Results for igt@kms_force_connector_basic@prune-stale-modes

Result: Pass

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

DetailValue
Igt-Version 
IGT-Version: 1.27.1-g354c536a4 (x86_64) (Linux: 6.5.0-rc3-linus-v6.5-rc3-g6eaae1980760+ x86_64)
Out 
Opened device: /dev/dri/card0
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Err 
Starting subtest: prune-stale-modes
Subtest prune-stale-modes: SUCCESS (0.023s)
Dmesg
<6> [170.499423] Console: switching to colour dummy device 80x25
<6> [170.499709] [IGT] kms_force_connector_basic: executing
<7> [170.502299] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [170.503253] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [170.503488] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [170.504081] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [170.504092] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504113] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.504357] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504373] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504543] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.504598] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504611] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.504772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [170.505077] [IGT] kms_force_connector_basic: starting subtest prune-stale-modes
<7> [170.505205] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [170.505212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.505227] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.505639] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.505776] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.506130] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.506268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.506280] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.506776] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.512304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.512315] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.512962] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] status updated from disconnected to connected
<7> [170.513115] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [170.513129] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [170.513135] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [170.513140] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [170.513144] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [170.513147] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [170.513190] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.513205] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.513599] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.513734] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.514078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.514208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.514217] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.514387] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.518888] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.518899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.519099] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [170.519115] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [170.519121] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [170.519124] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [170.519128] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [170.519131] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [170.519343] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [170.519367] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.519384] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.519550] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [170.519555] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [170.519793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [170.519922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.520248] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [170.520387] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [170.520490] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [170.520496] [drm:drm_mode_prune_invalid] Not using 800x600 mode: STALE
<7> [170.520502] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [170.520506] [drm:drm_mode_prune_invalid] Not using 848x480 mode: STALE
<7> [170.520513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [170.520527] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [170.520531] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
<7> [170.520535] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [170.520539] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [170.520542] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [170.520545] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [170.520677] i915 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:194:HDMI-A-1] EDID override set
<7> [170.520705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.520720] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.520884] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD monitor IGT
<7> [170.520888] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:194:HDMI-A-1] ELD size 24, SAD count 0
<7> [170.520893] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 4
<7> [170.521134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [170.521264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.521621] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [170.521748] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [170.521839] [drm:drm_mode_debug_printmodeline] Modeline "1400x1050": 60 101000 1400 1448 1480 1560 1050 1053 1057 1080 0x48 0xa
<7> [170.521844] [drm:drm_mode_prune_invalid] Not using 1400x1050 mode: STALE
<7> [170.521851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [170.521866] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [170.521870] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [170.521873] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [170.521877] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [170.521880] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [170.521984] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [170.522007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.522022] i915 0000:00:02.0: [drm:intel_hdmi_force [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.522402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.522536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [170.522863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [170.522987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.522995] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [170.523116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [170.527550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [170.527559] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [170.527691] i915 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:194:HDMI-A-1] EDID changed, epoch counter 5
<7> [170.527752] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [170.527757] [drm:drm_mode_prune_invalid] Not using 1920x1080 mode: STALE
<7> [170.527763] [drm:drm_mode_debug_printmodeline] Modeline "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [170.527767] [drm:drm_mode_prune_invalid] Not using 1280x720 mode: STALE
<7> [170.527773] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] probed modes :
<7> [170.527788] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [170.527792] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [170.527796] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [170.527799] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [170.527802] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [170.527946] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [170.527953] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.527969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.528129] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] status updated from connected to disconnected
<7> [170.528152] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.528287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.528302] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.528502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<6> [170.528847] [IGT] kms_force_connector_basic: finished subtest prune-stale-modes, SUCCESS
<7> [170.528978] i915 0000:00:02.0: [drm:i915_gem_open [i915]]
<7> [170.529503] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [170.529511] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [170.529529] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [170.530356] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.530497] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [170.531099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [170.531233] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [170.531390] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [170.531523] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [170.531674] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [170.531682] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [170.531687] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [170.531691] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [170.531709] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [170.531848] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.532540] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.532683] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.533405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [170.533423] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [170.533429] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [170.533477] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [170.533492] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [170.534262] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.534456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [170.535037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [170.535171] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [170.535297] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [170.535431] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [170.535576] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [170.535583] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [170.535586] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [170.535590] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [170.535605] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [170.535730] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.536502] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.536665] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.537419] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [170.537438] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [170.537445] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [170.537573] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:185:eDP-1] EDID override reset
<7> [170.537595] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [170.537611] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [170.538493] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.538656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [170.539256] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [170.539524] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [170.539671] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [170.539806] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [170.539960] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [170.539968] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [170.539972] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [170.539975] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [170.539992] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [170.540124] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.540949] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.541089] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.541766] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [170.541784] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [170.541791] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [170.541969] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [170.541977] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.541995] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.542171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.542222] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.542237] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.542509] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.542625] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:194:HDMI-A-1] EDID override reset
<7> [170.542646] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.542660] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.542820] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.542925] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:203:DP-1] EDID override reset
<7> [170.542943] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1]
<7> [170.542958] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [170.543131] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1] disconnected
<7> [170.543239] i915 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:212:DP-2] EDID override reset
<7> [170.543257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2]
<7> [170.543271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [170.543458] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2] disconnected
<6> [170.544017] [IGT] kms_force_connector_basic: exiting, ret=0
<7> [170.544133] [drm:status_store] [CONNECTOR:194:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [170.544141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.544157] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.544343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.544400] [drm:status_store] [CONNECTOR:185:eDP-1] force updated from 0 to 0 or reprobing
<7> [170.544405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [170.544420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [170.545209] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.545378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [170.545973] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [170.546103] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [170.546230] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [170.546368] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [170.546519] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [170.546526] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [170.546530] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [170.546534] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [170.546550] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [170.546678] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.547442] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.547571] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.548258] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [170.548274] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [170.548279] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [170.548498] i915 0000:00:02.0: [drm:i915_drop_caches_set [i915]] Dropping caches: 0x000001dc [0x000001dc]
<7> [170.568546] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]
<7> [170.568564] [drm:drm_client_modeset_probe]
<7> [170.568599] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1]
<7> [170.568614] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:185:eDP-1]
<7> [170.569361] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.569515] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0
<7> [170.570142] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:184:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes
<7> [170.570299] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [170.570504] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [170.570646] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [170.570816] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [170.570825] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [170.570829] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD monitor
<7> [170.570833] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:185:eDP-1] ELD size 20, SAD count 0
<7> [170.570853] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] VRR capable: no
<7> [170.570993] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [170.571768] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [170.571912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:185:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [170.572604] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:185:eDP-1] probed modes :
<7> [170.572623] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [170.572629] [drm:drm_mode_debug_printmodeline] Modeline "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [170.572635] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1]
<7> [170.572650] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:194:HDMI-A-1]
<7> [170.572821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:194:HDMI-A-1] disconnected
<7> [170.572837] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1]
<7> [170.572850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:203:DP-1]
<7> [170.573020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:203:DP-1] disconnected
<7> [170.573034] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2]
<7> [170.573047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:212:DP-2]
<7> [170.573213] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:212:DP-2] disconnected
<7> [170.573228] [drm:drm_client_modeset_probe] connector 185 enabled? yes
<7> [170.573232] [drm:drm_client_modeset_probe] connector 194 enabled? no
<7> [170.573235] [drm:drm_client_modeset_probe] connector 203 enabled? no
<7> [170.573237] [drm:drm_client_modeset_probe] connector 212 enabled? no
<7> [170.573266] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [170.573277] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 185
<7> [170.573280] [drm:drm_client_modeset_probe] looking for preferred mode on connector 185 0
<7> [170.573282] [drm:drm_client_modeset_probe] found mode 3840x2160
<7> [170.573285] [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [170.573302] [drm:drm_client_modeset_probe] desired mode 3840x2160 set on crtc 80 (0,0)
<6> [170.601923] Console: switching to colour frame buffer device 480x135
Created at 2023-07-24 00:13:10