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [199.000145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [199.000369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [199.000959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [199.006613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [199.215655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [199.223771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [199.224110] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [199.224151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [199.224460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [199.224534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [199.224958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [199.224888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [199.225765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [199.226117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [199.226764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [199.227409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [199.227966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [199.228293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [199.228663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [199.228984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [199.254700] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [199.291768] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [199.662524] [IGT] Reloading i915 as normal <7> [199.812202] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [199.812417] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no) <7> [199.812616] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [199.812803] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [199.813046] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [199.813180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [199.813882] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [199.813998] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [199.814106] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M <6> [199.814211] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [199.814215] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [199.814428] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [199.814442] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047 <7> [199.814619] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K <7> [199.814942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018 <7> [199.815101] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [199.815240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [199.815376] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [199.815579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [199.819518] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [199.819697] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [199.819844] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [199.819990] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [199.820137] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [199.820249] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [199.820363] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [199.820499] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [199.820599] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [199.820697] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [199.820794] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [199.820890] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [199.820986] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [199.821104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [199.821665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [199.821861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196 <7> [199.822023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [199.822182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [199.822341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [199.822550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [199.822735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812) <7> [199.822884] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34) <7> [199.823032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [199.823181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [199.823329] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [199.823508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [199.823670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [199.823815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [199.823960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6 <7> [199.824108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [199.824271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [199.824418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [199.824604] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [199.824785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7> [199.824948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [199.825147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3 <7> [199.825314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [199.825460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3 <7> [199.825650] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [199.825847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [199.826032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [199.826194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [199.826341] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os <7> [199.827031] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [199.827180] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz <7> [199.827340] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [199.827568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [199.827713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [199.827858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [199.828016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [199.828202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [199.828349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [199.828520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [199.828683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [199.828894] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin <7> [199.829950] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6> [199.830178] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) <7> [199.830432] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [199.830646] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [199.830792] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [199.830930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [199.831068] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [199.831204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [199.831341] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [199.831486] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [199.831666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [199.831803] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [199.832919] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [199.834309] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [199.834624] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT) <7> [199.834837] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A] <7> [199.837539] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0) <7> [199.837706] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7> [199.837855] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7> [199.838000] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static <7> [199.838151] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [199.838297] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7> [199.838441] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7> [199.838634] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7> [199.838779] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7> [199.838924] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0 <7> [199.839069] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1 <7> [199.839252] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0 <7> [199.839455] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000 <7> [199.839695] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7> [199.839845] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7> [199.839977] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7> [199.840108] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7> [199.840347] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06 <7> [199.840712] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on <7> [199.840872] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle <7> [199.841087] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [199.841244] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7> [199.841441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008 <7> [199.841637] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [200.057484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.068483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.079484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.090484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.101483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.112483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.123483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.134484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.145483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.156483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.167485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.178483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.189483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.200484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.211484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.222483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.233484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.244483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.255483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.266484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.277482] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.288483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.299485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.310483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.321483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.332484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.343484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.354483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.365485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.376483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.387484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.398484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f) <7> [200.398662] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [200.398684] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [200.398747] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off <7> [200.398947] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000 <7> [200.399138] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT) <7> [200.399288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B] <7> [200.399675] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.399827] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT) <7> [200.400006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C] <7> [200.400266] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [200.400409] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C] <7> [200.400595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [200.400841] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present <7> [200.400989] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present <7> [200.401364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [200.401582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [200.401778] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [200.401925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [200.402071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [200.402216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [200.402361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [200.402543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [200.402739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [200.402882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [200.403061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [200.403205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [200.403350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [200.403515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A <7> [200.403673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B <7> [200.403847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C <7> [200.404024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A <7> [200.404163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A <7> [200.404301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B <7> [200.404440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C <7> [200.404637] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [200.404788] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [200.404936] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [200.405083] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [200.405257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled <7> [200.405408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled <7> [200.405609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled <7> [200.405750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [200.405890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [200.406029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [200.406168] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [200.406316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [200.406458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [200.406648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [200.406787] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [200.406934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [200.407110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [200.407249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [200.407388] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [200.407624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [200.407789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [200.408005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [200.408149] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [200.408294] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.408435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.408616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [200.408780] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [200.408892] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000] <7> [200.409013] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [200.409149] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [200.410109] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [200.410248] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [200.410381] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0 <7> [200.420550] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [200.420807] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [200.420957] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [200.421103] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [200.421249] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [200.421411] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [200.421972] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [200.422086] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [200.422219] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [200.422322] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [200.424665] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7> [200.425695] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event <7> [200.426199] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2 <7> [200.427011] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event <7> [200.427546] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event <6> [200.427613] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [200.429863] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected <6> [200.442397] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [200.444259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8 <7> [200.444954] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [200.445725] [drm:drm_client_modeset_probe] <7> [200.445674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [200.445942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [200.446050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [200.446102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.446160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [200.446375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [200.447070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.447394] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [200.447464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.447619] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9 <7> [200.447623] i915 device info: graphics version: 9 <7> [200.447626] i915 device info: media version: 9 <7> [200.447628] i915 device info: display version: 9 <7> [200.447630] i915 device info: graphics stepping: F0 <7> [200.447632] i915 device info: media stepping: F0 <7> [200.447634] i915 device info: display stepping: C0 <7> [200.447636] i915 device info: base die stepping: <7> [200.447638] i915 device info: gt: 2 <7> [200.447641] i915 device info: memory-regions: 0x21 <7> [200.447643] i915 device info: page-sizes: 0x11000 <7> [200.447645] i915 device info: platform: KABYLAKE <7> [200.447647] i915 device info: ppgtt-size: 48 <7> [200.447649] i915 device info: ppgtt-type: 2 <7> [200.447651] i915 device info: dma_mask_size: 39 <7> [200.447653] i915 device info: is_mobile: no <7> [200.447655] i915 device info: is_lp: no <7> [200.447657] i915 device info: require_force_probe: no <7> [200.447659] i915 device info: is_dgfx: no <7> [200.447662] i915 device info: has_64bit_reloc: yes <7> [200.447664] i915 device info: has_64k_pages: no <7> [200.447666] i915 device info: gpu_reset_clobbers_display: no <7> [200.447668] i915 device info: has_reset_engine: yes <7> [200.447670] i915 device info: has_3d_pipeline: yes <7> [200.447672] i915 device info: has_4tile: no <7> [200.447674] i915 device info: has_flat_ccs: no <7> [200.447676] i915 device info: has_global_mocs: no <7> [200.447689] i915 device info: has_gmd_id: no <7> [200.447691] i915 device info: has_gt_uc: yes <7> [200.447694] i915 device info: has_heci_pxp: no <7> [200.447696] i915 device info: has_heci_gscfi: no <7> [200.447699] i915 device info: has_guc_deprivilege: no <7> [200.447702] i915 device info: has_l3_ccs_read: no <7> [200.447704] i915 device info: has_l3_dpf: no <7> [200.447707] i915 device info: has_llc: yes <7> [200.447709] i915 device info: has_logical_ring_contexts: yes <7> [200.447712] i915 device info: has_logical_ring_elsq: no <7> [200.447714] i915 device info: has_media_ratio_mode: no <7> [200.447717] i915 device info: has_mslice_steering: no <7> [200.447719] i915 device info: has_oa_bpc_reporting: no <7> [200.447722] i915 device info: has_oa_slice_contrib_limits: no <7> [200.447725] i915 device info: has_oam: no <7> [200.447727] i915 device info: has_one_eu_per_fuse_bit: no <7> [200.447730] i915 device info: has_pxp: no <7> [200.447732] i915 device info: has_rc6: yes <7> [200.447735] i915 device info: has_rc6p: no <7> [200.447737] i915 device info: has_rps: yes <7> [200.447740] i915 device info: has_runtime_pm: yes <7> [200.447742] i915 device info: has_snoop: no <7> [200.447745] i915 device info: has_coherent_ggtt: yes <7> [200.447748] i915 device info: tuning_thread_rr_after_dep: no <7> [200.447750] i915 device info: unfenced_needs_alignment: no <7> [200.447752] i915 device info: hws_needs_physical: no <7> [200.447755] i915 device info: has_pooled_eu: no <7> [200.447757] i915 device info: cursor_needs_physical: no <7> [200.447760] i915 device info: has_cdclk_crawl: no <7> [200.447762] i915 device info: has_cdclk_squash: no <7> [200.447765] i915 device info: has_ddi: yes <7> [200.447767] i915 device info: has_dp_mst: yes <7> [200.447770] i915 device info: has_dsb: no <7> [200.447772] i915 device info: has_fpga_dbg: yes <7> [200.447775] i915 device info: has_gmch: no <7> [200.447777] i915 device info: has_hotplug: yes <7> [200.447780] i915 device info: has_hti: no <7> [200.447782] i915 device info: has_ipc: yes <7> [200.447785] i915 device info: has_overlay: no <7> [200.447787] i915 device info: has_psr: yes <7> [200.447789] i915 device info: has_psr_hw_tracking: yes <7> [200.447792] i915 device info: overlay_needs_physical: no <7> [200.447794] i915 device info: supports_tv: no <7> [200.447797] i915 device info: has_hdcp: yes <7> [200.447799] i915 device info: has_dmc: yes <7> [200.447802] i915 device info: has_dsc: no <7> [200.447804] i915 device info: rawclk rate: 24000 kHz <7> [200.447807] i915 device info: iommu: enabled <7> [200.447810] i915 device info: available engines: 40403 <7> [200.447813] i915 device info: slice total: 1, mask=0001 <7> [200.447815] i915 device info: subslice total: 3 <7> [200.447818] i915 device info: slice0: 3 subslices, mask=00000007 <7> [200.447821] i915 device info: slice1: 0 subslices, mask=00000000 <7> [200.447823] i915 device info: slice2: 0 subslices, mask=00000000 <7> [200.447826] i915 device info: EU total: 24 <7> [200.447828] i915 device info: EU per subslice: 8 <7> [200.447831] i915 device info: has slice power gating: no <7> [200.447833] i915 device info: has subslice power gating: no <7> [200.447729] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.447836] i915 device info: has EU power gating: yes <6> [200.447839] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [200.447841] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [200.447843] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [200.447954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.448673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.449276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected <7> [200.449577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.449601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.449620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.449898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.450549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.451134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.451715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.453488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.454683] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.455375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.455584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.455750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.455898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.456553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.456727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected <7> [200.456748] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.456761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.456772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.456921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.458888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.459107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.459878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.460391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.460396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.460582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.493407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.493417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.493688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.493956] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected <7> [200.493987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [200.494004] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.494018] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.494023] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [200.494027] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [200.494198] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.494222] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.494307] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [200.494335] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.495290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.495456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.496077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.496675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.496843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.496991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.497644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.497977] [drm:drm_client_modeset_probe] <7> [200.498262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [200.498316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.498651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.499378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.499621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.499644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.499663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.499850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.500403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.500973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.501560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.503258] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.503259] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [200.503942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.504634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.504990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.505189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.505382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.506054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.506261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.506287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.506307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.506504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.508029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.508207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.509499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.510012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.510020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.510188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.538146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.538154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.538326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.538561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [200.538596] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.538605] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.538609] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [200.538613] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [200.538698] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.538717] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.538755] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [200.538765] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <6> [200.538783] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.538783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.538881] [drm:drm_client_modeset_probe] <7> [200.539069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.539791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.539933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.539947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [200.539969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.540154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.540696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.540903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.540924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.540943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.541135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.541701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.542190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.542834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.544100] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.545213] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.546013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.546168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.546302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.546432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.547053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.547203] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.547218] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.547229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.547349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.548459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.548606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.549293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.549815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.549820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.549928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.578914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.578919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.579032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.579166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [200.579180] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [200.579183] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [200.579185] [drm:drm_client_modeset_probe] connector 107 enabled? no <7> [200.579187] [drm:drm_client_modeset_probe] connector 113 enabled? no <7> [200.579221] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [200.579229] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [200.579380] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [200.579394] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [200.579461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.579502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.579682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.580172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.580743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.581272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.582771] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.583833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.584488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.584753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.584884] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.585010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.585611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.585758] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.585828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.585839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.585958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.587374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.587512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.588699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.589225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.589229] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.589337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.616081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.616085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.616198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.616331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [200.618823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [200.618839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.618965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.619425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.619602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.620062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.620075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.620194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.620676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.621183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.621774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.622914] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.623996] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.624755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.624904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.625036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.625164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.625776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.625910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.626334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.626346] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.626464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.627617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.627727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.628408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.628929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.628933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.629070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.656905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.656909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.657034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.657165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [200.657460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [200.657480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [200.657635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.658090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.658251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [200.658276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [200.658286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [200.658403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.658934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [200.659425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [200.660024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [200.661133] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [200.661899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [200.662649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [200.662808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [200.662936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [200.663060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [200.663661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.663807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [200.663833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [200.663844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [200.663960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [200.665021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.665141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [200.665892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [200.666339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.666343] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [200.666502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [200.693260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [200.693264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [200.693375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [200.693545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [211.734684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.739533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.764065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.772378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [211.772983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.773282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.773690] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [211.774374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.775021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [211.775538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.775800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.776412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.777068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.777300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.777544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.778200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.778372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.779904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [211.780073] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [211.781947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.806511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.811600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.811813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.812331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.812933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.813509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [211.815313] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [211.816311] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [211.817012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [211.817271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.817406] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.817561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.818179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.818410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [211.818429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [211.818588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.819970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [211.820124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.820810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [211.821321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [211.821327] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.821464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [211.845537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [211.845542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [211.845669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.845953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.846984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [211.848370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.872770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.878641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.878809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.878957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.879409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.879986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.880175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.880323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.880979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.881143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.881665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [211.882091] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [211.885317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.909768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.914577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.914730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.915250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.915451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [211.915506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [211.915691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.916195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.916716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.917281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [211.918520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [211.919533] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [211.920220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [211.920431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.920632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.920812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.921454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.921661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [211.921687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [211.921856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.923002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [211.923160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.923886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [211.924381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [211.924387] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.924552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [211.948647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [211.948654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [211.948796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.948954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.949959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [211.952519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [211.976945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [211.981537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [211.981705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.981852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.982313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.982901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.983050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.983195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.983800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.983961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [211.984933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [211.987494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.011899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.016853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.016989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.017495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.017665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.017688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.017834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.018329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.018852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.019405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.020515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.021511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.022304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.022501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.022663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.022819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.023429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.023608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.023627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.023774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.024909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.025048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.025763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.026247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.026253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.026387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.050426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.050431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.050554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.050765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.052283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.052419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.054836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.079220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.083517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.083620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.084085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.084224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.084243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.084361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.084876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.085372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.085964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.087098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.088219] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.089016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.089173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.089307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.089435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.090047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.090214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.090230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.090352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.091480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.091596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.092286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.092787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.092792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.092933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.116453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.116458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.116609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.116823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.118341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.118498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.119937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.144321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.149196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.149322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.149808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.150023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.150043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.150163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.150649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.151173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.151755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.152913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.154000] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.154760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.154914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.155048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.155176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.155772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.155941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.155957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.156080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.157184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.157299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.157980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.158453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.158458] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.158586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.183171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.183176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.183290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.183431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.184491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.184627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.186011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.210403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.215444] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.215585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.216061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.216211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.216231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.216360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.216875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.217357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.217948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.219095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.220222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.220993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.221147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.221281] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.221410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.222020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.222195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.222210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.222333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.223461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.223583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.224272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.224772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.224777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.224918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.248452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.248457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.248608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.248822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.250341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.250499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.251885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.276278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.281211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.281319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.281797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.281999] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.282019] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.282138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.282621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.283128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.283702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.284976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.286078] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.286860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.287014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.287149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.287278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.287872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.288040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.288056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.288178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.289281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.289396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.290089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.290582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.290587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.290726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.314205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.314210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.314323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.314464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.315998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.316174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.317492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.341887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.346780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.346906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.347381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.347568] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.347589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.347757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.348233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.348782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.349298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.350508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.351505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.352273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.352450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.352594] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.352724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.353305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.353445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.353461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.353593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.354685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.354799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.355511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.355977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.355982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.356124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.380175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.380180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.380292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.380431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.381668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.381693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.383049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.407397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.412318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.412449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.412946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.413119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.413138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.413261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.413731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.414254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.414812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.416061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.417174] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.417900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.418055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.418189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.418318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.418910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.419081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.419097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.419218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.420324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.420438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.421123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.421607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.421612] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.421753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.445226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.445231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.445343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.445502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.447076] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.447207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.448523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.472908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.477784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.477904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.478366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.478557] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.478576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.478726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.479193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.479726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.480280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.481508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.482512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.483297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.483454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.483595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.483724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.484318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.484457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.484479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.484602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.485708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.485836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.486527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.487011] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.487016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.487153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.512832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.512837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.512962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.513100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.514122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.514266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.515495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.539886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.545269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.545398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.545902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.546066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.546086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.546216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.546711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.547231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.547817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.548963] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.550062] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.550839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.550994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.551128] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.551257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.551852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.552020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.552036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.552157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.553259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.553373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.554068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.554581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.554588] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.554705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.579268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.579273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.579385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.579572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.581126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.581251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.582522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.606912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.611787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.611904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.612358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.612545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.612564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.612709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.613173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.613711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.614260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.615348] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.616455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.617238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.617395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.617537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.617668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.618261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.618401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.618416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.618544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.619640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.619766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.620446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.620943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.620949] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.621086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.644591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.644596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.644711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.644864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.646354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.646501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.647877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.672258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.676514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.676620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.677103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.677246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.677265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.677419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.677926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.678439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.679012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.680215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.681320] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.682093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.682249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.682383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.682524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.683106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.683246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.683261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.683382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.684505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.684656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.685380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.685874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.685879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.685989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.710543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.710548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.710674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.710812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.712301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.712442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.714831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.739228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.744109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.744252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.744759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.744942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.744961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.745104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.745605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.746083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.746703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.747795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.748841] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.749621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.749776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.749909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.750038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.750641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.750780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.750796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.750917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.752011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.752136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.752810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.753301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.753308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.753421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.777448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.777454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.777608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.777796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.779336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.779457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.780905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.805280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.810177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.810284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.810761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.810939] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.810958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.811076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.811563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.812065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.812653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.813777] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.814836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.815605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.815783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.815924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.816054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.816647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.816788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.816803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.816924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.817999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.818113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.818793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.819267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.819272] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.819384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.842879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.842884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.842999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.843140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.844645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.844794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.846178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.870595] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.876621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.876769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.877223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.877403] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.877421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.877619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.878113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.878650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.879200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.880444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.881509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.882287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.882444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.882587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.882717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.883309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.883449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.883464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.883597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.884690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.884820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.885515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.885996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.886001] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.886139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.911251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.911256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.911368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.911552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.913095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.913221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.914497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.938873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.943718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.943829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.944284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.944436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [212.944462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [212.944644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.945148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.945688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.946235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.947353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [212.948511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [212.949285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.949443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.949586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.949716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.950320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.950460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [212.950482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [212.950603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.951701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.951826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.952515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [212.953001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.953006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.953144] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [212.976622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [212.976628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [212.976753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.976891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.978383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [212.978599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [212.979988] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.004348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.009282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.009388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.009893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.010033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.010052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.010172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.010659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.011162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.011736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.012837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.013938] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.014724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.014893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.015027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.015156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.015747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.015887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.015903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.016024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.017119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.017233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.017918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.018391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.018396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.018515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.042043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.042048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.042163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.042304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.043811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.043958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.045373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.069768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.074507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.074630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.075108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.075258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.075277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.075396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.075895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.076413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.076987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.078166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.079211] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.079982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.080135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.080269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.080435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.081055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.081196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.081211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.081333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.082433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.082558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.083241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.083732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.083737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.083860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.107866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.107871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.107994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.108132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.110174] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.110306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.111493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.135881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.140758] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.140866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.141330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.141469] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.141498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.141654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.142132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.142675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.143194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.144299] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.145377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.146142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.146322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.146456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.146595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.147177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.147317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.147333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.147455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.148566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.148680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.149363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.149835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.149840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.149978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.173986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.173991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.174103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.174243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.175883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.175904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.177174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.199721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.204228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.204353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.204878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.205017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.205035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.205155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.205648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.206185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.206759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.207919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.208834] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.209605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.209759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.209902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.210047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.210648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.210789] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.210805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.210927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.212014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.212128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.212823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.213314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.213319] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.213430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.239163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.239168] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.239278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.239416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.240422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.240575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.242005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.266421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.270040] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.270154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.270630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.270797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.270815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.270934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.271397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.271922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.272481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.273510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.274509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.275274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.275428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.275575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.275704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.276297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.276436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.276452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.276582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.277668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.277795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.278502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.278990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.278996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.279154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.304270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.304275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.304389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.304582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.305595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.305767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.307143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.331536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.336400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.336524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.336999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.337148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.337167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.337303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.337778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.338292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.338850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.340004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.341086] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.341721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.341877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.342010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.342140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.342742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.342907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.342923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.343041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.344112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.344223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.345430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.345978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.345983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.346092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.370149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.370154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.370266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.370404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.371421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.371584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.373018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.397427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.402351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.402461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.402952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.403105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.403125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.403257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.403741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.404259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.404827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.406105] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.407207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.407982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.408138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.408272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.408401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.409041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.409208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.409224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.409348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.410435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.410557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.411241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.411757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.411762] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.411873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.438056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.438061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.438173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.438311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.439320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.439435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.440866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.465271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.470151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.470279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.470765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.470950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.470970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.471098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.471589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.472096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.472653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.473782] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.474832] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.475594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.475748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.475881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.476010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.476600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.476740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.476755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.476877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.477948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.478062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.478752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.479239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.479244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.479355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.504511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.504516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.504640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.504778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.505804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.505942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.508490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.532873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.537538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.537662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.538138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.538290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.538310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.538442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.538931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.539446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.540019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.541214] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.542306] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.543044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.543197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.543331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.543460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.544069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.544208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.544223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.544345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.545419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.545543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.546228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.546746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.546753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.546888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.571423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.571427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.571575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.571760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.572769] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.572906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.574177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.598551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.603445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.603570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.604044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.604194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.604214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.604343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.604854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.605341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.605931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.607093] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.608206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.608971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.609124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.609257] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.609387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.609984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.610124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.610139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.610260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.611334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.611448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.612146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.612671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.612678] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.612814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.637390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.637394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.637532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.637710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.638717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.638868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.640176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.664581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.668770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.668888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.669363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.669541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.669574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.669703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.670177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.670717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.671252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.672414] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.673505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.674295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.674448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.674604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.674734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.675316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.675456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.675481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.675603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.676690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.676804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.677484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.678001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.678006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.678116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.703807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.703811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.703933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.704070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.705080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.705190] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.706493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.730834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.735678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.735801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.736276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.736426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.736446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.736668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.737146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.737667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.738222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.739300] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.740371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.741131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.741284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.741417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.741559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.742141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.742279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.742295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.742416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.743507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.743621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.744293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.744807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.744812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.744922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.769512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.769516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.769667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.769804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.771291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.771408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.772798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.797187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.801555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.801658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.802119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.802258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.802277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.802396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.802934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.803436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.804036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.805184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.806209] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.806998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.807152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.807286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.807415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.808038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.808198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.808214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.808347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.809453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.809579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.810226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.810786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.810792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.810933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.834411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.834416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.834542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.834749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.835754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.835932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.837336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.861728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.866556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.866676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.867148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.867297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.867332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.867498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.868022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.868558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.869108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.870352] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.871447] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.872231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.872385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.872531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.872687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.873281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.873420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.873436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.873568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.874681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.874822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.875518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.876010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.876015] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.876126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.900173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.900178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.900288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.900426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.901669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.901691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.903061] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.927382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.932259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.932370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.932867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.933036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.933055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.933178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.933652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.934169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.934739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [213.936004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [213.937087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [213.937875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [213.938029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.938163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.938292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.938887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.939056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [213.939072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [213.939193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.940263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.940378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.941088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [213.941592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.941597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.941735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [213.965187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [213.965192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [213.965304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.965441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.966720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [213.966767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [213.968070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.992450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.997323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.997434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.997931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.998100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [213.998119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [213.998242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.998712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.999234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.999803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.001076] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.002194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.002967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.003122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.003256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.003385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.003983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.004150] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.004166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.004288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.005364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.005484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.006173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.006703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.006708] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.006848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.030924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.030929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.031044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.031184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.033215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.033343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.035838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.060228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.064835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.064998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.065487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.065709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.065728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.065849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.066328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.066851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.067401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.068508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.069511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.070291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.070443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.070599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.070756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.071351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.071500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.071521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.071676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.072754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.072895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.073588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.074091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.074096] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.074208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.098781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.098786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.098910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.099048] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.100059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.100206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.101517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.125837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.131301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.131432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.131949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.132103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.132123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.132243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.132770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.133248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.133816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.135002] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.136084] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.136863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.137017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.137150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.137279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.137896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.138061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.138077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.138195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.139302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.139415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.140113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.140618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.140625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.140739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.163664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.163668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.163781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.163921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.164945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.165113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.166488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.190878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.195736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.195901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.196377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.196581] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.196601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.196734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.197210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.197756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.198274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.199361] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.200461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.201228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.201382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.201537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.201667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.202249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.202389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.202405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.202535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.203602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.203716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.204401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.204904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.204909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.205019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.229643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.229648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.229760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.229898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.231389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.231532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.232911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.257285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.262136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.262263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.262760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.262936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.262955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.263075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.263561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.264063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.264622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.265839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.266933] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.267671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.267825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.267959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.268089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.268680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.268819] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.268834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.268956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.270058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.270172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.270860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.271361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.271366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.271490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.294988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.294993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.295106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.295243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.296740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.296929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.298175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.322547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.327463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.327592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.328070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.328223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.328243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.328375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.328871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.329386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.329959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.331209] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.332305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.333046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.333198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.333332] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.333461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.334076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.334216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.334231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.334353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.335428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.335561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.336259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.336752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.336758] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.336894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.361526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.361531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.361655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.361793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.363282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.363425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.365808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.390215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.396139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.396242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.396742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.396927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.396946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.397065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.397550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.398053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.398614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.399790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.400836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.401597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.401813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.401943] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.402070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.402687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.402824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.402839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.402957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.403647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.403758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.404437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.404943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.404948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.405057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.433483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.433488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.433636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.433774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.434798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.434965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.436334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.460764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.466209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.466340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.466835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.466976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.466995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.467141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.467638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.468124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.468701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.469836] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.470928] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.471670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.471834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.471964] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.472091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.472684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.472853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.472868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.472987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.473673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.473786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.474468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.474973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.474978] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.475090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.498584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.498601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.498713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.498851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.500367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.500537] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.501889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.526258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.531269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.531401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.531916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.532094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.532115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.532244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.532736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.533242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.533799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.534950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.536041] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.536804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.536958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.537091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.537221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.537828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.538029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.538044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.538163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.539238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.539349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.540589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.541122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.541127] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.541236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.568045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.568049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.568158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.568295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.569776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.569893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.572454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.596850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.601535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.601639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.602107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.602250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.602269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.602391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.602866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.603380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.603942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.605199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.606294] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.607052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.607206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.607340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.607484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.608078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.608219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.608234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.608356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.609432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.609557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.610237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.610764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.610769] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.610880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.636553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.636558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.636681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.636818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.638308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.638422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.639843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.664203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.669244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.669368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.669868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.670058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.670078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.670206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.670706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.671204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.671762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.672952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.673830] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.674591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.674745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.674878] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.675007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.675598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.675737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.675752] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.675874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.676950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.677064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.677750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.678248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.678253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.678365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.702941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.702946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.703070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.703208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.704698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.704846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.706143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.730523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.735414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.735520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.735986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.736125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.736142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.736260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.736765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.737249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.737834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.738961] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.740053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.740814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.740967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.741100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.741229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.741822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.741988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.742004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.742127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.743203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.743317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.744026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.744525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.744530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.744642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.769196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.769200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.769311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.769447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.771015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.771128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.772466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.796814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.801549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.801674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.802152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.802305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.802325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.802456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.802942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.803468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.804030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.805212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.806306] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.807044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.807197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.807330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.807460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.808069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.808235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.808253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.808375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.809462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.809584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.810234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.810795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.810800] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.810911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.833827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.833831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.833944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.834084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.835714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.835735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.837073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.861438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.866996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.867141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.867651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.867846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.867866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.867996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.868492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.868994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.869553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.870796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.871832] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.872594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.872747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.872879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.873009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.873601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.873741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.873756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.873877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.874982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.875097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.875792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.876280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.876285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.876397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.900443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.900447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.900600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.900787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.901816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.901932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.903179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.927532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.932362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.932462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.932942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.933085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [214.933103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [214.933225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.933690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.934216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.934774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [214.936003] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [214.937088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [214.937861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [214.938013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.938146] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.938275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.938868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.939008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [214.939024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [214.939145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.940211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.940324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.941030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [214.941523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.941529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.941651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [214.968373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [214.968377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [214.968530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.968684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.970187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [214.970326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [214.971494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.995849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.000499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.000603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.001067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.001207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.001225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.001344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.001817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.002322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.002923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.004051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.005142] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.005876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.006030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.006163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.006292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.006887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.007027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.007043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.007165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.008227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.008341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.009057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.009553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.009558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.009680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.035895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.035900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.036025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.036162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.037681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.037814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.039162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.063519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.068443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.068606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.069090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.069252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.069272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.069400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.069961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.070444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.071021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.072166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.072913] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.073673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.073826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.073959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.074089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.074683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.074824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.074839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.074961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.076056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.076169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.076831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.077350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.077356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.077466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.102559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.102565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.102704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.102841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.103861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.104050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.105389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.129744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.134538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.134660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.135134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.135283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.135303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.135431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.135944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.136431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.137016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.138140] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.139206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.139970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.140123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.140256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.140386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.140996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.141162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.141178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.141299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.142372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.142497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.143162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.143704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.143709] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.143820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.168375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.168380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.168534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.168714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.169710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.169931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.171325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.195681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.201054] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.201187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.201674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.201827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.201846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.201965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.202429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.202957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.203538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.204780] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.205833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.206604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.206758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.206891] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.207021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.207620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.207760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.207776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.207897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.208999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.209114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.209801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.210298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.210303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.210425] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.237153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.237157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.237266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.237403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.238892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.239007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.240384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.264742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.269566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.269687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.270162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.270310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.270330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.270458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.270999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.271492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.272055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.273199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.274296] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.275053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.275207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.275340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.275485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.276068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.276207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.276223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.276344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.277427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.277551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.278230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.278761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.278766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.278877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.304568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.304586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.304696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.304834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.306333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.306516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.307903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.332307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.336547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.336673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.337151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.337303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.337323] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.337455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.337943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.338468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.339031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.340210] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.341304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.342043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.342196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.342330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.342458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.343054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.343194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.343210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.343330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.344395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.344520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.345202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.345728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.345733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.345845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.371535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.371540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.371663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.371801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.373301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.373416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.376186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.400497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.405422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.405546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.406022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.406172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.406192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.406321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.406803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.407308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.407878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.409004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.410087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.410861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.411014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.411147] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.411278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.411882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.412022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.412038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.412159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.413232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.413346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.414056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.414556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.414561] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.414672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.438172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.438176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.438287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.438425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.440067] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.440112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.441380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.465711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.470491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.470613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.471083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.471232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.471251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.471380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.471909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.472408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.472995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.474139] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.475206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.475972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.476126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.476259] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.476388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.476998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.477137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.477153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.477274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.478351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.478464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.479145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.479668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.479673] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.479786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.505417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.505422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.505589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.505778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.507399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.507422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.509824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.534229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.539146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.539250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.539725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.539902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.539921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.540040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.540522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.541041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.541602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.542753] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.543864] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.544645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.544801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.544934] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.545063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.545661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.545802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.545818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.545940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.547045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.547159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.547856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.548344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.548349] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.548460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.571961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.571966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.572080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.572222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.573249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.573368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.575514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.599865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.605100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.605223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.605729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.605944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.605962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.606107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.606598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.607085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.607680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.608810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.609842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.610609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.610763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.610897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.611026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.611627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.611767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.611783] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.611904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.613011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.613125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.613818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.614296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.614301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.614413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.641220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.641225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.641334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.641479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.642546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.642682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.644046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.668384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.672486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.672594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.673069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.673218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.673238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.673367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.673882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.674368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.674950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.676119] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.677207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.678000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.678153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.678286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.678415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.679044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.679181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.679196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.679315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.680413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.680548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.681251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.681815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.681820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.681985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.708237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.708242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.708353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.708534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.709669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.709699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.711066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.735405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.740296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.740426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.740930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.741095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.741116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.741245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.741737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.742243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.742803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.743988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.745089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.745876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.746031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.746164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.746294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.746884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.747024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.747040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.747161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.748236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.748350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.749044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.749534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.749539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.749690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.773218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.773223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.773337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.773486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.774535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.774696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.776069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.798891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.804314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.804421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.804930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.805101] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.805120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.805240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.805725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.806229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.806804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.807961] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.808744] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.809503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.809659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.809792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.809921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.810517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.810657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.810673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.810794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.811848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.811962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.812654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.813143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.813148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.813259] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.838363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.838368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.838506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.838704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.840193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.840320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.842817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.867193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.871515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.871620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.872088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.872231] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.872249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.872372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.872852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.873366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.873928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.875182] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.876207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.876971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.877125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.877258] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.877388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.877994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.878134] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.878149] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.878270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.879334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.879448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.880144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.880629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.880635] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.880772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.906478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.906483] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.906651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.906789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.908303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.908423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.910810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.935162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.940577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.940737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.941195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.941330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [215.941349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [215.941465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.941995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.942499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.943065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [215.944216] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [215.945311] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [215.946043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [215.946196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.946330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.946459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.947068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.947234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [215.947250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [215.947371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.948448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.948570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.949252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [215.949788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.949793] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.949904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [215.973937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [215.973942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [215.974055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.974194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.975207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [215.975350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [215.977810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.002210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.006510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.006618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.007093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.007244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.007263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.007385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.007864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.008388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.008939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.010196] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.011301] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.012047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.012201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.012335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.012464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.013055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.013195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.013211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.013333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.014396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.014529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.015219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.015727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.015732] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.015843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.039885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.039890] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.040025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.040162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.041669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.041817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.043187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.067600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.072580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.072711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.073186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.073335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.073355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.073494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.074014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.074535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.075088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.076331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.077421] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.078184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.078339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.078485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.078614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.079207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.079346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.079362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.079492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.080566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.080680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.081372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.081852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.081857] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.081968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.108222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.108227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.108337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.108483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.109678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.109700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.111087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.135442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.140468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.140609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.141084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.141233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.141253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.141409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.141946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.142433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.143022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.144206] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.145298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.146044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.146198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.146331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.146460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.147065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.147204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.147220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.147341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.148414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.148537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.149232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.149723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.149728] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.149839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.176078] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.176083] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.176195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.176333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.177980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.178001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.179390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.203794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.209268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.209396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.209912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.210093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.210114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.210243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.210738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.211240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.211798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.212984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.214087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.214861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.215014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.215148] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.215277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.215871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.216011] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.216026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.216148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.217223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.217337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.218051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.218553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.218559] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.218670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.244322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.244327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.244439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.244646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.246216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.246335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.248805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.273172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.277514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.277618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.278083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.278221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.278239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.278387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.278901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.279415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.279988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.281211] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.282305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.283043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.283196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.283329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.283458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.284063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.284203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.284218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.284340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.285417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.285542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.286233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.286733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.286738] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.286875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.311455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.311460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.311610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.311826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.313315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.313435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.314843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.339227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.343514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.343617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.344078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.344219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.344238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.344357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.344898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.345401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.345977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.347135] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.347908] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.348672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.348828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.348961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.349090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.349687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.349827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.349843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.349964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.351060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.351174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.351862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.352362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.352367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.352486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.379800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.379805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.379929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.380066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.381585] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.381757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.383133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.407520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.412419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.412541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.413014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.413191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.413211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.413339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.413823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.414337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.414899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.416004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.417099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.417879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.418032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.418166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.418295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.418901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.419081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.419096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.419214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.420319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.420458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.421159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.421670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.421677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.421836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.449167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.449172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.449285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.449424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.450458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.450766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.452170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.476567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.481464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.481592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.482073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.482213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.482231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.482375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.482900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.483391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.483980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.485137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.485912] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.486674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.486827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.486961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.487090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.487698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.487862] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.487877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.487996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.489066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.489178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.490367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.490909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.490914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.491022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.514484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.514489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.514601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.514743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.516247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.516364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.518831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.543236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.547513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.547619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.548090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.548236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.548256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.548374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.548902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.549400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.549977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.551108] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.552208] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.552842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.552996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.553130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.553260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.553938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.554143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.554159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.554278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.555343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.555482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.557007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.557545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.557550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.557684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.582817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.582822] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.582935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.583075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.584100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.584266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.585517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.609916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.614861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.614981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.615433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.615645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.615685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.615872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.616336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.616858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.617422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.618749] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.619839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.620610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.620763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.620897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.621027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.621626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.621766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.621781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.621903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.623008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.623123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.623807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.624278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.624283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.624420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.649041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.649045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.649155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.649292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.650811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.650982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.652349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.676717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.681561] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.681692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.682167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.682316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.682336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.682531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.683032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.683554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.684120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.685225] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.686346] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.687114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.687267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.687400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.687553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.688202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.688339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.688354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.688479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.690064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.690205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.690942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.691963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.691968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.692106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.719429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.719434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.719584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.719801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.721290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.721407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.723808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.748218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.752535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.752638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.753102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.753241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.753259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.753406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.753920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.754407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.754983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.756137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.756909] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.757675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.757830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.757963] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.758092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.758702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.758902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.758917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.759035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.760685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.760796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.762295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.762843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.762848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.762971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.789228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.789232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.789342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.789488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.790562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.790699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.792070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.816424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.822505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.822661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.823133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.823279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.823298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.823424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.823969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.824452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.825026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.826198] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.826992] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.827756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.827909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.828042] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.828182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.828795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.828936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.828952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.829073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.830149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.830263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.830954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.831436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.831441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.831562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.854490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.854494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.854607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.854747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.856252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.856395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.858492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.882875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.888268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.888400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.888920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.889100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.889120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.889248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.889745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.890250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.890818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.892090] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.893205] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.893968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.894123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.894256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.894385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.894979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.895119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.895135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.895257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.896333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.896446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.897137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.897610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.897615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.897768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.921240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.921245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.921360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.921535] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.922579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.922734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.924073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.948459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.953351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.953489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.954028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.954193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [216.954214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [216.954356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.954891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.955377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.955964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [216.957092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [216.958198] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [216.958963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [216.959117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.959250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.959380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.959988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.960128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [216.960143] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [216.960265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.961330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.961443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.962150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [216.962638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.962643] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.962754] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [216.989024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [216.989029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [216.989141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.989278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.990771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [216.990947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [216.992333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.016631] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.021590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.021719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.022193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.022343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.022362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.022558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.023097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.023618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.024184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.025334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.026432] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.027051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.027206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.027340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.027469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.028089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.028251] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.028267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.028385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.029562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.029673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.030662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.031159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.031164] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.031310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.056476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.056481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.056621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.056758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.058261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.058407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.060831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.085237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.089888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.090017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.090527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.090719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.090740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.090869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.091354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.091870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.092419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.093508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.094505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.095265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.095419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.095566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.095696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.096278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.096417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.096432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.096564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.097640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.097754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.098440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.098942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.098947] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.099058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.122561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.122567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.122682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.122822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.124316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.124457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.126831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.151227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.156402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.156580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.157065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.157210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.157229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.157354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.157894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.158396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.158955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.160209] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.161303] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.162040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.162193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.162345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.162488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.163071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.163212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.163228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.163348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.164420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.164543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.165223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.165746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.165750] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.165862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.190416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.190421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.190569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.190785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.192273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.192393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.194813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.219184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.223513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.223617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.224082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.224221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.224239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.224388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.224893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.225381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.225969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.227088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.228195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.228961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.229116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.229250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.229379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.229974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.230114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.230130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.230252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.231326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.231440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.232148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.232629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.232634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.232746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.257878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.257883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.257991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.258127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.259746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.259767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.261132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.285539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.290416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.290541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.291016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.291165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.291185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.291341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.291865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.292353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.292966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.294144] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.295236] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.296005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.296159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.296293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.296423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.297032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.297198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.297215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.297337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.298423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.298549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.299235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.299719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.299724] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.299861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.322863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.322868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.322982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.323123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.324156] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.324331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.325522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.349906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.355320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.355448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.355955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.356141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.356161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.356281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.356769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.357269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.357853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.359006] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.360092] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.360886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.361040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.361173] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.361303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.361893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.362061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.362077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.362199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.363275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.363390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.364090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.364585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.364591] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.364741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.388250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.388255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.388368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.388556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.390116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.390253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.391493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.415818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.420674] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.420803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.421275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.421424] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.421444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.421614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.422140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.422662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.423215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.424321] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.425419] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.426184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.426338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.426484] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.426640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.427234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.427375] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.427390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.427524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.428637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.428779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.429468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.429951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.429958] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.430093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.455229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.455233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.455344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.455504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.457058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.457196] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.458493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.482830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.487681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.487811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.488283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.488433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.488453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.488620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.489148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.489668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.490222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.491345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.492484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.493276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.493429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.493574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.493732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.494326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.494466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.494491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.494642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.495732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.495873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.496568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.497053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.497058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.497169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.521194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.521199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.521311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.521449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.523037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.523151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.524475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.548848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.553766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.553935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.554409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.554597] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.554618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.554797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.555277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.555783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.556337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.557507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.558508] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.559289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.559442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.559597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.559753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.560338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.560493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.560509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.560660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.561716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.561867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.562565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.563055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.563060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.563172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.586649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.586654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.586778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.586914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.588422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.588676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.590051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.614439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.618570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.618680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.619155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.619305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.619324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.619454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.619960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.620455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.621035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.622212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.623340] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.624108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.624262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.624396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.624540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.625162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.625303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.625319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.625443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.626550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.626665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.627348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.627882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.627887] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.628027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.653211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.653217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.653329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.653466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.655163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.655184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.656544] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.680941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.686369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.686518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.687001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.687148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.687167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.687293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.687791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.688295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.688903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.690004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.691088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.691880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.692033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.692166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.692296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.692915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.693107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.693122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.693242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.694308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.694467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.695451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.695934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.695939] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.696047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.722854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.722859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.722971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.723109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.724646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.724792] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.726192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.750544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.754687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.754816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.755288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.755434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.755453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.755637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.756168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.756704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.757256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.758398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.759507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.760270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.760424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.760572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.760732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.761327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.761468] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.761494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.761646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.762714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.762855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.763545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.764045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.764050] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.764162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.788195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.788200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.788322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.788459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.790037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.790200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.791493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.815851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.820710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.820840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.821310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.821459] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.821492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.821687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.822181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.822702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.823256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.824355] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.825299] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.826050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.826203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.826337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.826466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.827065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.827233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.827248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.827371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.828457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.828577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.829270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.829758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.829765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.829902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.854997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.855002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.855113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.855251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.856422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.856445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.857882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.882260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.886513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.886616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.887081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.887220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.887239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.887358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.887863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.888362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.888928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.890231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.891328] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.892096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.892251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.892384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.892529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.893145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.893286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.893302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.893423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.894509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.894624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.895307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.895831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.895838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.895986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.922165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.922170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.922282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.922421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.923954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.924120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.925533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.949944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.954510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.954613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.955079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.955218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [217.955236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [217.955354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.955863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.956360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.956922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [217.958091] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [217.959212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [217.959981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [217.960134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.960267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.960396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.961013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.961179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [217.961195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [217.961317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.962416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.962541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.963216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [217.963739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.963744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.963894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [217.988429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [217.988435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [217.988589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.988802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.989838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [217.989973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [217.991339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.015726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.021082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.021231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.021725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.021936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.021954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.022075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.022569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.023053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.023622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.024800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.025833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.026601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.026763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.026893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.027019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.027606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.027807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.027822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.027941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.029013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.029149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.030332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.030894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.030899] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.031035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.058328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.058333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.058442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.058603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.060176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.060310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.061532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.085937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.090881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.091037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.091537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.091741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.091760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.091881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.092344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.092867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.093420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.094508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.095463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.096302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.096455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.096612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.096765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.097345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.097504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.097522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.097689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.098730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.098885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.099618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.100070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.100077] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.100211] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.130222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.130227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.130338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.130484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.132043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.132182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.133528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.157931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.162827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.162936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.163400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.163553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.163598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.163778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.164242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.164764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.165318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.166510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.167510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.168292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.168446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.168603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.168757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.169338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.169499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.169514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.169675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.170797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.170909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.171858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.172349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.172354] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.172462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.199243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.199248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.199358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.199519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.201061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.201223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.202528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.226932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.231801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.231916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.232390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.232549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.232595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.232760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.233224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.233745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.234299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.235438] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.236505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.237268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.237421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.237577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.237730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.238310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.238447] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.238462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.238589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.239754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.239865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.240874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.241328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.241332] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.241441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.266001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.266006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.266116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.266253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.267755] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.267880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.269160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.293550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.298398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.298503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.298979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.299127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.299147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.299275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.299755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.300262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.300831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.302007] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.303090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.303879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.304031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.304165] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.304294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.304890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.305058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.305073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.305194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.306282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.306396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.307095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.307620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.307625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.307765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.333999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.334003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.334113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.334251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.335281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.335413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.337840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.362218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.366552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.366702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.367163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.367302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.367320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.367439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.367945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.368428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.369004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.370203] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.371338] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.372108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.372261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.372395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.372549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.373162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.373300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.373314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.373433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.374538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.375084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.375816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.376271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.376278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.376410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.402117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.402126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.402331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.402629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.404248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.404414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.407195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.431542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.436535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.436690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.437163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.437311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.437331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.437456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.437971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.438453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.439029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.440218] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.441015] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.441776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.441928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.442060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.442189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.442796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.442960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.442975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.443094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.444180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.444290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.444985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.445460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.445465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.445583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.470180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.470185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.470293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.470430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.471920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.472036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.473372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.497761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.502707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.502837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.503312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.503463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.503494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.503684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.504157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.504681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.505234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.506358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.507463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.508131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.508284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.508418] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.508561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.509144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.509283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.509298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.509419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.510513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.510627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.511305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.511838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.511843] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.511953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.538191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.538195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.538304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.538441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.539926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.540041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.541377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.565773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.570733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.570889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.571361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.571540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.571562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.571733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.572202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.572730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.573282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.574423] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.575506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.576268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.576421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.576577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.576732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.577322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.577457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.577495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.577654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.578773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.578885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.579417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.579873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.579878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.579986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.605652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.605657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.605779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.605915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.607407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.607579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.608963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.633370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.638882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.639037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.639535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.639744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.639764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.639893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.640366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.640893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.641453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.642763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.643833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.644597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.644749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.644882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.645012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.645603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.645743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.645758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.645878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.646983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.647097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.647787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.648290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.648295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.648405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.674674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.674679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.674819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.674984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.676477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.676650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.678020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.702424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.706046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.706153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.706637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.706849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.706868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.706998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.707481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.707985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.708555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.709748] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.710833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.711597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.711758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.711887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.712013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.712602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.712803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.712817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.712935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.714525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.714664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.715347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.715891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.715896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.716047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.740093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.740097] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.740206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.740343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.741904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.742016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.743410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.767856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.772764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.772893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.773367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.773529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.773571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.773742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.774216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.774739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.775291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.776427] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.777507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.778269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.778421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.778567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.778696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.779277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.779417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.779432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.779562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.780638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.780752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.781436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.781939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.781944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.782055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.809359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.809363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.809482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.809669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.811162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.811309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.813527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.837940] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.841514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.841629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.842103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.842252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.842272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.842401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.842914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.843398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.843974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.845142] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.846218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.846996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.847149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.847282] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.847411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.848032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.848182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.848196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.848315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.849407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.849524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.850615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.851093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.851098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.851219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.877983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.877988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.878097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.878234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.879777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.879922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.881144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.905520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.909656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.909781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.910252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.910398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.910418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.910571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.911109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.911632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.912184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.913306] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.914378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.915133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.915286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.915419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.915571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.916181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.916322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.916337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.916458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.917553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.917668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.918345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.918880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.918885] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.919035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [218.946311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.946315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [218.946425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.946637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.948161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [218.948296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [218.949520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.973922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.978891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.979048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.979549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.979754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [218.979773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [218.979894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.980357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.980886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.981433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [218.982508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [218.983510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [218.984292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [218.984445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.984593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.984749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.985332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.985481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [218.985496] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [218.985646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.986734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.986884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.987582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [218.988073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [218.988078] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.988188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.014404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.014409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.014527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.014741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.015767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.015907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.017177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.041611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.046623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.046778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.047250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.047398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.047417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.047554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.048100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.048624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.049177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.050315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.051074] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.051849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.052001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.052134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.052263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.052870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.053034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.053049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.053167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.054288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.054399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.055863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.056416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.056421] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.056537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.083891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.083895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.084017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.084154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.085719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.085836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.087141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.111529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.116524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.116680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.117152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.117300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.117320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.117445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.117959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.118442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.119018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.120215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.121326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.122089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.122241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.122374] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.122528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.123136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.123272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.123287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.123405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.124543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.125076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.126262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.126786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.126791] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.126914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.152067] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.152071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.152180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.152316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.153323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.153439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.154860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.179258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.184744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.184899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.185371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.185545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.185583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.185753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.186226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.186750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.187302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.188444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.189507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.190271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.190425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.190572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.190740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.191323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.191465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.191491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.191643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.192730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.192872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.193565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.194056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.194061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.194172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.218212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.218216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.218326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.218463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.219978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.220107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.221499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.245894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.250839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.250995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.251467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.251658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.251679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.251849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.252309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.252835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.253389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.254508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.255510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.256295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.256447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.256607] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.256760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.257340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.257487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.257503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.257650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.258771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.258884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.259856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.260325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.260330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.260438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.287255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.287260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.287382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.287587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.288664] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.288823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.290175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.314560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.318680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.318821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.319307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.319456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.319487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.319677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.320143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.320682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.321230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.322353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.322999] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.323761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.323914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.324048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.324177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.324772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.324948] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.324964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.325087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.326163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.326277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.326965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.327486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.327491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.327631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.351727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.351732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.351870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.352007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.353509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.353644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.355008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.379372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.383550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.383684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.384155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.384301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.384320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.384445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.384959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.385446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.386022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.387201] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.388000] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.388761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.388913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.389047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.389176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.389771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.389945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.389961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.390083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.391157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.391273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.391960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.392432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.392437] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.392557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.418803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.418807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.418930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.419068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.420556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.420731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.422069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.446445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.450616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.450734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.451196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.451332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.451351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.451467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.451966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.452453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.453029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.454217] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.455342] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.456112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.456265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.456398] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.456552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.457157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.457294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.457309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.457427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.459023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.459135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.459862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.460326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.460333] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.460466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.486169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.486174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.486284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.486421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.487639] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.487661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.489045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.513433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.518951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.519110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.519625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.519810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.519829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.519949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.520439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.520976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.521512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.522694] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.523790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.524510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.524689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.524822] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.524951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.525545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.525713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.525729] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.525852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.526945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.527088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.527778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.528257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.528262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.528374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.552961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.552966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.553089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.553227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.554436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.554458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.555862] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.580207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.584567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.584670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.585131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.585270] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.585288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.585424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.585939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.586424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.587016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.588146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.589222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.589994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.590151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.590284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.590413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.591024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.591191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.591207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.591329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.592415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.592539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.593233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.593729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.593736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.593872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.617939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.617944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.618058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.618210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.619765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.619895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.621197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.645580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.650512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.650642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.651117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.651267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.651287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.651415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.651956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.652442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.653019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.654195] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.655293] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.656046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.656201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.656334] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.656464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.657063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.657230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.657247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.657369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.658453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.658576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.659272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.659774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.659780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.659920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.683953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.683958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.684072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.684212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.685248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.685405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.687838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.712225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.716513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.716618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.717084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.717224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.717242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.717361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.717879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.718387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.718977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.720144] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.721251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.722046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.722200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.722333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.722463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.723084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.723263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.723278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.723397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.724621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.724733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.725694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.726737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.726744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.726894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.750902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.750907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.751021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.751161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.752800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.752821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.754208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.778591] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.783546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.783675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.784150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.784299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.784318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.784447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.784989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.785482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.786036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.787180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.788250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.789038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.789191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.789325] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.789454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.790061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.790235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.790251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.790373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.791467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.791591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.792282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.792788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.792795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.792932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.819171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.819176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.819288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.819426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.820498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.820635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.822033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.846419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.851302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.851432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.851949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.852123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.852143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.852262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.852747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.853251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.853809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.854985] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.856088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.856870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.857025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.857158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.857287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.857893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.858105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.858120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.858239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.859332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.859444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.859811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.860268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.860273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.860398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.885573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.885590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.885701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.885838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.887332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.887502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.888846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.913168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.917867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.918012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.918511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.918705] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.918723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.918844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.919307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.919845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.920394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.921507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.922506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.923321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.923488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.923649] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.923779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.924371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.924521] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.924541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.924688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.925774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.925917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.926600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.927086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.927091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.927203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [219.951250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.951255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [219.951367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.951549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.953116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [219.953253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [219.954524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.978916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.984035] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.984140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.984629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.984815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [219.984834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [219.984954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.985417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.985947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.986530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [219.987687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [219.988782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [219.989510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [219.989686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.989820] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.989949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.990557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.990724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [219.990741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [219.990862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.991937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.992089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.992775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [219.993246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [219.993251] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.993363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.017357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.017362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.017482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.017697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.019215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.019352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.021845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.046208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.051635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.051870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.052581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.053014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.053057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.053367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.054080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.054827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.055507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.057116] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.057992] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.058687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.059068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.059401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.059746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.060511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.060802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.060829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.061042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.062263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.062462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.063250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.063814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.063823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.064081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.092045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.092050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.092161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.092299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.093318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.093481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.094897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.118736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.123001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.123115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.123601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.123807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.123840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.123974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.124453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.124967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.125524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.126699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.127799] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.128511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.128698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.128832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.128961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.129563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.129730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.129746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.129868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.130965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.131106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.131800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.132297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.132303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.132414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.161432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.161437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.161561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.161769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.162780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.162924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.164175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.188553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.193397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.193526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.193997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.194146] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.194166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.194295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.194807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.195297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.195857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.197044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.198145] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.198892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.199047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.199181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.199311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.199908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.200078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.200094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.200216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.201321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.201437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.202137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.202657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.202662] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.202811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.229610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.229628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.229738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.229877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.231382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.231547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.232933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.257285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.262175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.262306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.262792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.263006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.263025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.263146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.263643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.264136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.264694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.265840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.266938] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.267675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.267831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.267965] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.268095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.268697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.268899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.268915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.269034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.270136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.270248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.271420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.271957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.271962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.272071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.296114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.296119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.296231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.296369] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.298018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.298040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.299382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.323769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.329175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.329299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.329810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.329996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.330015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.330134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.330626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.331113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.331708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.332839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.333934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.334482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.334663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.334797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.334927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.335518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.335685] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.335701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.335823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.336919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.337061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.337755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.338245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.338250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.338362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.364031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.364035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.364146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.364284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.365916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.365938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.367176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.391530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.396394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.396520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.396991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.397141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.397161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.397290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.397801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.398300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.398873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.400007] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.401089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.401900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.402054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.402189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.402318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.402927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.403128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.403144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.403263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.404368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.404490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.405172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.405719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.405726] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.405873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.432128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.432148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.432260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.432397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.434017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.434048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.435389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.459735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.464543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.464664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.465139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.465288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.465308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.465437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.465987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.466509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.467047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.468215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.469320] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.470094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.470247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.470380] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.470524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.471144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.471299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.471316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.471437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.472539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.472654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.473340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.473861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.473866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.474007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.502397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.502402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.502522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.502741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.503756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.504000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.505365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.529731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.535029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.535152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.535667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.535853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.535872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.535992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.536455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.536984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.537566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.538723] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.539816] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.540583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.540736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.540870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.540999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.541603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.541779] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.541795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.541918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.543004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.543129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.543822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.544316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.544321] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.544432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.569617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.569622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.569733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.569871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.571374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.571564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.572955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.597313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.602755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.602915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.603390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.603554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.603599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.603769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.604233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.604786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.605322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.606508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.607465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.608249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.608403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.608548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.608705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.609300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.609440] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.609456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.609587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.610704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.610845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.611517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.612019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.612024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.612134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.638961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.638966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.639077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.639215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.640936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.640958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.642355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.666708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.671564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.671687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.672162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.672312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.672331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.672502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.673033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.673550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.674114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.675259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.676376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.677022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.677190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.677320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.677446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.678078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.678240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.678256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.678375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.679515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.679631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.681108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.681671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.681676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.681826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.708590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.708595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.708720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.708858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.710364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.710533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.711920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.736263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.741109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.741342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.742070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.742513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.742556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.742934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.743636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.744357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.745054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.746712] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.747568] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.748259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.748670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.749069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.749324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.750028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.750318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.750345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.750577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.751840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.752085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.752876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.753456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.753464] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.753676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.778409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.778415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.778581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.778793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.779980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.780002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.781395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.805713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.810493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.810615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.811090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.811239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.811259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.811416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.811960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.812443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.813035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.814186] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.815224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.815997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.816151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.816285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.816415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.817025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.817201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.817218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.817339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.818425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.818550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.819234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.819744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.819749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.819884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.845546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.845551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.845689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.845827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.847331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.847493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.848941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.873292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.878222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.878350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.878878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.879047] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.879066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.879185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.879679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.880174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.880733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.881914] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.883001] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.883760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.883915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.884048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.884177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.884773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.884943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.884959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.885081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.886147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.886262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.886952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.887420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.887425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.887546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.912697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.912702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.912826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.912963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.914457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.914604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.915976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.940346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.945359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.945493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.946030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.946169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [220.946188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [220.946335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.946823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.947318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.947887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [220.949094] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [220.950220] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [220.950990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [220.951144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.951277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.951407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.952019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.952185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [220.952201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [220.952323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.953399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.953520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.954205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [220.954722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.954727] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.954851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [220.978919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [220.978924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [220.979048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.979186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.980841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [220.980886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [220.982223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.006571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.010677] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.010797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.011273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.011423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.011442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.011585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.012130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.012653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.013204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.014307] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.015378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.016133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.016287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.016421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.016565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.017174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.017315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.017331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.017453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.018552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.018668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.019350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.019868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.019873] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.020015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.045718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.045723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.045834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.045971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.047452] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.047597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.048995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.073325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.078174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.078300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.078786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.079001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.079024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.079144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.079629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.080133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.080692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.081839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.082935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.083672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.083827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.083960] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.084089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.084678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.084848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.084864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.084986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.086061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.086175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.086863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.087364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.087369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.087489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.111549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.111554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.111679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.111816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.113297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.113436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.115858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.140202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.144874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.145005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.145489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.145696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.145715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.145863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.146328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.146857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.147404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.148510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.149507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.150288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.150443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.150599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.150757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.151341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.151490] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.151506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.151656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.152733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.152885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.153582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.154074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.154079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.154191] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.177688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.177693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.177819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.177956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.179438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.179608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.181014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.205383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.210806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.210953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.211418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.211608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.211648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.211816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.212280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.212803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.213367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.214493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.215511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.216321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.216488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.216658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.216784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.217363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.217538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.217554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.217736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.218840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.219423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.220103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.220660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.220667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.220813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.247124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.247129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.247241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.247378] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.249033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.249078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.250403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.274726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.279564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.279686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.280157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.280306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.280325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.280509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.281022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.281543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.282109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.283256] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.284353] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.285121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.285275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.285409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.285551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.286182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.286323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.286339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.286460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.287558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.287673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.288360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.288862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.288869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.289006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.313064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.313069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.313178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.313316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.314820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.314951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.316339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.340729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.346141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.346269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.346795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.347007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.347026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.347147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.347635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.348135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.348694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.349838] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.350935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.351675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.351838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.351968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.352094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.352698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.352876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.352892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.353011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.354110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.354222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.355211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.356238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.356243] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.356353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.381508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.381513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.381638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.381775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.383284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.383423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.384815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.409182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.413837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.413961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.414436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.414596] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.414640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.414822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.415285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.415808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.416372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.417497] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.418466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.419254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.419408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.419556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.419712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.420306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.420446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.420462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.420592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.421715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.421856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.422551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.423052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.423057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.423167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.448839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.448845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.448969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.449106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.450138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.450274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.451496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.475827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.481155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.481316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.481789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.481994] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.482015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.482163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.482640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.483141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.483713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.484839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.485936] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.486675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.486839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.486970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.487096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.487694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.487866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.487881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.488000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.489073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.489213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.489943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.490431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.490436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.490571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.515778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.515783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.515895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.516033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.517059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.517197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.518528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.542876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.547709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.547832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.548306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.548454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.548484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.548685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.549182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.549704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.550269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.551401] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.552376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.553135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.553289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.553422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.553562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.554179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.554320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.554336] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.554457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.555554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.555669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.556355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.556869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.556874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.556999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.582702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.582707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.582830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.582968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.584449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.584595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.586022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.610376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.614555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.614690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.615174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.615319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.615338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.615464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.616003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.616500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.617063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.618370] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.619357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.620160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.620314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.620448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.620604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.621222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.621361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.621376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.621535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.622704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.622841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.623539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.624024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.624029] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.624138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.650900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.650905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.651030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.651167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.652773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.652795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.654169] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.678524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.683464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.683629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.684112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.684275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.684294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.684423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.684939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.685430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.686000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.687164] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.688139] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.688760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.688913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.689047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.689176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.689772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.689937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.689954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.690091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.691165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.691281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.691965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.692480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.692485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.692625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.716095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.716100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.716211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.716348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.717838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.717973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.719348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.743691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.748534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.748656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.749129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.749278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.749313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.749454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.750001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.750489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.751054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.752192] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.752993] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.753758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.753913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.754046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.754175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.754769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.754938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.754954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.755076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.756171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.756285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.756982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.757481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.757486] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.757624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.783319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.783324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.783434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.783642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.784838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.784893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.786209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.810544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.814633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.814750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.815227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.815377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.815396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.815540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.816086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.816609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.817161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.818297] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.819378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.820133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.820286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.820420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.820563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.821184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.821325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.821342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.821463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.822569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.822685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.823362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.823874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.823881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.824026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.848033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.848038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.848149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.848287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.849776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.849991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.851375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.875734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.880544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.880666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.881140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.881289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.881309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.881466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.881984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.882511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.883065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.884228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.885326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.886096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.886249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.886382] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.886527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.887148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.887290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.887306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.887427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.888514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.888629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.889318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.889819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.889824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.889964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.917259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.917264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.917374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.917538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.918801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.918831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.920195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.944626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.950089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.950281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.950900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.951196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [221.951227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [221.951440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.952038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.952630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.953224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [221.954538] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [221.955253] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [221.955815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [221.956076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.956308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.956552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.957294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.957554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [221.957593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [221.957860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.959026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.959245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.959989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [221.960582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.960590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.960834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [221.984976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [221.984981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [221.985101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.985249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.986256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [221.986395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [221.988828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.013155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.018703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.018806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.019270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.019409] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.019427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.019560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.020094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.020617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.021180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.022327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.023426] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.024196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.024350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.024498] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.024661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.025257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.025397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.025414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.025547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.026662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.026804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.027498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.027997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.028002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.028113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.052686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.052692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.052817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.052954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.054436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.054601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.055986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.080344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.085821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.085946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.086420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.086579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.086625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.086793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.087257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.087808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.088346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.089509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.090507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.091327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.091491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.091662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.091789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.092378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.092573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.092590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.092760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.094347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.094507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.095189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.095742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.095747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.095932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.121601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.121606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.121731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.121869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.123376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.123551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.124938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.149321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.154219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.154346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.154850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.155037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.155056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.155177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.155670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.156165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.156724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.157913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.158998] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.159758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.159912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.160045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.160174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.160768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.160937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.160953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.161077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.162142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.162256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.162941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.163417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.163422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.163545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.189791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.189796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.189920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.190057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.191092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.191229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.193843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.218181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.222871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.222995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.223480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.223691] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.223710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.223857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.224322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.224850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.225397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.226508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.227506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.228319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.228484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.228646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.228776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.229359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.229506] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.229522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.229683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.230768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.230909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.231606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.232094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.232099] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.232211] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.256236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.256240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.256351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.256531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.257693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.257714] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.259078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.283442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.287539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.287649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.288124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.288273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.288293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.288422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.288941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.289422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.290014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.291188] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.292314] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.293090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.293246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.293380] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.293524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.294144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.294284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.294301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.294422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.295529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.295645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.296329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.296834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.296839] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.296981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.321034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.321039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.321149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.321287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.322775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.322930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.324326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.348687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.353542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.353663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.354137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.354286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.354306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.354462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.354980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.355461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.356051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.357279] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.358379] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.359132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.359285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.359419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.359561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.360181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.360321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.360338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.360460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.361556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.361671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.362347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.362879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.362884] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.363023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.388657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.388662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.388800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.388938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.390445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.390665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.392069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.416412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.421280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.421389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.421909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.422092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.422124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.422243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.422734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.423231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.423830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.424988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.426090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.426879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.427033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.427167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.427297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.427931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.428109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.428125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.428245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.429369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.429492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.430478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.430980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.430985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.431094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.458381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.458386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.458540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.458723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.459725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.459871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.461173] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.485534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.490413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.490539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.491014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.491163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.491182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.491311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.491807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.492312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.492870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.494057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.494842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.495609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.495763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.495897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.496027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.496619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.496787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.496804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.496925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.497982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.498107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.498805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.499296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.499301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.499413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <6> [222.518831] [IGT] i915_pm_rpm: finished subtest module-reload, FAIL <6> [222.519122] [IGT] i915_pm_rpm: exiting, ret=98 <7> [222.528947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.528954] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.529097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.529370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [222.529395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [222.529556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.530014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.530149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [222.530164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [222.530283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.530795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.531260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.531869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [222.533003] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [222.533958] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [222.534728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [222.534882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.535054] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.535180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.535772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.535935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [222.535950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [222.536068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.537158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.537269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.538453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [222.539010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.539014] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.539179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [222.567615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [222.567620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [222.567734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.567867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<6> [175.170233] [IGT] i915_pm_rpm: executing

<7> [175.177617] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [175.177996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [175.178013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [175.178284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [175.178463] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.178869] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.179458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.179808] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [175.179880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [175.179892] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [175.180062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.180617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [175.181112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [175.181740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [175.183223] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [175.184207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [175.184830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [175.185051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [175.185185] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.185322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.185937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.186100] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [175.186165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [175.186176] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [175.186295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.187655] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.187775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [175.188456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.188936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.188942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [175.189056] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [175.213672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.213677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [175.213795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.213928] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [175.217558] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [175.217574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [175.217706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.218170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.218306] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [175.218764] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [175.218778] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [175.218901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.219372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [175.219902] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [175.220466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [175.221765] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [175.222835] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [175.223591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [175.223754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [175.223883] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.224009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.224652] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.224821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [175.225247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [175.225260] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [175.225379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.226574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.226703] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [175.227401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.227914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.227918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [175.228040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [175.254234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.254239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [175.254354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.254521] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [175.254842] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [175.254855] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [175.254977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.255448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.255633] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [175.255659] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [175.255670] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [175.255816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.256274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [175.256816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [175.257352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [175.258486] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [175.259428] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [175.260181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [175.260331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [175.260462] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [175.260633] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [175.261243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.261376] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [175.261403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [175.261413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [175.261540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [175.262799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.262921] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [175.263625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [175.264093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.264097] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [175.264204] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [175.290460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [175.290465] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [175.290616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [175.290795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [185.598689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [185.604524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [186.349606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [186.358723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [186.360175] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [186.360610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.361053] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [186.361828] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.362646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [186.362967] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [186.363093] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [186.363695] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.363911] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [186.363988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.364141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [186.364594] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.365153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [186.365291] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [186.365417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [186.366043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.366246] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [186.366322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.366447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [186.366943] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.367534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [186.367701] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [186.367826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [186.368414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.368808] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [186.369074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.369895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.370048] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [186.370067] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [186.370188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.370704] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [186.371232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.371808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [186.373026] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [186.374118] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [186.374876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [186.375137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [186.375272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [186.375402] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [186.376035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.376318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [186.376334] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [186.376457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.377923] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [186.378039] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [186.378754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [186.379847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [186.379851] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.379972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [186.407796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [186.407801] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [186.407917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [186.408214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [186.409239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [186.411480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [186.471072] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [186.578524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [186.583576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [186.584320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [186.584549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [186.584881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [186.585812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [186.586414] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [186.586834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [186.587167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [186.587512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [186.587838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [186.588228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [186.588286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [186.589775] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [186.590757] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [186.591533] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [186.591748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [186.592229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [186.592395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [186.592834] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [186.593031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [186.593038] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [186.593151] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [186.597464] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [186.597469] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [186.597623] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [186.624713] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [186.674404] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [187.068581] [IGT] Reloading i915 w/o display

<7> [187.267891] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [187.268102] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [187.268265] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [187.268412] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [187.268752] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [187.268955] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [187.269745] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [187.269919] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [187.270087] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [187.270254] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [187.270260] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [187.270658] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [187.270682] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [187.270879] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [187.271314] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [187.271612] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [187.271832] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [187.272031] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [187.272230] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [187.277134] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [187.277338] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [187.277579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [187.277798] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [187.278000] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [187.278162] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [187.278358] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [187.278525] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [187.278759] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [187.278914] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [187.279068] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [187.279222] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [187.279374] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [187.279556] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [187.280130] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [187.280347] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [187.280610] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [187.280842] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [187.281055] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [187.281284] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [187.281514] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [187.281732] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [187.281948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [187.282198] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [187.282428] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [187.282701] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [187.282927] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [187.283136] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [187.283342] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [187.283614] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [187.283878] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [187.284090] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [187.284297] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [187.284534] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [187.284760] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [187.284966] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [187.285192] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [187.285405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [187.285629] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [187.285856] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [187.286108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [187.286316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [187.286541] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [187.287195] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [187.287412] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [187.287655] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [187.287926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [187.288138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [187.288348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [187.288585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [187.288839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [187.289054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [187.289268] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [187.289493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [187.289751] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [187.290457] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<7> [187.291003] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<6> [187.291173] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [187.291158] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [187.291309] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [187.291458] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [187.291682] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [187.291864] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [187.292011] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [187.292157] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [187.292304] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [187.292450] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [187.293564] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [187.294540] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [187.294790] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [187.294940] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [187.297485] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [187.297667] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [187.297815] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [187.297960] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [187.298112] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [187.298258] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [187.298403] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [187.298600] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [187.298775] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [187.298921] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [187.299065] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [187.299249] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [187.299453] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [187.299637] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [187.299808] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [187.299941] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [187.300073] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [187.300275] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [187.300731] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [187.300896] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [187.301105] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [187.301294] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [187.301569] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [187.301757] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [187.521484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.532485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.543485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.554486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.565484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.576484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.587485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.598485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.609484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.620484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.631485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.642486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.653484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.664486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.675485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.686485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.697484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.708484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.719485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.730485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.741484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.752484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.763485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.774487] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.785484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.796484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.807485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.818486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.829484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.840484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.851485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.862486] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [187.862666] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [187.862689] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [187.862755] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [187.862953] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [187.863148] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [187.863298] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [187.863723] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [187.863876] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [187.864040] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [187.864355] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [187.864548] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [187.864719] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [187.864937] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present

<7> [187.865085] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [187.865490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [187.865726] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [187.865900] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [187.866047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [187.866194] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [187.866340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [187.866513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [187.866712] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [187.866859] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [187.867005] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [187.867151] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [187.867295] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [187.867463] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [187.867628] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [187.867831] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [187.867971] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [187.868135] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [187.868326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [187.868466] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [187.868656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [187.868842] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [187.868994] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [187.869144] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [187.869292] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [187.869468] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [187.869664] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [187.869844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [187.869985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [187.870125] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [187.870265] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [187.870404] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [187.870594] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [187.870773] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [187.870914] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [187.871054] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [187.871201] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [187.871344] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [187.871526] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [187.871728] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [187.871907] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [187.872055] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [187.872200] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [187.872365] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [187.872574] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [187.872786] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [187.872927] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [187.873092] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [187.873206] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [187.873326] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [187.873464] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [187.874571] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [187.874711] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [187.874846] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [187.885457] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [187.885762] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [187.885912] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [187.886059] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [187.886205] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [187.886369] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [187.886969] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [187.887113] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [187.887218] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [187.887320] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [187.890698] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [187.891440] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [187.891790] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [187.892346] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [187.892748] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [187.892797] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [187.894251] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [187.906321] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [187.908188] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7

<7> [187.909133] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [187.909965] [drm:drm_client_modeset_probe]

<7> [187.909915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [187.910162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [187.910337] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [187.910384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [187.910391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [187.910619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [187.910638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [187.910927] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [187.910949] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [187.910967] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [187.911228] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [187.911255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [187.911274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [187.911292] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [187.911383] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [187.911607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [187.911634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [187.911645] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [187.911650] i915 device info: graphics version: 9

<7> [187.911653] i915 device info: media version: 9

<7> [187.911654] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [187.911656] i915 device info: display version: 9

<7> [187.911659] i915 device info: graphics stepping: F0

<7> [187.911662] i915 device info: media stepping: F0

<7> [187.911664] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [187.911664] i915 device info: display stepping: C0

<7> [187.911668] i915 device info: base die stepping: **

<7> [187.911669] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [187.911672] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [187.911672] i915 device info: gt: 2

<7> [187.911676] i915 device info: memory-regions: 0x21

<7> [187.911678] i915 device info: page-sizes: 0x11000

<7> [187.911681] i915 device info: platform: KABYLAKE

<7> [187.911684] i915 device info: ppgtt-size: 48

<7> [187.911686] i915 device info: ppgtt-type: 2

<7> [187.911689] i915 device info: dma_mask_size: 39

<7> [187.911692] i915 device info: is_mobile: no

<7> [187.911695] i915 device info: is_lp: no

<7> [187.911697] i915 device info: require_force_probe: no

<7> [187.911700] i915 device info: is_dgfx: no

<7> [187.911703] i915 device info: has_64bit_reloc: yes

<7> [187.911705] i915 device info: has_64k_pages: no

<7> [187.911708] i915 device info: gpu_reset_clobbers_display: no

<7> [187.911711] i915 device info: has_reset_engine: yes

<7> [187.911713] i915 device info: has_3d_pipeline: yes

<7> [187.911716] i915 device info: has_4tile: no

<7> [187.911719] i915 device info: has_flat_ccs: no

<7> [187.911721] i915 device info: has_global_mocs: no

<7> [187.911724] i915 device info: has_gmd_id: no

<7> [187.911726] i915 device info: has_gt_uc: yes

<7> [187.911729] i915 device info: has_heci_pxp: no

<7> [187.911732] i915 device info: has_heci_gscfi: no

<7> [187.911734] i915 device info: has_guc_deprivilege: no

<7> [187.911737] i915 device info: has_l3_ccs_read: no

<7> [187.911740] i915 device info: has_l3_dpf: no

<7> [187.911742] i915 device info: has_llc: yes

<7> [187.911745] i915 device info: has_logical_ring_contexts: yes

<7> [187.911748] i915 device info: has_logical_ring_elsq: no

<7> [187.911750] i915 device info: has_media_ratio_mode: no

<7> [187.911753] i915 device info: has_mslice_steering: no

<7> [187.911755] i915 device info: has_oa_bpc_reporting: no

<7> [187.911758] i915 device info: has_oa_slice_contrib_limits: no

<7> [187.911760] i915 device info: has_oam: no

<7> [187.911763] i915 device info: has_one_eu_per_fuse_bit: no

<7> [187.911766] i915 device info: has_pxp: no

<7> [187.911768] i915 device info: has_rc6: yes

<7> [187.911771] i915 device info: has_rc6p: no

<7> [187.911773] i915 device info: has_rps: yes

<7> [187.911776] i915 device info: has_runtime_pm: yes

<7> [187.911779] i915 device info: has_snoop: no

<7> [187.911781] i915 device info: has_coherent_ggtt: yes

<7> [187.911781] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [187.911784] i915 device info: tuning_thread_rr_after_dep: no

<7> [187.911787] i915 device info: unfenced_needs_alignment: no

<7> [187.911790] i915 device info: hws_needs_physical: no

<7> [187.911792] i915 device info: has_pooled_eu: no

<7> [187.911795] i915 device info: cursor_needs_physical: no

<7> [187.911797] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [187.911798] i915 device info: has_cdclk_crawl: no

<7> [187.911801] i915 device info: has_cdclk_squash: no

<7> [187.911804] i915 device info: has_ddi: yes

<7> [187.911806] i915 device info: has_dp_mst: yes

<7> [187.911809] i915 device info: has_dsb: no

<7> [187.911812] i915 device info: has_fpga_dbg: yes

<7> [187.911814] i915 device info: has_gmch: no

<7> [187.911817] i915 device info: has_hotplug: yes

<7> [187.911820] i915 device info: has_hti: no

<7> [187.911822] i915 device info: has_ipc: yes

<7> [187.911825] i915 device info: has_overlay: no

<7> [187.911827] i915 device info: has_psr: yes

<7> [187.911830] i915 device info: has_psr_hw_tracking: yes

<7> [187.911833] i915 device info: overlay_needs_physical: no

<7> [187.911835] i915 device info: supports_tv: no

<7> [187.911828] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [187.911838] i915 device info: has_hdcp: yes

<7> [187.911840] i915 device info: has_dmc: yes

<7> [187.911842] i915 device info: has_dsc: no

<7> [187.911846] i915 device info: rawclk rate: 24000 kHz

<7> [187.911848] i915 device info: iommu: enabled

<7> [187.911851] i915 device info: available engines: 40403

<7> [187.911854] i915 device info: slice total: 1, mask=0001

<6> [187.911857] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [187.911857] i915 device info: subslice total: 3

<7> [187.911861] i915 device info: slice0: 3 subslices, mask=00000007

<7> [187.911864] i915 device info: slice1: 0 subslices, mask=00000000

<7> [187.911867] i915 device info: slice2: 0 subslices, mask=00000000

<7> [187.911870] i915 device info: EU total: 24

<7> [187.911872] i915 device info: EU per subslice: 8

<7> [187.911875] i915 device info: has slice power gating: no

<7> [187.911877] i915 device info: has subslice power gating: no

<7> [187.911880] i915 device info: has EU power gating: yes

<6> [187.911883] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [187.911886] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [187.911889] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [187.913783] [drm:drm_client_modeset_probe]

<7> [187.914065] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [187.914119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [187.914312] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [187.914333] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [187.914351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [187.914567] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [187.914588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [187.914606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [187.914773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [187.914792] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [187.914801] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [187.914806] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [187.914810] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [187.914918] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [187.914937] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [187.914969] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [187.914997] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [187.918322] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [188.070889] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [188.071304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [188.071538] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [188.071756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [188.072395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [198.961700] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [198.968319] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [198.992926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [198.999587] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [198.999850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [198.999888] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [198.999934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [199.000117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [199.000145] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [199.000369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [199.000959] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [199.006613] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [199.215655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [199.223771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [199.224110] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [199.224151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [199.224460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [199.224534] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [199.224958] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [199.224888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [199.225765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [199.226117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [199.226764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [199.227409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [199.227966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [199.228293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [199.228663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [199.228984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [199.254700] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [199.291768] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [199.662524] [IGT] Reloading i915 as normal

<7> [199.812202] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [199.812417] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=0 (guc:no submission:no huc:no slpc:no)

<7> [199.812616] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [199.812803] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [199.813046] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [199.813180] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [199.813882] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [199.813998] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [199.814106] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 32M

<6> [199.814211] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [199.814215] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [199.814428] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [199.814442] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 8c700047

<7> [199.814619] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 32768K, usable: 31744K

<7> [199.814942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x71f90018

<7> [199.815101] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [199.815240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [199.815376] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [199.815579] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [199.819518] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [199.819697] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [199.819844] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [199.819990] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [199.820137] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [199.820249] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [199.820363] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [199.820499] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [199.820599] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [199.820697] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [199.820794] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [199.820890] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [199.820986] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [199.821104] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [199.821665] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [199.821861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 196

<7> [199.822023] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [199.822182] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [199.822341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [199.822550] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [199.822735] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 280, min size 812)

<7> [199.822884] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 24, min size 34)

<7> [199.823032] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [199.823181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [199.823329] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [199.823508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [199.823670] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [199.823815] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [199.823960] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x78c6

<7> [199.824108] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [199.824271] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [199.824418] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [199.824604] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [199.824785] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0

<7> [199.824948] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [199.825147] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 3

<7> [199.825314] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [199.825460] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 3

<7> [199.825650] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [199.825847] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [199.826032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [199.826194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [199.826341] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Sanitizing cdclk programmed by pre-os

<7> [199.827031] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [199.827180] i915 0000:00:02.0: [drm:skl_set_cdclk [i915]] Max dotclock rate: 675000 kHz

<7> [199.827340] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [199.827568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [199.827713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [199.827858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [199.828016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [199.828202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [199.828349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [199.828520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [199.828683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [199.828894] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/kbl_dmc_ver1_04.bin

<7> [199.829950] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1

<6> [199.830178] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)

<7> [199.830432] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [199.830646] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [199.830792] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [199.830930] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [199.831068] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [199.831204] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [199.831341] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [199.831486] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [199.831666] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [199.831803] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [199.832919] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [199.834309] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [199.834624] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI A/PHY A] using AUX A (VBT)

<7> [199.834837] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:94:DDI A/PHY A]

<7> [199.837539] i915 0000:00:02.0: [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)

<7> [199.837706] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2

<7> [199.837855] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2

<7> [199.838000] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is static

<7> [199.838151] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [199.838297] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300

<7> [199.838441] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002

<7> [199.838634] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName

<7> [199.838779] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz

<7> [199.838924] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0

<7> [199.839069] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS State Enabled:1

<7> [199.839252] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:94:DDI A/PHY A] initial power sequencer: PPS 0

<7> [199.839455] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 2000 t8 1 t9 1 t10 500 t11_t12 6000

<7> [199.839695] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000

<7> [199.839845] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100

<7> [199.839977] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600

<7> [199.840108] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200

<7> [199.840347] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06

<7> [199.840712] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD on

<7> [199.840872] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 wait for panel power cycle

<7> [199.841087] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [199.841244] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete

<7> [199.841441] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000008

<7> [199.841637] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [200.057484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.068483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.079484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.090484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.101483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.112483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.123483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.134484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.145483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.156483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.167485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.178483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.189483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.200484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.211484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.222483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.233484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.244483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.255483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.266484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.277482] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.288483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.299485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.310483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.321483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.332484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.343484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.354483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.365485] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.376483] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.387484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.398484] i915 0000:00:02.0: [drm:intel_dp_aux_xfer [i915]] AUX A/DDI A/PHY A: timeout (status 0x7d40023f)

<7> [200.398662] i915 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110

<6> [200.398684] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] failed to retrieve link info, disabling eDP

<7> [200.398747] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 turning VDD off

<7> [200.398947] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:94:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000

<7> [200.399138] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (VBT)

<7> [200.399288] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:94:DDI B/PHY B]

<7> [200.399675] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.399827] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:106:DDI C/PHY C] using AUX C (VBT)

<7> [200.400006] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:106:DDI C/PHY C]

<7> [200.400266] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [200.400409] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:106:DDI C/PHY C]

<7> [200.400595] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:106:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [200.400841] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port D is not present

<7> [200.400989] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port E is not present

<7> [200.401364] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [200.401582] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [200.401778] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [200.401925] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [200.402071] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [200.402216] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [200.402361] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [200.402543] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [200.402739] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [200.402882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [200.403061] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [200.403205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [200.403350] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [200.403515] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:96:DP-MST A] hw state readout: disabled, pipe A

<7> [200.403673] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:97:DP-MST B] hw state readout: disabled, pipe B

<7> [200.403847] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:98:DP-MST C] hw state readout: disabled, pipe C

<7> [200.404024] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [200.404163] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:108:DP-MST A] hw state readout: disabled, pipe A

<7> [200.404301] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST B] hw state readout: disabled, pipe B

<7> [200.404440] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST C] hw state readout: disabled, pipe C

<7> [200.404637] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [200.404788] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [200.404936] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [200.405083] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [200.405257] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:DP-1] hw state readout: disabled

<7> [200.405408] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:107:DP-2] hw state readout: disabled

<7> [200.405609] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:113:HDMI-A-1] hw state readout: disabled

<7> [200.405750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [200.405890] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [200.406029] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [200.406168] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [200.406316] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [200.406458] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [200.406648] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [200.406787] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [200.406934] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [200.407110] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [200.407249] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [200.407388] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [200.407624] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [200.407789] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [200.408005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [200.408149] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [200.408294] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.408435] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.408616] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [200.408780] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [200.408892] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, 100000000]

<7> [200.409013] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [200.409149] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [200.410109] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [200.410248] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [200.410381] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 14 context workarounds on rcs'0

<7> [200.420550] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [200.420807] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [200.420957] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [200.421103] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [200.421249] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [200.421411] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [200.421972] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [200.422086] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [200.422219] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [200.422322] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [200.424665] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1

<7> [200.425695] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:DP-1] generating connector hotplug event

<7> [200.426199] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX C/DDI C/PHY C bus for card0-DP-2

<7> [200.427011] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:107:DP-2] generating connector hotplug event

<7> [200.427546] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:113:HDMI-A-1] generating connector hotplug event

<6> [200.427613] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [200.429863] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 3 outputs detected

<6> [200.442397] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [200.444259] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8

<7> [200.444954] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [200.445725] [drm:drm_client_modeset_probe]

<7> [200.445674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [200.445942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [200.446050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [200.446102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.446160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [200.446375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [200.447070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.447394] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [200.447464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.447619] i915 device info: pciid=0x591d rev=0x04 platform=KABYLAKE (subplatform=0x0) gen=9

<7> [200.447623] i915 device info: graphics version: 9

<7> [200.447626] i915 device info: media version: 9

<7> [200.447628] i915 device info: display version: 9

<7> [200.447630] i915 device info: graphics stepping: F0

<7> [200.447632] i915 device info: media stepping: F0

<7> [200.447634] i915 device info: display stepping: C0

<7> [200.447636] i915 device info: base die stepping: **

<7> [200.447638] i915 device info: gt: 2

<7> [200.447641] i915 device info: memory-regions: 0x21

<7> [200.447643] i915 device info: page-sizes: 0x11000

<7> [200.447645] i915 device info: platform: KABYLAKE

<7> [200.447647] i915 device info: ppgtt-size: 48

<7> [200.447649] i915 device info: ppgtt-type: 2

<7> [200.447651] i915 device info: dma_mask_size: 39

<7> [200.447653] i915 device info: is_mobile: no

<7> [200.447655] i915 device info: is_lp: no

<7> [200.447657] i915 device info: require_force_probe: no

<7> [200.447659] i915 device info: is_dgfx: no

<7> [200.447662] i915 device info: has_64bit_reloc: yes

<7> [200.447664] i915 device info: has_64k_pages: no

<7> [200.447666] i915 device info: gpu_reset_clobbers_display: no

<7> [200.447668] i915 device info: has_reset_engine: yes

<7> [200.447670] i915 device info: has_3d_pipeline: yes

<7> [200.447672] i915 device info: has_4tile: no

<7> [200.447674] i915 device info: has_flat_ccs: no

<7> [200.447676] i915 device info: has_global_mocs: no

<7> [200.447689] i915 device info: has_gmd_id: no

<7> [200.447691] i915 device info: has_gt_uc: yes

<7> [200.447694] i915 device info: has_heci_pxp: no

<7> [200.447696] i915 device info: has_heci_gscfi: no

<7> [200.447699] i915 device info: has_guc_deprivilege: no

<7> [200.447702] i915 device info: has_l3_ccs_read: no

<7> [200.447704] i915 device info: has_l3_dpf: no

<7> [200.447707] i915 device info: has_llc: yes

<7> [200.447709] i915 device info: has_logical_ring_contexts: yes

<7> [200.447712] i915 device info: has_logical_ring_elsq: no

<7> [200.447714] i915 device info: has_media_ratio_mode: no

<7> [200.447717] i915 device info: has_mslice_steering: no

<7> [200.447719] i915 device info: has_oa_bpc_reporting: no

<7> [200.447722] i915 device info: has_oa_slice_contrib_limits: no

<7> [200.447725] i915 device info: has_oam: no

<7> [200.447727] i915 device info: has_one_eu_per_fuse_bit: no

<7> [200.447730] i915 device info: has_pxp: no

<7> [200.447732] i915 device info: has_rc6: yes

<7> [200.447735] i915 device info: has_rc6p: no

<7> [200.447737] i915 device info: has_rps: yes

<7> [200.447740] i915 device info: has_runtime_pm: yes

<7> [200.447742] i915 device info: has_snoop: no

<7> [200.447745] i915 device info: has_coherent_ggtt: yes

<7> [200.447748] i915 device info: tuning_thread_rr_after_dep: no

<7> [200.447750] i915 device info: unfenced_needs_alignment: no

<7> [200.447752] i915 device info: hws_needs_physical: no

<7> [200.447755] i915 device info: has_pooled_eu: no

<7> [200.447757] i915 device info: cursor_needs_physical: no

<7> [200.447760] i915 device info: has_cdclk_crawl: no

<7> [200.447762] i915 device info: has_cdclk_squash: no

<7> [200.447765] i915 device info: has_ddi: yes

<7> [200.447767] i915 device info: has_dp_mst: yes

<7> [200.447770] i915 device info: has_dsb: no

<7> [200.447772] i915 device info: has_fpga_dbg: yes

<7> [200.447775] i915 device info: has_gmch: no

<7> [200.447777] i915 device info: has_hotplug: yes

<7> [200.447780] i915 device info: has_hti: no

<7> [200.447782] i915 device info: has_ipc: yes

<7> [200.447785] i915 device info: has_overlay: no

<7> [200.447787] i915 device info: has_psr: yes

<7> [200.447789] i915 device info: has_psr_hw_tracking: yes

<7> [200.447792] i915 device info: overlay_needs_physical: no

<7> [200.447794] i915 device info: supports_tv: no

<7> [200.447797] i915 device info: has_hdcp: yes

<7> [200.447799] i915 device info: has_dmc: yes

<7> [200.447802] i915 device info: has_dsc: no

<7> [200.447804] i915 device info: rawclk rate: 24000 kHz

<7> [200.447807] i915 device info: iommu: enabled

<7> [200.447810] i915 device info: available engines: 40403

<7> [200.447813] i915 device info: slice total: 1, mask=0001

<7> [200.447815] i915 device info: subslice total: 3

<7> [200.447818] i915 device info: slice0: 3 subslices, mask=00000007

<7> [200.447821] i915 device info: slice1: 0 subslices, mask=00000000

<7> [200.447823] i915 device info: slice2: 0 subslices, mask=00000000

<7> [200.447826] i915 device info: EU total: 24

<7> [200.447828] i915 device info: EU per subslice: 8

<7> [200.447831] i915 device info: has slice power gating: no

<7> [200.447833] i915 device info: has subslice power gating: no

<7> [200.447729] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.447836] i915 device info: has EU power gating: yes

<6> [200.447839] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [200.447841] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [200.447843] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [200.447954] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.448673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.449276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] status updated from unknown to disconnected

<7> [200.449577] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.449601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.449620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.449898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.450549] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.451134] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.451715] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.453488] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.454683] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.455375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.455584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.455750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.455898] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.456553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.456727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] status updated from unknown to disconnected

<7> [200.456748] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.456761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.456772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.456921] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.458888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.459107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.459878] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.460391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.460396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.460582] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.493407] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.493417] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.493688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.493956] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] status updated from unknown to disconnected

<7> [200.493987] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [200.494004] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.494018] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.494023] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [200.494027] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [200.494198] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.494222] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.494307] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [200.494335] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.495290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.495456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.496077] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.496675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.496843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.496991] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.497644] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.497977] [drm:drm_client_modeset_probe]

<7> [200.498262] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [200.498316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.498651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.499378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.499621] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.499644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.499663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.499850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.500403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.500973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.501560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.503258] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.503259] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [200.503942] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.504634] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.504990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.505189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.505382] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.506054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.506261] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.506287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.506307] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.506504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.508029] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.508207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.509499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.510012] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.510020] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.510188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.538146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.538154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.538326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.538561] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [200.538596] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.538605] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.538609] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [200.538613] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [200.538698] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.538717] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.538755] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [200.538765] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<6> [200.538783] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.538783] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.538881] [drm:drm_client_modeset_probe]

<7> [200.539069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.539791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.539933] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.539947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [200.539969] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.540154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.540696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.540903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.540924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.540943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.541135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.541701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.542190] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.542834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.544100] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.545213] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.546013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.546168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.546302] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.546432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.547053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.547203] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.547218] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.547229] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.547349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.548459] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.548606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.549293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.549815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.549820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.549928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.578914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.578919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.579032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.579166] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [200.579180] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [200.579183] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [200.579185] [drm:drm_client_modeset_probe] connector 107 enabled? no

<7> [200.579187] [drm:drm_client_modeset_probe] connector 113 enabled? no

<7> [200.579221] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [200.579229] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [200.579380] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [200.579394] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [200.579461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.579502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.579682] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.580172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.580743] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.581272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.582771] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.583833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.584488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.584753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.584884] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.585010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.585611] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.585758] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.585828] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.585839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.585958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.587374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.587512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.588699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.589225] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.589229] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.589337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.616081] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.616085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.616198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.616331] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [200.618823] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [200.618839] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.618965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.619425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.619602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.620062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.620075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.620194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.620676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.621183] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.621774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.622914] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.623996] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.624755] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.624904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.625036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.625164] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.625776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.625910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.626334] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.626346] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.626464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.627617] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.627727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.628408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.628929] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.628933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.629070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.656905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.656909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.657034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.657165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [200.657460] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1]

<7> [200.657480] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [200.657635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.658090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.658251] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected

<7> [200.658276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2]

<7> [200.658286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [200.658403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.658934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [200.659425] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [200.660024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [200.661133] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [200.661899] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [200.662649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [200.662808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [200.662936] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [200.663060] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [200.663661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.663807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected

<7> [200.663833] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1]

<7> [200.663844] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [200.663960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [200.665021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.665141] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [200.665892] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [200.666339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.666343] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [200.666502] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [200.693260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [200.693264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [200.693375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [200.693545] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected

<7> [211.734684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.739533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.764065] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.772378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [211.772983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.773282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.773690] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [211.774374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.775021] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [211.775538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.775800] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.776412] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.777068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.777300] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.777544] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.778200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.778372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.779904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [211.780073] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [211.781947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.806511] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.811600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.811813] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.812331] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.812933] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.813509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [211.815313] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [211.816311] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [211.817012] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [211.817271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.817406] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.817561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.818179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.818410] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [211.818429] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [211.818588] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.819970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [211.820124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.820810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [211.821321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [211.821327] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.821464] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [211.845537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [211.845542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [211.845669] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.845953] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.846984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [211.848370] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.872770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.878641] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.878809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.878957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.879409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.879986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.880175] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.880323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.880979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.881143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.881665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [211.882091] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [211.885317] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.909768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.914577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.914730] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.915250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.915451] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [211.915506] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [211.915691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.916195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.916716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.917281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [211.918520] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [211.919533] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [211.920220] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [211.920431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.920632] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.920812] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.921454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.921661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [211.921687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [211.921856] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.923002] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [211.923160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.923886] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [211.924381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [211.924387] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.924552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [211.948647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [211.948654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [211.948796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.948954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.949959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [211.952519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [211.976945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [211.981537] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [211.981705] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.981852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.982313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.982901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.983050] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.983195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.983800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.983961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [211.984933] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [211.987494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.011899] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.016853] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.016989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.017495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.017665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.017688] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.017834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.018329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.018852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.019405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.020515] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.021511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.022304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.022501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.022663] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.022819] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.023429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.023608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.023627] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.023774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.024909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.025048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.025763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.026247] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.026253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.026387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.050426] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.050431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.050554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.050765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.052283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.052419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.054836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.079220] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.083517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.083620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.084085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.084224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.084243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.084361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.084876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.085372] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.085964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.087098] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.088219] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.089016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.089173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.089307] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.089435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.090047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.090214] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.090230] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.090352] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.091480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.091596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.092286] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.092787] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.092792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.092933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.116453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.116458] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.116609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.116823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.118341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.118498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.119937] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.144321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.149196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.149322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.149808] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.150023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.150043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.150163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.150649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.151173] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.151755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.152913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.154000] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.154760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.154914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.155048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.155176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.155772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.155941] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.155957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.156080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.157184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.157299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.157980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.158453] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.158458] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.158586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.183171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.183176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.183290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.183431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.184491] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.184627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.186011] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.210403] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.215444] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.215585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.216061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.216211] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.216231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.216360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.216875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.217357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.217948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.219095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.220222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.220993] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.221147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.221281] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.221410] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.222020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.222195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.222210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.222333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.223461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.223583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.224272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.224772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.224777] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.224918] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.248452] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.248457] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.248608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.248822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.250341] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.250499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.251885] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.276278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.281211] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.281319] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.281797] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.281999] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.282019] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.282138] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.282621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.283128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.283702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.284976] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.286078] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.286860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.287014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.287149] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.287278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.287872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.288040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.288056] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.288178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.289281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.289396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.290089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.290582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.290587] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.290726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.314205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.314210] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.314323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.314464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.315998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.316174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.317492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.341887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.346780] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.346906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.347381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.347568] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.347589] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.347757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.348233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.348782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.349298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.350508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.351505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.352273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.352450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.352594] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.352724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.353305] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.353445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.353461] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.353593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.354685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.354799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.355511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.355977] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.355982] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.356124] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.380175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.380180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.380292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.380431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.381668] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.381693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.383049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.407397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.412318] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.412449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.412946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.413119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.413138] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.413261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.413731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.414254] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.414812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.416061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.417174] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.417900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.418055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.418189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.418318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.418910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.419081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.419097] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.419218] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.420324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.420438] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.421123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.421607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.421612] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.421753] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.445226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.445231] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.445343] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.445502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.447076] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.447207] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.448523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.472908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.477784] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.477904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.478366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.478557] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.478576] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.478726] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.479193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.479726] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.480280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.481508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.482512] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.483297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.483454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.483595] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.483724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.484318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.484457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.484479] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.484602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.485708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.485836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.486527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.487011] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.487016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.487153] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.512832] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.512837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.512962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.513100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.514122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.514266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.515495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.539886] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.545269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.545398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.545902] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.546066] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.546086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.546216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.546711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.547231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.547817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.548963] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.550062] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.550839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.550994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.551128] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.551257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.551852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.552020] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.552036] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.552157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.553259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.553373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.554068] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.554581] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.554588] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.554705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.579268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.579273] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.579385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.579572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.581126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.581251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.582522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.606912] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.611787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.611904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.612358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.612545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.612564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.612709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.613173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.613711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.614260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.615348] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.616455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.617238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.617395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.617537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.617668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.618261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.618401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.618416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.618544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.619640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.619766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.620446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.620943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.620949] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.621086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.644591] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.644596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.644711] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.644864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.646354] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.646501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.647877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.672258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.676514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.676620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.677103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.677246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.677265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.677419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.677926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.678439] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.679012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.680215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.681320] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.682093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.682249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.682383] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.682524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.683106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.683246] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.683261] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.683382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.684505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.684656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.685380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.685874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.685879] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.685989] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.710543] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.710548] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.710674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.710812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.712301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.712442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.714831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.739228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.744109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.744252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.744759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.744942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.744961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.745104] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.745605] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.746083] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.746703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.747795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.748841] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.749621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.749776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.749909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.750038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.750641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.750780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.750796] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.750917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.752011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.752136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.752810] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.753301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.753308] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.753421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.777448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.777454] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.777608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.777796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.779336] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.779457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.780905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.805280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.810177] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.810284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.810761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.810939] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.810958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.811076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.811563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.812065] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.812653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.813777] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.814836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.815605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.815783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.815924] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.816054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.816647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.816788] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.816803] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.816924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.817999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.818113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.818793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.819267] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.819272] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.819384] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.842879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.842884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.842999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.843140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.844645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.844794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.846178] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.870595] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.876621] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.876769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.877223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.877403] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.877421] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.877619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.878113] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.878650] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.879200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.880444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.881509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.882287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.882444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.882587] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.882717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.883309] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.883449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.883464] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.883597] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.884690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.884820] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.885515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.885996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.886001] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.886139] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.911251] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.911256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.911368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.911552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.913095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.913221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.914497] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.938873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.943718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.943829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.944284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.944436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [212.944462] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [212.944644] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.945148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.945688] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.946235] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.947353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [212.948511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [212.949285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.949443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.949586] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.949716] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.950320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.950460] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [212.950482] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [212.950603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.951701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.951826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.952515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [212.953001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.953006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.953144] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [212.976622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [212.976628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [212.976753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.976891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.978383] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [212.978599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [212.979988] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.004348] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.009282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.009388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.009893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.010033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.010052] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.010172] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.010659] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.011162] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.011736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.012837] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.013938] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.014724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.014893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.015027] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.015156] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.015747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.015887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.015903] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.016024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.017119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.017233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.017918] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.018391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.018396] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.018515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.042043] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.042048] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.042163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.042304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.043811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.043958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.045373] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.069768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.074507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.074630] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.075108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.075258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.075277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.075396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.075895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.076413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.076987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.078166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.079211] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.079982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.080135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.080269] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.080435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.081055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.081196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.081211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.081333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.082433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.082558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.083241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.083732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.083737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.083860] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.107866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.107871] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.107994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.108132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.110174] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.110306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.111493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.135881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.140758] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.140866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.141330] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.141469] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.141498] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.141654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.142132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.142675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.143194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.144299] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.145377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.146142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.146322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.146456] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.146595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.147177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.147317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.147333] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.147455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.148566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.148680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.149363] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.149835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.149840] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.149978] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.173986] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.173991] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.174103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.174243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.175883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.175904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.177174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.199721] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.204228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.204353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.204878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.205017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.205035] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.205155] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.205648] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.206185] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.206759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.207919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.208834] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.209605] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.209759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.209902] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.210047] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.210648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.210789] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.210805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.210927] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.212014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.212128] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.212823] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.213314] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.213319] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.213430] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.239163] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.239168] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.239278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.239416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.240422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.240575] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.242005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.266421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.270040] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.270154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.270630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.270797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.270815] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.270934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.271397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.271922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.272481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.273510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.274509] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.275274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.275428] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.275575] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.275704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.276297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.276436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.276452] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.276582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.277668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.277795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.278502] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.278990] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.278996] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.279154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.304270] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.304275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.304389] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.304582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.305595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.305767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.307143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.331536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.336400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.336524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.336999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.337148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.337167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.337303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.337778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.338292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.338850] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.340004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.341086] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.341721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.341877] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.342010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.342140] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.342742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.342907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.342923] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.343041] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.344112] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.344223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.345430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.345978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.345983] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.346092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.370149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.370154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.370266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.370404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.371421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.371584] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.373018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.397427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.402351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.402461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.402952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.403105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.403125] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.403257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.403741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.404259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.404827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.406105] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.407207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.407982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.408138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.408272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.408401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.409041] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.409208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.409224] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.409348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.410435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.410557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.411241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.411757] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.411762] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.411873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.438056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.438061] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.438173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.438311] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.439320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.439435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.440866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.465271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.470151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.470279] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.470765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.470950] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.470970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.471098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.471589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.472096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.472653] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.473782] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.474832] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.475594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.475748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.475881] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.476010] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.476600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.476740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.476755] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.476877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.477948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.478062] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.478752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.479239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.479244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.479355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.504511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.504516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.504640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.504778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.505804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.505942] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.508490] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.532873] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.537538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.537662] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.538138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.538290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.538310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.538442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.538931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.539446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.540019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.541214] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.542306] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.543044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.543197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.543331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.543460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.544069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.544208] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.544223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.544345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.545419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.545543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.546228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.546746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.546753] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.546888] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.571423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.571427] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.571575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.571760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.572769] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.572906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.574177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.598551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.603445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.603570] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.604044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.604194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.604214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.604343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.604854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.605341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.605931] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.607093] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.608206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.608971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.609124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.609257] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.609387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.609984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.610124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.610139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.610260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.611334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.611448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.612146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.612671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.612678] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.612814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.637390] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.637394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.637532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.637710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.638717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.638868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.640176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.664581] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.668770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.668888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.669363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.669541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.669574] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.669703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.670177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.670717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.671252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.672414] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.673505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.674295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.674448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.674604] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.674734] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.675316] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.675456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.675481] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.675603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.676690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.676804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.677484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.678001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.678006] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.678116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.703807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.703811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.703933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.704070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.705080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.705190] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.706493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.730834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.735678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.735801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.736276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.736426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.736446] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.736668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.737146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.737667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.738222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.739300] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.740371] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.741131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.741284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.741417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.741559] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.742141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.742279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.742295] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.742416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.743507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.743621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.744293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.744807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.744812] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.744922] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.769512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.769516] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.769667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.769804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.771291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.771408] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.772798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.797187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.801555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.801658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.802119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.802258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.802277] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.802396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.802934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.803436] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.804036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.805184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.806209] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.806998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.807152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.807286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.807415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.808038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.808198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.808214] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.808347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.809453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.809579] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.810226] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.810786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.810792] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.810933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.834411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.834416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.834542] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.834749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.835754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.835932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.837336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.861728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.866556] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.866676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.867148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.867297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.867332] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.867498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.868022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.868558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.869108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.870352] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.871447] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.872231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.872385] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.872531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.872687] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.873281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.873420] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.873436] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.873568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.874681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.874822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.875518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.876010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.876015] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.876126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.900173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.900178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.900288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.900426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.901669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.901691] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.903061] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.927382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.932259] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.932370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.932867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.933036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.933055] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.933178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.933652] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.934169] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.934739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [213.936004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [213.937087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [213.937875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [213.938029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.938163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.938292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.938887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.939056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [213.939072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [213.939193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.940263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.940378] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.941088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [213.941592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.941597] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.941735] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [213.965187] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [213.965192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [213.965304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.965441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.966720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [213.966767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [213.968070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.992450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.997323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.997434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.997931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.998100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [213.998119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [213.998242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.998712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.999234] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.999803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.001076] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.002194] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.002967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.003122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.003256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.003385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.003983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.004150] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.004166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.004288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.005364] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.005484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.006173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.006703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.006708] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.006848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.030924] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.030929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.031044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.031184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.033215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.033343] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.035838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.060228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.064835] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.064998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.065487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.065709] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.065728] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.065849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.066328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.066851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.067401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.068508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.069511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.070291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.070443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.070599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.070756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.071351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.071500] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.071521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.071676] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.072754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.072895] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.073588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.074091] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.074096] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.074208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.098781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.098786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.098910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.099048] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.100059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.100206] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.101517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.125837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.131301] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.131432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.131949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.132103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.132123] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.132243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.132770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.133248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.133816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.135002] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.136084] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.136863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.137017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.137150] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.137279] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.137896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.138061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.138077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.138195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.139302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.139415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.140113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.140618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.140625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.140739] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.163664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.163668] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.163781] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.163921] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.164945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.165113] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.166488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.190878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.195736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.195901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.196377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.196581] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.196601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.196734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.197210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.197756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.198274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.199361] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.200461] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.201228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.201382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.201537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.201667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.202249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.202389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.202405] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.202535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.203602] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.203716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.204401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.204904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.204909] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.205019] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.229643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.229648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.229760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.229898] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.231389] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.231532] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.232911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.257285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.262136] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.262263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.262760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.262936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.262955] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.263075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.263561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.264063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.264622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.265839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.266933] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.267671] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.267825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.267959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.268089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.268680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.268819] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.268834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.268956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.270058] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.270172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.270860] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.271361] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.271366] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.271490] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.294988] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.294993] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.295106] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.295243] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.296740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.296929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.298175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.322547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.327463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.327592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.328070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.328223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.328243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.328375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.328871] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.329386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.329959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.331209] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.332305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.333046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.333198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.333332] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.333461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.334076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.334216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.334231] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.334353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.335428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.335561] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.336259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.336752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.336758] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.336894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.361526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.361531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.361655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.361793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.363282] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.363425] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.365808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.390215] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.396139] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.396242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.396742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.396927] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.396946] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.397065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.397550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.398053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.398614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.399790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.400836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.401597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.401813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.401943] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.402070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.402687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.402824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.402839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.402957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.403647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.403758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.404437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.404943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.404948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.405057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.433483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.433488] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.433636] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.433774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.434798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.434965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.436334] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.460764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.466209] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.466340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.466835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.466976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.466995] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.467141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.467638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.468124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.468701] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.469836] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.470928] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.471670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.471834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.471964] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.472091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.472684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.472853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.472868] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.472987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.473673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.473786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.474468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.474973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.474978] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.475090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.498584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.498601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.498713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.498851] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.500367] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.500537] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.501889] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.526258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.531269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.531401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.531916] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.532094] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.532115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.532244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.532736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.533242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.533799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.534950] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.536041] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.536804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.536958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.537091] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.537221] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.537828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.538029] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.538044] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.538163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.539238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.539349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.540589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.541122] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.541127] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.541236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.568045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.568049] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.568158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.568295] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.569776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.569893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.572454] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.596850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.601535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.601639] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.602107] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.602250] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.602269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.602391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.602866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.603380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.603942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.605199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.606294] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.607052] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.607206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.607340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.607484] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.608078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.608219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.608234] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.608356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.609432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.609557] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.610237] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.610764] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.610769] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.610880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.636553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.636558] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.636681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.636818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.638308] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.638422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.639843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.664203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.669244] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.669368] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.669868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.670058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.670078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.670206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.670706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.671204] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.671762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.672952] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.673830] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.674591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.674745] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.674878] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.675007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.675598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.675737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.675752] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.675874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.676950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.677064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.677750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.678248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.678253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.678365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.702941] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.702946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.703070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.703208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.704698] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.704846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.706143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.730523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.735414] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.735520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.735986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.736125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.736142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.736260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.736765] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.737249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.737834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.738961] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.740053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.740814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.740967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.741100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.741229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.741822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.741988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.742004] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.742127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.743203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.743317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.744026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.744525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.744530] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.744642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.769196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.769200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.769311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.769447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.771015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.771128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.772466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.796814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.801549] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.801674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.802152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.802305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.802325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.802456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.802942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.803468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.804030] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.805212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.806306] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.807044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.807197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.807330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.807460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.808069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.808235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.808253] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.808375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.809462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.809584] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.810234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.810795] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.810800] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.810911] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.833827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.833831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.833944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.834084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.835714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.835735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.837073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.861438] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.866996] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.867141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.867651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.867846] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.867866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.867996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.868492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.868994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.869553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.870796] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.871832] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.872594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.872747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.872879] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.873009] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.873601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.873741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.873756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.873877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.874982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.875097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.875792] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.876280] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.876285] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.876397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.900443] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.900447] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.900600] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.900787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.901816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.901932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.903179] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.927532] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.932362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.932462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.932942] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.933085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [214.933103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [214.933225] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.933690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.934216] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.934774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [214.936003] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [214.937088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [214.937861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [214.938013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.938146] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.938275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.938868] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.939008] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [214.939024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [214.939145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.940211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.940324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.941030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [214.941523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.941529] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.941651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [214.968373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [214.968377] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [214.968530] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.968684] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.970187] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [214.970326] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [214.971494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.995849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.000499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.000603] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.001067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.001207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.001225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.001344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.001817] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.002322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.002923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.004051] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.005142] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.005876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.006030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.006163] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.006292] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.006887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.007027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.007043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.007165] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.008227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.008341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.009057] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.009553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.009558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.009680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.035895] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.035900] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.036025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.036162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.037681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.037814] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.039162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.063519] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.068443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.068606] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.069090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.069252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.069272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.069400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.069961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.070444] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.071021] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.072166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.072913] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.073673] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.073826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.073959] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.074089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.074683] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.074824] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.074839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.074961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.076056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.076169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.076831] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.077350] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.077356] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.077466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.102559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.102565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.102704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.102841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.103861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.104050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.105389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.129744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.134538] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.134660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.135134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.135283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.135303] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.135431] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.135944] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.136431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.137016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.138140] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.139206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.139970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.140123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.140256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.140386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.140996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.141162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.141178] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.141299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.142372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.142497] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.143162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.143704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.143709] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.143820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.168375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.168380] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.168534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.168714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.169710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.169931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.171325] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.195681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.201054] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.201187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.201674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.201827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.201846] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.201965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.202429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.202957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.203538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.204780] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.205833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.206604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.206758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.206891] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.207021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.207620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.207760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.207776] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.207897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.208999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.209114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.209801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.210298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.210303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.210425] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.237153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.237157] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.237266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.237403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.238892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.239007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.240384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.264742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.269566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.269687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.270162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.270310] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.270330] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.270458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.270999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.271492] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.272055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.273199] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.274296] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.275053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.275207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.275340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.275485] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.276068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.276207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.276223] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.276344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.277427] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.277551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.278230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.278761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.278766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.278877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.304568] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.304586] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.304696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.304834] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.306333] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.306516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.307903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.332307] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.336547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.336673] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.337151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.337303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.337323] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.337455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.337943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.338468] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.339031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.340210] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.341304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.342043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.342196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.342330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.342458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.343054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.343194] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.343210] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.343330] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.344395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.344520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.345202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.345728] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.345733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.345845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.371535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.371540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.371663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.371801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.373301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.373416] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.376186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.400497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.405422] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.405546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.406022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.406172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.406192] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.406321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.406803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.407308] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.407878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.409004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.410087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.410861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.411014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.411147] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.411278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.411882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.412022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.412038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.412159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.413232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.413346] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.414056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.414556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.414561] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.414672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.438172] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.438176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.438287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.438425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.440067] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.440112] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.441380] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.465711] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.470491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.470613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.471083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.471232] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.471251] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.471380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.471909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.472408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.472995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.474139] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.475206] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.475972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.476126] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.476259] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.476388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.476998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.477137] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.477153] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.477274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.478351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.478464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.479145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.479668] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.479673] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.479786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.505417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.505422] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.505589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.505778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.507399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.507422] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.509824] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.534229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.539146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.539250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.539725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.539902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.539921] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.540040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.540522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.541041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.541602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.542753] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.543864] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.544645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.544801] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.544934] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.545063] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.545661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.545802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.545818] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.545940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.547045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.547159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.547856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.548344] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.548349] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.548460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.571961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.571966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.572080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.572222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.573249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.573368] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.575514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.599865] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.605100] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.605223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.605729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.605944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.605962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.606107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.606598] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.607085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.607680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.608810] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.609842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.610609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.610763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.610897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.611026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.611627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.611767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.611783] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.611904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.613011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.613125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.613818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.614296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.614301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.614413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.641220] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.641225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.641334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.641479] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.642546] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.642682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.644046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.668384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.672486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.672594] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.673069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.673218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.673238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.673367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.673882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.674368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.674950] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.676119] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.677207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.678000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.678153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.678286] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.678415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.679044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.679181] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.679196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.679315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.680413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.680548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.681251] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.681815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.681820] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.681985] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.708237] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.708242] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.708353] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.708534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.709669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.709699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.711066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.735405] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.740296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.740426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.740930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.741095] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.741116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.741245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.741737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.742243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.742803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.743988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.745089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.745876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.746031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.746164] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.746294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.746884] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.747024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.747040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.747161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.748236] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.748350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.749044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.749534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.749539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.749690] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.773218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.773223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.773337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.773486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.774535] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.774696] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.776069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.798891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.804314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.804421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.804930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.805101] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.805120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.805240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.805725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.806229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.806804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.807961] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.808744] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.809503] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.809659] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.809792] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.809921] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.810517] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.810657] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.810673] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.810794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.811848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.811962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.812654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.813143] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.813148] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.813259] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.838363] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.838368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.838506] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.838704] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.840193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.840320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.842817] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.867193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.871515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.871620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.872088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.872231] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.872249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.872372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.872852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.873366] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.873928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.875182] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.876207] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.876971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.877125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.877258] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.877388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.877994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.878134] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.878149] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.878270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.879334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.879448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.880144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.880629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.880635] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.880772] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.906478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.906483] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.906651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.906789] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.908303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.908423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.910810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.935162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.940577] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.940737] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.941195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.941330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [215.941349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [215.941465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.941995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.942499] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.943065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [215.944216] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [215.945311] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [215.946043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [215.946196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.946330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.946459] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.947068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.947234] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [215.947250] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [215.947371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.948448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.948570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.949252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [215.949788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.949793] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.949904] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [215.973937] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [215.973942] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [215.974055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.974194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.975207] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [215.975350] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [215.977810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.002210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.006510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.006618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.007093] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.007244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.007263] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.007385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.007864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.008388] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.008939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.010196] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.011301] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.012047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.012201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.012335] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.012464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.013055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.013195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.013211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.013333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.014396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.014529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.015219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.015727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.015732] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.015843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.039885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.039890] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.040025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.040162] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.041669] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.041817] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.043187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.067600] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.072580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.072711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.073186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.073335] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.073355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.073494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.074014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.074535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.075088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.076331] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.077421] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.078184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.078339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.078485] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.078614] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.079207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.079346] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.079362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.079492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.080566] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.080680] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.081372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.081852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.081857] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.081968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.108222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.108227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.108337] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.108483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.109678] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.109700] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.111087] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.135442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.140468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.140609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.141084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.141233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.141253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.141409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.141946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.142433] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.143022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.144206] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.145298] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.146044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.146198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.146331] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.146460] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.147065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.147204] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.147220] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.147341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.148414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.148537] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.149232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.149723] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.149728] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.149839] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.176078] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.176083] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.176195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.176333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.177980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.178001] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.179390] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.203794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.209268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.209396] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.209912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.210093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.210114] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.210243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.210738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.211240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.211798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.212984] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.214087] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.214861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.215014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.215148] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.215277] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.215871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.216011] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.216026] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.216148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.217223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.217337] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.218051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.218553] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.218559] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.218670] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.244322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.244327] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.244439] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.244646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.246216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.246335] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.248805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.273172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.277514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.277618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.278083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.278221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.278239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.278387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.278901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.279415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.279988] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.281211] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.282305] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.283043] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.283196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.283329] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.283458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.284063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.284203] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.284218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.284340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.285417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.285542] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.286233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.286733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.286738] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.286875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.311455] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.311460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.311610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.311826] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.313315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.313435] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.314843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.339227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.343514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.343617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.344078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.344219] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.344238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.344357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.344898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.345401] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.345977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.347135] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.347908] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.348672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.348828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.348961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.349090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.349687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.349827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.349843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.349964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.351060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.351174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.351862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.352362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.352367] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.352486] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.379800] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.379805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.379929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.380066] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.381585] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.381757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.383133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.407520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.412419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.412541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.413014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.413191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.413211] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.413339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.413823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.414337] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.414899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.416004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.417099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.417879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.418032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.418166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.418295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.418901] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.419081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.419096] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.419214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.420319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.420458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.421159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.421670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.421677] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.421836] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.449167] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.449172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.449285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.449424] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.450458] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.450766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.452170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.476567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.481464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.481592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.482073] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.482213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.482231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.482375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.482900] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.483391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.483980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.485137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.485912] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.486674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.486827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.486961] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.487090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.487698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.487862] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.487877] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.487996] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.489066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.489178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.490367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.490909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.490914] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.491022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.514484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.514489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.514601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.514743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.516247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.516364] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.518831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.543236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.547513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.547619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.548090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.548236] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.548256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.548374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.548902] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.549400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.549977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.551108] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.552208] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.552842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.552996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.553130] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.553260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.553938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.554143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.554159] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.554278] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.555343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.555482] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.557007] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.557545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.557550] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.557684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.582817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.582822] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.582935] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.583075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.584100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.584266] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.585517] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.609916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.614861] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.614981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.615433] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.615645] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.615685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.615872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.616336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.616858] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.617422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.618749] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.619839] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.620610] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.620763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.620897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.621027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.621626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.621766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.621781] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.621903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.623008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.623123] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.623807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.624278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.624283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.624420] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.649041] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.649045] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.649155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.649292] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.650811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.650982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.652349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.676717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.681561] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.681692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.682167] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.682316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.682336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.682531] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.683032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.683554] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.684120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.685225] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.686346] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.687114] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.687267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.687400] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.687553] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.688202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.688339] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.688354] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.688479] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.690064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.690205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.690942] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.691963] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.691968] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.692106] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.719429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.719434] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.719584] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.719801] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.721290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.721407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.723808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.748218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.752535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.752638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.753102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.753241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.753259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.753406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.753920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.754407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.754983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.756137] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.756909] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.757675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.757830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.757963] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.758092] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.758702] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.758902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.758917] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.759035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.760685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.760796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.762295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.762843] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.762848] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.762971] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.789228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.789232] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.789342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.789488] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.790562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.790699] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.792070] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.816424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.822505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.822661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.823133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.823279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.823298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.823424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.823969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.824452] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.825026] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.826198] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.826992] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.827756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.827909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.828042] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.828182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.828795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.828936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.828952] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.829073] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.830149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.830263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.830954] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.831436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.831441] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.831562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.854490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.854494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.854607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.854747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.856252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.856395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.858492] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.882875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.888268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.888400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.888920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.889100] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.889120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.889248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.889745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.890250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.890818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.892090] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.893205] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.893968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.894123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.894256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.894385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.894979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.895119] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.895135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.895257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.896333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.896446] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.897137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.897610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.897615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.897768] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.921240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.921245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.921360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.921535] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.922579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.922734] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.924073] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.948459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.953351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.953489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.954028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.954193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [216.954214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [216.954356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.954891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.955377] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.955964] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [216.957092] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [216.958198] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [216.958963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [216.959117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.959250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.959380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.959988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.960128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [216.960143] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [216.960265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.961330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.961443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.962150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [216.962638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.962643] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.962754] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [216.989024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [216.989029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [216.989141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.989278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.990771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [216.990947] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [216.992333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.016631] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.021590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.021719] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.022193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.022343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.022362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.022558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.023097] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.023618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.024184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.025334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.026432] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.027051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.027206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.027340] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.027469] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.028089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.028251] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.028267] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.028385] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.029562] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.029673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.030662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.031159] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.031164] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.031310] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.056476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.056481] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.056621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.056758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.058261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.058407] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.060831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.085237] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.089888] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.090017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.090527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.090719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.090740] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.090869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.091354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.091870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.092419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.093508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.094505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.095265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.095419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.095566] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.095696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.096278] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.096417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.096432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.096564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.097640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.097754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.098440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.098942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.098947] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.099058] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.122561] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.122567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.122682] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.122822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.124316] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.124457] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.126831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.151227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.156402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.156580] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.157065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.157210] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.157229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.157354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.157894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.158396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.158955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.160209] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.161303] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.162040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.162193] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.162345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.162488] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.163071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.163212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.163228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.163348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.164420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.164543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.165223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.165746] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.165750] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.165862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.190416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.190421] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.190569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.190785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.192273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.192393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.194813] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.219184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.223513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.223617] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.224082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.224221] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.224239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.224388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.224893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.225381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.225969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.227088] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.228195] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.228961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.229116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.229250] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.229379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.229974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.230114] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.230130] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.230252] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.231326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.231440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.232148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.232629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.232634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.232746] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.257878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.257883] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.257991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.258127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.259746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.259767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.261132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.285539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.290416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.290541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.291016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.291165] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.291185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.291341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.291865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.292353] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.292966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.294144] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.295236] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.296005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.296159] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.296293] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.296423] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.297032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.297198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.297215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.297337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.298423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.298549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.299235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.299719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.299724] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.299861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.322863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.322868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.322982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.323123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.324156] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.324331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.325522] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.349906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.355320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.355448] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.355955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.356141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.356161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.356281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.356769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.357269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.357853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.359006] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.360092] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.360886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.361040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.361173] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.361303] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.361893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.362061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.362077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.362199] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.363275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.363390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.364090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.364585] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.364591] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.364741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.388250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.388255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.388368] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.388556] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.390116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.390253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.391493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.415818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.420674] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.420803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.421275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.421424] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.421444] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.421614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.422140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.422662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.423215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.424321] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.425419] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.426184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.426338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.426484] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.426640] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.427234] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.427375] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.427390] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.427524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.428637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.428779] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.429468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.429951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.429958] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.430093] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.455229] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.455233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.455344] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.455504] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.457058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.457196] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.458493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.482830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.487681] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.487811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.488283] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.488433] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.488453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.488620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.489148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.489668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.490222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.491345] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.492484] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.493276] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.493429] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.493574] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.493732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.494326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.494466] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.494491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.494642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.495732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.495873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.496568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.497053] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.497058] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.497169] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.521194] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.521199] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.521311] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.521449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.523037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.523151] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.524475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.548848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.553766] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.553935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.554409] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.554597] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.554618] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.554797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.555277] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.555783] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.556337] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.557507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.558508] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.559289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.559442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.559597] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.559753] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.560338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.560493] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.560509] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.560660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.561716] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.561867] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.562565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.563055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.563060] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.563172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.586649] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.586654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.586778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.586914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.588422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.588676] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.590051] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.614439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.618570] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.618680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.619155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.619305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.619324] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.619454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.619960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.620455] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.621035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.622212] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.623340] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.624108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.624262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.624396] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.624540] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.625162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.625303] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.625319] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.625443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.626550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.626665] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.627348] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.627882] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.627887] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.628027] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.653211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.653217] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.653329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.653466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.655163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.655184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.656544] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.680941] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.686369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.686518] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.687001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.687148] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.687167] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.687293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.687791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.688295] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.688903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.690004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.691088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.691880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.692033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.692166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.692296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.692915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.693107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.693122] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.693242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.694308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.694467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.695451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.695934] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.695939] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.696047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.722854] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.722859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.722971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.723109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.724646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.724792] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.726192] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.750544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.754687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.754816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.755288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.755434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.755453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.755637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.756168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.756704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.757256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.758398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.759507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.760270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.760424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.760572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.760732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.761327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.761468] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.761494] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.761646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.762714] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.762855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.763545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.764045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.764050] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.764162] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.788195] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.788200] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.788322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.788459] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.790037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.790200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.791493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.815851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.820710] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.820840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.821310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.821459] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.821492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.821687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.822181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.822702] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.823256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.824355] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.825299] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.826050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.826203] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.826337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.826466] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.827065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.827233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.827248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.827371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.828457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.828577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.829270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.829758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.829765] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.829902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.854997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.855002] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.855113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.855251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.856422] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.856445] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.857882] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.882260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.886513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.886616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.887081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.887220] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.887239] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.887358] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.887863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.888362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.888928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.890231] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.891328] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.892096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.892251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.892384] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.892529] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.893145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.893286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.893302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.893423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.894509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.894624] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.895307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.895831] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.895838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.895986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.922165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.922170] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.922282] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.922421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.923954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.924120] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.925533] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.949944] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.954510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.954613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.955079] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.955218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [217.955236] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [217.955354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.955863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.956360] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.956922] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [217.958091] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [217.959212] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [217.959981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [217.960134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.960267] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.960396] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.961013] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.961179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [217.961195] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [217.961317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.962416] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.962541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.963216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [217.963739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.963744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.963894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [217.988429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [217.988435] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [217.988589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.988802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.989838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [217.989973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [217.991339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.015726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.021082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.021231] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.021725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.021936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.021954] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.022075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.022569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.023053] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.023622] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.024800] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.025833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.026601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.026763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.026893] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.027019] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.027606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.027807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.027822] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.027941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.029013] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.029149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.030332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.030894] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.030899] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.031035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.058328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.058333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.058442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.058603] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.060176] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.060310] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.061532] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.085937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.090881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.091037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.091537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.091741] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.091760] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.091881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.092344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.092867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.093420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.094508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.095463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.096302] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.096455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.096612] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.096765] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.097345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.097504] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.097522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.097689] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.098730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.098885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.099618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.100070] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.100077] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.100211] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.130222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.130227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.130338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.130484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.132043] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.132182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.133528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.157931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.162827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.162936] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.163400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.163553] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.163598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.163778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.164242] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.164764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.165318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.166510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.167510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.168292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.168446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.168603] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.168757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.169338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.169499] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.169514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.169675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.170797] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.170909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.171858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.172349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.172354] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.172462] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.199243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.199248] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.199358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.199519] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.201061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.201223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.202528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.226932] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.231801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.231916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.232390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.232549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.232595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.232760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.233224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.233745] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.234299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.235438] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.236505] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.237268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.237421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.237577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.237730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.238310] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.238447] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.238462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.238589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.239754] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.239865] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.240874] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.241328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.241332] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.241441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.266001] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.266006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.266116] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.266253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.267755] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.267880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.269160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.293550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.298398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.298503] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.298979] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.299127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.299147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.299275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.299755] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.300262] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.300831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.302007] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.303090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.303879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.304031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.304165] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.304294] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.304890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.305058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.305073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.305194] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.306282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.306396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.307095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.307620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.307625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.307765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.333999] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.334003] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.334113] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.334251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.335281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.335413] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.337840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.362218] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.366552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.366702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.367163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.367302] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.367320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.367439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.367945] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.368428] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.369004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.370203] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.371338] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.372108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.372261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.372395] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.372549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.373162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.373300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.373314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.373433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.374538] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.375084] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.375816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.376271] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.376278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.376410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.402117] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.402126] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.402331] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.402629] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.404248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.404414] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.407195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.431542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.436535] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.436690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.437163] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.437311] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.437331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.437456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.437971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.438453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.439029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.440218] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.441015] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.441776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.441928] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.442060] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.442189] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.442796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.442960] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.442975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.443094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.444180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.444290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.444985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.445460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.445465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.445583] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.470180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.470185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.470293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.470430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.471920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.472036] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.473372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.497761] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.502707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.502837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.503312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.503463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.503494] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.503684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.504157] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.504681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.505234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.506358] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.507463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.508131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.508284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.508418] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.508561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.509144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.509283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.509298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.509419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.510513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.510627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.511305] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.511838] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.511843] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.511953] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.538191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.538195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.538304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.538441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.539926] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.540041] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.541377] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.565773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.570733] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.570889] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.571361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.571540] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.571562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.571733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.572202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.572730] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.573282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.574423] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.575506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.576268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.576421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.576577] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.576732] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.577322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.577457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.577495] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.577654] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.578773] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.578885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.579417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.579873] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.579878] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.579986] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.605652] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.605657] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.605779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.605915] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.607407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.607579] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.608963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.633370] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.638882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.639037] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.639535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.639744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.639764] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.639893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.640366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.640893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.641453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.642763] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.643833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.644597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.644749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.644882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.645012] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.645603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.645743] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.645758] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.645878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.646983] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.647097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.647787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.648290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.648295] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.648405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.674674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.674679] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.674819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.674984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.676477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.676650] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.678020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.702424] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.706046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.706153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.706637] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.706849] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.706868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.706998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.707481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.707985] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.708555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.709748] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.710833] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.711597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.711758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.711887] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.712013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.712602] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.712803] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.712817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.712935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.714525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.714664] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.715347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.715891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.715896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.716047] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.740093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.740097] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.740206] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.740343] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.741904] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.742016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.743410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.767856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.772764] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.772893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.773367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.773529] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.773571] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.773742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.774216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.774739] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.775291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.776427] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.777507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.778269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.778421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.778567] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.778696] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.779277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.779417] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.779432] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.779562] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.780638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.780752] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.781436] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.781939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.781944] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.782055] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.809359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.809363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.809482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.809669] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.811162] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.811309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.813527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.837940] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.841514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.841629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.842103] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.842252] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.842272] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.842401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.842914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.843398] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.843974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.845142] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.846218] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.846996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.847149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.847282] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.847411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.848032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.848182] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.848196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.848315] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.849407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.849524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.850615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.851093] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.851098] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.851219] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.877983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.877988] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.878097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.878234] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.879777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.879922] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.881144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.905520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.909656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.909781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.910252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.910398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.910418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.910571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.911109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.911632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.912184] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.913306] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.914378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.915133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.915286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.915419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.915571] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.916181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.916322] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.916337] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.916458] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.917553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.917668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.918345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.918880] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.918885] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.919035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [218.946311] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.946315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [218.946425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.946637] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.948161] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [218.948296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [218.949520] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.973922] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.978891] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.979048] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.979549] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.979754] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [218.979773] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [218.979894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.980357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.980886] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.981433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [218.982508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [218.983510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [218.984292] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [218.984445] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.984593] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.984749] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.985332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.985481] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [218.985496] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [218.985646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.986734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.986884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.987582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [218.988073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [218.988078] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.988188] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.014404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.014409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.014527] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.014741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.015767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.015907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.017177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.041611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.046623] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.046778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.047250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.047398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.047417] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.047554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.048100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.048624] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.049177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.050315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.051074] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.051849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.052001] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.052134] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.052263] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.052870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.053034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.053049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.053167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.054288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.054399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.055863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.056416] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.056421] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.056537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.083891] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.083895] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.084017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.084154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.085719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.085836] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.087141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.111529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.116524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.116680] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.117152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.117300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.117320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.117445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.117959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.118442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.119018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.120215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.121326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.122089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.122241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.122374] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.122528] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.123136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.123272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.123287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.123405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.124543] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.125076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.126262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.126786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.126791] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.126914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.152067] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.152071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.152180] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.152316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.153323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.153439] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.154860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.179258] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.184744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.184899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.185371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.185545] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.185583] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.185753] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.186226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.186750] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.187302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.188444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.189507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.190271] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.190425] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.190572] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.190740] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.191323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.191465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.191491] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.191643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.192730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.192872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.193565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.194056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.194061] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.194172] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.218212] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.218216] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.218326] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.218463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.219978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.220107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.221499] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.245894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.250839] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.250995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.251467] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.251658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.251679] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.251849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.252309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.252835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.253389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.254508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.255510] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.256295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.256447] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.256607] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.256760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.257340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.257487] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.257503] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.257650] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.258771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.258884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.259856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.260325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.260330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.260438] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.287255] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.287260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.287382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.287587] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.288664] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.288823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.290175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.314560] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.318680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.318821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.319307] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.319456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.319487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.319677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.320143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.320682] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.321230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.322353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.322999] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.323761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.323914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.324048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.324177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.324772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.324948] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.324964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.325087] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.326163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.326277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.326965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.327486] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.327491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.327631] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.351727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.351732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.351870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.352007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.353509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.353644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.355008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.379372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.383550] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.383684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.384155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.384301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.384320] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.384445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.384959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.385446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.386022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.387201] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.388000] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.388761] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.388913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.389047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.389176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.389771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.389945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.389961] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.390083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.391157] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.391273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.391960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.392432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.392437] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.392557] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.418803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.418807] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.418930] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.419068] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.420556] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.420731] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.422069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.446445] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.450616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.450734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.451196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.451332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.451351] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.451467] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.451966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.452453] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.453029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.454217] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.455342] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.456112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.456265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.456398] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.456552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.457157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.457294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.457309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.457427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.459023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.459135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.459862] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.460326] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.460333] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.460466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.486169] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.486174] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.486284] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.486421] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.487639] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.487661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.489045] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.513433] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.518951] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.519110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.519625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.519810] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.519829] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.519949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.520439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.520976] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.521512] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.522694] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.523790] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.524510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.524689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.524822] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.524951] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.525545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.525713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.525729] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.525852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.526945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.527088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.527778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.528257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.528262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.528374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.552961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.552966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.553089] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.553227] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.554436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.554458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.555862] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.580207] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.584567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.584670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.585131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.585270] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.585288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.585424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.585939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.586424] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.587016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.588146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.589222] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.589994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.590151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.590284] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.590413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.591024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.591191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.591207] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.591329] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.592415] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.592539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.593233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.593729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.593736] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.593872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.617939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.617944] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.618058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.618210] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.619765] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.619895] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.621197] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.645580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.650512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.650642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.651117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.651267] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.651287] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.651415] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.651956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.652442] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.653019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.654195] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.655293] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.656046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.656201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.656334] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.656464] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.657063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.657230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.657247] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.657369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.658453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.658576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.659272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.659774] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.659780] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.659920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.683953] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.683958] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.684072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.684212] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.685248] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.685405] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.687838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.712225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.716513] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.716618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.717084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.717224] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.717242] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.717361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.717879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.718387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.718977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.720144] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.721251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.722046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.722200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.722333] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.722463] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.723084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.723263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.723278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.723397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.724621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.724733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.725694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.726737] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.726744] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.726894] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.750902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.750907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.751021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.751161] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.752800] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.752821] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.754208] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.778591] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.783546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.783675] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.784150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.784299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.784318] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.784447] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.784989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.785482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.786036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.787180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.788250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.789038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.789191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.789325] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.789454] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.790061] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.790235] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.790251] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.790373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.791467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.791591] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.792282] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.792788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.792795] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.792932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.819171] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.819176] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.819288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.819426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.820498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.820635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.822033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.846419] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.851302] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.851432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.851949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.852123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.852143] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.852262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.852747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.853251] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.853809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.854985] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.856088] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.856870] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.857025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.857158] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.857287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.857893] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.858105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.858120] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.858239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.859332] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.859444] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.859811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.860268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.860273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.860398] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.885573] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.885590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.885701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.885838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.887332] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.887502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.888846] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.913168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.917867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.918012] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.918511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.918705] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.918723] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.918844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.919307] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.919845] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.920394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.921507] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.922506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.923321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.923488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.923649] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.923779] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.924371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.924521] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.924541] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.924688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.925774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.925917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.926600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.927086] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.927091] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.927203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [219.951250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.951255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [219.951367] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.951549] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.953116] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [219.953253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [219.954524] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.978916] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.984035] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.984140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.984629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.984815] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [219.984834] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [219.984954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.985417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.985947] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.986530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [219.987687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [219.988782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [219.989510] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [219.989686] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.989820] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.989949] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.990557] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.990724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [219.990741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [219.990862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.991937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.992089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.992775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [219.993246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [219.993251] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.993363] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.017357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.017362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.017482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.017697] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.019215] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.019352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.021845] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.046208] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.051635] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.051870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.052581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.053014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.053057] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.053367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.054080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.054827] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.055507] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.057116] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.057992] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.058687] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.059068] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.059401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.059746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.060511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.060802] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.060829] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.061042] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.062263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.062462] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.063250] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.063814] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.063823] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.064081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.092045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.092050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.092161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.092299] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.093318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.093481] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.094897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.118736] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.123001] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.123115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.123601] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.123807] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.123840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.123974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.124453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.124967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.125524] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.126699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.127799] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.128511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.128698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.128832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.128961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.129563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.129730] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.129746] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.129868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.130965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.131106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.131800] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.132297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.132303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.132414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.161432] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.161437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.161561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.161769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.162780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.162924] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.164175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.188553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.193397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.193526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.193997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.194146] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.194166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.194295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.194807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.195297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.195857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.197044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.198145] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.198892] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.199047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.199181] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.199311] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.199908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.200078] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.200094] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.200216] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.201321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.201437] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.202137] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.202657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.202662] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.202811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.229610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.229628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.229738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.229877] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.231382] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.231547] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.232933] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.257285] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.262175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.262306] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.262792] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.263006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.263025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.263146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.263643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.264136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.264694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.265840] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.266938] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.267675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.267831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.267965] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.268095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.268697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.268899] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.268915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.269034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.270136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.270248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.271420] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.271957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.271962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.272071] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.296114] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.296119] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.296231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.296369] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.298018] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.298040] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.299382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.323769] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.329175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.329299] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.329810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.329996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.330015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.330134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.330626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.331113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.331708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.332839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.333934] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.334482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.334663] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.334797] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.334927] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.335518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.335685] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.335701] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.335823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.336919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.337061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.337755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.338245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.338250] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.338362] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.364031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.364035] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.364146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.364284] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.365916] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.365938] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.367176] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.391530] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.396394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.396520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.396991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.397141] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.397161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.397290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.397801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.398300] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.398873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.400007] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.401089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.401900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.402054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.402189] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.402318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.402927] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.403128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.403144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.403263] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.404368] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.404490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.405172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.405719] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.405726] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.405873] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.432128] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.432148] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.432260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.432397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.434017] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.434048] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.435389] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.459735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.464543] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.464664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.465139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.465288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.465308] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.465437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.465987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.466509] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.467047] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.468215] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.469320] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.470094] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.470247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.470380] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.470524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.471144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.471299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.471316] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.471437] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.472539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.472654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.473340] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.473861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.473866] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.474007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.502397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.502402] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.502522] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.502741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.503756] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.504000] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.505365] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.529731] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.535029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.535152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.535667] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.535853] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.535872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.535992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.536455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.536984] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.537566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.538723] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.539816] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.540583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.540736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.540870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.540999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.541603] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.541779] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.541795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.541918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.543004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.543129] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.543822] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.544316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.544321] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.544432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.569617] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.569622] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.569733] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.569871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.571374] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.571564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.572955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.597313] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.602755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.602915] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.603390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.603554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.603599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.603769] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.604233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.604786] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.605322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.606508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.607465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.608249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.608403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.608548] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.608705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.609300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.609440] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.609456] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.609587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.610704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.610845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.611517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.612019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.612024] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.612134] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.638961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.638966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.639077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.639215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.640936] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.640958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.642355] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.666708] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.671564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.671687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.672162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.672312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.672331] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.672502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.673033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.673550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.674114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.675259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.676376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.677022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.677190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.677320] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.677446] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.678078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.678240] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.678256] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.678375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.679515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.679631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.681108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.681671] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.681676] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.681826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.708590] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.708595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.708720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.708858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.710364] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.710533] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.711920] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.736263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.741109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.741342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.742070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.742513] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.742556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.742934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.743636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.744357] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.745054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.746712] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.747568] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.748259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.748670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.749069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.749324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.750028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.750318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.750345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.750577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.751840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.752085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.752876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.753456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.753464] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.753676] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.778409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.778415] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.778581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.778793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.779980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.780002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.781395] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.805713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.810493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.810615] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.811090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.811239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.811259] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.811416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.811960] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.812443] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.813035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.814186] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.815224] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.815997] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.816151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.816285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.816415] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.817025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.817201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.817218] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.817339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.818425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.818550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.819234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.819744] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.819749] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.819884] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.845546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.845551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.845689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.845827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.847331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.847493] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.848941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.873292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.878222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.878350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.878878] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.879047] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.879066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.879185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.879679] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.880174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.880733] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.881914] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.883001] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.883760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.883915] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.884048] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.884177] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.884773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.884943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.884959] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.885081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.886147] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.886262] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.886952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.887420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.887425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.887546] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.912697] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.912702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.912826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.912963] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.914457] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.914604] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.915976] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.940346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.945359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.945493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.946030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.946169] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [220.946188] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [220.946335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.946823] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.947318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.947887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [220.949094] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [220.950220] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [220.950990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [220.951144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.951277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.951407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.952019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.952185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [220.952201] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [220.952323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.953399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.953520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.954205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [220.954722] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.954727] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.954851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [220.978919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [220.978924] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [220.979048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.979186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.980841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [220.980886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [220.982223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.006571] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.010677] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.010797] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.011273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.011423] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.011442] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.011585] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.012130] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.012653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.013204] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.014307] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.015378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.016133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.016287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.016421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.016565] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.017174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.017315] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.017331] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.017453] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.018552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.018668] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.019350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.019868] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.019873] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.020015] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.045718] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.045723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.045834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.045971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.047452] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.047597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.048995] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.073325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.078174] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.078300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.078786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.079001] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.079024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.079144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.079629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.080133] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.080692] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.081839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.082935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.083672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.083827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.083960] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.084089] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.084678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.084848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.084864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.084986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.086061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.086175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.086863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.087364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.087369] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.087489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.111549] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.111554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.111679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.111816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.113297] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.113436] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.115858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.140202] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.144874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.145005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.145489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.145696] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.145715] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.145863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.146328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.146857] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.147404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.148510] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.149507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.150288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.150443] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.150599] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.150757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.151341] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.151490] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.151506] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.151656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.152733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.152885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.153582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.154074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.154079] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.154191] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.177688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.177693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.177819] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.177956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.179438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.179608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.181014] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.205383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.210806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.210953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.211418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.211608] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.211648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.211816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.212280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.212803] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.213367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.214493] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.215511] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.216321] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.216488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.216658] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.216784] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.217363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.217538] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.217554] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.217736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.218840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.219423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.220103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.220660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.220667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.220813] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.247124] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.247129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.247241] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.247378] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.249033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.249078] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.250403] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.274726] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.279564] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.279686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.280157] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.280306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.280325] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.280509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.281022] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.281543] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.282109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.283256] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.284353] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.285121] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.285275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.285409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.285551] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.286182] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.286323] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.286339] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.286460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.287558] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.287673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.288360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.288862] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.288869] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.289006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.313064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.313069] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.313178] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.313316] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.314820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.314951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.316339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.340729] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.346141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.346269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.346795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.347007] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.347026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.347147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.347635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.348135] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.348694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.349838] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.350935] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.351675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.351838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.351968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.352094] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.352698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.352876] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.352892] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.353011] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.354110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.354222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.355211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.356238] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.356243] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.356353] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.381508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.381513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.381638] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.381775] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.383284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.383423] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.384815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.409182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.413837] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.413961] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.414436] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.414596] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.414640] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.414822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.415285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.415808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.416372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.417497] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.418466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.419254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.419408] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.419556] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.419712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.420306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.420446] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.420462] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.420592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.421715] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.421856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.422551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.423052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.423057] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.423167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.448839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.448845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.448969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.449106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.450138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.450274] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.451496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.475827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.481155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.481316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.481789] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.481994] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.482015] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.482163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.482640] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.483141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.483713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.484839] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.485936] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.486675] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.486839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.486970] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.487096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.487694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.487866] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.487881] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.488000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.489073] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.489213] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.489943] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.490431] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.490436] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.490571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.515778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.515783] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.515895] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.516033] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.517059] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.517197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.518528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.542876] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.547709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.547832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.548306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.548454] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.548484] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.548685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.549182] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.549704] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.550269] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.551401] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.552376] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.553135] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.553289] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.553422] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.553562] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.554179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.554320] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.554336] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.554457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.555554] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.555669] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.556355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.556869] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.556874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.556999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.582702] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.582707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.582830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.582968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.584449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.584595] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.586022] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.610376] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.614555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.614690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.615174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.615319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.615338] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.615464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.616003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.616500] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.617063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.618370] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.619357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.620160] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.620314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.620448] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.620604] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.621222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.621361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.621376] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.621535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.622704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.622841] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.623539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.624024] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.624029] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.624138] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.650900] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.650905] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.651030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.651167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.652773] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.652795] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.654169] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.678524] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.683464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.683629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.684112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.684275] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.684294] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.684423] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.684939] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.685430] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.686000] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.687164] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.688139] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.688760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.688913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.689047] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.689176] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.689772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.689937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.689954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.690091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.691165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.691281] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.691965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.692480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.692485] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.692625] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.716095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.716100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.716211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.716348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.717838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.717973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.719348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.743691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.748534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.748656] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.749129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.749278] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.749313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.749454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.750001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.750489] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.751054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.752192] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.752993] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.753758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.753913] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.754046] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.754175] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.754769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.754938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.754954] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.755076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.756171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.756285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.756982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.757481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.757486] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.757624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.783319] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.783324] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.783434] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.783642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.784838] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.784893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.786209] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.810544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.814633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.814750] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.815227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.815377] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.815396] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.815540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.816086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.816609] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.817161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.818297] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.819378] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.820133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.820286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.820420] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.820563] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.821184] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.821325] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.821342] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.821463] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.822569] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.822685] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.823362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.823874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.823881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.824026] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.848033] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.848038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.848149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.848287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.849776] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.849991] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.851375] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.875734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.880544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.880666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.881140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.881289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.881309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.881466] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.881984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.882511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.883065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.884228] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.885326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.886096] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.886249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.886382] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.886527] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.887148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.887290] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.887306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.887427] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.888514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.888629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.889318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.889819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.889824] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.889964] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.917259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.917264] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.917374] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.917538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.918801] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.918831] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.920195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.944626] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.950089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.950281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.950900] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.951196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [221.951227] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [221.951440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.952038] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.952630] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.953224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [221.954538] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [221.955253] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [221.955815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [221.956076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.956308] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.956552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.957294] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.957554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [221.957593] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [221.957860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.959026] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.959245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.959989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [221.960582] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.960590] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.960834] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [221.984976] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [221.984981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [221.985101] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.985249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.986256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [221.986395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [221.988828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.013155] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.018703] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.018806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.019270] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.019409] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.019427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.019560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.020094] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.020617] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.021180] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.022327] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.023426] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.024196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.024350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.024498] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.024661] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.025257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.025397] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.025414] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.025547] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.026662] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.026804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.027498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.027997] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.028002] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.028113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.052686] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.052692] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.052817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.052954] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.054436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.054601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.055986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.080344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.085821] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.085946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.086420] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.086579] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.086625] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.086793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.087257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.087808] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.088346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.089509] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.090507] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.091327] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.091491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.091662] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.091789] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.092378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.092573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.092590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.092760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.094347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.094507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.095189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.095742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.095747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.095932] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.121601] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.121606] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.121731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.121869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.123376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.123551] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.124938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.149321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.154219] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.154346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.154850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.155037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.155056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.155177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.155670] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.156165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.156724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.157913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.158998] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.159758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.159912] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.160045] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.160174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.160768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.160937] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.160953] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.161077] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.162142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.162256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.162941] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.163417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.163422] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.163545] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.189791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.189796] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.189920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.190057] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.191092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.191229] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.193843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.218181] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.222871] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.222995] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.223480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.223691] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.223710] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.223857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.224322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.224850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.225397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.226508] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.227506] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.228319] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.228484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.228646] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.228776] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.229359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.229506] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.229522] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.229683] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.230768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.230909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.231606] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.232094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.232099] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.232211] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.256236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.256240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.256351] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.256531] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.257693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.257714] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.259078] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.283442] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.287539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.287649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.288124] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.288273] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.288293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.288422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.288941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.289422] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.290014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.291188] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.292314] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.293090] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.293246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.293380] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.293524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.294144] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.294284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.294301] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.294422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.295529] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.295645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.296329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.296834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.296839] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.296981] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.321034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.321039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.321149] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.321287] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.322775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.322930] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.324326] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.348687] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.353542] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.353663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.354137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.354286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.354306] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.354462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.354980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.355461] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.356051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.357279] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.358379] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.359132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.359285] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.359419] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.359561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.360181] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.360321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.360338] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.360460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.361556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.361671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.362347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.362879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.362884] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.363023] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.388657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.388662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.388800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.388938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.390445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.390665] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.392069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.416412] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.421280] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.421389] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.421909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.422092] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.422124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.422243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.422734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.423231] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.423830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.424988] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.426090] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.426879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.427033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.427167] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.427297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.427931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.428109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.428125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.428245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.429369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.429492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.430478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.430980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.430985] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.431094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.458381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.458386] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.458540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.458723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.459725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.459871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.461173] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.485534] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.490413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.490539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.491014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.491163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.491182] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.491311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.491807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.492312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.492870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.494057] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.494842] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.495609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.495763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.495897] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.496027] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.496619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.496787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.496804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.496925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.497982] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.498107] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.498805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.499296] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.499301] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.499413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<6> [222.518831] [IGT] i915_pm_rpm: finished subtest module-reload, FAIL

<6> [222.519122] [IGT] i915_pm_rpm: exiting, ret=98

<7> [222.528947] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.528954] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.529097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.529370] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

<7> [222.529395] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1]

<7> [222.529556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.530014] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.530149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1

<7> [222.530164] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2]

<7> [222.530283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.530795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.531260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.531869] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [222.533003] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

<7> [222.533958] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000

<7> [222.534728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [222.534882] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.535054] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.535180] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.535772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.535935] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1

<7> [222.535950] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1]

<7> [222.536068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.537158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.537269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.538453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [222.539010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.539014] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.539179] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [222.567615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [222.567620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [222.567734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.567867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1

Results for igt@i915_pm_rpm@module-reload