<5>[ 0.000000] Linux version 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 16 22:35:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca41fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca42000-0x000000006fdb9fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdba000-0x000000006fee0fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee1000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe16000 SMBIOS=0x6cb19000 MEMATTR=0x67f8f018 ESRT=0x67b9f198 TPMEventLog=0x67ead018 <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000016] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000020] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000390] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000393] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000395] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000396] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000399] esrt: Reserving ESRT space from 0x0000000067b9f198 to 0x0000000067b9f310. <7>[ 0.000404] e820: update [mem 0x67b9f000-0x67b9ffff] usable ==> reserved <6>[ 0.000423] Using GB pages for direct mapping <6>[ 0.001181] printk: log_buf_len: 1048576 bytes <6>[ 0.001183] printk: early log buf free: 259064(98%) <6>[ 0.001184] Secure boot disabled <6>[ 0.001186] ACPI: Early table checksum verification disabled <6>[ 0.001189] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001192] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001198] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001201] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001203] ACPI: FACS 0x000000006FDFB000 000040 <6>[ 0.001206] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001210] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001212] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001215] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001217] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001221] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001223] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001226] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001228] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001230] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001232] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001235] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001237] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001239] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001241] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001243] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001246] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001248] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001250] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001252] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001254] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001259] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001261] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001263] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001265] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001267] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001270] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001272] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001274] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001276] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001278] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001281] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001283] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001285] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001287] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001289] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001292] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001294] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001296] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001297] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001298] ACPI: Reserving FACS table memory at [mem 0x6fdfb000-0x6fdfb03f] <6>[ 0.001298] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001299] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001301] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001302] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001303] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001305] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001305] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001306] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001307] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001308] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001309] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001310] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001310] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001311] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001311] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001312] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001313] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001313] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001314] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001315] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001315] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001316] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001316] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001317] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001318] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001318] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001319] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001320] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001321] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001322] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001322] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001323] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001323] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001336] Setting APIC routing to cluster x2apic. <6>[ 0.045574] Zone ranges: <6>[ 0.045576] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045578] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045580] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045581] Movable zone start for each node <6>[ 0.045582] Early memory node ranges <6>[ 0.045582] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045583] node 0: [mem 0x0000000000100000-0x000000006ca41fff] <6>[ 0.045584] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045585] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045587] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045590] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045615] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048034] On node 0, zone DMA32: 13757 pages in unavailable ranges <6>[ 0.090213] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090604] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090610] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090655] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090657] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090659] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090661] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090662] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090670] e820: update [mem 0x67fa8000-0x67fc2fff] usable ==> reserved <6>[ 0.090677] TSC deadline timer available <6>[ 0.090678] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090687] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090688] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090689] PM: hibernation: Registered nosave memory: [mem 0x67b9f000-0x67b9ffff] <6>[ 0.090690] PM: hibernation: Registered nosave memory: [mem 0x67fa8000-0x67fc2fff] <6>[ 0.090691] PM: hibernation: Registered nosave memory: [mem 0x6ca42000-0x6fdb9fff] <6>[ 0.090692] PM: hibernation: Registered nosave memory: [mem 0x6fdba000-0x6fee0fff] <6>[ 0.090692] PM: hibernation: Registered nosave memory: [mem 0x6fee1000-0x6fffefff] <6>[ 0.090693] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090694] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090694] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090695] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090697] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090701] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093886] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095359] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095364] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095366] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095371] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095377] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095389] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095450] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095483] random: crng init done <6>[ 0.098289] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099671] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099772] Built 1 zonelists, mobility grouping on. Total pages: 8177209 <6>[ 0.099775] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099776] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100501] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100515] software IO TLB: area num 32. <6>[ 0.752825] Memory: 32435060K/33228676K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793360K reserved, 0K cma-reserved) <4>[ 0.752828] ********************************************************** <4>[ 0.752829] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.752829] ** ** <4>[ 0.752830] ** This system shows unhashed kernel memory addresses ** <4>[ 0.752830] ** via the console, logs, and other interfaces. This ** <4>[ 0.752831] ** might reduce the security of your system. ** <4>[ 0.752831] ** ** <4>[ 0.752832] ** If you see this message and you are not debugging ** <4>[ 0.752832] ** the kernel, report this immediately to your system ** <4>[ 0.752832] ** administrator! ** <4>[ 0.752833] ** ** <4>[ 0.752833] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.752834] ********************************************************** <6>[ 0.753001] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.753448] Dynamic Preempt: full <6>[ 0.753671] Running RCU self tests <6>[ 0.753672] Running RCU synchronous self tests <6>[ 0.753714] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.753715] rcu: RCU lockdep checking is enabled. <6>[ 0.753716] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.753716] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.753717] Trampoline variant of Tasks RCU enabled. <6>[ 0.753718] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.753719] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.753783] Running RCU synchronous self tests <6>[ 0.757579] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.757941] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.758270] Console: colour dummy device 80x25 <6>[ 0.758283] printk: console [tty1] enabled <6>[ 0.760265] printk: console [ttyS0] enabled <4>[ 2.230898] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.238564] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.242628] ... MAX_LOCK_DEPTH: 48 <4>[ 2.246775] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.251098] ... CLASSHASH_SIZE: 4096 <4>[ 2.255420] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.259828] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.264319] ... CHAINHASH_SIZE: 65536 <4>[ 2.268724] memory used by lock dependency info: 9461 kB <4>[ 2.274076] memory used for stack traces: 8320 kB <4>[ 2.278828] per task-struct memory footprint: 1920 bytes <6>[ 2.284191] ACPI: Core revision 20230331 <6>[ 2.289036] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.298142] APIC: Switch to symmetric I/O mode setup <6>[ 2.303121] DMAR: Host address width 42 <6>[ 2.306967] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.312297] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.321037] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.326354] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.335097] DMAR: SATC flags: 0x1 <6>[ 2.338432] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.344772] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.350163] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.360485] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.370469] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.381054] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.391483] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.392543] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.393481] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.394668] process: using mwait in idle threads <6>[ 2.395484] CET detected: Indirect Branch Tracking enabled <6>[ 2.396482] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.397480] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.398484] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.399485] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.400481] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.401485] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.402485] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.403495] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.404483] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.405481] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.406482] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.407484] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.408481] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.409481] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.422184] Freeing SMP alternatives memory: 36K <6>[ 2.422483] pid_max: default: 32768 minimum: 301 <6>[ 2.432044] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.432538] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.434026] Running RCU synchronous self tests <6>[ 2.434482] Running RCU synchronous self tests <6>[ 2.435651] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.436939] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.437517] Running RCU-tasks wait API self tests <6>[ 2.547493] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.548603] core: cpu_core PMU driver: <6>[ 2.549482] ... version: 5 <6>[ 2.550481] ... bit width: 48 <6>[ 2.553478] ... generic registers: 8 <6>[ 2.554481] ... value mask: 0000ffffffffffff <6>[ 2.555496] ... max period: 00007fffffffffff <6>[ 2.556482] ... fixed-purpose events: 4 <6>[ 2.557481] ... event mask: 0000000f000000ff <6>[ 2.558539] signal: max sigframe size: 3632 <6>[ 2.559499] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.560555] rcu: Hierarchical SRCU implementation. <6>[ 2.561481] rcu: Max phase no-delay instances is 400. <6>[ 2.564584] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.566060] smp: Bringing up secondary CPUs ... <6>[ 2.566786] smpboot: x86: Booting SMP configuration: <6>[ 2.567491] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.614394] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.614394] ... version: 5 <6>[ 1.614394] ... bit width: 48 <6>[ 1.614394] ... generic registers: 8 <6>[ 1.614394] ... value mask: 0000ffffffffffff <6>[ 1.614394] ... max period: 00007fffffffffff <6>[ 1.614394] ... fixed-purpose events: 3 <6>[ 1.614394] ... event mask: 00000007000000ff <4>[ 2.623767] #1 #3 #5 #7 #9 #11 <6>[ 2.629484] smp: Brought up 1 node, 22 CPUs <6>[ 2.631481] smpboot: Max logical packages: 1 <6>[ 2.632481] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.638662] devtmpfs: initialized <6>[ 2.640507] ACPI: PM: Registering ACPI NVS region [mem 0x6fdba000-0x6fee0fff] (1208320 bytes) <6>[ 2.641946] Running RCU synchronous self tests <6>[ 2.642496] Running RCU synchronous self tests <6>[ 2.643548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.644493] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.645758] pinctrl core: initialized pinctrl subsystem <6>[ 2.646933] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.648659] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.648661] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.649483] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.650539] cpuidle: using governor menu <6>[ 2.652549] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.653741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.654494] PCI: not using MMCONFIG <6>[ 2.655490] PCI: Using configuration type 1 for base access <4>[ 2.657849] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.659540] Callback from call_rcu_tasks() invoked. <6>[ 2.660536] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.669503] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.675493] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.682667] cryptd: max_cpu_qlen set to 1000 <6>[ 2.703509] raid6: avx2x4 gen() 56806 MB/s <6>[ 2.725294] raid6: avx2x2 gen() 56088 MB/s <6>[ 2.746298] raid6: avx2x1 gen() 55891 MB/s <6>[ 2.750480] raid6: using algorithm avx2x4 gen() 56806 MB/s <6>[ 2.771862] raid6: .... xor() 9217 MB/s, rmw enabled <6>[ 2.776482] raid6: using avx2x2 recovery algorithm <6>[ 2.781771] ACPI: Added _OSI(Module Device) <6>[ 2.786483] ACPI: Added _OSI(Processor Device) <6>[ 2.790481] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.795482] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.186962] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.205161] ACPI: EC: EC started <6>[ 3.208475] ACPI: EC: interrupt blocked <6>[ 3.216727] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.221483] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.488878] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 5.094553] ACPI: Interpreter enabled <6>[ 5.098598] ACPI: PM: (supports S0 S4 S5) <6>[ 5.102485] ACPI: Using IOAPIC for interrupt routing <6>[ 5.107632] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.146162] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.154501] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.163487] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.193885] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.194473] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.246549] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.370386] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.381699] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.403577] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.415090] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.432677] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.443767] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.455355] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.466009] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.530874] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.535757] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.540759] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.832499] ACPI: \_TZ_.FN00: New power resource <6>[ 5.838005] ACPI: \_TZ_.FN01: New power resource <6>[ 5.842995] ACPI: \_TZ_.FN02: New power resource <6>[ 5.847997] ACPI: \_TZ_.FN03: New power resource <6>[ 5.853003] ACPI: \_TZ_.FN04: New power resource <6>[ 5.861058] ACPI: \PIN_: New power resource <6>[ 5.867819] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.873494] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.885627] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.897595] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.913337] PCI host bridge to bus 0000:00 <6>[ 5.917485] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.924488] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.931485] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 5.938487] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 5.945486] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 5.953488] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 5.967811] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 5.973991] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 5.979498] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 5.987496] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 5.994527] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 5.999486] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 6.008531] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 6.014511] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 6.020500] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 6.028563] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 6.034493] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 6.041503] pci 0000:00:05.0: enabling Extended Tags <6>[ 6.047237] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 6.053616] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 6.063442] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 6.069717] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 6.078990] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 6.084707] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 6.094937] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 6.100500] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 6.107851] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.113492] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 6.120515] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.125673] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.131493] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.138499] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 6.146861] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.152501] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 6.159560] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.166929] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.172500] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 6.179496] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 6.186547] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.190481] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.198569] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.204497] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 6.211545] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.218617] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.225499] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 6.232559] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.239128] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.245501] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 6.252497] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 6.259753] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.265530] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.273763] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.279531] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.287713] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.293534] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.301704] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.307530] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.315716] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.321505] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 6.328574] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.335591] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.341495] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.347488] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 6.353768] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.359530] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.367072] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.372533] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.380706] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.387693] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.393526] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 6.400539] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 6.408607] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.413838] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.420505] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 6.427510] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.433505] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.439517] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.445771] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.452509] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 6.458633] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.465636] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.471544] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 6.479363] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.484489] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 6.490607] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.495507] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.502508] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.510620] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.515506] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.522503] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.530523] pci_bus 0000:00: on NUMA node 0 <6>[ 9.385152] Low-power S0 idle used by default for system suspend <6>[ 9.765768] ACPI: EC: interrupt unblocked <6>[ 9.769475] ACPI: EC: event unblocked <6>[ 9.772480] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.777679] ACPI: EC: GPE=0x6e <6>[ 9.781614] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.788648] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.796506] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.805169] SCSI subsystem initialized <7>[ 9.808634] libata version 3.00 loaded. <6>[ 9.808634] ACPI: bus type USB registered <6>[ 9.812656] usbcore: registered new interface driver usbfs <6>[ 9.818658] usbcore: registered new interface driver hub <6>[ 9.823531] usbcore: registered new device driver usb <6>[ 9.829696] efivars: Registered efivars operations <6>[ 9.834599] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.841029] PCI: Using ACPI for IRQ routing <7>[ 9.863186] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.863336] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.872641] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.872651] e820: reserve RAM buffer [mem 0x67b9f000-0x67ffffff] <7>[ 9.872655] e820: reserve RAM buffer [mem 0x67fa8000-0x67ffffff] <7>[ 9.872658] e820: reserve RAM buffer [mem 0x6ca42000-0x6fffffff] <7>[ 9.872661] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.872758] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.873473] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.873473] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.892487] vgaarb: loaded <6>[ 9.895669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.901485] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.909604] clocksource: Switched to clocksource tsc-early <6>[ 9.915858] pnp: PnP ACPI init <6>[ 9.920123] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.926010] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.932735] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 9.940516] system 00:03: [io 0x06a4] has been reserved <6>[ 9.945805] system 00:03: [io 0x06a0] has been reserved <6>[ 9.970440] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 9.977004] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.983904] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 9.990806] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 9.997363] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.004265] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.011166] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.018068] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.029152] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.036141] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.046256] pnp: PnP ACPI: found 8 devices <6>[ 10.060553] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.069566] NET: Registered PF_INET protocol family <6>[ 10.074687] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.084235] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.093176] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.100857] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.109093] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.119195] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.126055] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.133570] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.141520] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.147159] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.155519] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.163901] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 10.169943] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 10.175985] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 10.183605] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 10.191242] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 10.198866] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 10.206490] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 10.214109] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 10.221727] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 10.228481] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.233409] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 10.240139] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.245343] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.251407] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 10.258154] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.266184] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.271388] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.277448] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 10.284195] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.292230] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.298354] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.304479] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.311291] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 10.318098] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.325341] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 10.331552] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.337072] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 10.343280] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.350778] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.356298] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 10.362508] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.371056] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.378263] PCI: CLS 0 bytes, default 64 <6>[ 10.382229] DMAR: No RMRR found <6>[ 10.385362] DMAR: No ATSR found <6>[ 10.388486] DMAR: IOMMU feature nest inconsistent <6>[ 10.388488] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.393161] DMAR: dmar0: Using Queued invalidation <6>[ 10.403119] DMAR: dmar1: Using Queued invalidation <6>[ 10.408850] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.414224] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.419286] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.424336] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.429389] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.434467] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.439540] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.444589] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.449638] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.454694] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.459769] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.464902] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.470048] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.475209] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.480339] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.485524] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.490658] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.495795] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.500931] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.506094] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.511223] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.516388] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.521520] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.526715] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.531853] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.536990] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.542132] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.547265] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.552413] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.558468] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.564854] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.571238] software IO TLB: mapped [mem 0x00000000635c2000-0x00000000675c2000] (64MB) <6>[ 10.579406] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.587266] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.592961] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.598571] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.604183] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.611472] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.621431] clocksource: Switched to clocksource tsc <6>[ 10.626444] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.644942] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.653700] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.661459] NET: Registered PF_ALG protocol family <6>[ 10.666227] xor: measuring software checksum speed <6>[ 10.671204] prefetch64-sse : 43976 MB/sec <6>[ 10.675764] generic_sse : 42206 MB/sec <6>[ 10.680087] xor: using function: prefetch64-sse (43976 MB/sec) <6>[ 10.685910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.693243] io scheduler mq-deadline registered <6>[ 10.697736] io scheduler kyber registered <6>[ 10.703128] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.709942] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.715850] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.730650] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.736548] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.750494] efifb: probing for efifb <6>[ 10.754072] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 10.760889] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 10.767014] efifb: scrolling: redraw <6>[ 10.770563] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 10.780214] Console: switching to colour frame buffer device 360x112 <6>[ 10.790193] fb0: EFI VGA frame buffer device <6>[ 10.795132] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 10.800001] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 10.811501] ACPI: button: Lid Switch [LID0] <6>[ 10.815826] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.824210] ACPI: button: Sleep Button [SLPB] <6>[ 10.828660] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.837132] ACPI: button: Power Button [PWRB] <6>[ 10.907418] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.913058] ACPI: thermal: Thermal Zone [TZ00] (34 C) <6>[ 10.918628] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.919372] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.930255] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.930578] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.939055] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 10.950389] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 10.957481] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 10.966353] Non-volatile memory driver v1.3 <6>[ 10.970627] Linux agpgart interface v0.103 <6>[ 11.006536] ACPI: bus type drm_connector registered <6>[ 11.021966] loop: module loaded <6>[ 11.025714] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.026311] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.032325] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.037335] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.050486] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.060192] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.065389] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.071951] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.072712] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.085541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.093751] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.100919] usb usb1: Product: xHCI Host Controller <6>[ 11.105764] usb usb1: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.113970] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.119114] hub 1-0:1.0: USB hub found <6>[ 11.122886] hub 1-0:1.0: 1 port detected <6>[ 11.123874] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.129036] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.137763] nvme0n1: p1 p2 <6>[ 11.140139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.140140] usb usb2: Product: xHCI Host Controller <6>[ 11.140141] usb usb2: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.163401] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.168377] hub 2-0:1.0: USB hub found <6>[ 11.172257] hub 2-0:1.0: 4 ports detected <6>[ 11.193513] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.198717] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.207233] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.216907] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.222107] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.229504] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.236665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.244924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.252146] usb usb3: Product: xHCI Host Controller <6>[ 11.256991] usb usb3: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.265249] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.270239] hub 3-0:1.0: USB hub found <6>[ 11.274068] hub 3-0:1.0: 12 ports detected <6>[ 11.299121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.307576] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.314819] usb usb4: Product: xHCI Host Controller <6>[ 11.319677] usb usb4: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.328190] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.333125] hub 4-0:1.0: USB hub found <6>[ 11.337408] hub 4-0:1.0: 2 ports detected <6>[ 11.344744] usbcore: registered new interface driver usb-storage <6>[ 11.351187] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.358192] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.069776] i8042: Can't read CTR while initializing i8042 <4>[ 12.075232] i8042: probe of i8042 failed with error -5 <6>[ 12.080485] mousedev: PS/2 mouse device common for all mice <6>[ 12.086443] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.092772] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.097601] rtc_cmos rtc_cmos: setting system clock to 1998-01-15T21:15:17 UTC (884898917) <6>[ 12.105889] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.112869] IR JVC protocol handler initialized <6>[ 12.117375] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.123163] IR NEC protocol handler initialized <6>[ 12.127665] IR RC5(x/sz) protocol handler initialized <6>[ 12.132692] IR RC6 protocol handler initialized <6>[ 12.137192] IR SANYO protocol handler initialized <6>[ 12.142657] IR Sharp protocol handler initialized <6>[ 12.148231] IR Sony protocol handler initialized <6>[ 12.153695] IR XMP protocol handler initialized <6>[ 12.160299] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.169546] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.177768] device-mapper: uevent: version 1.0.3 <6>[ 12.183438] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.192603] intel_pstate: Intel P-state driver initializing <6>[ 12.202695] intel_pstate: HWP enabled <6>[ 12.208910] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.217069] sdhci: Copyright(c) Pierre Ossman <6>[ 12.231090] pstore: Registered efi_pstore as persistent store backend <6>[ 12.239612] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.248441] usbcore: registered new interface driver usbhid <6>[ 12.256326] usbhid: USB HID core driver <6>[ 12.263495] pci 0000:00:08.0: Setting to D3hot <6>[ 12.282000] pci 0000:00:05.0: Setting to D3hot <6>[ 12.285944] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.298594] pci 0000:00:0b.0: Setting to D3hot <6>[ 12.313994] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.318917] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 12.322225] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 12.328328] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 12.335019] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.335029] usb 4-1: Manufacturer: Realtek <6>[ 12.335036] usb 4-1: SerialNumber: 000001 <6>[ 12.384576] intel_pmc_core INT33A1:00: initialized <6>[ 12.394488] intel_rapl_msr: PL4 support detected. <6>[ 12.405075] intel_rapl_common: Found RAPL domain package <6>[ 12.415240] intel_rapl_common: Found RAPL domain core <6>[ 12.425294] intel_rapl_common: Found RAPL domain uncore <6>[ 12.435230] intel_rapl_common: Found RAPL domain psys <6>[ 12.456297] Initializing XFRM netlink socket <6>[ 12.465950] NET: Registered PF_INET6 protocol family <6>[ 12.490036] Segment Routing with IPv6 <6>[ 12.497869] In-situ OAM (IOAM) with IPv6 <6>[ 12.506845] mip6: Mobile IPv6 <6>[ 12.514554] NET: Registered PF_PACKET protocol family <6>[ 12.524258] NET: Registered PF_KEY protocol family <6>[ 12.584288] IPI shorthand broadcast: enabled <6>[ 12.593342] AVX2 version of gcm_enc/dec engaged. <6>[ 12.603108] AES CTR mode by8 optimization enabled <6>[ 12.701424] sched_clock: Marking stable (11088013779, 1613394423)->(13080558634, -379150432) <6>[ 12.716562] registered taskstats version 1 <6>[ 12.838875] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.872944] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.882531] pstore: Using crash dump compression: deflate <6>[ 12.912138] clk: Disabling unused clocks <6>[ 12.921128] ALSA device list: <6>[ 12.929070] No soundcards found. <6>[ 12.939657] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 13.720030] EXT4-fs (nvme0n1p2): mounted filesystem fec10944-567b-487d-898f-2dff9231051e ro with ordered data mode. Quota mode: disabled. <6>[ 13.737613] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 13.752952] devtmpfs: mounted <6>[ 13.764225] Freeing unused kernel image (initmem) memory: 2564K <6>[ 13.775253] Write protecting the kernel read-only data: 22528k <6>[ 13.787737] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 13.799191] Run /sbin/init as init process <7>[ 13.808205] with arguments: <7>[ 13.808224] /sbin/init <7>[ 13.808241] 3 <7>[ 13.808251] with environment: <7>[ 13.808260] HOME=/ <7>[ 13.808270] TERM=linux <7>[ 13.808280] BOOT_IMAGE=/boot/drm_intel <7>[ 14.091218] systemd[1]: System time before build time, advancing clock. <7>[ 14.430010] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.462766] systemd[1]: Detected architecture x86-64. <7>[ 14.506857] systemd[1]: Set hostname to . <6>[ 14.731238] cat (190) used greatest stack depth: 13128 bytes left <6>[ 14.740948] friendly-recove (187) used greatest stack depth: 13040 bytes left <6>[ 14.750387] mkdir (193) used greatest stack depth: 12568 bytes left <6>[ 14.866159] systemd-run-gen (201) used greatest stack depth: 12168 bytes left <7>[ 15.703960] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.721950] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.746998] systemd[1]: Created slice system-modprobe.slice. <7>[ 15.771936] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.796712] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.820495] systemd[1]: Created slice User and Session Slice. <7>[ 15.843227] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.867064] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.884138] systemd[1]: Reached target Remote File Systems. <7>[ 15.903800] systemd[1]: Reached target Slices. <7>[ 15.922491] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 15.950352] systemd[1]: Listening on Syslog Socket. <7>[ 15.969462] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 15.992745] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 16.053635] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 16.068584] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 16.090951] systemd[1]: Listening on Journal Socket. <7>[ 16.110767] systemd[1]: Listening on udev Control Socket. <7>[ 16.131972] systemd[1]: Listening on udev Kernel Socket. <7>[ 16.185863] systemd[1]: Mounting Huge Pages File System... <7>[ 16.244766] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 16.301467] systemd[1]: Mounting Kernel Debug File System... <7>[ 16.355383] systemd[1]: Mounting Kernel Trace File System... <7>[ 16.413584] systemd[1]: Starting Journal Service... <7>[ 16.459859] systemd[1]: Starting Set the console keyboard layout... <7>[ 16.507608] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 16.530989] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 16.545638] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 16.586716] systemd[1]: Starting File System Check on Root Device... <7>[ 16.641666] systemd[1]: Starting Load Kernel Modules... <7>[ 16.688318] systemd[1]: Starting udev Coldplug all Devices... <7>[ 16.712965] systemd[1]: Starting Uncomplicated firewall... <7>[ 16.735019] systemd[1]: Started Journal Service. <6>[ 17.766714] EXT4-fs (nvme0n1p2): re-mounted fec10944-567b-487d-898f-2dff9231051e r/w. Quota mode: disabled. <6>[ 17.906908] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 18.000695] systemd-journald[215]: Received client request to flush runtime journal. <5>[ 18.014763] systemd-journald[215]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 19.227455] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 19.275867] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 19.276102] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 19.308181] pps_core: LinuxPPS API ver. 1 registered <6>[ 19.308194] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 19.824563] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 19.824610] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 19.850183] PTP clock support registered <6>[ 19.857289] usbcore: registered new device driver r8152-cfgselector <6>[ 19.881814] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 19.881827] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 19.886096] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 19.910937] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 19.911310] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 20.007716] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 20.044532] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 20.081753] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 20.087268] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 20.117885] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 20.118310] usbcore: registered new interface driver r8152 <6>[ 20.133563] usbcore: registered new interface driver cdc_ether <6>[ 20.139270] usbcore: registered new interface driver r8153_ecm <6>[ 20.158874] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 20.159083] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 20.159229] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 20.178639] e1000e 0000:00:1f.6 eno0: renamed from eth1 <6>[ 20.388881] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 20.389904] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0 <4>[ 20.687018] ********************************************************** <4>[ 20.687024] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.687029] ** ** <4>[ 20.687034] ** trace_printk() being used. Allocating extra memory. ** <4>[ 20.687039] ** ** <4>[ 20.687043] ** This means that this is a DEBUG kernel and it is ** <4>[ 20.687048] ** unsafe for production use. ** <4>[ 20.687053] ** ** <4>[ 20.687058] ** If you see this message and you are not debugging ** <4>[ 20.687063] ** the kernel, report this immediately to your vendor! ** <4>[ 20.687068] ** ** <4>[ 20.687072] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.687076] ********************************************************** <6>[ 20.934377] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 20.938286] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.938944] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 20.939205] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 20.939233] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 20.939461] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 20.939695] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 20.939895] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.940239] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 20.941436] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 20.941933] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 20.943167] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 20.943748] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 20.945652] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 20.946235] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 20.946877] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 20.948673] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 20.949218] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 20.949603] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 20.949924] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 20.954594] Console: switching to colour dummy device 80x25 <6>[ 20.966318] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 20.967357] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 20.967436] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 20.968158] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 20.968672] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 20.969078] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 20.970671] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0d018 <7>[ 20.971493] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 20.972126] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 20.972794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 20.973426] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 20.973997] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 20.974643] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 20.975181] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 20.975809] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 20.976371] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 20.977243] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 20.978087] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 20.978984] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 20.979798] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.980501] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.981110] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 20.981766] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.982572] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.983369] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 20.984582] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.985892] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.986946] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 20.989102] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.989865] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.990673] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 20.991364] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.992067] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.992881] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 20.993562] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 20.994191] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 20.996110] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 20.996961] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 20.997810] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 20.998535] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 20.999200] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 20.999953] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 21.000775] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 21.001457] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 21.002074] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 21.002764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 21.003507] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 21.004219] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 21.004999] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 21.005914] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 21.006622] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 21.007330] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 21.008121] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 21.008777] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 21.009393] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 21.010075] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 21.010975] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.012494] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 21.013077] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.013731] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.014350] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 21.015034] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.015763] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 21.016454] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.017081] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 21.017788] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.018378] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 21.019082] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.019962] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 21.020668] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.021309] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 21.021987] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.022621] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 21.023296] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 21.024228] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.025259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 21.026165] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.027321] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.028448] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 21.029258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 21.030144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 21.031030] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.031857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 21.032590] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 21.032686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 21.033438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 21.034160] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 21.034955] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 21.035918] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 21.041026] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6>[ 21.043594] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <7>[ 21.043915] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <6>[ 21.052266] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 21.052156] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 21.053148] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 21.054509] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 21.055051] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 21.055498] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 21.055859] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 21.099149] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 21.109652] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.112543] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 21.113257] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 21.114236] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 21.115073] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 21.115965] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 21.116893] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 21.117870] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 21.118652] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 21.119538] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 21.120183] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 21.121079] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 21.121765] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 21.122305] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 21.123126] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 21.124023] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.124660] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.125255] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.125897] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.126416] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.126987] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.127909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.131159] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.132513] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 21.136189] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.137038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 21.137931] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 21.138930] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 21.140852] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 21.144009] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.144378] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 21.154527] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.154568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.154578] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.154686] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.156013] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 21.157503] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 21.158034] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 21.158506] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 21.159200] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.160093] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.160927] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.161576] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.162241] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.163038] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.164442] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 21.165129] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.167088] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.167682] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 21.168694] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 21.170053] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.171127] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.172727] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 21.173662] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 21.174822] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 21.175756] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.176547] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 21.177713] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 21.180568] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.181666] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.183201] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 21.184292] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.185555] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.188945] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 21.190702] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 21.192326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 21.193947] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 21.195032] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 21.195946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 21.196792] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 21.197716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 21.198569] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 21.199326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 21.200146] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 21.201186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 21.202462] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 21.203287] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 21.204120] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 21.204852] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 21.205494] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 21.206099] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 21.206857] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 21.207592] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 21.208262] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 21.209775] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 21.210602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 21.211324] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 21.212130] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 21.212887] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 21.213625] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 21.214285] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 21.215980] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 21.216830] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 21.217653] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.218452] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.219189] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 21.219976] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.220731] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.221384] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 21.222061] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 21.222797] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.223576] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 21.224513] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 21.225309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 21.226118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.226883] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.227640] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.228336] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.229525] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 21.230286] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 21.230985] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.231652] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.232205] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.232755] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.233359] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 21.234092] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 21.234820] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 21.235555] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 21.236186] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.236832] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.237576] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.238305] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.239112] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 21.239820] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 21.240474] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.241074] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.241788] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.242452] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.243644] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 21.244379] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 21.245164] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 21.245928] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 21.246662] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 21.247250] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 21.248010] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 21.248986] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 21.249621] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 21.250238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 21.250967] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 21.251678] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 21.252306] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 21.253049] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 21.253993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 21.254825] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 21.255556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 21.256220] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 21.256946] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 21.257663] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 21.258288] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 21.259340] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 21.260173] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 21.260903] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 21.261613] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 21.262246] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 21.263072] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 21.263813] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 21.264770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 21.265476] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 21.266102] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 21.266732] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 21.267296] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 21.267912] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 21.268486] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 21.270037] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 21.270886] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.271785] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 21.272520] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.273253] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.274098] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.274821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.275733] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 21.276520] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.277355] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.278174] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 21.278963] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.279632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.280330] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.281043] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.281790] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.282641] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.283465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.284224] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.284934] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.285583] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.286271] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.287045] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 21.287993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 21.289018] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.289975] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.290932] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.291870] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.292797] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.293709] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.294604] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.295502] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.296349] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.297279] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.298205] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.299273] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 21.300254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 21.301219] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 21.302676] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 21.303738] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.304725] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.305645] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.307977] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 21.308952] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 21.325093] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 21.355841] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 21.356866] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 21.357765] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 21.358887] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 21.358903] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 21.358916] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 21.358974] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 21.363532] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 21.364502] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 21.365445] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 21.370670] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 21.371939] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 21.375637] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 21.376690] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 21.383218] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.384557] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 21.385750] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 21.392830] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 21.510236] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 21.511463] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 21.512531] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 21.513562] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 21.514582] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 21.515535] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 21.516461] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 21.517319] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 21.518275] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 21.519327] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 21.520268] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 21.521187] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 21.522082] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 21.522948] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 21.525913] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 21.538903] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.542006] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 21.546035] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 21.546057] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 21.547253] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 21.571639] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 21.571712] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 21.574235] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 21.575264] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 21.577732] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 21.578649] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 21.580879] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 21.581774] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 21.587528] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.588732] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 21.589951] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <6>[ 21.592519] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 21.722356] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 21.723887] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 21.725250] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 21.726637] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 21.727935] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 21.729187] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 21.730483] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 21.731667] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 21.732859] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 21.734021] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 21.735162] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 21.736323] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 21.737510] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 21.738590] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 21.739674] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 21.743060] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 21.743085] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 21.761628] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 16ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.763169] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 21.772485] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 21.774381] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 21.774457] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 21.774860] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 21.783981] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.785854] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.787212] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.788770] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 21.789973] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 21.790927] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 21.792022] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 21.792767] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 21.793693] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 21.794621] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 21.795999] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 21.797301] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 21.798387] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 21.799331] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 21.800353] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 21.801344] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 21.802277] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 21.803161] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 21.804088] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.804884] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.805718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.806471] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.807143] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.807852] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.808691] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.809371] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.810220] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.811078] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.811905] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.812592] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.813339] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.814157] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.814954] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.815788] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.816488] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.817150] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.817894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.818756] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.819611] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.820250] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.820981] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.821767] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 21.822759] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 21.822781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 21.823918] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.824987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 21.826075] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.827148] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.828202] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.829313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.830295] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 21.831301] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.832280] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.833359] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 21.834168] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 21.834187] i915 0000:00:02.0: pixelformat: RGB <7>[ 21.834200] i915 0000:00:02.0: colorimetry: sRGB <7>[ 21.834211] i915 0000:00:02.0: bpc: 0 <7>[ 21.834222] i915 0000:00:02.0: dynamic range: VESA range <7>[ 21.834234] i915 0000:00:02.0: content type: Not defined <7>[ 21.834246] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.835090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.836028] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.836973] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.837909] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.838852] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.839781] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.840704] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.841527] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.842212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.843110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.844007] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 21.844889] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 21.845743] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.846472] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.847150] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.847897] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.848703] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.849461] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.850213] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.851004] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.851834] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.852551] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.853334] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.854092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 21.854800] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 21.855480] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 21.856295] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 21.857015] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 21.857638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 21.860543] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <7>[ 22.067627] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 22.070822] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 22.080200] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 22.080942] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 22.081478] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 22.132675] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.134172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 22.136547] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 22.137686] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 22.138720] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 22.139667] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 22.140565] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 22.141437] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 22.142264] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 22.143144] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 22.144031] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 22.144903] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 22.145745] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 22.146551] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 22.147321] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 22.148155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 22.148979] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 22.149816] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 22.150625] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 22.151381] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 22.152204] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 22.153003] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 22.153787] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 22.154594] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 22.155353] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 22.156252] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.157593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 22.159711] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 22.160933] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 22.161940] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 22.755751] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 22.757183] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.758555] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 22.759833] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <6>[ 22.836113] r8152 4-1:1.0 enxe2015072f33f: carrier on <7>[ 22.960790] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.964473] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 22.965621] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 22.969844] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 22.970549] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 22.972054] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 22.973775] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 22.974552] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 22.976217] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 22.976577] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 22.978953] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 22.979290] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 22.980302] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 22.980957] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 22.981281] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 22.981728] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 22.992178] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.994175] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.995549] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.998709] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.999723] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.000731] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.001698] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.002555] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.003339] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.004196] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.005085] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.005971] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.006822] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.007706] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 23.008867] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 23.010906] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 23.013667] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 23.014862] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 23.015928] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 23.016928] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 23.017893] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 23.018980] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 23.022835] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 23.023734] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 23.024631] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 23.025322] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 23.026089] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 23.026788] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 23.060261] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 23.061923] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 23.066139] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 23.068021] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 23.070972] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 23.072570] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 23.074110] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 23.077152] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 23.078759] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 23.080333] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 23.084298] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 23.086109] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 23.089470] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 23.089706] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 23.101739] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 23.182257] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 23.201756] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 23.215104] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 23.216711] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 23.218486] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 23.222005] [drm:drm_client_modeset_probe] <7>[ 23.221885] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 23.223023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.223386] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.223513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 23.224478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 23.225329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 23.228551] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 23.229168] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 23.229180] i915 device info: graphics version: 12.71 <7>[ 23.229187] i915 device info: media version: 13 <7>[ 23.229193] i915 device info: display version: 14 <7>[ 23.229199] i915 device info: graphics stepping: B0 <7>[ 23.229209] i915 device info: media stepping: C0 <7>[ 23.229218] i915 device info: display stepping: C0 <7>[ 23.229226] i915 device info: base die stepping: ** <7>[ 23.229233] i915 device info: gt: 0 <7>[ 23.229238] i915 device info: memory-regions: 0x41 <7>[ 23.229242] i915 device info: page-sizes: 0x211000 <7>[ 23.229253] i915 device info: platform: METEORLAKE <7>[ 23.229261] i915 device info: ppgtt-size: 48 <7>[ 23.229270] i915 device info: ppgtt-type: 2 <7>[ 23.229277] i915 device info: dma_mask_size: 46 <7>[ 23.229285] i915 device info: is_mobile: no <7>[ 23.229290] i915 device info: is_lp: no <7>[ 23.229295] i915 device info: require_force_probe: yes <7>[ 23.229299] i915 device info: is_dgfx: no <7>[ 23.229303] i915 device info: has_64bit_reloc: yes <7>[ 23.229308] i915 device info: has_64k_pages: no <7>[ 23.229312] i915 device info: gpu_reset_clobbers_display: no <7>[ 23.229316] i915 device info: has_reset_engine: yes <7>[ 23.229320] i915 device info: has_3d_pipeline: yes <7>[ 23.229325] i915 device info: has_4tile: yes <7>[ 23.229329] i915 device info: has_flat_ccs: no <7>[ 23.229333] i915 device info: has_global_mocs: yes <7>[ 23.229337] i915 device info: has_gmd_id: yes <7>[ 23.229341] i915 device info: has_gt_uc: yes <7>[ 23.229345] i915 device info: has_heci_pxp: no <7>[ 23.229350] i915 device info: has_heci_gscfi: no <7>[ 23.229354] i915 device info: has_guc_deprivilege: yes <7>[ 23.229358] i915 device info: has_l3_ccs_read: no <7>[ 23.229362] i915 device info: has_l3_dpf: no <7>[ 23.229367] i915 device info: has_llc: no <7>[ 23.229371] i915 device info: has_logical_ring_contexts: yes <7>[ 23.229375] i915 device info: has_logical_ring_elsq: yes <7>[ 23.229379] i915 device info: has_media_ratio_mode: no <7>[ 23.229383] i915 device info: has_mslice_steering: no <7>[ 23.229387] i915 device info: has_oa_bpc_reporting: yes <7>[ 23.229391] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 23.229412] i915 device info: has_oam: yes <7>[ 23.229416] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 23.229420] i915 device info: has_pxp: yes <7>[ 23.229425] i915 device info: has_rc6: yes <7>[ 23.229429] i915 device info: has_rc6p: no <7>[ 23.229435] i915 device info: has_rps: yes <7>[ 23.229439] i915 device info: has_runtime_pm: yes <7>[ 23.229443] i915 device info: has_snoop: yes <7>[ 23.229447] i915 device info: has_coherent_ggtt: no <7>[ 23.229451] i915 device info: tuning_thread_rr_after_dep: no <7>[ 23.229456] i915 device info: unfenced_needs_alignment: no <7>[ 23.229460] i915 device info: hws_needs_physical: no <7>[ 23.229464] i915 device info: has_pooled_eu: no <7>[ 23.229468] i915 device info: cursor_needs_physical: no <7>[ 23.229472] i915 device info: has_cdclk_crawl: yes <7>[ 23.229476] i915 device info: has_cdclk_squash: yes <7>[ 23.229480] i915 device info: has_ddi: yes <7>[ 23.229484] i915 device info: has_dp_mst: yes <7>[ 23.229489] i915 device info: has_dsb: yes <7>[ 23.229493] i915 device info: has_fpga_dbg: yes <7>[ 23.229498] i915 device info: has_gmch: no <7>[ 23.229502] i915 device info: has_hotplug: yes <7>[ 23.229507] i915 device info: has_hti: no <7>[ 23.229511] i915 device info: has_ipc: yes <7>[ 23.229516] i915 device info: has_overlay: no <7>[ 23.229521] i915 device info: has_psr: yes <7>[ 23.229525] i915 device info: has_psr_hw_tracking: no <7>[ 23.229530] i915 device info: overlay_needs_physical: no <7>[ 23.229293] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.229535] i915 device info: supports_tv: no <7>[ 23.229540] i915 device info: has_hdcp: yes <7>[ 23.229544] i915 device info: has_dmc: yes <7>[ 23.229548] i915 device info: has_dsc: yes <7>[ 23.229551] i915 device info: rawclk rate: 38400 kHz <7>[ 23.229556] i915 device info: iommu: enabled <7>[ 23.229561] i915 device info: available engines: 400003 <7>[ 23.229566] i915 device info: subslice total: 8 <7>[ 23.229570] i915 device info: geometry dss mask=00000000,000000ff <7>[ 23.229576] i915 device info: compute dss mask=00000000,000000ff <7>[ 23.229580] i915 device info: EU total: 128 <7>[ 23.229584] i915 device info: EU per subslice: 16 <7>[ 23.229587] i915 device info: has slice power gating: no <7>[ 23.229591] i915 device info: has subslice power gating: no <7>[ 23.229595] i915 device info: has EU power gating: no <7>[ 23.229598] i915 device info: available engines: 41400 <7>[ 23.229602] i915 device info: subslice total: 8 <7>[ 23.229606] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 23.229610] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 23.229614] i915 device info: EU total: 128 <7>[ 23.229617] i915 device info: EU per subslice: 16 <7>[ 23.229620] i915 device info: has slice power gating: no <7>[ 23.229623] i915 device info: has subslice power gating: no <7>[ 23.229626] i915 device info: has EU power gating: no <6>[ 23.229630] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 23.229634] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 23.229637] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 23.229845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.231458] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.231859] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.232211] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.232562] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.233167] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.233189] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.233202] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.233297] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.233885] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.235597] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.236032] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.237374] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 23.238310] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.238346] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.238361] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.238391] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.239313] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 23.239389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.239496] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.239553] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.240379] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 23.240518] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.240601] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.240663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.241947] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 23.242038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.242115] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.242177] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.243373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 23.243534] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.243628] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.243702] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.244660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 23.244759] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.244849] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.244919] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.245969] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 23.246067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.246154] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.246178] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.246194] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.246208] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.246221] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.246234] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.246248] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.246695] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.246784] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.246802] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.246817] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.246832] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 23.246892] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.247183] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 23.247380] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 23.266631] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 23.270427] fbcon: i915drmfb (fb0) is primary device <7>[ 23.277458] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 23.278688] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 23.279666] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 23.280488] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 23.281222] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 23.281939] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 23.282882] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 23.283945] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 23.284770] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 23.285568] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 23.286251] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 23.286940] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 23.287614] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 23.288561] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 23.289373] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.290255] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 23.291370] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 23.292554] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 23.293604] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 23.295024] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 23.296621] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 23.298187] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 23.299794] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 23.301212] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 23.302636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 23.303903] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 23.305298] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 23.306788] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 23.308194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 23.309260] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 23.309272] i915 0000:00:02.0: pixelformat: RGB <7>[ 23.309279] i915 0000:00:02.0: colorimetry: sRGB <7>[ 23.309286] i915 0000:00:02.0: bpc: 0 <7>[ 23.309292] i915 0000:00:02.0: dynamic range: VESA range <7>[ 23.309300] i915 0000:00:02.0: content type: Not defined <7>[ 23.309308] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 23.310241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.311132] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.312130] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.313185] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 23.314233] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 23.315257] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 23.316247] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 23.317227] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 23.318193] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 23.319146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 23.320072] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 23.321155] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 23.322207] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 23.323191] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.324163] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.325102] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.326035] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.326950] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.327859] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.328748] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.329629] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.330521] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.331393] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.332710] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 23.333920] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 23.335156] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 23.336532] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 23.337629] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 23.338516] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 23.339357] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 23.340285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 23.342931] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 23.344394] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 23.345481] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 23.346386] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 23.347227] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 23.348202] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 23.349173] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 23.350090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 23.350829] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 23.351671] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 23.352495] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 23.353273] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 23.354001] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 23.354742] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 23.355575] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 23.356354] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 23.357198] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 23.358010] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 23.358704] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 23.359357] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 23.360192] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 23.360973] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 23.361643] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 23.369890] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 23.374614] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.375149] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 23.377350] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 23.378435] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.379359] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.380317] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.381230] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.382053] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.382780] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.383576] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.384283] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.385120] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.385999] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 23.390776] Console: switching to colour frame buffer device 360x112 <6>[ 23.421790] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 23.444924] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.445045] [drm:drm_client_modeset_probe] <7>[ 23.445899] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.446002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.448779] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.449531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.449664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 23.450350] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 23.451203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.451662] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.451978] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.452278] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.452847] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.452861] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.452867] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.452921] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.453234] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.454569] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.454870] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.456117] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.456179] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.456195] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.456235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.456958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.456991] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.457016] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.457463] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.457502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.457540] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.458276] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.458319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.458362] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.458955] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.458990] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.459024] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.459510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.459538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.459566] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.459964] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.459993] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.460001] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.460005] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.460008] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.460012] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.460015] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.460018] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.460286] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.460344] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.460352] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.460358] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.460364] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.460493] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.483454] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.483607] [drm:drm_client_modeset_probe] <7>[ 23.483783] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.483859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.486528] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.486913] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.488684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.489020] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.489336] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.489656] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.490005] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.490015] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.490021] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.490056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.490344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.494245] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.494660] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.496170] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.496231] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.496255] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.496309] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.496925] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.496974] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.497024] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.497608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.497672] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.497735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.498347] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.498427] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.498480] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.499074] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.499123] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.499176] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.499902] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.499960] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.500013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.500724] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.500782] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.500803] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.500816] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.500829] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.500842] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.500856] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.500869] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.500991] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.501035] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.501049] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.501063] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.501077] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.501133] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.542983] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.543805] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.544513] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.545148] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.545749] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.546331] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.546999] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.547504] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.548046] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.548744] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.549639] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.550266] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.550942] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.551667] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.552291] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.553021] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.553764] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.554377] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.555046] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.555719] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.556375] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.557040] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.557630] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.558154] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.558948] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.559675] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.560204] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.560849] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.561559] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.562221] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.562870] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.563577] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.564169] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.564838] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.565570] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.566258] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 23.579392] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 23.581732] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 23.583381] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 23.584652] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 23.602712] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 23.603121] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 26.533554] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 26.534816] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 26.625210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 26.627045] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 26.628377] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 26.629385] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 27.825717] systemd-udevd (303) used greatest stack depth: 11832 bytes left <6>[ 27.832669] systemd-udevd (298) used greatest stack depth: 11208 bytes left <7>[ 29.185359] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 29.187026] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 29.198713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 29.200107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 29.201387] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 34.706794] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=674 'systemd' <5>[ 35.165247] systemd-journald[215]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 35.239095] systemd-journald[215]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 36.058332] fuse: init (API version 7.38)