<5>[ 0.000000] Linux version 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ (kbuild2@gfx-ci) (gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT_DYNAMIC Sun Jul 16 22:35:08 UTC 2023 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006ca41fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006ca42000-0x000000006fdb9fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fdba000-0x000000006fee0fff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006fee1000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fe16000 SMBIOS=0x6cb19000 MEMATTR=0x67f8f018 ESRT=0x67b9f198 TPMEventLog=0x67ead018 <6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.6 present. <6>[ 0.000000] DMI: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3223.D80.2305311348 05/31/2023 <6>[ 0.000000] tsc: Detected 3400.000 MHz processor <6>[ 0.000000] tsc: Detected 3379.200 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000014] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000018] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 8 entries (3 fixed + 5 variable; max 23), built from 10 variable MTRRs <6>[ 0.000022] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <7>[ 0.000390] e820: update [mem 0x7c000000-0xffffffff] usable ==> reserved <7>[ 0.000392] e820: update [mem 0x87f800000-0x87fffffff] usable ==> reserved <6>[ 0.000395] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000396] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.000398] esrt: Reserving ESRT space from 0x0000000067b9f198 to 0x0000000067b9f310. <7>[ 0.000404] e820: update [mem 0x67b9f000-0x67b9ffff] usable ==> reserved <6>[ 0.000423] Using GB pages for direct mapping <6>[ 0.001168] printk: log_buf_len: 1048576 bytes <6>[ 0.001170] printk: early log buf free: 259064(98%) <6>[ 0.001171] Secure boot disabled <6>[ 0.001172] ACPI: Early table checksum verification disabled <6>[ 0.001175] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.001179] ACPI: XSDT 0x000000006FF19228 000174 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001184] ACPI: FACP 0x000000006FFDE000 000114 (v06 INTEL MTL 00000002 01000013) <6>[ 0.001188] ACPI: DSDT 0x000000006FF57000 083505 (v02 INTEL MTL 00000002 01000013) <6>[ 0.001190] ACPI: FACS 0x000000006FDFB000 000040 <6>[ 0.001192] ACPI: SSDT 0x000000006FFFC000 00038C (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.001195] ACPI: SSDT 0x000000006FFFB000 00070D (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.001197] ACPI: SSDT 0x000000006FFFA000 0005E4 (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.001199] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.001201] ACPI: SSDT 0x000000006FFF7000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.001204] ACPI: SSDT 0x000000006FFF5000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.001206] ACPI: SSDT 0x000000006FFF3000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.001208] ACPI: SSDT 0x000000006FFEF000 003BC8 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.001210] ACPI: DTPR 0x000000006FFEE000 000098 (v01 00000000 00000000) <6>[ 0.001213] ACPI: SSDT 0x000000006FFED000 000D03 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.001215] ACPI: SSDT 0x000000006FFEA000 002447 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.001217] ACPI: SSDT 0x000000006FFE0000 0096C5 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.001219] ACPI: SSDT 0x000000006FFDF000 0000F9 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.001222] ACPI: HPET 0x000000006FFDD000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001224] ACPI: APIC 0x000000006FFDC000 000358 (v05 INTEL MTL 00000002 01000013) <6>[ 0.001226] ACPI: MCFG 0x000000006FFDB000 00003C (v01 INTEL MTL 00000002 01000013) <6>[ 0.001228] ACPI: SSDT 0x000000006FF47000 00FD75 (v02 INTEL MtlP_Rvp 00001000 INTL 20210930) <6>[ 0.001230] ACPI: SSDT 0x000000006FF45000 00147F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.001232] ACPI: SSDT 0x000000006FF41000 00389C (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.001235] ACPI: SSDT 0x000000006FF3B000 005331 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.001237] ACPI: SSDT 0x000000006FFFD000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930) <6>[ 0.001239] ACPI: TPM2 0x000000006FF39000 00004C (v04 INTEL MTL 00000002 01000013) <6>[ 0.001241] ACPI: LPIT 0x000000006FF38000 0000CC (v01 INTEL MTL 00000002 01000013) <6>[ 0.001243] ACPI: WSMT 0x000000006FF37000 000028 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001246] ACPI: SSDT 0x000000006FF36000 000CA6 (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.001248] ACPI: SSDT 0x000000006FF35000 00012A (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.001250] ACPI: DBGP 0x000000006FF34000 000034 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001252] ACPI: DBG2 0x000000006FF33000 000054 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001254] ACPI: NHLT 0x000000006FF31000 001383 (v00 INTEL MTL 00000002 01000013) <6>[ 0.001256] ACPI: SSDT 0x000000006FF2F000 001171 (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.001259] ACPI: SSDT 0x000000006FF29000 005CA6 (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.001261] ACPI: ECDT 0x000000006FF28000 000069 (v01 MTL 00000002 01000013) <6>[ 0.001263] ACPI: DMAR 0x000000006FF27000 0000A8 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001265] ACPI: FPDT 0x000000006FF26000 000044 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001267] ACPI: SSDT 0x000000006FF24000 001001 (v02 INTEL xh_mtlp3 00000000 INTL 20210930) <6>[ 0.001270] ACPI: SSDT 0x000000006FF21000 002534 (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.001272] ACPI: SSDT 0x000000006FF1E000 0028D3 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.001274] ACPI: SSDT 0x000000006FF1C000 0011A0 (v02 INTEL St00Ssdt 00001000 INTL 20210930) <6>[ 0.001276] ACPI: ASF! 0x000000006FF1B000 000074 (v32 INTEL MTL 00000002 01000013) <6>[ 0.001278] ACPI: PHAT 0x000000006FF1A000 000850 (v01 INTEL MTL 00000005 MSFT 0100000D) <6>[ 0.001281] ACPI: BGRT 0x000000006FF3A000 000038 (v01 INTEL MTL 00000002 01000013) <6>[ 0.001282] ACPI: Reserving FACP table memory at [mem 0x6ffde000-0x6ffde113] <6>[ 0.001284] ACPI: Reserving DSDT table memory at [mem 0x6ff57000-0x6ffda504] <6>[ 0.001284] ACPI: Reserving FACS table memory at [mem 0x6fdfb000-0x6fdfb03f] <6>[ 0.001285] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc38b] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb70c] <6>[ 0.001286] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5e3] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.001287] ACPI: Reserving SSDT table memory at [mem 0x6fff7000-0x6fff8bae] <6>[ 0.001288] ACPI: Reserving SSDT table memory at [mem 0x6fff5000-0x6fff661f] <6>[ 0.001289] ACPI: Reserving SSDT table memory at [mem 0x6fff3000-0x6fff4348] <6>[ 0.001289] ACPI: Reserving SSDT table memory at [mem 0x6ffef000-0x6fff2bc7] <6>[ 0.001290] ACPI: Reserving DTPR table memory at [mem 0x6ffee000-0x6ffee097] <6>[ 0.001290] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6ffedd02] <6>[ 0.001291] ACPI: Reserving SSDT table memory at [mem 0x6ffea000-0x6ffec446] <6>[ 0.001292] ACPI: Reserving SSDT table memory at [mem 0x6ffe0000-0x6ffe96c4] <6>[ 0.001292] ACPI: Reserving SSDT table memory at [mem 0x6ffdf000-0x6ffdf0f8] <6>[ 0.001293] ACPI: Reserving HPET table memory at [mem 0x6ffdd000-0x6ffdd037] <6>[ 0.001294] ACPI: Reserving APIC table memory at [mem 0x6ffdc000-0x6ffdc357] <6>[ 0.001294] ACPI: Reserving MCFG table memory at [mem 0x6ffdb000-0x6ffdb03b] <6>[ 0.001295] ACPI: Reserving SSDT table memory at [mem 0x6ff47000-0x6ff56d74] <6>[ 0.001295] ACPI: Reserving SSDT table memory at [mem 0x6ff45000-0x6ff4647e] <6>[ 0.001296] ACPI: Reserving SSDT table memory at [mem 0x6ff41000-0x6ff4489b] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6ff3b000-0x6ff40330] <6>[ 0.001297] ACPI: Reserving SSDT table memory at [mem 0x6fffd000-0x6fffd60d] <6>[ 0.001298] ACPI: Reserving TPM2 table memory at [mem 0x6ff39000-0x6ff3904b] <6>[ 0.001299] ACPI: Reserving LPIT table memory at [mem 0x6ff38000-0x6ff380cb] <6>[ 0.001299] ACPI: Reserving WSMT table memory at [mem 0x6ff37000-0x6ff37027] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6ff36000-0x6ff36ca5] <6>[ 0.001300] ACPI: Reserving SSDT table memory at [mem 0x6ff35000-0x6ff35129] <6>[ 0.001301] ACPI: Reserving DBGP table memory at [mem 0x6ff34000-0x6ff34033] <6>[ 0.001302] ACPI: Reserving DBG2 table memory at [mem 0x6ff33000-0x6ff33053] <6>[ 0.001302] ACPI: Reserving NHLT table memory at [mem 0x6ff31000-0x6ff32382] <6>[ 0.001303] ACPI: Reserving SSDT table memory at [mem 0x6ff2f000-0x6ff30170] <6>[ 0.001304] ACPI: Reserving SSDT table memory at [mem 0x6ff29000-0x6ff2eca5] <6>[ 0.001304] ACPI: Reserving ECDT table memory at [mem 0x6ff28000-0x6ff28068] <6>[ 0.001305] ACPI: Reserving DMAR table memory at [mem 0x6ff27000-0x6ff270a7] <6>[ 0.001305] ACPI: Reserving FPDT table memory at [mem 0x6ff26000-0x6ff26043] <6>[ 0.001306] ACPI: Reserving SSDT table memory at [mem 0x6ff24000-0x6ff25000] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ff21000-0x6ff23533] <6>[ 0.001307] ACPI: Reserving SSDT table memory at [mem 0x6ff1e000-0x6ff208d2] <6>[ 0.001308] ACPI: Reserving SSDT table memory at [mem 0x6ff1c000-0x6ff1d19f] <6>[ 0.001309] ACPI: Reserving ASF! table memory at [mem 0x6ff1b000-0x6ff1b073] <6>[ 0.001309] ACPI: Reserving PHAT table memory at [mem 0x6ff1a000-0x6ff1a84f] <6>[ 0.001310] ACPI: Reserving BGRT table memory at [mem 0x6ff3a000-0x6ff3a037] <6>[ 0.001322] Setting APIC routing to cluster x2apic. <6>[ 0.045564] Zone ranges: <6>[ 0.045566] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.045568] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.045570] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045571] Movable zone start for each node <6>[ 0.045572] Early memory node ranges <6>[ 0.045572] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.045574] node 0: [mem 0x0000000000100000-0x000000006ca41fff] <6>[ 0.045575] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.045575] node 0: [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.045577] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.045580] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.045604] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.048022] On node 0, zone DMA32: 13757 pages in unavailable ranges <6>[ 0.090188] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.090583] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.090589] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.090634] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.090636] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.090638] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.090641] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.090642] ACPI: HPET id: 0x8086a201 base: 0xfed00000 <7>[ 0.090650] e820: update [mem 0x67fa8000-0x67fc2fff] usable ==> reserved <6>[ 0.090656] TSC deadline timer available <6>[ 0.090657] smpboot: Allowing 22 CPUs, 0 hotplug CPUs <6>[ 0.090667] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.090668] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.090669] PM: hibernation: Registered nosave memory: [mem 0x67b9f000-0x67b9ffff] <6>[ 0.090670] PM: hibernation: Registered nosave memory: [mem 0x67fa8000-0x67fc2fff] <6>[ 0.090671] PM: hibernation: Registered nosave memory: [mem 0x6ca42000-0x6fdb9fff] <6>[ 0.090672] PM: hibernation: Registered nosave memory: [mem 0x6fdba000-0x6fee0fff] <6>[ 0.090672] PM: hibernation: Registered nosave memory: [mem 0x6fee1000-0x6fffefff] <6>[ 0.090673] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff] <6>[ 0.090674] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff] <6>[ 0.090674] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff] <6>[ 0.090675] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff] <6>[ 0.090676] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.090681] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.093836] setup_percpu: NR_CPUS:64 nr_cpumask_bits:22 nr_cpu_ids:22 nr_node_ids:1 <6>[ 0.095319] percpu: Embedded 72 pages/cpu s254752 r8192 d31968 u524288 <7>[ 0.095323] pcpu-alloc: s254752 r8192 d31968 u524288 alloc=1*2097152 <7>[ 0.095325] pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 <7>[ 0.095330] pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 <7>[ 0.095335] pcpu-alloc: [0] 16 17 18 19 [0] 20 21 -- -- <5>[ 0.095348] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes console=tty1 console=ttyS0,115200 iommu=pt nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 drm.debug=0xe log_buf_len=1M trace_clock=global 3 ro <5>[ 0.095410] Unknown kernel command line parameters "3 BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.095440] random: crng init done <6>[ 0.098255] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.099647] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.099747] Built 1 zonelists, mobility grouping on. Total pages: 8177209 <6>[ 0.099750] mem auto-init: stack:off, heap alloc:off, heap free:off <6>[ 0.099752] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.100470] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear) <6>[ 0.100485] software IO TLB: area num 32. <6>[ 0.753982] Memory: 32435060K/33228676K available (16384K kernel code, 2617K rwdata, 5440K rodata, 2564K init, 21168K bss, 793360K reserved, 0K cma-reserved) <4>[ 0.753985] ********************************************************** <4>[ 0.753985] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.753986] ** ** <4>[ 0.753986] ** This system shows unhashed kernel memory addresses ** <4>[ 0.753987] ** via the console, logs, and other interfaces. This ** <4>[ 0.753988] ** might reduce the security of your system. ** <4>[ 0.753988] ** ** <4>[ 0.753988] ** If you see this message and you are not debugging ** <4>[ 0.753989] ** the kernel, report this immediately to your system ** <4>[ 0.753989] ** administrator! ** <4>[ 0.753990] ** ** <4>[ 0.753990] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.753991] ********************************************************** <6>[ 0.754161] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=22, Nodes=1 <6>[ 0.754626] Dynamic Preempt: full <6>[ 0.754851] Running RCU self tests <6>[ 0.754851] Running RCU synchronous self tests <6>[ 0.754893] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.754894] rcu: RCU lockdep checking is enabled. <6>[ 0.754894] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=22. <6>[ 0.754895] rcu: RCU callback double-/use-after-free debug is enabled. <6>[ 0.754896] Trampoline variant of Tasks RCU enabled. <6>[ 0.754897] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.754898] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=22 <6>[ 0.754963] Running RCU synchronous self tests <6>[ 0.758756] NR_IRQS: 4352, nr_irqs: 2232, preallocated irqs: 16 <6>[ 0.759117] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.759437] Console: colour dummy device 80x25 <6>[ 0.759450] printk: console [tty1] enabled <6>[ 0.761384] printk: console [ttyS0] enabled <4>[ 2.232036] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <4>[ 2.239705] ... MAX_LOCKDEP_SUBCLASSES: 8 <4>[ 2.243766] ... MAX_LOCK_DEPTH: 48 <4>[ 2.247913] ... MAX_LOCKDEP_KEYS: 8192 <4>[ 2.252235] ... CLASSHASH_SIZE: 4096 <4>[ 2.256558] ... MAX_LOCKDEP_ENTRIES: 32768 <4>[ 2.260965] ... MAX_LOCKDEP_CHAINS: 131072 <4>[ 2.265457] ... CHAINHASH_SIZE: 65536 <4>[ 2.269866] memory used by lock dependency info: 9461 kB <4>[ 2.275217] memory used for stack traces: 8320 kB <4>[ 2.279968] per task-struct memory footprint: 1920 bytes <6>[ 2.285329] ACPI: Core revision 20230331 <6>[ 2.290164] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns <6>[ 2.299283] APIC: Switch to symmetric I/O mode setup <6>[ 2.304261] DMAR: Host address width 42 <6>[ 2.308111] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 2.313446] DMAR: dmar0: reg_base_addr fc800000 ver 7:0 cap c9de008cee690462 ecap 12ca9a00f0ef5e <6>[ 2.322187] DMAR: DRHD base: 0x000000fc801000 flags: 0x1 <6>[ 2.327506] DMAR: dmar1: reg_base_addr fc801000 ver 7:0 cap c9de008cee690462 ecap 12ca9a04f0efde <6>[ 2.336248] DMAR: SATC flags: 0x1 <6>[ 2.339589] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc801000 IOMMU 1 <6>[ 2.345923] DMAR-IR: HPET id 0 under DRHD base 0xfc801000 <6>[ 2.351312] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 2.361653] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 2.371636] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 2.382192] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 2.392620] Calibrating delay loop (skipped), value calculated using timer frequency.. 6758.40 BogoMIPS (lpj=3379200) <6>[ 2.393678] CPU0: Thermal monitoring enabled (TM1) <6>[ 2.394618] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 2.395806] process: using mwait in idle threads <6>[ 2.396621] CET detected: Indirect Branch Tracking enabled <6>[ 2.397619] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 2.398617] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 2.399621] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 2.400622] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 2.401618] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch <6>[ 2.402622] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 2.403621] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 2.404632] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 2.405620] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 2.406619] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 2.407619] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 2.408621] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 2.409618] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 2.410618] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format. <6>[ 2.423378] Freeing SMP alternatives memory: 36K <6>[ 2.423620] pid_max: default: 32768 minimum: 301 <6>[ 2.433217] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.433674] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 2.435164] Running RCU synchronous self tests <6>[ 2.435619] Running RCU synchronous self tests <6>[ 2.436789] smpboot: CPU0: Intel(R) Core(TM) Ultra 7 1002H (family: 0x6, model: 0xaa, stepping: 0x4) <6>[ 2.438084] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1. <6>[ 2.438654] Running RCU-tasks wait API self tests <6>[ 2.548631] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Meteorlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 2.549741] core: cpu_core PMU driver: <6>[ 2.550618] ... version: 5 <6>[ 2.551618] ... bit width: 48 <6>[ 2.554615] ... generic registers: 8 <6>[ 2.555618] ... value mask: 0000ffffffffffff <6>[ 2.556633] ... max period: 00007fffffffffff <6>[ 2.557619] ... fixed-purpose events: 4 <6>[ 2.558618] ... event mask: 0000000f000000ff <6>[ 2.559677] signal: max sigframe size: 3632 <6>[ 2.560635] Estimated ratio of average max frequency by base frequency (times 1024): 1505 <6>[ 2.561694] rcu: Hierarchical SRCU implementation. <6>[ 2.562618] rcu: Max phase no-delay instances is 400. <6>[ 2.565723] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 2.567208] smp: Bringing up secondary CPUs ... <6>[ 2.567923] smpboot: x86: Booting SMP configuration: <6>[ 2.568628] .... node #0, CPUs: #2 #4 #6 #8 #10 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 <6>[ 1.614362] core: cpu_atom PMU driver: PEBS-via-PT <6>[ 1.614362] ... version: 5 <6>[ 1.614362] ... bit width: 48 <6>[ 1.614362] ... generic registers: 8 <6>[ 1.614362] ... value mask: 0000ffffffffffff <6>[ 1.614362] ... max period: 00007fffffffffff <6>[ 1.614362] ... fixed-purpose events: 3 <6>[ 1.614362] ... event mask: 00000007000000ff <4>[ 2.624908] #1 #3 #5 #7 #9 #11 <6>[ 2.630638] smp: Brought up 1 node, 22 CPUs <6>[ 2.632618] smpboot: Max logical packages: 1 <6>[ 2.633617] smpboot: Total of 22 processors activated (148684.80 BogoMIPS) <6>[ 2.639797] devtmpfs: initialized <6>[ 2.641645] ACPI: PM: Registering ACPI NVS region [mem 0x6fdba000-0x6fee0fff] (1208320 bytes) <6>[ 2.643107] Running RCU synchronous self tests <6>[ 2.643632] Running RCU synchronous self tests <6>[ 2.644687] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 2.645630] futex hash table entries: 8192 (order: 8, 1048576 bytes, linear) <6>[ 2.646899] pinctrl core: initialized pinctrl subsystem <6>[ 2.648075] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 2.649796] thermal_sys: Registered thermal governor 'fair_share' <6>[ 2.649797] thermal_sys: Registered thermal governor 'step_wise' <6>[ 2.650620] thermal_sys: Registered thermal governor 'user_space' <6>[ 2.651676] cpuidle: using governor menu <6>[ 2.653690] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 2.654872] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 2.655633] PCI: not using MMCONFIG <6>[ 2.656626] PCI: Using configuration type 1 for base access <4>[ 2.659002] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 2.660682] Callback from call_rcu_tasks() invoked. <6>[ 2.661672] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 2.670639] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 2.676630] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 2.683803] cryptd: max_cpu_qlen set to 1000 <6>[ 2.704652] raid6: avx2x4 gen() 56416 MB/s <6>[ 2.726436] raid6: avx2x2 gen() 56384 MB/s <6>[ 2.747428] raid6: avx2x1 gen() 55844 MB/s <6>[ 2.751618] raid6: using algorithm avx2x4 gen() 56416 MB/s <6>[ 2.773016] raid6: .... xor() 9387 MB/s, rmw enabled <6>[ 2.777619] raid6: using avx2x2 recovery algorithm <6>[ 2.782908] ACPI: Added _OSI(Module Device) <6>[ 2.787620] ACPI: Added _OSI(Processor Device) <6>[ 2.791618] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 2.796625] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 3.188315] ACPI: 26 ACPI AML tables successfully acquired and loaded <6>[ 3.206213] ACPI: EC: EC started <6>[ 3.209612] ACPI: EC: interrupt blocked <6>[ 3.217830] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 3.222619] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 3.491289] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked <6>[ 5.152884] ACPI: Interpreter enabled <6>[ 5.156735] ACPI: PM: (supports S0 S4 S5) <6>[ 5.160621] ACPI: Using IOAPIC for interrupt routing <6>[ 5.165770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000) <6>[ 5.204478] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved as ACPI motherboard resource <6>[ 5.212637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 5.221624] PCI: Ignoring E820 reservations for host bridge windows <6>[ 5.252702] ACPI: Enabled 9 GPEs in block 00 to 7F <6>[ 5.253610] ACPI: Enabled 8 GPEs in block 80 to DF <6>[ 5.306878] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 5.431657] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 5.442765] ACPI: \_SB_.PC00.RP01.PXP_: New power resource <6>[ 5.464796] ACPI: \_SB_.PC00.RP06.PXP_: New power resource <6>[ 5.476314] ACPI: \_SB_.PC00.RP07.PXP_: New power resource <6>[ 5.494099] ACPI: \_SB_.PC00.RP09.PXP_: New power resource <6>[ 5.504986] ACPI: \_SB_.PC00.RP10.PXP_: New power resource <6>[ 5.516552] ACPI: \_SB_.PC00.RP11.PXP_: New power resource <6>[ 5.527223] ACPI: \_SB_.PC00.RP12.PXP_: New power resource <6>[ 5.593191] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 5.598896] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 5.603890] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 5.897808] ACPI: \_TZ_.FN00: New power resource <6>[ 5.903144] ACPI: \_TZ_.FN01: New power resource <6>[ 5.908132] ACPI: \_TZ_.FN02: New power resource <6>[ 5.913129] ACPI: \_TZ_.FN03: New power resource <6>[ 5.918136] ACPI: \_TZ_.FN04: New power resource <6>[ 5.926231] ACPI: \PIN_: New power resource <6>[ 5.932965] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 5.938631] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] <6>[ 5.950798] acpi PNP0A08:00: _OSC: platform does not support [AER] <6>[ 5.962723] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability LTR] <6>[ 5.978635] PCI host bridge to bus 0000:00 <6>[ 5.982622] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 5.989626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 5.996623] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 6.003624] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 6.010624] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x3ffbfffffff window] <6>[ 6.018625] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 6.033060] pci 0000:00:00.0: [8086:7d01] type 00 class 0x060000 <6>[ 6.039130] pci 0000:00:02.0: [8086:7d55] type 00 class 0x030000 <6>[ 6.044634] pci 0000:00:02.0: reg 0x10: [mem 0x5018000000-0x5018ffffff 64bit pref] <6>[ 6.052634] pci 0000:00:02.0: reg 0x18: [mem 0x4000000000-0x400fffffff 64bit pref] <6>[ 6.059664] pci 0000:00:02.0: BAR 2: assigned to efifb <6>[ 6.064623] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 6.073668] pci 0000:00:02.0: PME# supported from D0 D3hot <6>[ 6.079676] pci 0000:00:04.0: [8086:7d03] type 00 class 0x118000 <6>[ 6.085636] pci 0000:00:04.0: reg 0x10: [mem 0x501a280000-0x501a29ffff 64bit] <6>[ 6.093719] pci 0000:00:05.0: [8086:7d19] type 00 class 0x048000 <6>[ 6.099631] pci 0000:00:05.0: reg 0x10: [mem 0x5019000000-0x5019ffffff 64bit] <6>[ 6.106640] pci 0000:00:05.0: enabling Extended Tags <6>[ 6.112376] pci 0000:00:06.0: [8086:7ecb] type 01 class 0x060400 <6>[ 6.118761] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold <6>[ 6.128598] pci 0000:00:07.0: [8086:7ec6] type 01 class 0x060400 <6>[ 6.134853] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 6.144160] pci 0000:00:07.3: [8086:7ec7] type 01 class 0x060400 <6>[ 6.150851] pci 0000:00:07.3: PME# supported from D0 D3hot D3cold <6>[ 6.160163] pci 0000:00:08.0: [8086:7e4c] type 00 class 0x088000 <6>[ 6.165637] pci 0000:00:08.0: reg 0x10: [mem 0x501a2e3000-0x501a2e3fff 64bit] <6>[ 6.173000] pci 0000:00:0a.0: [8086:7d0d] type 00 class 0x118000 <6>[ 6.179629] pci 0000:00:0a.0: reg 0x10: [mem 0x501a240000-0x501a27ffff 64bit] <6>[ 6.186643] pci 0000:00:0a.0: enabling Extended Tags <6>[ 6.190814] pci 0000:00:0b.0: [8086:7d1d] type 00 class 0x120000 <6>[ 6.197631] pci 0000:00:0b.0: reg 0x10: [mem 0x5010000000-0x5017ffffff 64bit] <6>[ 6.204636] pci 0000:00:0b.0: reg 0x20: [mem 0x501a2e2000-0x501a2e2fff 64bit] <6>[ 6.211997] pci 0000:00:0d.0: [8086:7ec0] type 00 class 0x0c0330 <6>[ 6.217639] pci 0000:00:0d.0: reg 0x10: [mem 0x501a2c0000-0x501a2cffff 64bit] <6>[ 6.224698] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 6.232043] pci 0000:00:0d.3: [8086:7ec3] type 00 class 0x0c0340 <6>[ 6.237638] pci 0000:00:0d.3: reg 0x10: [mem 0x501a200000-0x501a23ffff 64bit] <6>[ 6.244634] pci 0000:00:0d.3: reg 0x18: [mem 0x501a2e1000-0x501a2e1fff 64bit] <6>[ 6.251683] pci 0000:00:0d.3: supports D1 D2 <6>[ 6.256619] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 6.263731] pci 0000:00:12.0: [8086:7e45] type 00 class 0x070000 <6>[ 6.269634] pci 0000:00:12.0: reg 0x10: [mem 0x501a2b0000-0x501a2bffff 64bit] <6>[ 6.276684] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 6.284802] pci 0000:00:14.0: [8086:7e7d] type 00 class 0x0c0330 <6>[ 6.290637] pci 0000:00:14.0: reg 0x10: [mem 0x501a2a0000-0x501a2affff 64bit] <6>[ 6.297695] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 6.305293] pci 0000:00:14.2: [8086:7e7f] type 00 class 0x050000 <6>[ 6.310638] pci 0000:00:14.2: reg 0x10: [mem 0x501a2d4000-0x501a2d7fff 64bit] <6>[ 6.317634] pci 0000:00:14.2: reg 0x18: [mem 0x501a2e0000-0x501a2e0fff 64bit] <6>[ 6.324925] pci 0000:00:15.0: [8086:7e78] type 00 class 0x0c8000 <6>[ 6.331668] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.338887] pci 0000:00:15.1: [8086:7e79] type 00 class 0x0c8000 <6>[ 6.344673] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.352888] pci 0000:00:15.2: [8086:7e7a] type 00 class 0x0c8000 <6>[ 6.358674] pci 0000:00:15.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.366902] pci 0000:00:15.3: [8086:7e7b] type 00 class 0x0c8000 <6>[ 6.372674] pci 0000:00:15.3: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.380873] pci 0000:00:16.0: [8086:7e70] type 00 class 0x078000 <6>[ 6.386643] pci 0000:00:16.0: reg 0x10: [mem 0x501a2db000-0x501a2dbfff 64bit] <6>[ 6.393713] pci 0000:00:16.0: PME# supported from D3hot <6>[ 6.401715] pci 0000:00:16.3: [8086:7e73] type 00 class 0x070002 <6>[ 6.407632] pci 0000:00:16.3: reg 0x10: [io 0x3020-0x3027] <6>[ 6.412625] pci 0000:00:16.3: reg 0x14: [mem 0x8e121000-0x8e121fff] <6>[ 6.418939] pci 0000:00:19.0: [8086:7e50] type 00 class 0x0c8000 <6>[ 6.424668] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.432219] pci 0000:00:19.1: [8086:7e51] type 00 class 0x0c8000 <6>[ 6.438668] pci 0000:00:19.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit] <6>[ 6.445859] pci 0000:00:1f.0: [8086:7e02] type 00 class 0x060100 <6>[ 6.453857] pci 0000:00:1f.3: [8086:7e28] type 00 class 0x040100 <6>[ 6.459664] pci 0000:00:1f.3: reg 0x10: [mem 0x501a2d0000-0x501a2d3fff 64bit] <6>[ 6.466679] pci 0000:00:1f.3: reg 0x20: [mem 0x501a000000-0x501a1fffff 64bit] <6>[ 6.473744] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 6.479973] pci 0000:00:1f.4: [8086:7e22] type 00 class 0x0c0500 <6>[ 6.485643] pci 0000:00:1f.4: reg 0x10: [mem 0x501a2d8000-0x501a2d80ff 64bit] <6>[ 6.492648] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf] <6>[ 6.499642] pci 0000:00:1f.5: [8086:7e23] type 00 class 0x0c8000 <6>[ 6.505655] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff] <6>[ 6.511914] pci 0000:00:1f.6: [8086:550a] type 00 class 0x020000 <6>[ 6.517647] pci 0000:00:1f.6: reg 0x10: [mem 0x8e100000-0x8e11ffff] <6>[ 6.523771] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 6.530800] pci 0000:01:00.0: [15b7:501e] type 00 class 0x010802 <6>[ 6.537681] pci 0000:01:00.0: reg 0x10: [mem 0x8e000000-0x8e003fff 64bit] <6>[ 6.544506] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 6.549625] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 6.556759] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 6.561643] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 6.568646] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 6.576756] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 6.581643] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 6.588645] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <7>[ 6.596659] pci_bus 0000:00: on NUMA node 0 <6>[ 9.446674] Low-power S0 idle used by default for system suspend <6>[ 9.828848] ACPI: EC: interrupt unblocked <6>[ 9.832612] ACPI: EC: event unblocked <6>[ 9.835612] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 9.840744] ACPI: EC: GPE=0x6e <6>[ 9.844842] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 9.851631] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 9.859651] iommu: Default domain type: Passthrough (set via kernel command line) <5>[ 9.867109] SCSI subsystem initialized <7>[ 9.870661] libata version 3.00 loaded. <6>[ 9.870752] ACPI: bus type USB registered <6>[ 9.874676] usbcore: registered new interface driver usbfs <6>[ 9.880650] usbcore: registered new interface driver hub <6>[ 9.885666] usbcore: registered new device driver usb <6>[ 9.891813] efivars: Registered efivars operations <6>[ 9.896735] Advanced Linux Sound Architecture Driver Initialized. <6>[ 9.903147] PCI: Using ACPI for IRQ routing <7>[ 9.924295] PCI: pci_cache_line_size set to 64 bytes <6>[ 9.924445] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window <7>[ 9.934778] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 9.934787] e820: reserve RAM buffer [mem 0x67b9f000-0x67ffffff] <7>[ 9.934791] e820: reserve RAM buffer [mem 0x67fa8000-0x67ffffff] <7>[ 9.934794] e820: reserve RAM buffer [mem 0x6ca42000-0x6fffffff] <7>[ 9.934797] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 9.934903] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 9.935610] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 9.935610] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 9.954624] vgaarb: loaded <6>[ 9.957786] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 <6>[ 9.963622] hpet0: 8 comparators, 64-bit 19.200000 MHz counter <6>[ 9.971740] clocksource: Switched to clocksource tsc-early <6>[ 9.977803] pnp: PnP ACPI init <6>[ 9.981688] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 9.987562] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 9.993934] system 00:01: [io 0x1854-0x1857] has been reserved <6>[ 10.001060] system 00:03: [io 0x06a4] has been reserved <6>[ 10.006332] system 00:03: [io 0x06a0] has been reserved <6>[ 10.030606] system 00:04: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 10.037169] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.044072] system 00:04: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 10.050975] system 00:04: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 10.057535] system 00:04: [mem 0xfed20000-0xfed7ffff] could not be reserved <6>[ 10.064438] system 00:04: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 10.071343] system 00:04: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 10.078238] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 10.089428] system 00:05: [io 0x2000-0x20fe] has been reserved <6>[ 10.096425] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 10.106599] pnp: PnP ACPI: found 8 devices <6>[ 10.120885] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 10.129895] NET: Registered PF_INET protocol family <6>[ 10.135002] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.144662] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 10.153596] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 10.161276] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 10.169507] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 10.179612] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 10.186475] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.193989] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear) <6>[ 10.201933] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 10.207575] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 02-2b] add_size 1000 <6>[ 10.215934] pci 0000:00:07.3: bridge window [io 0x1000-0x0fff] to [bus 2c-55] add_size 1000 <6>[ 10.224314] pci 0000:00:07.0: BAR 7: assigned [io 0x4000-0x4fff] <6>[ 10.230355] pci 0000:00:07.3: BAR 7: assigned [io 0x5000-0x5fff] <6>[ 10.236397] pci 0000:00:15.0: BAR 0: assigned [mem 0x501a2d9000-0x501a2d9fff 64bit] <6>[ 10.244020] pci 0000:00:15.1: BAR 0: assigned [mem 0x501a2da000-0x501a2dafff 64bit] <6>[ 10.251639] pci 0000:00:15.2: BAR 0: assigned [mem 0x501a2dc000-0x501a2dcfff 64bit] <6>[ 10.259279] pci 0000:00:15.3: BAR 0: assigned [mem 0x501a2dd000-0x501a2ddfff 64bit] <6>[ 10.266902] pci 0000:00:19.0: BAR 0: assigned [mem 0x501a2de000-0x501a2defff 64bit] <6>[ 10.274521] pci 0000:00:19.1: BAR 0: assigned [mem 0x501a2df000-0x501a2dffff 64bit] <6>[ 10.282137] pci 0000:00:1f.5: BAR 0: assigned [mem 0x80800000-0x80800fff] <6>[ 10.288894] pci 0000:00:06.0: PCI bridge to [bus 01] <6>[ 10.293822] pci 0000:00:06.0: bridge window [mem 0x8e000000-0x8e0fffff] <6>[ 10.300552] pci 0000:00:07.0: PCI bridge to [bus 02-2b] <6>[ 10.305755] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 10.311816] pci 0000:00:07.0: bridge window [mem 0x88000000-0x8dffffff] <6>[ 10.318558] pci 0000:00:07.0: bridge window [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.326594] pci 0000:00:07.3: PCI bridge to [bus 2c-55] <6>[ 10.331795] pci 0000:00:07.3: bridge window [io 0x5000-0x5fff] <6>[ 10.337857] pci 0000:00:07.3: bridge window [mem 0x82000000-0x87ffffff] <6>[ 10.344590] pci 0000:00:07.3: bridge window [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.352625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 10.358750] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 10.364873] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 10.371686] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 10.378500] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x3ffbfffffff window] <6>[ 10.385742] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x8e0fffff] <6>[ 10.391953] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] <6>[ 10.397474] pci_bus 0000:02: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 10.403682] pci_bus 0000:02: resource 2 [mem 0x4010000000-0x480fffffff 64bit pref] <6>[ 10.411179] pci_bus 0000:2c: resource 0 [io 0x5000-0x5fff] <6>[ 10.416699] pci_bus 0000:2c: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 10.422907] pci_bus 0000:2c: resource 2 [mem 0x4810000000-0x500fffffff 64bit pref] <6>[ 10.431518] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 10.438791] PCI: CLS 0 bytes, default 64 <6>[ 10.442757] DMAR: No RMRR found <6>[ 10.445896] DMAR: No ATSR found <6>[ 10.449018] DMAR: IOMMU feature nest inconsistent <6>[ 10.449020] DMAR: IOMMU feature sc_support inconsistent <6>[ 10.453692] DMAR: dmar0: Using Queued invalidation <6>[ 10.463642] DMAR: dmar1: Using Queued invalidation <6>[ 10.469371] pci 0000:00:02.0: Adding to iommu group 0 <6>[ 10.474747] pci 0000:00:00.0: Adding to iommu group 1 <6>[ 10.479804] pci 0000:00:04.0: Adding to iommu group 2 <6>[ 10.484853] pci 0000:00:05.0: Adding to iommu group 3 <6>[ 10.489912] pci 0000:00:06.0: Adding to iommu group 4 <6>[ 10.494986] pci 0000:00:07.0: Adding to iommu group 5 <6>[ 10.500060] pci 0000:00:07.3: Adding to iommu group 6 <6>[ 10.505108] pci 0000:00:08.0: Adding to iommu group 7 <6>[ 10.510159] pci 0000:00:0a.0: Adding to iommu group 8 <6>[ 10.515213] pci 0000:00:0b.0: Adding to iommu group 9 <6>[ 10.520289] pci 0000:00:0d.0: Adding to iommu group 10 <6>[ 10.525422] pci 0000:00:0d.3: Adding to iommu group 10 <6>[ 10.530572] pci 0000:00:12.0: Adding to iommu group 11 <6>[ 10.535728] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 10.540856] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 10.546042] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 10.551179] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 10.556319] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 10.561453] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 10.566614] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 10.571749] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 10.576919] pci 0000:00:19.0: Adding to iommu group 15 <6>[ 10.582054] pci 0000:00:19.1: Adding to iommu group 15 <6>[ 10.587259] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 10.592400] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 10.597538] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 10.602677] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 10.607808] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 10.612949] pci 0000:01:00.0: Adding to iommu group 17 <6>[ 10.618779] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 10.625162] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 10.631541] software IO TLB: mapped [mem 0x00000000635c2000-0x00000000675c2000] (64MB) <6>[ 10.639703] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 10.647546] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 10.653242] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 10.658852] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 10.664462] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 10.671725] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30b58de5898, max_idle_ns: 440795252453 ns <6>[ 10.681673] clocksource: Switched to clocksource tsc <6>[ 10.686683] platform rtc_cmos: registered platform RTC device (no PNP device found) <6>[ 10.705214] workingset: timestamp_bits=62 max_order=23 bucket_order=0 <6>[ 10.713968] ntfs: driver 2.1.32 [Flags: R/O]. <6>[ 10.721713] NET: Registered PF_ALG protocol family <6>[ 10.726481] xor: measuring software checksum speed <6>[ 10.731462] prefetch64-sse : 44037 MB/sec <6>[ 10.736021] generic_sse : 42190 MB/sec <6>[ 10.740344] xor: using function: prefetch64-sse (44037 MB/sec) <6>[ 10.746171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) <6>[ 10.753498] io scheduler mq-deadline registered <6>[ 10.757992] io scheduler kyber registered <6>[ 10.763417] pcieport 0000:00:06.0: PME: Signaling with IRQ 122 <6>[ 10.770233] pcieport 0000:00:07.0: PME: Signaling with IRQ 123 <6>[ 10.776139] pcieport 0000:00:07.0: pciehp: Slot #14 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.790944] pcieport 0000:00:07.3: PME: Signaling with IRQ 124 <6>[ 10.796840] pcieport 0000:00:07.3: pciehp: Slot #15 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ <6>[ 10.810800] efifb: probing for efifb <6>[ 10.814379] efifb: framebuffer at 0x4000800000, using 20252k, total 20250k <6>[ 10.821191] efifb: mode is 2880x1800x32, linelength=11520, pages=1 <6>[ 10.827317] efifb: scrolling: redraw <6>[ 10.830868] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 <6>[ 10.840429] Console: switching to colour frame buffer device 360x112 <6>[ 10.850763] fb0: EFI VGA frame buffer device <6>[ 10.855705] ACPI: AC: AC Adapter [ADP1] (on-line) <6>[ 10.860567] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:17/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 10.872471] ACPI: button: Lid Switch [LID0] <6>[ 10.876797] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 10.885176] ACPI: button: Sleep Button [SLPB] <6>[ 10.889626] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 10.898099] ACPI: button: Power Button [PWRB] <6>[ 10.968161] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 10.973790] ACPI: thermal: Thermal Zone [TZ00] (34 C) <6>[ 10.979347] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>[ 10.980290] ACPI: battery: Slot [BAT0] (battery present) <6>[ 10.990975] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 10.991249] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 10.999778] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 11.011131] serial 0000:00:16.3: enabling device (0000 -> 0003) <6>[ 11.018183] 0000:00:16.3: ttyS1 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <6>[ 11.027073] Non-volatile memory driver v1.3 <6>[ 11.031360] Linux agpgart interface v0.103 <6>[ 11.071309] ACPI: bus type drm_connector registered <6>[ 11.086805] loop: module loaded <6>[ 11.090565] nvme 0000:01:00.0: platform quirk: setting simple suspend <6>[ 11.091157] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.097181] nvme nvme0: pci function 0000:01:00.0 <6>[ 11.102194] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 11.115353] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.125072] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 11.130279] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 11.136683] nvme nvme0: allocated 64 MiB host memory buffer. <6>[ 11.137608] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.150453] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.158668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.165836] usb usb1: Product: xHCI Host Controller <6>[ 11.170685] usb usb1: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.178884] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 11.184024] hub 1-0:1.0: USB hub found <6>[ 11.187804] hub 1-0:1.0: 1 port detected <6>[ 11.188741] nvme nvme0: 16/0/0 default/read/poll queues <6>[ 11.194006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.202706] nvme0n1: p1 p2 <6>[ 11.205053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.205055] usb usb2: Product: xHCI Host Controller <6>[ 11.205057] usb usb2: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.228324] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 11.233301] hub 2-0:1.0: USB hub found <6>[ 11.237180] hub 2-0:1.0: 4 ports detected <6>[ 11.258390] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.263604] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 11.272137] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 11.281816] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 11.287017] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 11.294384] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 11.301571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05 <6>[ 11.309838] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.317064] usb usb3: Product: xHCI Host Controller <6>[ 11.321915] usb usb3: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.330169] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 11.335156] hub 3-0:1.0: USB hub found <6>[ 11.338978] hub 3-0:1.0: 12 ports detected <6>[ 11.364123] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05 <6>[ 11.372374] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 11.379620] usb usb4: Product: xHCI Host Controller <6>[ 11.384475] usb usb4: Manufacturer: Linux 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ xhci-hcd <6>[ 11.392738] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 11.397678] hub 4-0:1.0: USB hub found <6>[ 11.401673] hub 4-0:1.0: 2 ports detected <6>[ 11.408807] usbcore: registered new interface driver usb-storage <6>[ 11.414969] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 11.421769] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 12.133210] i8042: Can't read CTR while initializing i8042 <4>[ 12.139009] i8042: probe of i8042 failed with error -5 <6>[ 12.144418] mousedev: PS/2 mouse device common for all mice <6>[ 12.150385] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 12.156807] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 12.161644] rtc_cmos rtc_cmos: setting system clock to 1998-01-15T21:36:38 UTC (884900198) <6>[ 12.169936] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 12.176918] IR JVC protocol handler initialized <6>[ 12.181426] IR MCE Keyboard/mouse protocol handler initialized <6>[ 12.187214] IR NEC protocol handler initialized <6>[ 12.191716] IR RC5(x/sz) protocol handler initialized <6>[ 12.196731] IR RC6 protocol handler initialized <6>[ 12.201234] IR SANYO protocol handler initialized <6>[ 12.206805] IR Sharp protocol handler initialized <6>[ 12.212343] IR Sony protocol handler initialized <6>[ 12.217812] IR XMP protocol handler initialized <6>[ 12.224453] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 12.233713] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 12.241955] device-mapper: uevent: version 1.0.3 <6>[ 12.247586] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com <6>[ 12.256770] intel_pstate: Intel P-state driver initializing <6>[ 12.266939] intel_pstate: HWP enabled <6>[ 12.273176] sdhci: Secure Digital Host Controller Interface driver <6>[ 12.281722] sdhci: Copyright(c) Pierre Ossman <6>[ 12.296704] pstore: Registered efi_pstore as persistent store backend <6>[ 12.305448] hid: raw HID events driver (C) Jiri Kosina <6>[ 12.314494] usbcore: registered new interface driver usbhid <6>[ 12.322819] usbhid: USB HID core driver <6>[ 12.329158] pci 0000:00:08.0: Setting to D3hot <6>[ 12.347606] pci 0000:00:05.0: Setting to D3hot <6>[ 12.350905] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd <6>[ 12.364199] pci 0000:00:0b.0: Setting to D3hot <6>[ 12.379821] usb 4-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 <6>[ 12.384527] pci 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 12.388045] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <4>[ 12.394119] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 12.400828] usb 4-1: Product: USB 10/100/1000 LAN <6>[ 12.409615] intel_pmc_core INT33A1:00: initialized <6>[ 12.413790] usb 4-1: Manufacturer: Realtek <6>[ 12.419795] intel_rapl_msr: PL4 support detected. <6>[ 12.422818] usb 4-1: SerialNumber: 000001 <6>[ 12.428248] intel_rapl_common: Found RAPL domain package <6>[ 12.476958] intel_rapl_common: Found RAPL domain core <6>[ 12.486645] intel_rapl_common: Found RAPL domain uncore <6>[ 12.495955] intel_rapl_common: Found RAPL domain psys <6>[ 12.511171] Initializing XFRM netlink socket <6>[ 12.519665] NET: Registered PF_INET6 protocol family <6>[ 12.536758] Segment Routing with IPv6 <6>[ 12.545243] In-situ OAM (IOAM) with IPv6 <6>[ 12.554251] mip6: Mobile IPv6 <6>[ 12.562041] NET: Registered PF_PACKET protocol family <6>[ 12.571913] NET: Registered PF_KEY protocol family <6>[ 12.632041] IPI shorthand broadcast: enabled <6>[ 12.641167] AVX2 version of gcm_enc/dec engaged. <6>[ 12.650866] AES CTR mode by8 optimization enabled <6>[ 12.749192] sched_clock: Marking stable (11135016379, 1613362842)->(13127598271, -379219050) <6>[ 12.764445] registered taskstats version 1 <6>[ 12.887224] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers <6>[ 12.921293] Btrfs loaded, zoned=no, fsverity=no <6>[ 12.930941] pstore: Using crash dump compression: deflate <6>[ 12.960237] clk: Disabling unused clocks <6>[ 12.969161] ALSA device list: <6>[ 12.977036] No soundcards found. <6>[ 12.987646] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) <6>[ 13.768337] EXT4-fs (nvme0n1p2): mounted filesystem fec10944-567b-487d-898f-2dff9231051e ro with ordered data mode. Quota mode: disabled. <6>[ 13.786040] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 13.801103] devtmpfs: mounted <6>[ 13.812451] Freeing unused kernel image (initmem) memory: 2564K <6>[ 13.823244] Write protecting the kernel read-only data: 22528k <6>[ 13.835659] Freeing unused kernel image (rodata/data gap) memory: 704K <6>[ 13.847063] Run /sbin/init as init process <7>[ 13.855961] with arguments: <7>[ 13.855973] /sbin/init <7>[ 13.855984] 3 <7>[ 13.855993] with environment: <7>[ 13.856002] HOME=/ <7>[ 13.856011] TERM=linux <7>[ 13.856020] BOOT_IMAGE=/boot/drm_intel <7>[ 14.141225] systemd[1]: System time before build time, advancing clock. <7>[ 14.486213] systemd[1]: systemd 245.4-4ubuntu3.22 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) <7>[ 14.518351] systemd[1]: Detected architecture x86-64. <7>[ 14.564728] systemd[1]: Set hostname to . <6>[ 14.789180] cat (189) used greatest stack depth: 12960 bytes left <6>[ 14.806162] mkdir (192) used greatest stack depth: 12568 bytes left <6>[ 14.865037] systemd-bless-b (190) used greatest stack depth: 12536 bytes left <7>[ 15.763113] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. <7>[ 15.780944] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) <7>[ 15.805283] systemd[1]: Created slice system-modprobe.slice. <7>[ 15.829489] systemd[1]: Created slice system-serial\x2dgetty.slice. <7>[ 15.853663] systemd[1]: Created slice system-systemd\x2dfsck.slice. <7>[ 15.877306] systemd[1]: Created slice User and Session Slice. <7>[ 15.898103] systemd[1]: Started Forward Password Requests to Wall Directory Watch. <7>[ 15.921016] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. <7>[ 15.937910] systemd[1]: Reached target Remote File Systems. <7>[ 15.957765] systemd[1]: Reached target Slices. <7>[ 15.976336] systemd[1]: Listening on Device-mapper event daemon FIFOs. <7>[ 16.001079] systemd[1]: Listening on Syslog Socket. <7>[ 16.020330] systemd[1]: Listening on fsck to fsckd communication Socket. <7>[ 16.043681] systemd[1]: Listening on initctl Compatibility Named Pipe. <7>[ 16.104519] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. <7>[ 16.119299] systemd[1]: Listening on Journal Socket (/dev/log). <7>[ 16.141819] systemd[1]: Listening on Journal Socket. <7>[ 16.161678] systemd[1]: Listening on udev Control Socket. <7>[ 16.181916] systemd[1]: Listening on udev Kernel Socket. <7>[ 16.230849] systemd[1]: Mounting Huge Pages File System... <7>[ 16.288803] systemd[1]: Mounting POSIX Message Queue File System... <7>[ 16.345210] systemd[1]: Mounting Kernel Debug File System... <7>[ 16.400570] systemd[1]: Mounting Kernel Trace File System... <7>[ 16.455050] systemd[1]: Starting Journal Service... <7>[ 16.500154] systemd[1]: Starting Set the console keyboard layout... <7>[ 16.566579] systemd[1]: Starting Create list of static device nodes for the current kernel... <7>[ 16.594435] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. <7>[ 16.612832] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. <7>[ 16.656588] systemd[1]: Starting File System Check on Root Device... <7>[ 16.715494] systemd[1]: Starting Load Kernel Modules... <7>[ 16.771874] systemd[1]: Starting udev Coldplug all Devices... <7>[ 16.796067] systemd[1]: Starting Uncomplicated firewall... <7>[ 16.817506] systemd[1]: Started Journal Service. <6>[ 17.693275] EXT4-fs (nvme0n1p2): re-mounted fec10944-567b-487d-898f-2dff9231051e r/w. Quota mode: disabled. <6>[ 17.828621] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SS <7>[ 17.921640] systemd-journald[214]: Received client request to flush runtime journal. <5>[ 17.935819] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/system.journal corrupted or uncleanly shut down, renaming and replacing. <6>[ 19.421981] pps_core: LinuxPPS API ver. 1 registered <6>[ 19.421993] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 19.430416] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 19.449338] PTP clock support registered <6>[ 19.491961] i801_smbus 0000:00:1f.4: SPD Write Disable is set <6>[ 19.492224] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt <6>[ 19.497121] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 19.497133] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 19.503545] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 19.710510] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 19.783078] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88 <6>[ 19.783116] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection <6>[ 19.783271] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 19.920586] i2c i2c-0: 8/8 memory slots populated (from DMI) <4>[ 19.920621] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD <6>[ 19.936640] usbcore: registered new device driver r8152-cfgselector <6>[ 19.968763] e1000e 0000:00:1f.6 eno0: renamed from eth0 <6>[ 20.003255] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040100 <6>[ 20.003605] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 20.060431] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 20.106683] r8152-cfgselector 4-1: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 20.174976] r8152 4-1:1.0: load rtl8153a-4 v2 02/07/20 successfully <6>[ 20.207759] r8152 4-1:1.0 eth0: v1.12.13 <6>[ 20.208032] usbcore: registered new interface driver r8152 <6>[ 20.219844] usbcore: registered new interface driver cdc_ether <6>[ 20.226825] usbcore: registered new interface driver r8153_ecm <6>[ 20.468502] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 20.471293] r8152 4-1:1.0 enxe2015072f33f: renamed from eth0 <4>[ 20.742663] ********************************************************** <4>[ 20.742667] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.742670] ** ** <4>[ 20.742672] ** trace_printk() being used. Allocating extra memory. ** <4>[ 20.742675] ** ** <4>[ 20.742678] ** This means that this is a DEBUG kernel and it is ** <4>[ 20.742682] ** unsafe for production use. ** <4>[ 20.742685] ** ** <4>[ 20.742687] ** If you see this message and you are not debugging ** <4>[ 20.742690] ** the kernel, report this immediately to your vendor! ** <4>[ 20.742693] ** ** <4>[ 20.742696] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 20.742699] ********************************************************** <6>[ 20.906896] 0000usepeerdns (396) used greatest stack depth: 12360 bytes left <6>[ 20.946536] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <6>[ 20.977673] i915 0000:00:02.0: Force probing unsupported Device ID 7d55, tainting kernel <7>[ 20.981333] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.981939] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:yes huc:no slpc:yes) <6>[ 20.982513] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - HuC is not supported! <7>[ 20.982554] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found Meteor Lake PCH <7>[ 20.983055] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7>[ 20.983702] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT1: Setting up Standalone Media GT <7>[ 20.984287] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 2048K <7>[ 20.984904] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT1: enable_guc=3 (guc:yes submission:yes huc:yes slpc:yes) <7>[ 20.985632] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7>[ 20.986134] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 38400 kHz <7>[ 20.987489] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0000, instances: 0000 <7>[ 20.988010] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0000, instances: 0000 <7>[ 20.989654] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vdbox enable: 0005, instances: 0005 <7>[ 20.990044] i915 0000:00:02.0: [drm:intel_engines_init_mmio [i915]] vebox enable: 0001, instances: 0001 <5>[ 20.990429] i915 0000:00:02.0: [drm] No GSC FW selected, disabling GSC CS and media C6 <7>[ 20.991800] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7>[ 20.992324] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 0M <7>[ 20.992784] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 0M <6>[ 20.993089] i915 0000:00:02.0: [drm] VT-d active for gfx access <6>[ 20.995790] Console: switching to colour dummy device 80x25 <6>[ 21.003389] i915 0000:00:02.0: vgaarb: deactivate vga console <6>[ 21.004047] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7>[ 21.004082] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 0x0000000080400947 <7>[ 21.004760] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 61440K <7>[ 21.005489] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local memory IO start: 0x0000004000800000 <7>[ 21.006019] i915 0000:00:02.0: [drm:init_stolen_lmem [i915]] Stolen Local DSM base: 0x0000000000800000 <7>[ 21.007782] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6fe0d018 <7>[ 21.008525] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 3.0.0 <7>[ 21.009123] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7>[ 21.009708] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7>[ 21.010240] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7>[ 21.010794] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Mailbox #2 for backlight present <7>[ 21.011361] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 21.012014] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 8 <7>[ 21.012663] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: yes <7>[ 21.013173] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 0: DCLK=2133 tRP=40 tRDPRE=32 tRAS=96 tRCD=40 tRC=136 <7>[ 21.013992] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 1: DCLK=6000 tRP=112 tRDPRE=80 tRAS=0 tRCD=112 tRC=112 <7>[ 21.014667] i915 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [i915]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=16 tRCD=120 tRC=136 <7>[ 21.015466] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 0: num_planes=0 deratedbw=22338 peakbw: 34128 <7>[ 21.016160] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.016784] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.017399] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 0: num_planes=0 deratedbw=25866 peakbw: 34128 <7>[ 21.018021] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.018619] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.019153] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 0: num_planes=0 deratedbw=28082 peakbw: 34128 <7>[ 21.019719] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.020317] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.020905] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 0: num_planes=0 deratedbw=29340 peakbw: 34128 <7>[ 21.021452] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.022027] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.022643] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 0: num_planes=0 deratedbw=30012 peakbw: 34128 <7>[ 21.023161] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.023707] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.024244] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 0: num_planes=0 deratedbw=30359 peakbw: 34128 <7>[ 21.024875] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 96000 <7>[ 21.025480] i915 0000:00:02.0: [drm:tgl_get_bw_info [i915]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 21.027548] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7>[ 21.028537] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT ALDERLAKE-P ", BDB version 252 <7>[ 21.029453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 10, min size 7) <7>[ 21.030244] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 395, min size 5) <7>[ 21.031139] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 100, min size 100) <7>[ 21.031871] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7>[ 21.032555] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 814, min size 812) <7>[ 21.033181] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 34, min size 34) <7>[ 21.033795] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Generating LFP data table pointers <7>[ 21.034453] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7>[ 21.035066] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1366, min size 1366) <7>[ 21.035675] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 305, min size 305) <7>[ 21.036251] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 78, min size 78) <7>[ 21.036839] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 52 (size 822, min size 822) <7>[ 21.037446] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 56 (size 210, min size 210) <7>[ 21.038022] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 21.038751] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7>[ 21.039356] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Expected child device config size for VBT version 252 not known; assuming 39 <7>[ 21.039971] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x1806 <7>[ 21.040517] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7>[ 21.041029] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.041605] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7>[ 21.042177] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.042764] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7>[ 21.043324] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7>[ 21.043881] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.044442] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port A VBT HDMI level shift: 0 <7>[ 21.044985] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.045540] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 0 <7>[ 21.046073] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.046625] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 0 <7>[ 21.047166] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 21.047733] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7>[ 21.048279] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.048838] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port F VBT HDMI level shift: 0 <7>[ 21.049397] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 21.049935] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port G VBT HDMI level shift: 0 <7>[ 21.050510] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 4000000a <7>[ 21.051406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.052348] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7>[ 21.053183] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.054279] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.055147] i915 0000:00:02.0: [drm:icl_display_core_init [i915]] Unknown memory configuration; disabling address buddy logic. <7>[ 21.055978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7>[ 21.056660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 21.057309] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7>[ 21.057997] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <6>[ 21.058633] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 21.058747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_A <7>[ 21.059553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_B <7>[ 21.060100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_C <7>[ 21.060649] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_D <7>[ 21.061391] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/mtl_dmc.bin <7>[ 21.068613] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1 <6>[ 21.076028] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.12) <7>[ 21.077207] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 10 us <7>[ 21.077943] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 21.078541] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 72 (72.0 usec) <7>[ 21.079072] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 75 (75.0 usec) <7>[ 21.079607] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 107 (107.0 usec) <7>[ 21.080056] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 140 (140.0 usec) <7>[ 21.080496] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 161 (161.0 usec) <7>[ 21.117492] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 4 display pipes available. <7>[ 21.125111] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 21.128798] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 652800 kHz <7>[ 21.129553] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] Max dotclock rate: 1305600 kHz <7>[ 21.130427] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:235:DDI A/PHY A] using AUX A (VBT) <7>[ 21.131096] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding eDP connector on [ENCODER:235:DDI A/PHY A] <7>[ 21.132057] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel type (VBT): 2 <7>[ 21.132799] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Selected panel type (VBT): 2 <7>[ 21.133531] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] DRRS supported mode is seamless <7>[ 21.134164] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 21.134866] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT initial LVDS value 300 <7>[ 21.135620] i915 0000:00:02.0: [drm:dump_pnp_id [i915]] Panel PNPID mfg: MS_ (0x7f36), prod: 3, serial: 3, week: 0, year: 2002 <7>[ 21.136344] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Panel name: LFP_PanelName <7>[ 21.137032] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] Seamless DRRS min refresh rate: 0 Hz <7>[ 21.137735] i915 0000:00:02.0: [drm:intel_bios_init_panel [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 21.138532] i915 0000:00:02.0: [drm:intel_pps_init [i915]] [ENCODER:235:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 21.139311] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.139987] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.140608] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.141074] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.141559] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.142175] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.143034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.145267] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 21.146026] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 21.149353] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 00 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 21.151417] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7>[ 21.152163] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] eDP DPCD: 04 83 85 <7>[ 21.153260] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 3 <7>[ 21.156453] i915 0000:00:02.0: [drm:intel_psr_init_dpcd [i915]] PSR2 supported <7>[ 21.160087] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 21.160664] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] FEC CAPABILITY: 0 <7>[ 21.172121] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 21.172162] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 21.172170] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 21.172271] i915 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [i915]] [CONNECTOR:236:eDP-1] using preferred EDID fixed mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.173456] i915 0000:00:02.0: [drm:intel_dp_wait_source_oui [i915]] [CONNECTOR:236:eDP-1] Performing OUI wait (0 ms) <7>[ 21.174559] i915 0000:00:02.0: [drm:intel_panel_init [i915]] [CONNECTOR:236:eDP-1] DRRS type: none <7>[ 21.175109] i915 0000:00:02.0: [drm:cnp_setup_backlight [i915]] [CONNECTOR:236:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 21.175548] i915 0000:00:02.0: [drm:intel_backlight_setup [i915]] [CONNECTOR:236:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 21.175976] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000 <7>[ 21.176272] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000 <7>[ 21.176545] i915 0000:00:02.0: [drm:intel_pps_dump_state [i915]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100 <7>[ 21.176777] i915 0000:00:02.0: [drm:pps_init_delays [i915]] panel power up delay 200, power down delay 50, power cycle delay 600 <7>[ 21.176985] i915 0000:00:02.0: [drm:pps_init_delays [i915]] backlight on delay 1, off delay 200 <7>[ 21.177313] i915 0000:00:02.0: [drm:pps_init_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 21.178121] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:244:DDI B/PHY B] using AUX B (VBT) <7>[ 21.178561] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.179320] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:244:DDI B/PHY B] <7>[ 21.179650] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:244:DDI B/PHY B] Using DDC pin 0x2 (VBT) <7>[ 21.180077] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:262:DDI TC1/PHY TC1] using AUX D (VBT) <7>[ 21.180878] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port D/TC#1: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.181440] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.182174] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:271:DDI TC2/PHY TC2] using AUX E (VBT) <7>[ 21.182634] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port E/TC#2: PHY mode: disconnected (ready: yes, owned: no, HPD: disconnected) <7>[ 21.183174] i915 0000:00:02.0: [drm:intel_tc_port_update_mode [i915]] Port E/TC#2: TC port mode reset (disconnected -> legacy) <7>[ 21.183499] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.183769] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:271:DDI TC2/PHY TC2] Using DDC pin 0xa (VBT) <7>[ 21.184146] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:275:DDI TC3/PHY TC3] using AUX F (VBT) <7>[ 21.184525] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port F/TC#3: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.184901] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.185799] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:284:DDI TC4/PHY TC4] using AUX G (VBT) <7>[ 21.186225] i915 0000:00:02.0: [drm:tc_phy_get_current_mode [i915]] Port G/TC#4: PHY mode: tbt-alt (ready: yes, owned: no, HPD: disconnected) <7>[ 21.186633] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.188240] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:80:pipe A] hw state readout: enabled <7>[ 21.188838] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:131:pipe B] hw state readout: disabled <7>[ 21.189309] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:182:pipe C] hw state readout: disabled <7>[ 21.189771] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:233:pipe D] hw state readout: disabled <7>[ 21.190062] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: enabled, pipe A <7>[ 21.190332] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] hw state readout: disabled, pipe A <7>[ 21.190622] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] hw state readout: disabled, pipe A <7>[ 21.190933] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] hw state readout: disabled, pipe A <7>[ 21.191214] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] hw state readout: disabled, pipe A <7>[ 21.191507] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] hw state readout: disabled, pipe A <7>[ 21.191770] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] hw state readout: disabled, pipe B <7>[ 21.192003] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] hw state readout: disabled, pipe B <7>[ 21.192241] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] hw state readout: disabled, pipe B <7>[ 21.192500] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] hw state readout: disabled, pipe B <7>[ 21.192807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] hw state readout: disabled, pipe B <7>[ 21.193082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] hw state readout: disabled, pipe B <7>[ 21.193326] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] hw state readout: disabled, pipe C <7>[ 21.193595] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] hw state readout: disabled, pipe C <7>[ 21.193828] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] hw state readout: disabled, pipe C <7>[ 21.194036] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] hw state readout: disabled, pipe C <7>[ 21.194243] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] hw state readout: disabled, pipe C <7>[ 21.194482] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] hw state readout: disabled, pipe C <7>[ 21.194706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] hw state readout: disabled, pipe D <7>[ 21.194908] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] hw state readout: disabled, pipe D <7>[ 21.195118] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] hw state readout: disabled, pipe D <7>[ 21.195318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] hw state readout: disabled, pipe D <7>[ 21.195534] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] hw state readout: disabled, pipe D <7>[ 21.195745] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] hw state readout: disabled, pipe D <7>[ 21.196525] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: no, <7>[ 21.196878] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 225, tx_clk_div: 1. <7>[ 21.197132] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 21.197395] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 21.197638] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 21.197848] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 21.198081] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 21.198282] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 21.198524] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 21.198778] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 21.199035] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 21.199360] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:235:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 21.199699] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:244:DDI B/PHY B] hw state readout: disabled, pipe A <7>[ 21.199960] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:246:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.200179] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:247:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.200417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:248:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.200631] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:249:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.200892] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port D/TC#1: sanitize mode (disconnected) <7>[ 21.201192] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:262:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 21.201434] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:264:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.201647] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:265:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.201846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:266:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.202044] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:267:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.202328] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port E/TC#2: sanitize mode (disconnected) <7>[ 21.202598] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:271:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 21.202841] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port F/TC#3: sanitize mode (disconnected) <7>[ 21.203067] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:275:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 21.203282] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:277:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.203508] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:278:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.203718] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:279:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.203916] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:280:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.204128] i915 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [i915]] Port G/TC#4: sanitize mode (disconnected) <7>[ 21.204351] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:284:DDI TC4/PHY TC4] hw state readout: disabled, pipe A <7>[ 21.204580] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:286:DP-MST A] hw state readout: disabled, pipe A <7>[ 21.204787] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:287:DP-MST B] hw state readout: disabled, pipe B <7>[ 21.204982] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:288:DP-MST C] hw state readout: disabled, pipe C <7>[ 21.205177] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:289:DP-MST D] hw state readout: disabled, pipe D <7>[ 21.205691] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:236:eDP-1] hw state readout: enabled <7>[ 21.206037] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:245:DP-1] hw state readout: disabled <7>[ 21.206291] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:257:HDMI-A-1] hw state readout: disabled <7>[ 21.206561] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:263:DP-2] hw state readout: disabled <7>[ 21.206805] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:272:HDMI-A-2] hw state readout: disabled <7>[ 21.207031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:276:DP-3] hw state readout: disabled <7>[ 21.207248] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:285:DP-4] hw state readout: disabled <7>[ 21.207789] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 256910 kHz <7>[ 21.208123] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:40:plane 2A] min_cdclk 0 kHz <7>[ 21.208359] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:49:plane 3A] min_cdclk 0 kHz <7>[ 21.208612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:58:plane 4A] min_cdclk 0 kHz <7>[ 21.208826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:67:plane 5A] min_cdclk 0 kHz <7>[ 21.209031] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:76:cursor A] min_cdclk 0 kHz <7>[ 21.209233] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 2055280 num active planes 1 <7>[ 21.209556] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:82:plane 1B] min_cdclk 0 kHz <7>[ 21.209801] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:91:plane 2B] min_cdclk 0 kHz <7>[ 21.210020] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:100:plane 3B] min_cdclk 0 kHz <7>[ 21.210226] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:109:plane 4B] min_cdclk 0 kHz <7>[ 21.210445] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:118:plane 5B] min_cdclk 0 kHz <7>[ 21.210646] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:127:cursor B] min_cdclk 0 kHz <7>[ 21.210842] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7>[ 21.211129] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:133:plane 1C] min_cdclk 0 kHz <7>[ 21.211394] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:142:plane 2C] min_cdclk 0 kHz <7>[ 21.211619] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:151:plane 3C] min_cdclk 0 kHz <7>[ 21.211826] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:160:plane 4C] min_cdclk 0 kHz <7>[ 21.212035] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:169:plane 5C] min_cdclk 0 kHz <7>[ 21.212235] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:178:cursor C] min_cdclk 0 kHz <7>[ 21.212458] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7>[ 21.212754] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:184:plane 1D] min_cdclk 0 kHz <7>[ 21.213006] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:193:plane 2D] min_cdclk 0 kHz <7>[ 21.213233] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:202:plane 3D] min_cdclk 0 kHz <7>[ 21.213470] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:211:plane 4D] min_cdclk 0 kHz <7>[ 21.213684] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:220:plane 5D] min_cdclk 0 kHz <7>[ 21.213882] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:229:cursor D] min_cdclk 0 kHz <7>[ 21.214075] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe D data rate 0 num active planes 0 <7>[ 21.214945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [setup_hw_state] <7>[ 21.215324] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.215638] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 21.215910] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.216159] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.216415] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.216655] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.216903] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 623587, link_n: 524288, tu: 64 <7>[ 21.217143] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.217397] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.217637] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 21.217863] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.218091] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.218321] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.218558] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.218787] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.219008] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.219228] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.219462] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.219685] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.219901] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.220114] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.220334] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x0, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 21.220636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 21.220897] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.221127] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.221351] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.221585] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.221810] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.222025] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.222242] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.222480] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.222699] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.222913] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.223133] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.223353] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:131:pipe B] enable: no [setup_hw_state] <7>[ 21.223591] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:182:pipe C] enable: no [setup_hw_state] <7>[ 21.223816] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:233:pipe D] enable: no [setup_hw_state] <7>[ 21.224306] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:80:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 21.224615] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:131:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.224872] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:182:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.225096] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:233:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 21.226257] i915 0000:00:02.0: [drm:skl_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fc000000, pitch 11520, size 0x13c6800 <7>[ 21.226659] i915 0000:00:02.0: [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:31:plane 1A] on [CRTC:80:pipe A] <7>[ 21.242391] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [2048K, 832K) <7>[ 21.253925] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [1040K, 832K) <7>[ 21.254423] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [1000, fee00000] <7>[ 21.254692] i915 0000:00:02.0: [drm:i915_gem_init [i915]] No clock gating settings or workarounds applied. <7>[ 21.255012] MCR Steering: L3BANK steering: group=0x0, instance=0x0 <7>[ 21.255019] MCR Steering: DSS steering: group=0x0, instance=0x0 <7>[ 21.255023] MCR Steering: INSTANCE 0 steering: group=0x0, instance=0x0 <7>[ 21.255047] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 GT workarounds on global <7>[ 21.257319] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 engine workarounds on rcs'0 <7>[ 21.257819] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 whitelist workarounds on rcs'0 <7>[ 21.258120] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 context workarounds on rcs'0 <7>[ 21.260907] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on bcs'0 <7>[ 21.261351] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 2 context workarounds on bcs'0 <7>[ 21.262907] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on ccs'0 <7>[ 21.263312] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on ccs'0 <7>[ 21.266781] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.267442] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 24 ext-regs. <7>[ 21.268002] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <6>[ 21.280334] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002) <7>[ 21.333770] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd104f <7>[ 21.334447] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7>[ 21.334944] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4 <7>[ 21.335419] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7>[ 21.335829] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9a4 <7>[ 21.336204] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x7d550008 <7>[ 21.336594] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7>[ 21.336960] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7>[ 21.337312] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7>[ 21.337702] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7>[ 21.338063] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7>[ 21.338444] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7>[ 21.338796] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7>[ 21.339136] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <6>[ 21.341070] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <7>[ 21.353705] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 10ms, freq = 2250MHz, before = 2250MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.356201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6>[ 21.359404] i915 0000:00:02.0: [drm] GT0: GUC: submission enabled <6>[ 21.359423] i915 0000:00:02.0: [drm] GT0: GUC: SLPC enabled <6>[ 21.360411] i915 0000:00:02.0: [drm] GT0: GUC: RC enabled <7>[ 21.379277] MCR Steering: OADDRM steering: group=0x0, instance=0x0 <7>[ 21.379329] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 4 GT workarounds on global <7>[ 21.380980] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'0 <7>[ 21.381554] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'0 <7>[ 21.382959] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vcs'2 <7>[ 21.383483] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vcs'2 <7>[ 21.384829] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 engine workarounds on vecs'0 <7>[ 21.385283] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 1 context workarounds on vecs'0 <7>[ 21.389452] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT1: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7>[ 21.390130] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT1: GUC: capture found 24 ext-regs. <7>[ 21.390728] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT1: GUC: Used 4 KB for temporary ADS regset <7>[ 21.455669] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 0] = 0xd0504f <7>[ 21.456317] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 1] = 0x200000 <7>[ 21.456880] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 2] = 0x4 <7>[ 21.457339] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 3] = 0x3 <7>[ 21.457783] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 4] = 0x220c <7>[ 21.458180] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 5] = 0x7d550008 <7>[ 21.458578] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 6] = 0x0 <7>[ 21.458949] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 7] = 0x0 <7>[ 21.459318] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 8] = 0x0 <7>[ 21.459701] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[ 9] = 0x0 <7>[ 21.460057] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[10] = 0x0 <7>[ 21.460429] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[11] = 0x0 <7>[ 21.460803] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[12] = 0x0 <7>[ 21.461145] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT1: GUC: param[13] = 0x0 <7>[ 21.461540] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT1: HuC: loaded by GSC = no <6>[ 21.463819] i915 0000:00:02.0: [drm] GT1: GuC firmware i915/mtl_guc_70.bin version 70.6.6 <6>[ 21.463844] i915 0000:00:02.0: [drm] GT1: HuC firmware i915/mtl_huc_gsc.bin version 8.5.0 <7>[ 21.481905] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT1: GUC: init took 15ms, freq = 1300MHz, before = 1300MHz, status = 0x8002F034, count = 0, ret = 0 <7>[ 21.482955] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT1: GUC: communication enabled <6>[ 21.491657] i915 0000:00:02.0: [drm] GT1: HuC: authenticated for clear media <6>[ 21.493111] i915 0000:00:02.0: [drm] GT1: GUC: submission enabled <6>[ 21.493125] i915 0000:00:02.0: [drm] GT1: GUC: SLPC enabled <6>[ 21.493450] i915 0000:00:02.0: [drm] GT1: GUC: RC enabled <7>[ 21.500012] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.501488] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.502221] i915 0000:00:02.0: [drm:intel_dp_initial_fastset_check [i915]] [ENCODER:235:DDI A/PHY A] Forcing full modeset to compute PSR state <7>[ 21.502968] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 21.503664] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 21.504137] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 21.504590] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 21.504993] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 21.505361] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 21.505942] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 21.506480] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 7483046/8388608 link 623587/524288, found tu 64, data 7483046/8388608 link 498869/524288) <7>[ 21.507019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 21.507506] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:80:pipe A] fastset requirement not met in port_clock (expected 432000, found 540000) <7>[ 21.507942] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7>[ 21.508499] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 21.509006] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:80:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 21.509615] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0 <7>[ 21.510042] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] ddb ( 0 - 0) -> (4001 - 4096), size 0 -> 95 <7>[ 21.510442] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.510801] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 2, 2, 2, 2, 2, 2, 0, 0, 1, 3, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.511142] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 49, 49, 49, 49, 49, 49, 0, 0, 7, 73, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.511512] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.511894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.512251] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.512655] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.513016] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:40:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.513363] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.513752] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.514104] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.514478] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:49:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.514872] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.515221] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.515624] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.515974] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:58:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.516323] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.516695] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.517054] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.517423] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:67:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.517765] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 21.518092] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.518457] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 21.518806] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:76:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <6>[ 21.519279] i915 0000:00:02.0: [drm] Selective fetch area calculation failed in pipe A <7>[ 21.519299] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [modeset] <7>[ 21.519893] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 21.520400] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 21.520821] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 21.521215] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 21.521644] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 21.522044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 21.522461] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 21.522845] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 21.523233] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 21.523635] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 21.524013] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 21.524023] i915 0000:00:02.0: pixelformat: RGB <7>[ 21.524032] i915 0000:00:02.0: colorimetry: sRGB <7>[ 21.524040] i915 0000:00:02.0: bpc: 0 <7>[ 21.524046] i915 0000:00:02.0: dynamic range: VESA range <7>[ 21.524054] i915 0000:00:02.0: content type: Not defined <7>[ 21.524062] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 21.524458] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.524840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 21.525219] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.525628] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 21.526013] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 21.526407] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 21.526791] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 21.527169] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 21.527592] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 21.527974] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 21.528340] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 21.528849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 21.529300] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 21.529725] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.530112] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.530511] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.530884] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.531260] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.531697] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 21.532086] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.532514] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.532886] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 21.533246] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 21.533653] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7>[ 21.534027] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 21.534416] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 21.534780] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 21.535144] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 21.535522] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 21.538128] i915 0000:00:02.0: [drm:intel_edp_backlight_off [i915]] <6>[ 21.737270] intel-lpss 0000:00:19.1: enabling device (0000 -> 0002) <7>[ 21.741538] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 0 <7>[ 21.742930] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7>[ 21.748594] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power off <7>[ 21.749264] i915 0000:00:02.0: [drm:intel_pps_off_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 21.749853] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 21.800824] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 21.801608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling AUX_A <7>[ 21.803428] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0xffff0072 0x13421c72) <7>[ 21.804132] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 21.804696] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 21.805128] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 21.805541] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 21.805909] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 21.806261] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 21.806628] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 21.806972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 21.807311] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 21.807673] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 21.808012] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 21.808351] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 21.808717] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 21.809056] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 21.809412] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 21.809749] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 21.810078] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 21.810429] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 21.810761] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 21.811088] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 21.811438] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 21.811774] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 21.812165] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 21.812892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling AUX_A <7>[ 21.814864] i915 0000:00:02.0: [drm:intel_dp_128b132b_sdp_crc16 [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] DP2.0 SDP CRC16 for 128b/132b enabled <7>[ 21.815502] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turn panel power on <7>[ 21.816006] i915 0000:00:02.0: [drm:wait_panel_power_cycle [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power cycle <7>[ 22.436765] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7>[ 22.437961] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.438959] i915 0000:00:02.0: [drm:intel_pps_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 22.439906] i915 0000:00:02.0: [drm:wait_panel_status [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 22.640776] i915 0000:00:02.0: [drm:wait_panel_status [i915]] Wait complete <7>[ 22.644438] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD on <7>[ 22.645582] i915 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 22.648994] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 14 c4 41 00 00 01 c0 02 00 00 00 00 0b 80 <7>[ 22.649676] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 22.650997] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7>[ 22.652842] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 22.653828] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 22.656267] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 22.656696] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7>[ 22.659481] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 22.659890] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:236:eDP-1][ENCODER:235:DDI A/PHY A][DPRX] Link Training passed at link rate = 540000, lane count = 4 <7>[ 22.661019] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7>[ 22.662503] i915 0000:00:02.0: [drm:intel_edp_backlight_on [i915]] <7>[ 22.663551] i915 0000:00:02.0: [drm:intel_backlight_enable [i915]] pipe A <7>[ 22.664588] i915 0000:00:02.0: [drm:intel_backlight_set_pwm_level [i915]] [CONNECTOR:236:eDP-1] set backlight PWM = 192000 <7>[ 22.673471] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0xf <7>[ 22.675617] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.676973] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 22.680797] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 22.681914] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 22.682868] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 22.683722] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 22.684530] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 22.685271] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 22.686032] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 22.686792] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 22.687558] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 22.688276] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 22.689089] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <7>[ 22.689950] i915 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [i915]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 22.692002] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x71 0x13421c72) <7>[ 22.694842] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [PLANE:31:plane 1A] no fb, skipping <7>[ 22.696097] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:131:pipe B] not active, skipping <7>[ 22.697085] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:182:pipe C] not active, skipping <7>[ 22.697966] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:233:pipe D] not active, skipping <7>[ 22.698780] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7>[ 22.699713] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7>[ 22.704691] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7>[ 22.705825] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7>[ 22.706630] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7>[ 22.707314] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'2 to vcs1 <7>[ 22.707980] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7>[ 22.708637] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed ccs'0 to ccs0 <7>[ 22.742444] i915 0000:00:02.0: [drm:intel_backlight_device_register [i915]] [CONNECTOR:236:eDP-1] backlight device intel_backlight registered <7>[ 22.744298] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 22.750233] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:236:eDP-1] generating connector hotplug event <7>[ 22.752991] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX B/DDI B/PHY B bus for card0-DP-1 <7>[ 22.756864] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:245:DP-1] generating connector hotplug event <7>[ 22.758901] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:257:HDMI-A-1] generating connector hotplug event <7>[ 22.761158] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-2 <7>[ 22.764880] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:263:DP-2] generating connector hotplug event <7>[ 22.766749] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:272:HDMI-A-2] generating connector hotplug event <7>[ 22.768910] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 22.772702] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:276:DP-3] generating connector hotplug event <7>[ 22.774768] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX USBC4/DDI TC4/PHY TC4 bus for card0-DP-4 <7>[ 22.778529] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:285:DP-4] generating connector hotplug event <6>[ 22.778797] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7>[ 22.793977] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 7 outputs detected <6>[ 22.869967] r8152 4-1:1.0 enxe2015072f33f: carrier on <6>[ 22.875522] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 22.893879] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 22.908056] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7>[ 22.909489] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 22.910401] i915 0000:00:02.0: [drm:intel_audio_init [i915]] aud_ts_cdclk set to M=60, N=768 <7>[ 22.912335] [drm:drm_client_modeset_probe] <7>[ 22.912254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_D <7>[ 22.913193] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 22.913119] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_C <7>[ 22.913296] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 22.913772] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_B <7>[ 22.914419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 22.916164] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7>[ 22.916709] i915 device info: pciid=0x7d55 rev=0x08 platform=METEORLAKE (subplatform=0x2) gen=12 <7>[ 22.916721] i915 device info: graphics version: 12.71 <7>[ 22.916730] i915 device info: media version: 13 <7>[ 22.916738] i915 device info: display version: 14 <7>[ 22.916746] i915 device info: graphics stepping: B0 <7>[ 22.916754] i915 device info: media stepping: C0 <7>[ 22.916761] i915 device info: display stepping: C0 <7>[ 22.916769] i915 device info: base die stepping: ** <7>[ 22.916775] i915 device info: gt: 0 <7>[ 22.916783] i915 device info: memory-regions: 0x41 <7>[ 22.916790] i915 device info: page-sizes: 0x211000 <7>[ 22.916796] i915 device info: platform: METEORLAKE <7>[ 22.916803] i915 device info: ppgtt-size: 48 <7>[ 22.916811] i915 device info: ppgtt-type: 2 <7>[ 22.916818] i915 device info: dma_mask_size: 46 <7>[ 22.916825] i915 device info: is_mobile: no <7>[ 22.916831] i915 device info: is_lp: no <7>[ 22.916838] i915 device info: require_force_probe: yes <7>[ 22.916845] i915 device info: is_dgfx: no <7>[ 22.916852] i915 device info: has_64bit_reloc: yes <7>[ 22.916860] i915 device info: has_64k_pages: no <7>[ 22.916868] i915 device info: gpu_reset_clobbers_display: no <7>[ 22.916872] i915 device info: has_reset_engine: yes <7>[ 22.916881] i915 device info: has_3d_pipeline: yes <7>[ 22.916889] i915 device info: has_4tile: yes <7>[ 22.916897] i915 device info: has_flat_ccs: no <7>[ 22.916904] i915 device info: has_global_mocs: yes <7>[ 22.916911] i915 device info: has_gmd_id: yes <7>[ 22.916921] i915 device info: has_gt_uc: yes <7>[ 22.916932] i915 device info: has_heci_pxp: no <7>[ 22.916940] i915 device info: has_heci_gscfi: no <7>[ 22.916945] i915 device info: has_guc_deprivilege: yes <7>[ 22.916952] i915 device info: has_l3_ccs_read: no <7>[ 22.916960] i915 device info: has_l3_dpf: no <7>[ 22.916967] i915 device info: has_llc: no <7>[ 22.916974] i915 device info: has_logical_ring_contexts: yes <7>[ 22.916982] i915 device info: has_logical_ring_elsq: yes <7>[ 22.916990] i915 device info: has_media_ratio_mode: no <7>[ 22.916999] i915 device info: has_mslice_steering: no <7>[ 22.917003] i915 device info: has_oa_bpc_reporting: yes <7>[ 22.917006] i915 device info: has_oa_slice_contrib_limits: yes <7>[ 22.917013] i915 device info: has_oam: yes <7>[ 22.917020] i915 device info: has_one_eu_per_fuse_bit: no <7>[ 22.917026] i915 device info: has_pxp: yes <7>[ 22.917033] i915 device info: has_rc6: yes <7>[ 22.917039] i915 device info: has_rc6p: no <7>[ 22.917045] i915 device info: has_rps: yes <7>[ 22.917052] i915 device info: has_runtime_pm: yes <7>[ 22.917056] i915 device info: has_snoop: yes <7>[ 22.917059] i915 device info: has_coherent_ggtt: no <7>[ 22.917066] i915 device info: tuning_thread_rr_after_dep: no <7>[ 22.917073] i915 device info: unfenced_needs_alignment: no <7>[ 22.917079] i915 device info: hws_needs_physical: no <7>[ 22.917086] i915 device info: has_pooled_eu: no <7>[ 22.917093] i915 device info: cursor_needs_physical: no <7>[ 22.917099] i915 device info: has_cdclk_crawl: yes <7>[ 22.917106] i915 device info: has_cdclk_squash: yes <7>[ 22.917110] i915 device info: has_ddi: yes <7>[ 22.917114] i915 device info: has_dp_mst: yes <7>[ 22.917121] i915 device info: has_dsb: yes <7>[ 22.917127] i915 device info: has_fpga_dbg: yes <7>[ 22.917133] i915 device info: has_gmch: no <7>[ 22.917140] i915 device info: has_hotplug: yes <7>[ 22.917147] i915 device info: has_hti: no <7>[ 22.917153] i915 device info: has_ipc: yes <7>[ 22.917160] i915 device info: has_overlay: no <7>[ 22.917164] i915 device info: has_psr: yes <7>[ 22.917168] i915 device info: has_psr_hw_tracking: no <7>[ 22.917174] i915 device info: overlay_needs_physical: no <7>[ 22.917180] i915 device info: supports_tv: no <7>[ 22.917186] i915 device info: has_hdcp: yes <7>[ 22.917193] i915 device info: has_dmc: yes <7>[ 22.917199] i915 device info: has_dsc: yes <7>[ 22.917205] i915 device info: rawclk rate: 38400 kHz <7>[ 22.917014] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.917212] i915 device info: iommu: enabled <7>[ 22.917216] i915 device info: available engines: 400003 <7>[ 22.917221] i915 device info: subslice total: 8 <7>[ 22.917224] i915 device info: geometry dss mask=00000000,000000ff <7>[ 22.917228] i915 device info: compute dss mask=00000000,000000ff <7>[ 22.917231] i915 device info: EU total: 128 <7>[ 22.917234] i915 device info: EU per subslice: 16 <7>[ 22.917237] i915 device info: has slice power gating: no <7>[ 22.917240] i915 device info: has subslice power gating: no <7>[ 22.917243] i915 device info: has EU power gating: no <7>[ 22.917245] i915 device info: available engines: 41400 <7>[ 22.917248] i915 device info: subslice total: 8 <7>[ 22.917251] i915 device info: geometry dss mask=00000000,0000ff00 <7>[ 22.917254] i915 device info: compute dss mask=00000000,0000ff00 <7>[ 22.917257] i915 device info: EU total: 128 <7>[ 22.917260] i915 device info: EU per subslice: 16 <7>[ 22.917262] i915 device info: has slice power gating: no <7>[ 22.917265] i915 device info: has subslice power gating: no <7>[ 22.917268] i915 device info: has EU power gating: no <6>[ 22.917271] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6>[ 22.917274] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6>[ 22.917277] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7>[ 22.917531] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 22.918792] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 22.919125] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 22.919484] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 22.919808] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 22.920284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 22.920303] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 22.920317] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 22.920430] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 22.920779] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 22.922227] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 22.922672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 22.923910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] status updated from unknown to connected <7>[ 22.924880] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 22.924924] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.924940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 22.924974] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 22.925948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] status updated from unknown to disconnected <7>[ 22.926041] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 22.926125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.926186] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 22.927050] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] status updated from unknown to disconnected <7>[ 22.927136] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 22.927208] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 22.927269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 22.928585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] status updated from unknown to disconnected <7>[ 22.928693] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 22.928789] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.928866] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 22.929885] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] status updated from unknown to disconnected <7>[ 22.929988] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 22.930080] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 22.930156] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 22.931131] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] status updated from unknown to disconnected <7>[ 22.931219] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 22.931297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 22.931357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 22.932906] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] status updated from unknown to disconnected <7>[ 22.932995] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 22.933076] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 22.933099] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 22.933114] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 22.933127] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 22.933142] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 22.933158] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 22.933172] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 22.933678] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 22.933827] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 22.933854] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 22.933874] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 22.933892] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 22.933962] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 22.934860] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7>[ 22.935098] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7>[ 22.953904] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 2880x1800 fb: 0x01a00000 <6>[ 22.957951] fbcon: i915drmfb (fb0) is primary device <7>[ 22.962954] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:236:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 22.964223] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 30 pixel clock 513820KHz <7>[ 22.965269] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 4 clock 540000 bpp 30 <7>[ 22.966211] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 1926825 available 2160000 <7>[ 22.967087] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:236:eDP-1] SDP split enable: no <7>[ 22.967907] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:80:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 22.968822] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:235:DDI A/PHY A] [CRTC:80:pipe A] <7>[ 22.969780] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 4001), size 0 -> 4001 <7>[ 22.970655] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 22.971461] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 13, 13, 19, 24, 28, 0, 0, 0, 3, 0 <7>[ 22.972286] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 313, 313, 457, 577, 673, 0, 0, 63, 73, 87 <7>[ 22.973121] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 346, 346, 504, 636, 742, 0, 0, 64, 82, 88 <7>[ 22.973884] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] [CRTC:80:pipe A] data rate 2055280 num active planes 1 <7>[ 22.974707] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 0: max bw 22338 required 2159 qgv_peak_bw: 34128 <7>[ 22.975436] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 1: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.976108] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] QGV point 2: max bw 38000 required 2159 qgv_peak_bw: 34128 <7>[ 22.976867] i915 0000:00:02.0: [drm:intel_bw_atomic_check [i915]] Matching peaks QGV bw: 34128 for required data rate: 2159 <7>[ 22.977745] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (40143 kHz) > old min cdclk (0 kHz) <7>[ 22.978534] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:80:pipe A] enable: yes [fastset] <7>[ 22.979320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 22.980090] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 22.980773] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <7>[ 22.981454] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 22.982160] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7>[ 22.982828] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7>[ 22.983694] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 4; data_m: 7483046, data_n: 8388608, link_m: 498869, link_n: 524288, tu: 64 <7>[ 22.985056] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 22.987046] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7>[ 22.988287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 22.989334] i915 0000:00:02.0: DP SDP: VSC, revision 0, length 0 <7>[ 22.989347] i915 0000:00:02.0: pixelformat: RGB <7>[ 22.989355] i915 0000:00:02.0: colorimetry: sRGB <7>[ 22.989362] i915 0000:00:02.0: bpc: 0 <7>[ 22.989434] i915 0000:00:02.0: dynamic range: VESA range <7>[ 22.989449] i915 0000:00:02.0: content type: Not defined <7>[ 22.989459] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: 1, vmax vblank: 0 <7>[ 22.990237] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.991241] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 22.992250] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.993283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x40 0xa <7>[ 22.994273] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=513820, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1878 vs=1803-1809 vt=1878, flags=0xa <7>[ 22.995138] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 540000, pipe src: 2880x1800+0+0, pixel rate 513820 <7>[ 22.996102] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 48, ips linetime: 0 <7>[ 22.996947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 22.997891] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 22.998849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7>[ 22.999756] i915 0000:00:02.0: [drm:intel_dpll_dump_hw_state [i915]] dpll_hw_state: dpll: 0x83d60, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 23.000668] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 23.001538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 23.002403] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.003411] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.004256] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.005350] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.006420] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.007240] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 23.008293] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.009361] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.010437] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 23.011475] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 23.012329] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:237] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 23.013467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 23.014511] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 23.015491] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:40:plane 2A] fb: [NOFB], visible: no <7>[ 23.016436] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:49:plane 3A] fb: [NOFB], visible: no <7>[ 23.017270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:58:plane 4A] fb: [NOFB], visible: no <7>[ 23.018404] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:67:plane 5A] fb: [NOFB], visible: no <7>[ 23.019452] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:76:cursor A] fb: [NOFB], visible: no <7>[ 23.025522] i915 0000:00:02.0: [drm:intel_pmdemand_program_params [i915]] initate pmdemand request values: (0x1550071 0x13421c72) <7>[ 23.027888] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:235:DDI A/PHY A] <7>[ 23.029284] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:244:DDI B/PHY B] <7>[ 23.030675] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:246:DP-MST A] <7>[ 23.031803] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:247:DP-MST B] <7>[ 23.032772] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:248:DP-MST C] <7>[ 23.033717] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:249:DP-MST D] <7>[ 23.034684] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:262:DDI TC1/PHY TC1] <7>[ 23.035674] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:264:DP-MST A] <7>[ 23.036749] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:265:DP-MST B] <7>[ 23.037857] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:266:DP-MST C] <7>[ 23.038981] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:267:DP-MST D] <7>[ 23.040083] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:271:DDI TC2/PHY TC2] <7>[ 23.041197] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:275:DDI TC3/PHY TC3] <7>[ 23.042290] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:277:DP-MST A] <7>[ 23.043466] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:278:DP-MST B] <7>[ 23.044524] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:279:DP-MST C] <7>[ 23.045576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:280:DP-MST D] <7>[ 23.046618] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:284:DDI TC4/PHY TC4] <7>[ 23.047828] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:286:DP-MST A] <7>[ 23.048903] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:287:DP-MST B] <7>[ 23.049943] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:288:DP-MST C] <7>[ 23.050972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:289:DP-MST D] <7>[ 23.063481] i915 0000:00:02.0: [drm:intel_psr_post_plane_update [i915]] Enabling PSR2 <7>[ 23.069730] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.070321] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:80:pipe A] <7>[ 23.073091] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_hw_state: fracen: yes, <7>[ 23.074966] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] quot: 40960, rem: 0, den: 1, <7>[ 23.076351] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] multiplier: 140, tx_clk_div: 0. <7>[ 23.077789] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] c10pll_rawhw_state: <7>[ 23.078979] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] tx: 0x10, cmn: 0x21 <7>[ 23.080333] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 23.081724] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 23.082878] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 23.084526] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7>[ 23.086512] i915 0000:00:02.0: [drm:intel_c10pll_dump_hw_state [i915]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 23.088208] i915 0000:00:02.0: [drm:intel_ddi_get_config [i915]] [ENCODER:235:DDI A/PHY A] Fec status: 0 <6>[ 23.111985] Console: switching to colour frame buffer device 360x112 <6>[ 23.156062] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7>[ 23.184758] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.184878] [drm:drm_client_modeset_probe] <7>[ 23.185905] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.186018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.190397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7>[ 23.191331] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 23.194948] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.195452] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.196770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.197080] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.197413] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.197704] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.198452] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.198467] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.198474] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.198765] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.199230] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.201269] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.201622] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.202940] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.202996] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.203010] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.203047] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.203727] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.203762] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.203789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.204141] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.204168] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.204193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.204695] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.204723] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.204749] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.205247] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.205297] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.205345] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.205959] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.205998] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.206034] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.206554] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.206586] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.206594] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.206598] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.206602] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.206605] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.206609] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.206612] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.206821] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.206860] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.206865] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.206870] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.206873] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.206944] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.229829] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7>[ 23.229987] [drm:drm_client_modeset_probe] <7>[ 23.230202] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] <7>[ 23.230289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:236:eDP-1] <7>[ 23.232553] i915 0000:00:02.0: [drm:intel_dp_get_dsc_sink_cap [i915]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.232934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] FEC CAPABILITY: 0 <7>[ 23.234297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:235:DDI A/PHY A] MST support: port: no, sink: no, modparam: yes <7>[ 23.234779] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000 <7>[ 23.235155] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 216000, 243000, 270000, 324000, 378000, 432000, 540000 <7>[ 23.235535] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000 <7>[ 23.235933] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7>[ 23.235945] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD monitor <7>[ 23.235954] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:236:eDP-1] ELD size 20, SAD count 0 <7>[ 23.235995] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] VRR capable: no <7>[ 23.236312] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 23.237670] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7>[ 23.237939] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:236:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 23.239119] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:236:eDP-1] probed modes : <7>[ 23.239153] [drm:drm_mode_debug_printmodeline] Modeline "2880x1800": 90 513820 2880 2928 2960 3040 1800 1803 1809 1878 0x48 0xa <7>[ 23.239165] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] <7>[ 23.239195] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:245:DP-1] <7>[ 23.239556] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:245:DP-1] disconnected <7>[ 23.239584] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.239610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:257:HDMI-A-1] <7>[ 23.239939] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:257:HDMI-A-1] disconnected <7>[ 23.239967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] <7>[ 23.239997] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:263:DP-2] <7>[ 23.240464] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:263:DP-2] disconnected <7>[ 23.240499] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.240532] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:272:HDMI-A-2] <7>[ 23.241035] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:272:HDMI-A-2] disconnected <7>[ 23.241073] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] <7>[ 23.241108] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:276:DP-3] <7>[ 23.241644] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:276:DP-3] disconnected <7>[ 23.241682] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] <7>[ 23.241722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:285:DP-4] <7>[ 23.242300] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:285:DP-4] disconnected <7>[ 23.242342] [drm:drm_client_modeset_probe] connector 236 enabled? yes <7>[ 23.242350] [drm:drm_client_modeset_probe] connector 245 enabled? no <7>[ 23.242355] [drm:drm_client_modeset_probe] connector 257 enabled? no <7>[ 23.242361] [drm:drm_client_modeset_probe] connector 263 enabled? no <7>[ 23.242399] [drm:drm_client_modeset_probe] connector 272 enabled? no <7>[ 23.242404] [drm:drm_client_modeset_probe] connector 276 enabled? no <7>[ 23.242409] [drm:drm_client_modeset_probe] connector 285 enabled? no <7>[ 23.242511] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 23.242546] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 236 <7>[ 23.242552] [drm:drm_client_modeset_probe] looking for preferred mode on connector 236 0 <7>[ 23.242558] [drm:drm_client_modeset_probe] found mode 2880x1800 <7>[ 23.242564] [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 23.242616] [drm:drm_client_modeset_probe] desired mode 2880x1800 set on crtc 80 (0,0) <7>[ 23.284235] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.285340] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.286410] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.287316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port A <7>[ 23.288164] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.289081] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.289905] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.290686] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7>[ 23.291459] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.292198] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.293008] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.293823] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7>[ 23.294585] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.295316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.296155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.296940] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7>[ 23.297769] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.298490] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.299179] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.299930] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port E <7>[ 23.300752] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.301680] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.302582] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.303480] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port F <7>[ 23.304329] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.305297] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.306257] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.307243] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port G <7>[ 23.308217] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.309183] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.310129] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.311058] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port H <7>[ 23.311973] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.312909] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.313848] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <7>[ 23.314810] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port I <6>[ 23.336601] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4 <6>[ 23.339965] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5 <6>[ 23.342091] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 23.345997] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 23.389528] i915 0000:00:02.0: [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=192000/192000 <7>[ 23.390077] i915 0000:00:02.0: [drm:intel_panel_actually_set_backlight [i915]] [CONNECTOR:236:eDP-1] set backlight level = 192000 <7>[ 26.278707] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 turning VDD off <7>[ 26.279973] i915 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [i915]] [ENCODER:235:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067 <7>[ 26.579004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7>[ 26.580732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 26.582036] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 26.583211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <6>[ 27.558651] systemd-udevd (288) used greatest stack depth: 11832 bytes left <6>[ 27.558789] systemd-udevd (309) used greatest stack depth: 11216 bytes left <7>[ 29.260343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7>[ 29.262085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7>[ 29.275569] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7>[ 29.276977] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7>[ 29.278498] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <4>[ 33.627234] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=678 'systemd' <5>[ 34.071945] systemd-journald[214]: File /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal corrupted or uncleanly shut down, renaming and replacing. <5>[ 34.112876] systemd-journald[214]: Failed to set ACL on /var/log/journal/9a8a5729dd38de7a803effd961f12914/user-1001.journal, ignoring: Operation not supported <6>[ 34.970579] fuse: init (API version 7.38)