igt@kms_force_connector_basic@force-connector-state on fi-ilk-650@linus-v6.5-rc3 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-g354c536a4 (x86_64) (Linux: 6.5.0-rc3-linus-v6.5-rc3-g6eaae1980760+ x86_64)
Out	Opened device: /dev/dri/card0 Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.123s)
Err	Starting subtest: force-connector-state Subtest force-connector-state: SUCCESS (0.123s)
Dmesg	<6> [129.018283] Console: switching to colour dummy device 80x25 <6> [129.018845] [IGT] kms_force_connector_basic: executing <7> [129.073480] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.074584] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [129.074990] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.076438] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.076523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.076616] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.076971] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.077246] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.078101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.078382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.078933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.079208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.079218] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.079522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.080531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.080542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.081064] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.081097] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.081108] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.081117] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.081127] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.081136] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.081208] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.081240] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.081548] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.081834] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.082333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.082639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.083124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.083401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.083409] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.083713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.084776] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.084786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.085169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.085200] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.085209] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.085217] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.085225] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.085234] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.085332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.085363] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.085771] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.086054] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.086553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.086832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.087328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.087630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.087638] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.087920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.088910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.088920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.089297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.089325] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.089334] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.089342] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.089350] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.089358] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [129.089837] [IGT] kms_force_connector_basic: starting subtest force-connector-state <7> [129.096639] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.096680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.097222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.097504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.097986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.098262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.098273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.098579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.099583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.099593] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.099876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.100810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] <7> [129.100844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.101137] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected <7> [129.101701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.101737] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.102021] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.102293] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.102956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.103229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.103728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.104003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.104012] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.104284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.105384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.105393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.105816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.105847] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.105858] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.105866] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.105875] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.105883] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.105924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.105955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.106453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.106761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.107245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.107547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.107556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.107833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.108835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.108845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.109119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.109180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] <7> [129.109210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.109518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected <7> [129.143850] [drm:drm_mode_setcrtc] [CRTC:45:pipe A] <7> [129.143967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [129.144284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [129.144597] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [129.144880] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no) <7> [129.145165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0) <7> [129.145447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0) <7> [129.145754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000) <7> [129.146039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [129.146323] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0) <7> [129.146626] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0) <7> [129.146911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0) <7> [129.147194] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0) <7> [129.147479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0) <7> [129.147782] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0) <7> [129.148062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0) <7> [129.148303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0) <7> [129.148518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0) <7> [129.148712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0) <7> [129.148905] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0) <7> [129.149097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0) <7> [129.149289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0) <7> [129.149481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0) <7> [129.149705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0) <7> [129.149899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0) <7> [129.150091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0) <7> [129.150283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0) <7> [129.150561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0) <7> [129.150851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0) <7> [129.151104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0) <7> [129.151334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0) <7> [129.151549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0) <7> [129.151743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0) <7> [129.151935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [129.152128] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [129.152320] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [129.152531] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [129.152725] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0) <7> [129.152917] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0) <7> [129.153109] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0) <7> [129.153302] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [129.153515] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A <7> [129.153746] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [129.153941] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [129.154139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset] <7> [129.154332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no <7> [129.154720] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [129.178976] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A] <7> [129.179187] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A <7> [129.179589] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [129.179835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [129.180024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [129.180212] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [129.180409] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.180642] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [129.180932] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [129.181143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.181583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.181788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.182126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.182324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.182687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.182886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.183292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.183490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.183967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.184166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.184498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.184725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.185069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.185266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.185624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.185823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.186143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.186348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.186717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.186922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.187243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.187449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.187745] [drm:drm_mode_setcrtc] [CRTC:60:pipe B] <7> [129.187854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.188062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.188391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.188616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.188955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.189152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.189533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.189731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.190046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.190243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.190596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.190796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.191116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.191314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.191674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.191872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.192191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.192388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.192754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.192953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.193266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.193462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.194090] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing <7> [129.194102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.194394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.194876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.195060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.195425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.195698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.195722] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.195946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.196856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.196872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.197054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.197340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.197361] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.197369] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.197374] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.197379] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.197385] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.197438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.197591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.198027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.198209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.198549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.198748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.198762] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.198946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.199874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.199889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.200070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.200342] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.200362] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.200368] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.200372] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.200377] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.200382] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.200635] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing <7> [129.200644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.200665] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] status updated from connected to disconnected <7> [129.201080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] disconnected <7> [129.201459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.201488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] disconnected <7> [129.201830] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing <7> [129.201843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.201876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.202195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.202476] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.202828] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.203118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.203440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] status updated from disconnected to connected <7> [129.203864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.204390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.204694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.205171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.205454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.205465] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.205763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.206752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.206765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.207048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.207449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.207488] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.207500] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.207510] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.207541] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.207552] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.207646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.207681] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.207981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.208265] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.208560] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.208835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.209154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.209644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.209917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.210394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.210818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.210827] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.211091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.212031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.212039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.212223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.212508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.212554] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.212566] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.212573] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.212580] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.212588] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <6> [129.213034] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS <7> [129.213246] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [129.214023] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.214039] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.214078] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.214432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.214691] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.214935] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.215120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.215341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.215781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.215965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.216331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.216514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.216522] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.216780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.217733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.217741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.217924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.218213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.218239] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.218247] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.218253] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.218258] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.218263] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.218329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.218351] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.218577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.218860] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.219046] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.219230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.219445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.220020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.220203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.220615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.220834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.220841] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.221024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.221923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.221930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.222111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.222388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.222410] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.222416] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.222421] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.222426] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.222431] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.222636] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset <7> [129.222701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.222734] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.222941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.223134] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.223318] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.223501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.223802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.224253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.224434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.224894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.225079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.225084] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.225267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.226165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.226173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.226354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.226687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.226718] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.226728] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.226735] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.226743] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.226750] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.227046] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [129.227057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.227079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.227276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.228064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.228248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.228619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.228804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.228811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.228990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.229888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.229896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.230082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.230291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.230357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.230378] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.230629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.231189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.231371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.231761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.231945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.231951] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.232129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.233021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.233028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.233211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.233417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.233605] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset <7> [129.233640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.233661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.233853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.234252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.234433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.234826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.235010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.235016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.235194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.236089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.236096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.236279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.236483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.236708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset <7> [129.236737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] <7> [129.236758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.236954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.237164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.237372] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected <6> [129.238228] [IGT] kms_force_connector_basic: exiting, ret=0 <7> [129.238816] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing <7> [129.238827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.238856] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.239075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.239268] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1 <7> [129.239453] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.239692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.239926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.240317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.240499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.240900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.241192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.241202] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.241405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.242322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.242329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.242511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.242846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.242868] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.242876] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.242881] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.242886] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.242892] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.242964] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing <7> [129.242972] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.242994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.243188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.243577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.243777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.244145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.244328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.244334] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.244513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.245420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.245428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.245641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [129.245862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.246193] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc] <7> [129.246741] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36) <7> [129.246952] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1 <7> [129.247142] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [129.247337] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [129.247531] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [129.247772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [129.248022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes) <7> [129.248216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1) <7> [129.248409] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288) <7> [129.248662] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002) <7> [129.248894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [129.249087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024) <7> [129.249280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344) <7> [129.249473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024) <7> [129.249720] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344) <7> [129.249927] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048) <7> [129.250120] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184) <7> [129.250313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768) <7> [129.250506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806) <7> [129.250728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768) <7> [129.250949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806) <7> [129.251143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771) <7> [129.251336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777) <7> [129.251529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024) <7> [129.251758] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344) <7> [129.251969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024) <7> [129.252170] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344) <7> [129.252375] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048) <7> [129.252593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184) <7> [129.252805] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768) <7> [129.252999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806) <7> [129.253192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768) <7> [129.253385] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806) <7> [129.253704] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771) <7> [129.253916] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777) <7> [129.254110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [129.254303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [129.254496] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [129.254721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [129.254977] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800) <7> [129.255172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800) <7> [129.255365] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800) <7> [129.255584] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [129.255832] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz) <7> [129.256030] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz <7> [129.256224] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [129.256419] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A <7> [129.256636] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A <7> [129.256855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset] <7> [129.257050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB <7> [129.257243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [129.257436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [129.257657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [129.257868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [129.258061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [129.258254] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64 <7> [129.258448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [129.258676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [129.258890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [129.259084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.259278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.259472] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [129.259687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.259903] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa <7> [129.260098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800 <7> [129.260291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0 <7> [129.260483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [129.260721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [129.260930] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09 <7> [129.261122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [129.261314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [129.261507] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [129.261738] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.261953] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.262146] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [129.262339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [129.262534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [129.262746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0 <7> [129.262962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no <7> [129.263156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no <7> [129.263488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [129.263789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT] <7> [129.263981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C] <7> [129.264224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C] <7> [129.264520] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.264849] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B <7> [129.265580] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [129.266232] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100 <7> [129.266514] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done. <7> [129.266979] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600 <7> [129.267264] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done. <7> [129.267545] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done <7> [129.267857] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A] <7> [129.268140] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A <7> [129.320052] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1] <7> [129.320308] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A] <7> [129.320540] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A <7> [129.320962] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [129.321017] [drm:drm_client_modeset_probe] <7> [129.321714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] <7> [129.321801] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1 <7> [129.322155] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1 <7> [129.322424] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug <7> [129.323239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.323430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry <7> [129.323837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1) <7> [129.324035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.324045] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.324238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1 <7> [129.325224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga <7> [129.325235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0 <7> [129.325778] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes : <7> [129.325810] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [129.325818] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [129.325823] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [129.325828] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [129.325833] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [129.325840] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] <7> [129.325861] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1] <7> [129.326253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.326435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [129.326842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [129.327027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.327033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [129.327212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [129.328105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [129.328113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [129.328300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected <7> [129.328322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] <7> [129.328342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1] <7> [129.328541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected <7> [129.328562] [drm:drm_client_modeset_probe] connector 61 enabled? yes <7> [129.328567] [drm:drm_client_modeset_probe] connector 64 enabled? no <7> [129.328571] [drm:drm_client_modeset_probe] connector 72 enabled? no <7> [129.328716] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [129.328740] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61 <7> [129.328745] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0 <7> [129.328749] [drm:drm_client_modeset_probe] found mode 1024x768 <7> [129.328752] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config <7> [129.328794] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0) <6> [129.353859] Console: switching to colour frame buffer device 128x48

<6> [129.018283] Console: switching to colour dummy device 80x25

<6> [129.018845] [IGT] kms_force_connector_basic: executing

<7> [129.073480] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.074584] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [129.074990] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.076438] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.076523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.076616] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.076971] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.077246] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.078101] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.078382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.078933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.079208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.079218] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.079522] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.080531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.080542] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.081064] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.081097] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.081108] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.081117] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.081127] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.081136] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.081208] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.081240] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.081548] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.081834] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.082333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.082639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.083124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.083401] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.083409] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.083713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.084776] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.084786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.085169] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.085200] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.085209] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.085217] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.085225] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.085234] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.085332] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.085363] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.085771] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.086054] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.086553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.086832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.087328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.087630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.087638] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.087920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.088910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.088920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.089297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.089325] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.089334] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.089342] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.089350] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.089358] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [129.089837] [IGT] kms_force_connector_basic: starting subtest force-connector-state

<7> [129.096639] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.096680] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.097222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.097504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.097986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.098262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.098273] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.098579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.099583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.099593] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.099876] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.100810] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]

<7> [129.100844] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.101137] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected

<7> [129.101701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.101737] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.102021] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.102293] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.102956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.103229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.103728] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.104003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.104012] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.104284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.105384] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.105393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.105816] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.105847] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.105858] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.105866] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.105875] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.105883] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.105924] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.105955] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.106453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.106761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.107245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.107547] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.107556] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.107833] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.108835] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.108845] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.109119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.109180] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]

<7> [129.109210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.109518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected

<7> [129.143850] [drm:drm_mode_setcrtc] [CRTC:45:pipe A]

<7> [129.143967] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [129.144284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [129.144597] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [129.144880] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected yes, found no)

<7> [129.145165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 1, found 0)

<7> [129.145447] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 64 data 6039797/8388608 link 125829/524288, found tu 0, data 0/0 link 0/0)

<7> [129.145754] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000002, found 0x00000000)

<7> [129.146039] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [129.146323] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1024, found 0)

<7> [129.146626] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 1344, found 0)

<7> [129.146911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1024, found 0)

<7> [129.147194] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 1344, found 0)

<7> [129.147479] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1048, found 0)

<7> [129.147782] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 1184, found 0)

<7> [129.148062] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 768, found 0)

<7> [129.148303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 806, found 0)

<7> [129.148518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 768, found 0)

<7> [129.148712] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 806, found 0)

<7> [129.148905] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 771, found 0)

<7> [129.149097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 777, found 0)

<7> [129.149289] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1024, found 0)

<7> [129.149481] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 1344, found 0)

<7> [129.149705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1024, found 0)

<7> [129.149899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 1344, found 0)

<7> [129.150091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1048, found 0)

<7> [129.150283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 1184, found 0)

<7> [129.150561] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 768, found 0)

<7> [129.150851] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 806, found 0)

<7> [129.151104] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 768, found 0)

<7> [129.151334] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 806, found 0)

<7> [129.151549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 771, found 0)

<7> [129.151743] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 777, found 0)

<7> [129.151935] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [129.152128] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [129.152320] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [129.152531] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [129.152725] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 64800, found 0)

<7> [129.152917] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 64800, found 0)

<7> [129.153109] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 64800, found 0)

<7> [129.153302] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [129.153515] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:45:pipe A] releasing PCH DPLL A

<7> [129.153746] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [129.153941] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [129.154139] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: no [modeset]

<7> [129.154332] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [NOFB], visible: no

<7> [129.154720] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [129.178976] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable PCH DPLL A (active 0x1, on? 1) for [CRTC:45:pipe A]

<7> [129.179187] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling PCH DPLL A

<7> [129.179589] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [129.179835] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [129.180024] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [129.180212] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [129.180409] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.180642] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [129.180932] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [129.181143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.181583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.181788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.182126] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.182324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.182687] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.182886] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.183292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.183490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.183967] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.184166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.184498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.184725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.185069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.185266] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.185624] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.185823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.186143] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.186348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.186717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.186922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.187243] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.187449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.187745] [drm:drm_mode_setcrtc] [CRTC:60:pipe B]

<7> [129.187854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.188062] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.188391] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.188616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.188955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.189152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.189533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.189731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.190046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.190243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.190596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.190796] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.191116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.191314] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.191674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.191872] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.192191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.192388] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.192754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.192953] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.193266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.193462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.194090] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 2 or reprobing

<7> [129.194102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.194394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.194876] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.195060] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.195425] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.195698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.195722] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.195946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.196856] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.196872] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.197054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.197340] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.197361] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.197369] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.197374] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.197379] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.197385] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.197438] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.197591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.198027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.198209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.198549] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.198748] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.198762] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.198946] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.199874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.199889] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.200070] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.200342] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.200362] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.200368] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.200372] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.200377] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.200382] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.200635] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 2 to 1 or reprobing

<7> [129.200644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.200665] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] status updated from connected to disconnected

<7> [129.201080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] disconnected

<7> [129.201459] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.201488] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] disconnected

<7> [129.201830] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 1 to 0 or reprobing

<7> [129.201843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.201876] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.202195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.202476] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.202828] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.203118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.203440] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] status updated from disconnected to connected

<7> [129.203864] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.204390] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.204694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.205171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.205454] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.205465] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.205763] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.206752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.206765] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.207048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.207449] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.207488] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.207500] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.207510] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.207541] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.207552] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.207646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.207681] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.207981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.208265] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.208560] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.208835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.209154] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.209644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.209917] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.210394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.210818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.210827] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.211091] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.212031] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.212039] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.212223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.212508] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.212554] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.212566] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.212573] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.212580] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.212588] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<6> [129.213034] [IGT] kms_force_connector_basic: finished subtest force-connector-state, SUCCESS

<7> [129.213246] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [129.214023] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.214039] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.214078] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.214432] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.214691] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.214935] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.215120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.215341] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.215781] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.215965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.216331] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.216514] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.216522] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.216780] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.217733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.217741] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.217924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.218213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.218239] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.218247] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.218253] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.218258] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.218263] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.218329] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.218351] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.218577] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.218860] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.219046] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.219230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.219445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.220020] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.220203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.220615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.220834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.220841] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.221024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.221923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.221930] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.222111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.222388] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.222410] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.222416] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.222421] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.222426] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.222431] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.222636] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:61:VGA-1] EDID override reset

<7> [129.222701] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.222734] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.222941] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.223134] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.223318] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.223501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.223802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.224253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.224434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.224894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.225079] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.225084] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.225267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.226165] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.226173] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.226354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.226687] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.226718] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.226728] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.226735] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.226743] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.226750] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.227046] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [129.227057] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.227079] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.227276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.228064] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.228248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.228619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.228804] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.228811] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.228990] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.229888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.229896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.230082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.230291] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.230357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.230378] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.230629] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.231189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.231371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.231761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.231945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.231951] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.232129] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.233021] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.233028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.233211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.233417] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.233605] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:64:HDMI-A-1] EDID override reset

<7> [129.233640] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.233661] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.233853] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.234252] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.234433] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.234826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.235010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.235016] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.235194] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.236089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.236096] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.236279] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.236483] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.236708] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:72:DP-1] EDID override reset

<7> [129.236737] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]

<7> [129.236758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.236954] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.237164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.237372] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected

<6> [129.238228] [IGT] kms_force_connector_basic: exiting, ret=0

<7> [129.238816] [drm:status_store] [CONNECTOR:61:VGA-1] force updated from 0 to 0 or reprobing

<7> [129.238827] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.238856] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.239075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.239268] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1

<7> [129.239453] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.239692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.239926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.240317] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.240499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.240900] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.241192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.241202] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.241405] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.242322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.242329] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.242511] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.242846] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.242868] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.242876] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.242881] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.242886] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.242892] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.242964] [drm:status_store] [CONNECTOR:64:HDMI-A-1] force updated from 0 to 0 or reprobing

<7> [129.242972] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.242994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.243188] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.243577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.243777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.244145] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.244328] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.244334] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.244513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.245420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.245428] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.245641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [129.245862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.246193] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]

<7> [129.246741] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:61:VGA-1] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 0, max platform bpp 36)

<7> [129.246952] i915 0000:00:02.0: [drm:ilk_fdi_compute_config [i915]] checking fdi config on pipe A, lanes 1

<7> [129.247142] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:45:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [129.247337] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [129.247531] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [129.247772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [129.248022] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in has_pch_encoder (expected no, found yes)

<7> [129.248216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_lanes (expected 0, found 1)

<7> [129.248409] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in fdi_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6039797/8388608 link 125829/524288)

<7> [129.248662] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000002)

<7> [129.248894] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [129.249087] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1024)

<7> [129.249280] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 1344)

<7> [129.249473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1024)

<7> [129.249720] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 1344)

<7> [129.249927] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1048)

<7> [129.250120] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 1184)

<7> [129.250313] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 768)

<7> [129.250506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 806)

<7> [129.250728] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 768)

<7> [129.250949] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 806)

<7> [129.251143] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 771)

<7> [129.251336] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 777)

<7> [129.251529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1024)

<7> [129.251758] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 1344)

<7> [129.251969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1024)

<7> [129.252170] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 1344)

<7> [129.252375] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1048)

<7> [129.252593] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 1184)

<7> [129.252805] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 768)

<7> [129.252999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 806)

<7> [129.253192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 768)

<7> [129.253385] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 806)

<7> [129.253704] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 771)

<7> [129.253916] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 777)

<7> [129.254110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [129.254303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [129.254496] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [129.254721] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [129.254977] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 64800)

<7> [129.255172] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 64800)

<7> [129.255365] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:45:pipe A] fastset requirement not met in port_clock (expected 0, found 64800)

<7> [129.255584] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [129.255832] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:primary A] min cdclk (64800 kHz) > [CRTC:45:pipe A] min cdclk (0 kHz)

<7> [129.256030] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 450000 kHz, actual 450000 kHz

<7> [129.256224] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [129.256419] i915 0000:00:02.0: [drm:ibx_get_dpll [i915]] [CRTC:45:pipe A] using pre-allocated PCH DPLL A

<7> [129.256636] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:45:pipe A] reserving PCH DPLL A

<7> [129.256855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:45:pipe A] enable: yes [modeset]

<7> [129.257050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: ANALOG (0x2), output format: RGB, sink format: RGB

<7> [129.257243] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [129.257436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [129.257657] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [129.257868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [129.258061] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [129.258254] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] fdi: lanes: 1; data_m: 6039797, data_n: 8388608, link_m: 125829, link_n: 524288, tu: 64

<7> [129.258448] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [129.258676] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [129.258890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [129.259084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.259278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.259472] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [129.259687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1024x768": 60 64800 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.259903] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=64800, hd=1024 hb=1024-1344 hs=1048-1184 ht=1344, vd=768 vb=768-806 vs=771-777 vt=806, flags=0xa

<7> [129.260098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 64800, pipe src: 1024x768+0+0, pixel rate 64800

<7> [129.260291] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 0, ips linetime: 0

<7> [129.260483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [129.260721] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [129.260930] i915 0000:00:02.0: [drm:ibx_dump_hw_state [i915]] dpll_hw_state: dpll: 0x84100010, dpll_md: 0x0, fp0: 0x10c09, fp1: 0x10c09

<7> [129.261122] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x3 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [129.261314] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [129.261507] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [129.261738] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.261953] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.262146] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [129.262339] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:primary A] fb: [FB:77] 1024x768 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [129.262534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [129.262746] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1024.000000x768.000000+0.000000+0.000000 dst: 1024x768+0+0

<7> [129.262962] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:35:sprite A] fb: [NOFB], visible: no

<7> [129.263156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:41:cursor A] fb: [NOFB], visible: no

<7> [129.263488] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [129.263789] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:62:CRT]

<7> [129.263981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:63:HDMI C]

<7> [129.264224] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:71:DP C]

<7> [129.264520] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.264849] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL B

<7> [129.265580] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [129.266232] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x100

<7> [129.266514] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 1 done.

<7> [129.266979] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI_RX_IIR 0x600

<7> [129.267264] i915 0000:00:02.0: [drm:ilk_fdi_link_train [i915]] FDI train 2 done.

<7> [129.267545] i915 0000:00:02.0: [drm:ilk_pch_enable [i915]] FDI train done

<7> [129.267857] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable PCH DPLL A (active 0x1, on? 0) for [CRTC:45:pipe A]

<7> [129.268140] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling PCH DPLL A

<7> [129.320052] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:61:VGA-1]

<7> [129.320308] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:45:pipe A]

<7> [129.320540] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] PCH DPLL A

<7> [129.320962] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [129.321017] [drm:drm_client_modeset_probe]

<7> [129.321714] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1]

<7> [129.321801] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] [CONNECTOR:61:VGA-1] force=1

<7> [129.322155] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1

<7> [129.322424] i915 0000:00:02.0: [drm:intel_crt_detect [i915]] CRT detected via hotplug

<7> [129.323239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.323430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK on first message, retry

<7> [129.323837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)

<7> [129.324035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.324045] i915 0000:00:02.0: [drm:intel_crt_get_edid [i915]] CRT GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.324238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus vga. force bit now 1

<7> [129.325224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga

<7> [129.325235] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus vga. force bit now 0

<7> [129.325778] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:61:VGA-1] probed modes :

<7> [129.325810] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [129.325818] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [129.325823] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [129.325828] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [129.325833] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [129.325840] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1]

<7> [129.325861] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:64:HDMI-A-1]

<7> [129.326253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.326435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [129.326842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)

<7> [129.327027] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.327033] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [129.327212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1

<7> [129.328105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc

<7> [129.328113] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0

<7> [129.328300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:64:HDMI-A-1] disconnected

<7> [129.328322] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1]

<7> [129.328342] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:72:DP-1]

<7> [129.328541] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:72:DP-1] disconnected

<7> [129.328562] [drm:drm_client_modeset_probe] connector 61 enabled? yes

<7> [129.328567] [drm:drm_client_modeset_probe] connector 64 enabled? no

<7> [129.328571] [drm:drm_client_modeset_probe] connector 72 enabled? no

<7> [129.328716] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [129.328740] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 61

<7> [129.328745] [drm:drm_client_modeset_probe] looking for preferred mode on connector 61 0

<7> [129.328749] [drm:drm_client_modeset_probe] found mode 1024x768

<7> [129.328752] [drm:drm_client_modeset_probe] picking CRTCs for 1024x768 config

<7> [129.328794] [drm:drm_client_modeset_probe] desired mode 1024x768 set on crtc 45 (0,0)

<6> [129.353859] Console: switching to colour frame buffer device 128x48

Results for igt@kms_force_connector_basic@force-connector-state