Results for igt@i915_pm_rpm@module-reload

Result: Skip

git-log-oneline igt_runner0 run0 runtimes0 results0.json boot0 dmesg0

Detail	Value
Igt-Version	IGT-Version: 1.27.1-gfaa966f69 (x86_64) (Linux: 6.5.0-rc2-linus-v6.5-rc2-gfdf0eaf11452+ x86_64)
Out	Opened device: /dev/dri/card0 Runtime PM support: 1 PC8 residency support: 0 DMC: fw loaded: yes i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 0 PCI device power state: D0 [0] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_atomic_commit+0x25/0x400 [i915] drm_atomic_commit+0x95/0xc0 drm_atomic_helper_set_config+0x77/0xc0 [drm_kms_helper] drm_mode_setcrtc+0x1ec/0x740 drm_ioctl_kernel+0xb6/0x150 drm_ioctl+0x21d/0x420 __x64_sys_ioctl+0x7c/0xb0 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 0 i915_runtime_pm_status: Runtime power status: enabled GPU idle: yes IRQs disabled: yes Usage count: 1 PCI device power state: D3hot [3] Wakeref last acquired: track_intel_runtime_pm_wakeref+0x18/0xc0 [i915] intel_display_power_get+0x24/0x70 [i915] intel_hdmi_detect+0x88/0x160 [i915] drm_helper_probe_detect_ctx+0x8c/0x100 [drm_kms_helper] check_connector_changed+0x47/0x1b0 [drm_kms_helper] drm_helper_hpd_irq_event+0x96/0x110 [drm_kms_helper] i915_hpd_poll_init_work+0xaf/0xf0 [i915] process_one_work+0x251/0x500 Wakeref last released: __untrack_all_wakerefs+0x6f/0x80 [i915] untrack_all_intel_runtime_pm_wakerefs+0x42/0x80 [i915] intel_runtime_suspend+0xe1/0x260 [i915] pci_pm_runtime_suspend+0x5d/0x1a0 __rpm_callback+0x3f/0x110 rpm_callback+0x58/0x70 rpm_suspend+0x118/0x5f0 pm_runtime_work+0x9f/0xb0 Wakeref count: 0 Test requirement not met in function __igt_unique____real_main2421, file ../../../usr/src/igt-gpu-tools/tests/i915/i915_pm_rpm.c:2432: Test requirement: setup_environment(true) Subtest module-reload: SKIP (0.000s)
Err	(i915_pm_rpm:5364) igt_pm-WARNING: timeout: pm_status expected:suspended, got:suspending Subtest module-reload: SKIP (0.000s)
Dmesg	<6> [170.993773] [IGT] i915_pm_rpm: executing <7> [170.998128] i915 0000:00:02.0: [drm:i915_gem_open [i915]] <7> [170.998788] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [170.998807] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [170.999086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [170.999268] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [170.999395] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.000048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.000358] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [171.000461] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [171.000472] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.000691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.001167] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.001697] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.002241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.003760] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.004783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.005539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.005768] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.005898] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.006024] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.007412] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.007559] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [171.007608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [171.007620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.007738] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.009051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.009181] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.010044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.010527] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.010532] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.010682] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.035822] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.035827] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.035952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.036081] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.039565] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [171.039581] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.039711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.040170] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.040302] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [171.040805] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [171.040819] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.040942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.041403] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.041934] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.042489] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.043663] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.044749] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.045541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.045703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.045832] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.045957] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.046544] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.046755] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [171.047162] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [171.047175] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.047293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.048382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.048507] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.049176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.049695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.049701] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.049859] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.076085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.076089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.076199] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.076327] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [171.076739] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] <7> [171.076753] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [171.076873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.077333] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.077549] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:95:DP-1] disconnected <7> [171.077588] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] <7> [171.077620] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [171.077809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.078266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [171.078793] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [171.079356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [171.080460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [171.081456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [171.082249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [171.082398] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [171.082558] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [171.082756] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [171.083345] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.083502] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:107:DP-2] disconnected <7> [171.083551] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] <7> [171.083568] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [171.083709] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [171.084858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.084993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [171.085750] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [171.086259] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.086263] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [171.086371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [171.111032] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [171.111036] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [171.111145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [171.111273] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] disconnected <7> [182.156860] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.161109] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.185678] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.192269] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.192841] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.193283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.193697] [drm:drm_mode_setcrtc] [CRTC:51:pipe A] <7> [182.194391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.194954] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.195257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.195536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.196179] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.196827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.197116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.197362] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.198118] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.198561] [drm:drm_mode_setcrtc] [CRTC:72:pipe B] <7> [182.198743] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.199140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.199751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.200332] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.200573] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.200849] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.201540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.201846] [drm:drm_mode_setcrtc] [CRTC:93:pipe C] <7> [182.201864] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.201882] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.205405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.229790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.235896] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.236051] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.236599] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.237096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.237690] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.239224] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.240170] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.240946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.241226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.241371] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.241524] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.242117] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.242279] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.242299] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.242443] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.243709] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.243839] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.244546] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.245037] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.245043] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.245163] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.269779] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.269784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.269897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.270187] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.271199] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.271247] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.273788] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.298167] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.303361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.303496] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.303957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.304128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.304148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.304291] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.304770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.305269] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.305863] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.307166] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.307964] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.308735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.308896] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.309028] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.309158] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.309766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.309908] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.309931] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.313363] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.337751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.343084] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.343445] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.343651] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.344160] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.344752] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.344966] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.345127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.345750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.345910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.347064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.348416] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.372684] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.377536] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.377711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.378907] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.379100] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.379877] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.380405] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.380412] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.380611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.405224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.405229] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.405340] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.405527] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.406547] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.406588] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.408001] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.432392] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.437205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.437317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.437807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.437964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.437984] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.438119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.438616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.439124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.439702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.440953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.442037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.442815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.442970] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.443107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.443239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.443848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.443994] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.444010] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.444134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.445203] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.445320] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.446014] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.446537] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.446542] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.446655] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.470720] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.470724] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.470834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.470971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.471990] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.472026] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.474696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.499061] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.503846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.503968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.504474] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.504665] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.504685] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.504842] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.505342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.505872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.506452] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.507618] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.508734] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.509453] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.509617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.509747] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.509873] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.510485] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.510637] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.510652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.510771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.511898] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.512012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.512937] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.513474] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.513479] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.513602] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.539244] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.539249] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.539360] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.539575] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.540595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.540633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.542006] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.566391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.571188] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.571296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.571809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.571959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.571978] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.572107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.572618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.573105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.573663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.574785] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.575874] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.576632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.576815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.576946] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.577071] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.577688] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.577843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.577859] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.577980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.579054] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.579168] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.579833] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.580345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.580350] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.580471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.605589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.605595] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.605721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.605859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.607349] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.607385] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.608793] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.633196] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.638023] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.638131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.638625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.638804] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.638827] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.638963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.639442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.639942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.640537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.641696] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.642794] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.643577] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.643732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.643865] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.643994] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.644597] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.644737] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.644753] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.644873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.645970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.646096] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.646793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.647285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.647290] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.647419] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.672100] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.672105] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.672215] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.672354] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.673371] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.673410] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.674848] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.699246] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.704046] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.704163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.704664] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.704848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.704867] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.704986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.705473] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.705973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.706551] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.707682] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.708782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.709541] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.709694] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.709827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.709956] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.710559] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.710700] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.710715] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.710837] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.711931] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.712044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.712732] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.713228] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.713233] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.713344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.737349] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.737354] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.737515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.737732] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.738742] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.738779] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.740127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.764488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.769317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.769442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.769978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.770155] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.770175] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.770303] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.770845] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.771334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.771908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.773157] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.774246] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.774995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.775146] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.775279] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.775408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.776019] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.776160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.776176] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.776298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.777391] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.777514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.777851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.778300] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.778304] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.778414] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.803039] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.803044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.803154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.803291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.804805] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.804902] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.807406] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.831785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.836450] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.836571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.837046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.837195] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.837214] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.837342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.837877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.838380] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.838942] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.840158] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.841247] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.841995] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.842147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.842279] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.842408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.843005] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.843145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.843160] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.843281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.844366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.844490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.845174] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.845703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.845710] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.845823] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.870962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.870967] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.871078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.871215] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.872726] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.872763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.875447] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.899749] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.905070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.905193] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.905704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.905888] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.905907] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.906055] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.906525] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.907032] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.907626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.908888] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.909947] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.910710] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.910863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.910995] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.911124] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.911729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.911869] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.911885] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.912005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.913080] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.913194] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.913871] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.914348] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.914353] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.914485] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [182.938019] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.938024] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [182.938134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.938271] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [182.939760] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [182.939799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [182.941126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [182.965523] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [182.970337] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [182.970462] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.970938] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.971087] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [182.971106] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [182.971262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.971779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [182.972248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [182.972818] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [182.974007] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [182.975094] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [182.975828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [182.975980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [182.976113] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [182.976242] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [182.976851] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [182.977061] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [182.977076] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [182.977195] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [182.978319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.978453] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [182.979169] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [182.979710] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [182.979715] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [182.979837] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.003870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.003875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.003999] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.004137] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.005624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.005722] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.007101] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.031490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.036240] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.036356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.036873] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.037051] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.037071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.037201] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.037684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.038200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.038757] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.039907] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.040793] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.041554] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.041731] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.041874] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.042028] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.042615] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.042786] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.042802] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.042920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.044003] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.044114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.045070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.045631] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.045639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.045762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.070321] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.070326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.070463] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.070639] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.071628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.071668] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.073141] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.097510] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.102317] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.102442] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.102955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.103105] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.103124] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.103254] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.103766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.104252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.104810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.105955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.107037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.107824] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.107977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.108110] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.108239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.108831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.108971] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.108986] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.109108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.110162] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.110275] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.110961] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.111448] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.111453] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.111564] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.137245] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.137250] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.137359] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.137573] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.138596] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.138633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.140004] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.164379] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.169292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.169398] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.169941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.170133] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.170153] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.170282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.170770] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.171281] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.171859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.173148] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.174241] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.174994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.175147] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.175280] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.175409] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.176016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.176155] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.176171] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.176292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.177367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.177499] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.178156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.178724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.178730] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.178840] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.203994] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.203999] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.204111] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.204249] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.205740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.205782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.208442] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.232817] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.237489] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.237609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.238084] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.238233] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.238253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.238381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.238914] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.239411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.239987] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.241123] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.242166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.242795] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.242949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.243082] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.243212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.243807] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.243951] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.243967] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.244089] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.245164] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.245278] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.245986] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.246478] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.246483] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.246594] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.272268] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.272272] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.272382] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.272598] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.273658] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.273721] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.275124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.299491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.304810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.304951] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.305481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.305681] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.305712] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.305859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.306320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.306850] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.307409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.308456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.309454] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.310211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.310363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.310514] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.310644] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.311237] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.311376] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.311392] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.311522] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.312608] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.312723] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.313397] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.313905] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.313910] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.314021] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.337510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.337515] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.337639] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.337777] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.339254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.339288] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.341749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.366119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.371380] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.371559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.372033] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.372168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.372186] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.372302] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.372805] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.373287] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.373881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.375041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.375831] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.376592] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.376753] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.376882] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.377008] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.377595] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.377757] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.377772] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.377893] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.379000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.379113] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.379788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.380291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.380296] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.380407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.406627] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.406632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.406757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.406895] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.408398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.408510] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.410803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.435194] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.441119] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.441247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.441747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.441932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.441951] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.442070] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.442556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.443058] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.443616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.444761] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.445786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.446545] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.446707] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.446844] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.446972] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.447576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.447725] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.447741] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.447859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.448971] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.449082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.449803] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.450298] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.450303] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.450412] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.475026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.475031] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.475142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.475280] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.476839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.476899] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.478283] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.502661] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.506481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.506619] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.507080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.507216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.507234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.507350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.507888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.508368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.508949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.510198] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.511319] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.512092] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.512245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.512378] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.512552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.513179] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.513319] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.513335] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.513476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.514570] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.514690] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.515377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.515879] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.515886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.516006] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.540559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.540563] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.540685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.540822] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.542313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.542349] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.544748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.569085] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.573846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.573969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.574481] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.574671] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.574690] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.574810] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.575301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.575816] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.576388] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.577462] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.578465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.579226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.579380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.579533] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.579669] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.580263] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.580402] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.580418] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.580555] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.581651] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.581772] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.582466] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.582959] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.582964] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.583086] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.607661] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.607666] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.607788] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.607926] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.609416] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.609519] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.610899] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.635238] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.639413] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.639528] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.639991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.640130] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.640148] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.640267] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.640748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.641245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.641865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.642999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.644093] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.644836] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.644989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.645123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.645252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.645861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.646009] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.646025] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.646147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.647219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.647344] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.648048] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.648574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.648581] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.648702] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.674376] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.674381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.674548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.674728] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.676309] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.676334] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.678753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.703082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.708331] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.708461] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.708936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.709085] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.709104] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.709233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.709724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.710232] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.710834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.711956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.713039] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.713822] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.713974] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.714106] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.714236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.714833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.714981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.714997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.715119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.716182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.716297] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.717011] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.717510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.717517] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.717638] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.742773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.742777] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.742887] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.743024] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.744510] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.744548] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.746010] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.770327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.775691] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.775825] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.776312] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.776512] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.776536] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.776685] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.777147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.777673] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.778236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.779338] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.780445] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.781207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.781361] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.781526] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.781660] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.782250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.782386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.782401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.782535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.783642] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.784238] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.784948] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.785488] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.785495] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.785654] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.811908] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.811913] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.812024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.812163] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.813686] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.813767] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.815131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.839503] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.844350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.844475] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.844950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.845099] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.845119] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.845248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.845761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.846250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.846843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.847960] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.848913] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.849676] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.849829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.849962] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.850091] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.850692] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.850843] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.850858] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.850980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.852040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.852155] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.852858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.853341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.853346] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.853468] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.877484] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.877489] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.877613] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.877750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.879239] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.879304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.881787] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.906161] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.910498] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.910600] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.911063] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.911201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.911220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.911340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.911821] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.912331] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.912923] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.914045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.915158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.915924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.916078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.916212] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.916340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.916946] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.917093] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.917109] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.917230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.918327] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.918452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.919136] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.919662] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.919669] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.919791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [183.943230] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.943234] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [183.943346] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.943529] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [183.945023] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [183.945060] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [183.946466] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [183.970787] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [183.976567] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [183.976700] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.977168] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.977314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [183.977333] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [183.977511] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.977986] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [183.978539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [183.979076] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [183.980200] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [183.981295] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [183.982056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [183.982209] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [183.982343] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [183.982502] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [183.983091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [183.983228] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [183.983243] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [183.983362] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [183.984541] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.984654] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [183.985629] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [183.986131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [183.986136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [183.986243] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.014139] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.014144] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.014255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.014392] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.015978] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.016018] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.017429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.041755] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.048063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.048210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.048716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.048893] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.048912] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.049034] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.049515] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.050022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.050590] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.051687] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.052787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.053395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.053574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.053707] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.053837] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.054419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.054580] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.054600] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.054723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.055818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.055938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.056627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.057119] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.057124] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.057237] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.082404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.082409] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.082531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.082696] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.084189] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.084276] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.086746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.111126] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.116343] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.116474] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.116950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.117126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.117145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.117285] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.117784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.118270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.118860] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.119957] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.121041] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.121828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.121983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.122116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.122245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.122853] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.122998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.123013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.123131] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.124227] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.124369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.125077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.125610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.125617] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.125736] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.153036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.153041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.153152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.153290] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.154782] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.154884] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.156145] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.180482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.185333] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.185457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.185932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.186081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.186100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.186229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.186724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.187218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.187811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.188955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.190043] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.190830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.190983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.191116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.191246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.191852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.192000] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.192015] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.192136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.193229] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.193345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.194040] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.194570] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.194577] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.194698] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.218727] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.218732] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.218855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.218992] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.220013] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.220049] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.221465] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.245782] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.252068] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.252169] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.252672] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.252850] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.252870] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.252990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.253471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.253979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.254548] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.255666] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.256759] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.257464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.257656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.257786] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.257912] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.258505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.258650] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.258665] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.258784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.260370] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.260510] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.261216] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.261759] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.261766] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.261899] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.287064] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.287068] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.287177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.287314] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.288859] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.288910] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.290330] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.314667] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.320063] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.320186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.320680] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.320863] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.320896] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.321029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.321508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.322007] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.322595] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.323710] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.324786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.325551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.325705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.325838] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.325968] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.326574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.326724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.326740] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.326862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.327956] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.328071] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.328758] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.329257] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.329262] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.329374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.351753] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.351758] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.351871] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.352012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.353037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.353073] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.355758] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.380089] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.385328] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.385456] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.385931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.386079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.386099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.386227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.386718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.387214] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.387834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.389135] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.390164] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.390929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.391083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.391216] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.391346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.391950] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.392096] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.392112] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.392233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.393292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.393407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.394116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.394620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.394626] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.394748] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.418807] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.418811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.418921] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.419058] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.421084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.421121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.422464] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.444812] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.449455] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.449557] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.450022] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.450160] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.450181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.450308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.450816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.451312] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.451881] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.453002] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.453955] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.454715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.454867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.455000] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.455130] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.455742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.455892] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.455907] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.456028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.457125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.457239] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.457924] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.458435] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.458442] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.458565] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.484236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.484241] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.484350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.484560] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.486057] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.486095] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.487469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.511793] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.517058] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.517161] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.517665] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.517826] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.517845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.517992] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.518487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.518970] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.519560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.520680] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.521771] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.522534] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.522697] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.522827] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.522952] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.523582] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.523740] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.523756] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.523875] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.524993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.525108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.526051] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.526556] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.526563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.526711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.552339] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.552344] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.552516] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.552693] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.554185] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.554221] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.556429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.580804] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.586075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.586210] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.586729] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.586889] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.586909] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.587029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.587508] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.588021] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.588583] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.589700] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.590787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.591550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.591740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.591869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.591996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.592588] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.592733] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.592748] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.592867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.593929] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.594041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.594753] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.595234] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.595239] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.595348] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.621080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.621085] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.621196] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.621333] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.622839] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.622904] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.624298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.648655] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.653997] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.654100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.654574] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.654723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.654741] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.654861] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.655323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.655852] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.656411] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.657738] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.658786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.659551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.659705] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.659837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.659967] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.660571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.660722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.660738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.660859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.661964] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.662079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.662756] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.663274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.663279] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.663390] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.686366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.686371] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.686539] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.686722] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.687729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.687782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.689129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.713466] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.718847] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.718963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.719477] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.719641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.719659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.719779] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.720241] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.720782] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.721328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.722458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.723466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.724227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.724379] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.724534] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.724671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.725265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.725405] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.725420] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.725560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.726643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.726766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.727455] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.727950] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.727955] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.728066] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.753794] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.753799] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.753909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.754046] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.755056] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.755097] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.756467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.780803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.786557] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.786668] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.787132] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.787327] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.787346] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.787563] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.788063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.788603] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.789152] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.790398] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.791355] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.791987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.792143] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.792277] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.792406] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.793006] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.793153] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.793169] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.793290] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.794389] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.794512] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.795212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.795733] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.795740] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.795861] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.820477] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.820482] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.820606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.820743] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.822258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.822295] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.823812] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.848184] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.852474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.852581] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.853058] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.853201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.853220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.853372] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.853872] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.854386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.854948] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.856167] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.857273] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.858056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.858212] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.858345] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.858486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.859078] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.859216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.859232] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.859354] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.860461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.860587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.861269] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.861799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.861807] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.861943] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.888264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.888269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.888381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.888599] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.889621] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.889681] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.891106] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.915472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.920795] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.920935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.921487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.921640] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.921659] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.921816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.922301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.922826] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.923371] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.924661] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.925762] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.926556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.926709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.926842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.926971] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.927573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.927713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.927729] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.927849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.928949] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.929075] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.929763] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.930264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.930269] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.930393] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [184.956657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.956662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [184.956787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.956925] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [184.958414] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [184.958518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [184.959819] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [184.984186] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [184.989387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [184.989504] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.989969] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.990138] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [184.990157] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [184.990300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.990789] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [184.991288] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [184.991882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [184.993040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [184.993847] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [184.994629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [184.994785] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [184.994919] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [184.995048] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [184.995640] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [184.995779] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [184.995795] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [184.995917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [184.997025] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.997150] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [184.997840] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [184.998341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [184.998345] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [184.998477] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.024747] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.024755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.024933] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.025135] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.026702] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.026742] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.028099] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.052458] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.057224] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.057332] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.057845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.057994] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.058013] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.058148] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.058618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.059136] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.059706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.060954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.062052] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.062834] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.062987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.063121] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.063250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.063855] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.064036] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.064059] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.064185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.065276] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.065392] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.066077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.066607] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.066612] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.066723] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.091846] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.091852] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.091977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.092114] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.093595] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.093631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.095012] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.119346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.124674] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.124784] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.125265] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.125411] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.125459] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.125596] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.126060] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.126610] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.127135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.128249] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.129357] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.130125] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.130281] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.130473] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.130616] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.131210] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.131351] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.131366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.131506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.132574] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.132689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.133369] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.133874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.133881] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.133996] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.158035] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.158040] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.158152] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.158289] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.159314] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.159352] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.160823] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.185210] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.189973] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.190083] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.190573] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.190753] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.190771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.190917] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.191381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.191910] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.192492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.193650] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.194746] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.195457] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.195612] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.195745] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.195874] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.196465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.196606] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.196621] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.196742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.197816] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.197946] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.198643] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.199131] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.199136] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.199283] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.222282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.222287] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.222403] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.222555] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.223599] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.223682] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.225131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.249483] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.254361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.254487] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.254962] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.255111] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.255133] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.255261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.255752] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.256249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.256808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.257954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.259037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.259817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.260007] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.260166] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.260296] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.260888] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.261027] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.261043] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.261164] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.262231] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.262345] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.263038] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.263564] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.263572] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.263683] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.287688] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.287693] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.287817] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.287955] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.288985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.289029] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.290382] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.314704] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.320062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.320181] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.320698] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.320856] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.320874] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.320993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.321480] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.321982] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.322558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.323690] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.324783] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.325551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.325704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.325870] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.326005] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.326621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.326762] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.326777] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.326898] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.328005] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.328118] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.328804] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.329306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.329311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.329440] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.354611] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.354616] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.354740] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.354878] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.356366] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.356400] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.357783] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.382121] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.387378] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.387498] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.387964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.388157] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.388181] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.388328] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.388840] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.389342] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.389929] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.391086] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.392161] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.392975] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.393129] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.393262] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.393391] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.393991] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.394127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.394142] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.394261] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.395384] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.395533] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.396217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.396751] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.396756] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.396915] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.422571] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.422576] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.422701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.422838] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.423865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.423926] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.425313] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.449717] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.455590] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.455742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.456207] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.456399] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.456438] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.456576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.457040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.457564] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.458127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.459243] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.460328] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.461120] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.461277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.461409] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.461549] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.462142] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.462281] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.462296] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.462417] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.463515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.463634] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.464326] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.464827] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.464832] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.464970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.489047] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.489052] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.489164] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.489303] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.490331] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.490373] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.491840] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.516228] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.521546] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.521655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.522122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.522313] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.522336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.522534] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.523028] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.523550] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.524115] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.525334] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.526443] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.527223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.527381] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.527524] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.527653] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.528245] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.528385] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.528401] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.528533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.529619] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.529746] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.530434] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.530936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.530942] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.531060] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.558371] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.558376] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.558526] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.558714] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.559714] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.559775] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.561097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.585496] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.590292] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.590405] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.590922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.591081] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.591101] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.591222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.591688] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.592210] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.592781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.593954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.595052] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.595838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.595994] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.596127] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.596256] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.596849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.597024] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.597040] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.597189] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.598268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.598382] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.599045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.599614] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.599620] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.599738] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.625968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.625973] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.626085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.626222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.627247] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.627286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.629429] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.653759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.659561] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.659671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.660136] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.660330] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.660354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.660560] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.661054] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.661576] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.662141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.663390] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.664462] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.665246] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.665402] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.665545] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.665676] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.666268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.666407] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.666431] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.666553] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.667640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.667766] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.668451] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.668951] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.668957] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.669094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.694231] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.694236] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.694348] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.694515] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.695560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.695647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.697095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.721441] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.726271] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.726381] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.726897] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.727046] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.727066] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.727200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.727666] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.728188] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.728773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.730041] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.731151] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.731918] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.732071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.732204] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.732369] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.732987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.733128] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.733144] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.733266] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.734321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.734442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.735124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.735641] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.735648] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.735766] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.760301] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.760306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.760419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.760626] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.761647] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.761709] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.763129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.787528] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.792345] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.792470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.792948] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.793096] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.793115] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.793234] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.793725] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.794222] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.794782] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.796083] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.796860] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.797621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.797815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.797968] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.798095] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.798684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.798821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.798837] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.798956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.800047] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.800158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.800882] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.801336] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.801341] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.801471] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.824964] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.824969] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.825082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.825220] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.826711] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.826749] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.828094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.852491] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.857319] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.857439] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.857952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.858103] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.858128] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.858250] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.858723] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.859239] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.859824] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.860953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.862052] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.862832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.862985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.863118] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.863248] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.863854] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.864019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.864034] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.864200] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.865283] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.865395] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.866088] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.866628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.866634] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.866755] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.891885] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.891890] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.892002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.892139] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.893151] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.893185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.894433] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.918824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.924165] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.924293] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.924791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.924974] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.924993] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.925136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.925607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.926114] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.926708] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.927864] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.928950] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.929734] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.929890] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.930023] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.930152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.930743] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.930883] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.930898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.931018] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.932095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.932222] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.932911] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.933381] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.933386] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.933543] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [185.957112] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.957117] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [185.957228] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.957366] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [185.958411] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [185.958501] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [185.959859] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [185.983814] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [185.988457] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [185.988576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.989057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.989197] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [185.989216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [185.989346] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.989878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [185.990364] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [185.990940] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [185.992112] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [185.993164] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [185.993806] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [185.993960] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [185.994094] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [185.994223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [185.994815] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [185.994955] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [185.994971] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [185.995093] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [185.996158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.996272] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [185.996993] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [185.997493] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [185.997500] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [185.997611] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.022198] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.022203] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.022313] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.022507] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.023526] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.023608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.026349] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.050730] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.057087] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.057220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.057742] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.057943] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.057962] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.058081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.058565] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.059098] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.059660] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.060906] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.062002] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.062783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.062937] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.063069] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.063198] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.063791] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.063932] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.063947] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.064069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.065142] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.065257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.065962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.066466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.066474] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.066617] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.091250] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.091255] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.091366] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.091584] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.092646] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.092684] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.094128] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.118520] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.123863] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.123980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.124494] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.124675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.124693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.124847] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.125324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.125844] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.126393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.127653] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.128751] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.129454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.129608] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.129741] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.129870] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.130471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.130611] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.130626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.130748] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.131827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.131953] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.132648] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.133149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.133153] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.133280] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.159574] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.159579] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.159691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.159828] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.161318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.161353] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.163803] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.188205] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.192463] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.192566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.193040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.193178] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.193202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.193345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.193912] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.194386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.194959] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.196163] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.197269] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.198053] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.198211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.198344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.198482] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.199074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.199212] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.199228] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.199350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.200435] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.200548] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.201245] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.201756] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.201761] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.201896] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.225965] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.225970] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.226082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.226221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.227713] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.227752] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.229097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.253470] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.258230] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.258343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.258859] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.259031] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.259050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.259173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.259646] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.260154] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.260734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.262005] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.263112] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.263830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.263983] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.264117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.264247] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.264844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.265026] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.265042] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.265190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.266271] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.266385] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.267045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.267597] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.267602] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.267713] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.292893] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.292897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.293020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.293158] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.294188] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.294225] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.295430] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.319806] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.325007] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.325119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.325620] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.325821] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.325840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.325985] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.326482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.326964] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.327559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.328721] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.329782] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.330562] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.330716] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.330849] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.330979] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.331581] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.331721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.331737] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.331858] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.332960] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.333089] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.333783] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.334283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.334288] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.334445] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.360713] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.360718] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.360844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.360982] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.361993] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.362032] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.363418] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.387831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.392525] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.392655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.393133] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.393296] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.393319] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.393457] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.393924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.394458] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.395013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.396279] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.397377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.397992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.398145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.398278] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.398407] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.399016] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.399193] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.399209] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.399357] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.400449] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.400564] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.401225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.401758] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.401763] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.401874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.425921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.425939] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.426051] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.426188] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.427213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.427248] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.429745] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.454145] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.459074] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.459190] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.459690] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.459874] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.459894] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.460013] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.460494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.461001] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.461561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.462673] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.463762] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.464454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.464607] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.464739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.464868] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.465458] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.465597] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.465613] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.465734] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.466778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.466891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.467587] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.468076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.468081] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.468192] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.493302] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.493306] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.493416] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.493622] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.494641] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.494678] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.496097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.520471] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.525329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.525449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.525914] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.526063] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.526083] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.526213] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.526696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.527200] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.527793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.528953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.530037] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.530809] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.530961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.531094] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.531223] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.531827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.531966] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.531982] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.532103] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.533178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.533292] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.533989] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.534497] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.534502] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.534635] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.559246] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.559251] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.559363] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.559571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.560624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.560706] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.562095] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.586481] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.591239] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.591353] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.591867] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.592050] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.592075] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.592197] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.592713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.593195] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.593794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.595064] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.596156] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.596923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.597076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.597210] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.597339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.597980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.598145] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.598161] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.598283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.599356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.599478] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.600163] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.600684] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.600689] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.600800] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.623791] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.623797] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.623922] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.624059] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.625541] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.625577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.626991] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.651387] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.656154] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.656262] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.656746] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.656968] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.656987] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.657107] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.657621] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.658096] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.658681] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.659955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.661053] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.661829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.661982] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.662115] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.662244] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.662850] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.663019] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.663035] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.663186] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.664263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.664377] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.665066] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.665588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.665593] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.665704] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.689789] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.689794] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.689906] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.690043] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.691554] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.691591] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.693004] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.717356] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.722132] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.722240] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.722724] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.722942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.722961] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.723081] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.723592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.724069] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.724637] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.725761] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.726860] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.727626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.727787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.727920] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.728050] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.728655] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.728830] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.728846] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.728993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.730070] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.730185] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.730842] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.731346] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.731351] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.731470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.754957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.754962] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.755087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.755225] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.756744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.756782] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.758094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.782482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.787291] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.787420] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.787940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.788125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.788144] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.788265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.788736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.789243] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.789839] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.790991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.792083] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.792691] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.792843] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.792976] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.793105] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.793747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.793962] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.793978] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.794122] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.794818] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.794930] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.795637] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.796134] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.796139] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.796246] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.821345] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.821350] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.821471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.821685] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.822689] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.822770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.825410] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.849757] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.855004] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.855116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.855614] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.855822] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.855840] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.855984] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.856481] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.856962] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.857559] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.858709] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.859793] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.860571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.860725] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.860858] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.860988] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.861591] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.861731] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.861747] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.861867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.862969] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.863085] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.863788] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.864282] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.864287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.864444] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.889036] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.889041] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.889153] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.889291] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.890318] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.890356] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.891768] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.916164] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.921547] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.921669] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.922130] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.922265] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.922284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.922400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.922933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.923435] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.923990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.925150] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.925949] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.926712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.926879] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.927012] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.927141] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.927756] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.927972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.927992] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.928147] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.929218] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.929333] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.930006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.930530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.930535] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.930646] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [186.957402] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.957407] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [186.957558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.957746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [186.959242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [186.959286] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [186.960778] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [186.985126] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [186.989840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [186.989962] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.990442] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.990627] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [186.990647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [186.990776] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.991248] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [186.991771] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [186.992325] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [186.993631] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [186.994729] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [186.995454] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [186.995606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [186.995738] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [186.995867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [186.996465] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [186.996605] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [186.996620] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [186.996741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [186.997824] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.997938] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [186.998630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [186.999132] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [186.999137] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [186.999247] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.025973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.025977] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.026086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.026222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.027241] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.027284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.029744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.054153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.058487] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.058608] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.059067] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.059202] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.059220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.059336] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.059838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.060321] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.060897] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.062025] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.062840] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.063606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.063766] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.063896] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.064022] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.064609] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.064745] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.064759] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.064877] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.065968] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.066079] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.067263] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.067847] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.067854] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.068014] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.094264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.094268] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.094380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.094588] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.095628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.095667] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.097018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.121399] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.126273] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.126400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.126917] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.127080] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.127100] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.127230] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.127706] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.128217] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.128785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.129956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.131055] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.131703] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.131858] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.131991] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.132119] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.132759] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.132942] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.132964] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.133096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.134234] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.134349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.135044] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.135559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.135564] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.135675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.160263] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.160267] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.160375] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.160537] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.161588] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.161633] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.163031] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.187462] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.192269] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.192397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.192904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.193068] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.193088] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.193217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.193698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.194205] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.194775] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.196089] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.197170] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.197968] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.198123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.198256] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.198386] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.198988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.199125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.199140] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.199259] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.200312] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.200432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.201108] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.201630] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.201652] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.201774] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.226949] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.226966] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.227102] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.227239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.228260] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.228297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.230744] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.255141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.260390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.260543] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.261008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.261147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.261166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.261284] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.261815] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.262322] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.262888] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.264019] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.265131] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.265829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.265984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.266117] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.266246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.266838] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.266979] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.266994] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.267116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.268189] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.268304] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.269012] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.269513] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.269518] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.269628] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.295317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.295321] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.295438] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.295623] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.296639] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.296693] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.298047] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.322464] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.327175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.327276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.327750] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.327925] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.327944] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.328063] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.328533] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.329040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.329609] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.330789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.331887] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.332624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.332778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.332911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.333040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.333629] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.333769] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.333784] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.333905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.335008] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.335122] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.335807] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.336309] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.336314] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.336432] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.362628] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.362633] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.362754] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.362890] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.364388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.364468] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.365875] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.390251] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.394482] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.394566] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.395030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.395168] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.395186] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.395304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.395794] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.396298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.396874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.398004] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.398948] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.399709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.399863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.399997] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.400126] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.400715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.400854] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.400869] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.400991] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.402063] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.402176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.402873] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.403354] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.403359] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.403478] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.426980] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.426984] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.427091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.427228] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.428249] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.428284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.430467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.454831] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.460075] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.460229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.460728] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.460909] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.460929] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.461058] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.461539] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.462045] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.462631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.463789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.464888] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.465622] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.465777] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.465909] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.466038] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.466628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.466767] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.466783] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.466903] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.468006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.468120] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.468799] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.469306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.469311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.469431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.493466] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.493470] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.493579] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.493716] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.494736] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.494793] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.496140] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.520539] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.525384] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.525521] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.525992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.526143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.526163] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.526292] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.526791] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.527289] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.527868] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.529010] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.530121] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.530830] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.530985] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.531118] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.531246] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.531835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.531976] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.531991] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.532111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.533176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.533290] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.534004] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.534505] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.534510] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.534621] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.560839] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.560843] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.560964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.561100] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.562124] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.562161] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.563467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.587845] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.592611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.592741] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.593218] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.593369] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.593389] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.593530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.594036] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.594558] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.595112] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.596376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.597321] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.598086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.598240] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.598372] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.598522] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.599151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.599291] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.599306] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.599438] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.600514] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.600627] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.601311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.601813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.601818] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.601929] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.628156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.628160] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.628268] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.628405] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.629428] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.629464] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.630853] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.655245] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.659983] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.660080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.660555] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.660728] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.660746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.660866] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.661327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.661855] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.662404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.663666] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.664765] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.665533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.665685] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.665817] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.665946] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.666536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.666675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.666690] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.666811] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.667884] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.667998] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.668689] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.669191] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.669196] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.669307] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.695026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.695030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.695138] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.695273] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.696294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.696328] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.698747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.723062] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.727846] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.727974] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.728459] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.728644] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.728663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.728793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.729265] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.729788] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.730342] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.731618] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.732714] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.733455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.733616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.733746] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.733872] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.734487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.734652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.734666] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.734785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.736356] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.736474] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.737156] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.737670] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.737675] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.737816] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.764029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.764034] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.764141] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.764278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.765301] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.765336] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.767748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.792108] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.796849] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.796971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.797455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.797625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.797644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.797764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.798222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.798748] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.799301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.800460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.801415] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.802057] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.802211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.802344] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.802493] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.803071] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.803206] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.803221] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.803339] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.804408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.804528] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.805210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.805729] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.805755] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.805877] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.831567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.831571] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.831679] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.831815] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.832834] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.832891] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.834275] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.858702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.863566] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.863736] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.864211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.864361] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.864381] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.864523] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.865029] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.865552] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.866106] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.867229] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.868326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.869085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.869239] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.869372] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.869511] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.870091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.870231] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.870246] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.870367] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.871412] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.871535] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.872217] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.872742] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.872747] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.872858] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.899088] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.899092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.899200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.899336] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.900360] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.900394] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.901798] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.926168] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.930493] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.930616] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.931077] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.931213] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.931231] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.931347] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.931849] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [187.932332] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [187.932906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [187.934151] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [187.935250] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [187.935998] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [187.936154] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [187.936288] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [187.936417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [187.937008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.937147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [187.937162] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [187.937283] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.938367] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.938491] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [187.939176] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [187.939695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.939700] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [187.939811] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [187.966049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [187.966053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [187.966161] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.966298] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [187.967317] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [187.967354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [187.969726] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [187.994133] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [187.998497] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [187.998618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.999080] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [187.999216] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [187.999234] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [187.999350] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [187.999851] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.000334] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.000908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.002022] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.003122] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.003856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.004008] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.004140] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.004270] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.004864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.005004] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.005019] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.005140] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.006215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.006330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.007022] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.007545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.007551] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.007662] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.033946] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.033951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.034074] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.034239] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.035259] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.035298] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.037747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.062151] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.066449] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.066546] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.067011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.067150] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.067169] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.067288] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.067761] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.068266] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.068834] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.069991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.071082] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.071848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.072000] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.072133] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.072261] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.072863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.073035] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.073049] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.073168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.074219] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.074330] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.075000] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.075535] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.075563] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.075685] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.100288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.100292] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.100401] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.100589] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.101613] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.101649] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.103007] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.127389] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.132290] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.132419] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.132926] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.133089] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.133109] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.133237] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.133716] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.134224] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.134792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.135955] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.137039] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.137828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.137980] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.138111] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.138241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.138847] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.138984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.138999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.139116] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.140178] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.140289] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.140962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.141516] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.141521] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.141642] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.168968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.168972] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.169082] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.169219] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.170244] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.170284] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.172469] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.196868] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.201701] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.201855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.202322] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.202496] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.202534] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.202677] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.203150] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.203672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.204226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.205363] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.206456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.207243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.207395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.207552] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.207678] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.208257] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.208394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.208408] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.208535] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.209682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.209794] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.210778] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.211239] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.211244] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.211352] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.237575] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.237580] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.237701] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.237837] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.239324] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.239360] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.241750] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.266148] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.270470] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.270568] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.271032] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.271171] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.271189] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.271308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.271809] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.272298] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.272874] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.274000] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.275089] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.275826] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.275978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.276111] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.276240] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.276832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.276972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.276987] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.277108] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.278182] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.278296] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.279009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.279511] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.279517] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.279627] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.305863] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.305867] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.305988] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.306124] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.307149] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.307185] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.308467] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.332851] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.337673] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.337802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.338277] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.338439] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.338485] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.338628] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.339100] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.339622] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.340177] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.341305] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.342395] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.343166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.343317] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.343473] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.343636] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.344216] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.344352] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.344366] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.344494] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.346103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.346214] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.346893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.347368] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.347373] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.347491] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.374235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.374239] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.374347] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.374506] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.376015] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.376050] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.377461] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.401850] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.406683] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.406838] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.407306] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.407480] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.407518] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.407661] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.408134] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.408657] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.409211] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.410315] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.411410] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.412046] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.412197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.412330] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.412486] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.413065] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.413201] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.413215] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.413333] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.414432] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.414572] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.415253] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.415799] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.415804] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.415926] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.442732] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.442737] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.442846] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.442983] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.444474] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.444508] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.445901] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.470272] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.474453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.474556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.475020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.475158] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.475177] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.475296] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.475766] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.476285] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.476841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.477991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.479082] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.479829] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.479984] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.480116] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.480245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.480842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.480981] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.480997] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.481117] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.482172] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.482285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.482919] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.483502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.483508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.483620] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.507647] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.507651] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.507773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.507910] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.508940] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.508999] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.510351] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.534704] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.540070] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.540206] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.540721] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.540886] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.540906] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.541035] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.541530] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.542033] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.542592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.543711] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.544785] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.545558] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.545735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.545869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.545999] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.546589] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.546729] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.546744] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.546865] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.547962] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.548077] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.548769] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.549262] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.549267] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.549378] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.573975] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.573980] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.574091] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.574229] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.575251] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.575289] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.577748] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.602104] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.607365] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.607493] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.607955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.608147] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.608183] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.608318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.608802] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.609317] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.609916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.611040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.612004] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.612810] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.612967] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.613100] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.613229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.613861] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.614040] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.614055] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.614173] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.615812] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.615933] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.616652] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.617148] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.617154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.617270] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.642411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.642416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.642567] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.642754] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.644272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.644313] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.646747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.671153] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.676354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.676476] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.676949] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.677084] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.677102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.677217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.677724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.678192] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.678801] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.679954] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.681034] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.681621] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.681773] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.681907] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.682035] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.682656] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.682833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.682849] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.682968] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.683684] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.683801] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.684539] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.684987] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.684992] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.685100] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.709672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.709677] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.709803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.709941] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.711418] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.711461] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.712900] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.737250] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.741783] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.741913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.742393] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.742551] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.742594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.742728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.743191] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.743724] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.744275] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.745408] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.746459] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.747225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.747391] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.747532] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.747662] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.748255] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.748438] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.748458] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.748602] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.749679] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.749793] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.750483] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.750973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.750978] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.751089] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.777266] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.777271] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.777384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.777546] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.778609] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.778651] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.780026] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.804361] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.809709] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.809820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.810299] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.810479] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.810499] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.810631] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.811091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.811642] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.812170] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.813279] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.814377] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.814990] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.815177] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.815337] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.815477] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.816059] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.816198] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.816213] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.816335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.817411] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.817532] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.818220] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.818752] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.818757] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.818875] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.845706] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.845711] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.845823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.845961] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.846989] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.847028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.848462] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.872795] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.877447] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.877572] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.878055] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.878209] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.878235] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.878383] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.878867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.879381] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.879953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.881165] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.882266] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.883038] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.883194] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.883327] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.883467] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.884050] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.884190] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.884205] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.884327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.885408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.885567] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.886199] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.886793] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.886799] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.886921] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.912085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.912090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.912201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.912339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.913826] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.913865] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.915253] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [188.939609] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [188.945475] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [188.945582] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.946048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.946238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [188.946275] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [188.946404] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.946934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [188.947417] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [188.948005] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [188.949149] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [188.950251] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [188.951002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [188.951158] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [188.951291] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [188.951431] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [188.952024] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.952163] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [188.952179] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [188.952300] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [188.953380] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.953513] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [188.954198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [188.954726] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.954733] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [188.954854] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [188.978892] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [188.978897] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [188.979021] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [188.979159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [188.980183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [188.980220] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [188.982746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.007083] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.012362] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.012513] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.012987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.013122] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.013140] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.013256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.013774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.014230] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.014829] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.016135] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.017158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.017956] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.018112] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.018274] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.018456] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.019105] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.019242] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.019258] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.019377] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.021009] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.021119] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.021837] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.022881] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.022886] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.023044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.048818] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.048824] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.048936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.049074] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.050562] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.050602] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.052085] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.076490] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.081344] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.081492] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.081964] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.082125] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.082145] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.082274] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.082778] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.083272] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.083841] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.084953] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.086036] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.086803] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.086955] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.087088] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.087218] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.087825] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.087964] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.087979] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.088098] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.089235] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.089349] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.090041] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.090562] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.090567] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.090678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.114712] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.114716] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.114827] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.114964] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.115984] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.116020] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.118686] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.143037] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.147811] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.147935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.148410] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.148576] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.148619] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.148767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.149244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.149766] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.150320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.151456] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.152453] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.153211] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.153364] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.153525] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.153651] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.154242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.154378] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.154394] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.154527] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.155673] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.155787] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.156695] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.157199] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.157203] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.157339] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.181960] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.181965] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.182076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.182213] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.183710] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.183770] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.185096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.209460] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.214329] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.214449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.214925] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.215073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.215098] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.215223] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.215696] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.216212] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.216771] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.217927] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.219038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.219823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.219978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.220111] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.220241] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.220833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.220973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.220989] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.221110] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.222186] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.222300] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.223006] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.223510] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.223516] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.223632] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.247705] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.247710] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.247823] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.247960] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.248980] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.249017] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.251683] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.276039] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.280477] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.280579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.281047] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.281186] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.281205] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.281323] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.281808] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.282323] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.282907] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.284162] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.285253] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.285992] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.286145] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.286278] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.286408] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.287004] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.287143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.287158] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.287280] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.288366] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.288490] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.289173] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.289698] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.289703] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.289814] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.313290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.313294] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.313407] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.313583] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.314617] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.314656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.316029] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.340372] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.345268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.345397] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.345904] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.346101] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.346121] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.346251] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.346774] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.347238] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.347867] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.349020] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.350126] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.350835] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.350987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.351120] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.351250] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.351848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.351998] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.352013] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.352136] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.353244] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.353359] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.354053] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.354559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.354566] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.354688] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.378717] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.378722] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.378845] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.378982] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.379991] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.380028] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.381385] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.405715] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.411594] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.411727] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.412197] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.412343] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.412362] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.412550] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.413050] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.413591] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.414141] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.415434] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.416463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.417225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.417377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.417542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.417706] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.418297] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.418469] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.418516] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.418663] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.420268] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.420417] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.421124] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.421660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.421666] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.421829] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.446411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.446416] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.446586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.446765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.447816] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.447845] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.449268] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.473611] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.478435] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.478556] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.479031] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.479179] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.479199] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.479327] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.479878] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.480361] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.480930] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.482095] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.483162] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.483954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.484108] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.484243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.484373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.484977] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.485123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.485139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.485260] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.486334] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.486461] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.487144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.487655] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.487663] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.487784] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.512360] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.512365] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.512532] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.512681] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.513694] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.513719] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.515150] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.539488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.544937] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.545091] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.545660] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.545811] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.545830] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.545949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.546408] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.546942] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.547537] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.548693] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.549784] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.550556] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.550709] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.550843] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.550973] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.551576] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.551752] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.551768] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.551916] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.553016] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.553131] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.553798] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.554306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.554311] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.554431] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.577970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.577975] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.578087] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.578224] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.579254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.579292] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.581749] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.606158] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.611059] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.611196] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.611712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.611865] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.611883] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.612033] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.612520] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.613018] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.613587] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.614742] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.615703] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.616461] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.616626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.616755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.616882] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.617471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.617642] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.617658] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.617777] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.618851] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.618967] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.619659] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.620149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.620154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.620303] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.644427] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.644433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.644604] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.644741] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.646218] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.646253] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.648746] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.673120] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.677798] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.677928] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.678417] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.678573] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.678593] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.678731] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.679226] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.679751] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.680304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.681459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.682455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.683242] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.683399] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.683541] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.683671] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.684252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.684392] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.684407] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.684536] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.685612] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.685739] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.686419] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.686931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.686936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.687053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.713304] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.713309] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.713421] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.713631] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.714652] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.714717] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.716094] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.740468] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.745232] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.745340] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.745856] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.746005] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.746025] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.746159] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.746641] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.747137] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.747745] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.748903] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.750001] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.750783] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.750936] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.751084] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.751245] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.751848] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.751988] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.752005] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.752127] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.753184] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.753298] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.753999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.754502] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.754508] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.754619] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.779154] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.779159] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.779273] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.779412] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.780972] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.781011] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.782364] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.806702] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.812597] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.812713] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.813169] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.813357] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.813380] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.813561] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.814045] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.814568] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.815132] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.816376] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.817316] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.818109] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.818267] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.818401] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.818539] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.819131] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.819272] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.819287] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.819409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.820504] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.820632] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.821315] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.821824] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.821831] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.821979] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.848219] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.848223] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.848334] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.848530] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.849551] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.849617] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.851008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.875350] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.880739] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.880873] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.881395] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.881615] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.881635] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.881792] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.882256] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.882795] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.883343] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.884461] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.885466] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.886262] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.886419] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.886564] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.886693] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.887286] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.887434] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.887449] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.887571] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.888656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.888784] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.889467] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.889973] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.889979] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.890133] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.917406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.917411] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.917531] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.917720] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.919261] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.919304] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.921763] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [189.946175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [189.950776] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [189.950899] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.951383] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.951564] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [189.951608] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [189.951742] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.952205] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [189.952754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [189.953281] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [189.954458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [189.955456] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [189.956227] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [189.956405] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [189.956547] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [189.956677] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [189.957259] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.957398] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [189.957413] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [189.957544] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [189.958630] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.958744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [189.959440] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [189.959932] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.959937] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [189.960062] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [189.986329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [189.986334] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [189.986489] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [189.986646] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [189.988143] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [189.988184] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [189.989434] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.013785] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.019082] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.019217] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.019738] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.019920] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.019940] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.020069] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.020592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.021072] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.021626] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.022790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.023880] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.024624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.024778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.024911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.025040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.025632] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.025771] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.025787] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.025908] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.026981] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.027095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.027790] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.028281] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.028287] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.028397] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.051316] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.051320] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.051444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.051621] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.052624] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.052661] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.054042] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.078391] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.083824] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.083965] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.084471] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.084636] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.084656] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.084785] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.085255] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.085780] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.086334] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.087459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.088455] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.089243] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.089396] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.089543] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.089672] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.090254] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.090394] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.090409] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.090538] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.091613] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.091727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.092408] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.092914] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.092919] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.093030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.115970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.115974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.116085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.116221] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.117703] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.117744] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.120408] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.144878] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.149652] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.149781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.150252] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.150401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.150433] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.150589] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.151075] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.151597] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.152162] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.153413] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.154373] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.155134] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.155288] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.155421] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.155561] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.156155] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.156294] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.156309] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.156440] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.157525] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.157640] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.158319] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.158829] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.158834] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.158945] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.181870] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.181874] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.181987] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.182126] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.183152] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.183187] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.185779] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.210193] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.214472] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.214575] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.215039] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.215178] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.215197] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.215316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.215831] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.216318] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.216905] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.218040] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.218693] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.219455] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.219606] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.219739] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.219867] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.220470] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.220610] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.220626] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.220747] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.221845] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.221970] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.222663] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.223153] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.223159] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.223269] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.247322] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.247326] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.247488] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.247649] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.248721] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.248746] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.250097] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.274454] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.279203] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.279317] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.279813] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.279959] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.279977] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.280125] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.280625] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.281102] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.281694] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.282862] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.283953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.284712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.284864] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.284998] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.285127] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.285723] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.285871] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.285887] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.286009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.287082] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.287198] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.287885] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.288366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.288371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.288492] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.313089] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.313094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.313204] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.313341] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.314833] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.314873] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.317414] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.341756] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.346485] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.346607] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.347088] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.347230] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.347250] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.347369] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.347918] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.348411] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.348980] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.350146] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.350949] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.351713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.351876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.352010] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.352138] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.352747] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.352893] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.352908] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.353039] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.354165] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.354277] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.354977] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.355471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.355477] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.355608] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.381306] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.381311] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.381435] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.381630] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.383126] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.383166] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.385753] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.410140] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.414790] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.414913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.415384] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.415590] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.415631] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.415767] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.416229] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.416754] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.417316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.418462] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.419462] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.420224] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.420377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.420531] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.420668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.421261] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.421401] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.421416] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.421554] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.422647] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.422770] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.423464] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.423962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.423967] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.424078] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.448116] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.448120] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.448231] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.448368] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.449412] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.449495] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.450918] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.475305] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.479826] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.479949] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.480440] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.480628] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.480647] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.480768] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.481233] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.481769] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.482309] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.483459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.484463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.485223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.485376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.485527] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.485665] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.486247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.486386] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.486402] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.486540] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.487622] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.487744] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.488418] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.488927] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.488934] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.489053] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.514703] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.514707] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.514831] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.514968] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.516453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.516490] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.517884] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.542222] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.546474] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.546576] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.547040] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.547178] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.547196] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.547316] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.547833] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.548341] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.548926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.550044] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.551188] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.551814] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.551966] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.552099] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.552229] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.552840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.552985] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.553001] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.553119] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.554225] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.554350] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.555583] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.556113] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.556118] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.556225] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.581902] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.581907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.582030] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.582167] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.583659] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.583698] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.585049] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.609401] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.614300] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.614409] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.614909] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.615052] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.615071] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.615192] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.615698] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.616181] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.616798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.617907] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.618787] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.619551] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.619704] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.619837] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.619966] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.620571] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.620722] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.620738] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.620859] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.621957] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.622072] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.622747] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.623265] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.623270] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.623381] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.647970] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.647975] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.648086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.648223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.649735] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.649799] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.651130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.675465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.680241] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.680356] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.680852] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.680997] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.681016] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.681135] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.681642] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.682112] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.682718] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.683878] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.684955] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.685715] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.685869] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.686002] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.686131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.686732] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.686880] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.686896] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.687017] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.688093] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.688207] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.688893] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.689372] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.689377] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.689501] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.715180] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.715185] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.715295] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.715463] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.716501] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.716559] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.718008] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.742340] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.747214] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.747344] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.747842] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.747990] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.748023] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.748156] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.748671] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.749144] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.749724] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.750956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.752038] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.752821] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.752973] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.753107] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.753236] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.753844] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.753995] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.754010] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.754133] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.755209] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.755324] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.756019] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.756545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.756552] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.756672] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.781817] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.781838] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.782002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.782174] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.783691] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.783759] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.785138] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.809502] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.814819] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.814937] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.815413] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.815613] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.815638] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.815758] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.816215] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.816755] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.817297] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.818457] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.819464] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.820226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.820378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.820530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.820668] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.821250] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.821388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.821404] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.821541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.822605] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.822727] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.823407] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.823911] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.823918] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.824037] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.848023] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.848028] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.848137] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.848274] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.849766] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.849801] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.852441] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.876801] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.881453] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.881574] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.882048] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.882196] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.882216] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.882374] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.882892] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.883374] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.883943] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.885063] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.886165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.886959] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.887123] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.887253] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.887379] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.887981] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.888123] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.888139] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.888257] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.889321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.889456] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.890151] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.890674] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.890680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.890831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.915971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.915975] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.916086] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.916223] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.917254] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.917297] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.919780] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [190.944171] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [190.949613] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [190.949740] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.950201] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.950337] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [190.950354] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [190.950506] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.951009] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [190.951546] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [190.952096] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [190.953259] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [190.954326] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [190.955085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [190.955238] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [190.955371] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [190.955520] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [190.956122] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.956263] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [190.956278] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [190.956400] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [190.957515] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.957631] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [190.958311] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [190.958825] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.958832] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [190.958951] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [190.984087] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [190.984092] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [190.984202] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [190.984339] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [190.985827] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [190.985866] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [190.987131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.011517] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.016897] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.017040] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.017540] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.017717] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.017735] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.017855] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.018318] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.018834] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.019406] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.020685] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.021786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.022550] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.022712] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.022842] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.022969] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.023586] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.023799] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.023815] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.023933] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.025046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.025161] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.026149] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.026659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.026680] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.026809] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.051969] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.051974] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.052085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.052222] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.053718] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.053758] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.055096] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.079420] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.084875] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.084998] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.085505] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.085682] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.085701] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.085820] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.086282] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.086823] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.087370] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.088671] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.089763] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.090464] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.090617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.090750] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.090879] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.091487] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.091636] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.091652] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.091773] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.092848] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.092966] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.093658] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.094149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.094154] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.094266] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.118333] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.118337] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.118482] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.118632] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.119625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.119666] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.121131] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.145521] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.150330] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.150454] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.150929] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.151079] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.151099] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.151228] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.151721] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.152227] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.152793] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.153913] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.155004] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.155767] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.155920] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.156053] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.156182] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.156779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.156928] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.156943] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.157065] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.158144] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.158258] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.158894] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.159467] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.159474] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.159596] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.182523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.182528] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.182641] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.182782] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.184277] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.184315] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.186747] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.211105] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.215803] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.215926] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.216400] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.216569] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.216594] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.216746] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.217236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.217760] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.218324] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.219458] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.220464] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.221225] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.221378] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.221530] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.221667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.222260] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.222400] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.222415] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.222552] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.223656] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.223777] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.224468] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.224957] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.224962] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.225072] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.250236] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.250240] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.250350] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.250551] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.251574] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.251600] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.253030] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.277354] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.282200] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.282308] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.282804] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.282948] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.282982] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.283114] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.283592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.284103] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.284695] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.285789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.286881] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.287625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.287778] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.287911] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.288040] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.288645] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.288820] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.288836] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.288957] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.290032] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.290148] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.290858] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.291340] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.291345] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.291466] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.314429] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.314433] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.314572] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.314709] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.315723] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.315765] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.317148] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.341509] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.346840] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.346969] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.347495] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.347656] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.347675] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.347822] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.348311] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.348800] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.349361] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.350629] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.351719] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.352462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.352625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.352755] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.352881] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.353499] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.353674] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.353691] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.353812] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.354889] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.355010] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.355707] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.356196] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.356201] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.356312] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.380362] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.380366] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.380536] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.380719] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.381738] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.381763] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.383129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.407417] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.412235] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.412345] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.412840] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.412983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.413002] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.413123] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.413601] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.414111] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.414703] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.415789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.416882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.417625] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.417787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.417917] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.418044] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.418646] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.418848] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.418864] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.418983] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.420103] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.420215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.421398] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.421919] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.421924] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.422032] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.448208] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.448212] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.448323] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.448523] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.449577] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.449601] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.451028] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.475351] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.480195] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.480304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.480800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.480973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.480992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.481111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.481592] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.482099] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.482691] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.483789] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.484882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.485626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.485779] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.485912] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.486041] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.486648] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.486797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.486813] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.486934] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.487991] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.488105] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.488774] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.489273] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.489278] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.489389] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.515085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.515090] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.515200] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.515337] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.516365] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.516402] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.517833] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.542175] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.547371] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.547502] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.547978] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.548154] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.548174] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.548313] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.548816] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.549325] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.549920] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.551170] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.552261] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.552996] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.553151] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.553285] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.553413] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.554029] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.554175] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.554191] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.554312] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.555404] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.555527] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.556211] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.556731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.556739] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.556902] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.580903] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.580907] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.581020] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.581160] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.582675] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.582736] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.584129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.608465] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.613268] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.613382] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.613880] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.614025] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.614043] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.614163] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.614684] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.615152] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.615729] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.616956] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.618039] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.618820] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.618972] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.619105] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.619235] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.619833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.619983] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.619999] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.620120] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.621215] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.621329] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.622027] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.622546] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.622553] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.622675] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.646700] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.646705] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.646828] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.646965] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.648453] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.648491] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.649912] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.674277] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.678833] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.678963] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.679479] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.679644] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.679663] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.679783] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.680247] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.680770] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.681322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.682460] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.683465] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.684226] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.684380] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.684542] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.684712] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.685301] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.685456] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.685474] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.685593] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.686682] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.686815] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.687553] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.688029] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.688034] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.688183] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.714409] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.714413] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.714580] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.714760] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.715817] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.715843] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.718443] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.742810] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.747502] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.747623] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.748097] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.748245] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.748264] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.748393] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.748913] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.749432] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.749994] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.751127] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.752166] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.752957] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.753110] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.753243] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.753373] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.754011] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.754167] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.754183] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.754301] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.755431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.755547] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.756573] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.757026] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.757031] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.757195] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.783369] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.783374] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.783543] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.783723] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.784744] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.784771] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.786130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.810467] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.815314] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.815446] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.815944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.816083] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.816102] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.816222] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.816728] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.817211] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.817814] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.818958] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.820042] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.820833] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.820986] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.821119] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.821249] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.821857] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.822006] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.822022] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.822144] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.823221] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.823336] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.824045] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.824550] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.824558] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.824678] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.850343] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.850347] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.850515] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.850694] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.851684] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.851750] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.853130] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.877516] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.882325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.882449] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.882924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.883072] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.883091] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.883220] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.883788] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.884257] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.884835] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.885991] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.887084] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.887849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.888002] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.888136] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.888265] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.888875] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.889049] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.889064] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.889183] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.890285] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.890396] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.891117] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.891639] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.891645] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.891795] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.915826] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.915831] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.915954] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.916091] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.917578] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.917616] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.918999] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [191.943377] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [191.948187] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [191.948298] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.948798] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.948945] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [191.948965] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [191.949088] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.949569] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [191.950079] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [191.950657] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [191.951900] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [191.952993] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [191.953757] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [191.953910] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [191.954043] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [191.954172] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [191.954769] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.954918] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [191.954934] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [191.955056] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [191.956097] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.956212] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [191.956905] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [191.957377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.957382] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [191.957506] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [191.983184] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [191.983189] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [191.983300] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [191.983491] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [191.984560] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [191.984585] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [191.986018] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.010397] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.015159] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.015272] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.015765] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.015973] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.015992] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.016111] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.016643] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.017118] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.017711] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.018795] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.019888] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.020626] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.020780] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.020913] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.021043] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.021649] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.021798] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.021814] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.021935] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.022999] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.023114] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.023785] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.024294] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.024300] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.024410] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.049545] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.049550] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.049674] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.049811] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.051304] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.051344] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.052831] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.077190] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.081830] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.081956] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.082444] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.082625] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.082644] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.082764] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.083214] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.083763] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.084304] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.085459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.086463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.087222] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.087376] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.087528] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.087666] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.088247] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.088387] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.088403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.088542] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.089625] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.089748] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.090443] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.090943] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.090948] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.091059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.116233] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.116238] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.116349] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.116571] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.117592] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.117630] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.119020] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.143368] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.148226] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.148335] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.148832] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.148990] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.149009] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.149142] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.149620] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.150131] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.150722] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.151790] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.152882] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.153624] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.153786] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.153916] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.154042] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.154635] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.154819] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.154834] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.154953] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.156046] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.156158] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.157383] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.157931] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.157936] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.158044] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.184272] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.184277] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.184387] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.184609] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.185643] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.185669] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.187054] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.211390] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.216257] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.216365] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.216863] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.217037] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.217056] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.217176] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.217655] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.218165] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.218756] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.219891] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.220953] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.221713] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.221866] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.221999] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.222128] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.222735] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.222882] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.222898] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.223019] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.224095] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.224210] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.224891] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.225366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.225371] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.225496] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.250090] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.250094] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.250205] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.250342] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.251829] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.251871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.253127] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.277488] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.282346] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.282482] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.282965] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.283127] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.283147] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.283276] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.283795] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.284274] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.284843] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.285999] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.287093] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.287837] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.287989] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.288123] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.288252] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.288876] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.289051] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.289067] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.289185] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.290257] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.290401] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.291098] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.291632] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.291639] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.291815] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.318557] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.318562] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.318684] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.318821] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.319836] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.319875] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.322417] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.346759] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.351991] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.352137] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.352670] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.352852] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.352871] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.352990] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.353470] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.353978] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.354545] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.355699] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.356786] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.357548] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.357726] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.357869] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.357996] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.358617] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.358790] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.358805] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.358924] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.359978] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.360092] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.360786] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.361278] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.361283] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.361394] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.386025] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.386030] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.386140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.386278] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.387797] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.387859] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.389129] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.413521] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.418325] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.418450] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.418924] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.419073] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.419092] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.419221] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.419754] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.420219] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.420786] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.422045] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.423158] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.423923] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.424076] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.424210] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.424339] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.424943] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.425089] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.425104] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.425227] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.426321] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.426442] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.427125] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.427660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.427667] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.427791] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.452356] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.452361] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.452533] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.452713] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.453692] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.453730] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.455159] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.479551] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.484894] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.485014] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.485563] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.485724] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.485743] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.485862] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.486314] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.486853] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.487401] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.488668] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.489759] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.490462] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.490616] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.490749] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.490877] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.491473] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.491622] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.491638] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.491759] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.492827] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.492951] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.493645] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.494129] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.494134] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.494245] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.517721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.517726] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.517849] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.517985] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.519003] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.519039] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.520431] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.544751] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.549436] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.549558] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.550034] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.550183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.550203] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.550360] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.550882] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.551390] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.551958] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.553072] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.554165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.554931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.555085] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.555218] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.555348] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.555952] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.556098] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.556114] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.556236] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.557308] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.557431] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.558116] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.558634] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.558641] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.558762] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.582815] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.582820] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.582932] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.583072] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.584587] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.584626] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.586003] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.610383] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.615689] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.615798] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.616274] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.616448] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.616487] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.616618] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.617080] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.617615] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.618168] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.619283] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.620375] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.621140] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.621293] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.621441] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.621578] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.622172] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.622312] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.622328] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.622471] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.623565] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.623688] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.624351] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.624866] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.624874] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.624994] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.650076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.650081] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.650192] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.650328] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.651340] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.651378] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.652800] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.677144] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.681476] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.681579] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.682044] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.682183] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.682202] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.682322] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.682844] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.683340] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.683909] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.685061] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.686165] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.686931] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.687083] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.687217] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.687346] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.687961] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.688107] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.688123] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.688245] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.689322] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.689447] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.690133] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.690659] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.690665] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.690788] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.716512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.716517] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.716627] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.716765] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.718258] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.718299] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.720752] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.745141] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.750303] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.750455] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.750947] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.751086] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.751105] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.751224] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.751702] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.752202] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.752827] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.753920] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.755010] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.755787] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.755941] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.756074] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.756203] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.756800] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.756949] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.756965] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.757086] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.758159] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.758274] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.758985] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.759481] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.759488] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.759609] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.784175] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.784180] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.784290] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.784455] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.785518] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.785577] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.786944] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <7> [192.811267] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.815848] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.815971] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.816480] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.816642] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.816662] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.816781] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.817244] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.817768] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.818320] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.819459] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00 <7> [192.820463] i915 0000:00:02.0: [drm:drm_dp_read_desc [drm_display_helper]] AUX C/DDI C/PHY C: DP branch: OUI 00-60-37 dev-ID 3355N2 HW-rev 1.0 SW-rev 1.3 quirks 0x0000 <7> [192.821223] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2 <7> [192.821377] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off <7> [192.821529] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6 <7> [192.821667] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02 <7> [192.822249] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.822388] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:107:DP-2] Same epoch counter 1 <7> [192.822403] i915 0000:00:02.0: [drm:intel_hdmi_detect [i915]] [CONNECTOR:113:HDMI-A-1] <7> [192.822541] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.823638] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.823760] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry <7> [192.824452] i915 0000:00:02.0: [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1) <7> [192.824944] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.824949] i915 0000:00:02.0: [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [192.825059] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1 <7> [192.850173] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc <7> [192.850178] i915 0000:00:02.0: [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0 <7> [192.850287] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.850436] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Suspending device <7> [192.851525] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:113:HDMI-A-1] Same epoch counter 1 <7> [192.851549] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:95:DP-1] <7> [192.852971] i915 0000:00:02.0: [drm:intel_runtime_suspend [i915]] Device suspended <6> [192.866242] [IGT] i915_pm_rpm: exiting, ret=77 <7> [192.877342] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Resuming device <7> [192.882327] i915 0000:00:02.0: [drm:intel_runtime_resume [i915]] Device resumed <7> [192.882434] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.882940] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling always-on <7> [192.883238] i915 0000:00:02.0: [drm:check_connector_changed [drm_kms_helper]] [CONNECTOR:95:DP-1] Same epoch counter 1 <7> [192.883257] i915 0000:00:02.0: [drm:intel_dp_detect [i915]] [CONNECTOR:107:DP-2] <7> [192.883378] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling always-on <7> [192.883906] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling DC_off <7> [192.884399] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 02 to 00 <7> [192.884993] i915 0000:00:02.0: [drm:intel_power_well_enable [i915]] enabling PW_2 <7> [192.886097] i915 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX C/DDI C/PHY C: DPCD: 12 0a 82 01 00 03 01 81 00 01 00 00 00 00 00

Created at 2023-07-17 00:31:04