igt@i915_pm_rpm@module-reload on fi-skl-guc@linus-v6.5-rc2 Test details

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_client_modeset_commit_atomic+0x234/0x280 drm_client_modeset_commit_locked+0x56/0x190 drm_client_modeset_commit+0x23/0x50 __drm_fb_helper_restore_fbdev_mode_unlocked+0x99/0xd0 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x40 [drm_kms_helper] Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intelfb_create+0x43d/0x5d0 [i915] __drm_fb_helper_initial_config_and_unlock+0x2ee/0x570 [drm_kms_helper] intel_fbdev_initial_config+0xd/0x30 [i915] async_run_entry_fn+0x2f/0x130 process_one_work+0x251/0x500 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] __intel_display_power_put_async+0x38/0x120 [i915] hsw_get_pipe_config+0x150/0xb30 [i915] intel_crtc_get_pipe_config+0x22/0x50 [i915] intel_modeset_verify_crtc+0xc7/0x4e0 [i915] intel_atomic_commit_tail+0x7b5/0xd20 [i915] intel_atomic_commit+0x381/0x400 [i915] drm_atomic_commit+0x95/0xc0 Starting subtest: module-reload Reloading i915 with disable_display=1 mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x64/0x550 [i915] intel_display_driver_probe_noirq+0x9a/0x320 [i915] i915_driver_probe+0x722/0xcf0 [i915] i915_pci_probe+0xdc/0x210 [i915] pci_device_probe+0x98/0x120 really_probe+0x167/0x3c0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 Reloading i915 with mmio_debug=-1 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_hdmi_detect+0xcb/0x160 [i915] drm_helper_probe_detect+0x80/0xa0 [drm_kms_helper] drm_helper_probe_single_connector_modes+0x338/0x510 [drm_kms_helper] drm_mode_getconnector+0x3dc/0x4a0 drm_ioctl_kernel+0xb6/0x150 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] Stack trace: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1215 drm_resources_equal_subtest() #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2605 __igt_unique____real_main2421() #3 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() #4 [__libc_start_main+0xf3] #5 [_start+0x2e] Subtest module-reload: FAIL (16.991s)
Err	Starting subtest: module-reload (i915_pm_rpm:5513) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5513) CRITICAL: Test assertion failure function drm_resources_equal_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1217: (i915_pm_rpm:5513) CRITICAL: Failed assertion: wait_for_suspended() Subtest module-reload failed. ** DEBUG (i915_pm_rpm:5513) DEBUG: Reload w/o display (i915_pm_rpm:5513) igt_kmod-DEBUG: Module snd_hda_intel unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module i915 unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module drm_display_helper unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module drm_kms_helper unloaded immediately (i915_pm_rpm:5513) igt_kmod-INFO: Reloading i915 with disable_display=1 mmio_debug=-1 (i915_pm_rpm:5513) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (i915_pm_rpm:5513) DEBUG: Test requirement passed: drm_fd != -1 (i915_pm_rpm:5513) DEBUG: Test requirement passed: debugfs != -1 (i915_pm_rpm:5513) igt_pm-DEBUG: Audio device path is /sys/class/sound/hwC0D2/device/device/power/control (i915_pm_rpm:5513) igt_pm-DEBUG: Saved audio power management as '0' and 'on' (i915_pm_rpm:5513) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto' (i915_pm_rpm:5513) INFO: Runtime PM support: 1 (i915_pm_rpm:5513) INFO: PC8 residency support: 0 (i915_pm_rpm:5513) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:5513) igt_pm-INFO: DMC: fw loaded: yes (i915_pm_rpm:5513) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs) (i915_pm_rpm:5513) INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_power_domains_init_hw+0x64/0x550 [i915] intel_display_driver_probe_noirq+0x9a/0x320 [i915] i915_driver_probe+0x722/0xcf0 [i915] i915_pci_probe+0xdc/0x210 [i915] pci_device_probe+0x98/0x120 really_probe+0x167/0x3c0 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 (i915_pm_rpm:5513) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 95ms (i915_pm_rpm:5513) igt_device-DEBUG: Test requirement passed: pci_dev (i915_pm_rpm:5513) DEBUG: device_in_pci_d3: PCI D3 state=3 (i915_pm_rpm:5513) DEBUG: device_in_pci_d3(pci_dev) took 0ms (i915_pm_rpm:5513) igt_pm-DEBUG: Restoring runtime PM management to '10000' and 'auto' (i915_pm_rpm:5513) igt_pm-DEBUG: Restoring audio power management to '0' and 'on' (i915_pm_rpm:5513) DEBUG: Reload as normal (i915_pm_rpm:5513) igt_kmod-DEBUG: Module snd_hda_intel unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module i915 unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module drm_display_helper unloaded immediately (i915_pm_rpm:5513) igt_kmod-DEBUG: Module drm_kms_helper unloaded immediately (i915_pm_rpm:5513) igt_kmod-INFO: Reloading i915 with mmio_debug=-1 (i915_pm_rpm:5513) drmtest-DEBUG: Opened previously opened device: /dev/dri/card0 (i915_pm_rpm:5513) DEBUG: Test requirement passed: drm_fd != -1 (i915_pm_rpm:5513) DEBUG: Test requirement passed: debugfs != -1 (i915_pm_rpm:5513) igt_kms-DEBUG: VT: graphics mode set (mode was 0x1) (i915_pm_rpm:5513) igt_kms-DEBUG: display: init { (i915_pm_rpm:5513) igt_chamelium-DEBUG: No configuration file available for chamelium (i915_pm_rpm:5513) igt_kms-DEBUG: display: HDMI-A-1: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: HDMI-A-1: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: HDMI-A-2: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: DP-1: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: HDMI-A-3: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: HDMI-A-3: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: display: DP-2: Selecting pipe None (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: Test requirement passed: !(pipe >= display->n_pipes \|\| !display->pipes[pipe].enabled) (i915_pm_rpm:5513) igt_kms-DEBUG: display: } (i915_pm_rpm:5513) igt_pm-DEBUG: Test requirement passed: fd >= 0 (i915_pm_rpm:5513) igt_pm-DEBUG: Test requirement passed: fd >= 0 (i915_pm_rpm:5513) igt_pm-DEBUG: Test requirement passed: fd >= 0 (i915_pm_rpm:5513) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1200, format=XR24(0x34325258), modifier=0x0, size=0) (i915_pm_rpm:5513) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680) (i915_pm_rpm:5513) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd) (i915_pm_rpm:5513) intel_blt-DEBUG: Test requirement passed: cmds_info (i915_pm_rpm:5513) intel_blt-DEBUG: Test requirement passed: cmds_info (i915_pm_rpm:5513) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS (i915_pm_rpm:5513) igt_pm-DEBUG: Audio device path is /sys/class/sound/hwC0D2/device/device/power/control (i915_pm_rpm:5513) igt_pm-DEBUG: Saved audio power management as '0' and 'on' (i915_pm_rpm:5513) igt_pm-DEBUG: Saved runtime power management as '10000' and 'auto' (i915_pm_rpm:5513) INFO: Runtime PM support: 1 (i915_pm_rpm:5513) INFO: PC8 residency support: 0 (i915_pm_rpm:5513) DEBUG: Test requirement passed: has_runtime_pm (i915_pm_rpm:5513) igt_pm-INFO: DMC: fw loaded: yes (i915_pm_rpm:5513) DEBUG: Test requirement passed: igt_pm_dmc_loaded(debugfs) (i915_pm_rpm:5513) INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 1 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] __intel_wakeref_dec_and_check_tracking+0x4e/0x90 [i915] __intel_runtime_pm_put+0x159/0x2b0 [i915] intel_hdmi_detect+0xcb/0x160 [i915] drm_helper_probe_detect+0x80/0xa0 [drm_kms_helper] drm_helper_probe_single_connector_modes+0x338/0x510 [drm_kms_helper] drm_mode_getconnector+0x3dc/0x4a0 drm_ioctl_kernel+0xb6/0x150 Wakeref count: 1 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] i915_audio_component_get_power+0x19/0x110 [i915] snd_hdac_display_power+0x80/0x120 [snd_hda_core] azx_probe_work+0x9e/0x914 [snd_hda_intel] process_one_work+0x251/0x500 worker_thread+0x4f/0x3a0 kthread+0x101/0x130 (i915_pm_rpm:5513) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 286ms (i915_pm_rpm:5513) igt_device-DEBUG: Test requirement passed: pci_dev (i915_pm_rpm:5513) DEBUG: device_in_pci_d3: PCI D3 state=3 (i915_pm_rpm:5513) DEBUG: device_in_pci_d3(pci_dev) took 0ms (i915_pm_rpm:5513) DEBUG: Test requirement passed: enable_one_screen_with_type(data, SCREEN_TYPE_ANY) (i915_pm_rpm:5513) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 0ms (i915_pm_rpm:5513) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 0ms (i915_pm_rpm:5513) igt_pm-DEBUG: (status = __igt_get_runtime_pm_status(fd)) == expected took 190ms (i915_pm_rpm:5513) igt_pm-WARNING: timeout: pm_status expected:suspended, got:active (i915_pm_rpm:5513) igt_debugfs-INFO: i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: no Usage count: 3 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 3 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] gmbus_xfer+0x29/0xb0 [i915] __i2c_transfer+0x17b/0x580 i2c_transfer+0x7e/0x100 drm_do_probe_ddc_edid+0xb7/0x130 drm_edid_read_ddc+0x72/0x80 intel_hdmi_set_edid+0x242/0x2a0 [i915] Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref x1 taken at: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_set_edid+0x3f/0x2a0 [i915] intel_hdmi_detect+0xb7/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] (i915_pm_rpm:5513) CRITICAL: Test assertion failure function drm_resources_equal_subtest, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1217: (i915_pm_rpm:5513) CRITICAL: Failed assertion: wait_for_suspended() (i915_pm_rpm:5513) igt_core-INFO: Stack trace: (i915_pm_rpm:5513) igt_core-INFO: #0 ../../../usr/src/igt-gpu-tools/lib/igt_core.c:1988 __igt_fail_assert() (i915_pm_rpm:5513) igt_core-INFO: #1 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:1215 drm_resources_equal_subtest() (i915_pm_rpm:5513) igt_core-INFO: #2 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2605 __igt_unique____real_main2421() (i915_pm_rpm:5513) igt_core-INFO: #3 ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2421 main() (i915_pm_rpm:5513) igt_core-INFO: #4 [__libc_start_main+0xf3] (i915_pm_rpm:5513) igt_core-INFO: #5 [_start+0x2e] END ** Subtest module-reload: FAIL (16.991s)
Dmesg	<6> [205.713582] Console: switching to colour dummy device 80x25 <6> [205.713938] [IGT] i915_pm_rpm: executing <7> [205.716747] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [205.717185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [205.717205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [205.717863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.717984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [205.718312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.718446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.718451] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.718567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [205.721703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.721708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [205.721948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [205.722007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [205.722019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [205.735167] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [205.735174] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [205.735487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [205.735612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [205.735906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [205.736037] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [205.736287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [205.736303] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [205.736308] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [205.736312] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [205.736315] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [205.736318] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [205.736322] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [205.736325] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [205.736328] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [205.736331] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [205.736334] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [205.736337] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [205.736341] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [205.736402] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [205.736415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [205.736611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [205.736671] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [205.736684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [205.737015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.737142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [205.737476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.737608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.737615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.737728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [205.740539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.740544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [205.740675] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [205.740739] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [205.740751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [205.741647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [205.742234] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [205.743031] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [205.743042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [205.743179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [205.743323] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [205.743439] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [205.748817] EDID block 0 is all zeroes <7> [205.748821] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [205.748826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748828] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748838] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.748846] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [205.748965] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [205.749667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.749787] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [205.750416] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [205.750431] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [205.750435] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [205.750439] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [205.750442] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [205.750445] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [205.754023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [205.754039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [205.754391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.754510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [205.754805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.754936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.754940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.755052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [205.757861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.757866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [205.757985] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [205.758651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [205.758666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [205.758801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [205.759234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [205.759254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [205.759595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.759713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [205.760016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.760174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.760179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.760340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [205.763222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.763227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [205.763353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [205.763883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [205.763896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [205.764230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.764372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [205.764675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [205.764805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.764809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.764920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [205.767726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [205.767730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [205.767847] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [205.767874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [205.767886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [205.780958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [205.780964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [205.781189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [205.781334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [205.781637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [205.781766] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [205.781978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [205.781991] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [205.781995] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [205.781999] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [205.782002] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [205.782005] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [205.782008] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [205.782011] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [205.782014] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [205.782018] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [205.782021] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [205.782024] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [205.782027] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [205.782051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [205.782063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [205.782209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [205.782234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [205.782246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [205.782634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.782750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [205.783051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [205.783192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.783195] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [205.783343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [205.786151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [205.786155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [205.786273] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [205.786299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [205.786311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [205.787016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [205.787605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [205.788421] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [205.788433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [205.788552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [205.788669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [205.788783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [205.794198] EDID block 0 is all zeroes <7> [205.794202] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [205.794206] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794208] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794210] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794213] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794215] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794217] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794218] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.794225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [205.794344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [205.795028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [205.795161] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [205.795795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [205.795808] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [205.795812] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [205.795816] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [205.795819] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [205.795822] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [205.796196] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:126] <7> [206.828105] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [206.828631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [206.829420] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [206.830115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [206.830493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [206.830636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [206.830779] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [206.830922] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [206.831067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [206.831216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [206.831349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [206.831476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [206.831603] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [206.831729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0) <7> [206.831856] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0) <7> [206.831982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0) <7> [206.832108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0) <7> [206.832254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0) <7> [206.832381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0) <7> [206.832508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [206.832634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [206.832761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [206.832888] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [206.833015] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [206.833155] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [206.833284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0) <7> [206.833411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0) <7> [206.833537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0) <7> [206.833663] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0) <7> [206.833790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0) <7> [206.833917] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0) <7> [206.834043] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [206.834175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [206.834303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [206.834429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [206.834556] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0) <7> [206.834682] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0) <7> [206.834808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0) <7> [206.834933] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [206.835061] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1 <7> [206.835215] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [206.835345] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x1, ddb (669 - 892) -> (0 - 892), active pipes 0x3 -> 0x2 <7> [206.835498] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0 <7> [206.835618] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0 <7> [206.835736] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [206.835854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.835972] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.836090] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.836216] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 860), size 208 -> 860 <7> [206.836334] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 860 - 892), size 15 -> 32 <7> [206.836469] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [206.836598] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [206.836726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [206.836855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [206.836983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [206.837110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [206.837576] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [206.847152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [206.847420] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [206.847584] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 <7> [206.847717] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [206.847840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [206.847969] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [206.848090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [206.848222] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [206.848343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [206.848465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [206.848586] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [206.848716] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [206.848848] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [206.848978] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [206.849107] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [206.854348] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [206.854680] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [206.854916] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [206.854979] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0) <7> [206.855137] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0) <7> [206.855276] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1) <7> [206.855415] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0) <7> [206.855554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0) <7> [206.855693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000) <7> [206.855831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [206.855969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0) <7> [206.856107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0) <7> [206.856249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0) <7> [206.856376] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0) <7> [206.856504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0) <7> [206.856630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0) <7> [206.856756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0) <7> [206.856883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0) <7> [206.857009] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0) <7> [206.857150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0) <7> [206.857335] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0) <7> [206.857523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0) <7> [206.857711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0) <7> [206.857876] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0) <7> [206.858005] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0) <7> [206.858144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0) <7> [206.858274] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0) <7> [206.858401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0) <7> [206.858528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0) <7> [206.858654] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0) <7> [206.858780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0) <7> [206.858907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0) <7> [206.859033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0) <7> [206.859167] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0) <7> [206.859295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [206.859422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [206.859549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [206.859676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [206.859802] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0) <7> [206.859928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0) <7> [206.860054] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0) <7> [206.860186] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [206.860314] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2 <7> [206.860458] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [206.860599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0 <7> [206.860718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0 <7> [206.860838] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [206.860958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.861078] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.861203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [206.861337] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [206.861467] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [206.861595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset] <7> [206.861722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no <7> [206.861849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [206.861975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [206.862415] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B <7> [206.872378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [206.872531] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B] <7> [206.872679] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2 <7> [206.872822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [206.872958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [206.873092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [206.873238] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [206.873371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [206.873503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [206.873635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [206.873773] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [206.873913] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [206.874056] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [206.874206] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [206.874347] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [206.874506] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [206.874744] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [206.895378] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000 <7> [206.895522] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short <7> [206.895779] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short <7> [206.896719] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [206.897325] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [206.898118] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [207.063418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [207.064047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [207.064398] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [207.064703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [207.065398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.066815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [207.072151] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [207.076214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [207.205812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [207.226902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [207.229812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [207.230529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [207.232450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.233486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [207.235069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [207.236434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [207.236657] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [207.237315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [207.237452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [207.237768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [207.237911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [207.237916] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.238040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [207.240875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [207.240880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [207.241010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [207.241034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [207.250021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [207.250223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [207.250360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [207.250502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [207.254660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [207.254667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [207.255627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [207.255753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [207.256318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [207.256764] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [207.256777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.257099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [207.257117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [207.257250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.257804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.257946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [207.257962] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [207.258086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.259093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [207.259218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [207.259758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [207.260227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [207.260231] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [207.260344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [207.273234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [207.273238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [207.273355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.273494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [207.273509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [207.273632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.274036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [207.274481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [207.275932] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [207.276535] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [207.277359] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [207.277371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [207.277494] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [207.277611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [207.277725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [207.282713] EDID block 0 is all zeroes <7> [207.282716] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [207.282722] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282728] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282732] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282734] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282736] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.282744] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [207.282863] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [207.283564] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [207.283682] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [207.284219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [207.284417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [207.284549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [207.285066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [207.285216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [207.427115] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [207.427296] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [207.427414] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [207.427561] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [207.427700] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz <7> [207.427816] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24 <7> [207.427933] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000 <7> [207.428048] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no <7> [207.428181] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [207.428370] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A] <7> [207.428545] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [207.428733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [207.428922] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [207.429110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [207.429284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [207.429416] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [207.429546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [207.429674] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [207.429803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [207.429930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [207.430091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [207.430296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [207.430485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200) <7> [207.430673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235) <7> [207.430863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200) <7> [207.431003] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235) <7> [207.431148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203) <7> [207.431277] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209) <7> [207.431427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [207.431566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [207.431709] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [207.431911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [207.432115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [207.432331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [207.432535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200) <7> [207.432740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235) <7> [207.432895] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200) <7> [207.433035] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235) <7> [207.433270] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203) <7> [207.433412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209) <7> [207.433552] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [207.433696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [207.433899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [207.434105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [207.434325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000) <7> [207.434530] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000) <7> [207.434735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000) <7> [207.434887] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [207.435028] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B] <7> [207.435174] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1) <7> [207.435315] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1) <7> [207.435455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [207.435594] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1) <7> [207.435771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288) <7> [207.435976] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080) <7> [207.436192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [207.436398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640) <7> [207.436598] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800) <7> [207.436747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640) <7> [207.436888] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800) <7> [207.437027] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656) <7> [207.437368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752) <7> [207.437551] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480) <7> [207.437755] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525) <7> [207.437959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480) <7> [207.438175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525) <7> [207.438380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490) <7> [207.438552] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492) <7> [207.438698] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640) <7> [207.438839] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800) <7> [207.438978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640) <7> [207.439117] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800) <7> [207.439271] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656) <7> [207.439421] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752) <7> [207.439624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480) <7> [207.439827] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525) <7> [207.440031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480) <7> [207.440251] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525) <7> [207.440429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490) <7> [207.440570] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492) <7> [207.440710] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [207.440850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [207.440989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [207.441162] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [207.441366] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175) <7> [207.441569] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175) <7> [207.441773] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000) <7> [207.441978] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [207.442210] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3 <7> [207.442350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3 <7> [207.442501] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642 <7> [207.442633] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27 <7> [207.442765] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [207.442894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 <7> [207.443037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 <7> [207.443249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 <7> [207.443443] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208 <7> [207.443635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15 <7> [207.443826] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [207.444002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 <7> [207.444158] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 <7> [207.444289] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 <7> [207.444439] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [207.444580] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz) <7> [207.444729] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz) <7> [207.444936] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [207.445156] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [207.445361] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1 <7> [207.445563] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1 <7> [207.445763] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2 <7> [207.445912] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2 <7> [207.446050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [207.446204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [207.446345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [207.446483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [207.446636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [207.446837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [207.447039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [207.447287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [207.447492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [207.447643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [207.447783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [207.447923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [207.448061] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [207.448217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [207.448376] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [207.448581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000 <7> [207.448786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0 <7> [207.448989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [207.449206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [207.449403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [207.449554] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4 <7> [207.449692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [207.449832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [207.449970] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [207.450108] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.450273] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.450475] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.450677] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [207.450880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [207.451084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [207.451270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [207.451411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [207.451550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [207.451688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset] <7> [207.451827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [207.451966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 <7> [207.452170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [207.452373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [207.452576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [207.452778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [207.452982] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64 <7> [207.453145] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [207.453285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [207.453423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [207.453562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [207.453700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [207.453877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [207.454080] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [207.454296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [207.454501] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [207.454708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175 <7> [207.454884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0 <7> [207.455026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [207.455180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [207.455320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [207.455459] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 <7> [207.455598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [207.455795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [207.455998] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [207.456214] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.456426] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.456595] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [207.456729] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [207.456858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [207.456987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [207.457115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0 <7> [207.457262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [207.457425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [207.457905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [207.458108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [207.458578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [207.459187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [207.459529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [207.459712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [207.459886] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [207.460016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [207.460155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [207.460282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [207.460405] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [207.460527] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [207.460671] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [207.460866] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [207.461061] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [207.461268] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [207.461483] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [207.461632] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 <7> [207.462177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [207.462355] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [207.463978] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B] <7> [207.464111] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2 <7> [207.464387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [207.464612] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [207.465809] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [207.466836] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06 <7> [207.467383] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [207.467563] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [207.467742] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1 <7> [207.468804] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK <7> [207.468980] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2 <7> [207.470741] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful <7> [207.470861] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1 <7> [207.471605] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B <7> [207.488601] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [207.488760] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [207.489160] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [207.489441] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [207.489664] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [207.489968] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <6> [207.491654] [IGT] i915_pm_rpm: starting subtest module-reload <7> [207.653433] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [207.659625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [207.659778] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [207.659907] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [207.660036] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [207.660185] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [207.660371] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [207.660558] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [207.660742] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [207.660930] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [207.742382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [207.742694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [207.744328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [207.744747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [207.745187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [207.745595] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [207.746088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [207.746694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [207.747440] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [207.747931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [207.748451] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [207.748983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [207.749488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [207.749899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [207.750345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0) <7> [207.750683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0) <7> [207.751018] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0) <7> [207.751380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0) <7> [207.751764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0) <7> [207.752189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0) <7> [207.752589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [207.753002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [207.753367] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [207.753701] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [207.754034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [207.754394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [207.754783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0) <7> [207.755114] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0) <7> [207.755581] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0) <7> [207.755982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0) <7> [207.756533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0) <7> [207.757015] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0) <7> [207.757535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [207.758025] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [207.758544] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [207.759049] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [207.759488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0) <7> [207.759897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0) <7> [207.760433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0) <7> [207.760923] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [207.761441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0) <7> [207.761929] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0) <7> [207.762445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1) <7> [207.763007] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0) <7> [207.763388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0) <7> [207.763805] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000) <7> [207.764242] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [207.764655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0) <7> [207.765165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0) <7> [207.765659] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0) <7> [207.766184] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0) <7> [207.766672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0) <7> [207.767188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0) <7> [207.767589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0) <7> [207.767997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0) <7> [207.768445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0) <7> [207.768912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0) <7> [207.769489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0) <7> [207.769978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0) <7> [207.770502] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0) <7> [207.770995] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0) <7> [207.771429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0) <7> [207.771705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0) <7> [207.772026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0) <7> [207.772364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0) <7> [207.772694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0) <7> [207.773052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0) <7> [207.773461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0) <7> [207.773850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0) <7> [207.774260] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0) <7> [207.774685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0) <7> [207.775000] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [207.775345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [207.775674] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [207.776040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [207.776443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0) <7> [207.776764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0) <7> [207.777083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0) <7> [207.777427] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [207.777706] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1 <7> [207.777934] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2 <7> [207.778253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x0 <7> [207.778509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (669 - 892) -> (0 - 0), active pipes 0x3 -> 0x0 <7> [207.778821] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0 <7> [207.779120] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0 <7> [207.779443] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [207.779743] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.780045] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.780390] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.780601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 0), size 208 -> 0 <7> [207.780846] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 0 - 0), size 15 -> 0 <7> [207.781096] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [207.781366] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.781556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.781792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [207.782091] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [207.782411] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [207.782687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [207.782960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [207.783223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [207.783417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [207.783643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset] <7> [207.783868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no <7> [207.784052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [207.784283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [207.784877] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [207.797843] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [207.798020] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 <7> [207.798244] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B <7> [207.806319] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B] <7> [207.806462] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2 <7> [207.806596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [207.806721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [207.806850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [207.806972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [207.807093] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [207.807235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [207.807415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [207.807604] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [207.807799] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [207.807993] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [207.808181] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [207.808315] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [207.808474] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [207.808670] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [207.809028] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [207.809286] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [207.833208] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000 <7> [207.833349] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short <7> [207.833487] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short <7> [207.834154] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [207.834751] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [207.835554] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [207.839268] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [207.898170] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [208.305388] [IGT] Reloading i915 w/o display <5> [208.459538] Setting dangerous option enable_guc - tainting kernel <7> [208.492503] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [208.492729] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [208.492895] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [208.492905] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [208.493060] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [208.493322] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [208.493449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [208.494016] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [208.494150] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [208.494275] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [208.494386] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [208.494390] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [208.495104] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [208.495120] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [208.495297] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [208.495761] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [208.495928] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [208.496072] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [208.496227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [208.496380] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [208.502536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [208.502702] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [208.502855] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [208.503007] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [208.503174] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [208.503298] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [208.503401] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [208.503501] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [208.503599] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [208.503696] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [208.503793] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [208.503889] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [208.503985] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [208.504081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [208.504715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [208.504886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [208.505054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [208.505238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [208.505404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [208.505559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [208.505714] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [208.505868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [208.506022] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [208.506188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [208.506354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [208.506508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [208.506659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [208.506809] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [208.506958] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [208.507111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [208.507277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [208.507443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [208.507596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [208.507745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [208.507896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [208.508045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [208.508205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [208.508367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [208.508518] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [208.508667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [208.508816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [208.508965] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [208.509128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.509336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [208.509505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [208.509660] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [208.509816] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [208.509967] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [208.510118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [208.510336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [208.510487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [208.510637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [208.510795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [208.510979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [208.511153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [208.511313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [208.511464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [208.511645] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [208.512727] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <6> [208.512726] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [208.512732] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <7> [208.513139] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [208.513326] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [208.513473] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [208.513617] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [208.513759] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [208.513899] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [208.514038] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [208.514188] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [208.514328] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [208.514468] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [208.515493] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [208.516928] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [208.517168] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present <7> [208.517412] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [208.517632] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [208.517836] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [208.518301] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default) <7> [208.518486] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [208.518626] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [208.518833] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT) <7> [208.518985] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [208.519302] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [208.519452] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [208.519590] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [208.519797] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT) <7> [208.519948] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [208.520162] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [208.520591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [208.520763] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [208.520931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [208.521082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [208.521247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [208.521399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [208.521549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [208.521698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [208.521846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [208.521993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [208.522153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [208.522303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [208.522453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [208.522602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [208.522750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [208.522892] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [208.523034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [208.523188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [208.523337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [208.523487] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [208.523642] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [208.523795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [208.523947] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [208.524140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [208.524298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [208.524453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [208.524607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [208.524762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [208.524905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [208.525047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [208.525199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [208.525342] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [208.525495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [208.525641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [208.525785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [208.525929] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [208.526081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [208.526238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [208.526383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [208.526526] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [208.526714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [208.526866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [208.527016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [208.527179] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [208.527331] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.527476] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.527618] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [208.529781] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [208.529927] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [208.530048] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [208.530193] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [208.530335] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [208.531378] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [208.531525] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [208.531664] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [208.534092] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [208.534289] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [208.534461] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [208.555158] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [208.555335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [208.555481] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [208.555625] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [208.555769] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [208.555911] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [208.556054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [208.556208] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [208.556351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [208.556493] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [208.556635] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [208.556777] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [208.556919] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [208.557060] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [208.557214] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [208.558374] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [208.558378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [208.564775] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [208.565479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [208.565653] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [208.565655] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [208.574129] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [208.574382] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [208.574528] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [208.574670] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [208.574811] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [208.574969] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [208.575435] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [208.575555] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [208.575665] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [208.575771] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [208.578678] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [208.579213] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [208.579679] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [208.580744] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [208.581253] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [208.581706] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [208.582523] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [208.582593] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [208.584426] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [208.600548] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [208.601291] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input38 <7> [208.601984] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [208.602752] [drm:drm_client_modeset_probe] <7> [208.602708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [208.602958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [208.603106] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [208.603172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [208.603191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [208.603381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [208.603413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [208.603652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [208.603667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [208.603679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [208.603821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected <7> [208.603843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected <7> [208.603862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [208.603880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [208.604087] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [208.604111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [208.604142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [208.604140] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [208.604160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [208.604361] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [208.604365] i915 device info: graphics version: 9 <7> [208.604369] i915 device info: media version: 9 <7> [208.604372] i915 device info: display version: 9 <7> [208.604374] i915 device info: graphics stepping: G0 <7> [208.604368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [208.604377] i915 device info: media stepping: G0 <7> [208.604380] i915 device info: display stepping: G0 <7> [208.604382] i915 device info: base die stepping: <7> [208.604386] i915 device info: gt: 2 <7> [208.604389] i915 device info: memory-regions: 0x21 <7> [208.604392] i915 device info: page-sizes: 0x11000 <7> [208.604394] i915 device info: platform: SKYLAKE <7> [208.604397] i915 device info: ppgtt-size: 48 <7> [208.604399] i915 device info: ppgtt-type: 2 <7> [208.604395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [208.604402] i915 device info: dma_mask_size: 39 <7> [208.604405] i915 device info: is_mobile: no <7> [208.604407] i915 device info: is_lp: no <7> [208.604411] i915 device info: require_force_probe: no <7> [208.604413] i915 device info: is_dgfx: no <7> [208.604416] i915 device info: has_64bit_reloc: yes <7> [208.604411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [208.604419] i915 device info: has_64k_pages: no <7> [208.604421] i915 device info: gpu_reset_clobbers_display: no <7> [208.604426] i915 device info: has_reset_engine: yes <7> [208.604429] i915 device info: has_3d_pipeline: yes <7> [208.604432] i915 device info: has_4tile: no <7> [208.604435] i915 device info: has_flat_ccs: no <7> [208.604438] i915 device info: has_global_mocs: no <7> [208.604440] i915 device info: has_gmd_id: no <7> [208.604443] i915 device info: has_gt_uc: yes <7> [208.604446] i915 device info: has_heci_pxp: no <7> [208.604449] i915 device info: has_heci_gscfi: no <7> [208.604451] i915 device info: has_guc_deprivilege: no <7> [208.604454] i915 device info: has_l3_ccs_read: no <7> [208.604457] i915 device info: has_l3_dpf: no <7> [208.604460] i915 device info: has_llc: yes <7> [208.604462] i915 device info: has_logical_ring_contexts: yes <7> [208.604465] i915 device info: has_logical_ring_elsq: no <7> [208.604467] i915 device info: has_media_ratio_mode: no <7> [208.604470] i915 device info: has_mslice_steering: no <7> [208.604472] i915 device info: has_oa_bpc_reporting: no <7> [208.604475] i915 device info: has_oa_slice_contrib_limits: no <7> [208.604478] i915 device info: has_oam: no <7> [208.604481] i915 device info: has_one_eu_per_fuse_bit: no <7> [208.604484] i915 device info: has_pxp: no <7> [208.604487] i915 device info: has_rc6: yes <7> [208.604489] i915 device info: has_rc6p: no <7> [208.604492] i915 device info: has_rps: yes <7> [208.604495] i915 device info: has_runtime_pm: yes <7> [208.604498] i915 device info: has_snoop: no <7> [208.604500] i915 device info: has_coherent_ggtt: yes <7> [208.604503] i915 device info: tuning_thread_rr_after_dep: no <7> [208.604506] i915 device info: unfenced_needs_alignment: no <7> [208.604509] i915 device info: hws_needs_physical: no <7> [208.604511] i915 device info: has_pooled_eu: no <7> [208.604514] i915 device info: cursor_needs_physical: no <7> [208.604516] i915 device info: has_cdclk_crawl: no <7> [208.604519] i915 device info: has_cdclk_squash: no <7> [208.604521] i915 device info: has_ddi: yes <7> [208.604524] i915 device info: has_dp_mst: yes <7> [208.604526] i915 device info: has_dsb: no <7> [208.604529] i915 device info: has_fpga_dbg: yes <7> [208.604430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [208.604532] i915 device info: has_gmch: no <7> [208.604534] i915 device info: has_hotplug: yes <7> [208.604537] i915 device info: has_hti: no <7> [208.604539] i915 device info: has_ipc: yes <7> [208.604541] i915 device info: has_overlay: no <7> [208.604543] i915 device info: has_psr: yes <7> [208.604545] i915 device info: has_psr_hw_tracking: yes <7> [208.604548] i915 device info: overlay_needs_physical: no <7> [208.604550] i915 device info: supports_tv: no <7> [208.604552] i915 device info: has_hdcp: yes <7> [208.604554] i915 device info: has_dmc: yes <7> [208.604557] i915 device info: has_dsc: no <7> [208.604559] i915 device info: rawclk rate: 24000 kHz <7> [208.604562] i915 device info: iommu: enabled <7> [208.604565] i915 device info: available engines: 40403 <7> [208.604567] i915 device info: slice total: 1, mask=0001 <7> [208.604570] i915 device info: subslice total: 3 <7> [208.604573] i915 device info: slice0: 3 subslices, mask=00000007 <7> [208.604575] i915 device info: slice1: 0 subslices, mask=00000000 <7> [208.604578] i915 device info: slice2: 0 subslices, mask=00000000 <7> [208.604581] i915 device info: EU total: 24 <7> [208.604583] i915 device info: EU per subslice: 8 <7> [208.604585] i915 device info: has slice power gating: no <7> [208.604588] i915 device info: has subslice power gating: no <7> [208.604590] i915 device info: has EU power gating: yes <6> [208.604593] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [208.604595] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [208.604598] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [208.604652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected <7> [208.604678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [208.604695] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [208.604705] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [208.604709] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [208.604713] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [208.604717] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [208.604721] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [208.604838] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [208.604857] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [208.604891] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [208.604920] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [208.606783] [drm:drm_client_modeset_probe] <7> [208.607088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [208.607152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [208.607323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [208.607341] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [208.607357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [208.607476] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected <7> [208.607490] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [208.607501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [208.607619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [208.607631] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [208.607642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [208.607757] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [208.607769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [208.607780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [208.607896] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected <7> [208.607908] [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [208.607915] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [208.607918] [drm:drm_client_modeset_probe] connector 104 enabled? no <7> [208.607920] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [208.607922] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [208.607924] [drm:drm_client_modeset_probe] connector 119 enabled? no <7> [208.608022] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [208.608035] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [208.608056] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <6> [208.608076] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes <6> [208.612716] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [208.612966] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [208.613053] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <6> [208.635581] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 <6> [208.636423] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line <6> [208.636429] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [208.636433] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <6> [208.636437] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [208.636440] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 <6> [208.636443] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [208.636446] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 <6> [208.636450] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 <6> [208.636453] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a <7> [208.663149] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [208.663316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [208.663447] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [208.663575] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [208.663703] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [208.663830] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [208.663957] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [208.664083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [208.664232] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <6> [208.674325] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input39 <6> [208.675690] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40 <6> [208.676901] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41 <6> [208.677687] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42 <6> [208.678717] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input43 <6> [208.680128] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input44 <6> [208.681358] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input45 <6> [208.682325] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input46 <6> [208.687469] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input47 <6> [208.693007] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input48 <7> [209.734431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [209.735824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [209.736545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.737220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.738291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [209.739537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [209.742413] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [209.746242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [209.813786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [209.823021] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [209.824475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [209.824861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [209.824919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [209.825317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [209.825363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [209.825454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [209.825738] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [209.825785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [209.826054] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [209.826027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [209.826084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [209.826378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [209.826392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [209.827100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [209.827735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [209.828222] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [209.841839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [209.842323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [209.842702] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [209.843070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [209.843887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.171470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.171660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [210.172113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.172613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [210.172926] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [210.179981] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [210.180171] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [210.180325] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [210.180476] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [210.180626] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [210.180776] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [210.180925] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [210.181075] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [210.181281] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [210.181866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [210.182329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [210.182537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [210.182698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [210.183265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [210.268861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.269614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [210.270535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [210.271638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [210.272706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [210.273371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [210.274163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [210.274910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [210.310673] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915] <7> [210.383462] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper <6> [210.784393] [IGT] Reloading i915 as normal <5> [210.916380] Setting dangerous option enable_guc - tainting kernel <7> [210.949618] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K <7> [210.949838] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no) <6> [210.950004] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A <7> [210.950014] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH <7> [210.950199] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT <7> [210.950527] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing <7> [210.950754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz <7> [210.951606] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M <7> [210.951786] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M <7> [210.951959] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M <6> [210.952170] i915 0000:00:02.0: [drm] VT-d active for gfx access <6> [210.952177] i915 0000:00:02.0: vgaarb: deactivate vga console <6> [210.953243] i915 0000:00:02.0: [drm] Using Transparent Hugepages <7> [210.953268] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047 <7> [210.953501] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K <7> [210.953982] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018 <7> [210.954283] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0 <7> [210.954494] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported <7> [210.954701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x <7> [210.954942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported <7> [210.959095] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483 <7> [210.959321] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported <7> [210.959529] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported <7> [210.959737] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4) <7> [210.959945] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4 <7> [210.960110] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [210.960286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [210.960445] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no <7> [210.960603] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no <7> [210.960790] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no <7> [210.960916] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no <7> [210.961051] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes <7> [210.961280] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2 <7> [210.961440] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no <7> [210.962068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz <7> [210.962332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206 <7> [210.962599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7) <7> [210.962865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5) <7> [210.963149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100) <7> [210.963377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19) <7> [210.963602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812) <7> [210.963854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34) <7> [210.964115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148) <7> [210.964390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366) <7> [210.964662] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305) <7> [210.964888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78) <7> [210.965109] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0 <7> [210.965369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2 <7> [210.965591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [210.965861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2 <7> [210.966126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6 <7> [210.966405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6 <7> [210.966631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping <7> [210.966852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [210.967098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4 <7> [210.967367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [210.967627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8 <7> [210.967875] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [210.968111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8 <7> [210.968341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [210.968560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0 <7> [210.968805] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02 <7> [210.969072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.969394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1 <7> [210.969690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO <7> [210.969919] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [210.970152] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz <7> [210.970401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz <7> [210.970658] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1 <7> [210.970977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [210.971238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [210.971475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00 <7> [210.971710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [210.971976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [210.972266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B <7> [210.972537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [210.972799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D <7> [210.973111] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin <6> [210.974366] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled <7> [210.974369] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0 <6> [210.974522] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) <7> [210.974749] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [210.974930] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us <7> [210.975076] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec) <7> [210.975264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec) <7> [210.975433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec) <7> [210.975575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec) <7> [210.975715] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec) <7> [210.975855] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec) <7> [210.975995] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec) <7> [210.976142] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec) <7> [210.977634] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available. <7> [210.979043] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0 <7> [210.979280] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present <7> [210.979506] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default) <7> [210.979659] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B] <7> [210.979798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT) <7> [210.980080] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default) <7> [210.980246] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C] <7> [210.980384] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT) <7> [210.980586] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT) <7> [210.980735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D] <7> [210.981036] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [210.981195] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D] <7> [210.981333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT) <7> [210.981537] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT) <7> [210.981686] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E] <7> [210.981885] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported <7> [210.982318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <7> [210.982490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled <7> [210.982656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled <7> [210.982807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A <7> [210.982958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A <7> [210.983108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A <7> [210.983268] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B <7> [210.983417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B <7> [210.983568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B <7> [210.983716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C <7> [210.983863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C <7> [210.984011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C <7> [210.984172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A <7> [210.984321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A <7> [210.984469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A <7> [210.984612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A <7> [210.984753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B <7> [210.984894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C <7> [210.985041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A <7> [210.985202] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1 <7> [210.985357] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [210.985510] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [210.985662] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [210.985844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled <7> [210.986000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled <7> [210.986166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled <7> [210.986320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled <7> [210.986475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled <7> [210.986618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz <7> [210.986760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz <7> [210.986902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz <7> [210.987044] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0 <7> [210.987208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz <7> [210.987354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz <7> [210.987497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz <7> [210.987639] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0 <7> [210.987791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz <7> [210.987937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz <7> [210.988080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz <7> [210.988233] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0 <7> [210.988422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state] <7> [210.988575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state] <7> [210.988726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state] <7> [210.988875] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling <7> [210.989025] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [210.989204] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [210.989355] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [210.991393] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K) <7> [210.991537] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture <7> [210.991657] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000] <7> [210.991789] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0 <7> [210.991930] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global <7> [210.993057] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0 <7> [210.993252] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0 <7> [210.993392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0 <7> [210.995611] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3) <7> [210.995795] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs. <7> [210.995964] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset <7> [211.016761] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f <7> [211.016938] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0 <7> [211.017084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000 <7> [211.017237] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3 <7> [211.017382] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2 <7> [211.017526] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006 <7> [211.017668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0 <7> [211.017810] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0 <7> [211.017951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0 <7> [211.018093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0 <7> [211.018243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0 <7> [211.018385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0 <7> [211.018527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0 <7> [211.018669] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0 <7> [211.018812] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no <6> [211.019959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1 <6> [211.019963] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0 <7> [211.024143] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0 <7> [211.024824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <6> [211.024994] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled <6> [211.024996] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled <7> [211.032295] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV <7> [211.032543] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping <7> [211.032688] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping <7> [211.032830] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping <7> [211.032968] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config <7> [211.033126] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [211.033583] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0 <7> [211.033700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0 <7> [211.033809] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0 <7> [211.033914] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0 <7> [211.036404] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event <7> [211.036722] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event <7> [211.036986] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1 <7> [211.037851] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event <7> [211.038207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event <7> [211.038491] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2 <7> [211.039093] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event <6> [211.039176] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 <7> [211.040739] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected <6> [211.057325] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [211.058041] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input49 <7> [211.058586] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10) <7> [211.059093] [drm:drm_client_modeset_probe] <7> [211.059039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D <7> [211.059291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [211.059523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [211.059507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B <7> [211.059582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [211.059737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E <7> [211.060418] [drm:intel_dsm_detect [i915]] no _DSM method for intel device <7> [211.060665] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9 <7> [211.060669] i915 device info: graphics version: 9 <7> [211.060672] i915 device info: media version: 9 <7> [211.060674] i915 device info: display version: 9 <7> [211.060677] i915 device info: graphics stepping: G0 <7> [211.060679] i915 device info: media stepping: G0 <7> [211.060682] i915 device info: display stepping: G0 <7> [211.060684] i915 device info: base die stepping: <7> [211.060686] i915 device info: gt: 2 <7> [211.060689] i915 device info: memory-regions: 0x21 <7> [211.060691] i915 device info: page-sizes: 0x11000 <7> [211.060694] i915 device info: platform: SKYLAKE <7> [211.060696] i915 device info: ppgtt-size: 48 <7> [211.060699] i915 device info: ppgtt-type: 2 <7> [211.060701] i915 device info: dma_mask_size: 39 <7> [211.060703] i915 device info: is_mobile: no <7> [211.060706] i915 device info: is_lp: no <7> [211.060708] i915 device info: require_force_probe: no <7> [211.060711] i915 device info: is_dgfx: no <7> [211.060713] i915 device info: has_64bit_reloc: yes <7> [211.060715] i915 device info: has_64k_pages: no <7> [211.060717] i915 device info: gpu_reset_clobbers_display: no <7> [211.060719] i915 device info: has_reset_engine: yes <7> [211.060721] i915 device info: has_3d_pipeline: yes <7> [211.060723] i915 device info: has_4tile: no <7> [211.060725] i915 device info: has_flat_ccs: no <7> [211.060727] i915 device info: has_global_mocs: no <7> [211.060729] i915 device info: has_gmd_id: no <7> [211.060732] i915 device info: has_gt_uc: yes <7> [211.060734] i915 device info: has_heci_pxp: no <7> [211.060737] i915 device info: has_heci_gscfi: no <7> [211.060739] i915 device info: has_guc_deprivilege: no <7> [211.060742] i915 device info: has_l3_ccs_read: no <7> [211.060744] i915 device info: has_l3_dpf: no <7> [211.060747] i915 device info: has_llc: yes <7> [211.060749] i915 device info: has_logical_ring_contexts: yes <7> [211.060752] i915 device info: has_logical_ring_elsq: no <7> [211.060754] i915 device info: has_media_ratio_mode: no <7> [211.060757] i915 device info: has_mslice_steering: no <7> [211.060759] i915 device info: has_oa_bpc_reporting: no <7> [211.060762] i915 device info: has_oa_slice_contrib_limits: no <7> [211.060764] i915 device info: has_oam: no <7> [211.060661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.060767] i915 device info: has_one_eu_per_fuse_bit: no <7> [211.060769] i915 device info: has_pxp: no <7> [211.060771] i915 device info: has_rc6: yes <7> [211.060773] i915 device info: has_rc6p: no <7> [211.060775] i915 device info: has_rps: yes <7> [211.060777] i915 device info: has_runtime_pm: yes <7> [211.060779] i915 device info: has_snoop: no <7> [211.060781] i915 device info: has_coherent_ggtt: yes <7> [211.060783] i915 device info: tuning_thread_rr_after_dep: no <7> [211.060785] i915 device info: unfenced_needs_alignment: no <7> [211.060787] i915 device info: hws_needs_physical: no <7> [211.060789] i915 device info: has_pooled_eu: no <7> [211.060791] i915 device info: cursor_needs_physical: no <7> [211.060793] i915 device info: has_cdclk_crawl: no <7> [211.060795] i915 device info: has_cdclk_squash: no <7> [211.060796] i915 device info: has_ddi: yes <7> [211.060798] i915 device info: has_dp_mst: yes <7> [211.060800] i915 device info: has_dsb: no <7> [211.060802] i915 device info: has_fpga_dbg: yes <7> [211.060804] i915 device info: has_gmch: no <7> [211.060806] i915 device info: has_hotplug: yes <7> [211.060808] i915 device info: has_hti: no <7> [211.060810] i915 device info: has_ipc: yes <7> [211.060812] i915 device info: has_overlay: no <7> [211.060814] i915 device info: has_psr: yes <7> [211.060816] i915 device info: has_psr_hw_tracking: yes <7> [211.060817] i915 device info: overlay_needs_physical: no <7> [211.060819] i915 device info: supports_tv: no <7> [211.060821] i915 device info: has_hdcp: yes <7> [211.060822] i915 device info: has_dmc: yes <7> [211.060824] i915 device info: has_dsc: no <7> [211.060826] i915 device info: rawclk rate: 24000 kHz <7> [211.060827] i915 device info: iommu: enabled <7> [211.060829] i915 device info: available engines: 40403 <7> [211.060831] i915 device info: slice total: 1, mask=0001 <7> [211.060834] i915 device info: subslice total: 3 <7> [211.060836] i915 device info: slice0: 3 subslices, mask=00000007 <7> [211.060839] i915 device info: slice1: 0 subslices, mask=00000000 <7> [211.060841] i915 device info: slice2: 0 subslices, mask=00000000 <7> [211.060844] i915 device info: EU total: 24 <7> [211.060846] i915 device info: EU per subslice: 8 <7> [211.060848] i915 device info: has slice power gating: no <7> [211.060850] i915 device info: has subslice power gating: no <7> [211.060852] i915 device info: has EU power gating: yes <6> [211.060854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled <6> [211.060857] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled <6> [211.060859] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled <7> [211.060908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [211.061514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.061743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.061751] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.061955] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [211.065006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.065012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [211.065223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [211.065587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.065752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.065908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.066460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.067009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected <7> [211.067397] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [211.067422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [211.067441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [211.067716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.082794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [211.082802] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [211.083690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.083937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.084600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.085066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.085087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.085344] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to connected <7> [211.085652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [211.085681] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [211.085690] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [211.085696] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [211.085702] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [211.085707] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [211.085713] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [211.085719] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [211.085725] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [211.085731] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.085736] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.085741] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.085747] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [211.085755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [211.085775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [211.086004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.086616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.086859] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected <7> [211.086891] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [211.086910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [211.086929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [211.087159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.087850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.088059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [211.088473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.088935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.088942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.089154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [211.102104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.102110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [211.102296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.102538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected <7> [211.102572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [211.102591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [211.102610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [211.102830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.103433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.104024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.105776] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [211.106446] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [211.107307] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [211.107321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [211.107487] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [211.107630] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [211.107771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [211.112877] EDID block 0 is all zeroes <7> [211.112881] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [211.112888] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112890] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112892] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112894] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112896] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112898] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112901] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112903] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.112912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [211.113066] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [211.113814] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.113959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [211.114548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.114711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.114866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.115419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.115582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to connected <7> [211.115689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [211.115701] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [211.115707] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.115711] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.115715] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.115718] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [211.115722] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [211.115725] [drm:drm_client_modeset_probe] connector 104 enabled? yes <7> [211.115727] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [211.115730] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [211.115732] [drm:drm_client_modeset_probe] connector 119 enabled? yes <7> [211.115853] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [211.115871] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104 <7> [211.115875] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0 <7> [211.115877] [drm:drm_client_modeset_probe] found mode 1920x1200 <7> [211.115879] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119 <7> [211.115882] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0 <7> [211.115884] [drm:drm_client_modeset_probe] found mode 640x480 <7> [211.115886] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [211.115924] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0) <7> [211.115993] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0) <7> [211.116018] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane <7> [211.116071] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one <7> [211.119173] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 1920x1200 fb: 0x00e80000 <6> [211.119816] fbcon: i915drmfb (fb0) is primary device <6> [211.120196] Console: switching to colour frame buffer device 80x30 <6> [211.120209] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device <7> [211.134352] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [211.134372] [drm:drm_client_modeset_probe] <7> [211.134625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [211.134669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [211.134934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.136091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.136270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [211.136836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.138203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.138211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.138352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [211.140298] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [211.152630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.152637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [211.152780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.152949] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [211.152967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [211.152980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [211.153107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.168308] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [211.168317] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [211.168563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.168699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.169307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.169779] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.169794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.170174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [211.170196] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [211.170201] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [211.170205] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [211.170208] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [211.170212] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [211.170216] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [211.170219] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [211.170223] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [211.170226] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.170229] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.170233] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.170236] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [211.170241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [211.170254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [211.170384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.171017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.171198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [211.171220] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [211.171239] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [211.171369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.172280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.172406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [211.172946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.173420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.173427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.173554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [211.186967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.186973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [211.187108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.187272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [211.187296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [211.187316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [211.187443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.187868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.188340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.189859] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [211.190464] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [211.191301] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [211.191314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [211.191449] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [211.191567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [211.191684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [211.196720] EDID block 0 is all zeroes <7> [211.196724] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [211.196730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196733] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196735] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196737] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196739] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196741] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196743] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196745] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.196755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [211.196887] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [211.197593] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.197715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [211.198252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [211.198450] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [211.198582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [211.199100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.199368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [211.199384] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [211.199390] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.199394] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.199398] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.199401] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [211.199405] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [211.199408] [drm:drm_client_modeset_probe] connector 104 enabled? yes <7> [211.199410] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [211.199413] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [211.199415] [drm:drm_client_modeset_probe] connector 119 enabled? yes <7> [211.199502] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [211.199520] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104 <7> [211.199523] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0 <7> [211.199526] [drm:drm_client_modeset_probe] found mode 1920x1200 <7> [211.199528] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119 <7> [211.199530] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0 <7> [211.199533] [drm:drm_client_modeset_probe] found mode 640x480 <7> [211.199535] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config <7> [211.199588] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0) <7> [211.199607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [211.199645] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0) <7> [211.199626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [211.199946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.201179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.201307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [211.201857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.202324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.202329] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.202443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [211.215857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.215862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [211.215986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [211.216127] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [211.216352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <6> [211.216289] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) <7> [211.216375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [211.216610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [211.216759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [211.217238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [211.217717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [211.217997] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [211.231051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [211.231058] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [211.231302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.231430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.231742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.231874] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.232082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [211.232096] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [211.232101] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [211.232104] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [211.232107] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [211.232110] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [211.232113] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [211.232117] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [211.232120] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [211.232135] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.232140] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.232145] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.232150] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [211.232248] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [211.232268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [211.232739] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [211.232837] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [211.232856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [211.233218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.233373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [211.233713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.233858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.233864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.233996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [211.236971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.236977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [211.237112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [211.237203] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [211.237219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [211.238276] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [211.238888] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <6> [211.239740] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 <7> [211.239786] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [211.239806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [211.239995] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [211.240187] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [211.240364] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <6> [211.241063] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line <6> [211.241068] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <6> [211.241072] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <6> [211.241074] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 <6> [211.241077] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0 <6> [211.241080] snd_hda_codec_realtek hdaudioC0D0: inputs: <6> [211.241082] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 <6> [211.241084] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 <6> [211.241087] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a <5> [211.245570] EDID block 0 is all zeroes <7> [211.245574] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [211.245580] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245582] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245589] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245591] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245592] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245594] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245596] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.245605] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [211.245740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [211.246466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.246591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [211.247307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [211.247323] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [211.247328] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.247331] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.247335] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.247338] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [211.249930] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [211.249947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [211.250330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.250454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [211.250771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.250907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.250911] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.251029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [211.254076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.254081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [211.254223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [211.254915] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [211.254929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [211.255077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [211.255550] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [211.255564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [211.255905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.256028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [211.256366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.256502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.256506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.256624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [211.259738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.259743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [211.259862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [211.260398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [211.260413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [211.260755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.260871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [211.261186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [211.261359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.261363] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.261484] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [211.264405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [211.264413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [211.264592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [211.264634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [211.264654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [211.271588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [211.271746] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [211.271884] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B <7> [211.272012] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [211.272155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [211.272290] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C <7> [211.272418] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [211.272545] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [211.272689] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D <7> [211.280852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [211.280862] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [211.281116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.281326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [211.281707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [211.281900] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [211.282220] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [211.282241] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [211.282249] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [211.282255] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [211.282260] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [211.282265] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [211.282271] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [211.282275] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [211.282280] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [211.282284] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.282289] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.282294] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.282299] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [211.282339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [211.282358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [211.282564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [211.282602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [211.282620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [211.283010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <6> [211.283232] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input50 <7> [211.283217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [211.283575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [211.283760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.283766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [211.283933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <6> [211.284698] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input51 <6> [211.285491] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input52 <7> [211.287211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [211.287220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [211.287403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <6> [211.287430] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input53 <7> [211.287451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [211.287471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <6> [211.288216] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input54 <7> [211.288304] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [211.288926] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <6> [211.289554] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input55 <7> [211.289964] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [211.289984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [211.290181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [211.290353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [211.290525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [211.295790] EDID block 0 is all zeroes <7> [211.295795] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [211.295803] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295807] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295810] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295817] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.295838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [211.296026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [211.296750] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [211.296901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <6> [211.297474] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input56 <7> [211.297746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [211.297767] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [211.297775] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [211.297781] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [211.297786] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [211.297792] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [211.298383] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:122] <6> [211.305314] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input57 <6> [211.306102] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input58 <6> [211.317774] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input59 <7> [212.316823] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [212.317648] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [212.318262] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [212.524209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.525651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.526401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.527090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.528252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.529802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.532746] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [212.536251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [212.624275] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [212.624398] [drm:drm_mode_setcrtc] [CONNECTOR:104:HDMI-A-2] <7> [212.624675] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [212.625484] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [212.626109] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [212.626829] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A] <7> [212.627482] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [212.628200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [212.628878] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [212.629770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [212.630606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [212.631331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [212.631966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [212.632631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [212.633279] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [212.633903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [212.634781] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [212.635529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [212.636235] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200) <7> [212.636861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235) <7> [212.637513] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200) <7> [212.638166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235) <7> [212.638788] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203) <7> [212.639619] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209) <7> [212.640518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [212.641192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [212.641885] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [212.642539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [212.643195] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [212.643816] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [212.644595] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200) <7> [212.645412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235) <7> [212.646094] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200) <7> [212.646752] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235) <7> [212.647427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203) <7> [212.648057] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209) <7> [212.648733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [212.649599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [212.650374] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [212.651061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) <7> [212.651724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80000181) <7> [212.652406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a4) <7> [212.653032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [212.653683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000) <7> [212.654449] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000) <7> [212.655364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000) <7> [212.655787] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [212.656321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1 <7> [212.656788] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860 <7> [212.657203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32 <7> [212.657595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [212.657981] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 <7> [212.658523] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 <7> [212.658997] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 <7> [212.659496] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [212.659922] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (9625 kHz) > old min cdclk (0 kHz) <7> [212.660369] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [212.660681] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [212.660994] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1 <7> [212.661319] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1 <7> [212.661633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [212.662044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [212.662440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [212.662752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [212.663092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [212.663422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [212.663731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [212.664038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [212.664362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [212.664753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [212.665120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [212.665438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [212.665703] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [212.665954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [212.666218] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [212.666467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000 <7> [212.666715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0 <7> [212.666971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [212.667336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [212.667594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [212.667844] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4 <7> [212.668113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [212.668378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [212.668626] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [212.668875] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.669139] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.669388] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [212.669669] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [212.669993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:122] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [212.670278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [212.670514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [212.670745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [212.670953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [212.683255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [212.691270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [212.692228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [212.693763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [212.693943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.694400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.694951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [212.695178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [212.695330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [212.695454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [212.695576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [212.695698] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [212.695819] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [212.695940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [212.696061] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [212.696203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [212.696378] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [212.696509] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [212.696681] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [212.696817] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 <7> [212.697258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [212.697445] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [212.714996] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [212.715195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [212.715518] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [212.715750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [212.716322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [212.716432] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [212.716488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [212.716807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [212.716948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [212.716952] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.717066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [212.719923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [212.719928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [212.720198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [212.720239] [drm:drm_mode_setcrtc] [CONNECTOR:104:HDMI-A-2] <7> [212.731698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [212.745002] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [212.745008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [212.745243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [212.745394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.745701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [212.745841] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.745855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [212.745872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [212.746058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [212.746073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [212.746422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [212.746539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [212.746835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [212.746973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [212.746977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.747094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [212.750052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [212.750057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [212.750189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [212.750210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [212.751261] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [212.751872] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [212.752721] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [212.752733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [212.752856] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [212.752974] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [212.753091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [212.758117] EDID block 0 is all zeroes <7> [212.758121] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [212.758141] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758144] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758146] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758148] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758150] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758152] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758154] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758156] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.758165] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [212.758322] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [212.759030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.759160] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [212.759740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [212.759774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [212.759789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [212.760148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [212.760265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [212.760576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [212.760707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [212.760712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.760824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [212.763629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [212.763634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [212.763750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [212.763826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [212.763839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [212.776940] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [212.776945] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [212.777182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [212.777304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [212.777616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [212.777748] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [212.777958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [212.777972] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [212.777976] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [212.777980] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [212.777983] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [212.777986] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [212.777989] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [212.777992] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [212.777995] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [212.777998] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [212.778001] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [212.778004] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [212.778007] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [212.778068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [212.778081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [212.778224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [212.778286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [212.778298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [212.778635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [212.778750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [212.779061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [212.779202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [212.779205] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [212.779318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [212.782112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [212.782116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [212.782240] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [212.782305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [212.782317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [212.783030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [212.783614] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [212.784434] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [212.784447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [212.784568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [212.784685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [212.784801] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [212.789713] EDID block 0 is all zeroes <7> [212.789717] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [212.789722] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789728] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789732] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789735] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789738] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.789745] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [212.789864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [212.790557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [212.790679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [212.791301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [212.791315] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [212.791320] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [212.791324] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [212.791327] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [212.791330] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [212.791468] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [212.791537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0) <7> [212.791672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0) <7> [212.791803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [212.791931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [212.792059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000) <7> [212.792198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [212.792325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0) <7> [212.792453] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0) <7> [212.792579] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0) <7> [212.792706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0) <7> [212.792832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0) <7> [212.792960] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0) <7> [212.793086] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0) <7> [212.793220] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0) <7> [212.793347] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0) <7> [212.793473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0) <7> [212.793600] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0) <7> [212.793727] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0) <7> [212.793853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0) <7> [212.793980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0) <7> [212.794107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0) <7> [212.794242] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0) <7> [212.794370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0) <7> [212.794497] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0) <7> [212.794624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0) <7> [212.794751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0) <7> [212.794877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0) <7> [212.795004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0) <7> [212.795137] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0) <7> [212.795263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0) <7> [212.795390] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [212.795516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0) <7> [212.795644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [212.795771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0) <7> [212.795898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0) <7> [212.796024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0) <7> [212.796161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0) <7> [212.796288] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [212.796415] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1 <7> [212.796559] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [212.796699] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0 <7> [212.796819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0 <7> [212.796937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [212.797056] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.797182] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.797301] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.797437] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [212.797566] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [212.797696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset] <7> [212.797824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no <7> [212.797952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [212.798080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [212.798419] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A <7> [212.815779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C <7> [212.815949] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A] <7> [212.816139] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1 <7> [212.816283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [212.816419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [212.816559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [212.816692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [212.816825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [212.816957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [212.817089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [212.817229] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [212.817372] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [212.817515] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [212.817657] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [212.817798] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [212.817957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [212.818141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [212.818312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.818455] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.818595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.819199] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [212.819284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.819666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.820173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.820316] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.820457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.821024] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [212.821107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [212.821494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [212.821994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [212.822144] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [212.822284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [212.919410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [212.920054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [212.920954] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [212.924137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.023160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [213.023184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.035507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.044201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.045751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.046142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.047381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.047717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [213.048552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.049111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.049143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.049439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [213.063521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.063532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [213.063832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.064956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.065965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [213.066216] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [213.066263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [213.066750] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.073528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.098088] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.103217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.103722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.103857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.118404] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [213.118413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [213.118641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.118811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.119176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.119612] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.119630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.119843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.120763] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.121060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [213.121082] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [213.121089] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [213.121094] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [213.121099] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [213.121104] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [213.121108] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [213.121113] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [213.121117] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [213.121138] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [213.121143] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [213.121147] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [213.121152] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [213.121412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.126182] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.150411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.156359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.156880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.157076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.157991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.158111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [213.158424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.158796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.158801] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.158914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [213.171786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.171791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [213.171910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.172348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.173183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [213.173214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.174135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [213.175575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.199928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.205355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.205822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.205912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.220379] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [213.220387] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [213.221342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.221506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.221814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.222207] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.222226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.222427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.223292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [213.223323] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.224244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [213.225699] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.250064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.254818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.255388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.255564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.256021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.256259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.256593] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [213.256961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.257994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [213.260844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.285256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.293919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.294551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.294760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.295935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.296295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [213.297055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.297645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.297661] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.298022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [213.313074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.313087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [213.313424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.313879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.315289] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.316885] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [213.316989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [213.322624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.347395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.352426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.352970] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.353149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.353700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.354284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.355819] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [213.356562] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [213.357638] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [213.357664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [213.357870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [213.358067] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [213.358284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [213.364246] EDID block 0 is all zeroes <7> [213.364252] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [213.364262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364273] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364276] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364279] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364282] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364286] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.364300] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [213.364503] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [213.365405] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.365606] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [213.366354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.366681] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.366906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.367545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.367842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.368739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [213.369182] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.370403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [213.370427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [213.373152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.397482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.402276] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.402798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.402894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.403304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.403485] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [213.403547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [213.403560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [213.403686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.404615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.404743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [213.405310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.405742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.405747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.405861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [213.418731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.418736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [213.418853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.418998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.419831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [213.419855] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.420817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.423457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.447250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.451025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.451496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.451592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.452550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.452692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [213.453255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.453692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.453697] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.453812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [213.466715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.466720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [213.466838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.466987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.467817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [213.467843] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.468786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [213.471456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.495799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.500795] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.501296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.501455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.516153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [213.516161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [213.516766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.516920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.517505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.517955] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.517971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.518185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.519052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [213.519082] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.520044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [213.522837] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.547206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.553267] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.553802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.553959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.554484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.554785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.555198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [213.555679] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.556697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [213.559480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.582393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.591051] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.591752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.592003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.593228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.593546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [213.594329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.594964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.594976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.595293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [213.610871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.610885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [213.611212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.611666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.613060] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.614694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [213.614794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [213.620123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.644610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.650386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.650893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.651031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.651526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.651992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.653178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [213.653836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [213.654806] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [213.654823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [213.654999] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [213.655186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [213.655396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [213.660813] EDID block 0 is all zeroes <7> [213.660819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [213.660826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660830] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660844] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660847] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.660860] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [213.661034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [213.661890] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.662062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [213.662747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.662947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.663155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.663782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.663999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.664870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [213.664908] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.665933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.668498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.692818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.697776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.698262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.698381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.699321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.699448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [213.700023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.700475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.700482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.700619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [213.713526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.713531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [213.713649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.713798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.714628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [213.714660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.715577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [213.716992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.741345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.747309] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.747776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.747891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.763273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [213.763282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [213.764233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.764426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [213.764747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [213.765151] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [213.765171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.765378] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.766256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [213.766288] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.767223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [213.770005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.794382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.800391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.800925] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.801081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.801604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.801891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.802305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [213.802786] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.803799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [213.806493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.830904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.839295] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.839911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.840149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.841447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.841816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [213.842633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [213.843240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.843253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.843643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [213.858704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [213.858718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [213.859028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.859440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.860518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [213.860924] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.862071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [213.867673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.892111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.897618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.898144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.898316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.898780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.899248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.900447] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [213.901104] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [213.902080] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [213.902097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [213.902292] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [213.902503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [213.902670] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [213.908221] EDID block 0 is all zeroes <7> [213.908227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [213.908234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.908267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [213.908440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [213.909275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.909487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [213.910155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.910390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.910580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.911170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.911426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.912306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [213.912732] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.914030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [213.914056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [213.916184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.940555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.944888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.945372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.945455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.945845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [213.946316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [213.947530] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [213.948113] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [213.948932] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [213.948943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [213.949064] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [213.949188] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [213.949304] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [213.954205] EDID block 0 is all zeroes <7> [213.954208] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [213.954214] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954218] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954219] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954221] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954224] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954226] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.954234] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [213.954353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [213.955045] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [213.955174] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [213.955696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [213.955889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [213.956021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [213.956553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [213.956703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [213.957573] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [213.958187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [213.958204] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [213.958210] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [213.958213] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [213.958217] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [213.958220] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [213.958490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [213.961096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [213.985395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [213.989886] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [213.990362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [213.990471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [213.991419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.991568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [213.992153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [213.992595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [213.992600] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [213.992713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [214.005641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.005646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [214.005766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.005916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.006746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [214.006772] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.007702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [214.009127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.033265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.038211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.038680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.038770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.053553] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [214.053560] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [214.054511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.054679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.054986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.055377] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [214.055397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.055606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.056461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [214.056495] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.057419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [214.058811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.083172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.089225] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.089695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.089803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.090246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.090494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.090860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [214.090890] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.091847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [214.094486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.118852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.123751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.124299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.124493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.125577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.125830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [214.126520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.127018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.127026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.127256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [214.141248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.141258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [214.141475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.141752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.142663] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [214.142704] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.143835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [214.146503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.170924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.176158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.176683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.176832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.177338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.177835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.179049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [214.180483] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [214.181506] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [214.181526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [214.181715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [214.181900] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [214.182081] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [214.187811] EDID block 0 is all zeroes <7> [214.187817] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [214.187826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187848] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.187861] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [214.188046] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.188963] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.189173] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.189890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.190104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.190330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.190968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.191216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.192139] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.193109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [214.193169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [214.195947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.220272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.225320] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.225783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.225879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.226815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.226938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [214.227490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.227910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.227915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.228029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [214.240912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.240917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [214.241035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.241193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.242034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [214.242057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.243008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [214.245495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.269838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.274312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.274773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.274878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.289557] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [214.289565] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [214.290518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.290694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.291014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.291418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [214.291441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.291642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.292486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [214.292515] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.293448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [214.296132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.320462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.326319] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.326854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.327010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.327535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.327822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.328233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [214.328660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.329728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [214.332482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.356945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.365684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.366388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.366712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.367922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.368269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [214.369031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.369620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.369637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.370001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [214.385056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.385070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [214.385401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.385853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.386833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [214.387260] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.388894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [214.394552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.418994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.426039] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.426558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.426698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.427186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.427675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.428913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [214.429584] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [214.430580] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [214.430598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [214.430771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [214.430941] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [214.431139] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [214.436640] EDID block 0 is all zeroes <7> [214.436645] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [214.436653] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436657] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436660] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436663] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436666] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436668] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436671] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436674] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.436686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [214.436859] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.437672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.437847] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.438519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.438753] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.438944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.439538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.439769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.440638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [214.440671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.441692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [214.444143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.468440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.474325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.474787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.474870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.475793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.475913] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [214.476215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.476615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.476622] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.476743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [214.489678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.489684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [214.489803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.489951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.490783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [214.490807] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.491731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [214.494168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.518476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.523865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.524351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.524460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.539629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [214.539637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [214.540589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.540746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.541056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.541488] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [214.541508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.541682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.542519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [214.542544] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.543482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [214.546131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.570452] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.576436] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.576926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.577046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.577513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.577730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.578108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [214.578154] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.579157] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [214.581935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.606340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.615010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.615673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.615925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.617104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.617463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [214.618308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.618979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.618991] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.619323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [214.634848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.634862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [214.635198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.635580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.636560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [214.636971] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.638648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [214.643774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.668290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.675941] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.676501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.676664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.677192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.677671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.678919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [214.679617] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [214.680717] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [214.680747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [214.680959] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [214.681174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [214.681429] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [214.687283] EDID block 0 is all zeroes <7> [214.687289] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [214.687298] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687302] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687305] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687309] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687312] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687315] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687319] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687322] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.687336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [214.687538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.688454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.688657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.689412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.689645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.689867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.690500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.690814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.691734] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [214.692149] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.693196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [214.696039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.720402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.725872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.726357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.726470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.727419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.727548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [214.728135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.728575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.728580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.728695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [214.741596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.741602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [214.741722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.741873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.742704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [214.742730] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.743669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [214.746372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.770719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.775254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.775717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.775816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.791103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [214.791111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [214.792072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.792225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [214.792799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [214.793260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [214.793275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.793484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.794331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [214.794358] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.795291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [214.798050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.822394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.828386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.828893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.829032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.829526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.829779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.830172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [214.830213] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.831175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [214.834049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.858393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.866997] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.867682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.867898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.869091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.869460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [214.870311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [214.870942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.870954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.871275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [214.886418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [214.886432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [214.886742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.887144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.888191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [214.888604] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.890258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [214.895757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.920201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.926288] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.926794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.926933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.927428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [214.927893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [214.929097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [214.929795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [214.930752] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [214.930770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [214.930944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [214.931113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [214.931299] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [214.936974] EDID block 0 is all zeroes <7> [214.936979] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [214.936987] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.936990] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.936993] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.936996] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.936999] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.937002] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.937005] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.937008] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.937019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [214.937210] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [214.938022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [214.938213] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [214.938860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [214.939057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [214.939260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [214.939880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.940098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.940990] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [214.941029] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.941969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [214.944496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [214.968811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [214.973783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [214.974265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [214.974376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [214.975326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.975455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [214.976032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [214.976484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.976491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [214.976629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [214.989540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [214.989547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [214.989668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [214.989816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [214.990647] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [214.990671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [214.991605] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [214.994356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.018699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.023250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.023719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.023824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.038561] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [215.038568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [215.039522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.039681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.039989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.040382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [215.040395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.040572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.041450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [215.041478] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.042401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [215.050351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.074391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.082439] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.082972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.083147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.083681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.083925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.084334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [215.084379] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.085804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [215.091108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.115205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.125458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.125917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.126004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.126612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.126733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [215.127297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.127739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.127746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.127885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [215.140788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.140793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [215.140918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.141069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.141902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [215.141927] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.142868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [215.145447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.169803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.175741] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.176230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.176345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.176806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.177274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.178409] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [215.179030] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [215.179914] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [215.179929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [215.180071] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [215.180226] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [215.180399] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [215.185545] EDID block 0 is all zeroes <7> [215.185550] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [215.185556] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185559] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185562] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185564] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185566] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185569] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185571] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185573] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.185583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [215.185724] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [215.186496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.186637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [215.187238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.187413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.187568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.188109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.188298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.189185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [215.189216] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.190191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [215.192951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.217263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.221711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.222192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.222303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.223245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.223374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [215.223950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.224409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.224414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.224556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [215.237456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.237460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [215.237579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.237728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.238559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [215.238584] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.239508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [215.242131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.266441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.272350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.272818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.272932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.288276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [215.288284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [215.288888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.289030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.289633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.290066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [215.290081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.290269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.291157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [215.291185] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.292104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [215.294881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.319254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.325231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.325768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.325925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.326446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.326733] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.327138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [215.327573] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.328635] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [215.331397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.355805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.364296] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.364914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.365145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.366442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.366815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [215.367610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.368243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.368255] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.368618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [215.383653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.383667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [215.383973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.384383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.385455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [215.385865] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.387495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [215.393085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.417547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.422628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.423151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.423323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.423787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.424257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.425444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [215.426102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [215.427086] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [215.427103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [215.427297] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [215.427508] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [215.427676] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [215.433219] EDID block 0 is all zeroes <7> [215.433225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [215.433233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433242] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.433265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [215.433437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [215.434275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.434484] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [215.435154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.435389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.435578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.436169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.436425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.437299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [215.437336] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.438358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [215.441123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.465456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.469925] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.470404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.470515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.471465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.471598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [215.472178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.472620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.472625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.472740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [215.485642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.485647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [215.485765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.485914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.486744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [215.486768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.487703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [215.489135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.513440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.517929] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.518409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.518521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.532767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [215.532776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [215.533374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.533495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.534045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.534499] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [215.534518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.534689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.535519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [215.535545] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.536470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [215.539126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.563477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.568457] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.568942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.569068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.569531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.569769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.570141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.571101] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [215.571146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [215.573944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.598320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.605418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.606009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.606214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.607408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.607741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [215.608205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.608773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.608783] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.609032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [215.623508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.623519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [215.623771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.624091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.625050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [215.625481] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.627007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [215.629935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.654389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.660367] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.660882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.661024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.661528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.662002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.663180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [215.663850] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [215.664843] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [215.664862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [215.665044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [215.665239] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [215.665456] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [215.671057] EDID block 0 is all zeroes <7> [215.671062] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [215.671071] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671074] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671077] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671080] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671084] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671086] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671089] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671092] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.671105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [215.671309] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [215.672181] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.672395] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [215.673054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.673275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.673514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.674099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.674338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.675263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [215.675300] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.676314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [215.679077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.703375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.708357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.708818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.708901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.709505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.709628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [215.710193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.710634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.710641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.710773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [215.723677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.723682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [215.723799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.723948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.724780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [215.724805] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.725737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [215.727144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.751453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.757418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.757893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.757998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.773236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [215.773243] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [215.774198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.774362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [215.774925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [215.775380] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [215.775394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.775590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.776428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [215.776454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.777378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [215.778808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.803164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.809615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.810101] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.810241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.810717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.810913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.811291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [215.811329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.812294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [215.815063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.839358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.844382] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.844950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.845146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.846347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.846671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [215.847119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [215.847657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.847671] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.847967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [215.862485] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [215.862496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [215.862748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.863067] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.864033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [215.864467] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.865564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [215.868940] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.893406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.898376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.898931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.899100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.899661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [215.900209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [215.901474] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [215.902191] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [215.903294] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [215.903315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [215.903528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [215.903737] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [215.903939] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [215.909874] EDID block 0 is all zeroes <7> [215.909881] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [215.909891] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909895] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909899] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909902] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909906] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909909] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909913] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909916] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.909931] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [215.910170] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [215.911155] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [215.911411] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [215.912174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [215.912459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [215.912690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [215.913340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.913654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.914558] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [215.914984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.916038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [215.918865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.943227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.947672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.948153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.948280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [215.949209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.949341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [215.949911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [215.950370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.950375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [215.950537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [215.963436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [215.963441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [215.963559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [215.963707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [215.964539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [215.964564] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [215.965490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [215.968122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [215.992349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [215.997280] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [215.997748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [215.997852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.012741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [216.012748] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [216.013708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.013840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.014411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.014844] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [216.014858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.015018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.015856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [216.015883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.016850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [216.019164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.043485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.049377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.049862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.049986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.050455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.050696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.051062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [216.051091] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.052060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [216.054884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.079266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.084370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.084938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.085115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.086315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.086576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [216.087019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.087552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.087566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.087868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [216.102357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.102368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [216.102623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.102941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.103884] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [216.104316] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.105450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [216.110787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.135227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.140343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.140897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.141066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.141621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.142157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.143426] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [216.144153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [216.145228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [216.145249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [216.145464] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [216.145672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [216.145878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [216.151840] EDID block 0 is all zeroes <7> [216.151847] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [216.151856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151860] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151864] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151867] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151871] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151875] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151878] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151881] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.151896] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [216.152110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [216.153067] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.153306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [216.154086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.154351] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.154632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.155269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.155596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.156498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [216.156925] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.157976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [216.160514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.184844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.189788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.190274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.190394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.191341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.191469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [216.192042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.192494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.192501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.192639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [216.205508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.205513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [216.205631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.205779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.206610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [216.206635] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.207567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [216.208994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.233345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.237825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.238305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.238422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.253223] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [216.253230] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [216.254146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.254296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.254594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.254964] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [216.254976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.255133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.255992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [216.256015] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.256975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [216.259478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.283833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.289370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.289856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.289982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.290449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.290679] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.291046] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [216.291075] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.292045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [216.294803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.319182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.324287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.324854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.325032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.326225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.326485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [216.326930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.327463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.327477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.327777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [216.342277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.342288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [216.342544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.342864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.343808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [216.344238] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.345393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [216.348180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.372649] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.381514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.382069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.382256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.382835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.383325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.384658] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [216.385367] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [216.386456] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [216.386478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [216.386690] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [216.386896] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [216.387099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [216.393151] EDID block 0 is all zeroes <7> [216.393158] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [216.393167] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393171] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393175] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393179] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393182] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393186] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393189] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393192] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.393207] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [216.393420] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [216.394345] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.394588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [216.395342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.395584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.395818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.396456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.396772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.397679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [216.398104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.399166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [216.402044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.426423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.430930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.431409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.431529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.432464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.432596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [216.433182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.433622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.433627] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.433740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [216.446643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.446648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [216.446765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.446913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.447744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [216.447768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.448716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [216.450138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.473872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.477992] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.478457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.478554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.493210] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [216.493222] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [216.494180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.494391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.494760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.495244] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [216.495265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.495483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.496378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [216.496415] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.497355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [216.498796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.523201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.528227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.528686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.528783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.529195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.529357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.529712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [216.529738] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.530671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [216.532063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.556390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.561418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.561934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.562074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.562768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.562953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [216.563565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.564003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.564010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.564205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [216.577223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.577229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [216.577414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.577643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.578537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [216.578570] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.579502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [216.582171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.606559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.611435] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.612004] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.612202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.612739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.613259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.614516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [216.615192] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [216.616246] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [216.616268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [216.616489] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [216.616705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [216.616919] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [216.622991] EDID block 0 is all zeroes <7> [216.622998] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [216.623008] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623012] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623016] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623019] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623023] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623027] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623030] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623034] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.623050] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [216.623305] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [216.624192] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.624414] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [216.625186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.625438] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.625681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.626339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.626617] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.627526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [216.627567] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.628570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [216.631194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.655568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.659920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.660399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.660496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.661432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.661560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [216.662121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.662572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.662578] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.662702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [216.675616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.675621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [216.675738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.675886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.676717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [216.676741] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.677664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [216.679080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.703373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.707850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.708331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.708428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.723220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [216.723227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [216.724175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.724296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.724847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.725302] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [216.725315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.725464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.726293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [216.726317] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.727243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [216.728656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.752395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.757399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.757867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.757981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.758423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.758614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.758986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [216.759013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.759945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [216.762475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.786833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.795509] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.796146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.796357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.797509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.797845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [216.798355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [216.798889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.798900] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.799167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [216.813683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [216.813694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [216.813955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.814296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.815233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [216.815655] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.817212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [216.820145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.844606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.849631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.850182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.850328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.850829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [216.851313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [216.852630] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [216.853367] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [216.854446] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [216.854478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [216.854730] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [216.854981] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [216.855205] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [216.861184] EDID block 0 is all zeroes <7> [216.861191] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [216.861201] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861205] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861209] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861219] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861226] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.861241] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [216.861454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [216.862360] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [216.862572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [216.863304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [216.863553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [216.863860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [216.864529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.864818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.865721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [216.865760] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.867238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [216.870044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.894387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.899865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.900346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.900429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.901354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.901507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [216.902083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [216.902534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.902539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [216.902653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [216.915595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [216.915601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [216.915720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.915869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.916701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [216.916726] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.917649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [216.919106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.943439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [216.947875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [216.948356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [216.948439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [216.963225] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [216.963231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [216.964180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.964300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [216.964849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [216.965312] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [216.965324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [216.965686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [216.966518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [216.966543] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [216.967470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [216.970067] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [216.994400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.000354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.000825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.000934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.001382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.001577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.002014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [217.002400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.003426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [217.006163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.030517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.039079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.039714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.039924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.041055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.041419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [217.042283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.042921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.042933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.043290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [217.058806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.058820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [217.059146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.059530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.060514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [217.060920] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.062526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [217.067796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.092314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.101482] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.102029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.102211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.102722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.103215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.104519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [217.105182] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [217.106270] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [217.106292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [217.106496] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [217.106714] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [217.106913] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [217.112852] EDID block 0 is all zeroes <7> [217.112859] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [217.112870] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112876] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112880] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112884] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112887] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112890] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112894] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112897] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.112912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [217.113115] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [217.114019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.114244] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [217.114983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.115272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.115496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.116138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.116393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.117285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [217.117321] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.118766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [217.121469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.145800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.149920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.150398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.150482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.151413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.151567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [217.152153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.152595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.152600] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.152714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [217.165643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.165649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [217.165769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.165917] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.166746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [217.166771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.167704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [217.170170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.194494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.199338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.199797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.199887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.214749] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [217.214756] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [217.215700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.215830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.216158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.216570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [217.216590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.216750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.217586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [217.217611] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.218554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [217.221332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.245688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.251613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.252102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.252239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.252749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.252968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.253363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [217.253794] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.254843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [217.257166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.281567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.289932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.290589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.290841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.292021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.292380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [217.293185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.293826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.293838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.294156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [217.309299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.309312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [217.309619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.310003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.311435] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.312909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [217.313013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [217.318664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.343194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.350951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.351510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.351674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.352203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.352719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.353993] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [217.354715] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [217.355781] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [217.355801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [217.356006] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [217.356225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [217.356473] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [217.362430] EDID block 0 is all zeroes <7> [217.362438] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [217.362448] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362455] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362459] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362462] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362465] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362469] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362472] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362476] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.362490] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [217.362696] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [217.363639] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.363845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [217.364598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.364876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.365101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.365748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.366046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.366959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [217.367000] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.367971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [217.373107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.397483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.401851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.402331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.402443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.403391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.403519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [217.404092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.404544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.404551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.404688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [217.417592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.417598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [217.417718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.417866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.418699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [217.418724] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.419656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [217.422393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.446735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.452744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.453225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.453349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.468142] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [217.468150] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [217.469093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.469235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.469826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.470282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [217.470295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.470471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.471342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [217.471370] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.472293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [217.475036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.499401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.504452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.504936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.505062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.505534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.505805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.506197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [217.506239] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.507269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [217.510084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.534443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.542952] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.543658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.543911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.545090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.545447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [217.546279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.546955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.546967] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.547299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [217.562834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.562848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [217.563190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.563575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.564554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [217.564966] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.566703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [217.572134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.596597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.601670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.602191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.602371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.602829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.603297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.604469] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [217.605153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [217.606148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [217.606168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [217.606402] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [217.606573] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [217.606740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [217.612220] EDID block 0 is all zeroes <7> [217.612225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [217.612233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612237] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.612266] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [217.612437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [217.613267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.613469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [217.614115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.614328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.614549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.615162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.615414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.616288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [217.616327] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.617353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [217.620126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.644456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.648852] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.649332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.649444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.650395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.650524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [217.651105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.651558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.651564] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.651702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [217.664607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.664612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [217.664730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.664879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.665710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [217.665734] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.666674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [217.669413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.693757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.699740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.700226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.700350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.715857] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [217.715865] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [217.716825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.716956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.717532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.717959] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [217.717973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.718146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.718998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [217.719023] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.719981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [217.722453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.746803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.751749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.752275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.752443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.752908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.753136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.753486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [217.753853] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.754894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [217.757142] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.781496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.790143] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.790813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.791063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.792292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.792610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [217.793395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [217.794034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.794046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.794364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [217.809470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [217.809483] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [217.809790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.810194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.811284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [217.811692] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.813333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [217.818823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.843325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.853526] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.854071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.854255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.854803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [217.855278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [217.856580] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [217.857300] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [217.858364] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [217.858385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [217.858588] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [217.858787] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [217.858984] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [217.864857] EDID block 0 is all zeroes <7> [217.864864] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [217.864874] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864881] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864885] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864888] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864892] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864895] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864899] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864902] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.864916] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [217.865119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [217.866049] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [217.866277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [217.867049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [217.867303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [217.867595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [217.868229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.868527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.869426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [217.869854] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.870949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [217.876101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.900431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.904901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.905378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.905490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.906440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.906568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [217.907152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [217.907594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.907599] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [217.907714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [217.920616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [217.920621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [217.920740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.920888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.921719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [217.921743] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.922683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [217.925420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [217.949775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [217.954314] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [217.954775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [217.954880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [217.969783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [217.969790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [217.970411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.970545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [217.971106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [217.971552] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [217.971572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [217.971757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [217.972595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [217.972624] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [217.973562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [217.976294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.000545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.005492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.005998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.006176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.006674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.006893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.007286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [218.007329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.008309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [218.011175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.035559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.044022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.044630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.044810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.045975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.046343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [218.047105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.047721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.047737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.048100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [218.063625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.063639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [218.063949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.064358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.065435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [218.065845] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.067010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [218.072610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.097055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.102618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.103150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.103340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.103795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.104265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.105442] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [218.106099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [218.107067] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [218.107085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [218.107272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [218.107479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [218.107649] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [218.113214] EDID block 0 is all zeroes <7> [218.113219] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [218.113228] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113231] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113237] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.113260] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [218.113435] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [218.114267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.114479] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [218.115145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.115378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.115567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.116164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.116441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.117321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [218.117364] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.118345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [218.121148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.145421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.150838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.151330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.151433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.152382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.152509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [218.153082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.153534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.153541] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.153680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [218.166584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.166590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [218.166708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.166857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.167694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [218.167719] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.168662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [218.171372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.195723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.200258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.200739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.200854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.215770] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [218.215779] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [218.216739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.216883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.217456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.217904] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [218.217919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.218096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.218943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [218.218971] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.219932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [218.222495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.246857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.251709] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.252221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.252377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.252842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.253060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.253514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [218.253893] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.254948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [218.257174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.281486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.290986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.291659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.291876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.293086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.293452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [218.294314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.294945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.294957] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.295274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [218.310415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.310429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [218.310736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.311119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.312537] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.314105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [218.314191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [218.319642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.344083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.349131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.349639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.349778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.350286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.350759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.351956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [218.352649] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [218.353630] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [218.353651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [218.353826] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [218.353996] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [218.354194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [218.359804] EDID block 0 is all zeroes <7> [218.359809] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [218.359817] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359838] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.359850] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [218.360023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [218.360901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.361076] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [218.361758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.361957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.362165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.362779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.362997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.363867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [218.363906] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.364915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [218.367462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.391758] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.395954] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.396432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.396552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.397498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.397618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [218.398178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.398619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.398624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.398738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [218.411639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.411644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [218.411763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.411910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.412747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [218.412772] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.413689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [218.415105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.439409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.444863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.445359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.445450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.460262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [218.460270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [218.461223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.461353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.461912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.462373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [218.462390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.462591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.463468] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [218.463493] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.464426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [218.467095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.491369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.496385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.496874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.496993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.497461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.497678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.498056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [218.498087] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.499069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [218.501931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.526323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.532341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.533046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.533321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.534544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.534877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [218.535396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.535930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.535941] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.536208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [218.550751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.550762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [218.551019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.551362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.552300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [218.552721] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.554265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [218.557132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.581601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.588089] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.588617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.588762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.589259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.589711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.590936] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [218.591592] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [218.592608] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [218.592627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [218.592807] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [218.592982] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [218.593192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [218.598823] EDID block 0 is all zeroes <7> [218.598828] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [218.598837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598840] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598849] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598852] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598855] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598858] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.598871] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [218.599051] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [218.599897] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.600077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [218.600757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.601002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.601264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.601891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.602149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.603015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [218.603048] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.604065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [218.606858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.631196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.636197] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.636663] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.636746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.637660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.637778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [218.638077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.638490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.638497] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.638612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [218.651518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.651524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [218.651643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.651791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.652620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [218.652645] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.653569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [218.655019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.679300] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.684301] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.684762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.684852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.699743] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [218.699751] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [218.700693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.700824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.701149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.701563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [218.701583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.701747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.702583] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [218.702608] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.703556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [218.705020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.729396] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.734391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.734863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.734970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.735417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.735612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.735977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [218.736005] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.736978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [218.739136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.763514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.768440] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.768987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.769161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.770235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.770560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [218.771067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [218.771600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.771615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.771875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [218.786412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [218.786424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [218.786678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.787000] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.787945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [218.787992] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.789096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [218.792048] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.816525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.821447] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.821983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.822148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.822651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [218.823119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [218.824415] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [218.825158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [218.826179] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [218.826200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [218.826491] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [218.826740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [218.826990] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [218.833052] EDID block 0 is all zeroes <7> [218.833059] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [218.833069] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833073] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833077] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833080] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833084] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833088] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833091] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833095] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.833109] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [218.833350] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [218.834258] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [218.834472] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [218.835257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [218.835503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [218.835746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [218.836399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.836664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.837582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [218.837993] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.839054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [218.841849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.866182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.871667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.872153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.872237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.873163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.873311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [218.873863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [218.874325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.874330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [218.874473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [218.887364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [218.887369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [218.887488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.887636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.888465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [218.888490] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.889418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [218.890808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.915167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.921079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.921552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.921655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.936508] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [218.936515] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [218.937463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.937625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [218.937931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [218.938321] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [218.938338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.938538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.939395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [218.939425] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.940346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [218.943135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [218.967450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [218.973355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [218.973862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [218.974001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [218.974497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [218.974752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [218.975146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [218.976098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [218.976147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [218.978951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.003346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.012048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.012735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.012952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.014160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.014470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [219.015249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.015879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.015891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.016233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [219.031777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.031791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [219.032098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.032505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.033578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [219.033989] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.035169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [219.038184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.062599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.068378] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.068869] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.068989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.069472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.069948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.071168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [219.071829] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [219.072802] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [219.072823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [219.072998] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [219.073200] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [219.073424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [219.078985] EDID block 0 is all zeroes <7> [219.078990] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [219.078998] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079001] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079005] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079007] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079010] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079013] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079016] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079019] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.079031] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [219.079226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [219.080088] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.080277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [219.080963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.081178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.081405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.081984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.082235] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.083141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.084098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [219.084156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [219.086938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.111282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.116277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.116737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.116832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.117766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.117884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [219.118426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.118878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.118883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.118996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [219.131904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.131909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [219.132027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.132193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.133023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [219.133054] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.133975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [219.136476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.160827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.165331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.165801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.165914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.180382] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [219.180390] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [219.181343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.181500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.181832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.182248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.182264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.182451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.183326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [219.183353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.184271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [219.187032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.211388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.217390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.217924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.218081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.218599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.218861] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.219289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [219.219329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.220286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [219.223200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.247602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.257769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.258473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.258724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.259953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.260308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [219.261094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.261705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.261717] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.262038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [219.277098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.277109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [219.277463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.277875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.278887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [219.279309] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.280843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [219.286076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.310485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.316317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.316824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.316962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.317462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.317926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.319118] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [219.319796] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [219.320749] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [219.320766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [219.320942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [219.321113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [219.321303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [219.326811] EDID block 0 is all zeroes <7> [219.326817] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [219.326824] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326828] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.326857] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [219.327030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [219.327880] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.328052] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [219.328737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.328938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.329148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.329779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.329997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.330869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [219.330908] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.331924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [219.334466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.358786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.363774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.364260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.364373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.365322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.365450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [219.366027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.366480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.366487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.366624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [219.379531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.379536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [219.379655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.379803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.380631] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [219.380656] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.381590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [219.384168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.408512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.413881] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.414366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.414491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.429115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [219.429123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [219.430083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.430222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.430784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.431238] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.431251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.431442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.432279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [219.432304] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.433231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [219.435984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.460353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.465945] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.466464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.466604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.467071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.467320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.467620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [219.468012] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.469055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [219.471905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.496294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.506013] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.506715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.506966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.508202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.508517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [219.509299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.509933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.509945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.510260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [219.525399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.525412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [219.525717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.526103] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.527522] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.528996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [219.529099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [219.534656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.559097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.565082] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.565602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.565742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.566226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.566705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.567894] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [219.568606] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [219.569581] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [219.569599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [219.569772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [219.569942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [219.570111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [219.575626] EDID block 0 is all zeroes <7> [219.575632] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [219.575640] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575643] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575646] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575649] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575652] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575655] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575657] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575660] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.575672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [219.575847] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [219.576709] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.576881] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [219.577538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.577736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.577926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.578523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.578780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.579652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [219.579691] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.580725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [219.583474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.607792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.612780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.613266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.613379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.614327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.614457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [219.615031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.615483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.615489] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.615627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [219.628535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.628540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [219.628657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.628805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.629635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [219.629660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.630592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [219.633340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.657682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.662688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.663165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.663300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.677732] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [219.677739] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [219.678222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.678381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.678689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.679068] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.679082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.679252] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.680117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [219.680149] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.681069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [219.683829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.708182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.714234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.714742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.714881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.715364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.715633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.716012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [219.716044] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.717033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [219.719895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.744294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.753059] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.753765] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.754016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.755242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.755635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [219.756500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [219.757260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.757275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.757732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [219.773809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [219.773826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [219.774230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.774800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.775841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [219.776272] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.778076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [219.783860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.808342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.814346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.814843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.814978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.815465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [219.815922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [219.817111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [219.817784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [219.818740] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [219.818757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [219.818925] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [219.819087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [219.819259] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [219.824800] EDID block 0 is all zeroes <7> [219.824806] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [219.824814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824819] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.824849] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [219.825015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [219.825855] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [219.826022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [219.826696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [219.826889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [219.827072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [219.827661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.827907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.828775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [219.828811] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.829819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [219.832498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.856807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.861777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.862263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.862375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.863325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.863454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [219.864028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [219.864481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.864488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [219.864626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [219.877502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [219.877507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [219.877626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.877774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.878604] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [219.878629] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.879560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [219.882307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.906661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.912579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.913050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.913178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.928084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [219.928093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [219.928704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.928847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [219.929176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [219.929600] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [219.929615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.929791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.930637] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [219.930667] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.931616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [219.934356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.958718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [219.963701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [219.964230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [219.964401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [219.964863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [219.965080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [219.965549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [219.965912] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [219.966946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [219.969170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [219.993544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.002265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.002946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.003239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.004536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.004909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [220.005721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.006466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.006481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.006851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [220.022951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.022968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [220.023421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.023989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.025487] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.027026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [220.027118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.032586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.057020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.062121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.062633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.062766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.063245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.063714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.064910] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [220.065605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [220.066609] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [220.066630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [220.066799] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [220.066961] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [220.067121] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [220.072607] EDID block 0 is all zeroes <7> [220.072613] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [220.072621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072626] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072633] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072636] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072639] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072642] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072644] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.072656] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [220.072823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [220.073665] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.073832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [220.074497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.074690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.074874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.075460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.075707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.076572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [220.076609] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.077606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.080376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.104689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.109683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.110168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.110296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.111228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.111357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [220.111932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.112391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.112397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.112538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [220.125437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.125442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [220.125561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.125710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.126539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [220.126564] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.127490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.130091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.154394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.159947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.160427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.160552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.175173] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [220.175180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [220.176118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.176259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.176849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.177303] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [220.177318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.177500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.178361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [220.178389] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.179313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.182025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.206393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.212385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.212894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.213033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.213525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.213780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.214172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [220.214214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.215216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.218071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.242447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.250978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.251683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.251935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.253176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.253511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [220.254293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.254926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.254938] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.255259] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [220.270372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.270385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [220.270689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.271075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.272490] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.274340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [220.274418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.279989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.304505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.314582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.315142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.315346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.315848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.316324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.317585] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [220.318304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [220.319380] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [220.319410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [220.319615] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [220.319815] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [220.320009] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [220.325796] EDID block 0 is all zeroes <7> [220.325800] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [220.325806] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325808] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325810] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325812] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325816] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325818] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.325829] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [220.325950] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [220.326671] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.326793] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [220.327348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.327486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.327618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.328150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.328328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.329160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [220.329194] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.330125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.331582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.355855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.360780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.361265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.361376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.362328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.362463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [220.363037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.363489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.363496] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.363633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [220.376542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.376547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [220.376665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.376814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.377643] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [220.377668] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.378602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.380029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.404390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.409869] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.410352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.410474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.425364] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [220.425372] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [220.426327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.426488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.426796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.427188] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [220.427202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.427404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.428241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [220.428269] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.429193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.430649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.455007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.460753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.461260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.461380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.461832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.462049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.462485] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [220.462879] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.463890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.466496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.490881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.499317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.499908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.500088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.501270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.501574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [220.502356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.502996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.503008] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.503338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [220.518896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.518910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [220.519243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.519701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.521093] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.522742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [220.522822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.528174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.552656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.559238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.559763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.559904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.560421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.560937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.562184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [220.562876] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [220.563944] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [220.563970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [220.564185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [220.564431] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [220.564629] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [220.570550] EDID block 0 is all zeroes <7> [220.570558] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [220.570568] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570575] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570580] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570583] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570587] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570590] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570593] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.570611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [220.570813] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [220.571747] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.571949] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [220.572694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.572926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.573174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.573835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.574089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.574992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [220.575030] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.576028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.581107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.605441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.609851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.610331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.610443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.611393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.611520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [220.612092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.612544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.612551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.612698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [220.625602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.625607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [220.625726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.625875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.626707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [220.626732] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.627672] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.629089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.653395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.657900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.658378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.658490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.673376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [220.673383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [220.674330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.674480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.675030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.675484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [220.675504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.675674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.676503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [220.676530] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.677453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.680097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.704398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.709477] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.709963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.710089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.710575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.710857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.711249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [220.711292] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.712248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.715100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.739447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.748026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.748713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.748930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.750103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.750490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [220.751458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [220.752218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.752240] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.752700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [220.769269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [220.769287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [220.769670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.770184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.771327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [220.771729] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.773926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [220.779667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.804158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.810227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.810715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.810830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.811293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [220.811757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [220.812949] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [220.813640] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [220.814602] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [220.814620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [220.814788] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [220.814952] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [220.815113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [220.820608] EDID block 0 is all zeroes <7> [220.820613] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [220.820621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820627] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820633] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820636] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820641] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.820653] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [220.820821] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [220.821662] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [220.821829] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [220.822495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [220.822689] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [220.822872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [220.823454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.823714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.824582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [220.824614] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.825625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [220.828384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.852692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.857685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.858176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.858297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.859249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.859392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [220.859945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [220.860404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.860409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [220.860552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [220.873446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [220.873451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [220.873571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.873720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.874549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [220.874574] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.875500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [220.878123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.902479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.907426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.907895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.908009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.923353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [220.923361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [220.924313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.924491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [220.924814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [220.925216] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [220.925231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.925432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.926312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [220.926344] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.927271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [220.930047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.954391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.960368] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [220.960900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [220.961057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [220.961583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [220.961872] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [220.962280] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [220.962328] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [220.963384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [220.966186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [220.990603] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [220.999403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.000083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.000424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.001827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.002254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [221.003105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.003775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.003796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.004284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [221.020939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.020956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [221.021371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.021969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.023492] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.025200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [221.025288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [221.030810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.055255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.061201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.061689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.061804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.062270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.062744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.063939] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [221.064601] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [221.065539] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [221.065559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [221.065727] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [221.065889] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [221.066050] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [221.071574] EDID block 0 is all zeroes <7> [221.071580] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [221.071588] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071592] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071601] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071603] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071606] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071609] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071612] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.071623] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [221.071789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [221.072576] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.072743] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [221.073390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.073581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.073764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.074358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.074568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.075436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [221.075466] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.076410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [221.079154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.103399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.107894] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.108372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.108484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.109440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.109568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [221.110151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.110593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.110598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.110712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [221.123592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.123598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [221.123718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.123867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.124725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [221.124750] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.125670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [221.128401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.152744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.158685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.159173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.159287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.174180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [221.174188] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [221.175121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.175264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.175858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.176318] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [221.176332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.176518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.177388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [221.177417] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.178339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [221.181055] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.205416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.210956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.211499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.211620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.212072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.212304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.212641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [221.213013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.214062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [221.216909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.241293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.250037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.250689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.250906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.252081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.252424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [221.253283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.253914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.253926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.254271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [221.269852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.269866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [221.270210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.270679] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.271661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [221.272071] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.273733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [221.279144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.303645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.311341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.311866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.312006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.312534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.312994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.314185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [221.314890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [221.315910] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [221.315929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [221.316153] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [221.316359] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [221.316557] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [221.322401] EDID block 0 is all zeroes <7> [221.322405] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [221.322412] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322415] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322417] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322419] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322423] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322427] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322429] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.322438] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [221.322559] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [221.323264] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.323384] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [221.323917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.324054] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.324197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.324751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.324903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.325745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [221.325771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.326722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [221.329427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.353698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.358694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.359188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.359295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.360244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.360371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [221.360944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.361405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.361410] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.361551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [221.374470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.374475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [221.374594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.374743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.375573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [221.375598] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.376524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [221.379125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.403446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.409367] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.409825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.409924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.424801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [221.424809] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [221.425769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.425925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.426256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.426681] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [221.426696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.426871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.427718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [221.427749] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.428690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [221.431470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.455840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.460754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.461321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.461506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.461991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.462269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.462952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [221.462989] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.463991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [221.466868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.491297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.501524] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.502298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.502568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.503855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.504280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [221.505172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.505921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.505936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.506358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [221.523045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.523062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [221.523478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.524050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.525527] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.527056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [221.527150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [221.532578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.557070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.562633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.563148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.563284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.563748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.564215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.565351] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [221.566005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [221.566975] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [221.566996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [221.567176] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [221.567379] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [221.567543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [221.573006] EDID block 0 is all zeroes <7> [221.573012] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [221.573020] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573024] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573029] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573032] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573035] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573038] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573041] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573043] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.573056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [221.573235] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [221.574105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.574291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [221.574976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.575182] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.575403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.575974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.576195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.577098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [221.577130] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.578126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [221.580888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.605180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.610107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.610575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.610658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.611258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.611402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [221.611952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.612413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.612418] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.612561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [221.625460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.625466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [221.625585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.625732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.626562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [221.626586] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.627514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [221.630124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.654478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.659887] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.660390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.660533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.675204] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [221.675212] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [221.676166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.676342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.676663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.677055] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [221.677069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.677256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.678145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [221.678173] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.679093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [221.681871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.706230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.712241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.712757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.712892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.713386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.713682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.714077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [221.714114] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.715112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [221.717986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.742394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.748343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.748960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.749200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.750443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.750765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [221.751484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.752056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.752067] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.752333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [221.766863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.766874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [221.767148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.767528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.768477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [221.768890] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.770456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [221.773146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.797599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.803342] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.803857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.803999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.804496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [221.804950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [221.806259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [221.806926] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [221.807875] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [221.807893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [221.808075] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [221.808271] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [221.808444] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [221.814046] EDID block 0 is all zeroes <7> [221.814051] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [221.814059] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814063] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814066] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814069] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814072] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814075] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814078] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814081] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.814094] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [221.814295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [221.815121] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [221.815318] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [221.815978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [221.816205] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [221.816404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [221.816988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.817221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.818087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [221.818120] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.819080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [221.821853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.846198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.850640] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.851109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.851217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.852159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.852288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [221.852848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [221.853307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.853312] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.853437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [221.866315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [221.866320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [221.866448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.866607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.867449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [221.867472] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.868400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [221.869805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.894166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.899136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.899593] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.899697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.914159] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [221.914167] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [221.915104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.915247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [221.915805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [221.916260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [221.916274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.916434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.917271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [221.917295] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.918221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [221.919653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.944006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.949407] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.949894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.950019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.950480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [221.950689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [221.951072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [221.951101] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [221.952032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [221.954858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [221.979224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [221.984360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [221.984929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [221.985109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [221.986276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.986556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [221.987023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [221.987583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [221.987594] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [221.987863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [222.001909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.001919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [222.002227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.002561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.003514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [222.003919] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.004956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [222.007897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.032353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.038408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.038906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.039031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.039522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.039995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.041178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [222.041845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [222.042835] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [222.042854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [222.043034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [222.043235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [222.043453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [222.049062] EDID block 0 is all zeroes <7> [222.049067] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [222.049075] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049079] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049082] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049085] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049088] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049091] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049094] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049097] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.049109] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [222.049314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [222.050164] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.050344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [222.051005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.051243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.051440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.052025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.052258] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.053133] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [222.053166] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.054114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [222.056890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.081226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.085756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.086238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.086336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.087279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.087399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [222.087948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.088406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.088411] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.088524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [222.101414] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.101419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [222.101537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.101687] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.102523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [222.102548] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.103471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [222.104807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.129162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.135152] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.135602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.135693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.150131] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [222.150139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [222.151082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.151238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.151811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.152272] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [222.152288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.152449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.153288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [222.153313] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.154238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [222.155667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.180028] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.185979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.186515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.186636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.187087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.187321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.187640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [222.188028] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.189072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [222.191926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.216319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.225035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.225684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.225901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.227074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.227414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [222.228270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.228896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.228908] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.229233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [222.244772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.244786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [222.245097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.245502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.246570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [222.246984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.248649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [222.254154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.278656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.286360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.286884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.287025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.287551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.288013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.289184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [222.289890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [222.290908] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [222.290927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [222.291147] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [222.291346] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [222.291544] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [222.297424] EDID block 0 is all zeroes <7> [222.297431] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [222.297441] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297448] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297452] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297456] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297459] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297462] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297466] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297469] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.297484] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [222.297686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [222.298590] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.298791] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [222.299501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.299730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.299952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.300585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.300838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.301731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [222.301768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.302736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [222.308096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.332471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.337859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.338349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.338434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.339360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.339492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [222.340077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.340529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.340536] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.340674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [222.353555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.353560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [222.353679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.353827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.354665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [222.354690] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.355617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [222.358335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.382587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.388355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.388868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.388959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.404260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [222.404267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [222.405222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.405385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.405946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.406408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [222.406422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.406622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.407463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [222.407491] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.408420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [222.411098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.435432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.440446] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.440952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.441090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.441594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.441850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.442242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [222.442285] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.443264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [222.446124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.470507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.479029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.479647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.479827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.480969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.481307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [222.482069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.482654] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.482670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.483029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [222.498095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.498108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [222.498450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.498914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.499896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [222.500324] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.501931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [222.507555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.531994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.539086] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.539604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.539744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.540229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.540717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.541933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [222.542608] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [222.543580] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [222.543598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [222.543772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [222.543940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [222.544106] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [222.549600] EDID block 0 is all zeroes <7> [222.549604] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [222.549610] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549612] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549614] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549616] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549618] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549620] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549622] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.549633] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [222.549752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [222.550468] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.550589] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [222.551139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.551309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.551441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.551959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.552109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.552944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [222.552969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.553942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [222.556481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.580756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.585778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.586262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.586375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.587321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.587448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [222.588024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.588476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.588482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.588621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [222.601528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.601533] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [222.601651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.601799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.602629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [222.602653] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.603585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [222.606331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.630680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.635687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.636172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.636312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.651117] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [222.651133] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [222.652076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.652232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.652582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.652973] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [222.652988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.653177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.654063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [222.654089] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.655051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [222.657827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.682186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.688263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.688770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.688910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.689392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.689661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.690040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [222.690073] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.691049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [222.693902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.718306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.727988] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.728622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.728832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.729965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.730241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [222.731067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.731672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.731689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.732046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [222.747141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.747154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [222.747458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.747841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.748827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [222.749251] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.750886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [222.756534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.780974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.785726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.786246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.786416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.786882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [222.787351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [222.788558] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [222.789183] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [222.790169] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [222.790194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [222.790396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [222.790565] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [222.790734] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [222.796222] EDID block 0 is all zeroes <7> [222.796227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [222.796235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.796268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [222.796441] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [222.797271] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [222.797482] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [222.798146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [222.798355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [222.798545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [222.799134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.799351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.800222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [222.800254] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.801211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [222.803934] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.828265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.832800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.833281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.833379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.834321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.834450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [222.835009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [222.835460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.835465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.835590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [222.848500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [222.848505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [222.848624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.848773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.849603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [222.849628] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.850560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [222.853323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.877667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.883171] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.883633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.883738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.898598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [222.898606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [222.899078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.899221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [222.899563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [222.899943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [222.899957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.900117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.900957] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [222.900982] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.901934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [222.904450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.928807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.934732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.935236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.935413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.935875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.936092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.936558] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [222.936922] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.937957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [222.940143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [222.964490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [222.973230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [222.973913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [222.974196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [222.975516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.976021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [222.976932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [222.977624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.977640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [222.978009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [222.994094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [222.994111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [222.994521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [222.995146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [222.996284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [222.996685] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [222.998875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [223.004578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.029058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.034114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.034608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.034723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.035185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [223.035649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [223.036849] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [223.037545] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [223.038499] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [223.038516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [223.038684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [223.038848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [223.039010] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [223.044572] EDID block 0 is all zeroes <7> [223.044578] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [223.044586] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044590] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044595] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044598] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044601] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044604] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044607] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044609] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.044621] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [223.044789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [223.045592] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.045759] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [223.046432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [223.046623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [223.046805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [223.047394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.047642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.048509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [223.048544] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.049521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [223.052143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.076459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.080865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.081347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.081459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.082407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.082536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [223.083110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.083563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.083569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.083708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [223.096618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.096623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [223.096741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.096891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.097723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [223.097747] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.098687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [223.101163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.125459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.130851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.131336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.131473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.146155] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [223.146163] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [223.146762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.146902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [223.147221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.147646] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [223.147661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.147836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.148720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [223.149135] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.150116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [223.152890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.177261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.183279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.183811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.183966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.184491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.184778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.185189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [223.185615] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.186690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [223.189449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.213854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.222044] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.222748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.222999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.224228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.224547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [223.225327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.225961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.225973] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.226289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [223.241423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.241436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [223.241741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.242145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.243191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [223.243599] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.245284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [223.248191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.272631] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.277649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.278171] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.278350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.278807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [223.279275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [223.280457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [223.281114] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [223.282090] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [223.282107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [223.282298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [223.282509] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [223.282678] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [223.288216] EDID block 0 is all zeroes <7> [223.288221] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [223.288229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.288262] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [223.288434] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [223.289267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.289478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [223.290143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [223.290378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [223.290568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [223.291156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.291411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.292283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [223.292321] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.293304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [223.296081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.320373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.324885] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.325362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.325475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.326423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.326551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [223.327134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.327576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.327581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.327696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [223.340567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.340573] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [223.340691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.340839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.341693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [223.341717] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.342628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [223.345367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.369709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.374721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.375197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.375338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.390102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [223.390110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [223.390730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.390872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [223.391194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.391615] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [223.391629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.391804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.392651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [223.392683] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.393623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [223.396396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.420757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.425765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.426314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.426509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.426996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.427256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.427955] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [223.427992] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.428996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [223.431864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.456295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.465061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.465828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.466176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.467634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.468067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [223.468980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.469667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.469682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.470050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [223.486574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.486591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [223.486972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.487482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.488634] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [223.489033] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.490751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [223.496108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.520558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.526542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.527041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.527192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.527690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [223.528158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [223.529339] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [223.529998] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [223.530982] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [223.531003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [223.531186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [223.531390] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [223.531553] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [223.537010] EDID block 0 is all zeroes <7> [223.537017] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [223.537025] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537030] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537035] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537037] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537040] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537043] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537046] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537048] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.537060] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [223.537243] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [223.538105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.538291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [223.538975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [223.539183] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [223.539404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [223.539976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.540195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.541072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [223.541104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.542098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [223.544863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.569098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.574052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.574580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.574677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.575288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.575428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [223.575978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.576439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.576444] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.576589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [223.589489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.589494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [223.589613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.589762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.590594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [223.590619] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.591549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [223.592979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.617336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.622350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.622818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.622933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.637821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [223.637828] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [223.638445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.638592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [223.638911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.639314] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [223.639329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.639536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.640398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [223.640428] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.641357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [223.644132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.668457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.674431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.674939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.675078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.675575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.675831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.676223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [223.676265] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.677271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [223.680121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.704518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.713115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.713734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.713916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.714999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.715273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [223.716043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.716622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.716634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.716927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [223.732028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.732041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [223.732382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.732779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.733760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [223.734186] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.735716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [223.740808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.765262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.771278] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.771775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.771895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.772367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [223.772851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [223.774060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [223.774733] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [223.775715] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [223.775733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [223.775907] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [223.776075] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [223.776260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [223.781809] EDID block 0 is all zeroes <7> [223.781815] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [223.781822] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781840] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.781855] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [223.782028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [223.782865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [223.783036] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [223.783699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [223.783896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [223.784085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [223.784691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.784907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.785777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [223.785816] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.786833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [223.789177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.813456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.817915] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.818393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.818505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.819460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.819588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [223.820171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [223.820613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.820618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.820734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [223.833636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [223.833641] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [223.833760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.833908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.834745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [223.834771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.835704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [223.838453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.862797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.868323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.868836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.868926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.883806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [223.883813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [223.884434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.884570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [223.885142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [223.885575] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [223.885593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.885774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.886611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [223.886638] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.887581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [223.890344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.914699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.920669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.921178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.921338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.921816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.922034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.922501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [223.922865] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.923905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [223.926494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [223.950887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [223.960839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [223.961662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [223.961932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [223.963240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.963653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [223.964521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [223.965297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.965319] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [223.965779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [223.982373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [223.982390] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [223.982776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [223.983348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [223.984498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [223.984895] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [223.986171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [223.991763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.016200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.022230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.022714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.022830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.023294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [224.023759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [224.024958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.025639] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [224.026614] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [224.026634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [224.026804] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [224.026968] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [224.027143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [224.032608] EDID block 0 is all zeroes <7> [224.032614] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [224.032622] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032626] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032631] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032635] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032637] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032640] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032643] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032646] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.032657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [224.032823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [224.033619] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.033784] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [224.034412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [224.034605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [224.034787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [224.035371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.035579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.036445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [224.036477] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.037438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [224.040152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.064476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.068847] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.069328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.069426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.070379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.070499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [224.071048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.071499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.071504] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.071618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [224.084525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.084530] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [224.084649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.084797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.085635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [224.085660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.086576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [224.089332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.113692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.118209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.118678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.118783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.133612] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [224.133620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [224.134559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.134690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [224.135269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.135696] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [224.135709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.135870] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.136706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [224.136731] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.137660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [224.140371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.164723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.169416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.169901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.170025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.170499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.170730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.171109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [224.171158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.172077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [224.174911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.199298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.209038] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.209707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.209924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.211099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.211509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [224.212397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.213034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.213048] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.213470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [224.229991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.230007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [224.230471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.230964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.232004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [224.232440] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.234086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [224.239774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.264270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.270223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.270713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.270829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.271294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [224.271759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [224.272943] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.273605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [224.274539] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [224.274559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [224.274729] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [224.274893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [224.275053] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [224.280605] EDID block 0 is all zeroes <7> [224.280610] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [224.280618] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280627] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280629] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280632] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280635] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.280649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [224.280816] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [224.281666] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.281833] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [224.282501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [224.282695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [224.282879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [224.283463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.283712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.284577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [224.284613] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.285610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [224.288388] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.312698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.318166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.318645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.318729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.319644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.319761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [224.320319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.320761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.320766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.320879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [224.333781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.333786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [224.333904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.334053] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.334890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [224.334915] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.335850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [224.338478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.362834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.367779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.368278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.368375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.383099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [224.383106] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [224.383725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.383856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [224.384431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.384870] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [224.384883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.385043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.385879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [224.385904] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.386851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [224.389484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.413844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.419741] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.420229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.420366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.420812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.421007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.421384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [224.421422] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.422389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [224.425174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [224.449553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.458136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.458728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.458909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.460019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.460302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [224.461209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.461849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.461861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.462185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [224.477303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.477308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [224.477430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.477579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [224.478421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [224.478454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled <7> [224.479363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [224.480843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [224.482575] [IGT] i915_pm_rpm: finished subtest module-reload, FAIL <6> [224.482884] [IGT] i915_pm_rpm: exiting, ret=98 <7> [224.505072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [224.510147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled <7> [224.510616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [224.510766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.510909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [224.511235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [224.511643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [224.511910] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10 <7> [224.512499] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.513097] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [224.513952] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [224.513965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [224.514085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [224.514216] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [224.514362] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [224.519383] EDID block 0 is all zeroes <7> [224.519387] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [224.519393] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519395] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519397] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519399] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519401] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519403] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519405] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519407] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.519416] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [224.519536] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [224.520252] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.520397] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [224.520938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [224.520964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [224.521326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.521443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [224.521762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.521892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.521896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.522009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [224.524369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [224.524612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [224.524764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [224.524906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [224.525448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.525453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [224.525608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.525907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1 <7> [224.525924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [224.526049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.540890] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [224.540897] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [224.541513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.541635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [224.542194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.542635] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [224.542647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.542787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1 <7> [224.542802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [224.542926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.543320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.543496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1 <7> [224.543511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [224.543635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.544547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.544687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [224.545246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.545687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.545692] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.545805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [224.558749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.558757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [224.558881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.559022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1 <7> [224.559037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [224.559174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.559591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [224.560054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [224.561162] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.561754] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [224.562585] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [224.562597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [224.562716] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [224.562833] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [224.562948] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [224.567948] EDID block 0 is all zeroes <7> [224.567951] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [224.567956] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567958] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567960] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567962] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567964] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567966] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567968] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567970] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.567978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [224.568097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [224.568824] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.568944] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [224.569490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [224.569627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [224.569758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [224.570290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [224.570441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1 <7> [224.704807] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [224.705223] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24) <7> [224.705531] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [224.705902] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36) <7> [224.706277] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz <7> [224.706616] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24 <7> [224.706919] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000 <7> [224.707246] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no <7> [224.707579] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0 <7> [224.707916] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A] <7> [224.708283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1) <7> [224.708648] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1) <7> [224.708983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [224.709351] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [224.709711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040) <7> [224.710045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [224.710407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920) <7> [224.710764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080) <7> [224.711096] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920) <7> [224.711470] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080) <7> [224.711826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968) <7> [224.712194] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000) <7> [224.712547] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200) <7> [224.712879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235) <7> [224.713271] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200) <7> [224.713633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235) <7> [224.713966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203) <7> [224.714327] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209) <7> [224.714686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920) <7> [224.715019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080) <7> [224.715385] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920) <7> [224.715666] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080) <7> [224.715930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968) <7> [224.716221] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000) <7> [224.716503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200) <7> [224.716766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235) <7> [224.717028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200) <7> [224.717560] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235) <7> [224.717831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203) <7> [224.718097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209) <7> [224.718387] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [224.718675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1) <7> [224.718939] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [224.719227] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [224.719509] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000) <7> [224.719772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000) <7> [224.720032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000) <7> [224.720336] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [224.720568] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B] <7> [224.720768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1) <7> [224.720987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1) <7> [224.721230] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [224.721465] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1) <7> [224.721682] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288) <7> [224.721902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080) <7> [224.722118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [224.722377] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640) <7> [224.722613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800) <7> [224.722832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640) <7> [224.723049] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800) <7> [224.723288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656) <7> [224.723522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752) <7> [224.723739] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480) <7> [224.723956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525) <7> [224.724196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480) <7> [224.724430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525) <7> [224.724646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490) <7> [224.724863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492) <7> [224.725079] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640) <7> [224.725324] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800) <7> [224.725539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640) <7> [224.725724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800) <7> [224.725908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656) <7> [224.726092] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752) <7> [224.726353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480) <7> [224.726543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525) <7> [224.726729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480) <7> [224.726915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525) <7> [224.727100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490) <7> [224.727303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492) <7> [224.727503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [224.727689] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [224.727874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [224.728058] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000005) <7> [224.728264] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24) <7> [224.728464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175) <7> [224.728649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175) <7> [224.728834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000) <7> [224.729018] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset <7> [224.729280] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3 <7> [224.729527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3 <7> [224.729766] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642 <7> [224.729959] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27 <7> [224.730165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [224.730369] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 <7> [224.730522] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 <7> [224.730673] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 <7> [224.730824] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208 <7> [224.730976] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15 <7> [224.731187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5,wm6,wm7, twm, swm, stwm <7> [224.731366] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 <7> [224.731519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 <7> [224.731671] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 <7> [224.731854] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz) <7> [224.732017] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz) <7> [224.732196] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz) <7> [224.732361] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz <7> [224.732523] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0 <7> [224.732729] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1 <7> [224.732913] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1 <7> [224.733107] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2 <7> [224.733285] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2 <7> [224.733456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset] <7> [224.733623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [224.733786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7> [224.733947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [224.734107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [224.734322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [224.734512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [224.734673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [224.734840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [224.735005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [224.735194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [224.735370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [224.735517] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [224.735699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9 <7> [224.735867] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9 <7> [224.736011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000 <7> [224.736168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0 <7> [224.736322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [224.736465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [224.736607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [224.736749] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4 <7> [224.736890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [224.737067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [224.737253] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [224.737426] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.737569] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.737711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.737867] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [224.738010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [224.738170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [224.738313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0 <7> [224.738467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no <7> [224.738651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no <7> [224.738803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset] <7> [224.738945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [224.739092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0 <7> [224.739254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid> <7> [224.739396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [224.739538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0 <7> [224.739680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0 <7> [224.739859] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64 <7> [224.740026] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [224.740195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0 <7> [224.740343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7> [224.740490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2 <7> [224.740618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [224.740747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [224.740875] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [224.741004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [224.741182] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa <7> [224.741326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175 <7> [224.741481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0 <7> [224.741610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [224.741737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [224.741880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0 <7> [224.742007] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0 <7> [224.742146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [224.742275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [224.742405] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [224.742565] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.742715] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.742843] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [224.742971] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [224.743105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [224.743248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [224.743376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0 <7> [224.743505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no <7> [224.743632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no <7> [224.744384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [224.744533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [224.744961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [224.745564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [224.745825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B] <7> [224.745951] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C] <7> [224.746081] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D] <7> [224.746216] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A] <7> [224.746338] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B] <7> [224.746459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C] <7> [224.746596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E] <7> [224.746749] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0 <7> [224.746943] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [224.747077] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [224.747232] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3 <7> [224.747365] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV <7> [224.747512] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A] <7> [224.747644] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1 <7> [224.748201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C <7> [224.748374] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A <7> [224.750036] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B] <7> [224.750180] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2 <7> [224.750410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E <7> [224.750565] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [224.751640] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.752668] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06 <7> [224.753234] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [224.753365] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000 <7> [224.753486] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1 <7> [224.754642] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK <7> [224.754768] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2 <7> [224.756509] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful <7> [224.756629] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1 <7> [224.757322] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B <7> [224.774383] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2] <7> [224.774557] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A] <7> [224.774913] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1 <7> [224.775115] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2] <7> [224.775297] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B] <7> [224.775548] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2 <7> [224.775848] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]] <7> [224.775872] [drm:drm_client_modeset_probe] <7> [224.776157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] <7> [224.776199] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1] <7> [224.776775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.776902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry <7> [224.777287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1) <7> [224.777420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.777425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.777537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1 <7> [224.780351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb <7> [224.780355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0 <7> [224.780611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected <7> [224.780626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] <7> [224.780639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2] <7> [224.793741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B <7> [224.793747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0 <7> [224.793973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.794095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [224.794399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1) <7> [224.794530] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [224.794763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes : <7> [224.794780] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 <7> [224.794785] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9 <7> [224.794789] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9 <7> [224.794792] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5 <7> [224.794796] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 <7> [224.794799] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9 <7> [224.794803] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5 <7> [224.794806] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9 <7> [224.794809] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [224.794813] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [224.794816] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [224.794819] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa <7> [224.794824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] <7> [224.794837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1] <7> [224.795023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected <7> [224.795036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] <7> [224.795048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3] <7> [224.795385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.795499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry <7> [224.795795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1) <7> [224.795925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.795929] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [224.796042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1 <7> [224.798857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd <7> [224.798861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0 <7> [224.798980] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected <7> [224.798993] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] <7> [224.799006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2] <7> [224.799913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00 <7> [224.800520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000 <7> [224.801360] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09 <7> [224.801372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes <7> [224.801495] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000 <7> [224.801611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000 <7> [224.801726] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000 <5> [224.807238] EDID block 0 is all zeroes <7> [224.807242] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid: <7> [224.807249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.807271] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no <7> [224.807390] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [224.808091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [224.808224] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [224.808851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes : <7> [224.808866] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa <7> [224.808870] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa <7> [224.808874] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 <7> [224.808878] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 <7> [224.808881] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 <7> [224.808885] [drm:drm_client_modeset_probe] connector 95 enabled? no <7> [224.808888] [drm:drm_client_modeset_probe] connector 104 enabled? yes <7> [224.808890] [drm:drm_client_modeset_probe] connector 108 enabled? no <7> [224.808892] [drm:drm_client_modeset_probe] connector 115 enabled? no <7> [224.808894] [drm:drm_client_modeset_probe] connector 119 enabled? yes <7> [224.808992] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [224.809006] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104 <7> [224.809010] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0 <7> [224.809012] [drm:drm_client_modeset_probe] found mode 1920x1200 <7> [224.809014] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119 <7> [224.809016] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0 <7> [224.809018] [drm:drm_client_modeset_probe] found mode 640x480 <7> [224.809021] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config <7> [224.809076] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0) <7> [224.809148] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)

<6> [205.713582] Console: switching to colour dummy device 80x25

<6> [205.713938] [IGT] i915_pm_rpm: executing

<7> [205.716747] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [205.717185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [205.717205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [205.717863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.717984] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [205.718312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.718446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.718451] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.718567] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [205.721703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.721708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [205.721948] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [205.722007] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [205.722019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [205.735167] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [205.735174] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [205.735487] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [205.735612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [205.735906] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [205.736037] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [205.736287] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [205.736303] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [205.736308] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [205.736312] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [205.736315] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [205.736318] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [205.736322] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [205.736325] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [205.736328] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [205.736331] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [205.736334] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [205.736337] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [205.736341] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [205.736402] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [205.736415] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [205.736611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [205.736671] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [205.736684] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [205.737015] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.737142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [205.737476] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.737608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.737615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.737728] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [205.740539] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.740544] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [205.740675] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [205.740739] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [205.740751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [205.741647] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [205.742234] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [205.743031] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [205.743042] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [205.743179] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [205.743323] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [205.743439] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [205.748817] EDID block 0 is all zeroes

<7> [205.748821] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [205.748826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748828] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748838] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.748846] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [205.748965] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [205.749667] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.749787] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [205.750416] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [205.750431] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [205.750435] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [205.750439] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [205.750442] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [205.750445] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [205.754023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [205.754039] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [205.754391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.754510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [205.754805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.754936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.754940] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.755052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [205.757861] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.757866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [205.757985] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [205.758651] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [205.758666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [205.758801] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [205.759234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [205.759254] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [205.759595] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.759713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [205.760016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.760174] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.760179] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.760340] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [205.763222] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.763227] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [205.763353] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [205.763883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [205.763896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [205.764230] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.764372] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [205.764675] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [205.764805] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.764809] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.764920] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [205.767726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [205.767730] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [205.767847] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [205.767874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [205.767886] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [205.780958] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [205.780964] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [205.781189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [205.781334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [205.781637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [205.781766] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [205.781978] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [205.781991] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [205.781995] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [205.781999] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [205.782002] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [205.782005] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [205.782008] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [205.782011] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [205.782014] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [205.782018] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [205.782021] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [205.782024] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [205.782027] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [205.782051] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [205.782063] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [205.782209] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [205.782234] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [205.782246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [205.782634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.782750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [205.783051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [205.783192] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.783195] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [205.783343] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [205.786151] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [205.786155] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [205.786273] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [205.786299] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [205.786311] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [205.787016] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [205.787605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [205.788421] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [205.788433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [205.788552] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [205.788669] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [205.788783] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [205.794198] EDID block 0 is all zeroes

<7> [205.794202] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [205.794206] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794208] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794210] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794213] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794215] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794217] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794218] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.794225] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [205.794344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [205.795028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [205.795161] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [205.795795] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [205.795808] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [205.795812] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [205.795816] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [205.795819] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [205.795822] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [205.796196] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:126]

<7> [206.828105] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [206.828631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [206.829420] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [206.830115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [206.830493] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [206.830636] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [206.830779] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [206.830922] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [206.831067] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [206.831216] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [206.831349] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [206.831476] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [206.831603] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [206.831729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0)

<7> [206.831856] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0)

<7> [206.831982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0)

<7> [206.832108] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0)

<7> [206.832254] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0)

<7> [206.832381] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0)

<7> [206.832508] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [206.832634] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [206.832761] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [206.832888] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [206.833015] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [206.833155] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [206.833284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0)

<7> [206.833411] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0)

<7> [206.833537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0)

<7> [206.833663] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0)

<7> [206.833790] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0)

<7> [206.833917] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0)

<7> [206.834043] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [206.834175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [206.834303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [206.834429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [206.834556] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0)

<7> [206.834682] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0)

<7> [206.834808] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0)

<7> [206.834933] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [206.835061] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1

<7> [206.835215] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [206.835345] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x1, ddb (669 - 892) -> (0 - 892), active pipes 0x3 -> 0x2

<7> [206.835498] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0

<7> [206.835618] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0

<7> [206.835736] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [206.835854] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.835972] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.836090] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.836216] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 860), size 208 -> 860

<7> [206.836334] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 860 - 892), size 15 -> 32

<7> [206.836469] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [206.836598] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [206.836726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [206.836855] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [206.836983] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [206.837110] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [206.837576] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [206.847152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [206.847420] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [206.847584] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1

<7> [206.847717] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [206.847840] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [206.847969] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [206.848090] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [206.848222] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [206.848343] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [206.848465] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [206.848586] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [206.848716] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [206.848848] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [206.848978] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [206.849107] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [206.854348] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [206.854680] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [206.854916] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [206.854979] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [206.855137] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0)

<7> [206.855276] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)

<7> [206.855415] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0)

<7> [206.855554] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0)

<7> [206.855693] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)

<7> [206.855831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [206.855969] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0)

<7> [206.856107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0)

<7> [206.856249] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0)

<7> [206.856376] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0)

<7> [206.856504] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0)

<7> [206.856630] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0)

<7> [206.856756] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0)

<7> [206.856883] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0)

<7> [206.857009] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0)

<7> [206.857150] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0)

<7> [206.857335] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0)

<7> [206.857523] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0)

<7> [206.857711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0)

<7> [206.857876] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0)

<7> [206.858005] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0)

<7> [206.858144] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0)

<7> [206.858274] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0)

<7> [206.858401] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0)

<7> [206.858528] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0)

<7> [206.858654] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0)

<7> [206.858780] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0)

<7> [206.858907] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0)

<7> [206.859033] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0)

<7> [206.859167] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0)

<7> [206.859295] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [206.859422] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [206.859549] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [206.859676] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [206.859802] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0)

<7> [206.859928] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0)

<7> [206.860054] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0)

<7> [206.860186] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [206.860314] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2

<7> [206.860458] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [206.860599] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0

<7> [206.860718] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0

<7> [206.860838] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [206.860958] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.861078] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.861203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [206.861337] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [206.861467] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [206.861595] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset]

<7> [206.861722] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no

<7> [206.861849] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [206.861975] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [206.862415] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B

<7> [206.872378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [206.872531] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B]

<7> [206.872679] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2

<7> [206.872822] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [206.872958] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [206.873092] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [206.873238] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [206.873371] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [206.873503] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [206.873635] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [206.873773] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [206.873913] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [206.874056] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [206.874206] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [206.874347] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [206.874506] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [206.874744] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [206.895378] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000

<7> [206.895522] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short

<7> [206.895779] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short

<7> [206.896719] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [206.897325] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [206.898118] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [207.063418] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [207.064047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [207.064398] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [207.064703] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [207.065398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.066815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [207.072151] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [207.076214] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [207.205812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [207.226902] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [207.229812] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [207.230529] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [207.232450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.233486] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [207.235069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [207.236434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [207.236657] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [207.237315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [207.237452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [207.237768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [207.237911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [207.237916] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.238040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [207.240875] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [207.240880] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [207.241010] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [207.241034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [207.250021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [207.250223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [207.250360] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [207.250502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [207.254660] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [207.254667] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [207.255627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [207.255753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [207.256318] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [207.256764] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [207.256777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.257099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [207.257117] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [207.257250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.257804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.257946] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [207.257962] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [207.258086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.259093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [207.259218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [207.259758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [207.260227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [207.260231] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [207.260344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [207.273234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [207.273238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [207.273355] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.273494] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [207.273509] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [207.273632] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.274036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [207.274481] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [207.275932] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [207.276535] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [207.277359] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [207.277371] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [207.277494] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [207.277611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [207.277725] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [207.282713] EDID block 0 is all zeroes

<7> [207.282716] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [207.282722] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282728] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282732] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282734] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282736] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.282744] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [207.282863] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [207.283564] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [207.283682] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [207.284219] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [207.284417] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [207.284549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [207.285066] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [207.285216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [207.427115] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [207.427296] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [207.427414] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [207.427561] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [207.427700] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz

<7> [207.427816] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24

<7> [207.427933] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000

<7> [207.428048] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no

<7> [207.428181] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [207.428370] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A]

<7> [207.428545] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [207.428733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [207.428922] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [207.429110] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [207.429284] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [207.429416] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [207.429546] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [207.429674] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [207.429803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [207.429930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [207.430091] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [207.430296] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [207.430485] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200)

<7> [207.430673] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235)

<7> [207.430863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200)

<7> [207.431003] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235)

<7> [207.431148] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203)

<7> [207.431277] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209)

<7> [207.431427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [207.431566] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [207.431709] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [207.431911] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [207.432115] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [207.432331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [207.432535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200)

<7> [207.432740] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235)

<7> [207.432895] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200)

<7> [207.433035] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235)

<7> [207.433270] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203)

<7> [207.433412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209)

<7> [207.433552] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [207.433696] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [207.433899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [207.434105] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [207.434325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000)

<7> [207.434530] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000)

<7> [207.434735] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000)

<7> [207.434887] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [207.435028] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B]

<7> [207.435174] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [207.435315] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1)

<7> [207.435455] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [207.435594] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1)

<7> [207.435771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288)

<7> [207.435976] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)

<7> [207.436192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [207.436398] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640)

<7> [207.436598] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800)

<7> [207.436747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640)

<7> [207.436888] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800)

<7> [207.437027] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656)

<7> [207.437368] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752)

<7> [207.437551] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480)

<7> [207.437755] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525)

<7> [207.437959] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480)

<7> [207.438175] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525)

<7> [207.438380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490)

<7> [207.438552] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492)

<7> [207.438698] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640)

<7> [207.438839] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800)

<7> [207.438978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640)

<7> [207.439117] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800)

<7> [207.439271] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656)

<7> [207.439421] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752)

<7> [207.439624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480)

<7> [207.439827] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525)

<7> [207.440031] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480)

<7> [207.440251] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525)

<7> [207.440429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490)

<7> [207.440570] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492)

<7> [207.440710] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [207.440850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [207.440989] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [207.441162] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [207.441366] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175)

<7> [207.441569] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175)

<7> [207.441773] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000)

<7> [207.441978] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [207.442210] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3

<7> [207.442350] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3

<7> [207.442501] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642

<7> [207.442633] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27

<7> [207.442765] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [207.442894] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0

<7> [207.443037] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0

<7> [207.443249] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0

<7> [207.443443] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208

<7> [207.443635] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15

<7> [207.443826] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [207.444002] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0

<7> [207.444158] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0

<7> [207.444289] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0

<7> [207.444439] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [207.444580] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz)

<7> [207.444729] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz)

<7> [207.444936] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [207.445156] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [207.445361] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1

<7> [207.445563] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1

<7> [207.445763] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2

<7> [207.445912] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2

<7> [207.446050] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [207.446204] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [207.446345] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [207.446483] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [207.446636] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [207.446837] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [207.447039] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [207.447287] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [207.447492] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [207.447643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [207.447783] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [207.447923] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [207.448061] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [207.448217] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [207.448376] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [207.448581] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000

<7> [207.448786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0

<7> [207.448989] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [207.449206] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [207.449403] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [207.449554] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4

<7> [207.449692] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [207.449832] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [207.449970] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [207.450108] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.450273] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.450475] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.450677] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [207.450880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [207.451084] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [207.451270] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [207.451411] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [207.451550] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [207.451688] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset]

<7> [207.451827] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [207.451966] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0

<7> [207.452170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [207.452373] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [207.452576] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [207.452778] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [207.452982] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64

<7> [207.453145] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [207.453285] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [207.453423] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [207.453562] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [207.453700] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [207.453877] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [207.454080] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [207.454296] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [207.454501] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [207.454708] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175

<7> [207.454884] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0

<7> [207.455026] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [207.455180] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [207.455320] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [207.455459] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0

<7> [207.455598] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [207.455795] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [207.455998] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [207.456214] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.456426] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.456595] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [207.456729] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [207.456858] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [207.456987] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [207.457115] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0

<7> [207.457262] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [207.457425] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [207.457905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [207.458108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [207.458578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [207.459187] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [207.459529] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [207.459712] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [207.459886] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [207.460016] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [207.460155] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [207.460282] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [207.460405] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [207.460527] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [207.460671] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [207.460866] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [207.461061] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [207.461268] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [207.461483] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [207.461632] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1

<7> [207.462177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [207.462355] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [207.463978] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B]

<7> [207.464111] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2

<7> [207.464387] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [207.464612] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [207.465809] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [207.466836] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06

<7> [207.467383] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [207.467563] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [207.467742] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1

<7> [207.468804] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK

<7> [207.468980] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2

<7> [207.470741] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful

<7> [207.470861] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1

<7> [207.471605] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B

<7> [207.488601] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [207.488760] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [207.489160] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [207.489441] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [207.489664] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [207.489968] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<6> [207.491654] [IGT] i915_pm_rpm: starting subtest module-reload

<7> [207.653433] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [207.659625] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [207.659778] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [207.659907] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [207.660036] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [207.660185] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [207.660371] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [207.660558] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [207.660742] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [207.660930] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [207.742382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [207.742694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [207.744328] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [207.744747] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [207.745187] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [207.745595] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [207.746088] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [207.746694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [207.747440] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [207.747931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [207.748451] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [207.748983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [207.749488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [207.749899] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [207.750345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0)

<7> [207.750683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0)

<7> [207.751018] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0)

<7> [207.751380] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0)

<7> [207.751764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0)

<7> [207.752189] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0)

<7> [207.752589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [207.753002] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [207.753367] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [207.753701] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [207.754034] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [207.754394] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [207.754783] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0)

<7> [207.755114] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0)

<7> [207.755581] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0)

<7> [207.755982] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0)

<7> [207.756533] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0)

<7> [207.757015] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0)

<7> [207.757535] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [207.758025] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [207.758544] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [207.759049] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [207.759488] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0)

<7> [207.759897] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0)

<7> [207.760433] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0)

<7> [207.760923] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [207.761441] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [207.761929] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 1, found 0)

<7> [207.762445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)

<7> [207.763007] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 1, found 0)

<7> [207.763388] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 3910800/8388608 link 81475/524288, found tu 0, data 0/0 link 0/0)

<7> [207.763805] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)

<7> [207.764242] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [207.764655] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 640, found 0)

<7> [207.765165] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 800, found 0)

<7> [207.765659] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 640, found 0)

<7> [207.766184] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 800, found 0)

<7> [207.766672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 656, found 0)

<7> [207.767188] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 752, found 0)

<7> [207.767589] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 480, found 0)

<7> [207.767997] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 525, found 0)

<7> [207.768445] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 480, found 0)

<7> [207.768912] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 525, found 0)

<7> [207.769489] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 490, found 0)

<7> [207.769978] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 492, found 0)

<7> [207.770502] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 640, found 0)

<7> [207.770995] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 800, found 0)

<7> [207.771429] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 640, found 0)

<7> [207.771705] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 800, found 0)

<7> [207.772026] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 656, found 0)

<7> [207.772364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 752, found 0)

<7> [207.772694] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 480, found 0)

<7> [207.773052] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 525, found 0)

<7> [207.773461] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 480, found 0)

<7> [207.773850] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 525, found 0)

<7> [207.774260] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 490, found 0)

<7> [207.774685] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 492, found 0)

<7> [207.775000] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [207.775345] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [207.775674] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [207.776040] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [207.776443] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 25175, found 0)

<7> [207.776764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 25175, found 0)

<7> [207.777083] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 162000, found 0)

<7> [207.777427] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [207.777706] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1

<7> [207.777934] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:72:pipe B] releasing DPLL 2

<7> [207.778253] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 669) -> (0 - 0), active pipes 0x3 -> 0x0

<7> [207.778509] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x1 -> 0x0, ddb (669 - 892) -> (0 - 0), active pipes 0x3 -> 0x0

<7> [207.778821] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 642) -> ( 0 - 0), size 642 -> 0

<7> [207.779120] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 642 - 669) -> ( 0 - 0), size 27 -> 0

<7> [207.779443] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [207.779743] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.780045] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.780390] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.780601] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 669 - 877) -> ( 0 - 0), size 208 -> 0

<7> [207.780846] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 877 - 892) -> ( 0 - 0), size 15 -> 0

<7> [207.781096] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [207.781366] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.781556] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.781792] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [207.782091] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [207.782411] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [207.782687] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [207.782960] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [207.783223] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [207.783417] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [207.783643] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [modeset]

<7> [207.783868] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [NOFB], visible: no

<7> [207.784052] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [207.784283] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [207.784877] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [207.797843] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [207.798020] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1

<7> [207.798244] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe B

<7> [207.806319] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 2 (active 0x2, on? 1) for [CRTC:72:pipe B]

<7> [207.806462] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 2

<7> [207.806596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [207.806721] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [207.806850] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [207.806972] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [207.807093] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [207.807235] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [207.807415] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [207.807604] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [207.807799] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [207.807993] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [207.808181] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [207.808315] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [207.808474] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [207.808670] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [207.809028] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [207.809286] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [207.833208] i915 0000:00:02.0: [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x02000000, dig 0x00000011, pins 0x00000100, long 0x00000000

<7> [207.833349] i915 0000:00:02.0: [drm:intel_hpd_irq_handler [i915]] digital hpd on [ENCODER:118:DDI E/PHY E] - short

<7> [207.833487] i915 0000:00:02.0: [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:118:DDI E/PHY E] - short

<7> [207.834154] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [207.834751] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [207.835554] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [207.839268] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [207.898170] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [208.305388] [IGT] Reloading i915 w/o display

<5> [208.459538] Setting dangerous option enable_guc - tainting kernel

<7> [208.492503] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [208.492729] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [208.492895] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [208.492905] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [208.493060] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [208.493322] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [208.493449] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [208.494016] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [208.494150] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [208.494275] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [208.494386] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [208.494390] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [208.495104] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [208.495120] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [208.495297] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [208.495761] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [208.495928] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [208.496072] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [208.496227] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [208.496380] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [208.502536] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [208.502702] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [208.502855] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [208.503007] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [208.503174] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [208.503298] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [208.503401] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [208.503501] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [208.503599] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [208.503696] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [208.503793] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [208.503889] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [208.503985] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [208.504081] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [208.504715] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [208.504886] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [208.505054] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [208.505238] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [208.505404] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [208.505559] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [208.505714] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [208.505868] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [208.506022] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [208.506188] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [208.506354] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [208.506508] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [208.506659] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [208.506809] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [208.506958] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [208.507111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [208.507277] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [208.507443] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [208.507596] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [208.507745] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [208.507896] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [208.508045] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [208.508205] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [208.508367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [208.508518] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [208.508667] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [208.508816] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [208.508965] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [208.509128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.509336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [208.509505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [208.509660] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [208.509816] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [208.509967] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [208.510118] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [208.510336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [208.510487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [208.510637] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [208.510795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [208.510979] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [208.511153] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [208.511313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [208.511464] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [208.511645] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [208.512727] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<6> [208.512726] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [208.512732] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<7> [208.513139] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [208.513326] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [208.513473] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [208.513617] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [208.513759] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [208.513899] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [208.514038] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [208.514188] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [208.514328] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [208.514468] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [208.515493] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [208.516928] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [208.517168] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present

<7> [208.517412] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [208.517632] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [208.517836] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [208.518301] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default)

<7> [208.518486] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [208.518626] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [208.518833] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT)

<7> [208.518985] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [208.519302] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [208.519452] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [208.519590] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [208.519797] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT)

<7> [208.519948] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [208.520162] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [208.520591] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [208.520763] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [208.520931] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [208.521082] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [208.521247] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [208.521399] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [208.521549] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [208.521698] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [208.521846] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [208.521993] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [208.522153] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [208.522303] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [208.522453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [208.522602] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [208.522750] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [208.522892] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [208.523034] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [208.523188] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [208.523337] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [208.523487] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [208.523642] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [208.523795] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [208.523947] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [208.524140] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [208.524298] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [208.524453] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [208.524607] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [208.524762] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [208.524905] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [208.525047] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [208.525199] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [208.525342] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [208.525495] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [208.525641] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [208.525785] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [208.525929] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [208.526081] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [208.526238] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [208.526383] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [208.526526] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [208.526714] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [208.526866] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [208.527016] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [208.527179] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [208.527331] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.527476] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.527618] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [208.529781] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [208.529927] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [208.530048] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [208.530193] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [208.530335] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [208.531378] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [208.531525] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [208.531664] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [208.534092] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [208.534289] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [208.534461] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [208.555158] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [208.555335] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [208.555481] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [208.555625] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [208.555769] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [208.555911] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [208.556054] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [208.556208] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [208.556351] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [208.556493] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [208.556635] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [208.556777] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [208.556919] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [208.557060] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [208.557214] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [208.558374] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [208.558378] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [208.564775] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 5ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [208.565479] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [208.565653] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [208.565655] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [208.574129] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [208.574382] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [208.574528] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [208.574670] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [208.574811] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [208.574969] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [208.575435] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [208.575555] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [208.575665] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [208.575771] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [208.578678] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [208.579213] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [208.579679] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [208.580744] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [208.581253] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [208.581706] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [208.582523] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [208.582593] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [208.584426] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [208.600548] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [208.601291] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input38

<7> [208.601984] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [208.602752] [drm:drm_client_modeset_probe]

<7> [208.602708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [208.602958] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [208.603106] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [208.603172] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [208.603191] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [208.603381] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [208.603413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [208.603652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [208.603667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [208.603679] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [208.603821] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to disconnected

<7> [208.603843] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [208.603862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [208.603880] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [208.604087] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [208.604111] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [208.604142] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [208.604140] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [208.604160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [208.604361] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [208.604365] i915 device info: graphics version: 9

<7> [208.604369] i915 device info: media version: 9

<7> [208.604372] i915 device info: display version: 9

<7> [208.604374] i915 device info: graphics stepping: G0

<7> [208.604368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [208.604377] i915 device info: media stepping: G0

<7> [208.604380] i915 device info: display stepping: G0

<7> [208.604382] i915 device info: base die stepping: **

<7> [208.604389] i915 device info: memory-regions: 0x21

<7> [208.604392] i915 device info: page-sizes: 0x11000

<7> [208.604394] i915 device info: platform: SKYLAKE

<7> [208.604397] i915 device info: ppgtt-size: 48

<7> [208.604399] i915 device info: ppgtt-type: 2

<7> [208.604395] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [208.604402] i915 device info: dma_mask_size: 39

<7> [208.604405] i915 device info: is_mobile: no

<7> [208.604407] i915 device info: is_lp: no

<7> [208.604411] i915 device info: require_force_probe: no

<7> [208.604413] i915 device info: is_dgfx: no

<7> [208.604416] i915 device info: has_64bit_reloc: yes

<7> [208.604411] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [208.604419] i915 device info: has_64k_pages: no

<7> [208.604421] i915 device info: gpu_reset_clobbers_display: no

<7> [208.604426] i915 device info: has_reset_engine: yes

<7> [208.604429] i915 device info: has_3d_pipeline: yes

<7> [208.604432] i915 device info: has_4tile: no

<7> [208.604435] i915 device info: has_flat_ccs: no

<7> [208.604438] i915 device info: has_global_mocs: no

<7> [208.604440] i915 device info: has_gmd_id: no

<7> [208.604443] i915 device info: has_gt_uc: yes

<7> [208.604446] i915 device info: has_heci_pxp: no

<7> [208.604449] i915 device info: has_heci_gscfi: no

<7> [208.604451] i915 device info: has_guc_deprivilege: no

<7> [208.604454] i915 device info: has_l3_ccs_read: no

<7> [208.604457] i915 device info: has_l3_dpf: no

<7> [208.604460] i915 device info: has_llc: yes

<7> [208.604462] i915 device info: has_logical_ring_contexts: yes

<7> [208.604465] i915 device info: has_logical_ring_elsq: no

<7> [208.604467] i915 device info: has_media_ratio_mode: no

<7> [208.604470] i915 device info: has_mslice_steering: no

<7> [208.604472] i915 device info: has_oa_bpc_reporting: no

<7> [208.604475] i915 device info: has_oa_slice_contrib_limits: no

<7> [208.604478] i915 device info: has_oam: no

<7> [208.604481] i915 device info: has_one_eu_per_fuse_bit: no

<7> [208.604484] i915 device info: has_pxp: no

<7> [208.604487] i915 device info: has_rc6: yes

<7> [208.604489] i915 device info: has_rc6p: no

<7> [208.604492] i915 device info: has_rps: yes

<7> [208.604495] i915 device info: has_runtime_pm: yes

<7> [208.604498] i915 device info: has_snoop: no

<7> [208.604500] i915 device info: has_coherent_ggtt: yes

<7> [208.604503] i915 device info: tuning_thread_rr_after_dep: no

<7> [208.604506] i915 device info: unfenced_needs_alignment: no

<7> [208.604509] i915 device info: hws_needs_physical: no

<7> [208.604511] i915 device info: has_pooled_eu: no

<7> [208.604514] i915 device info: cursor_needs_physical: no

<7> [208.604516] i915 device info: has_cdclk_crawl: no

<7> [208.604519] i915 device info: has_cdclk_squash: no

<7> [208.604521] i915 device info: has_ddi: yes

<7> [208.604524] i915 device info: has_dp_mst: yes

<7> [208.604526] i915 device info: has_dsb: no

<7> [208.604529] i915 device info: has_fpga_dbg: yes

<7> [208.604430] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [208.604532] i915 device info: has_gmch: no

<7> [208.604534] i915 device info: has_hotplug: yes

<7> [208.604537] i915 device info: has_hti: no

<7> [208.604539] i915 device info: has_ipc: yes

<7> [208.604541] i915 device info: has_overlay: no

<7> [208.604543] i915 device info: has_psr: yes

<7> [208.604545] i915 device info: has_psr_hw_tracking: yes

<7> [208.604548] i915 device info: overlay_needs_physical: no

<7> [208.604550] i915 device info: supports_tv: no

<7> [208.604552] i915 device info: has_hdcp: yes

<7> [208.604554] i915 device info: has_dmc: yes

<7> [208.604557] i915 device info: has_dsc: no

<7> [208.604559] i915 device info: rawclk rate: 24000 kHz

<7> [208.604562] i915 device info: iommu: enabled

<7> [208.604565] i915 device info: available engines: 40403

<7> [208.604567] i915 device info: slice total: 1, mask=0001

<7> [208.604570] i915 device info: subslice total: 3

<7> [208.604573] i915 device info: slice0: 3 subslices, mask=00000007

<7> [208.604575] i915 device info: slice1: 0 subslices, mask=00000000

<7> [208.604578] i915 device info: slice2: 0 subslices, mask=00000000

<7> [208.604581] i915 device info: EU total: 24

<7> [208.604583] i915 device info: EU per subslice: 8

<7> [208.604585] i915 device info: has slice power gating: no

<7> [208.604588] i915 device info: has subslice power gating: no

<7> [208.604590] i915 device info: has EU power gating: yes

<6> [208.604593] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [208.604595] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [208.604598] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [208.604652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to disconnected

<7> [208.604678] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [208.604695] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [208.604705] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [208.604709] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [208.604713] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [208.604717] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [208.604721] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [208.604838] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [208.604857] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [208.604891] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [208.604920] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<7> [208.606783] [drm:drm_client_modeset_probe]

<7> [208.607088] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [208.607152] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [208.607323] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [208.607341] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [208.607357] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [208.607476] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] disconnected

<7> [208.607490] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [208.607501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [208.607619] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [208.607631] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [208.607642] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [208.607757] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [208.607769] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [208.607780] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [208.607896] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] disconnected

<7> [208.607908] [drm:drm_client_modeset_probe] No connectors reported connected with modes

<7> [208.607915] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [208.607918] [drm:drm_client_modeset_probe] connector 104 enabled? no

<7> [208.607920] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [208.607922] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [208.607924] [drm:drm_client_modeset_probe] connector 119 enabled? no

<7> [208.608022] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [208.608035] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [208.608056] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<6> [208.608076] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes

<6> [208.612716] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [208.612966] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [208.613053] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<6> [208.635581] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000

<6> [208.636423] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line

<6> [208.636429] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [208.636433] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

<6> [208.636437] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [208.636440] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0

<6> [208.636443] snd_hda_codec_realtek hdaudioC0D0: inputs:

<6> [208.636446] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19

<6> [208.636450] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18

<6> [208.636453] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a

<7> [208.663149] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [208.663316] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [208.663447] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [208.663575] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [208.663703] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [208.663830] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [208.663957] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [208.664083] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [208.664232] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<6> [208.674325] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input39

<6> [208.675690] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input40

<6> [208.676901] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input41

<6> [208.677687] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input42

<6> [208.678717] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input43

<6> [208.680128] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input44

<6> [208.681358] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input45

<6> [208.682325] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input46

<6> [208.687469] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input47

<6> [208.693007] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input48

<7> [209.734431] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [209.735824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [209.736545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.737220] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.738291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [209.739537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [209.742413] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [209.746242] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [209.813786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [209.823021] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [209.824475] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [209.824861] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [209.824919] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [209.825317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [209.825363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [209.825454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [209.825738] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [209.825785] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [209.826054] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [209.826027] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [209.826084] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [209.826378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [209.826392] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [209.827100] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [209.827735] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [209.828222] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [209.841839] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [209.842323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [209.842702] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [209.843070] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [209.843887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.171470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.171660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [210.172113] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.172613] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [210.172926] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [210.179981] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [210.180171] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [210.180325] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [210.180476] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [210.180626] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [210.180776] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [210.180925] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [210.181075] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [210.181281] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [210.181866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [210.182329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [210.182537] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [210.182698] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [210.183265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [210.268861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.269614] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [210.270535] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [210.271638] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [210.272706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [210.273371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [210.274163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [210.274910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [210.310673] intel_gt_set_wedged called from intel_gt_set_wedged_on_fini+0xd/0x30 [i915]

<7> [210.383462] i915 0000:00:02.0: [drm:drm_client_release] drm_fb_helper

<6> [210.784393] [IGT] Reloading i915 as normal

<5> [210.916380] Setting dangerous option enable_guc - tainting kernel

<7> [210.949618] i915 0000:00:02.0: [drm:intel_gt_common_init_early [i915]] WOPCM: 1024K

<7> [210.949838] i915 0000:00:02.0: [drm:intel_uc_init_early [i915]] GT0: enable_guc=3 (guc:yes submission:no huc:yes slpc:no)

<6> [210.950004] i915 0000:00:02.0: [drm] GT0: Incompatible option enable_guc=3 - GuC submission is N/A

<7> [210.950014] i915 0000:00:02.0: [drm:intel_pch_type [i915]] Found SunrisePoint PCH

<7> [210.950199] i915 0000:00:02.0: [drm:intel_gt_probe_all [i915]] GT0: Setting up Primary GT

<7> [210.950527] i915 0000:00:02.0: [drm:intel_uncore_init_mmio [i915]] unclaimed mmio detected on uncore init, clearing

<7> [210.950754] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] rawclk rate: 24000 kHz

<7> [210.951606] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M

<7> [210.951786] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M

<7> [210.951959] i915 0000:00:02.0: [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M

<6> [210.952170] i915 0000:00:02.0: [drm] VT-d active for gfx access

<6> [210.952177] i915 0000:00:02.0: vgaarb: deactivate vga console

<6> [210.953243] i915 0000:00:02.0: [drm] Using Transparent Hugepages

<7> [210.953268] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = c7f00047

<7> [210.953501] i915 0000:00:02.0: [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K

<7> [210.953982] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0xc2a48018

<7> [210.954283] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0

<7> [210.954494] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Public ACPI methods supported

<7> [210.954701] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI Mailbox #2 present for opregion v2.x

<7> [210.954942] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI supported

<7> [210.959095] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483

<7> [210.959321] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE supported

<7> [210.959529] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] ASLE extension supported

<7> [210.959737] i915 0000:00:02.0: [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)

<7> [210.959945] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] DRAM type: DDR4

<7> [210.960110] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [210.960286] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH0 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [210.960445] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH0 ranks: 1, 16Gb DIMMs: no

<7> [210.960603] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM L size: 32 Gb, width: X8, ranks: 1, 16Gb DIMMs: no

<7> [210.960790] i915 0000:00:02.0: [drm:skl_dram_get_dimm_info [i915]] CH1 DIMM S size: 0 Gb, width: X0, ranks: 0, 16Gb DIMMs: no

<7> [210.960916] i915 0000:00:02.0: [drm:skl_dram_get_channel_info [i915]] CH1 ranks: 1, 16Gb DIMMs: no

<7> [210.961051] i915 0000:00:02.0: [drm:skl_get_dram_info [i915]] Memory configuration is symmetric? yes

<7> [210.961280] i915 0000:00:02.0: [drm:intel_dram_detect [i915]] DRAM channels: 2

<7> [210.961440] i915 0000:00:02.0: [drm:i915_driver_probe [i915]] Watermark level 0 adjustment needed: no

<7> [210.962068] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz

<7> [210.962332] i915 0000:00:02.0: [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 206

<7> [210.962599] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 1 (size 5, min size 7)

<7> [210.962865] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 2 (size 309, min size 5)

<7> [210.963149] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 9 (size 96, min size 100)

<7> [210.963377] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 12 (size 19, min size 19)

<7> [210.963602] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 27 (size 748, min size 812)

<7> [210.963854] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 40 (size 26, min size 34)

<7> [210.964115] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 41 (size 148, min size 148)

<7> [210.964390] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 42 (size 1282, min size 1366)

<7> [210.964662] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 43 (size 129, min size 305)

<7> [210.964888] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found BDB block 44 (size 21, min size 78)

<7> [210.965109] i915 0000:00:02.0: [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0

<7> [210.965369] i915 0000:00:02.0: [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2

<7> [210.965591] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [210.965861] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d2

<7> [210.966126] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x60d6

<7> [210.966405] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Found VBT child device with type 0x68c6

<7> [210.966631] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Skipping SDVO device mapping

<7> [210.966852] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [210.967098] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port B VBT HDMI level shift: 4

<7> [210.967367] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [210.967627] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port C VBT HDMI level shift: 8

<7> [210.967875] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [210.968111] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port D VBT HDMI level shift: 8

<7> [210.968341] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [210.968560] i915 0000:00:02.0: [drm:intel_bios_init [i915]] Port E VBT HDMI level shift: 0

<7> [210.968805] i915 0000:00:02.0: [drm:intel_power_domains_init [i915]] Allowed DC state mask 02

<7> [210.969072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.969394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_1

<7> [210.969690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling MISC_IO

<7> [210.969919] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [210.970152] i915 0000:00:02.0: [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz

<7> [210.970401] i915 0000:00:02.0: [drm:intel_cdclk_init_hw [i915]] Max dotclock rate: 675000 kHz

<7> [210.970658] i915 0000:00:02.0: [drm:gen9_dbuf_slices_update [i915]] Updating dbuf slices to 0x1

<7> [210.970977] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [210.971238] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [210.971475] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 00

<7> [210.971710] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [210.971976] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [210.972266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_B

<7> [210.972537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [210.972799] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_D

<7> [210.973111] i915 0000:00:02.0: [drm:intel_dmc_init [i915]] Loading i915/skl_dmc_ver1_27.bin

<6> [210.974366] i915 0000:00:02.0: [drm] Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled

<7> [210.974369] i915 0000:00:02.0: [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0

<6> [210.974522] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)

<7> [210.974749] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [210.974930] i915 0000:00:02.0: [drm:skl_wm_init [i915]] SAGV supported: yes, original SAGV block time: 30 us

<7> [210.975076] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)

<7> [210.975264] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)

<7> [210.975433] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)

<7> [210.975575] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)

<7> [210.975715] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)

<7> [210.975855] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)

<7> [210.975995] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)

<7> [210.976142] i915 0000:00:02.0: [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)

<7> [210.977634] i915 0000:00:02.0: [drm:intel_display_driver_probe_nogem [i915]] 3 display pipes available.

<7> [210.979043] i915 0000:00:02.0: [drm:intel_cdclk_dump_config [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0

<7> [210.979280] i915 0000:00:02.0: [drm:intel_setup_outputs [i915]] VBT says port A is not present

<7> [210.979506] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:94:DDI B/PHY B] using AUX B (platform default)

<7> [210.979659] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:94:DDI B/PHY B]

<7> [210.979798] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:94:DDI B/PHY B] Using DDC pin 0x5 (VBT)

<7> [210.980080] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:103:DDI C/PHY C] using AUX C (platform default)

<7> [210.980246] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:103:DDI C/PHY C]

<7> [210.980384] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:103:DDI C/PHY C] Using DDC pin 0x4 (VBT)

<7> [210.980586] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:107:DDI D/PHY D] using AUX D (VBT)

<7> [210.980735] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:107:DDI D/PHY D]

<7> [210.981036] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [210.981195] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:107:DDI D/PHY D]

<7> [210.981333] i915 0000:00:02.0: [drm:intel_hdmi_init_connector [i915]] [ENCODER:107:DDI D/PHY D] Using DDC pin 0x6 (VBT)

<7> [210.981537] i915 0000:00:02.0: [drm:intel_dp_aux_ch [i915]] [ENCODER:118:DDI E/PHY E] using AUX A (VBT)

<7> [210.981686] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:118:DDI E/PHY E]

<7> [210.981885] i915 0000:00:02.0: [drm:intel_dp_init_connector [i915]] PSR condition failed: Port not supported

<7> [210.982318] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled

<7> [210.982490] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:72:pipe B] hw state readout: disabled

<7> [210.982656] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:93:pipe C] hw state readout: disabled

<7> [210.982807] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] hw state readout: disabled, pipe A

<7> [210.982958] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] hw state readout: disabled, pipe A

<7> [210.983108] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] hw state readout: disabled, pipe A

<7> [210.983268] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] hw state readout: disabled, pipe B

<7> [210.983417] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] hw state readout: disabled, pipe B

<7> [210.983568] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] hw state readout: disabled, pipe B

<7> [210.983716] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] hw state readout: disabled, pipe C

<7> [210.983863] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] hw state readout: disabled, pipe C

<7> [210.984011] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] hw state readout: disabled, pipe C

<7> [210.984172] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DDI B/PHY B] hw state readout: disabled, pipe A

<7> [210.984321] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C/PHY C] hw state readout: disabled, pipe A

<7> [210.984469] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DDI D/PHY D] hw state readout: disabled, pipe A

<7> [210.984612] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:109:DP-MST A] hw state readout: disabled, pipe A

<7> [210.984753] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:110:DP-MST B] hw state readout: disabled, pipe B

<7> [210.984894] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:111:DP-MST C] hw state readout: disabled, pipe C

<7> [210.985041] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:118:DDI E/PHY E] hw state readout: disabled, pipe A

<7> [210.985202] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 0 hw state readout: pipe_mask 0x0, on 1

<7> [210.985357] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [210.985510] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [210.985662] i915 0000:00:02.0: [drm:intel_dpll_readout_hw_state [i915]] DPLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [210.985844] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:95:HDMI-A-1] hw state readout: disabled

<7> [210.986000] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:HDMI-A-2] hw state readout: disabled

<7> [210.986166] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:108:DP-1] hw state readout: disabled

<7> [210.986320] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:115:HDMI-A-3] hw state readout: disabled

<7> [210.986475] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:119:DP-2] hw state readout: disabled

<7> [210.986618] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:31:plane 1A] min_cdclk 0 kHz

<7> [210.986760] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:39:plane 2A] min_cdclk 0 kHz

<7> [210.986902] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:47:cursor A] min_cdclk 0 kHz

<7> [210.987044] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe A data rate 0 num active planes 0

<7> [210.987208] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:52:plane 1B] min_cdclk 0 kHz

<7> [210.987354] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:60:plane 2B] min_cdclk 0 kHz

<7> [210.987497] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:68:cursor B] min_cdclk 0 kHz

<7> [210.987639] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe B data rate 0 num active planes 0

<7> [210.987791] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 1C] min_cdclk 0 kHz

<7> [210.987937] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:81:plane 2C] min_cdclk 0 kHz

<7> [210.988080] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [PLANE:89:cursor C] min_cdclk 0 kHz

<7> [210.988233] i915 0000:00:02.0: [drm:intel_bw_crtc_update [i915]] pipe C data rate 0 num active planes 0

<7> [210.988422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [setup_hw_state]

<7> [210.988575] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: no [setup_hw_state]

<7> [210.988726] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:93:pipe C] enable: no [setup_hw_state]

<7> [210.988875] i915 0000:00:02.0: [drm:intel_dpll_sanitize_state [i915]] DPLL 0 enabled but not in use, disabling

<7> [210.989025] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:51:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [210.989204] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:72:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [210.989355] i915 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [i915]] [CRTC:93:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [210.991393] i915 0000:00:02.0: [drm:intel_wopcm_init [i915]] GuC WOPCM is already locked [160K, 864K)

<7> [210.991537] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] Reserved GGTT:[0, 2000] for use by error capture

<7> [210.991657] i915 0000:00:02.0: [drm:i915_init_ggtt [i915]] clearing unused GTT space: [2000, fee00000]

<7> [210.991789] i915 0000:00:02.0: [drm:gen9_gt_workarounds_init.isra.0 [i915]] MCR slice:0/subslice:0 = 0

<7> [210.991930] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 6 GT workarounds on global

<7> [210.993057] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 8 engine workarounds on rcs'0

<7> [210.993252] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 5 whitelist workarounds on rcs'0

<7> [210.993392] i915 0000:00:02.0: [drm:wa_init_finish [i915]] Initialized 12 context workarounds on rcs'0

<7> [210.995611] i915 0000:00:02.0: [drm:intel_guc_log_create [i915]] GT0: GUC: guc_log_level=5 (enabled, verbose:yes, verbosity:3)

<7> [210.995795] i915 0000:00:02.0: [drm:intel_guc_capture_init [i915]] GT0: GUC: capture found 6 ext-regs.

<7> [210.995964] i915 0000:00:02.0: [drm:intel_guc_ads_create [i915]] GT0: GUC: Used 4 KB for temporary ADS regset

<7> [211.016761] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 0] = 0xd804f

<7> [211.016938] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 1] = 0x0

<7> [211.017084] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 2] = 0x4000

<7> [211.017237] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 3] = 0x3

<7> [211.017382] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 4] = 0x9b2

<7> [211.017526] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 5] = 0x19120006

<7> [211.017668] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 6] = 0x0

<7> [211.017810] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 7] = 0x0

<7> [211.017951] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 8] = 0x0

<7> [211.018093] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[ 9] = 0x0

<7> [211.018243] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[10] = 0x0

<7> [211.018385] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[11] = 0x0

<7> [211.018527] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[12] = 0x0

<7> [211.018669] i915 0000:00:02.0: [drm:intel_guc_init [i915]] GT0: GUC: param[13] = 0x0

<7> [211.018812] i915 0000:00:02.0: [drm:intel_huc_init [i915]] GT0: HuC: loaded by GSC = no

<6> [211.019959] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/skl_guc_70.1.1.bin version 70.1.1

<6> [211.019963] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/skl_huc_2.0.0.bin version 2.0.0

<7> [211.024143] i915 0000:00:02.0: [drm:intel_guc_fw_upload [i915]] GT0: GUC: init took 2ms, freq = 350MHz, before = 350MHz, status = 0x8002F0EC, count = 0, ret = 0

<7> [211.024824] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<6> [211.024994] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled

<6> [211.024996] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled

<7> [211.032295] i915 0000:00:02.0: [drm:intel_sagv_post_plane_update [i915]] Enabling SAGV

<7> [211.032543] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:51:pipe A] not active, skipping

<7> [211.032688] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:72:pipe B] not active, skipping

<7> [211.032830] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] [CRTC:93:pipe C] not active, skipping

<7> [211.032968] i915 0000:00:02.0: [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config

<7> [211.033126] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [211.033583] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed rcs'0 to rcs0

<7> [211.033700] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed bcs'0 to bcs0

<7> [211.033809] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vcs'0 to vcs0

<7> [211.033914] i915 0000:00:02.0: [drm:engine_rename [i915]] renamed vecs'0 to vecs0

<7> [211.036404] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:95:HDMI-A-1] generating connector hotplug event

<7> [211.036722] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:104:HDMI-A-2] generating connector hotplug event

<7> [211.036986] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX D/DDI D/PHY D bus for card0-DP-1

<7> [211.037851] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:108:DP-1] generating connector hotplug event

<7> [211.038207] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:115:HDMI-A-3] generating connector hotplug event

<7> [211.038491] i915 0000:00:02.0: [drm:intel_dp_connector_register [i915]] registering AUX A/DDI E/PHY E bus for card0-DP-2

<7> [211.039093] i915 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:119:DP-2] generating connector hotplug event

<6> [211.039176] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0

<7> [211.040739] i915 0000:00:02.0: [drm:intel_opregion_resume [i915]] 5 outputs detected

<6> [211.057325] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [211.058041] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input49

<7> [211.058586] i915 0000:00:02.0: [drm:intel_audio_init [i915]] use AUD_FREQ_CNTRL of 0x10 (init value 0x10)

<7> [211.059093] [drm:drm_client_modeset_probe]

<7> [211.059039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_D

<7> [211.059291] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [211.059523] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [211.059507] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_B

<7> [211.059582] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [211.059737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_A_E

<7> [211.060418] [drm:intel_dsm_detect [i915]] no _DSM method for intel device

<7> [211.060665] i915 device info: pciid=0x1912 rev=0x06 platform=SKYLAKE (subplatform=0x0) gen=9

<7> [211.060669] i915 device info: graphics version: 9

<7> [211.060672] i915 device info: media version: 9

<7> [211.060674] i915 device info: display version: 9

<7> [211.060677] i915 device info: graphics stepping: G0

<7> [211.060679] i915 device info: media stepping: G0

<7> [211.060682] i915 device info: display stepping: G0

<7> [211.060684] i915 device info: base die stepping: **

<7> [211.060689] i915 device info: memory-regions: 0x21

<7> [211.060691] i915 device info: page-sizes: 0x11000

<7> [211.060694] i915 device info: platform: SKYLAKE

<7> [211.060696] i915 device info: ppgtt-size: 48

<7> [211.060699] i915 device info: ppgtt-type: 2

<7> [211.060701] i915 device info: dma_mask_size: 39

<7> [211.060703] i915 device info: is_mobile: no

<7> [211.060706] i915 device info: is_lp: no

<7> [211.060708] i915 device info: require_force_probe: no

<7> [211.060711] i915 device info: is_dgfx: no

<7> [211.060713] i915 device info: has_64bit_reloc: yes

<7> [211.060715] i915 device info: has_64k_pages: no

<7> [211.060717] i915 device info: gpu_reset_clobbers_display: no

<7> [211.060719] i915 device info: has_reset_engine: yes

<7> [211.060721] i915 device info: has_3d_pipeline: yes

<7> [211.060723] i915 device info: has_4tile: no

<7> [211.060725] i915 device info: has_flat_ccs: no

<7> [211.060727] i915 device info: has_global_mocs: no

<7> [211.060729] i915 device info: has_gmd_id: no

<7> [211.060732] i915 device info: has_gt_uc: yes

<7> [211.060734] i915 device info: has_heci_pxp: no

<7> [211.060737] i915 device info: has_heci_gscfi: no

<7> [211.060739] i915 device info: has_guc_deprivilege: no

<7> [211.060742] i915 device info: has_l3_ccs_read: no

<7> [211.060744] i915 device info: has_l3_dpf: no

<7> [211.060747] i915 device info: has_llc: yes

<7> [211.060749] i915 device info: has_logical_ring_contexts: yes

<7> [211.060752] i915 device info: has_logical_ring_elsq: no

<7> [211.060754] i915 device info: has_media_ratio_mode: no

<7> [211.060757] i915 device info: has_mslice_steering: no

<7> [211.060759] i915 device info: has_oa_bpc_reporting: no

<7> [211.060762] i915 device info: has_oa_slice_contrib_limits: no

<7> [211.060764] i915 device info: has_oam: no

<7> [211.060661] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.060767] i915 device info: has_one_eu_per_fuse_bit: no

<7> [211.060769] i915 device info: has_pxp: no

<7> [211.060771] i915 device info: has_rc6: yes

<7> [211.060773] i915 device info: has_rc6p: no

<7> [211.060775] i915 device info: has_rps: yes

<7> [211.060777] i915 device info: has_runtime_pm: yes

<7> [211.060779] i915 device info: has_snoop: no

<7> [211.060781] i915 device info: has_coherent_ggtt: yes

<7> [211.060783] i915 device info: tuning_thread_rr_after_dep: no

<7> [211.060785] i915 device info: unfenced_needs_alignment: no

<7> [211.060787] i915 device info: hws_needs_physical: no

<7> [211.060789] i915 device info: has_pooled_eu: no

<7> [211.060791] i915 device info: cursor_needs_physical: no

<7> [211.060793] i915 device info: has_cdclk_crawl: no

<7> [211.060795] i915 device info: has_cdclk_squash: no

<7> [211.060796] i915 device info: has_ddi: yes

<7> [211.060798] i915 device info: has_dp_mst: yes

<7> [211.060800] i915 device info: has_dsb: no

<7> [211.060802] i915 device info: has_fpga_dbg: yes

<7> [211.060804] i915 device info: has_gmch: no

<7> [211.060806] i915 device info: has_hotplug: yes

<7> [211.060808] i915 device info: has_hti: no

<7> [211.060810] i915 device info: has_ipc: yes

<7> [211.060812] i915 device info: has_overlay: no

<7> [211.060814] i915 device info: has_psr: yes

<7> [211.060816] i915 device info: has_psr_hw_tracking: yes

<7> [211.060817] i915 device info: overlay_needs_physical: no

<7> [211.060819] i915 device info: supports_tv: no

<7> [211.060821] i915 device info: has_hdcp: yes

<7> [211.060822] i915 device info: has_dmc: yes

<7> [211.060824] i915 device info: has_dsc: no

<7> [211.060826] i915 device info: rawclk rate: 24000 kHz

<7> [211.060827] i915 device info: iommu: enabled

<7> [211.060829] i915 device info: available engines: 40403

<7> [211.060831] i915 device info: slice total: 1, mask=0001

<7> [211.060834] i915 device info: subslice total: 3

<7> [211.060836] i915 device info: slice0: 3 subslices, mask=00000007

<7> [211.060839] i915 device info: slice1: 0 subslices, mask=00000000

<7> [211.060841] i915 device info: slice2: 0 subslices, mask=00000000

<7> [211.060844] i915 device info: EU total: 24

<7> [211.060846] i915 device info: EU per subslice: 8

<7> [211.060848] i915 device info: has slice power gating: no

<7> [211.060850] i915 device info: has subslice power gating: no

<7> [211.060852] i915 device info: has EU power gating: yes

<6> [211.060854] i915 0000:00:02.0: [drm] DRM_I915_DEBUG enabled

<6> [211.060857] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_GEM enabled

<6> [211.060859] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled

<7> [211.060908] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [211.061514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.061743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.061751] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.061955] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [211.065006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.065012] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [211.065223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [211.065587] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.065752] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.065908] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.066460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.067009] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] status updated from unknown to disconnected

<7> [211.067397] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [211.067422] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [211.067441] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [211.067716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.082794] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [211.082802] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [211.083690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.083937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.084600] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.085066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.085087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.085344] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] status updated from unknown to connected

<7> [211.085652] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [211.085681] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [211.085690] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [211.085696] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [211.085702] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [211.085707] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [211.085713] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [211.085719] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [211.085725] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [211.085731] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.085736] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.085741] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.085747] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [211.085755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [211.085775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [211.086004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.086616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.086859] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] status updated from unknown to disconnected

<7> [211.086891] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [211.086910] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [211.086929] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [211.087159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.087850] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.088059] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [211.088473] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.088935] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.088942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.089154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [211.102104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.102110] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [211.102296] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.102538] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] status updated from unknown to disconnected

<7> [211.102572] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [211.102591] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [211.102610] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [211.102830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.103433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.104024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.105776] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [211.106446] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [211.107307] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [211.107321] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [211.107487] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [211.107630] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [211.107771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [211.112877] EDID block 0 is all zeroes

<7> [211.112881] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [211.112888] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112890] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112892] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112894] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112896] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112898] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112901] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112903] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.112912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [211.113066] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [211.113814] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.113959] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [211.114548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.114711] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.114866] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.115419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.115582] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] status updated from unknown to connected

<7> [211.115689] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [211.115701] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [211.115707] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.115711] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.115715] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.115718] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [211.115722] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [211.115725] [drm:drm_client_modeset_probe] connector 104 enabled? yes

<7> [211.115727] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [211.115730] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [211.115732] [drm:drm_client_modeset_probe] connector 119 enabled? yes

<7> [211.115853] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [211.115871] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104

<7> [211.115875] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0

<7> [211.115877] [drm:drm_client_modeset_probe] found mode 1920x1200

<7> [211.115879] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119

<7> [211.115882] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0

<7> [211.115884] [drm:drm_client_modeset_probe] found mode 640x480

<7> [211.115886] [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [211.115924] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)

<7> [211.115993] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)

<7> [211.116018] i915 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane

<7> [211.116071] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one

<7> [211.119173] i915 0000:00:02.0: [drm:intelfb_create [i915]] allocated 1920x1200 fb: 0x00e80000

<6> [211.119816] fbcon: i915drmfb (fb0) is primary device

<6> [211.120196] Console: switching to colour frame buffer device 80x30

<6> [211.120209] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device

<7> [211.134352] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [211.134372] [drm:drm_client_modeset_probe]

<7> [211.134625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [211.134669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [211.134934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.136091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.136270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [211.136836] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.138203] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.138211] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.138352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [211.140298] i915 0000:00:02.0: [drm:i915_gem_open [i915]]

<7> [211.152630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.152637] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [211.152780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.152949] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [211.152967] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [211.152980] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [211.153107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.168308] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [211.168317] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [211.168563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.168699] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.169307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.169779] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.169794] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.170174] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [211.170196] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [211.170201] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [211.170205] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [211.170208] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [211.170212] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [211.170216] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [211.170219] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [211.170223] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [211.170226] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.170229] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.170233] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.170236] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [211.170241] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [211.170254] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [211.170384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.171017] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.171198] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [211.171220] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [211.171239] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [211.171369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.172280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.172406] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [211.172946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.173420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.173427] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.173554] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [211.186967] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.186973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [211.187108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.187272] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [211.187296] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [211.187316] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [211.187443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.187868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.188340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.189859] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [211.190464] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [211.191301] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [211.191314] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [211.191449] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [211.191567] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [211.191684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [211.196720] EDID block 0 is all zeroes

<7> [211.196724] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [211.196730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196733] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196735] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196737] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196739] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196741] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196743] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196745] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.196755] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [211.196887] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [211.197593] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.197715] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [211.198252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [211.198450] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [211.198582] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [211.199100] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.199368] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [211.199384] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [211.199390] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.199394] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.199398] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.199401] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [211.199405] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [211.199408] [drm:drm_client_modeset_probe] connector 104 enabled? yes

<7> [211.199410] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [211.199413] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [211.199415] [drm:drm_client_modeset_probe] connector 119 enabled? yes

<7> [211.199502] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [211.199520] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104

<7> [211.199523] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0

<7> [211.199526] [drm:drm_client_modeset_probe] found mode 1920x1200

<7> [211.199528] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119

<7> [211.199530] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0

<7> [211.199533] [drm:drm_client_modeset_probe] found mode 640x480

<7> [211.199535] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config

<7> [211.199588] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)

<7> [211.199607] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [211.199645] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)

<7> [211.199626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [211.199946] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.201179] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.201307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [211.201857] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.202324] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.202329] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.202443] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [211.215857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.215862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [211.215986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [211.216127] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [211.216352] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<6> [211.216289] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])

<7> [211.216375] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [211.216610] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [211.216759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [211.217238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [211.217717] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [211.217997] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [211.231051] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [211.231058] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [211.231302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.231430] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.231742] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.231874] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.232082] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [211.232096] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [211.232101] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [211.232104] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [211.232107] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [211.232110] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [211.232113] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [211.232117] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [211.232120] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [211.232135] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.232140] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.232145] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.232150] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [211.232248] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [211.232268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [211.232739] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [211.232837] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [211.232856] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [211.233218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.233373] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [211.233713] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.233858] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.233864] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.233996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [211.236971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.236977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [211.237112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [211.237203] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [211.237219] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [211.238276] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [211.238888] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<6> [211.239740] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000

<7> [211.239786] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [211.239806] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [211.239995] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [211.240187] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [211.240364] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<6> [211.241063] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line

<6> [211.241068] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

<6> [211.241072] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

<6> [211.241074] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0

<6> [211.241077] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0

<6> [211.241080] snd_hda_codec_realtek hdaudioC0D0: inputs:

<6> [211.241082] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19

<6> [211.241084] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18

<6> [211.241087] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a

<5> [211.245570] EDID block 0 is all zeroes

<7> [211.245574] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [211.245580] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245582] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245589] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245591] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245592] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245594] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245596] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.245605] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [211.245740] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [211.246466] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.246591] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [211.247307] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [211.247323] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [211.247328] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.247331] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.247335] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.247338] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [211.249930] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [211.249947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [211.250330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.250454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [211.250771] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.250907] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.250911] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.251029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [211.254076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.254081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [211.254223] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [211.254915] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [211.254929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [211.255077] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [211.255550] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [211.255564] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [211.255905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.256028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [211.256366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.256502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.256506] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.256624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [211.259738] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.259743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [211.259862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [211.260398] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [211.260413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [211.260755] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.260871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [211.261186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [211.261359] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.261363] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.261484] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [211.264405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [211.264413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [211.264592] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [211.264634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [211.264654] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [211.271588] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [211.271746] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [211.271884] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port B

<7> [211.272012] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [211.272155] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [211.272290] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port C

<7> [211.272418] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [211.272545] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [211.272689] i915 0000:00:02.0: [drm:i915_audio_component_get_eld [i915]] Not valid for port D

<7> [211.280852] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [211.280862] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [211.281116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.281326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [211.281707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [211.281900] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [211.282220] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [211.282241] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [211.282249] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [211.282255] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [211.282260] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [211.282265] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [211.282271] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [211.282275] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [211.282280] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [211.282284] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.282289] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.282294] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.282299] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [211.282339] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [211.282358] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [211.282564] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [211.282602] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [211.282620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [211.283010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<6> [211.283232] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input50

<7> [211.283217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [211.283575] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [211.283760] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.283766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [211.283933] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<6> [211.284698] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input51

<6> [211.285491] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input52

<7> [211.287211] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [211.287220] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [211.287403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<6> [211.287430] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input53

<7> [211.287451] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [211.287471] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<6> [211.288216] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input54

<7> [211.288304] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [211.288926] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<6> [211.289554] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input55

<7> [211.289964] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [211.289984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [211.290181] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [211.290353] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [211.290525] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [211.295790] EDID block 0 is all zeroes

<7> [211.295795] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [211.295803] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295807] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295810] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295817] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.295838] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [211.296026] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [211.296750] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [211.296901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<6> [211.297474] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input56

<7> [211.297746] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [211.297767] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [211.297775] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [211.297781] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [211.297786] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [211.297792] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [211.298383] i915 0000:00:02.0: [drm:drm_mode_addfb2] [FB:122]

<6> [211.305314] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input57

<6> [211.306102] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input58

<6> [211.317774] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input59

<7> [212.316823] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [212.317648] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [212.318262] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [212.524209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.525651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.526401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.527090] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.528252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.529802] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.532746] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [212.536251] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [212.624275] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [212.624398] [drm:drm_mode_setcrtc] [CONNECTOR:104:HDMI-A-2]

<7> [212.624675] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [212.625484] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [212.626109] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [212.626829] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A]

<7> [212.627482] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [212.628200] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [212.628878] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [212.629770] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [212.630606] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [212.631331] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [212.631966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [212.632631] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [212.633279] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [212.633903] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [212.634781] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [212.635529] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [212.636235] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200)

<7> [212.636861] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235)

<7> [212.637513] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200)

<7> [212.638166] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235)

<7> [212.638788] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203)

<7> [212.639619] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209)

<7> [212.640518] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [212.641192] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [212.641885] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [212.642539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [212.643195] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [212.643816] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [212.644595] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200)

<7> [212.645412] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235)

<7> [212.646094] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200)

<7> [212.646752] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235)

<7> [212.647427] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203)

<7> [212.648057] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209)

<7> [212.648733] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [212.649599] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [212.650374] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [212.651061] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021)

<7> [212.651724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80000181)

<7> [212.652406] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a4)

<7> [212.653032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [212.653683] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000)

<7> [212.654449] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000)

<7> [212.655364] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000)

<7> [212.655787] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [212.656321] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 892), active pipes 0x0 -> 0x1

<7> [212.656788] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 860), size 0 -> 860

<7> [212.657203] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 860 - 892), size 0 -> 32

<7> [212.657595] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [212.657981] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0

<7> [212.658523] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0

<7> [212.658997] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0

<7> [212.659496] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [212.659922] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (9625 kHz) > old min cdclk (0 kHz)

<7> [212.660369] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [212.660681] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [212.660994] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1

<7> [212.661319] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1

<7> [212.661633] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [212.662044] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [212.662440] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [212.662752] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [212.663092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [212.663422] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [212.663731] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [212.664038] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [212.664362] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [212.664753] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [212.665120] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [212.665438] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [212.665703] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [212.665954] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [212.666218] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [212.666467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000

<7> [212.666715] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0

<7> [212.666971] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [212.667336] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [212.667594] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [212.667844] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4

<7> [212.668113] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [212.668378] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [212.668626] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [212.668875] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.669139] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.669388] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [212.669669] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [212.669993] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:122] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [212.670278] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [212.670514] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [212.670745] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [212.670953] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [212.683255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [212.691270] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [212.692228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [212.693763] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [212.693943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.694400] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.694951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [212.695178] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [212.695330] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [212.695454] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [212.695576] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [212.695698] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [212.695819] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [212.695940] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [212.696061] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [212.696203] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [212.696378] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [212.696509] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [212.696681] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [212.696817] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1

<7> [212.697258] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [212.697445] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [212.714996] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [212.715195] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [212.715518] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [212.715750] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [212.716322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [212.716432] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [212.716488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [212.716807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [212.716948] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [212.716952] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.717066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [212.719923] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [212.719928] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [212.720198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [212.720239] [drm:drm_mode_setcrtc] [CONNECTOR:104:HDMI-A-2]

<7> [212.731698] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [212.745002] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [212.745008] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [212.745243] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [212.745394] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.745701] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [212.745841] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.745855] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [212.745872] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [212.746058] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [212.746073] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [212.746422] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [212.746539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [212.746835] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [212.746973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [212.746977] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.747094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [212.750052] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [212.750057] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [212.750189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [212.750210] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [212.751261] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [212.751872] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [212.752721] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [212.752733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [212.752856] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [212.752974] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [212.753091] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [212.758117] EDID block 0 is all zeroes

<7> [212.758121] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [212.758141] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758144] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758146] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758148] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758150] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758152] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758154] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758156] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.758165] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [212.758322] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [212.759030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.759160] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [212.759740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [212.759774] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [212.759789] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [212.760148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [212.760265] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [212.760576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [212.760707] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [212.760712] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.760824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [212.763629] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [212.763634] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [212.763750] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [212.763826] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [212.763839] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [212.776940] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [212.776945] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [212.777182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [212.777304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [212.777616] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [212.777748] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [212.777958] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [212.777972] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [212.777976] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [212.777980] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [212.777983] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [212.777986] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [212.777989] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [212.777992] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [212.777995] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [212.777998] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [212.778001] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [212.778004] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [212.778007] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [212.778068] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [212.778081] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [212.778224] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [212.778286] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [212.778298] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [212.778635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [212.778750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [212.779061] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [212.779202] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [212.779205] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [212.779318] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [212.782112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [212.782116] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [212.782240] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [212.782305] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [212.782317] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [212.783030] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [212.783614] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [212.784434] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [212.784447] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [212.784568] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [212.784685] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [212.784801] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [212.789713] EDID block 0 is all zeroes

<7> [212.789717] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [212.789722] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789724] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789726] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789728] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789730] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789732] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789735] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789738] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.789745] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [212.789864] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [212.790557] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [212.790679] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [212.791301] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [212.791315] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [212.791320] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [212.791324] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [212.791327] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [212.791330] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [212.791468] [drm:drm_mode_setcrtc] [CRTC:51:pipe A]

<7> [212.791537] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 1, found 0)

<7> [212.791672] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 1, found 0)

<7> [212.791803] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [212.791931] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [212.792059] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)

<7> [212.792198] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [212.792325] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)

<7> [212.792453] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2080, found 0)

<7> [212.792579] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)

<7> [212.792706] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2080, found 0)

<7> [212.792832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 1968, found 0)

<7> [212.792960] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2000, found 0)

<7> [212.793086] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1200, found 0)

<7> [212.793220] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1235, found 0)

<7> [212.793347] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1200, found 0)

<7> [212.793473] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1235, found 0)

<7> [212.793600] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1203, found 0)

<7> [212.793727] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1209, found 0)

<7> [212.793853] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)

<7> [212.793980] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2080, found 0)

<7> [212.794107] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)

<7> [212.794242] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2080, found 0)

<7> [212.794370] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 1968, found 0)

<7> [212.794497] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2000, found 0)

<7> [212.794624] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1200, found 0)

<7> [212.794751] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1235, found 0)

<7> [212.794877] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1200, found 0)

<7> [212.795004] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1235, found 0)

<7> [212.795137] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1203, found 0)

<7> [212.795263] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1209, found 0)

<7> [212.795390] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [212.795516] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)

<7> [212.795644] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [212.795771] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 0)

<7> [212.795898] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 154000, found 0)

<7> [212.796024] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 154000, found 0)

<7> [212.796161] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 154000, found 0)

<7> [212.796288] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [212.796415] i915 0000:00:02.0: [drm:intel_unreference_shared_dpll_crtc [i915]] [CRTC:51:pipe A] releasing DPLL 1

<7> [212.796559] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x1 -> 0x0, ddb (0 - 892) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [212.796699] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 860) -> ( 0 - 0), size 860 -> 0

<7> [212.796819] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 860 - 892) -> ( 0 - 0), size 32 -> 0

<7> [212.796937] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [212.797056] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.797182] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.797301] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.797437] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [212.797566] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [212.797696] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: no [modeset]

<7> [212.797824] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [NOFB], visible: no

<7> [212.797952] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [212.798080] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [212.798419] i915 0000:00:02.0: [drm:intel_disable_transcoder [i915]] disabling pipe A

<7> [212.815779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DDI_IO_C

<7> [212.815949] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disable DPLL 1 (active 0x1, on? 1) for [CRTC:51:pipe A]

<7> [212.816139] i915 0000:00:02.0: [drm:intel_disable_shared_dpll [i915]] disabling DPLL 1

<7> [212.816283] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [212.816419] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [212.816559] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [212.816692] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [212.816825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [212.816957] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [212.817089] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [212.817229] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [212.817372] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [212.817515] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [212.817657] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [212.817798] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [212.817957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [212.818141] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [212.818312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.818455] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.818595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.819199] [drm:drm_mode_setcrtc] [CRTC:72:pipe B]

<7> [212.819284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.819666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.820173] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.820316] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.820457] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.821024] [drm:drm_mode_setcrtc] [CRTC:93:pipe C]

<7> [212.821107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [212.821494] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [212.821994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [212.822144] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [212.822284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [212.919410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [212.920054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [212.920954] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [212.924137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.023160] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [213.023184] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.035507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.044201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.045751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.046142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.047381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.047717] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [213.048552] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.049111] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.049143] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.049439] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [213.063521] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.063532] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [213.063832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.064956] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.065965] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [213.066216] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [213.066263] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [213.066750] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.073528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.098088] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.103217] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.103722] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.103857] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.118404] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [213.118413] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [213.118641] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.118811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.119176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.119612] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.119630] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.119843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.120763] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.121060] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [213.121082] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [213.121089] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [213.121094] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [213.121099] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [213.121104] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [213.121108] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [213.121113] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [213.121117] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [213.121138] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [213.121143] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [213.121147] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [213.121152] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [213.121412] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.126182] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.150411] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.156359] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.156880] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.157076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.157991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.158111] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [213.158424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.158796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.158801] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.158914] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [213.171786] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.171791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [213.171910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.172348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.173183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [213.173214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.174135] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [213.175575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.199928] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.205355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.205822] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.205912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.220379] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [213.220387] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [213.221342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.221506] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.221814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.222207] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.222226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.222427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.223292] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [213.223323] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.224244] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [213.225699] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.250064] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.254818] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.255388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.255564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.256021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.256259] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.256593] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [213.256961] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.257994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [213.260844] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.285256] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.293919] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.294551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.294760] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.295935] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.296295] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [213.297055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.297645] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.297661] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.298022] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [213.313074] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.313087] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [213.313424] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.313879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.315289] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.316885] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [213.316989] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [213.322624] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.347395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.352426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.352970] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.353149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.353700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.354284] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.355819] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [213.356562] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [213.357638] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [213.357664] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [213.357870] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [213.358067] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [213.358284] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [213.364246] EDID block 0 is all zeroes

<7> [213.364252] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [213.364262] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364266] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364269] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364273] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364276] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364279] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364282] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364286] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.364300] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [213.364503] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [213.365405] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.365606] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [213.366354] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.366681] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.366906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.367545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.367842] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.368739] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [213.369182] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.370403] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [213.370427] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [213.373152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.397482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.402276] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.402798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.402894] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.403304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.403485] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [213.403547] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [213.403560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [213.403686] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.404615] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.404743] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [213.405310] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.405742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.405747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.405861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [213.418731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.418736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [213.418853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.418998] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.419831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [213.419855] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.420817] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.423457] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.447250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.451025] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.451496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.451592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.452550] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.452692] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [213.453255] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.453692] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.453697] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.453812] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [213.466715] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.466720] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [213.466838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.466987] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.467817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [213.467843] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.468786] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [213.471456] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.495799] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.500795] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.501296] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.501455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.516153] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [213.516161] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [213.516766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.516920] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.517505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.517955] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.517971] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.518185] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.519052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [213.519082] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.520044] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [213.522837] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.547206] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.553267] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.553802] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.553959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.554484] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.554785] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.555198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [213.555679] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.556697] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [213.559480] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.582393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.591051] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.591752] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.592003] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.593228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.593546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [213.594329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.594964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.594976] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.595293] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [213.610871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.610885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [213.611212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.611666] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.613060] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.614694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [213.614794] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [213.620123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.644610] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.650386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.650893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.651031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.651526] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.651992] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.653178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [213.653836] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [213.654806] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [213.654823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [213.654999] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [213.655186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [213.655396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [213.660813] EDID block 0 is all zeroes

<7> [213.660819] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [213.660826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660830] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660833] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660844] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660847] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.660860] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [213.661034] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [213.661890] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.662062] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [213.662747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.662947] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.663155] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.663782] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.663999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.664870] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [213.664908] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.665933] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.668498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.692818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.697776] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.698262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.698381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.699321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.699448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [213.700023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.700475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.700482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.700619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [213.713526] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.713531] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [213.713649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.713798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.714628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [213.714660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.715577] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [213.716992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.741345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.747309] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.747776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.747891] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.763273] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [213.763282] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [213.764233] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.764426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [213.764747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [213.765151] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [213.765171] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.765378] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.766256] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [213.766288] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.767223] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [213.770005] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.794382] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.800391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.800925] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.801081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.801604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.801891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.802305] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [213.802786] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.803799] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [213.806493] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.830904] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.839295] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.839911] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.840149] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.841447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.841816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [213.842633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [213.843240] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.843253] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.843643] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [213.858704] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [213.858718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [213.859028] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.859440] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.860518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [213.860924] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.862071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [213.867673] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.892111] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.897618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.898144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.898316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.898780] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.899248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.900447] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [213.901104] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [213.902080] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [213.902097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [213.902292] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [213.902503] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [213.902670] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [213.908221] EDID block 0 is all zeroes

<7> [213.908227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [213.908234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908246] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908252] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.908267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [213.908440] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [213.909275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.909487] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [213.910155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.910390] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.910580] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.911170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.911426] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.912306] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [213.912732] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.914030] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [213.914056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [213.916184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.940555] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.944888] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.945372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.945455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.945845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [213.946316] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [213.947530] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [213.948113] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [213.948932] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [213.948943] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [213.949064] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [213.949188] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [213.949304] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [213.954205] EDID block 0 is all zeroes

<7> [213.954208] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [213.954214] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954218] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954219] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954221] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954224] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954226] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.954234] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [213.954353] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [213.955045] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [213.955174] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [213.955696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [213.955889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [213.956021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [213.956553] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [213.956703] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [213.957573] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [213.958187] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [213.958204] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [213.958210] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [213.958213] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [213.958217] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [213.958220] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [213.958490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [213.961096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [213.985395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [213.989886] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [213.990362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [213.990471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [213.991419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.991568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [213.992153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [213.992595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [213.992600] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [213.992713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [214.005641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.005646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [214.005766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.005916] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.006746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [214.006772] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.007702] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [214.009127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.033265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.038211] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.038680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.038770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.053553] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [214.053560] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [214.054511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.054679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.054986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.055377] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [214.055397] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.055606] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.056461] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [214.056495] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.057419] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [214.058811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.083172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.089225] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.089695] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.089803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.090246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.090494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.090860] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [214.090890] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.091847] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [214.094486] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.118852] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.123751] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.124299] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.124493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.125577] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.125830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [214.126520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.127018] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.127026] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.127256] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [214.141248] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.141258] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [214.141475] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.141752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.142663] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [214.142704] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.143835] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [214.146503] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.170924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.176158] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.176683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.176832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.177338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.177835] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.179049] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [214.180483] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [214.181506] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [214.181526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [214.181715] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [214.181900] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [214.182081] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [214.187811] EDID block 0 is all zeroes

<7> [214.187817] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [214.187826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187836] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187848] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.187861] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [214.188046] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.188963] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.189173] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.189890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.190104] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.190330] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.190968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.191216] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.192139] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.193109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [214.193169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [214.195947] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.220272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.225320] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.225783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.225879] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.226815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.226938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [214.227490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.227910] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.227915] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.228029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [214.240912] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.240917] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [214.241035] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.241193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.242034] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [214.242057] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.243008] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [214.245495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.269838] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.274312] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.274773] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.274878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.289557] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [214.289565] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [214.290518] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.290694] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.291014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.291418] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [214.291441] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.291642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.292486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [214.292515] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.293448] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [214.296132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.320462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.326319] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.326854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.327010] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.327535] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.327822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.328233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [214.328660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.329728] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [214.332482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.356945] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.365684] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.366388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.366712] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.367922] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.368269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [214.369031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.369620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.369637] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.370001] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [214.385056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.385070] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [214.385401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.385853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.386833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [214.387260] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.388894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [214.394552] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.418994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.426039] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.426558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.426698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.427186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.427675] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.428913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [214.429584] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [214.430580] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [214.430598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [214.430771] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [214.430941] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [214.431139] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [214.436640] EDID block 0 is all zeroes

<7> [214.436645] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [214.436653] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436657] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436660] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436663] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436666] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436668] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436671] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436674] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.436686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [214.436859] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.437672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.437847] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.438519] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.438753] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.438944] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.439538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.439769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.440638] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [214.440671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.441692] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [214.444143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.468440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.474325] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.474787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.474870] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.475793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.475913] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [214.476215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.476615] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.476622] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.476743] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [214.489678] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.489684] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [214.489803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.489951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.490783] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [214.490807] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.491731] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [214.494168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.518476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.523865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.524351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.524460] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.539629] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [214.539637] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [214.540589] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.540746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.541056] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.541488] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [214.541508] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.541682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.542519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [214.542544] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.543482] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [214.546131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.570452] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.576436] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.576926] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.577046] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.577513] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.577730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.578108] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [214.578154] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.579157] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [214.581935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.606340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.615010] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.615673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.615925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.617104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.617463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [214.618308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.618979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.618991] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.619323] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [214.634848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.634862] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [214.635198] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.635580] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.636560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [214.636971] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.638648] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [214.643774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.668290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.675941] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.676501] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.676664] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.677192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.677671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.678919] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [214.679617] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [214.680717] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [214.680747] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [214.680959] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [214.681174] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [214.681429] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [214.687283] EDID block 0 is all zeroes

<7> [214.687289] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [214.687298] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687302] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687305] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687309] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687312] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687315] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687319] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687322] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.687336] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [214.687538] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.688454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.688657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.689412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.689645] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.689867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.690500] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.690814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.691734] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [214.692149] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.693196] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [214.696039] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.720402] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.725872] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.726357] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.726470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.727419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.727548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [214.728135] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.728575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.728580] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.728695] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [214.741596] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.741602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [214.741722] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.741873] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.742704] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [214.742730] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.743669] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [214.746372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.770719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.775254] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.775717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.775816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.791103] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [214.791111] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [214.792072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.792225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [214.792799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [214.793260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [214.793275] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.793484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.794331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [214.794358] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.795291] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [214.798050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.822394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.828386] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.828893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.829032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.829526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.829779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.830172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [214.830213] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.831175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [214.834049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.858393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.866997] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.867682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.867898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.869091] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.869460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [214.870311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [214.870942] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.870954] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.871275] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [214.886418] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [214.886432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [214.886742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.887144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.888191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [214.888604] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.890258] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [214.895757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.920201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.926288] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.926794] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.926933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.927428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [214.927893] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [214.929097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [214.929795] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [214.930752] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [214.930770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [214.930944] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [214.931113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [214.931299] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [214.936974] EDID block 0 is all zeroes

<7> [214.936979] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [214.936987] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.936990] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.936993] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.936996] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.936999] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.937002] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.937005] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.937008] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.937019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [214.937210] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [214.938022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [214.938213] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [214.938860] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [214.939057] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [214.939260] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [214.939880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.940098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.940990] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [214.941029] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.941969] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [214.944496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [214.968811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [214.973783] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [214.974265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [214.974376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [214.975326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.975455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [214.976032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [214.976484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.976491] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [214.976629] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [214.989540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [214.989547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [214.989668] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [214.989816] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [214.990647] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [214.990671] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [214.991605] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [214.994356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.018699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.023250] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.023719] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.023824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.038561] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [215.038568] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [215.039522] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.039681] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.039989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.040382] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [215.040395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.040572] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.041450] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [215.041478] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.042401] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [215.050351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.074391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.082439] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.082972] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.083147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.083681] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.083925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.084334] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [215.084379] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.085804] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [215.091108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.115205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.125458] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.125917] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.126004] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.126612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.126733] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [215.127297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.127739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.127746] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.127885] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [215.140788] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.140793] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [215.140918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.141069] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.141902] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [215.141927] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.142868] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [215.145447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.169803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.175741] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.176230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.176345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.176806] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.177274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.178409] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [215.179030] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [215.179914] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [215.179929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [215.180071] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [215.180226] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [215.180399] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [215.185545] EDID block 0 is all zeroes

<7> [215.185550] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [215.185556] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185559] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185562] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185564] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185566] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185569] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185571] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185573] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.185583] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [215.185724] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [215.186496] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.186637] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [215.187238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.187413] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.187568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.188109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.188298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.189185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [215.189216] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.190191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [215.192951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.217263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.221711] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.222192] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.222303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.223245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.223374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [215.223950] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.224409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.224414] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.224556] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [215.237456] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.237460] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [215.237579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.237728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.238559] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [215.238584] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.239508] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [215.242131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.266441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.272350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.272818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.272932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.288276] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [215.288284] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [215.288888] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.289030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.289633] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.290066] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [215.290081] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.290269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.291157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [215.291185] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.292104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [215.294881] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.319254] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.325231] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.325768] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.325925] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.326446] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.326733] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.327138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [215.327573] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.328635] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [215.331397] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.355805] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.364296] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.364914] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.365145] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.366442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.366815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [215.367610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.368243] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.368255] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.368618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [215.383653] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.383667] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [215.383973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.384383] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.385455] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [215.385865] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.387495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [215.393085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.417547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.422628] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.423151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.423323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.423787] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.424257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.425444] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [215.426102] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [215.427086] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [215.427103] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [215.427297] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [215.427508] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [215.427676] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [215.433219] EDID block 0 is all zeroes

<7> [215.433225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [215.433233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433239] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433242] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.433265] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [215.433437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [215.434275] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.434484] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [215.435154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.435389] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.435578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.436169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.436425] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.437299] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [215.437336] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.438358] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [215.441123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.465456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.469925] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.470404] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.470515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.471465] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.471598] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [215.472178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.472620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.472625] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.472740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [215.485642] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.485647] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [215.485765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.485914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.486744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [215.486768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.487703] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [215.489135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.513440] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.517929] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.518409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.518521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.532767] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [215.532776] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [215.533374] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.533495] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.534045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.534499] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [215.534518] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.534689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.535519] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [215.535545] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.536470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [215.539126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.563477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.568457] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.568942] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.569068] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.569531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.569769] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.570141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.571101] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [215.571146] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [215.573944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.598320] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.605418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.606009] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.606214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.607408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.607741] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [215.608205] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.608773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.608783] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.609032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [215.623508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.623519] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [215.623771] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.624091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.625050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [215.625481] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.627007] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [215.629935] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.654389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.660367] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.660882] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.661024] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.661528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.662002] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.663180] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [215.663850] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [215.664843] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [215.664862] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [215.665044] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [215.665239] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [215.665456] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [215.671057] EDID block 0 is all zeroes

<7> [215.671062] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [215.671071] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671074] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671077] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671080] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671084] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671086] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671089] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671092] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.671105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [215.671309] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [215.672181] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.672395] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [215.673054] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.673275] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.673514] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.674099] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.674338] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.675263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [215.675300] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.676314] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [215.679077] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.703375] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.708357] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.708818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.708901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.709505] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.709628] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [215.710193] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.710634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.710641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.710773] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [215.723677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.723682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [215.723799] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.723948] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.724780] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [215.724805] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.725737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [215.727144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.751453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.757418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.757893] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.757998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.773236] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [215.773243] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [215.774198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.774362] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [215.774925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [215.775380] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [215.775394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.775590] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.776428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [215.776454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.777378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [215.778808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.803164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.809615] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.810101] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.810241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.810717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.810913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.811291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [215.811329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.812294] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [215.815063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.839358] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.844382] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.844950] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.845146] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.846347] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.846671] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [215.847119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [215.847657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.847671] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.847967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [215.862485] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [215.862496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [215.862748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.863067] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.864033] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [215.864467] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.865564] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [215.868940] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.893406] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.898376] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.898931] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.899100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.899661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [215.900209] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [215.901474] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [215.902191] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [215.903294] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [215.903315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [215.903528] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [215.903737] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [215.903939] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [215.909874] EDID block 0 is all zeroes

<7> [215.909881] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [215.909891] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909895] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909899] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909902] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909906] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909909] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909913] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909916] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.909931] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [215.910170] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [215.911155] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [215.911411] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [215.912174] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [215.912459] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [215.912690] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [215.913340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.913654] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.914558] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [215.914984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.916038] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [215.918865] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.943227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.947672] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.948153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.948280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [215.949209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.949341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [215.949911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [215.950370] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.950375] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [215.950537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [215.963436] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [215.963441] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [215.963559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [215.963707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [215.964539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [215.964564] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [215.965490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [215.968122] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [215.992349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [215.997280] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [215.997748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [215.997852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.012741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [216.012748] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [216.013708] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.013840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.014411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.014844] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [216.014858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.015018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.015856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [216.015883] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.016850] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [216.019164] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.043485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.049377] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.049862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.049986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.050455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.050696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.051062] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [216.051091] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.052060] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [216.054884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.079266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.084370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.084938] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.085115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.086315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.086576] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [216.087019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.087552] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.087566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.087868] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [216.102357] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.102368] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [216.102623] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.102941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.103884] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [216.104316] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.105450] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [216.110787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.135227] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.140343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.140897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.141066] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.141621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.142157] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.143426] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [216.144153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [216.145228] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [216.145249] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [216.145464] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [216.145672] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [216.145878] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [216.151840] EDID block 0 is all zeroes

<7> [216.151847] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [216.151856] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151860] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151864] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151867] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151871] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151875] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151878] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151881] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.151896] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [216.152110] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [216.153067] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.153306] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [216.154086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.154351] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.154632] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.155269] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.155596] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.156498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [216.156925] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.157976] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [216.160514] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.184844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.189788] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.190274] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.190394] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.191341] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.191469] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [216.192042] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.192494] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.192501] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.192639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [216.205508] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.205513] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [216.205631] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.205779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.206610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [216.206635] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.207567] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [216.208994] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.233345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.237825] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.238305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.238422] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.253223] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [216.253230] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [216.254146] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.254296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.254594] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.254964] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [216.254976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.255133] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.255992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [216.256015] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.256975] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [216.259478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.283833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.289370] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.289856] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.289982] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.290449] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.290679] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.291046] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [216.291075] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.292045] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [216.294803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.319182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.324287] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.324854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.325032] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.326225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.326485] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [216.326930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.327463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.327477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.327777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [216.342277] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.342288] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [216.342544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.342864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.343808] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [216.344238] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.345393] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [216.348180] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.372649] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.381514] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.382069] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.382256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.382835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.383325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.384658] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [216.385367] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [216.386456] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [216.386478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [216.386690] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [216.386896] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [216.387099] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [216.393151] EDID block 0 is all zeroes

<7> [216.393158] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [216.393167] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393171] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393175] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393179] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393182] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393186] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393189] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393192] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.393207] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [216.393420] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [216.394345] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.394588] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [216.395342] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.395584] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.395818] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.396456] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.396772] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.397679] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [216.398104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.399166] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [216.402044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.426423] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.430930] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.431409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.431529] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.432464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.432596] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [216.433182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.433622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.433627] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.433740] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [216.446643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.446648] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [216.446765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.446913] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.447744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [216.447768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.448716] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [216.450138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.473872] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.477992] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.478457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.478554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.493210] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [216.493222] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [216.494180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.494391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.494760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.495244] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [216.495265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.495483] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.496378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [216.496415] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.497355] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [216.498796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.523201] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.528227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.528686] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.528783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.529195] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.529357] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.529712] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [216.529738] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.530671] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [216.532063] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.556390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.561418] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.561934] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.562074] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.562768] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.562953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [216.563565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.564003] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.564010] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.564205] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [216.577223] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.577229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [216.577414] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.577643] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.578537] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [216.578570] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.579502] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [216.582171] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.606559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.611435] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.612004] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.612202] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.612739] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.613259] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.614516] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [216.615192] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [216.616246] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [216.616268] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [216.616489] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [216.616705] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [216.616919] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [216.622991] EDID block 0 is all zeroes

<7> [216.622998] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [216.623008] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623012] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623016] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623019] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623023] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623027] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623030] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623034] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.623050] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [216.623305] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [216.624192] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.624414] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [216.625186] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.625438] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.625681] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.626339] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.626617] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.627526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [216.627567] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.628570] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [216.631194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.655568] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.659920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.660399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.660496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.661432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.661560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [216.662121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.662572] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.662578] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.662702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [216.675616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.675621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [216.675738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.675886] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.676717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [216.676741] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.677664] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [216.679080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.703373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.707850] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.708331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.708428] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.723220] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [216.723227] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [216.724175] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.724296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.724847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.725302] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [216.725315] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.725464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.726293] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [216.726317] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.727243] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [216.728656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.752395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.757399] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.757867] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.757981] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.758423] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.758614] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.758986] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [216.759013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.759945] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [216.762475] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.786833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.795509] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.796146] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.796357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.797509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.797845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [216.798355] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [216.798889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.798900] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.799167] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [216.813683] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [216.813694] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [216.813955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.814296] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.815233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [216.815655] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.817212] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [216.820145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.844606] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.849631] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.850182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.850328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.850829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [216.851313] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [216.852630] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [216.853367] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [216.854446] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [216.854478] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [216.854730] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [216.854981] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [216.855205] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [216.861184] EDID block 0 is all zeroes

<7> [216.861191] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [216.861201] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861205] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861209] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861212] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861216] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861219] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861223] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861226] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.861241] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [216.861454] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [216.862360] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [216.862572] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [216.863304] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [216.863553] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [216.863860] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [216.864529] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.864818] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.865721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [216.865760] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.867238] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [216.870044] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.894387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.899865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.900346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.900429] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.901354] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.901507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [216.902083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [216.902534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.902539] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [216.902653] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [216.915595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [216.915601] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [216.915720] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.915869] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.916701] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [216.916726] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.917649] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [216.919106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.943439] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [216.947875] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [216.948356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [216.948439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [216.963225] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [216.963231] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [216.964180] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.964300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [216.964849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [216.965312] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [216.965324] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [216.965686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [216.966518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [216.966543] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [216.967470] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [216.970067] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [216.994400] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.000354] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.000825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.000934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.001382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.001577] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.002014] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [217.002400] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.003426] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [217.006163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.030517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.039079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.039714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.039924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.041055] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.041419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [217.042283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.042921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.042933] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.043290] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [217.058806] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.058820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [217.059146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.059530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.060514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [217.060920] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.062526] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [217.067796] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.092314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.101482] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.102029] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.102211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.102722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.103215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.104519] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [217.105182] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [217.106270] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [217.106292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [217.106496] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [217.106714] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [217.106913] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [217.112852] EDID block 0 is all zeroes

<7> [217.112859] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [217.112870] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112876] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112880] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112884] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112887] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112890] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112894] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112897] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.112912] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [217.113115] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [217.114019] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.114244] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [217.114983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.115272] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.115496] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.116138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.116393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.117285] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [217.117321] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.118766] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [217.121469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.145800] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.149920] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.150398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.150482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.151413] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.151567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [217.152153] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.152595] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.152600] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.152714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [217.165643] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.165649] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [217.165769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.165917] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.166746] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [217.166771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.167704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [217.170170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.194494] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.199338] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.199797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.199887] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.214749] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [217.214756] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [217.215700] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.215830] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.216158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.216570] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [217.216590] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.216750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.217586] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [217.217611] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.218554] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [217.221332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.245688] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.251613] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.252102] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.252239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.252749] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.252968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.253363] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [217.253794] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.254843] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [217.257166] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.281567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.289932] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.290589] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.290841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.292021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.292380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [217.293185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.293826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.293838] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.294156] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [217.309299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.309312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [217.309619] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.310003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.311435] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.312909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [217.313013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [217.318664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.343194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.350951] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.351510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.351674] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.352203] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.352719] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.353993] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [217.354715] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [217.355781] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [217.355801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [217.356006] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [217.356225] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [217.356473] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [217.362430] EDID block 0 is all zeroes

<7> [217.362438] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [217.362448] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362455] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362459] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362462] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362465] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362469] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362472] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362476] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.362490] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [217.362696] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [217.363639] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.363845] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [217.364598] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.364876] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.365101] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.365748] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.366046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.366959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [217.367000] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.367971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [217.373107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.397483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.401851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.402331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.402443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.403391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.403519] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [217.404092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.404544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.404551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.404688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [217.417592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.417598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [217.417718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.417866] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.418699] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [217.418724] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.419656] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [217.422393] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.446735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.452744] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.453225] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.453349] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.468142] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [217.468150] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [217.469093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.469235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.469826] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.470282] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [217.470295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.470471] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.471342] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [217.471370] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.472293] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [217.475036] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.499401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.504452] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.504936] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.505062] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.505534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.505805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.506197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [217.506239] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.507269] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [217.510084] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.534443] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.542952] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.543658] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.543911] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.545090] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.545447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [217.546279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.546955] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.546967] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.547299] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [217.562834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.562848] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [217.563190] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.563575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.564554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [217.564966] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.566703] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [217.572134] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.596597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.601670] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.602191] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.602371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.602829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.603297] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.604469] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [217.605153] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [217.606148] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [217.606168] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [217.606402] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [217.606573] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [217.606740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [217.612220] EDID block 0 is all zeroes

<7> [217.612225] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [217.612233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612237] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612254] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.612266] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [217.612437] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [217.613267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.613469] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [217.614115] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.614328] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.614549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.615162] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.615414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.616288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [217.616327] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.617353] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [217.620126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.644456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.648852] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.649332] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.649444] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.650395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.650524] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [217.651105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.651558] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.651564] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.651702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [217.664607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.664612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [217.664730] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.664879] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.665710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [217.665734] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.666674] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [217.669413] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.693757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.699740] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.700226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.700350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.715857] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [217.715865] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [217.716825] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.716956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.717532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.717959] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [217.717973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.718146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.718998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [217.719023] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.719981] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [217.722453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.746803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.751749] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.752275] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.752443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.752908] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.753136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.753486] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [217.753853] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.754894] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [217.757142] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.781496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.790143] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.790813] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.791063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.792292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.792610] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [217.793395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [217.794034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.794046] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.794364] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [217.809470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [217.809483] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [217.809790] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.810194] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.811284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [217.811692] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.813333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [217.818823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.843325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.853526] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.854071] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.854255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.854803] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [217.855278] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [217.856580] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [217.857300] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [217.858364] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [217.858385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [217.858588] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [217.858787] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [217.858984] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [217.864857] EDID block 0 is all zeroes

<7> [217.864864] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [217.864874] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864881] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864885] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864888] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864892] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864895] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864899] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864902] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.864916] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [217.865119] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [217.866049] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [217.866277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [217.867049] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [217.867303] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [217.867595] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [217.868229] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.868527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.869426] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [217.869854] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.870949] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [217.876101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.900431] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.904901] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.905378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.905490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.906440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.906568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [217.907152] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [217.907594] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.907599] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [217.907714] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [217.920616] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [217.920621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [217.920740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.920888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.921719] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [217.921743] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.922683] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [217.925420] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [217.949775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [217.954314] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [217.954775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [217.954880] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [217.969783] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [217.969790] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [217.970411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.970545] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [217.971106] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [217.971552] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [217.971572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [217.971757] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [217.972595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [217.972624] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [217.973562] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [217.976294] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.000545] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.005492] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.005998] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.006176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.006674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.006893] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.007286] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [218.007329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.008309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [218.011175] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.035559] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.044022] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.044630] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.044810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.045975] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.046343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [218.047105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.047721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.047737] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.048100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [218.063625] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.063639] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [218.063949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.064358] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.065435] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [218.065845] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.067010] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [218.072610] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.097055] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.102618] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.103150] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.103340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.103795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.104265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.105442] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [218.106099] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [218.107067] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [218.107085] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [218.107272] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [218.107479] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [218.107649] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [218.113214] EDID block 0 is all zeroes

<7> [218.113219] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [218.113228] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113231] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113234] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113237] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113240] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113243] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113245] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113248] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.113260] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [218.113435] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [218.114267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.114479] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [218.115145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.115378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.115567] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.116164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.116441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.117321] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [218.117364] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.118345] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [218.121148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.145421] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.150838] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.151330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.151433] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.152382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.152509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [218.153082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.153534] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.153541] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.153680] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [218.166584] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.166590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [218.166708] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.166857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.167694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [218.167719] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.168662] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [218.171372] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.195723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.200258] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.200739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.200854] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.215770] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [218.215779] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [218.216739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.216883] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.217456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.217904] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [218.217919] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.218096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.218943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [218.218971] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.219932] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [218.222495] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.246857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.251709] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.252221] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.252377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.252842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.253060] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.253514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [218.253893] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.254948] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [218.257174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.281486] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.290986] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.291659] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.291876] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.293086] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.293452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [218.294314] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.294945] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.294957] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.295274] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [218.310415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.310429] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [218.310736] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.311119] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.312537] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.314105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [218.314191] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [218.319642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.344083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.349131] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.349639] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.349778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.350286] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.350759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.351956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [218.352649] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [218.353630] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [218.353651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [218.353826] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [218.353996] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [218.354194] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [218.359804] EDID block 0 is all zeroes

<7> [218.359809] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [218.359817] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359835] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359838] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.359850] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [218.360023] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [218.360901] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.361076] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [218.361758] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.361957] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.362165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.362779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.362997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.363867] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [218.363906] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.364915] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [218.367462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.391758] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.395954] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.396432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.396552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.397498] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.397618] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [218.398178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.398619] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.398624] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.398738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [218.411639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.411644] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [218.411763] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.411910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.412747] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [218.412772] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.413689] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [218.415105] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.439409] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.444863] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.445359] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.445450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.460262] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [218.460270] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [218.461223] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.461353] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.461912] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.462373] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [218.462390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.462591] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.463468] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [218.463493] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.464426] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [218.467095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.491369] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.496385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.496874] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.496993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.497461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.497678] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.498056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [218.498087] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.499069] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [218.501931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.526323] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.532341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.533046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.533321] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.534544] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.534877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [218.535396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.535930] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.535941] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.536208] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [218.550751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.550762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [218.551019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.551362] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.552300] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [218.552721] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.554265] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [218.557132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.581601] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.588089] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.588617] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.588762] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.589259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.589711] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.590936] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [218.591592] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [218.592608] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [218.592627] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [218.592807] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [218.592982] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [218.593192] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [218.598823] EDID block 0 is all zeroes

<7> [218.598828] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [218.598837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598840] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598846] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598849] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598852] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598855] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598858] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.598871] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [218.599051] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [218.599897] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.600077] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [218.600757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.601002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.601264] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.601891] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.602149] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.603015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [218.603048] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.604065] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [218.606858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.631196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.636197] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.636663] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.636746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.637660] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.637778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [218.638077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.638490] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.638497] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.638612] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [218.651518] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.651524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [218.651643] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.651791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.652620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [218.652645] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.653569] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [218.655019] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.679300] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.684301] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.684762] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.684852] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.699743] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [218.699751] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [218.700693] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.700824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.701149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.701563] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [218.701583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.701747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.702583] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [218.702608] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.703556] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [218.705020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.729396] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.734391] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.734863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.734970] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.735417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.735612] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.735977] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [218.736005] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.736978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [218.739136] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.763514] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.768440] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.768987] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.769161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.770235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.770560] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [218.771067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [218.771600] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.771615] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.771875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [218.786412] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [218.786424] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [218.786678] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.787000] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.787945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [218.787992] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.789096] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [218.792048] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.816525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.821447] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.821983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.822148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.822651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [218.823119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [218.824415] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [218.825158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [218.826179] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [218.826200] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [218.826491] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [218.826740] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [218.826990] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [218.833052] EDID block 0 is all zeroes

<7> [218.833059] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [218.833069] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833073] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833077] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833080] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833084] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833088] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833091] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833095] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.833109] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [218.833350] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [218.834258] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [218.834472] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [218.835257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [218.835503] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [218.835746] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [218.836399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.836664] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.837582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [218.837993] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.839054] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [218.841849] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.866182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.871667] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.872153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.872237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.873163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.873311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [218.873863] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [218.874325] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.874330] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [218.874473] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [218.887364] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [218.887369] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [218.887488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.887636] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.888465] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [218.888490] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.889418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [218.890808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.915167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.921079] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.921552] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.921655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.936508] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [218.936515] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [218.937463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.937625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [218.937931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [218.938321] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [218.938338] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.938538] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.939395] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [218.939425] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.940346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [218.943135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [218.967450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [218.973355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [218.973862] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [218.974001] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [218.974497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [218.974752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [218.975146] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [218.976098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [218.976147] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [218.978951] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.003346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.012048] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.012735] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.012952] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.014160] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.014470] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [219.015249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.015879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.015891] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.016233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [219.031777] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.031791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [219.032098] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.032505] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.033578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [219.033989] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.035169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [219.038184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.062599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.068378] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.068869] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.068989] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.069472] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.069948] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.071168] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [219.071829] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [219.072802] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [219.072823] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [219.072998] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [219.073200] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [219.073424] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [219.078985] EDID block 0 is all zeroes

<7> [219.078990] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [219.078998] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079001] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079005] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079007] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079010] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079013] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079016] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079019] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.079031] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [219.079226] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [219.080088] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.080277] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [219.080963] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.081178] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.081405] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.081984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.082235] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.083141] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.084098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [219.084156] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [219.086938] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.111282] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.116277] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.116737] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.116832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.117766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.117884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [219.118426] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.118878] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.118883] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.118996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [219.131904] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.131909] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [219.132027] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.132193] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.133023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [219.133054] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.133975] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [219.136476] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.160827] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.165331] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.165801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.165914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.180382] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [219.180390] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [219.181343] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.181500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.181832] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.182248] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.182264] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.182451] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.183326] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [219.183353] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.184271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [219.187032] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.211388] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.217390] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.217924] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.218081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.218599] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.218861] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.219289] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [219.219329] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.220286] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [219.223200] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.247602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.257769] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.258473] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.258724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.259953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.260308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [219.261094] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.261705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.261717] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.262038] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [219.277098] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.277109] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [219.277463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.277875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.278887] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [219.279309] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.280843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [219.286076] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.310485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.316317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.316824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.316962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.317462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.317926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.319118] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [219.319796] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [219.320749] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [219.320766] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [219.320942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [219.321113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [219.321303] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [219.326811] EDID block 0 is all zeroes

<7> [219.326817] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [219.326824] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326828] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326831] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326839] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326842] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326845] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.326857] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [219.327030] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [219.327880] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.328052] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [219.328737] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.328938] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.329148] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.329779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.329997] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.330869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [219.330908] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.331924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [219.334466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.358786] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.363774] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.364260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.364373] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.365322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.365450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [219.366027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.366480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.366487] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.366624] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [219.379531] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.379536] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [219.379655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.379803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.380631] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [219.380656] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.381590] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [219.384168] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.408512] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.413881] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.414366] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.414491] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.429115] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [219.429123] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [219.430083] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.430222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.430784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.431238] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.431251] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.431442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.432279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [219.432304] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.433231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [219.435984] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.460353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.465945] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.466464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.466604] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.467071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.467320] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.467620] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [219.468012] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.469055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [219.471905] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.496294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.506013] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.506715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.506966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.508202] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.508517] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [219.509299] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.509933] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.509945] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.510260] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [219.525399] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.525412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [219.525717] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.526103] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.527522] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.528996] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [219.529099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [219.534656] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.559097] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.565082] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.565602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.565742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.566226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.566705] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.567894] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [219.568606] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [219.569581] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [219.569599] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [219.569772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [219.569942] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [219.570111] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [219.575626] EDID block 0 is all zeroes

<7> [219.575632] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [219.575640] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575643] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575646] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575649] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575652] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575655] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575657] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575660] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.575672] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [219.575847] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [219.576709] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.576881] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [219.577538] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.577736] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.577926] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.578523] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.578780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.579652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [219.579691] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.580725] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [219.583474] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.607792] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.612780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.613266] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.613379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.614327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.614457] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [219.615031] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.615483] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.615489] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.615627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [219.628535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.628540] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [219.628657] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.628805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.629635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [219.629660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.630592] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [219.633340] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.657682] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.662688] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.663165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.663300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.677732] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [219.677739] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [219.678222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.678381] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.678689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.679068] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.679082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.679252] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.680117] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [219.680149] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.681069] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [219.683829] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.708182] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.714234] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.714742] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.714881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.715364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.715633] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.716012] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [219.716044] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.717033] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [219.719895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.744294] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.753059] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.753765] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.754016] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.755242] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.755635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [219.756500] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [219.757260] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.757275] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.757732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [219.773809] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [219.773826] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [219.774230] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.774800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.775841] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [219.776272] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.778076] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [219.783860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.808342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.814346] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.814843] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.814978] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.815465] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [219.815922] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [219.817111] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [219.817784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [219.818740] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [219.818757] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [219.818925] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [219.819087] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [219.819259] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [219.824800] EDID block 0 is all zeroes

<7> [219.824806] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [219.824814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824819] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824823] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.824849] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [219.825015] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [219.825855] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [219.826022] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [219.826696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [219.826889] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [219.827072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [219.827661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.827907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.828775] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [219.828811] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.829819] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [219.832498] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.856807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.861777] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.862263] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.862375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.863325] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.863454] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [219.864028] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [219.864481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.864488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [219.864626] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [219.877502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [219.877507] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [219.877626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.877774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.878604] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [219.878629] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.879560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [219.882307] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.906661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.912579] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.913050] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.913178] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.928084] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [219.928093] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [219.928704] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.928847] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [219.929176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [219.929600] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [219.929615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.929791] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.930637] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [219.930667] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.931616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [219.934356] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.958718] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [219.963701] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [219.964230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [219.964401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [219.964863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [219.965080] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [219.965549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [219.965912] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [219.966946] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [219.969170] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [219.993544] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.002265] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.002946] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.003239] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.004536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.004909] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [220.005721] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.006466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.006481] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.006851] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [220.022951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.022968] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [220.023421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.023989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.025487] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.027026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [220.027118] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.032586] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.057020] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.062121] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.062633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.062766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.063245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.063714] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.064910] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [220.065605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [220.066609] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [220.066630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [220.066799] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [220.066961] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [220.067121] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [220.072607] EDID block 0 is all zeroes

<7> [220.072613] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [220.072621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072626] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072633] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072636] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072639] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072642] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072644] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.072656] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [220.072823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [220.073665] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.073832] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [220.074497] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.074690] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.074874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.075460] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.075707] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.076572] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [220.076609] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.077606] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.080376] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.104689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.109683] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.110168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.110296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.111228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.111357] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [220.111932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.112391] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.112397] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.112538] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [220.125437] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.125442] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [220.125561] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.125710] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.126539] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [220.126564] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.127490] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.130091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.154394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.159947] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.160427] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.160552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.175173] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [220.175180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [220.176118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.176259] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.176849] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.177303] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [220.177318] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.177500] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.178361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [220.178389] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.179313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.182025] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.206393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.212385] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.212894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.213033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.213525] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.213780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.214172] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [220.214214] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.215216] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.218071] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.242447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.250978] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.251683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.251935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.253176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.253511] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [220.254293] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.254926] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.254938] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.255259] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [220.270372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.270385] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [220.270689] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.271075] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.272490] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.274340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [220.274418] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.279989] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.304505] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.314582] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.315142] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.315346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.315848] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.316324] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.317585] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [220.318304] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [220.319380] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [220.319410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [220.319615] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [220.319815] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [220.320009] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [220.325796] EDID block 0 is all zeroes

<7> [220.325800] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [220.325806] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325808] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325810] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325812] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325814] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325816] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325818] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325820] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.325829] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [220.325950] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [220.326671] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.326793] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [220.327348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.327486] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.327618] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.328150] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.328328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.329160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [220.329194] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.330125] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.331582] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.355855] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.360780] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.361265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.361376] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.362328] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.362463] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [220.363037] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.363489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.363496] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.363633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [220.376542] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.376547] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [220.376665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.376814] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.377643] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [220.377668] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.378602] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.380029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.404390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.409869] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.410352] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.410474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.425364] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [220.425372] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [220.426327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.426488] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.426796] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.427188] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [220.427202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.427404] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.428241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [220.428269] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.429193] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.430649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.455007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.460753] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.461260] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.461380] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.461832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.462049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.462485] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [220.462879] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.463890] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.466496] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.490881] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.499317] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.499908] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.500088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.501270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.501574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [220.502356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.502996] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.503008] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.503338] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [220.518896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.518910] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [220.519243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.519701] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.521093] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.522742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [220.522822] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.528174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.552656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.559238] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.559763] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.559904] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.560421] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.560937] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.562184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [220.562876] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [220.563944] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [220.563970] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [220.564185] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [220.564431] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [220.564629] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [220.570550] EDID block 0 is all zeroes

<7> [220.570558] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [220.570568] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570575] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570580] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570583] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570587] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570590] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570593] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.570611] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [220.570813] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [220.571747] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.571949] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [220.572694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.572926] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.573174] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.573835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.574089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.574992] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [220.575030] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.576028] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.581107] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.605441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.609851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.610331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.610443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.611393] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.611520] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [220.612092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.612544] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.612551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.612698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [220.625602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.625607] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [220.625726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.625875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.626707] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [220.626732] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.627672] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.629089] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.653395] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.657900] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.658378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.658490] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.673376] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [220.673383] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [220.674330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.674480] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.675030] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.675484] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [220.675504] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.675674] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.676503] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [220.676530] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.677453] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.680097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.704398] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.709477] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.709963] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.710089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.710575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.710857] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.711249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [220.711292] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.712248] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.715100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.739447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.748026] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.748713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.748930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.750103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.750490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [220.751458] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [220.752218] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.752240] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.752700] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [220.769269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [220.769287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [220.769670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.770184] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.771327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [220.771729] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.773926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [220.779667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.804158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.810227] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.810715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.810830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.811293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [220.811757] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [220.812949] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [220.813640] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [220.814602] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [220.814620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [220.814788] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [220.814952] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [220.815113] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [220.820608] EDID block 0 is all zeroes

<7> [220.820613] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [220.820621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820627] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820630] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820633] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820636] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820641] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.820653] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [220.820821] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [220.821662] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [220.821829] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [220.822495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [220.822689] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [220.822872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [220.823454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.823714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.824582] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [220.824614] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.825625] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [220.828384] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.852692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.857685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.858176] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.858297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.859249] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.859392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [220.859945] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [220.860404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.860409] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [220.860552] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [220.873446] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [220.873451] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [220.873571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.873720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.874549] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [220.874574] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.875500] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [220.878123] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.902479] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.907426] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.907895] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.908009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.923353] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [220.923361] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [220.924313] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.924491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [220.924814] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [220.925216] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [220.925231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.925432] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.926312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [220.926344] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.927271] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [220.930047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.954391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.960368] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [220.960900] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [220.961057] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [220.961583] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [220.961872] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [220.962280] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [220.962328] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [220.963384] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [220.966186] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [220.990603] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [220.999403] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.000083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.000424] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.001827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.002254] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [221.003105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.003775] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.003796] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.004284] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [221.020939] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.020956] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [221.021371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.021969] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.023492] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.025200] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [221.025288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [221.030810] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.055255] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.061201] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.061689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.061804] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.062270] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.062744] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.063939] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [221.064601] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [221.065539] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [221.065559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [221.065727] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [221.065889] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [221.066050] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [221.071574] EDID block 0 is all zeroes

<7> [221.071580] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [221.071588] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071592] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071597] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071601] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071603] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071606] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071609] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071612] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.071623] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [221.071789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [221.072576] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.072743] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [221.073390] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.073581] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.073764] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.074358] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.074568] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.075436] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [221.075466] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.076410] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [221.079154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.103399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.107894] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.108372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.108484] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.109440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.109568] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [221.110151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.110593] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.110598] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.110712] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [221.123592] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.123598] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [221.123718] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.123867] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.124725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [221.124750] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.125670] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [221.128401] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.152744] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.158685] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.159173] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.159287] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.174180] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [221.174188] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [221.175121] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.175264] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.175858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.176318] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [221.176332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.176518] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.177388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [221.177417] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.178339] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [221.181055] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.205416] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.210956] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.211499] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.211620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.212072] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.212304] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.212641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [221.213013] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.214062] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [221.216909] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.241293] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.250037] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.250689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.250906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.252081] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.252424] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [221.253283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.253914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.253926] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.254271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [221.269852] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.269866] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [221.270210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.270679] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.271661] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [221.272071] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.273733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [221.279144] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.303645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.311341] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.311866] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.312006] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.312534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.312994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.314185] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [221.314890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [221.315910] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [221.315929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [221.316153] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [221.316359] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [221.316557] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [221.322401] EDID block 0 is all zeroes

<7> [221.322405] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [221.322412] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322415] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322417] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322419] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322423] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322425] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322427] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322429] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.322438] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [221.322559] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [221.323264] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.323384] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [221.323917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.324054] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.324197] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.324751] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.324903] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.325745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [221.325771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.326722] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [221.329427] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.353698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.358694] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.359188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.359295] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.360244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.360371] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [221.360944] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.361405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.361410] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.361551] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [221.374470] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.374475] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [221.374594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.374743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.375573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [221.375598] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.376524] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [221.379125] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.403446] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.409367] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.409825] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.409924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.424801] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [221.424809] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [221.425769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.425925] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.426256] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.426681] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [221.426696] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.426871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.427718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [221.427749] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.428690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [221.431470] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.455840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.460754] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.461321] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.461506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.461991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.462269] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.462952] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [221.462989] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.463991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [221.466868] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.491297] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.501524] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.502298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.502568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.503855] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.504280] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [221.505172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.505921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.505936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.506358] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [221.523045] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.523062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [221.523478] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.524050] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.525527] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.527056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [221.527150] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [221.532578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.557070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.562633] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.563148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.563284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.563748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.564215] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.565351] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [221.566005] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [221.566975] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [221.566996] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [221.567176] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [221.567379] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [221.567543] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [221.573006] EDID block 0 is all zeroes

<7> [221.573012] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [221.573020] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573024] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573029] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573032] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573035] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573038] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573041] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573043] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.573056] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [221.573235] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [221.574105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.574291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [221.574976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.575182] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.575403] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.575974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.576195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.577098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [221.577130] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.578126] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [221.580888] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.605180] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.610107] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.610575] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.610658] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.611258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.611402] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [221.611952] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.612413] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.612418] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.612561] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [221.625460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.625466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [221.625585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.625732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.626562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [221.626586] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.627514] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [221.630124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.654478] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.659887] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.660390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.660533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.675204] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [221.675212] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [221.676166] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.676342] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.676663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.677055] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [221.677069] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.677256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.678145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [221.678173] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.679093] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [221.681871] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.706230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.712241] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.712757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.712892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.713386] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.713682] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.714077] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [221.714114] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.715112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [221.717986] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.742394] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.748343] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.748960] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.749200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.750443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.750765] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [221.751484] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.752056] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.752067] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.752333] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [221.766863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.766874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [221.767148] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.767528] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.768477] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [221.768890] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.770456] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [221.773146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.797599] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.803342] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.803857] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.803999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.804496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [221.804950] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [221.806259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [221.806926] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [221.807875] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [221.807893] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [221.808075] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [221.808271] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [221.808444] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [221.814046] EDID block 0 is all zeroes

<7> [221.814051] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [221.814059] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814063] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814066] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814069] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814072] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814075] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814078] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814081] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.814094] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [221.814295] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [221.815121] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [221.815318] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [221.815978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [221.816205] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [221.816404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [221.816988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.817221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.818087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [221.818120] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.819080] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [221.821853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.846198] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.850640] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.851109] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.851217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.852159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.852288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [221.852848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [221.853307] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.853312] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.853437] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [221.866315] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [221.866320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [221.866448] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.866607] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.867449] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [221.867472] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.868400] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [221.869805] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.894166] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.899136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.899593] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.899697] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.914159] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [221.914167] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [221.915104] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.915247] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [221.915805] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [221.916260] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [221.916274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.916434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.917271] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [221.917295] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.918221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [221.919653] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.944006] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.949407] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.949894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.950019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.950480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [221.950689] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [221.951072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [221.951101] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [221.952032] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [221.954858] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [221.979224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [221.984360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [221.984929] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [221.985109] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [221.986276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.986556] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [221.987023] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [221.987583] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [221.987594] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [221.987863] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [222.001909] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.001919] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [222.002227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.002561] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.003514] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [222.003919] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.004956] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [222.007897] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.032353] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.038408] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.038906] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.039031] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.039522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.039995] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.041178] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [222.041845] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [222.042835] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [222.042854] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [222.043034] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [222.043235] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [222.043453] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [222.049062] EDID block 0 is all zeroes

<7> [222.049067] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [222.049075] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049079] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049082] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049085] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049088] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049091] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049094] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049097] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.049109] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [222.049314] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [222.050164] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.050344] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [222.051005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.051243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.051440] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.052025] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.052258] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.053133] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [222.053166] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.054114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [222.056890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.081226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.085756] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.086238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.086336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.087279] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.087399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [222.087948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.088406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.088411] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.088524] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [222.101414] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.101419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [222.101537] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.101687] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.102523] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [222.102548] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.103471] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [222.104807] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.129162] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.135152] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.135602] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.135693] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.150131] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [222.150139] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [222.151082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.151238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.151811] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.152272] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [222.152288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.152449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.153288] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [222.153313] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.154238] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [222.155667] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.180028] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.185979] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.186515] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.186636] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.187087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.187321] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.187640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [222.188028] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.189072] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [222.191926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.216319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.225035] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.225684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.225901] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.227074] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.227414] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [222.228270] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.228896] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.228908] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.229233] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [222.244772] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.244786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [222.245097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.245502] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.246570] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [222.246984] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.248649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [222.254154] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.278656] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.286360] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.286884] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.287025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.287551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.288013] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.289184] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [222.289890] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [222.290908] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [222.290927] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [222.291147] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [222.291346] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [222.291544] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [222.297424] EDID block 0 is all zeroes

<7> [222.297431] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [222.297441] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297448] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297452] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297456] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297459] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297462] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297466] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297469] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.297484] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [222.297686] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [222.298590] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.298791] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [222.299501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.299730] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.299952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.300585] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.300838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.301731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [222.301768] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.302736] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [222.308096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.332471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.337859] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.338349] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.338434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.339360] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.339492] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [222.340077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.340529] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.340536] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.340674] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [222.353555] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.353560] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [222.353679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.353827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.354665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [222.354690] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.355617] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [222.358335] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.382587] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.388355] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.388868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.388959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.404260] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [222.404267] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [222.405222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.405385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.405946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.406408] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [222.406422] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.406622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.407463] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [222.407491] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.408420] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [222.411098] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.435432] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.440446] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.440952] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.441090] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.441594] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.441850] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.442242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [222.442285] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.443264] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [222.446124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.470507] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.479029] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.479647] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.479827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.480969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.481307] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [222.482069] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.482654] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.482670] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.483029] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [222.498095] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.498108] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [222.498450] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.498914] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.499896] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [222.500324] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.501931] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [222.507555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.531994] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.539086] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.539604] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.539744] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.540229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.540717] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.541933] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [222.542608] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [222.543580] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [222.543598] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [222.543772] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [222.543940] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [222.544106] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [222.549600] EDID block 0 is all zeroes

<7> [222.549604] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [222.549610] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549612] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549614] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549616] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549618] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549620] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549622] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.549633] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [222.549752] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [222.550468] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.550589] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [222.551139] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.551309] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.551441] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.551959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.552109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.552944] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [222.552969] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.553942] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [222.556481] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.580756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.585778] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.586262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.586375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.587321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.587448] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [222.588024] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.588476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.588482] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.588621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [222.601528] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.601533] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [222.601651] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.601799] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.602629] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [222.602653] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.603585] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [222.606331] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.630680] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.635687] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.636172] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.636312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.651117] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [222.651133] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [222.652076] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.652232] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.652582] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.652973] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [222.652988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.653177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.654063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [222.654089] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.655051] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [222.657827] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.682186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.688263] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.688770] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.688910] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.689392] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.689661] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.690040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [222.690073] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.691049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [222.693902] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.718306] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.727988] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.728622] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.728832] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.729965] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.730241] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [222.731067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.731672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.731689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.732046] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [222.747141] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.747154] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [222.747458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.747841] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.748827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [222.749251] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.750886] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [222.756534] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.780974] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.785726] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.786246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.786416] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.786882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [222.787351] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [222.788558] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [222.789183] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [222.790169] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [222.790194] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [222.790396] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [222.790565] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [222.790734] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [222.796222] EDID block 0 is all zeroes

<7> [222.796227] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [222.796235] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796256] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.796268] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [222.796441] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [222.797271] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [222.797482] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [222.798146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [222.798355] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [222.798545] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [222.799134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.799351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.800222] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [222.800254] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.801211] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [222.803934] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.828265] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.832800] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.833281] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.833379] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.834321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.834450] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [222.835009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [222.835460] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.835465] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.835590] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [222.848500] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [222.848505] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [222.848624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.848773] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.849603] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [222.849628] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.850560] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [222.853323] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.877667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.883171] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.883633] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.883738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.898598] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [222.898606] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [222.899078] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.899221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [222.899563] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [222.899943] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [222.899957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.900117] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.900957] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [222.900982] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.901934] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [222.904450] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.928807] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.934732] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.935236] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.935413] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.935875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.936092] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.936558] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [222.936922] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.937957] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [222.940143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [222.964490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [222.973230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [222.973913] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [222.974196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [222.975516] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.976021] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [222.976932] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [222.977624] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.977640] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [222.978009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [222.994094] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [222.994111] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [222.994521] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [222.995146] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [222.996284] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [222.996685] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [222.998875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [223.004578] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.029058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.034114] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.034608] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.034723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.035185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [223.035649] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [223.036849] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [223.037545] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [223.038499] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [223.038516] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [223.038684] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [223.038848] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [223.039010] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [223.044572] EDID block 0 is all zeroes

<7> [223.044578] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [223.044586] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044590] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044595] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044598] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044601] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044604] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044607] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044609] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.044621] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [223.044789] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [223.045592] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.045759] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [223.046432] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [223.046623] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [223.046805] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [223.047394] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.047642] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.048509] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [223.048544] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.049521] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [223.052143] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.076459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.080865] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.081347] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.081459] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.082407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.082536] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [223.083110] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.083563] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.083569] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.083708] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [223.096618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.096623] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [223.096741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.096891] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.097723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [223.097747] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.098687] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [223.101163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.125459] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.130851] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.131336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.131473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.146155] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [223.146163] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [223.146762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.146902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [223.147221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.147646] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [223.147661] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.147836] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.148720] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [223.149135] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.150116] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [223.152890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.177261] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.183279] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.183811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.183966] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.184491] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.184778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.185189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [223.185615] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.186690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [223.189449] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.213854] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.222044] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.222748] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.222999] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.224228] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.224547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [223.225327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.225961] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.225973] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.226289] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [223.241423] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.241436] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [223.241741] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.242145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.243191] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [223.243599] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.245284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [223.248191] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.272631] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.277649] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.278171] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.278350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.278807] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [223.279275] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [223.280457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [223.281114] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [223.282090] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [223.282107] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [223.282298] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [223.282509] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [223.282678] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [223.288216] EDID block 0 is all zeroes

<7> [223.288221] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [223.288229] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288233] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288236] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288238] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288241] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288244] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288247] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288250] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.288262] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [223.288434] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [223.289267] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.289478] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [223.290143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [223.290378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [223.290568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [223.291156] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.291411] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.292283] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [223.292321] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.293304] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [223.296081] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.320373] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.324885] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.325362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.325475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.326423] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.326551] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [223.327134] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.327576] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.327581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.327696] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [223.340567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.340573] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [223.340691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.340839] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.341693] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [223.341717] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.342628] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [223.345367] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.369709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.374721] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.375197] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.375338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.390102] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [223.390110] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [223.390730] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.390872] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [223.391194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.391615] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [223.391629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.391804] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.392651] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [223.392683] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.393623] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [223.396396] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.420757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.425765] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.426314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.426509] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.426996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.427256] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.427955] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [223.427992] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.428996] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [223.431864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.456295] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.465061] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.465828] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.466176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.467634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.468067] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [223.468980] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.469667] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.469682] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.470050] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [223.486574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.486591] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [223.486972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.487482] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.488634] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [223.489033] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.490751] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [223.496108] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.520558] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.526542] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.527041] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.527192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.527690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [223.528158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [223.529339] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [223.529998] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [223.530982] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [223.531003] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [223.531186] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [223.531390] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [223.531553] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [223.537010] EDID block 0 is all zeroes

<7> [223.537017] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [223.537025] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537030] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537035] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537037] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537040] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537043] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537046] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537048] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.537060] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [223.537243] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [223.538105] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.538291] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [223.538975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [223.539183] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [223.539404] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [223.539976] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.540195] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.541072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [223.541104] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.542098] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [223.544863] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.569098] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.574052] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.574580] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.574677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.575288] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.575428] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [223.575978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.576439] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.576444] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.576589] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [223.589489] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.589494] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [223.589613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.589762] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.590594] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [223.590619] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.591549] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [223.592979] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.617336] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.622350] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.622818] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.622933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.637821] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [223.637828] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [223.638445] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.638592] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [223.638911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.639314] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [223.639329] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.639536] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.640398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [223.640428] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.641357] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [223.644132] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.668457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.674431] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.674939] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.675078] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.675575] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.675831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.676223] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [223.676265] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.677271] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [223.680121] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.704518] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.713115] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.713734] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.713916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.714999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.715273] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [223.716043] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.716622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.716634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.716927] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [223.732028] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.732041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [223.732382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.732779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.733760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [223.734186] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.735716] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [223.740808] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.765262] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.771278] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.771775] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.771895] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.772367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [223.772851] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [223.774060] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [223.774733] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [223.775715] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [223.775733] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [223.775907] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [223.776075] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [223.776260] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [223.781809] EDID block 0 is all zeroes

<7> [223.781815] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [223.781822] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781826] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781829] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781832] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781834] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781837] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781840] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781843] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.781855] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [223.782028] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [223.782865] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [223.783036] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [223.783699] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [223.783896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [223.784085] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [223.784691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.784907] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.785777] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [223.785816] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.786833] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [223.789177] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.813456] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.817915] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.818393] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.818505] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.819460] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.819588] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [223.820171] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [223.820613] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.820618] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.820734] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [223.833636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [223.833641] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [223.833760] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.833908] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.834745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [223.834771] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.835704] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [223.838453] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.862797] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.868323] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.868836] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.868926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.883806] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [223.883813] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [223.884434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.884570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [223.885142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [223.885575] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [223.885593] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.885774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.886611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [223.886638] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.887581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [223.890344] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.914699] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.920669] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.921178] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.921338] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.921816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.922034] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.922501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [223.922865] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.923905] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [223.926494] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [223.950887] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [223.960839] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [223.961662] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [223.961932] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [223.963240] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.963653] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [223.964521] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [223.965297] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.965319] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [223.965779] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [223.982373] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [223.982390] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [223.982776] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [223.983348] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [223.984498] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [223.984895] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [223.986171] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [223.991763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.016200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.022230] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.022714] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.022830] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.023294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [224.023759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [224.024958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.025639] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [224.026614] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [224.026634] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [224.026804] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [224.026968] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [224.027143] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [224.032608] EDID block 0 is all zeroes

<7> [224.032614] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [224.032622] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032626] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032631] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032635] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032637] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032640] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032643] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032646] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.032657] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [224.032823] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [224.033619] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.033784] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [224.034412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [224.034605] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [224.034787] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [224.035371] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.035579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.036445] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [224.036477] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.037438] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [224.040152] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.064476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.068847] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.069328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.069426] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.070379] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.070499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [224.071048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.071499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.071504] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.071618] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [224.084525] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.084530] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [224.084649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.084797] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.085635] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [224.085660] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.086576] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [224.089332] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.113692] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.118209] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.118678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.118783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.133612] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [224.133620] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [224.134559] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.134690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [224.135269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.135696] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [224.135709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.135870] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.136706] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [224.136731] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.137660] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [224.140371] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.164723] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.169416] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.169901] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.170025] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.170499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.170730] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.171109] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [224.171158] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.172077] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [224.174911] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.199298] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.209038] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.209707] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.209924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.211099] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.211509] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [224.212397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.213034] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.213048] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.213470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [224.229991] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.230007] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [224.230471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.230964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.232004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [224.232440] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.234086] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [224.239774] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.264270] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.270223] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.270713] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.270829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.271294] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [224.271759] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [224.272943] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.273605] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [224.274539] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [224.274559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [224.274729] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [224.274893] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [224.275053] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [224.280605] EDID block 0 is all zeroes

<7> [224.280610] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [224.280618] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280621] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280624] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280627] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280629] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280632] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280635] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280638] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.280649] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [224.280816] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [224.281666] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.281833] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [224.282501] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [224.282695] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [224.282879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [224.283463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.283712] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.284577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [224.284613] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.285610] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [224.288388] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.312698] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.318166] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.318645] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.318729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.319644] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.319761] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [224.320319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.320761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.320766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.320879] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [224.333781] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.333786] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [224.333904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.334053] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.334890] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [224.334915] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.335850] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [224.338478] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.362834] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.367779] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.368278] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.368375] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.383099] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [224.383106] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [224.383725] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.383856] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [224.384431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.384870] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [224.384883] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.385043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.385879] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [224.385904] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.386851] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [224.389484] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.413844] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.419741] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.420229] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.420366] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.420812] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.421007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.421384] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [224.421422] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.422389] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [224.425174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<7> [224.449553] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.458136] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.458728] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.458909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.460019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.460302] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [224.461209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.461849] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.461861] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.462185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [224.477303] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.477308] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [224.477430] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.477579] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device

<7> [224.478421] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [224.478454] i915 0000:00:02.0: [drm:intel_gt_runtime_suspend [i915]] GT0: GUC: communication disabled

<7> [224.479363] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [224.480843] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended

<6> [224.482575] [IGT] i915_pm_rpm: finished subtest module-reload, FAIL

<6> [224.482884] [IGT] i915_pm_rpm: exiting, ret=98

<7> [224.505072] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device

<7> [224.510147] i915 0000:00:02.0: [drm:guc_enable_communication [i915]] GT0: GUC: communication enabled

<7> [224.510616] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed

<7> [224.510766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.510909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [224.511235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [224.511643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [224.511910] i915 0000:00:02.0: [drm:i915_audio_component_get_power [i915]] restored AUD_FREQ_CNTRL to 0x10

<7> [224.512499] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.513097] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [224.513952] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [224.513965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [224.514085] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [224.514216] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [224.514362] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [224.519383] EDID block 0 is all zeroes

<7> [224.519387] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [224.519393] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519395] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519397] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519399] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519401] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519403] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519405] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519407] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.519416] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [224.519536] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [224.520252] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.520397] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [224.520938] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [224.520964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [224.521326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.521443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [224.521762] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.521892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.521896] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.522009] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [224.524369] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2

<7> [224.524612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [224.524764] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [224.524906] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [224.525448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.525453] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [224.525608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.525907] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] Same epoch counter 1

<7> [224.525924] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [224.526049] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.540890] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [224.540897] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [224.541513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.541635] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [224.542194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.542635] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [224.542647] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.542787] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] Same epoch counter 1

<7> [224.542802] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [224.542926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.543320] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.543496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:108:DP-1] Same epoch counter 1

<7> [224.543511] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [224.543635] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.544547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.544687] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [224.545246] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.545687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.545692] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.545805] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [224.558749] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.558757] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [224.558881] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.559022] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] Same epoch counter 1

<7> [224.559037] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [224.559174] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.559591] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [224.560054] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [224.561162] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.561754] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [224.562585] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [224.562597] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [224.562716] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [224.562833] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [224.562948] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [224.567948] EDID block 0 is all zeroes

<7> [224.567951] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [224.567956] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567958] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567960] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567962] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567964] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567966] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567968] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567970] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.567978] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [224.568097] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [224.568824] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.568944] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [224.569490] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off

<7> [224.569627] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6

<7> [224.569758] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02

<7> [224.570290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on

<7> [224.570441] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:119:DP-2] Same epoch counter 1

<7> [224.704807] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:104:HDMI-A-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [224.705223] i915 0000:00:02.0: [drm:intel_hdmi_compute_clock [i915]] picking 8 bpc for HDMI output (pipe bpp: 24)

<7> [224.705531] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:51:pipe A] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [224.705902] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CONNECTOR:119:DP-2] Limiting display bpp to 24 (EDID bpp 0, max requested bpp 36, max platform bpp 36)

<7> [224.706277] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 25175KHz

<7> [224.706616] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP lane count 1 clock 162000 bpp 24

<7> [224.706919] i915 0000:00:02.0: [drm:intel_dp_compute_link_config [i915]] DP link rate required 75525 available 162000

<7> [224.707246] i915 0000:00:02.0: [drm:intel_dp_compute_config [i915]] [CONNECTOR:119:DP-2] SDP split enable: no

<7> [224.707579] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] [CRTC:72:pipe B] hw max bpp: 24, pipe bpp: 24, dithering: 0

<7> [224.707916] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:103:DDI C/PHY C] [CRTC:51:pipe A]

<7> [224.708283] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [224.708648] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.active (expected 0, found 1)

<7> [224.708983] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [224.709351] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [224.709711] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)

<7> [224.710045] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [224.710407] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)

<7> [224.710764] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2080)

<7> [224.711096] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)

<7> [224.711470] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2080)

<7> [224.711826] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 1968)

<7> [224.712194] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2000)

<7> [224.712547] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1200)

<7> [224.712879] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1235)

<7> [224.713271] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1200)

<7> [224.713633] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1235)

<7> [224.713966] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1203)

<7> [224.714327] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1209)

<7> [224.714686] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)

<7> [224.715019] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2080)

<7> [224.715385] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)

<7> [224.715666] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2080)

<7> [224.715930] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 1968)

<7> [224.716221] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2000)

<7> [224.716503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1200)

<7> [224.716766] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1235)

<7> [224.717028] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1200)

<7> [224.717560] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1235)

<7> [224.717831] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1203)

<7> [224.718097] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1209)

<7> [224.718387] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [224.718675] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)

<7> [224.718939] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [224.719227] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [224.719509] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 154000)

<7> [224.719772] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 154000)

<7> [224.720032] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:51:pipe A] fastset requirement not met in port_clock (expected 0, found 154000)

<7> [224.720336] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [224.720568] i915 0000:00:02.0: [drm:intel_ddi_compute_config_late [i915]] [ENCODER:118:DDI E/PHY E] [CRTC:72:pipe B]

<7> [224.720768] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.enable (expected 0, found 1)

<7> [224.720987] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.active (expected 0, found 1)

<7> [224.721230] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [224.721465] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in lane_count (expected 0, found 1)

<7> [224.721682] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 3910800/8388608 link 81475/524288)

<7> [224.721902] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)

<7> [224.722118] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [224.722377] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 640)

<7> [224.722613] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 800)

<7> [224.722832] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 640)

<7> [224.723049] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 800)

<7> [224.723288] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 656)

<7> [224.723522] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 752)

<7> [224.723739] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 480)

<7> [224.723956] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 525)

<7> [224.724196] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 480)

<7> [224.724430] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 525)

<7> [224.724646] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 490)

<7> [224.724863] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 492)

<7> [224.725079] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 640)

<7> [224.725324] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 800)

<7> [224.725539] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 640)

<7> [224.725724] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 800)

<7> [224.725908] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 656)

<7> [224.726092] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 752)

<7> [224.726353] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 480)

<7> [224.726543] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 525)

<7> [224.726729] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 480)

<7> [224.726915] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 525)

<7> [224.727100] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 490)

<7> [224.727303] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 492)

<7> [224.727503] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [224.727689] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [224.727874] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [224.728058] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000005)

<7> [224.728264] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 24)

<7> [224.728464] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 25175)

<7> [224.728649] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 25175)

<7> [224.728834] i915 0000:00:02.0: [drm:pipe_config_mismatch [i915]] [CRTC:72:pipe B] fastset requirement not met in port_clock (expected 0, found 162000)

<7> [224.729018] i915 0000:00:02.0: [drm:intel_atomic_check [i915]] fastset requirement not met, forcing full modeset

<7> [224.729280] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:51:pipe A] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (0 - 669), active pipes 0x0 -> 0x3

<7> [224.729527] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [CRTC:72:pipe B] dbuf slices 0x0 -> 0x1, ddb (0 - 0) -> (669 - 892), active pipes 0x0 -> 0x3

<7> [224.729766] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] ddb ( 0 - 0) -> ( 0 - 642), size 0 -> 642

<7> [224.729959] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:47:cursor A] ddb ( 0 - 0) -> ( 642 - 669), size 0 -> 27

<7> [224.730165] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [224.730369] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 2, 3, 3, 5, 6, 7, 8, 0, 0, 0

<7> [224.730522] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 25, 36, 41, 78, 95, 102, 122, 0, 0, 0

<7> [224.730673] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:31:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 26, 37, 42, 79, 96, 103, 123, 0, 0, 0

<7> [224.730824] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] ddb ( 0 - 0) -> ( 669 - 877), size 0 -> 208

<7> [224.730976] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:68:cursor B] ddb ( 0 - 0) -> ( 877 - 892), size 0 -> 15

<7> [224.731187] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm, swm, stwm

<7> [224.731366] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 1, 1, 2, 2, 3, 3, 4, 0, 0, 0

<7> [224.731519] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 7, 8, 9, 14, 18, 19, 22, 0, 0, 0

<7> [224.731671] i915 0000:00:02.0: [drm:skl_compute_wm [i915]] [PLANE:52:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 9, 10, 15, 19, 20, 23, 0, 0, 0

<7> [224.731854] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:31:plane 1A] min cdclk (154000 kHz) > [CRTC:51:pipe A] min cdclk (0 kHz)

<7> [224.732017] i915 0000:00:02.0: [drm:intel_plane_calc_min_cdclk [i915]] [PLANE:52:plane 1B] min cdclk (25175 kHz) > [CRTC:72:pipe B] min cdclk (0 kHz)

<7> [224.732196] i915 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [i915]] new bandwidth min cdclk (19250 kHz) > old min cdclk (0 kHz)

<7> [224.732361] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz

<7> [224.732523] i915 0000:00:02.0: [drm:intel_modeset_calc_cdclk [i915]] New voltage level calculated to be logical 0, actual 0

<7> [224.732729] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:51:pipe A] allocated DPLL 1

<7> [224.732913] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:51:pipe A] reserving DPLL 1

<7> [224.733107] i915 0000:00:02.0: [drm:intel_find_shared_dpll [i915]] [CRTC:72:pipe B] allocated DPLL 2

<7> [224.733285] i915 0000:00:02.0: [drm:intel_reference_shared_dpll_crtc.isra.0 [i915]] [CRTC:72:pipe B] reserving DPLL 2

<7> [224.733456] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:51:pipe A] enable: yes [modeset]

<7> [224.733623] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [224.733786] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0

<7> [224.733947] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [224.734107] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [224.734322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [224.734512] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [224.734673] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [224.734840] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [224.735005] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [224.735194] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [224.735370] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [224.735517] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [224.735699] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9

<7> [224.735867] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=154000, hd=1920 hb=1920-2080 hs=1968-2000 ht=2080, vd=1200 vb=1200-1235 vs=1203-1209 vt=1235, flags=0x9

<7> [224.736011] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 154000, pipe src: 1920x1200+0+0, pixel rate 154000

<7> [224.736168] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 109, ips linetime: 0

<7> [224.736322] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [224.736465] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [224.736607] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [224.736749] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80000181, cfgcr2: 0x3a4

<7> [224.736890] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [224.737067] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [224.737253] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [224.737426] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.737569] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.737711] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.737867] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [224.738010] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:31:plane 1A] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [224.738170] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [224.738313] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 1920.000000x1200.000000+0.000000+0.000000 dst: 1920x1200+0+0

<7> [224.738467] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:39:plane 2A] fb: [NOFB], visible: no

<7> [224.738651] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:47:cursor A] fb: [NOFB], visible: no

<7> [224.738803] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [CRTC:72:pipe B] enable: yes [modeset]

<7> [224.738945] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [224.739092] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0

<7> [224.739254] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] MST master transcoder: <invalid>

<7> [224.739396] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [224.739538] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] bigjoiner: no, pipes: 0x0

<7> [224.739680] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] splitter: disabled, link count 0, overlap 0

<7> [224.739859] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m_n: lanes: 1; data_m: 3910800, data_n: 8388608, link_m: 81475, link_n: 524288, tu: 64

<7> [224.740026] i915 0000:00:02.0: [drm:intel_dump_m_n_config.isra.0 [i915]] dp m2_n2: lanes: 1; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [224.740195] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] framestart delay: 1, MSA timing delay: 0

<7> [224.740343] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] audio: 0, infoframes: 0, infoframes enabled: 0x0

<7> [224.740490] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] vrr: no, vmin: 0, vmax: 0, pipeline full: 0, guardband: 0 flipline: 0, vmin vblank: -1, vmax vblank: -2

<7> [224.740618] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] requested mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [224.740747] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] adjusted mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [224.740875] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [224.741004] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pipe mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [224.741182] i915 0000:00:02.0: [drm:intel_dump_crtc_timings [i915]] crtc timings: clock=25175, hd=640 hb=640-800 hs=656-752 ht=800, vd=480 vb=480-525 vs=490-492 vt=525, flags=0xa

<7> [224.741326] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] port clock: 162000, pipe src: 640x480+0+0, pixel rate 25175

<7> [224.741481] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] linetime: 255, ips linetime: 0

<7> [224.741610] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [224.741737] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [224.741880] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] ips: 0, double wide: 0, drrs: 0

<7> [224.742007] i915 0000:00:02.0: [drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x5, cfgcr1: 0x0, cfgcr2: 0x0

<7> [224.742146] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] csc_mode: 0x2 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [224.742275] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [224.742405] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [224.742565] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.742715] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.742843] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [224.742971] i915 0000:00:02.0: [drm:ilk_dump_csc [i915]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [224.743105] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:52:plane 1B] fb: [FB:123] 1920x1200 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [224.743248] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [224.743376] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] src: 640.000000x480.000000+0.000000+0.000000 dst: 640x480+0+0

<7> [224.743505] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:60:plane 2B] fb: [NOFB], visible: no

<7> [224.743632] i915 0000:00:02.0: [drm:intel_crtc_state_dump [i915]] [PLANE:68:cursor B] fb: [NOFB], visible: no

<7> [224.744384] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on

<7> [224.744533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off

<7> [224.744961] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00

<7> [224.745564] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2

<7> [224.745825] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:94:DDI B/PHY B]

<7> [224.745951] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:103:DDI C/PHY C]

<7> [224.746081] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:107:DDI D/PHY D]

<7> [224.746216] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:109:DP-MST A]

<7> [224.746338] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:110:DP-MST B]

<7> [224.746459] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:111:DP-MST C]

<7> [224.746596] i915 0000:00:02.0: [drm:intel_modeset_verify_disabled [i915]] [ENCODER:118:DDI E/PHY E]

<7> [224.746749] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 0

<7> [224.746943] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [224.747077] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [224.747232] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 3

<7> [224.747365] i915 0000:00:02.0: [drm:skl_sagv_disable [i915]] Disabling SAGV

<7> [224.747512] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 1 (active 0x1, on? 0) for [CRTC:51:pipe A]

<7> [224.747644] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 1

<7> [224.748201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_C

<7> [224.748374] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe A

<7> [224.750036] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enable DPLL 2 (active 0x2, on? 0) for [CRTC:72:pipe B]

<7> [224.750180] i915 0000:00:02.0: [drm:intel_enable_shared_dpll [i915]] enabling DPLL 2

<7> [224.750410] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DDI_IO_A_E

<7> [224.750565] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [224.751640] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.752668] i915 0000:00:02.0: [drm:intel_dp_start_link_train [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using LINK_BW_SET value 06

<7> [224.753234] i915 0000:00:02.0: [drm:intel_dp_set_signal_levels [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] 8b/10b, lanes: 1, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [224.753365] i915 0000:00:02.0: [drm:hsw_set_signal_levels [i915]] Using signal levels 00000000

<7> [224.753486] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS1

<7> [224.754642] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Clock recovery OK

<7> [224.754768] i915 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Using DP training pattern TPS2

<7> [224.756509] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Channel EQ done. DP Training successful

<7> [224.756629] i915 0000:00:02.0: [drm:intel_dp_link_train_phy [i915]] [CONNECTOR:119:DP-2][ENCODER:118:DDI E/PHY E][DPRX] Link Training passed at link rate = 162000, lane count = 1

<7> [224.757322] i915 0000:00:02.0: [drm:intel_enable_transcoder [i915]] enabling pipe B

<7> [224.774383] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [224.774557] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:51:pipe A]

<7> [224.774913] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 1

<7> [224.775115] i915 0000:00:02.0: [drm:verify_connector_state [i915]] [CONNECTOR:119:DP-2]

<7> [224.775297] i915 0000:00:02.0: [drm:intel_modeset_verify_crtc [i915]] [CRTC:72:pipe B]

<7> [224.775548] i915 0000:00:02.0: [drm:verify_single_dpll_state.isra.0 [i915]] DPLL 2

<7> [224.775848] i915 0000:00:02.0: [drm:drm_fb_helper_hotplug_event.part.0 [drm_kms_helper]]

<7> [224.775872] [drm:drm_client_modeset_probe]

<7> [224.776157] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1]

<7> [224.776199] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:95:HDMI-A-1]

<7> [224.776775] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.776902] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry

<7> [224.777287] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)

<7> [224.777420] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.777425] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.777537] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1

<7> [224.780351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb

<7> [224.780355] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0

<7> [224.780611] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:HDMI-A-1] disconnected

<7> [224.780626] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2]

<7> [224.780639] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:104:HDMI-A-2]

<7> [224.793741] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD monitor Dummy #4B

<7> [224.793747] i915 0000:00:02.0: [drm:update_display_info] [CONNECTOR:104:HDMI-A-2] ELD size 32, SAD count 0

<7> [224.793973] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.794095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry

<7> [224.794399] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)

<7> [224.794530] i915 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [224.794763] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:HDMI-A-2] probed modes :

<7> [224.794780] [drm:drm_mode_debug_printmodeline] Modeline "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9

<7> [224.794785] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140000 1920 2068 2100 2101 1080 1082 1087 1115 0x40 0x9

<7> [224.794789] [drm:drm_mode_debug_printmodeline] Modeline "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9

<7> [224.794792] [drm:drm_mode_debug_printmodeline] Modeline "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5

<7> [224.794796] [drm:drm_mode_debug_printmodeline] Modeline "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5

<7> [224.794799] [drm:drm_mode_debug_printmodeline] Modeline "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9

<7> [224.794803] [drm:drm_mode_debug_printmodeline] Modeline "1280x960": 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5

<7> [224.794806] [drm:drm_mode_debug_printmodeline] Modeline "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9

<7> [224.794809] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [224.794813] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [224.794816] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [224.794819] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa

<7> [224.794824] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1]

<7> [224.794837] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:108:DP-1]

<7> [224.795023] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:108:DP-1] disconnected

<7> [224.795036] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3]

<7> [224.795048] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:115:HDMI-A-3]

<7> [224.795385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.795499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK on first message, retry

<7> [224.795795] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpd] NAK for addr: 0050 w(1)

<7> [224.795925] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.795929] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [224.796042] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpd. force bit now 1

<7> [224.798857] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd

<7> [224.798861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpd. force bit now 0

<7> [224.798980] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:115:HDMI-A-3] disconnected

<7> [224.798993] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2]

<7> [224.799006] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:119:DP-2]

<7> [224.799913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI E/PHY E: DPCD: 11 0a 82 01 00 03 01 01 02 00 00 00 00 00 00

<7> [224.800520] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX A/DDI E/PHY E: DP branch: OUI 00-00-00 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000

<7> [224.801360] i915 0000:00:02.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX A/DDI E/PHY E: DPCD DFP: 09

<7> [224.801372] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [ENCODER:118:DDI E/PHY E] MST support: port: no, sink: no, modparam: yes

<7> [224.801495] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000

<7> [224.801611] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000

<7> [224.801726] i915 0000:00:02.0: [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000

<5> [224.807238] EDID block 0 is all zeroes

<7> [224.807242] i915 0000:00:02.0: [drm:connector_bad_edid] [CONNECTOR:119:DP-2] EDID is invalid:

<7> [224.807249] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807251] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807253] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807255] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807257] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807259] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807261] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807263] [00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.807271] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] VRR capable: no

<7> [224.807390] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] DFP max bpc 8, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [224.808091] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [224.808224] i915 0000:00:02.0: [drm:intel_dp_set_edid [i915]] [CONNECTOR:119:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [224.808851] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:119:DP-2] probed modes :

<7> [224.808866] [drm:drm_mode_debug_printmodeline] Modeline "640x480": 60 25175 640 656 752 800 480 490 492 525 0x48 0xa

<7> [224.808870] [drm:drm_mode_debug_printmodeline] Modeline "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa

<7> [224.808874] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5

<7> [224.808878] [drm:drm_mode_debug_printmodeline] Modeline "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5

<7> [224.808881] [drm:drm_mode_debug_printmodeline] Modeline "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5

<7> [224.808885] [drm:drm_client_modeset_probe] connector 95 enabled? no

<7> [224.808888] [drm:drm_client_modeset_probe] connector 104 enabled? yes

<7> [224.808890] [drm:drm_client_modeset_probe] connector 108 enabled? no

<7> [224.808892] [drm:drm_client_modeset_probe] connector 115 enabled? no

<7> [224.808894] [drm:drm_client_modeset_probe] connector 119 enabled? yes

<7> [224.808992] [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [224.809006] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 104

<7> [224.809010] [drm:drm_client_modeset_probe] looking for preferred mode on connector 104 0

<7> [224.809012] [drm:drm_client_modeset_probe] found mode 1920x1200

<7> [224.809014] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 119

<7> [224.809016] [drm:drm_client_modeset_probe] looking for preferred mode on connector 119 0

<7> [224.809018] [drm:drm_client_modeset_probe] found mode 640x480

<7> [224.809021] [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config

<7> [224.809076] [drm:drm_client_modeset_probe] desired mode 1920x1200 set on crtc 51 (0,0)

<7> [224.809148] [drm:drm_client_modeset_probe] desired mode 640x480 set on crtc 72 (0,0)

Results for igt@i915_pm_rpm@module-reload